mirror of
https://github.com/torvalds/linux.git
synced 2024-12-12 14:12:51 +00:00
arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit
This is for the development kit board for the Librem 5. The current level of support yields a working console and is able to boot userspace from the network or eMMC. Additional subsystems that are active : - Both USB ports - SD card socket - WiFi usdhc - WWAN modem - GNSS - GPIO keys - LEDs - gyro - magnetometer - touchscreen - pwm - backlight - haptic motor Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Angus Ainslie (Purism)
Shawn Guo
parent
7802f88de0
commit
eb4ea0857c
@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
|
||||
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
|
||||
|
||||
806
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
Normal file
806
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
Normal file
@ -0,0 +1,806 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright 2018-2019 Purism SPC
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "dt-bindings/input/input.h"
|
||||
#include "dt-bindings/pwm/pwm.h"
|
||||
#include "dt-bindings/usb/pd.h"
|
||||
#include "imx8mq.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Purism Librem 5 devkit";
|
||||
compatible = "purism,librem5-devkit", "fsl,imx8mq";
|
||||
|
||||
backlight_dsi: backlight-dsi {
|
||||
compatible = "pwm-backlight";
|
||||
/* 200 Hz for the PAM2841 */
|
||||
pwms = <&pwm1 0 5000000>;
|
||||
brightness-levels = <0 100>;
|
||||
num-interpolated-steps = <100>;
|
||||
/* Default brightness level (index into the array defined by */
|
||||
/* the "brightness-levels" property) */
|
||||
default-brightness-level = <0>;
|
||||
power-supply = <®_22v4_p>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart1;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_gpio_keys>;
|
||||
|
||||
btn1 {
|
||||
label = "VOL_UP";
|
||||
gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
|
||||
wakeup-source;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
|
||||
btn2 {
|
||||
label = "VOL_DOWN";
|
||||
gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
|
||||
wakeup-source;
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
};
|
||||
|
||||
hp-det {
|
||||
label = "HP_DET";
|
||||
gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
|
||||
wakeup-source;
|
||||
linux,code = <KEY_HP>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_gpio_leds>;
|
||||
|
||||
led1 {
|
||||
label = "LED 1";
|
||||
gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
pmic_osc: clock-pmic {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
clock-output-names = "pmic_osc";
|
||||
};
|
||||
|
||||
reg_1v8_p: regulator-1v8-p {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "1v8_p";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <®_pwr_en>;
|
||||
};
|
||||
|
||||
reg_2v8_p: regulator-2v8-p {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "2v8_p";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
vin-supply = <®_pwr_en>;
|
||||
};
|
||||
|
||||
reg_3v3_p: regulator-3v3-p {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3v3_p";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <®_pwr_en>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
reg_5v_p: regulator-5v-p {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "5v_p";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <®_pwr_en>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
reg_22v4_p: regulator-22v4-p {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "22v4_P";
|
||||
regulator-min-microvolt = <22400000>;
|
||||
regulator-max-microvolt = <22400000>;
|
||||
vin-supply = <®_pwr_en>;
|
||||
};
|
||||
|
||||
reg_pwr_en: regulator-pwr-en {
|
||||
compatible = "regulator-fixed";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwr_en>;
|
||||
regulator-name = "PWR_EN";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
|
||||
compatible = "regulator-fixed";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc2_pwr>;
|
||||
regulator-name = "VSD_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vibrator {
|
||||
compatible = "gpio-vibrator";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_haptic>;
|
||||
enable-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
|
||||
vcc-supply = <®_3v3_p>;
|
||||
};
|
||||
|
||||
wifi_pwr_en: regulator-wifi-en {
|
||||
compatible = "regulator-fixed";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_wifi_pwr_en>;
|
||||
regulator-name = "WIFI_EN";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&clk {
|
||||
assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
|
||||
assigned-clock-rates = <786432000>, <722534400>;
|
||||
};
|
||||
|
||||
&fec1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_fec1>;
|
||||
phy-mode = "rgmii-id";
|
||||
phy-handle = <ðphy0>;
|
||||
fsl,magic-packet;
|
||||
phy-supply = <®_3v3_p>;
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ethphy0: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c1>;
|
||||
status = "okay";
|
||||
|
||||
pmic: pmic@4b {
|
||||
compatible = "rohm,bd71837";
|
||||
reg = <0x4b>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pmic>;
|
||||
clocks = <&pmic_osc>;
|
||||
clock-names = "osc";
|
||||
clock-output-names = "pmic_clk";
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <3 GPIO_ACTIVE_LOW>;
|
||||
interrupt-names = "irq";
|
||||
rohm,reset-snvs-powered;
|
||||
|
||||
regulators {
|
||||
buck1_reg: BUCK1 {
|
||||
regulator-name = "buck1";
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-boot-on;
|
||||
regulator-ramp-delay = <1250>;
|
||||
rohm,dvs-run-voltage = <900000>;
|
||||
rohm,dvs-idle-voltage = <850000>;
|
||||
rohm,dvs-suspend-voltage = <800000>;
|
||||
};
|
||||
|
||||
buck2_reg: BUCK2 {
|
||||
regulator-name = "buck2";
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-boot-on;
|
||||
regulator-ramp-delay = <1250>;
|
||||
rohm,dvs-run-voltage = <1000000>;
|
||||
rohm,dvs-idle-voltage = <900000>;
|
||||
};
|
||||
|
||||
buck3_reg: BUCK3 {
|
||||
regulator-name = "buck3";
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-boot-on;
|
||||
rohm,dvs-run-voltage = <1000000>;
|
||||
};
|
||||
|
||||
buck4_reg: BUCK4 {
|
||||
regulator-name = "buck4";
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
rohm,dvs-run-voltage = <1000000>;
|
||||
};
|
||||
|
||||
buck5_reg: BUCK5 {
|
||||
regulator-name = "buck5";
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck6_reg: BUCK6 {
|
||||
regulator-name = "buck6";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck7_reg: BUCK7 {
|
||||
regulator-name = "buck7";
|
||||
regulator-min-microvolt = <1605000>;
|
||||
regulator-max-microvolt = <1995000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck8_reg: BUCK8 {
|
||||
regulator-name = "buck8";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo1_reg: LDO1 {
|
||||
regulator-name = "ldo1";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
/* leave on for snvs power button */
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo2_reg: LDO2 {
|
||||
regulator-name = "ldo2";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-boot-on;
|
||||
/* leave on for snvs power button */
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo3_reg: LDO3 {
|
||||
regulator-name = "ldo3";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo4_reg: LDO4 {
|
||||
regulator-name = "ldo4";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo5_reg: LDO5 {
|
||||
regulator-name = "ldo5";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
ldo6_reg: LDO6 {
|
||||
regulator-name = "ldo6";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo7_reg: LDO7 {
|
||||
regulator-name = "ldo7";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
typec_ptn5100: usb_typec@52 {
|
||||
compatible = "nxp,ptn5110";
|
||||
reg = <0x52>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_typec>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
connector {
|
||||
compatible = "usb-c-connector";
|
||||
label = "USB-C";
|
||||
data-role = "dual";
|
||||
power-role = "dual";
|
||||
try-power-role = "sink";
|
||||
source-pdos = <PDO_FIXED(5000, 2000,
|
||||
PDO_FIXED_USB_COMM |
|
||||
PDO_FIXED_DUAL_ROLE |
|
||||
PDO_FIXED_DATA_SWAP )>;
|
||||
sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM |
|
||||
PDO_FIXED_DUAL_ROLE |
|
||||
PDO_FIXED_DATA_SWAP )
|
||||
PDO_VAR(5000, 12000, 2000)>;
|
||||
op-sink-microwatt = <10000000>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
usb_con_hs: endpoint {
|
||||
remote-endpoint = <&typec_hs>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
usb_con_ss: endpoint {
|
||||
remote-endpoint = <&typec_ss>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
rtc@68 {
|
||||
compatible = "microcrystal,rv4162";
|
||||
reg = <0x68>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rtc>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
|
||||
charger@6b { /* bq25896 */
|
||||
compatible = "ti,bq25890";
|
||||
reg = <0x6b>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_charger>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
||||
ti,battery-regulation-voltage = <4192000>; /* 4.192V */
|
||||
ti,charge-current = <1600000>; /* 1.6A */
|
||||
ti,termination-current = <66000>; /* 66mA */
|
||||
ti,precharge-current = <130000>; /* 130mA */
|
||||
ti,minimum-sys-voltage = <3000000>; /* 3V */
|
||||
ti,boost-voltage = <5000000>; /* 5V */
|
||||
ti,boost-max-current = <50000>; /* 50mA */
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c3>;
|
||||
status = "okay";
|
||||
|
||||
magnetometer@1e {
|
||||
compatible = "st,lsm9ds1-magn";
|
||||
reg = <0x1e>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_imu>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
|
||||
vdd-supply = <®_3v3_p>;
|
||||
vddio-supply = <®_3v3_p>;
|
||||
};
|
||||
|
||||
touchscreen@5d {
|
||||
compatible = "goodix,gt5688";
|
||||
reg = <0x5d>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ts>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
||||
reset-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
|
||||
irq-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
|
||||
touchscreen-size-x = <720>;
|
||||
touchscreen-size-y = <1440>;
|
||||
AVDD28-supply = <®_2v8_p>;
|
||||
VDDIO-supply = <®_1v8_p>;
|
||||
};
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl_bl: blgrp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_GPIO1_IO01_PWM1_OUT 0x6 /* DSI_BL_PWM */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_bt: btgrp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x16 /* nBT_DISABLE */
|
||||
MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7 0x10 /* BT_HOST_WAKE */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_charger: chargergrp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x80 /* CHRG_nINT */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_fec1: fec1grp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
|
||||
MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
|
||||
MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
|
||||
MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
|
||||
MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
|
||||
MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
|
||||
MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
|
||||
MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
|
||||
MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
|
||||
MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
|
||||
MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
|
||||
MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
|
||||
MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
|
||||
MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
|
||||
MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19
|
||||
MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x1f
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ts: tsgrp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x16 /* TOUCH INT */
|
||||
MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x19 /* TOUCH RST */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_gpio_leds: gpioledgrp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x16
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_gpio_keys: gpiokeygrp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x16
|
||||
MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22 0x16
|
||||
MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x180 /* HP_DET */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_haptic: hapticgrp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4 0xc6 /* nHAPTIC */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c1: i2c1grp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000001f
|
||||
MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000001f
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c3: i2c3grp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000001f
|
||||
MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000001f
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_imu: imugrp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x8 /* IMU_INT */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pmic: pmicgrp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x80 /* PMIC intr */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwr_en: pwrengrp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x06
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_rtc: rtcgrp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29 0x80 /* RTC intr */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_typec: typecgrp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x16
|
||||
MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x80
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart1: uart1grp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49
|
||||
MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart2: uart2grp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49
|
||||
MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49
|
||||
MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x49
|
||||
MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x49
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart3: uart3grp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49
|
||||
MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart4: uart4grp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x49
|
||||
MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x49
|
||||
MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x49
|
||||
MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x49
|
||||
MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x49
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc1: usdhc1grp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
|
||||
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3
|
||||
MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3
|
||||
MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3
|
||||
MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3
|
||||
MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3
|
||||
MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3
|
||||
MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3
|
||||
MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3
|
||||
MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3
|
||||
MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83
|
||||
MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d
|
||||
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd
|
||||
MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd
|
||||
MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd
|
||||
MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd
|
||||
MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd
|
||||
MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd
|
||||
MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd
|
||||
MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd
|
||||
MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd
|
||||
MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d
|
||||
MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f
|
||||
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf
|
||||
MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf
|
||||
MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf
|
||||
MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf
|
||||
MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf
|
||||
MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf
|
||||
MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf
|
||||
MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf
|
||||
MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf
|
||||
MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f
|
||||
MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_pwr: usdhc2grppwr {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_gpio: usdhc2grpgpio {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x80 /* WIFI_WAKE */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2: usdhc2grp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83
|
||||
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3
|
||||
MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
|
||||
MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
|
||||
MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
|
||||
MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d
|
||||
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd
|
||||
MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd
|
||||
MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd
|
||||
MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd
|
||||
MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f
|
||||
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcf
|
||||
MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcf
|
||||
MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcf
|
||||
MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcf
|
||||
MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcf
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_wdog: wdoggrp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_wifi_pwr_en: wifipwrengrp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x06
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_wwan: wwangrp {
|
||||
fsl,pins = <
|
||||
MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x09 /* nWWAN_DISABLE */
|
||||
MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x80 /* nWoWWAN */
|
||||
MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9 0x19 /* WWAN_RESET */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&pgc_gpu {
|
||||
power-supply = <&buck3_reg>;
|
||||
};
|
||||
|
||||
&pgc_vpu {
|
||||
power-supply = <&buck4_reg>;
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_bl>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
||||
&uart1 { /* console */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart3 { /* GNSS */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart4 { /* BT */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_bt>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_phy1 {
|
||||
vbus-supply = <®_5v_p>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_dwc3_0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
dr_mode = "otg";
|
||||
status = "okay";
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
typec_hs: endpoint {
|
||||
remote-endpoint = <&usb_con_hs>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
typec_ss: endpoint {
|
||||
remote-endpoint = <&usb_con_ss>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb_dwc3_1 {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc1 {
|
||||
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||||
pinctrl-0 = <&pinctrl_usdhc1>;
|
||||
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
|
||||
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc2 {
|
||||
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||||
pinctrl-0 = <&pinctrl_usdhc2>;
|
||||
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
|
||||
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <®_usdhc2_vmmc>;
|
||||
power-supply = <&wifi_pwr_en>;
|
||||
non-removable;
|
||||
disable-wp;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
wakeup-source;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdog1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_wdog>;
|
||||
fsl,ext-reset-output;
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user