Merge 5.7-rc7 into driver-core-next

We need the driver core fixes in here as well

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Greg Kroah-Hartman 2020-05-25 08:55:12 +02:00
commit f7d8f3f092
609 changed files with 5061 additions and 2494 deletions

View File

@ -288,6 +288,8 @@ Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@virtuozzo.com>
Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@parallels.com>
Takashi YOSHII <takashi.yoshii.zj@renesas.com>
Will Deacon <will@kernel.org> <will.deacon@arm.com>
Wolfram Sang <wsa@kernel.org> <wsa@the-dreams.de>
Wolfram Sang <wsa@kernel.org> <w.sang@pengutronix.de>
Yakir Yang <kuankuan.y@gmail.com> <ykk@rock-chips.com>
Yusuke Goda <goda.yusuke@renesas.com>
Gustavo Padovan <gustavo@las.ic.unicamp.br>

View File

@ -112,6 +112,20 @@ used when printing stack backtraces. The specifier takes into
consideration the effect of compiler optimisations which may occur
when tail-calls are used and marked with the noreturn GCC attribute.
Probed Pointers from BPF / tracing
----------------------------------
::
%pks kernel string
%pus user string
The ``k`` and ``u`` specifiers are used for printing prior probed memory from
either kernel memory (k) or user memory (u). The subsequent ``s`` specifier
results in printing a string. For direct use in regular vsnprintf() the (k)
and (u) annotation is ignored, however, when used out of BPF's bpf_trace_printk(),
for example, it reads the memory it is pointing to without faulting.
Kernel Pointers
---------------

View File

@ -10,7 +10,8 @@ Required properties:
- compatible :
- "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC
- "fsl,imx7ulp-edma" for eDMA2 used similar to that on i.mx7ulp
- "fsl,fsl,ls1028a-edma" for eDMA used similar to that on Vybrid vf610 SoC
- "fsl,ls1028a-edma" followed by "fsl,vf610-edma" for eDMA used on the
LS1028A SoC.
- reg : Specifies base physical address(s) and size of the eDMA registers.
The 1st region is eDMA control register's address and size.
The 2nd and the 3rd regions are programmable channel multiplexing

View File

@ -110,6 +110,9 @@ Ethernet switch connected via MDIO to the host, CPU port wired to eth0:
#size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port0@0 {
reg = <0>;
label = "lan1";

View File

@ -27,9 +27,8 @@ differences are:
3. Raw Gadget provides a way to select a UDC device/driver to bind to,
while GadgetFS currently binds to the first available UDC.
4. Raw Gadget uses predictable endpoint names (handles) across different
UDCs (as long as UDCs have enough endpoints of each required transfer
type).
4. Raw Gadget explicitly exposes information about endpoints addresses and
capabilities allowing a user to write UDC-agnostic gadgets.
5. Raw Gadget has ioctl-based interface instead of a filesystem-based one.
@ -50,12 +49,36 @@ The typical usage of Raw Gadget looks like:
Raw Gadget and react to those depending on what kind of USB device
needs to be emulated.
Note, that some UDC drivers have fixed addresses assigned to endpoints, and
therefore arbitrary endpoint addresses can't be used in the descriptors.
Nevertheles, Raw Gadget provides a UDC-agnostic way to write USB gadgets.
Once a USB_RAW_EVENT_CONNECT event is received via USB_RAW_IOCTL_EVENT_FETCH,
the USB_RAW_IOCTL_EPS_INFO ioctl can be used to find out information about
endpoints that the UDC driver has. Based on that information, the user must
chose UDC endpoints that will be used for the gadget being emulated, and
properly assign addresses in endpoint descriptors.
You can find usage examples (along with a test suite) here:
https://github.com/xairy/raw-gadget
Internal details
~~~~~~~~~~~~~~~~
Currently every endpoint read/write ioctl submits a USB request and waits until
its completion. This is the desired mode for coverage-guided fuzzing (as we'd
like all USB request processing happen during the lifetime of a syscall),
and must be kept in the implementation. (This might be slow for real world
applications, thus the O_NONBLOCK improvement suggestion below.)
Potential future improvements
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Implement ioctl's for setting/clearing halt status on endpoints.
- Reporting more events (suspend, resume, etc.) through
USB_RAW_IOCTL_EVENT_FETCH.
- Report more events (suspend, resume, etc.) through USB_RAW_IOCTL_EVENT_FETCH.
- Support O_NONBLOCK I/O.
- Support USB 3 features (accept SS endpoint companion descriptor when
enabling endpoints; allow providing stream_id for bulk transfers).
- Support ISO transfer features (expose frame_number for completed requests).

View File

@ -5507,10 +5507,10 @@ F: drivers/gpu/drm/vboxvideo/
DRM DRIVER FOR VMWARE VIRTUAL GPU
M: "VMware Graphics" <linux-graphics-maintainer@vmware.com>
M: Thomas Hellstrom <thellstrom@vmware.com>
M: Roland Scheidegger <sroland@vmware.com>
L: dri-devel@lists.freedesktop.org
S: Supported
T: git git://people.freedesktop.org/~thomash/linux
T: git git://people.freedesktop.org/~sroland/linux
F: drivers/gpu/drm/vmwgfx/
F: include/uapi/drm/vmwgfx_drm.h
@ -7829,7 +7829,7 @@ T: git git://linuxtv.org/media_tree.git
F: drivers/media/platform/sti/hva
HWPOISON MEMORY FAILURE HANDLING
M: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
M: Naoya Horiguchi <naoya.horiguchi@nec.com>
L: linux-mm@kvack.org
S: Maintained
F: mm/hwpoison-inject.c
@ -7941,7 +7941,7 @@ F: Documentation/i2c/busses/i2c-parport.rst
F: drivers/i2c/busses/i2c-parport.c
I2C SUBSYSTEM
M: Wolfram Sang <wsa@the-dreams.de>
M: Wolfram Sang <wsa@kernel.org>
L: linux-i2c@vger.kernel.org
S: Maintained
W: https://i2c.wiki.kernel.org/
@ -9185,6 +9185,11 @@ L: kexec@lists.infradead.org
S: Maintained
W: http://lse.sourceforge.net/kdump/
F: Documentation/admin-guide/kdump/
F: fs/proc/vmcore.c
F: include/linux/crash_core.h
F: include/linux/crash_dump.h
F: include/uapi/linux/vmcore.h
F: kernel/crash_*.c
KEENE FM RADIO TRANSMITTER DRIVER
M: Hans Verkuil <hverkuil@xs4all.nl>
@ -10662,6 +10667,13 @@ L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/mediatek/
MEDIATEK I2C CONTROLLER DRIVER
M: Qii Wang <qii.wang@mediatek.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
F: drivers/i2c/busses/i2c-mt65xx.c
MEDIATEK JPEG DRIVER
M: Rick Chang <rick.chang@mediatek.com>
M: Bin Liu <bin.liu@mediatek.com>
@ -11710,8 +11722,9 @@ F: net/core/drop_monitor.c
NETWORKING DRIVERS
M: "David S. Miller" <davem@davemloft.net>
M: Jakub Kicinski <kuba@kernel.org>
L: netdev@vger.kernel.org
S: Odd Fixes
S: Maintained
W: http://www.linuxfoundation.org/en/Net
Q: http://patchwork.ozlabs.org/project/netdev/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
@ -14634,6 +14647,7 @@ F: drivers/iommu/s390-iommu.c
S390 IUCV NETWORK LAYER
M: Julian Wiedmann <jwi@linux.ibm.com>
M: Karsten Graul <kgraul@linux.ibm.com>
M: Ursula Braun <ubraun@linux.ibm.com>
L: linux-s390@vger.kernel.org
S: Supported
@ -14644,6 +14658,7 @@ F: net/iucv/
S390 NETWORK DRIVERS
M: Julian Wiedmann <jwi@linux.ibm.com>
M: Karsten Graul <kgraul@linux.ibm.com>
M: Ursula Braun <ubraun@linux.ibm.com>
L: linux-s390@vger.kernel.org
S: Supported

View File

@ -2,7 +2,7 @@
VERSION = 5
PATCHLEVEL = 7
SUBLEVEL = 0
EXTRAVERSION = -rc5
EXTRAVERSION = -rc7
NAME = Kleptomaniac Octopus
# *DOCUMENTATION*

View File

@ -65,6 +65,7 @@ CONFIG_DRM_UDL=y
CONFIG_DRM_ETNAVIV=y
CONFIG_FB=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y

View File

@ -15,12 +15,14 @@
/* clobbers r5 register */
.macro DSP_EARLY_INIT
#ifdef CONFIG_ISA_ARCV2
lr r5, [ARC_AUX_DSP_BUILD]
bmsk r5, r5, 7
breq r5, 0, 1f
mov r5, DSP_CTRL_DISABLED_ALL
sr r5, [ARC_AUX_DSP_CTRL]
1:
#endif
.endm
/* clobbers r10, r11 registers pair */

View File

@ -233,6 +233,8 @@
#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
__RESTORE_REGFILE_HARD
; SP points to PC/STAT32: hw restores them despite NO_AUTOSAVE
add sp, sp, SZ_PT_REGS - 8
#else
add sp, sp, PT_r0

View File

@ -3,9 +3,6 @@
# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
#
# Pass UTS_MACHINE for user_regset definition
CFLAGS_ptrace.o += -DUTS_MACHINE='"$(UTS_MACHINE)"'
obj-y := arcksyms.o setup.o irq.o reset.o ptrace.o process.o devtree.o
obj-y += signal.o traps.o sys.o troubleshoot.o stacktrace.o disasm.o
obj-$(CONFIG_ISA_ARCOMPACT) += entry-compact.o intc-compact.o

View File

@ -253,7 +253,7 @@ static const struct user_regset arc_regsets[] = {
};
static const struct user_regset_view user_arc_view = {
.name = UTS_MACHINE,
.name = "arc",
.e_machine = EM_ARC_INUSE,
.regsets = arc_regsets,
.n = ARRAY_SIZE(arc_regsets)

View File

@ -11,6 +11,7 @@
#include <linux/clocksource.h>
#include <linux/console.h>
#include <linux/module.h>
#include <linux/sizes.h>
#include <linux/cpu.h>
#include <linux/of_clk.h>
#include <linux/of_fdt.h>
@ -424,12 +425,12 @@ static void arc_chk_core_config(void)
if ((unsigned int)__arc_dccm_base != cpu->dccm.base_addr)
panic("Linux built with incorrect DCCM Base address\n");
if (CONFIG_ARC_DCCM_SZ != cpu->dccm.sz)
if (CONFIG_ARC_DCCM_SZ * SZ_1K != cpu->dccm.sz)
panic("Linux built with incorrect DCCM Size\n");
#endif
#ifdef CONFIG_ARC_HAS_ICCM
if (CONFIG_ARC_ICCM_SZ != cpu->iccm.sz)
if (CONFIG_ARC_ICCM_SZ * SZ_1K != cpu->iccm.sz)
panic("Linux built with incorrect ICCM Size\n");
#endif

View File

@ -191,10 +191,9 @@ void show_regs(struct pt_regs *regs)
if (user_mode(regs))
show_faulting_vma(regs->ret); /* faulting code, not data */
pr_info("ECR: 0x%08lx EFA: 0x%08lx ERET: 0x%08lx\n",
regs->event, current->thread.fault_address, regs->ret);
pr_info("STAT32: 0x%08lx", regs->status32);
pr_info("ECR: 0x%08lx EFA: 0x%08lx ERET: 0x%08lx\nSTAT: 0x%08lx",
regs->event, current->thread.fault_address, regs->ret,
regs->status32);
#define STS_BIT(r, bit) r->status32 & STATUS_##bit##_MASK ? #bit" " : ""
@ -210,11 +209,10 @@ void show_regs(struct pt_regs *regs)
(regs->status32 & STATUS_U_MASK) ? "U " : "K ",
STS_BIT(regs, DE), STS_BIT(regs, AE));
#endif
pr_cont(" BTA: 0x%08lx\n", regs->bta);
pr_info("BLK: %pS\n SP: 0x%08lx FP: 0x%08lx\n",
(void *)regs->blink, regs->sp, regs->fp);
pr_cont(" BTA: 0x%08lx\n SP: 0x%08lx FP: 0x%08lx BLK: %pS\n",
regs->bta, regs->sp, regs->fp, (void *)regs->blink);
pr_info("LPS: 0x%08lx\tLPE: 0x%08lx\tLPC: 0x%08lx\n",
regs->lp_start, regs->lp_end, regs->lp_count);
regs->lp_start, regs->lp_end, regs->lp_count);
/* print regs->r0 thru regs->r12
* Sequential printing was generating horrible code

View File

@ -1178,11 +1178,9 @@ int arc_unwind(struct unwind_frame_info *frame)
#endif
/* update frame */
#ifndef CONFIG_AS_CFI_SIGNAL_FRAME
if (frame->call_frame
&& !UNW_DEFAULT_RA(state.regs[retAddrReg], state.dataAlign))
frame->call_frame = 0;
#endif
cfa = FRAME_REG(state.cfa.reg, unsigned long) + state.cfa.offs;
startLoc = min_t(unsigned long, UNW_SP(frame), cfa);
endLoc = max_t(unsigned long, UNW_SP(frame), cfa);

View File

@ -6,6 +6,7 @@
menuconfig ARC_PLAT_EZNPS
bool "\"EZchip\" ARC dev platform"
depends on ISA_ARCOMPACT
select CPU_BIG_ENDIAN
select CLKSRC_NPS if !PHYS_ADDR_T_64BIT
select EZNPS_GIC

View File

@ -12,6 +12,7 @@ config ARM
select ARCH_HAS_KEEPINITRD
select ARCH_HAS_KCOV
select ARCH_HAS_MEMBARRIER_SYNC_CORE
select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
select ARCH_HAS_PTE_SPECIAL if ARM_LPAE
select ARCH_HAS_PHYS_TO_DMA
select ARCH_HAS_SETUP_DMA_OPS

View File

@ -40,3 +40,7 @@
status = "okay";
dual_emac;
};
&m_can0 {
status = "disabled";
};

View File

@ -172,6 +172,7 @@
#address-cells = <1>;
ranges = <0x51000000 0x51000000 0x3000
0x0 0x20000000 0x10000000>;
dma-ranges;
/**
* To enable PCI endpoint mode, disable the pcie1_rc
* node and enable pcie1_ep mode.
@ -185,7 +186,6 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x20013000 0x13000 0 0xffed000>;
dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
@ -230,6 +230,7 @@
#address-cells = <1>;
ranges = <0x51800000 0x51800000 0x3000
0x0 0x30000000 0x10000000>;
dma-ranges;
status = "disabled";
pcie2_rc: pcie@51800000 {
reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
@ -240,7 +241,6 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x30013000 0x13000 0 0xffed000>;
dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;

View File

@ -75,8 +75,8 @@
imx27-phycard-s-rdk {
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
MX27_PAD_I2C_DATA__I2C_DATA 0x0
MX27_PAD_I2C_CLK__I2C_CLK 0x0
>;
};

View File

@ -38,7 +38,7 @@
};
&switch_ports {
/delete-node/ port@2;
/delete-node/ port@3;
};
&touchscreen {

View File

@ -72,8 +72,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;

View File

@ -367,6 +367,8 @@
};
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins>;
vmmc-supply = <&wl12xx_vmmc>;
/* uart2_tx.sdmmc3_dat1 pad as wakeirq */
interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
@ -472,6 +474,37 @@
>;
};
/*
* Android uses PIN_OFF_INPUT_PULLDOWN | PIN_INPUT_PULLUP | MUX_MODE3
* for gpio_100, but the internal pull makes wlan flakey on some
* devices. Off mode value should be tested if we have off mode working
* later on.
*/
mmc3_pins: pinmux_mmc3_pins {
pinctrl-single,pins = <
/* 0x4a10008e gpmc_wait2.gpio_100 d23 */
OMAP4_IOPAD(0x08e, PIN_INPUT | MUX_MODE3)
/* 0x4a100102 abe_mcbsp1_dx.sdmmc3_dat2 ab25 */
OMAP4_IOPAD(0x102, PIN_INPUT_PULLUP | MUX_MODE1)
/* 0x4a100104 abe_mcbsp1_fsx.sdmmc3_dat3 ac27 */
OMAP4_IOPAD(0x104, PIN_INPUT_PULLUP | MUX_MODE1)
/* 0x4a100118 uart2_cts.sdmmc3_clk ab26 */
OMAP4_IOPAD(0x118, PIN_INPUT | MUX_MODE1)
/* 0x4a10011a uart2_rts.sdmmc3_cmd ab27 */
OMAP4_IOPAD(0x11a, PIN_INPUT_PULLUP | MUX_MODE1)
/* 0x4a10011c uart2_rx.sdmmc3_dat0 aa25 */
OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE1)
/* 0x4a10011e uart2_tx.sdmmc3_dat1 aa26 */
OMAP4_IOPAD(0x11e, PIN_INPUT_PULLUP | MUX_MODE1)
>;
};
/* gpmc_ncs0.gpio_50 */
poweroff_gpio: pinmux_poweroff_pins {
pinctrl-single,pins = <
@ -690,14 +723,18 @@
};
/*
* As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for
* uart1 wakeirq.
* The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149
* for wake-up events for both the USB PHY and the UART. We can use gpio_149
* pad as the shared wakeirq for the UART rather than the RX or CTS pad as we
* have gpio_149 trigger before the UART transfer starts.
*/
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core 0xfc>;
&omap4_pmx_core 0x110>;
uart-has-rtscts;
current-speed = <115200>;
};
&uart3 {

View File

@ -304,7 +304,6 @@
reg = <0xe803b000 0x30>;
interrupts = <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>;
clocks = <&cpg CPG_MOD 36>;
clock-names = "ostm0";
power-domains = <&cpg>;
status = "disabled";
};
@ -314,7 +313,6 @@
reg = <0xe803c000 0x30>;
interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
clocks = <&cpg CPG_MOD 35>;
clock-names = "ostm1";
power-domains = <&cpg>;
status = "disabled";
};
@ -324,7 +322,6 @@
reg = <0xe803d000 0x30>;
interrupts = <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>;
clocks = <&cpg CPG_MOD 34>;
clock-names = "ostm2";
power-domains = <&cpg>;
status = "disabled";
};

View File

@ -131,7 +131,14 @@
cmt1: timer@e6130000 {
compatible = "renesas,r8a73a4-cmt1", "renesas,rcar-gen2-cmt1";
reg = <0 0xe6130000 0 0x1004>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_CMT1>;
clock-names = "fck";
power-domains = <&pd_c5>;

View File

@ -479,7 +479,7 @@
cpg_clocks: cpg_clocks@e6150000 {
compatible = "renesas,r8a7740-cpg-clocks";
reg = <0xe6150000 0x10000>;
clocks = <&extal1_clk>, <&extalr_clk>;
clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
#clock-cells = <1>;
clock-output-names = "system", "pllc0", "pllc1",
"pllc2", "r",

View File

@ -84,8 +84,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;

View File

@ -364,8 +364,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;

View File

@ -297,8 +297,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;

View File

@ -387,8 +387,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;

View File

@ -181,8 +181,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;

View File

@ -289,8 +289,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;

View File

@ -249,14 +249,12 @@
*/
hdmi@3d {
compatible = "adi,adv7513";
reg = <0x3d>, <0x2d>, <0x4d>, <0x5d>;
reg-names = "main", "cec", "edid", "packet";
reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>;
reg-names = "main", "edid", "cec", "packet";
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
@ -280,14 +278,12 @@
hdmi@39 {
compatible = "adi,adv7513";
reg = <0x39>, <0x29>, <0x49>, <0x59>;
reg-names = "main", "cec", "edid", "packet";
reg = <0x39>, <0x49>, <0x29>, <0x59>;
reg-names = "main", "edid", "cec", "packet";
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;

View File

@ -366,8 +366,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;

View File

@ -255,8 +255,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;

View File

@ -128,7 +128,7 @@
assigned-clocks = <&cru SCLK_GPU>;
assigned-clock-rates = <100000000>;
clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>;
clock-names = "core", "bus";
clock-names = "bus", "core";
resets = <&cru SRST_GPU>;
status = "disabled";
};

View File

@ -46,7 +46,7 @@
#address-cells = <1>;
#size-cells = <0>;
phy: phy@0 {
phy: ethernet-phy@0 {
compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22";
reg = <0>;
clocks = <&cru SCLK_MAC_PHY>;

View File

@ -150,7 +150,7 @@
#address-cells = <1>;
#size-cells = <0>;
phy: phy@0 {
phy: ethernet-phy@0 {
compatible = "ethernet-phy-id1234.d400",
"ethernet-phy-ieee802.3-c22";
reg = <0>;

View File

@ -555,7 +555,7 @@
"pp1",
"ppmmu1";
clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
clock-names = "core", "bus";
clock-names = "bus", "core";
resets = <&cru SRST_GPU_A>;
status = "disabled";
};
@ -1020,7 +1020,7 @@
};
};
spi-0 {
spi0 {
spi0_clk: spi0-clk {
rockchip,pins = <0 RK_PB1 2 &pcfg_pull_up>;
};
@ -1038,7 +1038,7 @@
};
};
spi-1 {
spi1 {
spi1_clk: spi1-clk {
rockchip,pins = <0 RK_PC7 2 &pcfg_pull_up>;
};

View File

@ -84,7 +84,7 @@
compatible = "arm,mali-400";
reg = <0x10090000 0x10000>;
clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
clock-names = "core", "bus";
clock-names = "bus", "core";
assigned-clocks = <&cru ACLK_GPU>;
assigned-clock-rates = <100000000>;
resets = <&cru SRST_GPU>;

View File

@ -147,6 +147,7 @@ CONFIG_I2C_DAVINCI=y
CONFIG_SPI=y
CONFIG_SPI_DAVINCI=y
CONFIG_SPI_SPIDEV=y
CONFIG_PTP_1588_CLOCK=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y

View File

@ -274,6 +274,7 @@ CONFIG_SPI_TI_QSPI=m
CONFIG_HSI=m
CONFIG_OMAP_SSI=m
CONFIG_SSI_PROTOCOL=m
CONFIG_PTP_1588_CLOCK=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y

View File

@ -27,7 +27,8 @@ static void __iomem *gic_cpu_ctrl;
#define GIC_CPU_CTRL 0x00
#define GIC_CPU_CTRL_ENABLE 1
int __init ox820_boot_secondary(unsigned int cpu, struct task_struct *idle)
static int __init ox820_boot_secondary(unsigned int cpu,
struct task_struct *idle)
{
/*
* Write the address of secondary startup into the

View File

@ -20,6 +20,7 @@ config ARM64
select ARCH_HAS_KCOV
select ARCH_HAS_KEEPINITRD
select ARCH_HAS_MEMBARRIER_SYNC_CORE
select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
select ARCH_HAS_PTE_DEVMAP
select ARCH_HAS_PTE_SPECIAL
select ARCH_HAS_SETUP_DMA_OPS

View File

@ -98,7 +98,7 @@
};
&codec_analog {
hpvcc-supply = <&reg_eldo1>;
cpvdd-supply = <&reg_eldo1>;
status = "okay";
};

View File

@ -154,24 +154,6 @@
};
};
sound_spdif {
compatible = "simple-audio-card";
simple-audio-card,name = "On-board SPDIF";
simple-audio-card,cpu {
sound-dai = <&spdif>;
};
simple-audio-card,codec {
sound-dai = <&spdif_out>;
};
};
spdif_out: spdif-out {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
};
timer {
compatible = "arm,armv8-timer";
allwinner,erratum-unknown1;

View File

@ -2319,7 +2319,7 @@
reg = <0x0 0xff400000 0x0 0x40000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
clock-names = "ddr";
clock-names = "otg";
phys = <&usb2_phy1>;
phy-names = "usb2-phy";
dr_mode = "peripheral";

View File

@ -1,4 +1,3 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2019 BayLibre, SAS

View File

@ -154,6 +154,10 @@
clock-latency = <50000>;
};
&frddr_a {
status = "okay";
};
&frddr_b {
status = "okay";
};

View File

@ -545,7 +545,7 @@
&usb {
status = "okay";
dr_mode = "host";
vbus-regulator = <&usb_pwr_en>;
vbus-supply = <&usb_pwr_en>;
};
&usb2_phy0 {

View File

@ -447,7 +447,7 @@
edma0: dma-controller@22c0000 {
#dma-cells = <2>;
compatible = "fsl,ls1028a-edma";
compatible = "fsl,ls1028a-edma", "fsl,vf610-edma";
reg = <0x0 0x22c0000 0x0 0x10000>,
<0x0 0x22d0000 0x0 0x10000>,
<0x0 0x22e0000 0x0 0x10000>;

View File

@ -264,7 +264,7 @@
aips1: bus@30000000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x301f0000 0x10000>;
reg = <0x30000000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30000000 0x30000000 0x400000>;
@ -543,7 +543,7 @@
aips2: bus@30400000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x305f0000 0x10000>;
reg = <0x30400000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30400000 0x30400000 0x400000>;
@ -603,7 +603,7 @@
aips3: bus@30800000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x309f0000 0x10000>;
reg = <0x30800000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30800000 0x30800000 0x400000>,
@ -863,7 +863,7 @@
aips4: bus@32c00000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x32df0000 0x10000>;
reg = <0x32c00000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x32c00000 0x32c00000 0x400000>;

View File

@ -241,7 +241,7 @@
aips1: bus@30000000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x301f0000 0x10000>;
reg = <0x30000000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@ -448,7 +448,7 @@
aips2: bus@30400000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x305f0000 0x10000>;
reg = <0x30400000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@ -508,7 +508,7 @@
aips3: bus@30800000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x309f0000 0x10000>;
reg = <0x30800000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@ -718,7 +718,7 @@
reg = <0x30bd0000 0x10000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>,
<&clk IMX8MN_CLK_SDMA1_ROOT>;
<&clk IMX8MN_CLK_AHB>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
@ -754,7 +754,7 @@
aips4: bus@32c00000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x32df0000 0x10000>;
reg = <0x32c00000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;

View File

@ -151,26 +151,26 @@
#define MX8MP_IOMUXC_ENET_TXC__SIM_M_HADDR22 0x070 0x2D0 0x000 0x7 0x0
#define MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x074 0x2D4 0x000 0x0 0x0
#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_SAI7_TX_SYNC 0x074 0x2D4 0x540 0x2 0x0
#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_BIT_STREAM03 0x074 0x2D4 0x4CC 0x3 0x0
#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_BIT_STREAM03 0x074 0x2D4 0x4CC 0x3 0x1
#define MX8MP_IOMUXC_ENET_RX_CTL__GPIO1_IO24 0x074 0x2D4 0x000 0x5 0x0
#define MX8MP_IOMUXC_ENET_RX_CTL__USDHC3_DATA2 0x074 0x2D4 0x618 0x6 0x0
#define MX8MP_IOMUXC_ENET_RX_CTL__SIM_M_HADDR23 0x074 0x2D4 0x000 0x7 0x0
#define MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x078 0x2D8 0x000 0x0 0x0
#define MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER 0x078 0x2D8 0x000 0x1 0x0
#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_SAI7_TX_BCLK 0x078 0x2D8 0x53C 0x2 0x0
#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_BIT_STREAM02 0x078 0x2D8 0x4C8 0x3 0x0
#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_BIT_STREAM02 0x078 0x2D8 0x4C8 0x3 0x1
#define MX8MP_IOMUXC_ENET_RXC__GPIO1_IO25 0x078 0x2D8 0x000 0x5 0x0
#define MX8MP_IOMUXC_ENET_RXC__USDHC3_DATA3 0x078 0x2D8 0x61C 0x6 0x0
#define MX8MP_IOMUXC_ENET_RXC__SIM_M_HADDR24 0x078 0x2D8 0x000 0x7 0x0
#define MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x07C 0x2DC 0x000 0x0 0x0
#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_SAI7_RX_DATA00 0x07C 0x2DC 0x534 0x2 0x0
#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_BIT_STREAM01 0x07C 0x2DC 0x4C4 0x3 0x0
#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_BIT_STREAM01 0x07C 0x2DC 0x4C4 0x3 0x1
#define MX8MP_IOMUXC_ENET_RD0__GPIO1_IO26 0x07C 0x2DC 0x000 0x5 0x0
#define MX8MP_IOMUXC_ENET_RD0__USDHC3_DATA4 0x07C 0x2DC 0x620 0x6 0x0
#define MX8MP_IOMUXC_ENET_RD0__SIM_M_HADDR25 0x07C 0x2DC 0x000 0x7 0x0
#define MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x080 0x2E0 0x000 0x0 0x0
#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_SAI7_RX_SYNC 0x080 0x2E0 0x538 0x2 0x0
#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_BIT_STREAM00 0x080 0x2E0 0x4C0 0x3 0x0
#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_BIT_STREAM00 0x080 0x2E0 0x4C0 0x3 0x1
#define MX8MP_IOMUXC_ENET_RD1__GPIO1_IO27 0x080 0x2E0 0x000 0x5 0x0
#define MX8MP_IOMUXC_ENET_RD1__USDHC3_RESET_B 0x080 0x2E0 0x000 0x6 0x0
#define MX8MP_IOMUXC_ENET_RD1__SIM_M_HADDR26 0x080 0x2E0 0x000 0x7 0x0
@ -291,7 +291,7 @@
#define MX8MP_IOMUXC_SD2_DATA0__I2C4_SDA 0x0C8 0x328 0x5C0 0x2 0x1
#define MX8MP_IOMUXC_SD2_DATA0__UART2_DCE_RX 0x0C8 0x328 0x5F0 0x3 0x2
#define MX8MP_IOMUXC_SD2_DATA0__UART2_DTE_TX 0x0C8 0x328 0x000 0x3 0x0
#define MX8MP_IOMUXC_SD2_DATA0__AUDIOMIX_BIT_STREAM00 0x0C8 0x328 0x4C0 0x4 0x1
#define MX8MP_IOMUXC_SD2_DATA0__AUDIOMIX_BIT_STREAM00 0x0C8 0x328 0x4C0 0x4 0x2
#define MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15 0x0C8 0x328 0x000 0x5 0x0
#define MX8MP_IOMUXC_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2 0x0C8 0x328 0x000 0x6 0x0
#define MX8MP_IOMUXC_SD2_DATA0__OBSERVE_MUX_OUT02 0x0C8 0x328 0x000 0x7 0x0
@ -313,7 +313,7 @@
#define MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x0D4 0x334 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD2_DATA3__ECSPI2_MISO 0x0D4 0x334 0x56C 0x2 0x0
#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_SPDIF_IN 0x0D4 0x334 0x544 0x3 0x1
#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_BIT_STREAM03 0x0D4 0x334 0x4CC 0x4 0x1
#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_BIT_STREAM03 0x0D4 0x334 0x4CC 0x4 0x2
#define MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x0D4 0x334 0x000 0x5 0x0
#define MX8MP_IOMUXC_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET 0x0D4 0x334 0x000 0x6 0x0
#define MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B 0x0D8 0x338 0x000 0x0 0x0
@ -487,27 +487,27 @@
#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI1_TX_DATA02 0x134 0x394 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT 0x134 0x394 0x000 0x2 0x0
#define MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL 0x134 0x394 0x5C4 0x3 0x1
#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_BIT_STREAM00 0x134 0x394 0x4C0 0x4 0x2
#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_BIT_STREAM00 0x134 0x394 0x4C0 0x4 0x3
#define MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x134 0x394 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_RX_DATA01 0x138 0x398 0x4FC 0x0 0x0
#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_DATA03 0x138 0x398 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC 0x138 0x398 0x4D8 0x2 0x0
#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC 0x138 0x398 0x510 0x3 0x0
#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_BIT_STREAM01 0x138 0x398 0x4C4 0x4 0x2
#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_BIT_STREAM01 0x138 0x398 0x4C4 0x4 0x3
#define MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22 0x138 0x398 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x138 0x398 0x000 0x6 0x0
#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_RX_DATA02 0x13C 0x39C 0x500 0x0 0x0
#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_DATA04 0x13C 0x39C 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_SYNC 0x13C 0x39C 0x4D8 0x2 0x1
#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK 0x13C 0x39C 0x50C 0x3 0x0
#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_BIT_STREAM02 0x13C 0x39C 0x4C8 0x4 0x2
#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_BIT_STREAM02 0x13C 0x39C 0x4C8 0x4 0x3
#define MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x13C 0x39C 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x13C 0x39C 0x54C 0x6 0x0
#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_RX_DATA03 0x140 0x3A0 0x504 0x0 0x0
#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_DATA05 0x140 0x3A0 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_SYNC 0x140 0x3A0 0x4D8 0x2 0x2
#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00 0x140 0x3A0 0x000 0x3 0x0
#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_BIT_STREAM03 0x140 0x3A0 0x4CC 0x4 0x2
#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_BIT_STREAM03 0x140 0x3A0 0x4CC 0x4 0x3
#define MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x140 0x3A0 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x140 0x3A0 0x000 0x6 0x0
#define MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI5_MCLK 0x144 0x3A4 0x4F0 0x0 0x0
@ -528,22 +528,22 @@
#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00 0x150 0x3B0 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI5_RX_DATA00 0x150 0x3B0 0x4F8 0x1 0x1
#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_TX_DATA01 0x150 0x3B0 0x000 0x2 0x0
#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_BIT_STREAM00 0x150 0x3B0 0x4C0 0x3 0x3
#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_BIT_STREAM00 0x150 0x3B0 0x4C0 0x3 0x4
#define MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN 0x150 0x3B0 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x150 0x3B0 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI1_RX_DATA01 0x154 0x3B4 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI5_RX_DATA01 0x154 0x3B4 0x4FC 0x1 0x1
#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_BIT_STREAM01 0x154 0x3B4 0x4C4 0x3 0x3
#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_BIT_STREAM01 0x154 0x3B4 0x4C4 0x3 0x4
#define MX8MP_IOMUXC_SAI1_RXD1__ENET1_1588_EVENT1_OUT 0x154 0x3B4 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x154 0x3B4 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI1_RX_DATA02 0x158 0x3B8 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI5_RX_DATA02 0x158 0x3B8 0x500 0x1 0x1
#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_BIT_STREAM02 0x158 0x3B8 0x4C8 0x3 0x3
#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_BIT_STREAM02 0x158 0x3B8 0x4C8 0x3 0x4
#define MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x158 0x3B8 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04 0x158 0x3B8 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI1_RX_DATA03 0x15C 0x3BC 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI5_RX_DATA03 0x15C 0x3BC 0x504 0x1 0x1
#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_BIT_STREAM03 0x15C 0x3BC 0x4CC 0x3 0x3
#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_BIT_STREAM03 0x15C 0x3BC 0x4CC 0x3 0x4
#define MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x15C 0x3BC 0x57C 0x4 0x1
#define MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05 0x15C 0x3BC 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI1_RX_DATA04 0x160 0x3C0 0x000 0x0 0x0
@ -624,7 +624,7 @@
#define MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX 0x19C 0x3FC 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI2_RXFS__UART1_DTE_RX 0x19C 0x3FC 0x5E8 0x4 0x2
#define MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x19C 0x3FC 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_BIT_STREAM02 0x19C 0x3FC 0x4C8 0x6 0x4
#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_BIT_STREAM02 0x19C 0x3FC 0x4C8 0x6 0x5
#define MX8MP_IOMUXC_SAI2_RXFS__SIM_M_HSIZE00 0x19C 0x3FC 0x000 0x7 0x0
#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI2_RX_BCLK 0x1A0 0x400 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI5_TX_BCLK 0x1A0 0x400 0x50C 0x1 0x2
@ -632,7 +632,7 @@
#define MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX 0x1A0 0x400 0x5E8 0x4 0x3
#define MX8MP_IOMUXC_SAI2_RXC__UART1_DTE_TX 0x1A0 0x400 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x1A0 0x400 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_BIT_STREAM01 0x1A0 0x400 0x4C4 0x6 0x4
#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_BIT_STREAM01 0x1A0 0x400 0x4C4 0x6 0x5
#define MX8MP_IOMUXC_SAI2_RXC__SIM_M_HSIZE01 0x1A0 0x400 0x000 0x7 0x0
#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0x1A4 0x404 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI5_TX_DATA00 0x1A4 0x404 0x000 0x1 0x0
@ -641,7 +641,7 @@
#define MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS 0x1A4 0x404 0x5E4 0x4 0x2
#define MX8MP_IOMUXC_SAI2_RXD0__UART1_DTE_CTS 0x1A4 0x404 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23 0x1A4 0x404 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_BIT_STREAM03 0x1A4 0x404 0x4CC 0x6 0x4
#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_BIT_STREAM03 0x1A4 0x404 0x4CC 0x6 0x5
#define MX8MP_IOMUXC_SAI2_RXD0__SIM_M_HSIZE02 0x1A4 0x404 0x000 0x7 0x0
#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0x1A8 0x408 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI5_TX_DATA01 0x1A8 0x408 0x000 0x1 0x0
@ -650,13 +650,13 @@
#define MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS 0x1A8 0x408 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI2_TXFS__UART1_DTE_RTS 0x1A8 0x408 0x5E4 0x4 0x3
#define MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x1A8 0x408 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_BIT_STREAM02 0x1A8 0x408 0x4C8 0x6 0x5
#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_BIT_STREAM02 0x1A8 0x408 0x4C8 0x6 0x6
#define MX8MP_IOMUXC_SAI2_TXFS__SIM_M_HWRITE 0x1A8 0x408 0x000 0x7 0x0
#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0x1AC 0x40C 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI5_TX_DATA02 0x1AC 0x40C 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI2_TXC__CAN1_RX 0x1AC 0x40C 0x54C 0x3 0x1
#define MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x1AC 0x40C 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_BIT_STREAM01 0x1AC 0x40C 0x4C4 0x6 0x5
#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_BIT_STREAM01 0x1AC 0x40C 0x4C4 0x6 0x6
#define MX8MP_IOMUXC_SAI2_TXC__SIM_M_HREADYOUT 0x1AC 0x40C 0x000 0x7 0x0
#define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0x1B0 0x410 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI5_TX_DATA03 0x1B0 0x410 0x000 0x1 0x0
@ -680,7 +680,7 @@
#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_DATA01 0x1B8 0x418 0x000 0x3 0x0
#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SPDIF_IN 0x1B8 0x418 0x544 0x4 0x2
#define MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x1B8 0x418 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_BIT_STREAM00 0x1B8 0x418 0x4C0 0x6 0x4
#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_BIT_STREAM00 0x1B8 0x418 0x4C0 0x6 0x5
#define MX8MP_IOMUXC_SAI3_RXFS__TPSMP_HTRANS00 0x1B8 0x418 0x000 0x7 0x0
#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI3_RX_BCLK 0x1BC 0x41C 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI2_RX_DATA02 0x1BC 0x41C 0x000 0x1 0x0
@ -697,7 +697,7 @@
#define MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS 0x1C0 0x420 0x5EC 0x4 0x3
#define MX8MP_IOMUXC_SAI3_RXD__UART2_DTE_CTS 0x1C0 0x420 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x1C0 0x420 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_BIT_STREAM01 0x1C0 0x420 0x4C4 0x6 0x6
#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_BIT_STREAM01 0x1C0 0x420 0x4C4 0x6 0x7
#define MX8MP_IOMUXC_SAI3_RXD__TPSMP_HDATA00 0x1C0 0x420 0x000 0x7 0x0
#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0x1C4 0x424 0x4EC 0x0 0x1
#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI2_TX_DATA01 0x1C4 0x424 0x000 0x1 0x0
@ -706,7 +706,7 @@
#define MX8MP_IOMUXC_SAI3_TXFS__UART2_DCE_RX 0x1C4 0x424 0x5F0 0x4 0x4
#define MX8MP_IOMUXC_SAI3_TXFS__UART2_DTE_TX 0x1C4 0x424 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x1C4 0x424 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_BIT_STREAM03 0x1C4 0x424 0x4CC 0x6 0x5
#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_BIT_STREAM03 0x1C4 0x424 0x4CC 0x6 0x6
#define MX8MP_IOMUXC_SAI3_TXFS__TPSMP_HDATA01 0x1C4 0x424 0x000 0x7 0x0
#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0x1C8 0x428 0x4E8 0x0 0x1
#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI2_TX_DATA02 0x1C8 0x428 0x000 0x1 0x0
@ -715,7 +715,7 @@
#define MX8MP_IOMUXC_SAI3_TXC__UART2_DCE_TX 0x1C8 0x428 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI3_TXC__UART2_DTE_RX 0x1C8 0x428 0x5F0 0x4 0x5
#define MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x1C8 0x428 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_BIT_STREAM02 0x1C8 0x428 0x4C8 0x6 0x6
#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_BIT_STREAM02 0x1C8 0x428 0x4C8 0x6 0x7
#define MX8MP_IOMUXC_SAI3_TXC__TPSMP_HDATA02 0x1C8 0x428 0x000 0x7 0x0
#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0x1CC 0x42C 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI2_TX_DATA03 0x1CC 0x42C 0x000 0x1 0x0

View File

@ -145,7 +145,7 @@
aips1: bus@30000000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x301f0000 0x10000>;
reg = <0x30000000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@ -318,7 +318,7 @@
aips2: bus@30400000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x305f0000 0x400000>;
reg = <0x30400000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@ -378,7 +378,7 @@
aips3: bus@30800000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x309f0000 0x400000>;
reg = <0x30800000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;

View File

@ -291,7 +291,7 @@
bus@30000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x301f0000 0x10000>;
reg = <0x30000000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30000000 0x30000000 0x400000>;
@ -696,7 +696,7 @@
bus@30400000 { /* AIPS2 */
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x305f0000 0x10000>;
reg = <0x30400000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30400000 0x30400000 0x400000>;
@ -756,7 +756,7 @@
bus@30800000 { /* AIPS3 */
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x309f0000 0x10000>;
reg = <0x30800000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30800000 0x30800000 0x400000>,
@ -1029,7 +1029,7 @@
bus@32c00000 { /* AIPS4 */
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x32df0000 0x10000>;
reg = <0x32c00000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x32c00000 0x32c00000 0x400000>;

View File

@ -658,8 +658,8 @@
s11 {
qcom,saw-leader;
regulator-always-on;
regulator-min-microvolt = <1230000>;
regulator-max-microvolt = <1230000>;
regulator-min-microvolt = <980000>;
regulator-max-microvolt = <980000>;
};
};
@ -908,10 +908,27 @@
status = "okay";
};
&q6asmdai {
dai@0 {
reg = <0>;
};
dai@1 {
reg = <1>;
};
dai@2 {
reg = <2>;
};
};
&sound {
compatible = "qcom,apq8096-sndcard";
model = "DB820c";
audio-routing = "RX_BIAS", "MCLK";
audio-routing = "RX_BIAS", "MCLK",
"MM_DL1", "MultiMedia1 Playback",
"MM_DL2", "MultiMedia2 Playback",
"MultiMedia3 Capture", "MM_UL3";
mm1-dai-link {
link-name = "MultiMedia1";

View File

@ -2066,6 +2066,8 @@
reg = <APR_SVC_ASM>;
q6asmdai: dais {
compatible = "qcom,q6asm-dais";
#address-cells = <1>;
#size-cells = <0>;
#sound-dai-cells = <1>;
iommus = <&lpass_q6_smmu 1>;
};

View File

@ -442,17 +442,14 @@
&q6asmdai {
dai@0 {
reg = <0>;
direction = <2>;
};
dai@1 {
reg = <1>;
direction = <2>;
};
dai@2 {
reg = <2>;
direction = <1>;
};
dai@3 {

View File

@ -359,12 +359,10 @@
&q6asmdai {
dai@0 {
reg = <0>;
direction = <2>;
};
dai@1 {
reg = <1>;
direction = <1>;
};
};

View File

@ -137,8 +137,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;

View File

@ -150,8 +150,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;

View File

@ -174,8 +174,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;

View File

@ -141,8 +141,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;

View File

@ -1318,6 +1318,7 @@
ipmmu_vip0: mmu@e7b00000 {
compatible = "renesas,ipmmu-r8a77980";
reg = <0 0xe7b00000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 4>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
@ -1325,6 +1326,7 @@
ipmmu_vip1: mmu@e7960000 {
compatible = "renesas,ipmmu-r8a77980";
reg = <0 0xe7960000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 11>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};

View File

@ -360,8 +360,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;

View File

@ -272,8 +272,8 @@
hdmi-encoder@39 {
compatible = "adi,adv7511w";
reg = <0x39>, <0x3f>, <0x38>, <0x3c>;
reg-names = "main", "edid", "packet", "cec";
reg = <0x39>, <0x3f>, <0x3c>, <0x38>;
reg-names = "main", "edid", "cec", "packet";
interrupt-parent = <&gpio1>;
interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
@ -284,8 +284,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;

View File

@ -143,7 +143,7 @@
};
arm-pmu {
compatible = "arm,cortex-a53-pmu";
compatible = "arm,cortex-a35-pmu";
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,

View File

@ -127,7 +127,7 @@
};
arm-pmu {
compatible = "arm,cortex-a53-pmu";
compatible = "arm,cortex-a35-pmu";
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,

View File

@ -82,17 +82,16 @@
&gmac2phy {
phy-supply = <&vcc_phy>;
clock_in_out = "output";
assigned-clocks = <&cru SCLK_MAC2PHY_SRC>;
assigned-clock-rate = <50000000>;
assigned-clocks = <&cru SCLK_MAC2PHY>;
assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
status = "okay";
};
&i2c1 {
status = "okay";
rk805: rk805@18 {
rk805: pmic@18 {
compatible = "rockchip,rk805";
reg = <0x18>;
interrupt-parent = <&gpio2>;

View File

@ -170,7 +170,7 @@
&i2c1 {
status = "okay";
rk805: rk805@18 {
rk805: pmic@18 {
compatible = "rockchip,rk805";
reg = <0x18>;
interrupt-parent = <&gpio2>;

View File

@ -299,8 +299,6 @@
grf: syscon@ff100000 {
compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd";
reg = <0x0 0xff100000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
io_domains: io-domains {
compatible = "rockchip,rk3328-io-voltage-domain";
@ -1794,10 +1792,6 @@
};
gmac2phy {
fephyled_speed100: fephyled-speed100 {
rockchip,pins = <0 RK_PD7 1 &pcfg_pull_none>;
};
fephyled_speed10: fephyled-speed10 {
rockchip,pins = <0 RK_PD6 1 &pcfg_pull_none>;
};
@ -1806,18 +1800,6 @@
rockchip,pins = <0 RK_PD6 2 &pcfg_pull_none>;
};
fephyled_rxm0: fephyled-rxm0 {
rockchip,pins = <0 RK_PD5 1 &pcfg_pull_none>;
};
fephyled_txm0: fephyled-txm0 {
rockchip,pins = <0 RK_PD5 2 &pcfg_pull_none>;
};
fephyled_linkm0: fephyled-linkm0 {
rockchip,pins = <0 RK_PD4 1 &pcfg_pull_none>;
};
fephyled_rxm1: fephyled-rxm1 {
rockchip,pins = <2 RK_PD1 2 &pcfg_pull_none>;
};

View File

@ -147,7 +147,7 @@
"Speaker", "Speaker Amplifier OUTL",
"Speaker", "Speaker Amplifier OUTR";
simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
simple-audio-card,aux-devs = <&speaker_amp>;
simple-audio-card,pin-switches = "Speaker";
@ -690,7 +690,8 @@
fusb0: fusb30x@22 {
compatible = "fcs,fusb302";
reg = <0x22>;
fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
interrupt-parent = <&gpio1>;
interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&fusb0_int_gpio>;
vbus-supply = <&vbus_typec>;
@ -788,13 +789,13 @@
dc-charger {
dc_det_gpio: dc-det-gpio {
rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
es8316 {
hp_det_gpio: hp-det-gpio {
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};

View File

@ -403,7 +403,7 @@
reset-names = "usb3-otg";
status = "disabled";
usbdrd_dwc3_0: dwc3 {
usbdrd_dwc3_0: usb@fe800000 {
compatible = "snps,dwc3";
reg = <0x0 0xfe800000 0x0 0x100000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
@ -439,7 +439,7 @@
reset-names = "usb3-otg";
status = "disabled";
usbdrd_dwc3_1: dwc3 {
usbdrd_dwc3_1: usb@fe900000 {
compatible = "snps,dwc3";
reg = <0x0 0xfe900000 0x0 0x100000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
@ -1124,8 +1124,6 @@
pmugrf: syscon@ff320000 {
compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
reg = <0x0 0xff320000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
pmu_io_domains: io-domains {
compatible = "rockchip,rk3399-pmu-io-voltage-domain";
@ -1883,10 +1881,10 @@
gpu: gpu@ff9a0000 {
compatible = "rockchip,rk3399-mali", "arm,mali-t860";
reg = <0x0 0xff9a0000 0x0 0x10000>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "gpu", "job", "mmu";
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "job", "mmu", "gpu";
clocks = <&cru ACLK_GPU>;
#cooling-cells = <2>;
power-domains = <&power RK3399_PD_GPU>;

View File

@ -208,7 +208,7 @@ CONFIG_PCIE_QCOM=y
CONFIG_PCIE_ARMADA_8K=y
CONFIG_PCIE_KIRIN=y
CONFIG_PCIE_HISI_STB=y
CONFIG_PCIE_TEGRA194=m
CONFIG_PCIE_TEGRA194_HOST=m
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_FW_LOADER_USER_HELPER=y
@ -567,6 +567,7 @@ CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
# CONFIG_DVB_NET is not set
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
@ -610,8 +611,9 @@ CONFIG_DRM_MSM=m
CONFIG_DRM_TEGRA=m
CONFIG_DRM_PANEL_LVDS=m
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_DUMB_VGA_DAC=m
CONFIG_DRM_SIMPLE_BRIDGE=m
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m
CONFIG_DRM_DISPLAY_CONNECTOR=m
CONFIG_DRM_SII902X=m
CONFIG_DRM_THINE_THC63LVD1024=m
CONFIG_DRM_TI_SN65DSI86=m
@ -848,7 +850,8 @@ CONFIG_QCOM_APR=m
CONFIG_ARCH_R8A774A1=y
CONFIG_ARCH_R8A774B1=y
CONFIG_ARCH_R8A774C0=y
CONFIG_ARCH_R8A7795=y
CONFIG_ARCH_R8A77950=y
CONFIG_ARCH_R8A77951=y
CONFIG_ARCH_R8A77960=y
CONFIG_ARCH_R8A77961=y
CONFIG_ARCH_R8A77965=y

View File

@ -304,7 +304,7 @@ do { \
__p = uaccess_mask_ptr(__p); \
__raw_get_user((x), __p, (err)); \
} else { \
(x) = 0; (err) = -EFAULT; \
(x) = (__force __typeof__(x))0; (err) = -EFAULT; \
} \
} while (0)

View File

@ -177,6 +177,7 @@ void machine_kexec(struct kimage *kimage)
* the offline CPUs. Therefore, we must use the __* variant here.
*/
__flush_icache_range((uintptr_t)reboot_code_buffer,
(uintptr_t)reboot_code_buffer +
arm64_relocate_new_kernel_size);
/* Flush the kimage list and its buffers. */

View File

@ -1829,10 +1829,11 @@ static void tracehook_report_syscall(struct pt_regs *regs,
int syscall_trace_enter(struct pt_regs *regs)
{
if (test_thread_flag(TIF_SYSCALL_TRACE) ||
test_thread_flag(TIF_SYSCALL_EMU)) {
unsigned long flags = READ_ONCE(current_thread_info()->flags);
if (flags & (_TIF_SYSCALL_EMU | _TIF_SYSCALL_TRACE)) {
tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER);
if (!in_syscall(regs) || test_thread_flag(TIF_SYSCALL_EMU))
if (!in_syscall(regs) || (flags & _TIF_SYSCALL_EMU))
return -1;
}

View File

@ -8,6 +8,7 @@ config CSKY
select ARCH_HAS_SYNC_DMA_FOR_DEVICE
select ARCH_USE_BUILTIN_BSWAP
select ARCH_USE_QUEUED_RWLOCKS if NR_CPUS>2
select ARCH_WANT_FRAME_POINTERS if !CPU_CK610
select COMMON_CLK
select CLKSRC_MMIO
select CSKY_MPINTC if CPU_CK860
@ -38,6 +39,7 @@ config CSKY
select HAVE_ARCH_TRACEHOOK
select HAVE_ARCH_AUDITSYSCALL
select HAVE_COPY_THREAD_TLS
select HAVE_DEBUG_BUGVERBOSE
select HAVE_DYNAMIC_FTRACE
select HAVE_DYNAMIC_FTRACE_WITH_REGS
select HAVE_FUNCTION_TRACER

View File

@ -47,7 +47,7 @@ ifeq ($(CSKYABI),abiv2)
KBUILD_CFLAGS += -mno-stack-size
endif
ifdef CONFIG_STACKTRACE
ifdef CONFIG_FRAME_POINTER
KBUILD_CFLAGS += -mbacktrace
endif

View File

@ -167,8 +167,8 @@
* BA Reserved C D V
*/
cprcr r6, cpcr30
lsri r6, 28
lsli r6, 28
lsri r6, 29
lsli r6, 29
addi r6, 0xe
cpwcr r6, cpcr30

View File

@ -285,8 +285,8 @@
*/
mfcr r6, cr<30, 15> /* Get MSA0 */
2:
lsri r6, 28
lsli r6, 28
lsri r6, 29
lsli r6, 29
addi r6, 0x1ce
mtcr r6, cr<30, 15> /* Set MSA0 */

View File

@ -103,6 +103,8 @@ ENTRY(_mcount)
mov a0, lr
subi a0, 4
ldw a1, (sp, 24)
lrw a2, function_trace_op
ldw a2, (a2, 0)
jsr r26

View File

@ -41,8 +41,7 @@ extern struct cpuinfo_csky cpu_data[];
#define TASK_UNMAPPED_BASE (TASK_SIZE / 3)
struct thread_struct {
unsigned long ksp; /* kernel stack pointer */
unsigned long sr; /* saved status register */
unsigned long sp; /* kernel stack pointer */
unsigned long trap_no; /* saved status register */
/* FPU regs */
@ -50,8 +49,7 @@ struct thread_struct {
};
#define INIT_THREAD { \
.ksp = sizeof(init_stack) + (unsigned long) &init_stack, \
.sr = DEFAULT_PSR_VALUE, \
.sp = sizeof(init_stack) + (unsigned long) &init_stack, \
}
/*

View File

@ -58,6 +58,16 @@ static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
return regs->usp;
}
static inline unsigned long frame_pointer(struct pt_regs *regs)
{
return regs->regs[4];
}
static inline void frame_pointer_set(struct pt_regs *regs,
unsigned long val)
{
regs->regs[4] = val;
}
extern int regs_query_register_offset(const char *name);
extern unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
unsigned int n);

View File

@ -38,7 +38,13 @@ struct thread_info {
#define THREAD_SIZE_ORDER (THREAD_SHIFT - PAGE_SHIFT)
#define thread_saved_fp(tsk) \
((unsigned long)(((struct switch_stack *)(tsk->thread.ksp))->r8))
((unsigned long)(((struct switch_stack *)(tsk->thread.sp))->r8))
#define thread_saved_sp(tsk) \
((unsigned long)(tsk->thread.sp))
#define thread_saved_lr(tsk) \
((unsigned long)(((struct switch_stack *)(tsk->thread.sp))->r15))
static inline struct thread_info *current_thread_info(void)
{
@ -54,10 +60,10 @@ static inline struct thread_info *current_thread_info(void)
#define TIF_SIGPENDING 0 /* signal pending */
#define TIF_NOTIFY_RESUME 1 /* callback before returning to user */
#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
#define TIF_SYSCALL_TRACE 3 /* syscall trace active */
#define TIF_SYSCALL_TRACEPOINT 4 /* syscall tracepoint instrumentation */
#define TIF_SYSCALL_AUDIT 5 /* syscall auditing */
#define TIF_UPROBE 6 /* uprobe breakpoint or singlestep */
#define TIF_UPROBE 3 /* uprobe breakpoint or singlestep */
#define TIF_SYSCALL_TRACE 4 /* syscall trace active */
#define TIF_SYSCALL_TRACEPOINT 5 /* syscall tracepoint instrumentation */
#define TIF_SYSCALL_AUDIT 6 /* syscall auditing */
#define TIF_POLLING_NRFLAG 16 /* poll_idle() is TIF_NEED_RESCHED */
#define TIF_MEMDIE 18 /* is terminating due to OOM killer */
#define TIF_RESTORE_SIGMASK 20 /* restore signal mask in do_signal() */

View File

@ -253,7 +253,7 @@ do { \
extern int __get_user_bad(void);
#define __copy_user(to, from, n) \
#define ___copy_to_user(to, from, n) \
do { \
int w0, w1, w2, w3; \
asm volatile( \
@ -288,31 +288,34 @@ do { \
" subi %0, 4 \n" \
" br 3b \n" \
"5: cmpnei %0, 0 \n" /* 1B */ \
" bf 8f \n" \
" bf 13f \n" \
" ldb %3, (%2, 0) \n" \
"6: stb %3, (%1, 0) \n" \
" addi %2, 1 \n" \
" addi %1, 1 \n" \
" subi %0, 1 \n" \
" br 5b \n" \
"7: br 8f \n" \
"7: subi %0, 4 \n" \
"8: subi %0, 4 \n" \
"12: subi %0, 4 \n" \
" br 13f \n" \
".section __ex_table, \"a\" \n" \
".align 2 \n" \
".long 2b, 7b \n" \
".long 9b, 7b \n" \
".long 10b, 7b \n" \
".long 2b, 13f \n" \
".long 4b, 13f \n" \
".long 6b, 13f \n" \
".long 9b, 12b \n" \
".long 10b, 8b \n" \
".long 11b, 7b \n" \
".long 4b, 7b \n" \
".long 6b, 7b \n" \
".previous \n" \
"8: \n" \
"13: \n" \
: "=r"(n), "=r"(to), "=r"(from), "=r"(w0), \
"=r"(w1), "=r"(w2), "=r"(w3) \
: "0"(n), "1"(to), "2"(from) \
: "memory"); \
} while (0)
#define __copy_user_zeroing(to, from, n) \
#define ___copy_from_user(to, from, n) \
do { \
int tmp; \
int nsave; \
@ -355,22 +358,22 @@ do { \
" addi %1, 1 \n" \
" subi %0, 1 \n" \
" br 5b \n" \
"8: mov %3, %0 \n" \
" movi %4, 0 \n" \
"9: stb %4, (%1, 0) \n" \
" addi %1, 1 \n" \
" subi %3, 1 \n" \
" cmpnei %3, 0 \n" \
" bt 9b \n" \
" br 7f \n" \
"8: stw %3, (%1, 0) \n" \
" subi %0, 4 \n" \
" bf 7f \n" \
"9: subi %0, 8 \n" \
" bf 7f \n" \
"13: stw %3, (%1, 8) \n" \
" subi %0, 12 \n" \
" bf 7f \n" \
".section __ex_table, \"a\" \n" \
".align 2 \n" \
".long 2b, 8b \n" \
".long 2b, 7f \n" \
".long 4b, 7f \n" \
".long 6b, 7f \n" \
".long 10b, 8b \n" \
".long 11b, 8b \n" \
".long 12b, 8b \n" \
".long 4b, 8b \n" \
".long 6b, 8b \n" \
".long 11b, 9b \n" \
".long 12b,13b \n" \
".previous \n" \
"7: \n" \
: "=r"(n), "=r"(to), "=r"(from), "=r"(nsave), \

View File

@ -3,7 +3,7 @@ extra-y := head.o vmlinux.lds
obj-y += entry.o atomic.o signal.o traps.o irq.o time.o vdso.o
obj-y += power.o syscall.o syscall_table.o setup.o
obj-y += process.o cpu-probe.o ptrace.o dumpstack.o
obj-y += process.o cpu-probe.o ptrace.o stacktrace.o
obj-y += probes/
obj-$(CONFIG_MODULES) += module.o

View File

@ -18,8 +18,7 @@ int main(void)
DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
/* offsets into the thread struct */
DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
DEFINE(THREAD_SR, offsetof(struct thread_struct, sr));
DEFINE(THREAD_KSP, offsetof(struct thread_struct, sp));
DEFINE(THREAD_FESR, offsetof(struct thread_struct, user_fp.fesr));
DEFINE(THREAD_FCR, offsetof(struct thread_struct, user_fp.fcr));
DEFINE(THREAD_FPREG, offsetof(struct thread_struct, user_fp.vr));

View File

@ -1,49 +0,0 @@
// SPDX-License-Identifier: GPL-2.0
// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
#include <linux/ptrace.h>
int kstack_depth_to_print = 48;
void show_trace(unsigned long *stack)
{
unsigned long *stack_end;
unsigned long *stack_start;
unsigned long *fp;
unsigned long addr;
addr = (unsigned long) stack & THREAD_MASK;
stack_start = (unsigned long *) addr;
stack_end = (unsigned long *) (addr + THREAD_SIZE);
fp = stack;
pr_info("\nCall Trace:");
while (fp > stack_start && fp < stack_end) {
#ifdef CONFIG_STACKTRACE
addr = fp[1];
fp = (unsigned long *) fp[0];
#else
addr = *fp++;
#endif
if (__kernel_text_address(addr))
pr_cont("\n[<%08lx>] %pS", addr, (void *)addr);
}
pr_cont("\n");
}
void show_stack(struct task_struct *task, unsigned long *stack)
{
if (!stack) {
if (task)
stack = (unsigned long *)thread_saved_fp(task);
else
#ifdef CONFIG_STACKTRACE
asm volatile("mov %0, r8\n":"=r"(stack)::"memory");
#else
stack = (unsigned long *)&stack;
#endif
}
show_trace(stack);
}

View File

@ -330,11 +330,6 @@ ENTRY(__switch_to)
lrw a3, TASK_THREAD
addu a3, a0
mfcr a2, psr /* Save PSR value */
stw a2, (a3, THREAD_SR) /* Save PSR in task struct */
bclri a2, 6 /* Disable interrupts */
mtcr a2, psr
SAVE_SWITCH_STACK
stw sp, (a3, THREAD_KSP)
@ -345,12 +340,9 @@ ENTRY(__switch_to)
ldw sp, (a3, THREAD_KSP) /* Set next kernel sp */
ldw a2, (a3, THREAD_SR) /* Set next PSR */
mtcr a2, psr
#if defined(__CSKYABIV2__)
addi r7, a1, TASK_THREAD_INFO
ldw tls, (r7, TINFO_TP_VALUE)
addi a3, a1, TASK_THREAD_INFO
ldw tls, (a3, TINFO_TP_VALUE)
#endif
RESTORE_SWITCH_STACK

View File

@ -202,6 +202,7 @@ int ftrace_disable_ftrace_graph_caller(void)
#endif /* CONFIG_DYNAMIC_FTRACE */
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
#ifdef CONFIG_DYNAMIC_FTRACE
#ifndef CONFIG_CPU_HAS_ICACHE_INS
struct ftrace_modify_param {
int command;
@ -231,6 +232,7 @@ void arch_ftrace_update_code(int command)
stop_machine(__ftrace_modify_code, &param, cpu_online_mask);
}
#endif
#endif /* CONFIG_DYNAMIC_FTRACE */
/* _mcount is defined in abi's mcount.S */
EXPORT_SYMBOL(_mcount);

View File

@ -12,12 +12,17 @@ struct stackframe {
static int unwind_frame_kernel(struct stackframe *frame)
{
if (kstack_end((void *)frame->fp))
unsigned long low = (unsigned long)task_stack_page(current);
unsigned long high = low + THREAD_SIZE;
if (unlikely(frame->fp < low || frame->fp > high))
return -EPERM;
if (frame->fp & 0x3 || frame->fp < TASK_SIZE)
if (kstack_end((void *)frame->fp) || frame->fp & 0x3)
return -EPERM;
*frame = *(struct stackframe *)frame->fp;
if (__kernel_text_address(frame->lr)) {
int graph = 0;

View File

@ -11,6 +11,11 @@
#define UPROBE_TRAP_NR UINT_MAX
bool is_swbp_insn(uprobe_opcode_t *insn)
{
return (*insn & 0xffff) == UPROBE_SWBP_INSN;
}
unsigned long uprobe_get_swbp_addr(struct pt_regs *regs)
{
return instruction_pointer(regs);

View File

@ -35,7 +35,7 @@ void flush_thread(void){}
*/
unsigned long thread_saved_pc(struct task_struct *tsk)
{
struct switch_stack *sw = (struct switch_stack *)tsk->thread.ksp;
struct switch_stack *sw = (struct switch_stack *)tsk->thread.sp;
return sw->r15;
}
@ -56,8 +56,8 @@ int copy_thread_tls(unsigned long clone_flags,
childstack = ((struct switch_stack *) childregs) - 1;
memset(childstack, 0, sizeof(struct switch_stack));
/* setup ksp for switch_to !!! */
p->thread.ksp = (unsigned long)childstack;
/* setup thread.sp for switch_to !!! */
p->thread.sp = (unsigned long)childstack;
if (unlikely(p->flags & PF_KTHREAD)) {
memset(childregs, 0, sizeof(struct pt_regs));
@ -98,37 +98,6 @@ int dump_task_regs(struct task_struct *tsk, elf_gregset_t *pr_regs)
return 1;
}
unsigned long get_wchan(struct task_struct *p)
{
unsigned long lr;
unsigned long *fp, *stack_start, *stack_end;
int count = 0;
if (!p || p == current || p->state == TASK_RUNNING)
return 0;
stack_start = (unsigned long *)end_of_stack(p);
stack_end = (unsigned long *)(task_stack_page(p) + THREAD_SIZE);
fp = (unsigned long *) thread_saved_fp(p);
do {
if (fp < stack_start || fp > stack_end)
return 0;
#ifdef CONFIG_STACKTRACE
lr = fp[1];
fp = (unsigned long *)fp[0];
#else
lr = *fp++;
#endif
if (!in_sched_functions(lr) &&
__kernel_text_address(lr))
return lr;
} while (count++ < 16);
return 0;
}
EXPORT_SYMBOL(get_wchan);
#ifndef CONFIG_CPU_PM_NONE
void arch_cpu_idle(void)
{

View File

@ -41,6 +41,9 @@ static void singlestep_disable(struct task_struct *tsk)
regs = task_pt_regs(tsk);
regs->sr = (regs->sr & TRACE_MODE_MASK) | TRACE_MODE_RUN;
/* Enable irq */
regs->sr |= BIT(6);
}
static void singlestep_enable(struct task_struct *tsk)
@ -49,6 +52,9 @@ static void singlestep_enable(struct task_struct *tsk)
regs = task_pt_regs(tsk);
regs->sr = (regs->sr & TRACE_MODE_MASK) | TRACE_MODE_SI;
/* Disable irq */
regs->sr &= ~BIT(6);
}
/*

View File

@ -1,57 +1,159 @@
// SPDX-License-Identifier: GPL-2.0
/* Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd. */
#include <linux/sched/debug.h>
#include <linux/sched/task_stack.h>
#include <linux/stacktrace.h>
#include <linux/ftrace.h>
#include <linux/ptrace.h>
#ifdef CONFIG_FRAME_POINTER
struct stackframe {
unsigned long fp;
unsigned long ra;
};
void notrace walk_stackframe(struct task_struct *task, struct pt_regs *regs,
bool (*fn)(unsigned long, void *), void *arg)
{
unsigned long fp, sp, pc;
if (regs) {
fp = frame_pointer(regs);
sp = user_stack_pointer(regs);
pc = instruction_pointer(regs);
} else if (task == NULL || task == current) {
const register unsigned long current_sp __asm__ ("sp");
const register unsigned long current_fp __asm__ ("r8");
fp = current_fp;
sp = current_sp;
pc = (unsigned long)walk_stackframe;
} else {
/* task blocked in __switch_to */
fp = thread_saved_fp(task);
sp = thread_saved_sp(task);
pc = thread_saved_lr(task);
}
for (;;) {
unsigned long low, high;
struct stackframe *frame;
if (unlikely(!__kernel_text_address(pc) || fn(pc, arg)))
break;
/* Validate frame pointer */
low = sp;
high = ALIGN(sp, THREAD_SIZE);
if (unlikely(fp < low || fp > high || fp & 0x3))
break;
/* Unwind stack frame */
frame = (struct stackframe *)fp;
sp = fp;
fp = frame->fp;
pc = ftrace_graph_ret_addr(current, NULL, frame->ra,
(unsigned long *)(fp - 8));
}
}
#else /* !CONFIG_FRAME_POINTER */
static void notrace walk_stackframe(struct task_struct *task,
struct pt_regs *regs, bool (*fn)(unsigned long, void *), void *arg)
{
unsigned long sp, pc;
unsigned long *ksp;
if (regs) {
sp = user_stack_pointer(regs);
pc = instruction_pointer(regs);
} else if (task == NULL || task == current) {
const register unsigned long current_sp __asm__ ("sp");
sp = current_sp;
pc = (unsigned long)walk_stackframe;
} else {
/* task blocked in __switch_to */
sp = thread_saved_sp(task);
pc = thread_saved_lr(task);
}
if (unlikely(sp & 0x3))
return;
ksp = (unsigned long *)sp;
while (!kstack_end(ksp)) {
if (__kernel_text_address(pc) && unlikely(fn(pc, arg)))
break;
pc = (*ksp++) - 0x4;
}
}
#endif /* CONFIG_FRAME_POINTER */
static bool print_trace_address(unsigned long pc, void *arg)
{
print_ip_sym(pc);
return false;
}
void show_stack(struct task_struct *task, unsigned long *sp)
{
pr_cont("Call Trace:\n");
walk_stackframe(task, NULL, print_trace_address, NULL);
}
static bool save_wchan(unsigned long pc, void *arg)
{
if (!in_sched_functions(pc)) {
unsigned long *p = arg;
*p = pc;
return true;
}
return false;
}
unsigned long get_wchan(struct task_struct *task)
{
unsigned long pc = 0;
if (likely(task && task != current && task->state != TASK_RUNNING))
walk_stackframe(task, NULL, save_wchan, &pc);
return pc;
}
#ifdef CONFIG_STACKTRACE
static bool __save_trace(unsigned long pc, void *arg, bool nosched)
{
struct stack_trace *trace = arg;
if (unlikely(nosched && in_sched_functions(pc)))
return false;
if (unlikely(trace->skip > 0)) {
trace->skip--;
return false;
}
trace->entries[trace->nr_entries++] = pc;
return (trace->nr_entries >= trace->max_entries);
}
static bool save_trace(unsigned long pc, void *arg)
{
return __save_trace(pc, arg, false);
}
/*
* Save stack-backtrace addresses into a stack_trace buffer.
*/
void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
{
walk_stackframe(tsk, NULL, save_trace, trace);
}
EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
void save_stack_trace(struct stack_trace *trace)
{
save_stack_trace_tsk(current, trace);
save_stack_trace_tsk(NULL, trace);
}
EXPORT_SYMBOL_GPL(save_stack_trace);
void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
{
unsigned long *fp, *stack_start, *stack_end;
unsigned long addr;
int skip = trace->skip;
int savesched;
int graph_idx = 0;
if (tsk == current) {
asm volatile("mov %0, r8\n":"=r"(fp));
savesched = 1;
} else {
fp = (unsigned long *)thread_saved_fp(tsk);
savesched = 0;
}
addr = (unsigned long) fp & THREAD_MASK;
stack_start = (unsigned long *) addr;
stack_end = (unsigned long *) (addr + THREAD_SIZE);
while (fp > stack_start && fp < stack_end) {
unsigned long lpp, fpp;
fpp = fp[0];
lpp = fp[1];
if (!__kernel_text_address(lpp))
break;
else
lpp = ftrace_graph_ret_addr(tsk, &graph_idx, lpp, NULL);
if (savesched || !in_sched_functions(lpp)) {
if (skip) {
skip--;
} else {
trace->entries[trace->nr_entries++] = lpp;
if (trace->nr_entries >= trace->max_entries)
break;
}
}
fp = (unsigned long *)fpp;
}
}
EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
#endif /* CONFIG_STACKTRACE */

View File

@ -7,10 +7,7 @@
unsigned long raw_copy_from_user(void *to, const void *from,
unsigned long n)
{
if (access_ok(from, n))
__copy_user_zeroing(to, from, n);
else
memset(to, 0, n);
___copy_from_user(to, from, n);
return n;
}
EXPORT_SYMBOL(raw_copy_from_user);
@ -18,8 +15,7 @@ EXPORT_SYMBOL(raw_copy_from_user);
unsigned long raw_copy_to_user(void *to, const void *from,
unsigned long n)
{
if (access_ok(to, n))
__copy_user(to, from, n);
___copy_to_user(to, from, n);
return n;
}
EXPORT_SYMBOL(raw_copy_to_user);

View File

@ -130,7 +130,7 @@ config PPC
select ARCH_HAS_PTE_SPECIAL
select ARCH_HAS_MEMBARRIER_CALLBACKS
select ARCH_HAS_SCALED_CPUTIME if VIRT_CPU_ACCOUNTING_NATIVE && PPC_BOOK3S_64
select ARCH_HAS_STRICT_KERNEL_RWX if ((PPC_BOOK3S_64 || PPC32) && !HIBERNATION)
select ARCH_HAS_STRICT_KERNEL_RWX if (PPC32 && !HIBERNATION)
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_HAS_UACCESS_FLUSHCACHE
select ARCH_HAS_UACCESS_MCSAFE if PPC64

View File

@ -17,9 +17,9 @@
* updating the accessed and modified bits in the page table tree.
*/
#define _PAGE_USER 0x001 /* usermode access allowed */
#define _PAGE_RW 0x002 /* software: user write access allowed */
#define _PAGE_PRESENT 0x004 /* software: pte contains a translation */
#define _PAGE_PRESENT 0x001 /* software: pte contains a translation */
#define _PAGE_HASHPTE 0x002 /* hash_page has made an HPTE for this pte */
#define _PAGE_USER 0x004 /* usermode access allowed */
#define _PAGE_GUARDED 0x008 /* G: prohibit speculative access */
#define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */
#define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */
@ -27,7 +27,7 @@
#define _PAGE_DIRTY 0x080 /* C: page changed */
#define _PAGE_ACCESSED 0x100 /* R: page referenced */
#define _PAGE_EXEC 0x200 /* software: exec allowed */
#define _PAGE_HASHPTE 0x400 /* hash_page has made an HPTE for this pte */
#define _PAGE_RW 0x400 /* software: user write access allowed */
#define _PAGE_SPECIAL 0x800 /* software: Special page */
#ifdef CONFIG_PTE_64BIT

Some files were not shown because too many files have changed in this diff Show More