media: admin-guide: Add starfive_camss.rst for Starfive Camera Subsystem

Add starfive_camss.rst file that documents the Starfive Camera
Subsystem driver which is used for handing image sensor data.

Signed-off-by: Jack Zhu <jack.zhu@starfivetech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This commit is contained in:
Jack Zhu 2023-10-25 11:14:15 +08:00 committed by Hans Verkuil
parent f5502cd25a
commit f72f80550d
4 changed files with 86 additions and 0 deletions

View File

@ -0,0 +1,72 @@
.. SPDX-License-Identifier: GPL-2.0
.. include:: <isonum.txt>
================================
Starfive Camera Subsystem driver
================================
Introduction
------------
This file documents the driver for the Starfive Camera Subsystem found on
Starfive JH7110 SoC. The driver is located under drivers/staging/media/starfive/
camss.
The driver implements V4L2, Media controller and v4l2_subdev interfaces. Camera
sensor using V4L2 subdev interface in the kernel is supported.
The driver has been successfully used on the Gstreamer 1.18.5 with v4l2src
plugin.
Starfive Camera Subsystem hardware
----------------------------------
The Starfive Camera Subsystem hardware consists of::
|\ +---------------+ +-----------+
+----------+ | \ | | | |
| | | | | | | |
| MIPI |----->| |----->| ISP |----->| |
| | | | | | | |
+----------+ | | | | | Memory |
|MUX| +---------------+ | Interface |
+----------+ | | | |
| | | |---------------------------->| |
| Parallel |----->| | | |
| | | | | |
+----------+ | / | |
|/ +-----------+
- MIPI: The MIPI interface, receiving data from a MIPI CSI-2 camera sensor.
- Parallel: The parallel interface, receiving data from a parallel sensor.
- ISP: The ISP, processing raw Bayer data from an image sensor and producing
YUV frames.
Topology
--------
The media controller pipeline graph is as follows:
.. _starfive_camss_graph:
.. kernel-figure:: starfive_camss_graph.dot
:alt: starfive_camss_graph.dot
:align: center
The driver has 2 video devices:
- capture_raw: The capture device, capturing image data directly from a sensor.
- capture_yuv: The capture device, capturing YUV frame data processed by the
ISP module
The driver has 3 subdevices:
- stf_isp: is responsible for all the isp operations, outputs YUV frames.
- cdns_csi2rx: a CSI-2 bridge supporting up to 4 CSI lanes in input, and 4
different pixel streams in output.
- imx219: an image sensor, image data is sent through MIPI CSI-2.

View File

@ -0,0 +1,12 @@
digraph board {
rankdir=TB
n00000001 [label="{{<port0> 0} | stf_isp\n/dev/v4l-subdev0 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
n00000001:port1 -> n00000008 [style=dashed]
n00000004 [label="capture_raw\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
n00000008 [label="capture_yuv\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
n0000000e [label="{{<port0> 0} | cdns_csi2rx.19800000.csi-bridge\n | {<port1> 1 | <port2> 2 | <port3> 3 | <port4> 4}}", shape=Mrecord, style=filled, fillcolor=green]
n0000000e:port1 -> n00000001:port0 [style=dashed]
n0000000e:port1 -> n00000004 [style=dashed]
n00000018 [label="{{} | imx219 6-0010\n/dev/v4l-subdev1 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
n00000018:port0 -> n0000000e:port0 [style=bold]
}

View File

@ -28,6 +28,7 @@ Video4Linux (V4L) driver-specific documentation
si470x
si4713
si476x
starfive_camss
vimc
visl
vivid

View File

@ -20643,6 +20643,7 @@ M: Jack Zhu <jack.zhu@starfivetech.com>
M: Changhuang Liang <changhuang.liang@starfivetech.com>
L: linux-media@vger.kernel.org
S: Maintained
F: Documentation/admin-guide/media/starfive_camss.rst
F: Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
STARFIVE CRYPTO DRIVER