Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-10-31 17:21:49 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'samsung/pinctrl' into next/dt2

Browse Source 
* samsung/pinctrl:
  pinctrl: exynos: Fix wakeup IRQ domain registration check
  pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data
  pinctrl: exynos: Correct the detection of wakeup-eint node
  pinctrl: exynos: Mark exynos_irq_demux_eint as inline
  pinctrl: exynos: Handle only unmasked wakeup interrupts
  pinctrl: exynos: Fix typos in gpio/wkup _irq_mask
  pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa
  ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform
  ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC
  ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used
  gpio: exynos4: skip gpiolib registration if pinctrl driver is used
  pinctrl: add exynos4210 specific extensions for samsung pinctrl driver
  pinctrl: add samsung pinctrl and gpiolib driver
This commit is contained in:
Olof Johansson 2012-09-29 11:30:11 -07:00
commit f514202112
12 changed files with 2674 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

196
Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt Normal file
View File

@ -0,0 +1,196 @@
Samsung GPIO and Pin Mux/Config controller
Samsung's ARM based SoC's integrates a GPIO and Pin mux/config hardware
controller. It controls the input/output settings on the available pads/pins
and also provides ability to multiplex and configure the output of various
on-chip controllers onto these pads.
Required Properties:
- compatible: should be one of the following.
- "samsung,pinctrl-exynos4210": for Exynos4210 compatible pin-controller.
- "samsung,pinctrl-exynos5250": for Exynos5250 compatible pin-controller.
- reg: Base address of the pin controller hardware module and length of
the address space it occupies.
- interrupts: interrupt specifier for the controller. The format and value of
the interrupt specifier depends on the interrupt parent for the controller.
- Pin mux/config groups as child nodes: The pin mux (selecting pin function
mode) and pin config (pull up/down, driver strength) settings are represented
as child nodes of the pin-controller node. There should be atleast one
child node and there is no limit on the count of these child nodes.
The child node should contain a list of pin(s) on which a particular pin
function selection or pin configuration (or both) have to applied. This
list of pins is specified using the property name "samsung,pins". There
should be atleast one pin specfied for this property and there is no upper
limit on the count of pins that can be specified. The pins are specified
using pin names which are derived from the hardware manual of the SoC. As
an example, the pins in GPA0 bank of the pin controller can be represented
as "gpa0-0", "gpa0-1", "gpa0-2" and so on. The names should be in lower case.
The format of the pin names should be (as per the hardware manual)
"[pin bank name]-[pin number within the bank]".
The pin function selection that should be applied on the pins listed in the
child node is specified using the "samsung,pin-function" property. The value
of this property that should be applied to each of the pins listed in the
"samsung,pins" property should be picked from the hardware manual of the SoC
for the specified pin group. This property is optional in the child node if
no specific function selection is desired for the pins listed in the child
node. The value of this property is used as-is to program the pin-controller
function selector register of the pin-bank.
The child node can also optionally specify one or more of the pin
configuration that should be applied on all the pins listed in the
"samsung,pins" property of the child node. The following pin configuration
properties are supported.
- samsung,pin-pud: Pull up/down configuration.
- samsung,pin-drv: Drive strength configuration.
- samsung,pin-pud-pdn: Pull up/down configuration in power down mode.
- samsung,pin-drv-pdn: Drive strength configuration in power down mode.
The values specified by these config properties should be derived from the
hardware manual and these values are programmed as-is into the pin
pull up/down and driver strength register of the pin-controller.
Note: A child should include atleast a pin function selection property or
pin configuration property (one or more) or both.
The client nodes that require a particular pin function selection and/or
pin configuration should use the bindings listed in the "pinctrl-bindings.txt"
file.
External GPIO and Wakeup Interrupts:
The controller supports two types of external interrupts over gpio. The first
is the external gpio interrupt and second is the external wakeup interrupts.
The difference between the two is that the external wakeup interrupts can be
used as system wakeup events.
A. External GPIO Interrupts: For supporting external gpio interrupts, the
following properties should be specified in the pin-controller device node.
- interrupt-controller: identifies the controller node as interrupt-parent.
- #interrupt-cells: the value of this property should be 2.
- First Cell: represents the external gpio interrupt number local to the
external gpio interrupt space of the controller.
- Second Cell: flags to identify the type of the interrupt
- 1 = rising edge triggered
- 2 = falling edge triggered
- 3 = rising and falling edge triggered
- 4 = high level triggered
- 8 = low level triggered
B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
child node representing the external wakeup interrupt controller should be
included in the pin-controller device node. This child node should include
the following properties.
- compatible: identifies the type of the external wakeup interrupt controller
The possible values are:
- samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller
found on Samsung Exynos4210 SoC.
- interrupt-parent: phandle of the interrupt parent to which the external
wakeup interrupts are forwarded to.
- interrupt-controller: identifies the node as interrupt-parent.
- #interrupt-cells: the value of this property should be 2
- First Cell: represents the external wakeup interrupt number local to
the external wakeup interrupt space of the controller.
- Second Cell: flags to identify the type of the interrupt
- 1 = rising edge triggered
- 2 = falling edge triggered
- 3 = rising and falling edge triggered
- 4 = high level triggered
- 8 = low level triggered
Aliases:
All the pin controller nodes should be represented in the aliases node using
the following format 'pinctrl{n}' where n is a unique number for the alias.
Example 1: A pin-controller node with pin groups.
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x11400000 0x1000>;
interrupts = <0 47 0>;
uart0_data: uart0-data {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart1_data: uart1-data {
samsung,pins = "gpa0-4", "gpa0-5";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
i2c2_bus: i2c2-bus {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
};
Example 2: A pin-controller node with external wakeup interrupt controller node.
pinctrl_1: pinctrl@11000000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x11000000 0x1000>;
interrupts = <0 46 0>;
interrupt-controller;
#interrupt-cells = <2>;
wakup_eint: wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
<0 32 0>;
};
};
Example 3: A uart client node that supports 'default' and 'flow-control' states.
uart@13800000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
interrupts = <0 52 0>;
pinctrl-names = "default", "flow-control;
pinctrl-0 = <&uart0_data>;
pinctrl-1 = <&uart0_data &uart0_fctl>;
};
Example 4: Set up the default pin state for uart controller.
static int s3c24xx_serial_probe(struct platform_device *pdev) {
struct pinctrl *pinctrl;
...
...
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
}

457
arch/arm/boot/dts/exynos4210-pinctrl.dtsi Normal file
View File

@ -0,0 +1,457 @@
/*
* Samsung's Exynos4210 SoC pin-mux and pin-config device tree source
*
* Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
* Copyright (c) 2011-2012 Linaro Ltd.
* www.linaro.org
*
* Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device
* tree nodes are listed in this file.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/ {
pinctrl@11400000 {
uart0_data: uart0-data {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <0x2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart1_data: uart1-data {
samsung,pins = "gpa0-4", "gpa0-5";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
i2c2_bus: i2c2-bus {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
uart2_data: uart2-data {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart2_fctl: uart2-fctl {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart_audio_a: uart-audio-a {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <4>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
i2c3_bus: i2c3-bus {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
uart3_data: uart3-data {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart_audio_b: uart-audio-b {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <4>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
spi0_bus: spi0-bus {
samsung,pins = "gpb-0", "gpb-2", "gpb-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2c4_bus: i2c4-bus {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
spi1_bus: spi1-bus {
samsung,pins = "gpb-4", "gpb-6", "gpb-7";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2c5_bus: i2c5-bus {
samsung,pins = "gpb-6", "gpb-7";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2s1_bus: i2s1-bus {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
pcm1_bus: pcm1-bus {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
ac97_bus: ac97-bus {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <4>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
i2s2_bus: i2s2-bus {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
pcm2_bus: pcm2-bus {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
spdif_bus: spdif-bus {
samsung,pins = "gpc1-0", "gpc1-1";
samsung,pin-function = <4>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
i2c6_bus: i2c6-bus {
samsung,pins = "gpc1-3", "gpc1-4";
samsung,pin-function = <4>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
spi2_bus: spi2-bus {
samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
samsung,pin-function = <5>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2c7_bus: i2c7-bus {
samsung,pins = "gpd0-2", "gpd0-3";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2c0_bus: i2c0-bus {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2c1_bus: i2c1-bus {
samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
};
pinctrl@11000000 {
sd0_clk: sd0-clk {
samsung,pins = "gpk0-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
sd0_cmd: sd0-cmd {
samsung,pins = "gpk0-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
sd0_cd: sd0-cd {
samsung,pins = "gpk0-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd0_bus1: sd0-bus-width1 {
samsung,pins = "gpk0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd0_bus4: sd0-bus-width4 {
samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd0_bus8: sd0-bus-width8 {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd4_clk: sd4-clk {
samsung,pins = "gpk0-0";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
sd4_cmd: sd4-cmd {
samsung,pins = "gpk0-1";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
sd4_cd: sd4-cd {
samsung,pins = "gpk0-2";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd4_bus1: sd4-bus-width1 {
samsung,pins = "gpk0-3";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd4_bus4: sd4-bus-width4 {
samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd4_bus8: sd4-bus-width8 {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <3>;
samsung,pin-pud = <4>;
samsung,pin-drv = <0>;
};
sd1_clk: sd1-clk {
samsung,pins = "gpk1-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gpk1-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
sd1_cd: sd1-cd {
samsung,pins = "gpk1-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd1_bus1: sd1-bus-width1 {
samsung,pins = "gpk1-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd1_bus4: sd1-bus-width4 {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd2_clk: sd2-clk {
samsung,pins = "gpk2-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
sd2_cmd: sd2-cmd {
samsung,pins = "gpk2-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
sd2_cd: sd2-cd {
samsung,pins = "gpk2-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd2_bus1: sd2-bus-width1 {
samsung,pins = "gpk2-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd2_bus4: sd2-bus-width4 {
samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd2_bus8: sd2-bus-width8 {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd3_clk: sd3-clk {
samsung,pins = "gpk3-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
sd3_cmd: sd3-cmd {
samsung,pins = "gpk3-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
sd3_cd: sd3-cd {
samsung,pins = "gpk3-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd3_bus1: sd3-bus-width1 {
samsung,pins = "gpk3-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd3_bus4: sd3-bus-width4 {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
eint0: ext-int0 {
samsung,pins = "gpx0-0";
samsung,pin-function = <0xf>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
eint8: ext-int8 {
samsung,pins = "gpx1-0";
samsung,pin-function = <0xf>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
eint15: ext-int15 {
samsung,pins = "gpx1-7";
samsung,pin-function = <0xf>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
eint16: ext-int16 {
samsung,pins = "gpx2-0";
samsung,pin-function = <0xf>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
eint31: ext-int31 {
samsung,pins = "gpx3-7";
samsung,pin-function = <0xf>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
};
pinctrl@03860000 {
i2s0_bus: i2s0-bus {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4", "gpz-5", "gpz-6";
samsung,pin-function = <0x2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
pcm0_bus: pcm0-bus {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4";
samsung,pin-function = <0x3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
};
};

37
arch/arm/boot/dts/exynos4210.dtsi
View File

@ -20,6 +20,7 @@
*/
/include/ "skeleton.dtsi"
/include/ "exynos4210-pinctrl.dtsi"
/ {
compatible = "samsung,exynos4210";
@ -29,6 +30,9 @@
spi0 = &spi_0;
spi1 = &spi_1;
spi2 = &spi_2;
pinctrl0 = &pinctrl_0;
pinctrl1 = &pinctrl_1;
pinctrl2 = &pinctrl_2;
};
gic:interrupt-controller@10490000 {
@ -50,6 +54,39 @@
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
};
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x11400000 0x1000>;
interrupts = <0 47 0>;
interrupt-controller;
#interrupt-cells = <2>;
};
pinctrl_1: pinctrl@11000000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x11000000 0x1000>;
interrupts = <0 46 0>;
interrupt-controller;
#interrupt-cells = <2>;
wakup_eint: wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
<0 32 0>;
};
};
pinctrl_2: pinctrl@03860000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x03860000 0x1000>;
};
watchdog@10060000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;

2
arch/arm/mach-exynos/Kconfig
View File

@ -408,6 +408,8 @@ config MACH_EXYNOS4_DT
select USE_OF
select ARM_AMBA
select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
select PINCTRL
select PINCTRL_EXYNOS4
help
Machine support for Samsung Exynos4 machine with device tree enabled.
Select this if a fdt blob is available for the Exynos4 SoC based board.

26
arch/arm/mach-exynos/common.c
View File

@ -980,6 +980,32 @@ static int __init exynos_init_irq_eint(void)
{
int irq;
#ifdef CONFIG_PINCTRL_SAMSUNG
/*
* The Samsung pinctrl driver provides an integrated gpio/pinmux/pinconf
* functionality along with support for external gpio and wakeup
* interrupts. If the samsung pinctrl driver is enabled and includes
* the wakeup interrupt support, then the setting up external wakeup
* interrupts here can be skipped. This check here is temporary to
* allow exynos4 platforms that do not use Samsung pinctrl driver to
* co-exist with platforms that do. When all of the Samsung Exynos4
* platforms switch over to using the pinctrl driver, the wakeup
* interrupt support code here can be completely removed.
*/
struct device_node *pctrl_np, *wkup_np;
const char *pctrl_compat = "samsung,pinctrl-exynos4210";
const char *wkup_compat = "samsung,exynos4210-wakeup-eint";
for_each_compatible_node(pctrl_np, NULL, pctrl_compat) {
if (of_device_is_available(pctrl_np)) {
wkup_np = of_find_compatible_node(pctrl_np, NULL,
wkup_compat);
if (wkup_np)
return -ENODEV;
}
}
#endif
if (soc_is_exynos5250())
exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K);
else

21
drivers/gpio/gpio-samsung.c
View File

@ -2734,6 +2734,27 @@ static __init void exynos4_gpiolib_init(void)
int group = 0;
void __iomem *gpx_base;
#ifdef CONFIG_PINCTRL_SAMSUNG
/*
* This gpio driver includes support for device tree support and
* there are platforms using it. In order to maintain
* compatibility with those platforms, and to allow non-dt
* Exynos4210 platforms to use this gpiolib support, a check
* is added to find out if there is a active pin-controller
* driver support available. If it is available, this gpiolib
* support is ignored and the gpiolib support available in
* pin-controller driver is used. This is a temporary check and
* will go away when all of the Exynos4210 platforms have
* switched to using device tree and the pin-ctrl driver.
*/
struct device_node *pctrl_np;
const char *pctrl_compat = "samsung,pinctrl-exynos4210";
pctrl_np = of_find_compatible_node(NULL, NULL, pctrl_compat);
if (pctrl_np)
if (of_device_is_available(pctrl_np))
return;
#endif
/* gpio part1 */
gpio_base1 = ioremap(EXYNOS4_PA_GPIO1, SZ_4K);
if (gpio_base1 == NULL) {

9
drivers/pinctrl/Kconfig
View File

@ -145,6 +145,15 @@ config PINCTRL_COH901
COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
ports of 8 GPIO pins each.
config PINCTRL_SAMSUNG
bool "Samsung pinctrl driver"
select PINMUX
select PINCONF
config PINCTRL_EXYNOS4
bool "Pinctrl driver data for Exynos4 SoC"
select PINCTRL_SAMSUNG
source "drivers/pinctrl/spear/Kconfig"
endmenu

2
drivers/pinctrl/Makefile
View File

@ -29,5 +29,7 @@ obj-$(CONFIG_PINCTRL_TEGRA20) += pinctrl-tegra20.o
obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o
obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o
obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o
obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o
obj-$(CONFIG_PINCTRL_EXYNOS4) += pinctrl-exynos.o
obj-$(CONFIG_PLAT_SPEAR) += spear/

579
drivers/pinctrl/pinctrl-exynos.c Normal file
View File

@ -0,0 +1,579 @@
/*
* Exynos specific support for Samsung pinctrl/gpiolib driver with eint support.
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
* Copyright (c) 2012 Linaro Ltd
* http://www.linaro.org
*
* Author: Thomas Abraham <thomas.ab@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This file contains the Samsung Exynos specific information required by the
* the Samsung pinctrl/gpiolib driver. It also includes the implementation of
* external gpio and wakeup interrupt support.
*/
#include <linux/module.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/irqdomain.h>
#include <linux/irq.h>
#include <linux/of_irq.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <asm/mach/irq.h>
#include "pinctrl-samsung.h"
#include "pinctrl-exynos.h"
/* list of external wakeup controllers supported */
static const struct of_device_id exynos_wkup_irq_ids[] = {
{ .compatible = "samsung,exynos4210-wakeup-eint", },
};
static void exynos_gpio_irq_unmask(struct irq_data *irqd)
{
struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
unsigned long reg_mask = d->ctrl->geint_mask + edata->eint_offset;
unsigned long mask;
mask = readl(d->virt_base + reg_mask);
mask &= ~(1 << edata->pin);
writel(mask, d->virt_base + reg_mask);
}
static void exynos_gpio_irq_mask(struct irq_data *irqd)
{
struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
unsigned long reg_mask = d->ctrl->geint_mask + edata->eint_offset;
unsigned long mask;
mask = readl(d->virt_base + reg_mask);
mask |= 1 << edata->pin;
writel(mask, d->virt_base + reg_mask);
}
static void exynos_gpio_irq_ack(struct irq_data *irqd)
{
struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
unsigned long reg_pend = d->ctrl->geint_pend + edata->eint_offset;
writel(1 << edata->pin, d->virt_base + reg_pend);
}
static int exynos_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
{
struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
struct samsung_pin_ctrl *ctrl = d->ctrl;
struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
struct samsung_pin_bank *bank = edata->bank;
unsigned int shift = EXYNOS_EINT_CON_LEN * edata->pin;
unsigned int con, trig_type;
unsigned long reg_con = ctrl->geint_con + edata->eint_offset;
unsigned int mask;
switch (type) {
case IRQ_TYPE_EDGE_RISING:
trig_type = EXYNOS_EINT_EDGE_RISING;
break;
case IRQ_TYPE_EDGE_FALLING:
trig_type = EXYNOS_EINT_EDGE_FALLING;
break;
case IRQ_TYPE_EDGE_BOTH:
trig_type = EXYNOS_EINT_EDGE_BOTH;
break;
case IRQ_TYPE_LEVEL_HIGH:
trig_type = EXYNOS_EINT_LEVEL_HIGH;
break;
case IRQ_TYPE_LEVEL_LOW:
trig_type = EXYNOS_EINT_LEVEL_LOW;
break;
default:
pr_err("unsupported external interrupt type\n");
return -EINVAL;
}
if (type & IRQ_TYPE_EDGE_BOTH)
__irq_set_handler_locked(irqd->irq, handle_edge_irq);
else
__irq_set_handler_locked(irqd->irq, handle_level_irq);
con = readl(d->virt_base + reg_con);
con &= ~(EXYNOS_EINT_CON_MASK << shift);
con |= trig_type << shift;
writel(con, d->virt_base + reg_con);
reg_con = bank->pctl_offset;
shift = edata->pin * bank->func_width;
mask = (1 << bank->func_width) - 1;
con = readl(d->virt_base + reg_con);
con &= ~(mask << shift);
con |= EXYNOS_EINT_FUNC << shift;
writel(con, d->virt_base + reg_con);
return 0;
}
/*
* irq_chip for gpio interrupts.
*/
static struct irq_chip exynos_gpio_irq_chip = {
.name = "exynos_gpio_irq_chip",
.irq_unmask = exynos_gpio_irq_unmask,
.irq_mask = exynos_gpio_irq_mask,
.irq_ack = exynos_gpio_irq_ack,
.irq_set_type = exynos_gpio_irq_set_type,
};
/*
* given a controller-local external gpio interrupt number, prepare the handler
* data for it.
*/
static struct exynos_geint_data *exynos_get_eint_data(irq_hw_number_t hw,
struct samsung_pinctrl_drv_data *d)
{
struct samsung_pin_bank *bank = d->ctrl->pin_banks;
struct exynos_geint_data *eint_data;
unsigned int nr_banks = d->ctrl->nr_banks, idx;
unsigned int irq_base = 0, eint_offset = 0;
if (hw >= d->ctrl->nr_gint) {
dev_err(d->dev, "unsupported ext-gpio interrupt\n");
return NULL;
}
for (idx = 0; idx < nr_banks; idx++, bank++) {
if (bank->eint_type != EINT_TYPE_GPIO)
continue;
if ((hw >= irq_base) && (hw < (irq_base + bank->nr_pins)))
break;
irq_base += bank->nr_pins;
eint_offset += 4;
}
if (idx == nr_banks) {
dev_err(d->dev, "pin bank not found for ext-gpio interrupt\n");
return NULL;
}
eint_data = devm_kzalloc(d->dev, sizeof(*eint_data), GFP_KERNEL);
if (!eint_data) {
dev_err(d->dev, "no memory for eint-gpio data\n");
return NULL;
}
eint_data->bank = bank;
eint_data->pin = hw - irq_base;
eint_data->eint_offset = eint_offset;
return eint_data;
}
static int exynos_gpio_irq_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
struct samsung_pinctrl_drv_data *d = h->host_data;
struct exynos_geint_data *eint_data;
eint_data = exynos_get_eint_data(hw, d);
if (!eint_data)
return -EINVAL;
irq_set_handler_data(virq, eint_data);
irq_set_chip_data(virq, h->host_data);
irq_set_chip_and_handler(virq, &exynos_gpio_irq_chip,
handle_level_irq);
set_irq_flags(virq, IRQF_VALID);
return 0;
}
static void exynos_gpio_irq_unmap(struct irq_domain *h, unsigned int virq)
{
struct samsung_pinctrl_drv_data *d = h->host_data;
struct exynos_geint_data *eint_data;
eint_data = irq_get_handler_data(virq);
devm_kfree(d->dev, eint_data);
}
/*
* irq domain callbacks for external gpio interrupt controller.
*/
static const struct irq_domain_ops exynos_gpio_irqd_ops = {
.map = exynos_gpio_irq_map,
.unmap = exynos_gpio_irq_unmap,
.xlate = irq_domain_xlate_twocell,
};
static irqreturn_t exynos_eint_gpio_irq(int irq, void *data)
{
struct samsung_pinctrl_drv_data *d = data;
struct samsung_pin_ctrl *ctrl = d->ctrl;
struct samsung_pin_bank *bank = ctrl->pin_banks;
unsigned int svc, group, pin, virq;
svc = readl(d->virt_base + ctrl->svc);
group = EXYNOS_SVC_GROUP(svc);
pin = svc & EXYNOS_SVC_NUM_MASK;
if (!group)
return IRQ_HANDLED;
bank += (group - 1);
virq = irq_linear_revmap(d->gpio_irqd, bank->irq_base + pin);
if (!virq)
return IRQ_NONE;
generic_handle_irq(virq);
return IRQ_HANDLED;
}
/*
* exynos_eint_gpio_init() - setup handling of external gpio interrupts.
* @d: driver data of samsung pinctrl driver.
*/
static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
{
struct device *dev = d->dev;
unsigned int ret;
if (!d->irq) {
dev_err(dev, "irq number not available\n");
return -EINVAL;
}
ret = devm_request_irq(dev, d->irq, exynos_eint_gpio_irq,
0, dev_name(dev), d);
if (ret) {
dev_err(dev, "irq request failed\n");
return -ENXIO;
}
d->gpio_irqd = irq_domain_add_linear(dev->of_node, d->ctrl->nr_gint,
&exynos_gpio_irqd_ops, d);
if (!d->gpio_irqd) {
dev_err(dev, "gpio irq domain allocation failed\n");
return -ENXIO;
}
return 0;
}
static void exynos_wkup_irq_unmask(struct irq_data *irqd)
{
struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
unsigned long reg_mask = d->ctrl->weint_mask + (bank << 2);
unsigned long mask;
mask = readl(d->virt_base + reg_mask);
mask &= ~(1 << pin);
writel(mask, d->virt_base + reg_mask);
}
static void exynos_wkup_irq_mask(struct irq_data *irqd)
{
struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
unsigned long reg_mask = d->ctrl->weint_mask + (bank << 2);
unsigned long mask;
mask = readl(d->virt_base + reg_mask);
mask |= 1 << pin;
writel(mask, d->virt_base + reg_mask);
}
static void exynos_wkup_irq_ack(struct irq_data *irqd)
{
struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
unsigned long pend = d->ctrl->weint_pend + (bank << 2);
writel(1 << pin, d->virt_base + pend);
}
static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type)
{
struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
unsigned long reg_con = d->ctrl->weint_con + (bank << 2);
unsigned long shift = EXYNOS_EINT_CON_LEN * pin;
unsigned long con, trig_type;
switch (type) {
case IRQ_TYPE_EDGE_RISING:
trig_type = EXYNOS_EINT_EDGE_RISING;
break;
case IRQ_TYPE_EDGE_FALLING:
trig_type = EXYNOS_EINT_EDGE_FALLING;
break;
case IRQ_TYPE_EDGE_BOTH:
trig_type = EXYNOS_EINT_EDGE_BOTH;
break;
case IRQ_TYPE_LEVEL_HIGH:
trig_type = EXYNOS_EINT_LEVEL_HIGH;
break;
case IRQ_TYPE_LEVEL_LOW:
trig_type = EXYNOS_EINT_LEVEL_LOW;
break;
default:
pr_err("unsupported external interrupt type\n");
return -EINVAL;
}
if (type & IRQ_TYPE_EDGE_BOTH)
__irq_set_handler_locked(irqd->irq, handle_edge_irq);
else
__irq_set_handler_locked(irqd->irq, handle_level_irq);
con = readl(d->virt_base + reg_con);
con &= ~(EXYNOS_EINT_CON_MASK << shift);
con |= trig_type << shift;
writel(con, d->virt_base + reg_con);
return 0;
}
/*
* irq_chip for wakeup interrupts
*/
static struct irq_chip exynos_wkup_irq_chip = {
.name = "exynos_wkup_irq_chip",
.irq_unmask = exynos_wkup_irq_unmask,
.irq_mask = exynos_wkup_irq_mask,
.irq_ack = exynos_wkup_irq_ack,
.irq_set_type = exynos_wkup_irq_set_type,
};
/* interrupt handler for wakeup interrupts 0..15 */
static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
{
struct exynos_weint_data *eintd = irq_get_handler_data(irq);
struct irq_chip *chip = irq_get_chip(irq);
int eint_irq;
chained_irq_enter(chip, desc);
chip->irq_mask(&desc->irq_data);
if (chip->irq_ack)
chip->irq_ack(&desc->irq_data);
eint_irq = irq_linear_revmap(eintd->domain, eintd->irq);
generic_handle_irq(eint_irq);
chip->irq_unmask(&desc->irq_data);
chained_irq_exit(chip, desc);
}
static inline void exynos_irq_demux_eint(int irq_base, unsigned long pend,
struct irq_domain *domain)
{
unsigned int irq;
while (pend) {
irq = fls(pend) - 1;
generic_handle_irq(irq_find_mapping(domain, irq_base + irq));
pend &= ~(1 << irq);
}
}
/* interrupt handler for wakeup interrupt 16 */
static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
{
struct irq_chip *chip = irq_get_chip(irq);
struct exynos_weint_data *eintd = irq_get_handler_data(irq);
struct samsung_pinctrl_drv_data *d = eintd->domain->host_data;
unsigned long pend;
unsigned long mask;
chained_irq_enter(chip, desc);
pend = readl(d->virt_base + d->ctrl->weint_pend + 0x8);
mask = readl(d->virt_base + d->ctrl->weint_mask + 0x8);
exynos_irq_demux_eint(16, pend & ~mask, eintd->domain);
pend = readl(d->virt_base + d->ctrl->weint_pend + 0xC);
mask = readl(d->virt_base + d->ctrl->weint_mask + 0xC);
exynos_irq_demux_eint(24, pend & ~mask, eintd->domain);
chained_irq_exit(chip, desc);
}
static int exynos_wkup_irq_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
irq_set_chip_and_handler(virq, &exynos_wkup_irq_chip, handle_level_irq);
irq_set_chip_data(virq, h->host_data);
set_irq_flags(virq, IRQF_VALID);
return 0;
}
/*
* irq domain callbacks for external wakeup interrupt controller.
*/
static const struct irq_domain_ops exynos_wkup_irqd_ops = {
.map = exynos_wkup_irq_map,
.xlate = irq_domain_xlate_twocell,
};
/*
* exynos_eint_wkup_init() - setup handling of external wakeup interrupts.
* @d: driver data of samsung pinctrl driver.
*/
static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
{
struct device *dev = d->dev;
struct device_node *wkup_np = NULL;
struct device_node *np;
struct exynos_weint_data *weint_data;
int idx, irq;
for_each_child_of_node(dev->of_node, np) {
if (of_match_node(exynos_wkup_irq_ids, np)) {
wkup_np = np;
break;
}
}
if (!wkup_np)
return -ENODEV;
d->wkup_irqd = irq_domain_add_linear(wkup_np, d->ctrl->nr_wint,
&exynos_wkup_irqd_ops, d);
if (!d->wkup_irqd) {
dev_err(dev, "wakeup irq domain allocation failed\n");
return -ENXIO;
}
weint_data = devm_kzalloc(dev, sizeof(*weint_data) * 17, GFP_KERNEL);
if (!weint_data) {
dev_err(dev, "could not allocate memory for weint_data\n");
return -ENOMEM;
}
irq = irq_of_parse_and_map(wkup_np, 16);
if (irq) {
weint_data[16].domain = d->wkup_irqd;
irq_set_chained_handler(irq, exynos_irq_demux_eint16_31);
irq_set_handler_data(irq, &weint_data[16]);
} else {
dev_err(dev, "irq number for EINT16-32 not found\n");
}
for (idx = 0; idx < 16; idx++) {
weint_data[idx].domain = d->wkup_irqd;
weint_data[idx].irq = idx;
irq = irq_of_parse_and_map(wkup_np, idx);
if (irq) {
irq_set_handler_data(irq, &weint_data[idx]);
irq_set_chained_handler(irq, exynos_irq_eint0_15);
} else {
dev_err(dev, "irq number for eint-%x not found\n", idx);
}
}
return 0;
}
/* pin banks of exynos4210 pin-controller 0 */
static struct samsung_pin_bank exynos4210_pin_banks0[] = {
EXYNOS_PIN_BANK_EINTG(0x000, EXYNOS4210_GPIO_A0, "gpa0"),
EXYNOS_PIN_BANK_EINTG(0x020, EXYNOS4210_GPIO_A1, "gpa1"),
EXYNOS_PIN_BANK_EINTG(0x040, EXYNOS4210_GPIO_B, "gpb"),
EXYNOS_PIN_BANK_EINTG(0x060, EXYNOS4210_GPIO_C0, "gpc0"),
EXYNOS_PIN_BANK_EINTG(0x080, EXYNOS4210_GPIO_C1, "gpc1"),
EXYNOS_PIN_BANK_EINTG(0x0A0, EXYNOS4210_GPIO_D0, "gpd0"),
EXYNOS_PIN_BANK_EINTG(0x0C0, EXYNOS4210_GPIO_D1, "gpd1"),
EXYNOS_PIN_BANK_EINTG(0x0E0, EXYNOS4210_GPIO_E0, "gpe0"),
EXYNOS_PIN_BANK_EINTG(0x100, EXYNOS4210_GPIO_E1, "gpe1"),
EXYNOS_PIN_BANK_EINTG(0x120, EXYNOS4210_GPIO_E2, "gpe2"),
EXYNOS_PIN_BANK_EINTG(0x140, EXYNOS4210_GPIO_E3, "gpe3"),
EXYNOS_PIN_BANK_EINTG(0x160, EXYNOS4210_GPIO_E4, "gpe4"),
EXYNOS_PIN_BANK_EINTG(0x180, EXYNOS4210_GPIO_F0, "gpf0"),
EXYNOS_PIN_BANK_EINTG(0x1A0, EXYNOS4210_GPIO_F1, "gpf1"),
EXYNOS_PIN_BANK_EINTG(0x1C0, EXYNOS4210_GPIO_F2, "gpf2"),
EXYNOS_PIN_BANK_EINTG(0x1E0, EXYNOS4210_GPIO_F3, "gpf3"),
};
/* pin banks of exynos4210 pin-controller 1 */
static struct samsung_pin_bank exynos4210_pin_banks1[] = {
EXYNOS_PIN_BANK_EINTG(0x000, EXYNOS4210_GPIO_J0, "gpj0"),
EXYNOS_PIN_BANK_EINTG(0x020, EXYNOS4210_GPIO_J1, "gpj1"),
EXYNOS_PIN_BANK_EINTG(0x040, EXYNOS4210_GPIO_K0, "gpk0"),
EXYNOS_PIN_BANK_EINTG(0x060, EXYNOS4210_GPIO_K1, "gpk1"),
EXYNOS_PIN_BANK_EINTG(0x080, EXYNOS4210_GPIO_K2, "gpk2"),
EXYNOS_PIN_BANK_EINTG(0x0A0, EXYNOS4210_GPIO_K3, "gpk3"),
EXYNOS_PIN_BANK_EINTG(0x0C0, EXYNOS4210_GPIO_L0, "gpl0"),
EXYNOS_PIN_BANK_EINTG(0x0E0, EXYNOS4210_GPIO_L1, "gpl1"),
EXYNOS_PIN_BANK_EINTG(0x100, EXYNOS4210_GPIO_L2, "gpl2"),
EXYNOS_PIN_BANK_EINTN(0x120, EXYNOS4210_GPIO_Y0, "gpy0"),
EXYNOS_PIN_BANK_EINTN(0x140, EXYNOS4210_GPIO_Y1, "gpy1"),
EXYNOS_PIN_BANK_EINTN(0x160, EXYNOS4210_GPIO_Y2, "gpy2"),
EXYNOS_PIN_BANK_EINTN(0x180, EXYNOS4210_GPIO_Y3, "gpy3"),
EXYNOS_PIN_BANK_EINTN(0x1A0, EXYNOS4210_GPIO_Y4, "gpy4"),
EXYNOS_PIN_BANK_EINTN(0x1C0, EXYNOS4210_GPIO_Y5, "gpy5"),
EXYNOS_PIN_BANK_EINTN(0x1E0, EXYNOS4210_GPIO_Y6, "gpy6"),
EXYNOS_PIN_BANK_EINTN(0xC00, EXYNOS4210_GPIO_X0, "gpx0"),
EXYNOS_PIN_BANK_EINTN(0xC20, EXYNOS4210_GPIO_X1, "gpx1"),
EXYNOS_PIN_BANK_EINTN(0xC40, EXYNOS4210_GPIO_X2, "gpx2"),
EXYNOS_PIN_BANK_EINTN(0xC60, EXYNOS4210_GPIO_X3, "gpx3"),
};
/* pin banks of exynos4210 pin-controller 2 */
static struct samsung_pin_bank exynos4210_pin_banks2[] = {
EXYNOS_PIN_BANK_EINTN(0x000, EXYNOS4210_GPIO_Z, "gpz"),
};
/*
* Samsung pinctrl driver data for Exynos4210 SoC. Exynos4210 SoC includes
* three gpio/pin-mux/pinconfig controllers.
*/
struct samsung_pin_ctrl exynos4210_pin_ctrl[] = {
{
/* pin-controller instance 0 data */
.pin_banks = exynos4210_pin_banks0,
.nr_banks = ARRAY_SIZE(exynos4210_pin_banks0),
.base = EXYNOS4210_GPIO_A0_START,
.nr_pins = EXYNOS4210_GPIOA_NR_PINS,
.nr_gint = EXYNOS4210_GPIOA_NR_GINT,
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.label = "exynos4210-gpio-ctrl0",
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos4210_pin_banks1,
.nr_banks = ARRAY_SIZE(exynos4210_pin_banks1),
.base = EXYNOS4210_GPIOA_NR_PINS,
.nr_pins = EXYNOS4210_GPIOB_NR_PINS,
.nr_gint = EXYNOS4210_GPIOB_NR_GINT,
.nr_wint = 32,
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.weint_con = EXYNOS_WKUP_ECON_OFFSET,
.weint_mask = EXYNOS_WKUP_EMASK_OFFSET,
.weint_pend = EXYNOS_WKUP_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.eint_wkup_init = exynos_eint_wkup_init,
.label = "exynos4210-gpio-ctrl1",
}, {
/* pin-controller instance 2 data */
.pin_banks = exynos4210_pin_banks2,
.nr_banks = ARRAY_SIZE(exynos4210_pin_banks2),
.base = EXYNOS4210_GPIOA_NR_PINS +
EXYNOS4210_GPIOB_NR_PINS,
.nr_pins = EXYNOS4210_GPIOC_NR_PINS,
.label = "exynos4210-gpio-ctrl2",
},
};

218
drivers/pinctrl/pinctrl-exynos.h Normal file
View File

@ -0,0 +1,218 @@
/*
* Exynos specific definitions for Samsung pinctrl and gpiolib driver.
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
* Copyright (c) 2012 Linaro Ltd
* http://www.linaro.org
*
* This file contains the Exynos specific definitions for the Samsung
* pinctrl/gpiolib interface drivers.
*
* Author: Thomas Abraham <thomas.ab@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#define EXYNOS_GPIO_START(__gpio) ((__gpio##_START) + (__gpio##_NR))
#define EXYNOS4210_GPIO_A0_NR (8)
#define EXYNOS4210_GPIO_A1_NR (6)
#define EXYNOS4210_GPIO_B_NR (8)
#define EXYNOS4210_GPIO_C0_NR (5)
#define EXYNOS4210_GPIO_C1_NR (5)
#define EXYNOS4210_GPIO_D0_NR (4)
#define EXYNOS4210_GPIO_D1_NR (4)
#define EXYNOS4210_GPIO_E0_NR (5)
#define EXYNOS4210_GPIO_E1_NR (8)
#define EXYNOS4210_GPIO_E2_NR (6)
#define EXYNOS4210_GPIO_E3_NR (8)
#define EXYNOS4210_GPIO_E4_NR (8)
#define EXYNOS4210_GPIO_F0_NR (8)
#define EXYNOS4210_GPIO_F1_NR (8)
#define EXYNOS4210_GPIO_F2_NR (8)
#define EXYNOS4210_GPIO_F3_NR (6)
#define EXYNOS4210_GPIO_J0_NR (8)
#define EXYNOS4210_GPIO_J1_NR (5)
#define EXYNOS4210_GPIO_K0_NR (7)
#define EXYNOS4210_GPIO_K1_NR (7)
#define EXYNOS4210_GPIO_K2_NR (7)
#define EXYNOS4210_GPIO_K3_NR (7)
#define EXYNOS4210_GPIO_L0_NR (8)
#define EXYNOS4210_GPIO_L1_NR (3)
#define EXYNOS4210_GPIO_L2_NR (8)
#define EXYNOS4210_GPIO_Y0_NR (6)
#define EXYNOS4210_GPIO_Y1_NR (4)
#define EXYNOS4210_GPIO_Y2_NR (6)
#define EXYNOS4210_GPIO_Y3_NR (8)
#define EXYNOS4210_GPIO_Y4_NR (8)
#define EXYNOS4210_GPIO_Y5_NR (8)
#define EXYNOS4210_GPIO_Y6_NR (8)
#define EXYNOS4210_GPIO_X0_NR (8)
#define EXYNOS4210_GPIO_X1_NR (8)
#define EXYNOS4210_GPIO_X2_NR (8)
#define EXYNOS4210_GPIO_X3_NR (8)
#define EXYNOS4210_GPIO_Z_NR (7)
enum exynos4210_gpio_xa_start {
EXYNOS4210_GPIO_A0_START = 0,
EXYNOS4210_GPIO_A1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_A0),
EXYNOS4210_GPIO_B_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_A1),
EXYNOS4210_GPIO_C0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_B),
EXYNOS4210_GPIO_C1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_C0),
EXYNOS4210_GPIO_D0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_C1),
EXYNOS4210_GPIO_D1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_D0),
EXYNOS4210_GPIO_E0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_D1),
EXYNOS4210_GPIO_E1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E0),
EXYNOS4210_GPIO_E2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E1),
EXYNOS4210_GPIO_E3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E2),
EXYNOS4210_GPIO_E4_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E3),
EXYNOS4210_GPIO_F0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E4),
EXYNOS4210_GPIO_F1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F0),
EXYNOS4210_GPIO_F2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F1),
EXYNOS4210_GPIO_F3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F2),
};
enum exynos4210_gpio_xb_start {
EXYNOS4210_GPIO_J0_START = 0,
EXYNOS4210_GPIO_J1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_J0),
EXYNOS4210_GPIO_K0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_J1),
EXYNOS4210_GPIO_K1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K0),
EXYNOS4210_GPIO_K2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K1),
EXYNOS4210_GPIO_K3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K2),
EXYNOS4210_GPIO_L0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K3),
EXYNOS4210_GPIO_L1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L0),
EXYNOS4210_GPIO_L2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L1),
EXYNOS4210_GPIO_Y0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2),
EXYNOS4210_GPIO_Y1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y0),
EXYNOS4210_GPIO_Y2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y1),
EXYNOS4210_GPIO_Y3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y2),
EXYNOS4210_GPIO_Y4_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y3),
EXYNOS4210_GPIO_Y5_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y4),
EXYNOS4210_GPIO_Y6_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y5),
EXYNOS4210_GPIO_X0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y6),
EXYNOS4210_GPIO_X1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X0),
EXYNOS4210_GPIO_X2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X1),
EXYNOS4210_GPIO_X3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X2),
};
enum exynos4210_gpio_xc_start {
EXYNOS4210_GPIO_Z_START = 0,
};
#define EXYNOS4210_GPIO_A0_IRQ EXYNOS4210_GPIO_A0_START
#define EXYNOS4210_GPIO_A1_IRQ EXYNOS4210_GPIO_A1_START
#define EXYNOS4210_GPIO_B_IRQ EXYNOS4210_GPIO_B_START
#define EXYNOS4210_GPIO_C0_IRQ EXYNOS4210_GPIO_C0_START
#define EXYNOS4210_GPIO_C1_IRQ EXYNOS4210_GPIO_C1_START
#define EXYNOS4210_GPIO_D0_IRQ EXYNOS4210_GPIO_D0_START
#define EXYNOS4210_GPIO_D1_IRQ EXYNOS4210_GPIO_D1_START
#define EXYNOS4210_GPIO_E0_IRQ EXYNOS4210_GPIO_E0_START
#define EXYNOS4210_GPIO_E1_IRQ EXYNOS4210_GPIO_E1_START
#define EXYNOS4210_GPIO_E2_IRQ EXYNOS4210_GPIO_E2_START
#define EXYNOS4210_GPIO_E3_IRQ EXYNOS4210_GPIO_E3_START
#define EXYNOS4210_GPIO_E4_IRQ EXYNOS4210_GPIO_E4_START
#define EXYNOS4210_GPIO_F0_IRQ EXYNOS4210_GPIO_F0_START
#define EXYNOS4210_GPIO_F1_IRQ EXYNOS4210_GPIO_F1_START
#define EXYNOS4210_GPIO_F2_IRQ EXYNOS4210_GPIO_F2_START
#define EXYNOS4210_GPIO_F3_IRQ EXYNOS4210_GPIO_F3_START
#define EXYNOS4210_GPIO_J0_IRQ EXYNOS4210_GPIO_J0_START
#define EXYNOS4210_GPIO_J1_IRQ EXYNOS4210_GPIO_J1_START
#define EXYNOS4210_GPIO_K0_IRQ EXYNOS4210_GPIO_K0_START
#define EXYNOS4210_GPIO_K1_IRQ EXYNOS4210_GPIO_K1_START
#define EXYNOS4210_GPIO_K2_IRQ EXYNOS4210_GPIO_K2_START
#define EXYNOS4210_GPIO_K3_IRQ EXYNOS4210_GPIO_K3_START
#define EXYNOS4210_GPIO_L0_IRQ EXYNOS4210_GPIO_L0_START
#define EXYNOS4210_GPIO_L1_IRQ EXYNOS4210_GPIO_L1_START
#define EXYNOS4210_GPIO_L2_IRQ EXYNOS4210_GPIO_L2_START
#define EXYNOS4210_GPIO_Z_IRQ EXYNOS4210_GPIO_Z_START
#define EXYNOS4210_GPIOA_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3)
#define EXYNOS4210_GPIOA_NR_GINT EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3)
#define EXYNOS4210_GPIOB_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_X3)
#define EXYNOS4210_GPIOB_NR_GINT EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2)
#define EXYNOS4210_GPIOC_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_Z)
/* External GPIO and wakeup interrupt related definitions */
#define EXYNOS_GPIO_ECON_OFFSET 0x700
#define EXYNOS_GPIO_EMASK_OFFSET 0x900
#define EXYNOS_GPIO_EPEND_OFFSET 0xA00
#define EXYNOS_WKUP_ECON_OFFSET 0xE00
#define EXYNOS_WKUP_EMASK_OFFSET 0xF00
#define EXYNOS_WKUP_EPEND_OFFSET 0xF40
#define EXYNOS_SVC_OFFSET 0xB08
#define EXYNOS_EINT_FUNC 0xF
/* helpers to access interrupt service register */
#define EXYNOS_SVC_GROUP_SHIFT 3
#define EXYNOS_SVC_GROUP_MASK 0x1f
#define EXYNOS_SVC_NUM_MASK 7
#define EXYNOS_SVC_GROUP(x) ((x >> EXYNOS_SVC_GROUP_SHIFT) & \
EXYNOS_SVC_GROUP_MASK)
/* Exynos specific external interrupt trigger types */
#define EXYNOS_EINT_LEVEL_LOW 0
#define EXYNOS_EINT_LEVEL_HIGH 1
#define EXYNOS_EINT_EDGE_FALLING 2
#define EXYNOS_EINT_EDGE_RISING 3
#define EXYNOS_EINT_EDGE_BOTH 4
#define EXYNOS_EINT_CON_MASK 0xF
#define EXYNOS_EINT_CON_LEN 4
#define EXYNOS_EINT_MAX_PER_BANK 8
#define EXYNOS_EINT_NR_WKUP_EINT
#define EXYNOS_PIN_BANK_EINTN(reg, __gpio, id) \
{ \
.pctl_offset = reg, \
.pin_base = (__gpio##_START), \
.nr_pins = (__gpio##_NR), \
.func_width = 4, \
.pud_width = 2, \
.drv_width = 2, \
.conpdn_width = 2, \
.pudpdn_width = 2, \
.eint_type = EINT_TYPE_NONE, \
.name = id \
}
#define EXYNOS_PIN_BANK_EINTG(reg, __gpio, id) \
{ \
.pctl_offset = reg, \
.pin_base = (__gpio##_START), \
.nr_pins = (__gpio##_NR), \
.func_width = 4, \
.pud_width = 2, \
.drv_width = 2, \
.conpdn_width = 2, \
.pudpdn_width = 2, \
.eint_type = EINT_TYPE_GPIO, \
.irq_base = (__gpio##_IRQ), \
.name = id \
}
/**
* struct exynos_geint_data: gpio eint specific data for irq_chip callbacks.
* @bank: pin bank from which this gpio interrupt originates.
* @pin: pin number within the bank.
* @eint_offset: offset to be added to the con/pend/mask register bank base.
*/
struct exynos_geint_data {
struct samsung_pin_bank *bank;
u32 pin;
u32 eint_offset;
};
/**
* struct exynos_weint_data: irq specific data for all the wakeup interrupts
* generated by the external wakeup interrupt controller.
* @domain: irq domain representing the external wakeup interrupts
* @irq: interrupt number within the domain.
*/
struct exynos_weint_data {
struct irq_domain *domain;
u32 irq;
};

888
drivers/pinctrl/pinctrl-samsung.c Normal file
View File

@ -0,0 +1,888 @@
/*
* pin-controller/pin-mux/pin-config/gpio-driver for Samsung's SoC's.
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
* Copyright (c) 2012 Linaro Ltd
* http://www.linaro.org
*
* Author: Thomas Abraham <thomas.ab@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This driver implements the Samsung pinctrl driver. It supports setting up of
* pinmux and pinconf configurations. The gpiolib interface is also included.
* External interrupt (gpio and wakeup) support are not included in this driver
* but provides extensions to which platform specific implementation of the gpio
* and wakeup interrupts can be hooked to.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include "core.h"
#include "pinctrl-samsung.h"
#define GROUP_SUFFIX "-grp"
#define GSUFFIX_LEN sizeof(GROUP_SUFFIX)
#define FUNCTION_SUFFIX "-mux"
#define FSUFFIX_LEN sizeof(FUNCTION_SUFFIX)
/* list of all possible config options supported */
struct pin_config {
char *prop_cfg;
unsigned int cfg_type;
} pcfgs[] = {
{ "samsung,pin-pud", PINCFG_TYPE_PUD },
{ "samsung,pin-drv", PINCFG_TYPE_DRV },
{ "samsung,pin-con-pdn", PINCFG_TYPE_CON_PDN },
{ "samsung,pin-pud-pdn", PINCFG_TYPE_PUD_PDN },
};
/* check if the selector is a valid pin group selector */
static int samsung_get_group_count(struct pinctrl_dev *pctldev)
{
struct samsung_pinctrl_drv_data *drvdata;
drvdata = pinctrl_dev_get_drvdata(pctldev);
return drvdata->nr_groups;
}
/* return the name of the group selected by the group selector */
static const char *samsung_get_group_name(struct pinctrl_dev *pctldev,
unsigned selector)
{
struct samsung_pinctrl_drv_data *drvdata;
drvdata = pinctrl_dev_get_drvdata(pctldev);
return drvdata->pin_groups[selector].name;
}
/* return the pin numbers associated with the specified group */
static int samsung_get_group_pins(struct pinctrl_dev *pctldev,
unsigned selector, const unsigned **pins, unsigned *num_pins)
{
struct samsung_pinctrl_drv_data *drvdata;
drvdata = pinctrl_dev_get_drvdata(pctldev);
*pins = drvdata->pin_groups[selector].pins;
*num_pins = drvdata->pin_groups[selector].num_pins;
return 0;
}
/* create pinctrl_map entries by parsing device tree nodes */
static int samsung_dt_node_to_map(struct pinctrl_dev *pctldev,
struct device_node *np, struct pinctrl_map **maps,
unsigned *nmaps)
{
struct device *dev = pctldev->dev;
struct pinctrl_map *map;
unsigned long *cfg = NULL;
char *gname, *fname;
int cfg_cnt = 0, map_cnt = 0, idx = 0;
/* count the number of config options specfied in the node */
for (idx = 0; idx < ARRAY_SIZE(pcfgs); idx++) {
if (of_find_property(np, pcfgs[idx].prop_cfg, NULL))
cfg_cnt++;
}
/*
* Find out the number of map entries to create. All the config options
* can be accomadated into a single config map entry.
*/
if (cfg_cnt)
map_cnt = 1;
if (of_find_property(np, "samsung,pin-function", NULL))
map_cnt++;
if (!map_cnt) {
dev_err(dev, "node %s does not have either config or function "
"configurations\n", np->name);
return -EINVAL;
}
/* Allocate memory for pin-map entries */
map = kzalloc(sizeof(*map) * map_cnt, GFP_KERNEL);
if (!map) {
dev_err(dev, "could not alloc memory for pin-maps\n");
return -ENOMEM;
}
*nmaps = 0;
/*
* Allocate memory for pin group name. The pin group name is derived
* from the node name from which these map entries are be created.
*/
gname = kzalloc(strlen(np->name) + GSUFFIX_LEN, GFP_KERNEL);
if (!gname) {
dev_err(dev, "failed to alloc memory for group name\n");
goto free_map;
}
sprintf(gname, "%s%s", np->name, GROUP_SUFFIX);
/*
* don't have config options? then skip over to creating function
* map entries.
*/
if (!cfg_cnt)
goto skip_cfgs;
/* Allocate memory for config entries */
cfg = kzalloc(sizeof(*cfg) * cfg_cnt, GFP_KERNEL);
if (!cfg) {
dev_err(dev, "failed to alloc memory for configs\n");
goto free_gname;
}
/* Prepare a list of config settings */
for (idx = 0, cfg_cnt = 0; idx < ARRAY_SIZE(pcfgs); idx++) {
u32 value;
if (!of_property_read_u32(np, pcfgs[idx].prop_cfg, &value))
cfg[cfg_cnt++] =
PINCFG_PACK(pcfgs[idx].cfg_type, value);
}
/* create the config map entry */
map[*nmaps].data.configs.group_or_pin = gname;
map[*nmaps].data.configs.configs = cfg;
map[*nmaps].data.configs.num_configs = cfg_cnt;
map[*nmaps].type = PIN_MAP_TYPE_CONFIGS_GROUP;
*nmaps += 1;
skip_cfgs:
/* create the function map entry */
if (of_find_property(np, "samsung,pin-function", NULL)) {
fname = kzalloc(strlen(np->name) + FSUFFIX_LEN, GFP_KERNEL);
if (!fname) {
dev_err(dev, "failed to alloc memory for func name\n");
goto free_cfg;
}
sprintf(fname, "%s%s", np->name, FUNCTION_SUFFIX);
map[*nmaps].data.mux.group = gname;
map[*nmaps].data.mux.function = fname;
map[*nmaps].type = PIN_MAP_TYPE_MUX_GROUP;
*nmaps += 1;
}
*maps = map;
return 0;
free_cfg:
kfree(cfg);
free_gname:
kfree(gname);
free_map:
kfree(map);
return -ENOMEM;
}
/* free the memory allocated to hold the pin-map table */
static void samsung_dt_free_map(struct pinctrl_dev *pctldev,
struct pinctrl_map *map, unsigned num_maps)
{
int idx;
for (idx = 0; idx < num_maps; idx++) {
if (map[idx].type == PIN_MAP_TYPE_MUX_GROUP) {
kfree(map[idx].data.mux.function);
if (!idx)
kfree(map[idx].data.mux.group);
} else if (map->type == PIN_MAP_TYPE_CONFIGS_GROUP) {
kfree(map[idx].data.configs.configs);
if (!idx)
kfree(map[idx].data.configs.group_or_pin);
}
};
kfree(map);
}
/* list of pinctrl callbacks for the pinctrl core */
static struct pinctrl_ops samsung_pctrl_ops = {
.get_groups_count = samsung_get_group_count,
.get_group_name = samsung_get_group_name,
.get_group_pins = samsung_get_group_pins,
.dt_node_to_map = samsung_dt_node_to_map,
.dt_free_map = samsung_dt_free_map,
};
/* check if the selector is a valid pin function selector */
static int samsung_get_functions_count(struct pinctrl_dev *pctldev)
{
struct samsung_pinctrl_drv_data *drvdata;
drvdata = pinctrl_dev_get_drvdata(pctldev);
return drvdata->nr_functions;
}
/* return the name of the pin function specified */
static const char *samsung_pinmux_get_fname(struct pinctrl_dev *pctldev,
unsigned selector)
{
struct samsung_pinctrl_drv_data *drvdata;
drvdata = pinctrl_dev_get_drvdata(pctldev);
return drvdata->pmx_functions[selector].name;
}
/* return the groups associated for the specified function selector */
static int samsung_pinmux_get_groups(struct pinctrl_dev *pctldev,
unsigned selector, const char * const **groups,
unsigned * const num_groups)
{
struct samsung_pinctrl_drv_data *drvdata;
drvdata = pinctrl_dev_get_drvdata(pctldev);
*groups = drvdata->pmx_functions[selector].groups;
*num_groups = drvdata->pmx_functions[selector].num_groups;
return 0;
}
/*
* given a pin number that is local to a pin controller, find out the pin bank
* and the register base of the pin bank.
*/
static void pin_to_reg_bank(struct gpio_chip *gc, unsigned pin,
void __iomem **reg, u32 *offset,
struct samsung_pin_bank **bank)
{
struct samsung_pinctrl_drv_data *drvdata;
struct samsung_pin_bank *b;
drvdata = dev_get_drvdata(gc->dev);
b = drvdata->ctrl->pin_banks;
while ((pin >= b->pin_base) &&
((b->pin_base + b->nr_pins - 1) < pin))
b++;
*reg = drvdata->virt_base + b->pctl_offset;
*offset = pin - b->pin_base;
if (bank)
*bank = b;
/* some banks have two config registers in a single bank */
if (*offset * b->func_width > BITS_PER_LONG)
*reg += 4;
}
/* enable or disable a pinmux function */
static void samsung_pinmux_setup(struct pinctrl_dev *pctldev, unsigned selector,
unsigned group, bool enable)
{
struct samsung_pinctrl_drv_data *drvdata;
const unsigned int *pins;
struct samsung_pin_bank *bank;
void __iomem *reg;
u32 mask, shift, data, pin_offset, cnt;
drvdata = pinctrl_dev_get_drvdata(pctldev);
pins = drvdata->pin_groups[group].pins;
/*
* for each pin in the pin group selected, program the correspoding pin
* pin function number in the config register.
*/
for (cnt = 0; cnt < drvdata->pin_groups[group].num_pins; cnt++) {
pin_to_reg_bank(drvdata->gc, pins[cnt] - drvdata->ctrl->base,
&reg, &pin_offset, &bank);
mask = (1 << bank->func_width) - 1;
shift = pin_offset * bank->func_width;
data = readl(reg);
data &= ~(mask << shift);
if (enable)
data |= drvdata->pin_groups[group].func << shift;
writel(data, reg);
}
}
/* enable a specified pinmux by writing to registers */
static int samsung_pinmux_enable(struct pinctrl_dev *pctldev, unsigned selector,
unsigned group)
{
samsung_pinmux_setup(pctldev, selector, group, true);
return 0;
}
/* disable a specified pinmux by writing to registers */
static void samsung_pinmux_disable(struct pinctrl_dev *pctldev,
unsigned selector, unsigned group)
{
samsung_pinmux_setup(pctldev, selector, group, false);
}
/*
* The calls to gpio_direction_output() and gpio_direction_input()
* leads to this function call (via the pinctrl_gpio_direction_{input|output}()
* function called from the gpiolib interface).
*/
static int samsung_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range, unsigned offset, bool input)
{
struct samsung_pin_bank *bank;
void __iomem *reg;
u32 data, pin_offset, mask, shift;
pin_to_reg_bank(range->gc, offset, &reg, &pin_offset, &bank);
mask = (1 << bank->func_width) - 1;
shift = pin_offset * bank->func_width;
data = readl(reg);
data &= ~(mask << shift);
if (!input)
data |= FUNC_OUTPUT << shift;
writel(data, reg);
return 0;
}
/* list of pinmux callbacks for the pinmux vertical in pinctrl core */
static struct pinmux_ops samsung_pinmux_ops = {
.get_functions_count = samsung_get_functions_count,
.get_function_name = samsung_pinmux_get_fname,
.get_function_groups = samsung_pinmux_get_groups,
.enable = samsung_pinmux_enable,
.disable = samsung_pinmux_disable,
.gpio_set_direction = samsung_pinmux_gpio_set_direction,
};
/* set or get the pin config settings for a specified pin */
static int samsung_pinconf_rw(struct pinctrl_dev *pctldev, unsigned int pin,
unsigned long *config, bool set)
{
struct samsung_pinctrl_drv_data *drvdata;
struct samsung_pin_bank *bank;
void __iomem *reg_base;
enum pincfg_type cfg_type = PINCFG_UNPACK_TYPE(*config);
u32 data, width, pin_offset, mask, shift;
u32 cfg_value, cfg_reg;
drvdata = pinctrl_dev_get_drvdata(pctldev);
pin_to_reg_bank(drvdata->gc, pin - drvdata->ctrl->base, &reg_base,
&pin_offset, &bank);
switch (cfg_type) {
case PINCFG_TYPE_PUD:
width = bank->pud_width;
cfg_reg = PUD_REG;
break;
case PINCFG_TYPE_DRV:
width = bank->drv_width;
cfg_reg = DRV_REG;
break;
case PINCFG_TYPE_CON_PDN:
width = bank->conpdn_width;
cfg_reg = CONPDN_REG;
break;
case PINCFG_TYPE_PUD_PDN:
width = bank->pudpdn_width;
cfg_reg = PUDPDN_REG;
break;
default:
WARN_ON(1);
return -EINVAL;
}
mask = (1 << width) - 1;
shift = pin_offset * width;
data = readl(reg_base + cfg_reg);
if (set) {
cfg_value = PINCFG_UNPACK_VALUE(*config);
data &= ~(mask << shift);
data |= (cfg_value << shift);
writel(data, reg_base + cfg_reg);
} else {
data >>= shift;
data &= mask;
*config = PINCFG_PACK(cfg_type, data);
}
return 0;
}
/* set the pin config settings for a specified pin */
static int samsung_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
unsigned long config)
{
return samsung_pinconf_rw(pctldev, pin, &config, true);
}
/* get the pin config settings for a specified pin */
static int samsung_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
unsigned long *config)
{
return samsung_pinconf_rw(pctldev, pin, config, false);
}
/* set the pin config settings for a specified pin group */
static int samsung_pinconf_group_set(struct pinctrl_dev *pctldev,
unsigned group, unsigned long config)
{
struct samsung_pinctrl_drv_data *drvdata;
const unsigned int *pins;
unsigned int cnt;
drvdata = pinctrl_dev_get_drvdata(pctldev);
pins = drvdata->pin_groups[group].pins;
for (cnt = 0; cnt < drvdata->pin_groups[group].num_pins; cnt++)
samsung_pinconf_set(pctldev, pins[cnt], config);
return 0;
}
/* get the pin config settings for a specified pin group */
static int samsung_pinconf_group_get(struct pinctrl_dev *pctldev,
unsigned int group, unsigned long *config)
{
struct samsung_pinctrl_drv_data *drvdata;
const unsigned int *pins;
drvdata = pinctrl_dev_get_drvdata(pctldev);
pins = drvdata->pin_groups[group].pins;
samsung_pinconf_get(pctldev, pins[0], config);
return 0;
}
/* list of pinconfig callbacks for pinconfig vertical in the pinctrl code */
static struct pinconf_ops samsung_pinconf_ops = {
.pin_config_get = samsung_pinconf_get,
.pin_config_set = samsung_pinconf_set,
.pin_config_group_get = samsung_pinconf_group_get,
.pin_config_group_set = samsung_pinconf_group_set,
};
/* gpiolib gpio_set callback function */
static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
{
void __iomem *reg;
u32 pin_offset, data;
pin_to_reg_bank(gc, offset, &reg, &pin_offset, NULL);
data = readl(reg + DAT_REG);
data &= ~(1 << pin_offset);
if (value)
data |= 1 << pin_offset;
writel(data, reg + DAT_REG);
}
/* gpiolib gpio_get callback function */
static int samsung_gpio_get(struct gpio_chip *gc, unsigned offset)
{
void __iomem *reg;
u32 pin_offset, data;
pin_to_reg_bank(gc, offset, &reg, &pin_offset, NULL);
data = readl(reg + DAT_REG);
data >>= pin_offset;
data &= 1;
return data;
}
/*
* gpiolib gpio_direction_input callback function. The setting of the pin
* mux function as 'gpio input' will be handled by the pinctrl susbsystem
* interface.
*/
static int samsung_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
{
return pinctrl_gpio_direction_input(gc->base + offset);
}
/*
* gpiolib gpio_direction_output callback function. The setting of the pin
* mux function as 'gpio output' will be handled by the pinctrl susbsystem
* interface.
*/
static int samsung_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
int value)
{
samsung_gpio_set(gc, offset, value);
return pinctrl_gpio_direction_output(gc->base + offset);
}
/*
* Parse the pin names listed in the 'samsung,pins' property and convert it
* into a list of gpio numbers are create a pin group from it.
*/
static int __init samsung_pinctrl_parse_dt_pins(struct platform_device *pdev,
struct device_node *cfg_np, struct pinctrl_desc *pctl,
unsigned int **pin_list, unsigned int *npins)
{
struct device *dev = &pdev->dev;
struct property *prop;
struct pinctrl_pin_desc const *pdesc = pctl->pins;
unsigned int idx = 0, cnt;
const char *pin_name;
*npins = of_property_count_strings(cfg_np, "samsung,pins");
if (*npins < 0) {
dev_err(dev, "invalid pin list in %s node", cfg_np->name);
return -EINVAL;
}
*pin_list = devm_kzalloc(dev, *npins * sizeof(**pin_list), GFP_KERNEL);
if (!*pin_list) {
dev_err(dev, "failed to allocate memory for pin list\n");
return -ENOMEM;
}
of_property_for_each_string(cfg_np, "samsung,pins", prop, pin_name) {
for (cnt = 0; cnt < pctl->npins; cnt++) {
if (pdesc[cnt].name) {
if (!strcmp(pin_name, pdesc[cnt].name)) {
(*pin_list)[idx++] = pdesc[cnt].number;
break;
}
}
}
if (cnt == pctl->npins) {
dev_err(dev, "pin %s not valid in %s node\n",
pin_name, cfg_np->name);
devm_kfree(dev, *pin_list);
return -EINVAL;
}
}
return 0;
}
/*
* Parse the information about all the available pin groups and pin functions
* from device node of the pin-controller. A pin group is formed with all
* the pins listed in the "samsung,pins" property.
*/
static int __init samsung_pinctrl_parse_dt(struct platform_device *pdev,
struct samsung_pinctrl_drv_data *drvdata)
{
struct device *dev = &pdev->dev;
struct device_node *dev_np = dev->of_node;
struct device_node *cfg_np;
struct samsung_pin_group *groups, *grp;
struct samsung_pmx_func *functions, *func;
unsigned *pin_list;
unsigned int npins, grp_cnt, func_idx = 0;
char *gname, *fname;
int ret;
grp_cnt = of_get_child_count(dev_np);
if (!grp_cnt)
return -EINVAL;
groups = devm_kzalloc(dev, grp_cnt * sizeof(*groups), GFP_KERNEL);
if (!groups) {
dev_err(dev, "failed allocate memory for ping group list\n");
return -EINVAL;
}
grp = groups;
functions = devm_kzalloc(dev, grp_cnt * sizeof(*functions), GFP_KERNEL);
if (!functions) {
dev_err(dev, "failed to allocate memory for function list\n");
return -EINVAL;
}
func = functions;
/*
* Iterate over all the child nodes of the pin controller node
* and create pin groups and pin function lists.
*/
for_each_child_of_node(dev_np, cfg_np) {
u32 function;
if (of_find_property(cfg_np, "interrupt-controller", NULL))
continue;
ret = samsung_pinctrl_parse_dt_pins(pdev, cfg_np,
&drvdata->pctl, &pin_list, &npins);
if (ret)
return ret;
/* derive pin group name from the node name */
gname = devm_kzalloc(dev, strlen(cfg_np->name) + GSUFFIX_LEN,
GFP_KERNEL);
if (!gname) {
dev_err(dev, "failed to alloc memory for group name\n");
return -ENOMEM;
}
sprintf(gname, "%s%s", cfg_np->name, GROUP_SUFFIX);
grp->name = gname;
grp->pins = pin_list;
grp->num_pins = npins;
of_property_read_u32(cfg_np, "samsung,pin-function", &function);
grp->func = function;
grp++;
if (!of_find_property(cfg_np, "samsung,pin-function", NULL))
continue;
/* derive function name from the node name */
fname = devm_kzalloc(dev, strlen(cfg_np->name) + FSUFFIX_LEN,
GFP_KERNEL);
if (!fname) {
dev_err(dev, "failed to alloc memory for func name\n");
return -ENOMEM;
}
sprintf(fname, "%s%s", cfg_np->name, FUNCTION_SUFFIX);
func->name = fname;
func->groups = devm_kzalloc(dev, sizeof(char *), GFP_KERNEL);
if (!func->groups) {
dev_err(dev, "failed to alloc memory for group list "
"in pin function");
return -ENOMEM;
}
func->groups[0] = gname;
func->num_groups = 1;
func++;
func_idx++;
}
drvdata->pin_groups = groups;
drvdata->nr_groups = grp_cnt;
drvdata->pmx_functions = functions;
drvdata->nr_functions = func_idx;
return 0;
}
/* register the pinctrl interface with the pinctrl subsystem */
static int __init samsung_pinctrl_register(struct platform_device *pdev,
struct samsung_pinctrl_drv_data *drvdata)
{
struct pinctrl_desc *ctrldesc = &drvdata->pctl;
struct pinctrl_pin_desc *pindesc, *pdesc;
struct samsung_pin_bank *pin_bank;
char *pin_names;
int pin, bank, ret;
ctrldesc->name = "samsung-pinctrl";
ctrldesc->owner = THIS_MODULE;
ctrldesc->pctlops = &samsung_pctrl_ops;
ctrldesc->pmxops = &samsung_pinmux_ops;
ctrldesc->confops = &samsung_pinconf_ops;
pindesc = devm_kzalloc(&pdev->dev, sizeof(*pindesc) *
drvdata->ctrl->nr_pins, GFP_KERNEL);
if (!pindesc) {
dev_err(&pdev->dev, "mem alloc for pin descriptors failed\n");
return -ENOMEM;
}
ctrldesc->pins = pindesc;
ctrldesc->npins = drvdata->ctrl->nr_pins;
ctrldesc->npins = drvdata->ctrl->nr_pins;
/* dynamically populate the pin number and pin name for pindesc */
for (pin = 0, pdesc = pindesc; pin < ctrldesc->npins; pin++, pdesc++)
pdesc->number = pin + drvdata->ctrl->base;
/*
* allocate space for storing the dynamically generated names for all
* the pins which belong to this pin-controller.
*/
pin_names = devm_kzalloc(&pdev->dev, sizeof(char) * PIN_NAME_LENGTH *
drvdata->ctrl->nr_pins, GFP_KERNEL);
if (!pin_names) {
dev_err(&pdev->dev, "mem alloc for pin names failed\n");
return -ENOMEM;
}
/* for each pin, the name of the pin is pin-bank name + pin number */
for (bank = 0; bank < drvdata->ctrl->nr_banks; bank++) {
pin_bank = &drvdata->ctrl->pin_banks[bank];
for (pin = 0; pin < pin_bank->nr_pins; pin++) {
sprintf(pin_names, "%s-%d", pin_bank->name, pin);
pdesc = pindesc + pin_bank->pin_base + pin;
pdesc->name = pin_names;
pin_names += PIN_NAME_LENGTH;
}
}
drvdata->pctl_dev = pinctrl_register(ctrldesc, &pdev->dev, drvdata);
if (!drvdata->pctl_dev) {
dev_err(&pdev->dev, "could not register pinctrl driver\n");
return -EINVAL;
}
drvdata->grange.name = "samsung-pctrl-gpio-range";
drvdata->grange.id = 0;
drvdata->grange.base = drvdata->ctrl->base;
drvdata->grange.npins = drvdata->ctrl->nr_pins;
drvdata->grange.gc = drvdata->gc;
pinctrl_add_gpio_range(drvdata->pctl_dev, &drvdata->grange);
ret = samsung_pinctrl_parse_dt(pdev, drvdata);
if (ret) {
pinctrl_unregister(drvdata->pctl_dev);
return ret;
}
return 0;
}
/* register the gpiolib interface with the gpiolib subsystem */
static int __init samsung_gpiolib_register(struct platform_device *pdev,
struct samsung_pinctrl_drv_data *drvdata)
{
struct gpio_chip *gc;
int ret;
gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
if (!gc) {
dev_err(&pdev->dev, "mem alloc for gpio_chip failed\n");
return -ENOMEM;
}
drvdata->gc = gc;
gc->base = drvdata->ctrl->base;
gc->ngpio = drvdata->ctrl->nr_pins;
gc->dev = &pdev->dev;
gc->set = samsung_gpio_set;
gc->get = samsung_gpio_get;
gc->direction_input = samsung_gpio_direction_input;
gc->direction_output = samsung_gpio_direction_output;
gc->label = drvdata->ctrl->label;
gc->owner = THIS_MODULE;
ret = gpiochip_add(gc);
if (ret) {
dev_err(&pdev->dev, "failed to register gpio_chip %s, error "
"code: %d\n", gc->label, ret);
return ret;
}
return 0;
}
/* unregister the gpiolib interface with the gpiolib subsystem */
static int __init samsung_gpiolib_unregister(struct platform_device *pdev,
struct samsung_pinctrl_drv_data *drvdata)
{
int ret = gpiochip_remove(drvdata->gc);
if (ret) {
dev_err(&pdev->dev, "gpio chip remove failed\n");
return ret;
}
return 0;
}
static const struct of_device_id samsung_pinctrl_dt_match[];
/* retrieve the soc specific data */
static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data(
struct platform_device *pdev)
{
int id;
const struct of_device_id *match;
const struct device_node *node = pdev->dev.of_node;
id = of_alias_get_id(pdev->dev.of_node, "pinctrl");
if (id < 0) {
dev_err(&pdev->dev, "failed to get alias id\n");
return NULL;
}
match = of_match_node(samsung_pinctrl_dt_match, node);
return (struct samsung_pin_ctrl *)match->data + id;
}
static int __devinit samsung_pinctrl_probe(struct platform_device *pdev)
{
struct samsung_pinctrl_drv_data *drvdata;
struct device *dev = &pdev->dev;
struct samsung_pin_ctrl *ctrl;
struct resource *res;
int ret;
if (!dev->of_node) {
dev_err(dev, "device tree node not found\n");
return -ENODEV;
}
ctrl = samsung_pinctrl_get_soc_data(pdev);
if (!ctrl) {
dev_err(&pdev->dev, "driver data not available\n");
return -EINVAL;
}
drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
if (!drvdata) {
dev_err(dev, "failed to allocate memory for driver's "
"private data\n");
return -ENOMEM;
}
drvdata->ctrl = ctrl;
drvdata->dev = dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "cannot find IO resource\n");
return -ENOENT;
}
drvdata->virt_base = devm_request_and_ioremap(&pdev->dev, res);
if (!drvdata->virt_base) {
dev_err(dev, "ioremap failed\n");
return -ENODEV;
}
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (res)
drvdata->irq = res->start;
ret = samsung_gpiolib_register(pdev, drvdata);
if (ret)
return ret;
ret = samsung_pinctrl_register(pdev, drvdata);
if (ret) {
samsung_gpiolib_unregister(pdev, drvdata);
return ret;
}
if (ctrl->eint_gpio_init)
ctrl->eint_gpio_init(drvdata);
if (ctrl->eint_wkup_init)
ctrl->eint_wkup_init(drvdata);
platform_set_drvdata(pdev, drvdata);
return 0;
}
static const struct of_device_id samsung_pinctrl_dt_match[] = {
{ .compatible = "samsung,pinctrl-exynos4210",
.data = (void *)exynos4210_pin_ctrl },
{},
};
MODULE_DEVICE_TABLE(of, samsung_pinctrl_dt_match);
static struct platform_driver samsung_pinctrl_driver = {
.probe = samsung_pinctrl_probe,
.driver = {
.name = "samsung-pinctrl",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(samsung_pinctrl_dt_match),
},
};
static int __init samsung_pinctrl_drv_register(void)
{
return platform_driver_register(&samsung_pinctrl_driver);
}
postcore_initcall(samsung_pinctrl_drv_register);
static void __exit samsung_pinctrl_drv_unregister(void)
{
platform_driver_unregister(&samsung_pinctrl_driver);
}
module_exit(samsung_pinctrl_drv_unregister);
MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
MODULE_DESCRIPTION("Samsung pinctrl driver");
MODULE_LICENSE("GPL v2");

239
drivers/pinctrl/pinctrl-samsung.h Normal file
View File

@ -0,0 +1,239 @@
/*
* pin-controller/pin-mux/pin-config/gpio-driver for Samsung's SoC's.
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
* Copyright (c) 2012 Linaro Ltd
* http://www.linaro.org
*
* Author: Thomas Abraham <thomas.ab@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __PINCTRL_SAMSUNG_H
#define __PINCTRL_SAMSUNG_H
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/machine.h>
/* register offsets within a pin bank */
#define DAT_REG 0x4
#define PUD_REG 0x8
#define DRV_REG 0xC
#define CONPDN_REG 0x10
#define PUDPDN_REG 0x14
/* pinmux function number for pin as gpio output line */
#define FUNC_OUTPUT 0x1
/**
* enum pincfg_type - possible pin configuration types supported.
* @PINCFG_TYPE_PUD: Pull up/down configuration.
* @PINCFG_TYPE_DRV: Drive strength configuration.
* @PINCFG_TYPE_CON_PDN: Pin function in power down mode.
* @PINCFG_TYPE_PUD_PDN: Pull up/down configuration in power down mode.
*/
enum pincfg_type {
PINCFG_TYPE_PUD,
PINCFG_TYPE_DRV,
PINCFG_TYPE_CON_PDN,
PINCFG_TYPE_PUD_PDN,
};
/*
* pin configuration (pull up/down and drive strength) type and its value are
* packed together into a 16-bits. The upper 8-bits represent the configuration
* type and the lower 8-bits hold the value of the configuration type.
*/
#define PINCFG_TYPE_MASK 0xFF
#define PINCFG_VALUE_SHIFT 8
#define PINCFG_VALUE_MASK (0xFF << PINCFG_VALUE_SHIFT)
#define PINCFG_PACK(type, value) (((value) << PINCFG_VALUE_SHIFT) | type)
#define PINCFG_UNPACK_TYPE(cfg) ((cfg) & PINCFG_TYPE_MASK)
#define PINCFG_UNPACK_VALUE(cfg) (((cfg) & PINCFG_VALUE_MASK) >> \
PINCFG_VALUE_SHIFT)
/**
* enum eint_type - possible external interrupt types.
* @EINT_TYPE_NONE: bank does not support external interrupts
* @EINT_TYPE_GPIO: bank supportes external gpio interrupts
* @EINT_TYPE_WKUP: bank supportes external wakeup interrupts
*
* Samsung GPIO controller groups all the available pins into banks. The pins
* in a pin bank can support external gpio interrupts or external wakeup
* interrupts or no interrupts at all. From a software perspective, the only
* difference between external gpio and external wakeup interrupts is that
* the wakeup interrupts can additionally wakeup the system if it is in
* suspended state.
*/
enum eint_type {
EINT_TYPE_NONE,
EINT_TYPE_GPIO,
EINT_TYPE_WKUP,
};
/* maximum length of a pin in pin descriptor (example: "gpa0-0") */
#define PIN_NAME_LENGTH 10
#define PIN_GROUP(n, p, f) \
{ \
.name = n, \
.pins = p, \
.num_pins = ARRAY_SIZE(p), \
.func = f \
}
#define PMX_FUNC(n, g) \
{ \
.name = n, \
.groups = g, \
.num_groups = ARRAY_SIZE(g), \
}
struct samsung_pinctrl_drv_data;
/**
* struct samsung_pin_bank: represent a controller pin-bank.
* @reg_offset: starting offset of the pin-bank registers.
* @pin_base: starting pin number of the bank.
* @nr_pins: number of pins included in this bank.
* @func_width: width of the function selector bit field.
* @pud_width: width of the pin pull up/down selector bit field.
* @drv_width: width of the pin driver strength selector bit field.
* @conpdn_width: width of the sleep mode function selector bin field.
* @pudpdn_width: width of the sleep mode pull up/down selector bit field.
* @eint_type: type of the external interrupt supported by the bank.
* @irq_base: starting controller local irq number of the bank.
* @name: name to be prefixed for each pin in this pin bank.
*/
struct samsung_pin_bank {
u32 pctl_offset;
u32 pin_base;
u8 nr_pins;
u8 func_width;
u8 pud_width;
u8 drv_width;
u8 conpdn_width;
u8 pudpdn_width;
enum eint_type eint_type;
u32 irq_base;
char *name;
};
/**
* struct samsung_pin_ctrl: represent a pin controller.
* @pin_banks: list of pin banks included in this controller.
* @nr_banks: number of pin banks.
* @base: starting system wide pin number.
* @nr_pins: number of pins supported by the controller.
* @nr_gint: number of external gpio interrupts supported.
* @nr_wint: number of external wakeup interrupts supported.
* @geint_con: offset of the ext-gpio controller registers.
* @geint_mask: offset of the ext-gpio interrupt mask registers.
* @geint_pend: offset of the ext-gpio interrupt pending registers.
* @weint_con: offset of the ext-wakeup controller registers.
* @weint_mask: offset of the ext-wakeup interrupt mask registers.
* @weint_pend: offset of the ext-wakeup interrupt pending registers.
* @svc: offset of the interrupt service register.
* @eint_gpio_init: platform specific callback to setup the external gpio
* interrupts for the controller.
* @eint_wkup_init: platform specific callback to setup the external wakeup
* interrupts for the controller.
* @label: for debug information.
*/
struct samsung_pin_ctrl {
struct samsung_pin_bank *pin_banks;
u32 nr_banks;
u32 base;
u32 nr_pins;
u32 nr_gint;
u32 nr_wint;
u32 geint_con;
u32 geint_mask;
u32 geint_pend;
u32 weint_con;
u32 weint_mask;
u32 weint_pend;
u32 svc;
int (*eint_gpio_init)(struct samsung_pinctrl_drv_data *);
int (*eint_wkup_init)(struct samsung_pinctrl_drv_data *);
char *label;
};
/**
* struct samsung_pinctrl_drv_data: wrapper for holding driver data together.
* @virt_base: register base address of the controller.
* @dev: device instance representing the controller.
* @irq: interrpt number used by the controller to notify gpio interrupts.
* @ctrl: pin controller instance managed by the driver.
* @pctl: pin controller descriptor registered with the pinctrl subsystem.
* @pctl_dev: cookie representing pinctrl device instance.
* @pin_groups: list of pin groups available to the driver.
* @nr_groups: number of such pin groups.
* @pmx_functions: list of pin functions available to the driver.
* @nr_function: number of such pin functions.
* @gc: gpio_chip instance registered with gpiolib.
* @grange: linux gpio pin range supported by this controller.
*/
struct samsung_pinctrl_drv_data {
void __iomem *virt_base;
struct device *dev;
int irq;
struct samsung_pin_ctrl *ctrl;
struct pinctrl_desc pctl;
struct pinctrl_dev *pctl_dev;
const struct samsung_pin_group *pin_groups;
unsigned int nr_groups;
const struct samsung_pmx_func *pmx_functions;
unsigned int nr_functions;
struct irq_domain *gpio_irqd;
struct irq_domain *wkup_irqd;
struct gpio_chip *gc;
struct pinctrl_gpio_range grange;
};
/**
* struct samsung_pin_group: represent group of pins of a pinmux function.
* @name: name of the pin group, used to lookup the group.
* @pins: the pins included in this group.
* @num_pins: number of pins included in this group.
* @func: the function number to be programmed when selected.
*/
struct samsung_pin_group {
const char *name;
const unsigned int *pins;
u8 num_pins;
u8 func;
};
/**
* struct samsung_pmx_func: represent a pin function.
* @name: name of the pin function, used to lookup the function.
* @groups: one or more names of pin groups that provide this function.
* @num_groups: number of groups included in @groups.
*/
struct samsung_pmx_func {
const char *name;
const char **groups;
u8 num_groups;
};
/* list of all exported SoC specific data */
extern struct samsung_pin_ctrl exynos4210_pin_ctrl[];
#endif /* __PINCTRL_SAMSUNG_H */