mirror of
https://github.com/torvalds/linux.git
synced 2024-12-15 15:41:58 +00:00
ARM: 7033/1: mach-u300: break out GPIO driver specifics
The <mach/gpio.h> file is included from upper directories and deal with generic GPIO and gpiolib stuff. Break out the platform and driver specific defines and functions into its own header file. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Linus Walleij
Russell King
parent
0f33286190
commit
eb3cf18ccc
253
arch/arm/mach-u300/include/mach/gpio-u300.h
Normal file
253
arch/arm/mach-u300/include/mach/gpio-u300.h
Normal file
@ -0,0 +1,253 @@
|
||||
/*
|
||||
* Copyright (C) 2007-2011 ST-Ericsson AB
|
||||
* License terms: GNU General Public License (GPL) version 2
|
||||
* GPIO block resgister definitions and inline macros for
|
||||
* U300 GPIO COH 901 335 or COH 901 571/3
|
||||
* Author: Linus Walleij <linus.walleij@stericsson.com>
|
||||
*/
|
||||
|
||||
#ifndef __MACH_U300_GPIO_U300_H
|
||||
#define __MACH_U300_GPIO_U300_H
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/io.h>
|
||||
#include <mach/hardware.h>
|
||||
#include <asm/irq.h>
|
||||
|
||||
/* Switch type depending on platform/chip variant */
|
||||
#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
|
||||
#define U300_COH901335
|
||||
#endif
|
||||
#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
|
||||
#define U300_COH901571_3
|
||||
#endif
|
||||
|
||||
/* Get base address for regs here */
|
||||
#include "u300-regs.h"
|
||||
/* IRQ numbers */
|
||||
#include "irqs.h"
|
||||
|
||||
/*
|
||||
* This is the GPIO block definitions. GPIO (General Purpose I/O) can be
|
||||
* used for anything, and often is. The event/enable etc figures are for
|
||||
* the lowermost pin (pin 0 on each port), shift this left to match your
|
||||
* pin if you're gonna use these values.
|
||||
*/
|
||||
#ifdef U300_COH901335
|
||||
#define U300_GPIO_PORTX_SPACING (0x1C)
|
||||
/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
|
||||
#define U300_GPIO_PXPDIR (0x00)
|
||||
#define U300_GPIO_PXPDOR (0x00)
|
||||
/* Port X Pin Config Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXPCR (0x04)
|
||||
#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
|
||||
/* Port X Interrupt Event Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXIEV (0x08)
|
||||
#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL)
|
||||
#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL)
|
||||
/* Port X Interrupt Enable Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXIEN (0x0C)
|
||||
#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL)
|
||||
#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL)
|
||||
/* Port X Interrupt Force Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXIFR (0x10)
|
||||
#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL)
|
||||
#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL)
|
||||
/* Port X Interrupt Config Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXICR (0x14)
|
||||
#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
|
||||
#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
|
||||
#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
|
||||
#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
|
||||
/* Port X Pull-up Enable Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXPER (0x18)
|
||||
#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
|
||||
#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
|
||||
/* Control Register 32bit (R/W) */
|
||||
#define U300_GPIO_CR (0x54)
|
||||
#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE (0x00000001UL)
|
||||
/* three ports of 8 bits each = GPIO pins 0..23 */
|
||||
#define U300_GPIO_NUM_PORTS 3
|
||||
#define U300_GPIO_PINS_PER_PORT 8
|
||||
#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
|
||||
#endif
|
||||
|
||||
#ifdef U300_COH901571_3
|
||||
/*
|
||||
* Control Register 32bit (R/W)
|
||||
* bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
|
||||
* gives the number of GPIO pins.
|
||||
* bit 8-2 (mask 0x000001FC) contains the core version ID.
|
||||
*/
|
||||
#define U300_GPIO_CR (0x00)
|
||||
#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL)
|
||||
#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
|
||||
#define U300_GPIO_PORTX_SPACING (0x30)
|
||||
/* Port X Pin Data INPUT Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXPDIR (0x04)
|
||||
/* Port X Pin Data OUTPUT Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXPDOR (0x08)
|
||||
/* Port X Pin Config Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXPCR (0x0C)
|
||||
#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
|
||||
/* Port X Pull-up Enable Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXPER (0x10)
|
||||
#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
|
||||
#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
|
||||
/* Port X Interrupt Event Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXIEV (0x14)
|
||||
#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL)
|
||||
#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL)
|
||||
/* Port X Interrupt Enable Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXIEN (0x18)
|
||||
#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL)
|
||||
#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL)
|
||||
/* Port X Interrupt Force Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXIFR (0x1C)
|
||||
#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL)
|
||||
#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL)
|
||||
/* Port X Interrupt Config Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXICR (0x20)
|
||||
#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
|
||||
#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
|
||||
#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
|
||||
#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
|
||||
#ifdef CONFIG_MACH_U300_BS335
|
||||
/* seven ports of 8 bits each = GPIO pins 0..55 */
|
||||
#define U300_GPIO_NUM_PORTS 7
|
||||
#else
|
||||
/* five ports of 8 bits each = GPIO pins 0..39 */
|
||||
#define U300_GPIO_NUM_PORTS 5
|
||||
#endif
|
||||
#define U300_GPIO_PINS_PER_PORT 8
|
||||
#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Individual pin assignments for the B26/S26. Notice that the
|
||||
* actual usage of these pins depends on the PAD MUX settings, that
|
||||
* is why the same number can potentially appear several times.
|
||||
* In the reference design each pin is only used for one purpose.
|
||||
* These were determined by inspecting the B26/S26 schematic:
|
||||
* 2/1911-ROA 128 1603
|
||||
*/
|
||||
#ifdef CONFIG_MACH_U300_BS2X
|
||||
#define U300_GPIO_PIN_UART_RX 0
|
||||
#define U300_GPIO_PIN_UART_TX 1
|
||||
#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */
|
||||
#define U300_GPIO_PIN_CAM_SLEEP 4
|
||||
#define U300_GPIO_PIN_CAM_REG_EN 5
|
||||
#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */
|
||||
|
||||
#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */
|
||||
#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */
|
||||
#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */
|
||||
#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
|
||||
#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
|
||||
#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */
|
||||
#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */
|
||||
#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
|
||||
|
||||
#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Individual pin assignments for the B330/S330 and B365/S365.
|
||||
* Notice that the actual usage of these pins depends on the
|
||||
* PAD MUX settings, that is why the same number can potentially
|
||||
* appear several times. In the reference design each pin is only
|
||||
* used for one purpose. These were determined by inspecting the
|
||||
* S365 schematic.
|
||||
*/
|
||||
#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
|
||||
defined(CONFIG_MACH_U300_BS335)
|
||||
#define U300_GPIO_PIN_UART_RX 0
|
||||
#define U300_GPIO_PIN_UART_TX 1
|
||||
#define U300_GPIO_PIN_UART_CTS 2
|
||||
#define U300_GPIO_PIN_UART_RTS 3
|
||||
#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */
|
||||
#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */
|
||||
#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */
|
||||
#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */
|
||||
|
||||
#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */
|
||||
#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */
|
||||
#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */
|
||||
#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
|
||||
#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
|
||||
#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */
|
||||
#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */
|
||||
#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
|
||||
|
||||
#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */
|
||||
#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */
|
||||
#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */
|
||||
#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */
|
||||
#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
|
||||
|
||||
#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */
|
||||
|
||||
#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */
|
||||
|
||||
#ifdef CONFIG_MACH_U300_BS335
|
||||
|
||||
#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */
|
||||
|
||||
#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
#endif /* __MACH_U300_GPIO_U300_H */
|
||||
@ -13,252 +13,8 @@
|
||||
#ifndef __MACH_U300_GPIO_H
|
||||
#define __MACH_U300_GPIO_H
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/io.h>
|
||||
#include <mach/hardware.h>
|
||||
#include <asm/irq.h>
|
||||
|
||||
#define __ARM_GPIOLIB_COMPLEX
|
||||
|
||||
/* Switch type depending on platform/chip variant */
|
||||
#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
|
||||
#define U300_COH901335
|
||||
#endif
|
||||
#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
|
||||
#define U300_COH901571_3
|
||||
#endif
|
||||
|
||||
/* Get base address for regs here */
|
||||
#include "u300-regs.h"
|
||||
/* IRQ numbers */
|
||||
#include "irqs.h"
|
||||
|
||||
/*
|
||||
* This is the GPIO block definitions. GPIO (General Purpose I/O) can be
|
||||
* used for anything, and often is. The event/enable etc figures are for
|
||||
* the lowermost pin (pin 0 on each port), shift this left to match your
|
||||
* pin if you're gonna use these values.
|
||||
*/
|
||||
#ifdef U300_COH901335
|
||||
#define U300_GPIO_PORTX_SPACING (0x1C)
|
||||
/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
|
||||
#define U300_GPIO_PXPDIR (0x00)
|
||||
#define U300_GPIO_PXPDOR (0x00)
|
||||
/* Port X Pin Config Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXPCR (0x04)
|
||||
#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
|
||||
/* Port X Interrupt Event Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXIEV (0x08)
|
||||
#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL)
|
||||
#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL)
|
||||
/* Port X Interrupt Enable Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXIEN (0x0C)
|
||||
#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL)
|
||||
#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL)
|
||||
/* Port X Interrupt Force Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXIFR (0x10)
|
||||
#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL)
|
||||
#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL)
|
||||
/* Port X Interrupt Config Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXICR (0x14)
|
||||
#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
|
||||
#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
|
||||
#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
|
||||
#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
|
||||
/* Port X Pull-up Enable Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXPER (0x18)
|
||||
#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
|
||||
#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
|
||||
/* Control Register 32bit (R/W) */
|
||||
#define U300_GPIO_CR (0x54)
|
||||
#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE (0x00000001UL)
|
||||
/* three ports of 8 bits each = GPIO pins 0..23 */
|
||||
#define U300_GPIO_NUM_PORTS 3
|
||||
#define U300_GPIO_PINS_PER_PORT 8
|
||||
#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
|
||||
#endif
|
||||
|
||||
#ifdef U300_COH901571_3
|
||||
/*
|
||||
* Control Register 32bit (R/W)
|
||||
* bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
|
||||
* gives the number of GPIO pins.
|
||||
* bit 8-2 (mask 0x000001FC) contains the core version ID.
|
||||
*/
|
||||
#define U300_GPIO_CR (0x00)
|
||||
#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL)
|
||||
#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
|
||||
#define U300_GPIO_PORTX_SPACING (0x30)
|
||||
/* Port X Pin Data INPUT Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXPDIR (0x04)
|
||||
/* Port X Pin Data OUTPUT Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXPDOR (0x08)
|
||||
/* Port X Pin Config Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXPCR (0x0C)
|
||||
#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
|
||||
#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
|
||||
/* Port X Pull-up Enable Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXPER (0x10)
|
||||
#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
|
||||
#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
|
||||
/* Port X Interrupt Event Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXIEV (0x14)
|
||||
#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL)
|
||||
#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL)
|
||||
/* Port X Interrupt Enable Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXIEN (0x18)
|
||||
#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL)
|
||||
#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL)
|
||||
/* Port X Interrupt Force Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXIFR (0x1C)
|
||||
#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL)
|
||||
#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL)
|
||||
/* Port X Interrupt Config Register 32bit (R/W) */
|
||||
#define U300_GPIO_PXICR (0x20)
|
||||
#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
|
||||
#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
|
||||
#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
|
||||
#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
|
||||
#ifdef CONFIG_MACH_U300_BS335
|
||||
/* seven ports of 8 bits each = GPIO pins 0..55 */
|
||||
#define U300_GPIO_NUM_PORTS 7
|
||||
#else
|
||||
/* five ports of 8 bits each = GPIO pins 0..39 */
|
||||
#define U300_GPIO_NUM_PORTS 5
|
||||
#endif
|
||||
#define U300_GPIO_PINS_PER_PORT 8
|
||||
#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Individual pin assignments for the B26/S26. Notice that the
|
||||
* actual usage of these pins depends on the PAD MUX settings, that
|
||||
* is why the same number can potentially appear several times.
|
||||
* In the reference design each pin is only used for one purpose.
|
||||
* These were determined by inspecting the B26/S26 schematic:
|
||||
* 2/1911-ROA 128 1603
|
||||
*/
|
||||
#ifdef CONFIG_MACH_U300_BS2X
|
||||
#define U300_GPIO_PIN_UART_RX 0
|
||||
#define U300_GPIO_PIN_UART_TX 1
|
||||
#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */
|
||||
#define U300_GPIO_PIN_CAM_SLEEP 4
|
||||
#define U300_GPIO_PIN_CAM_REG_EN 5
|
||||
#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */
|
||||
|
||||
#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */
|
||||
#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */
|
||||
#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */
|
||||
#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
|
||||
#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
|
||||
#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */
|
||||
#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */
|
||||
#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
|
||||
|
||||
#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Individual pin assignments for the B330/S330 and B365/S365.
|
||||
* Notice that the actual usage of these pins depends on the
|
||||
* PAD MUX settings, that is why the same number can potentially
|
||||
* appear several times. In the reference design each pin is only
|
||||
* used for one purpose. These were determined by inspecting the
|
||||
* S365 schematic.
|
||||
*/
|
||||
#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
|
||||
defined(CONFIG_MACH_U300_BS335)
|
||||
#define U300_GPIO_PIN_UART_RX 0
|
||||
#define U300_GPIO_PIN_UART_TX 1
|
||||
#define U300_GPIO_PIN_UART_CTS 2
|
||||
#define U300_GPIO_PIN_UART_RTS 3
|
||||
#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */
|
||||
#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */
|
||||
#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */
|
||||
#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */
|
||||
|
||||
#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */
|
||||
#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */
|
||||
#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */
|
||||
#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
|
||||
#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
|
||||
#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */
|
||||
#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */
|
||||
#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
|
||||
|
||||
#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */
|
||||
#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */
|
||||
#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */
|
||||
#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */
|
||||
#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
|
||||
|
||||
#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */
|
||||
|
||||
#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */
|
||||
|
||||
#ifdef CONFIG_MACH_U300_BS335
|
||||
|
||||
#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */
|
||||
|
||||
#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */
|
||||
#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
/* translates a pin number to a port number */
|
||||
#define PIN_TO_PORT(val) (val >> 3)
|
||||
|
||||
/* These can be found in arch/arm/mach-u300/gpio.c */
|
||||
extern int gpio_is_valid(int number);
|
||||
extern int gpio_request(unsigned gpio, const char *label);
|
||||
@ -278,6 +34,9 @@ extern void gpio_set_value(unsigned gpio, int value);
|
||||
#define gpio_get_value_cansleep gpio_get_value
|
||||
#define gpio_set_value_cansleep gpio_set_value
|
||||
|
||||
/* translates a pin number to a port number */
|
||||
#define PIN_TO_PORT(val) (val >> 3)
|
||||
|
||||
/* wrappers to sleep-enable the previous two functions */
|
||||
static inline unsigned gpio_to_irq(unsigned gpio)
|
||||
{
|
||||
@ -294,4 +53,4 @@ static inline unsigned irq_to_gpio(unsigned irq)
|
||||
return (irq - IRQ_U300_GPIO_PORT0) << 3;
|
||||
}
|
||||
|
||||
#endif
|
||||
#endif /* __MACH_U300_GPIO_H */
|
||||
|
||||
@ -13,12 +13,12 @@
|
||||
#include <linux/device.h>
|
||||
#include <linux/amba/bus.h>
|
||||
#include <linux/mmc/host.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/dmaengine.h>
|
||||
#include <linux/amba/mmci.h>
|
||||
#include <linux/slab.h>
|
||||
#include <mach/coh901318.h>
|
||||
#include <mach/dma_channels.h>
|
||||
#include <mach/gpio-u300.h>
|
||||
|
||||
#include "mmc.h"
|
||||
#include "padmux.h"
|
||||
|
||||
@ -21,6 +21,7 @@
|
||||
#include <linux/err.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <mach/gpio-u300.h>
|
||||
|
||||
/* Reference to GPIO block clock */
|
||||
static struct clk *clk;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user