arm64: dts: qcom: pmk8350: Allow specifying arbitrary SID

PMK8350 is shipped on SID6 with some SoCs, for example with SM6375.
Add some preprocessor logic to allow changing the SID in cases like
this.

While I am not in favour of adding #if's into the device tree, this
is the least messy way to handle this. If one isn't specified, it
will default to 0 (as it has been previously).

Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221115152727.9736-3-konrad.dybcio@linaro.org
This commit is contained in:
Konrad Dybcio 2022-11-15 16:27:20 +01:00 committed by Bjorn Andersson
parent d409e44d2e
commit f73de026a4

View File

@ -8,10 +8,15 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
/* (Sadly) this PMIC can be configured to be at different SIDs */
#ifndef PMK8350_SID
#define PMK8350_SID 0
#endif
&spmi_bus {
pmk8350: pmic@0 {
pmk8350: pmic@PMK8350_SID {
compatible = "qcom,pmk8350", "qcom,spmi-pmic";
reg = <0x0 SPMI_USID>;
reg = <PMK8350_SID SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
@ -21,14 +26,14 @@
pon_pwrkey: pwrkey {
compatible = "qcom,pmk8350-pwrkey";
interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
interrupts = <PMK8350_SID 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
linux,code = <KEY_POWER>;
status = "disabled";
};
pon_resin: resin {
compatible = "qcom,pmk8350-resin";
interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
interrupts = <PMK8350_SID 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
status = "disabled";
};
};
@ -38,14 +43,14 @@
reg = <0x3100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
interrupts = <PMK8350_SID 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
#io-channel-cells = <1>;
};
pmk8350_adc_tm: adc-tm@3400 {
compatible = "qcom,adc-tm7";
reg = <0x3400>;
interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
interrupts = <PMK8350_SID 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
#thermal-sensor-cells = <1>;
@ -56,7 +61,7 @@
compatible = "qcom,pmk8350-rtc";
reg = <0x6100>, <0x6200>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
interrupts = <PMK8350_SID 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};