Linux 3.18-rc7

-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUe7l9AAoJEHm+PkMAQRiGkGcIAIryQ7NKn4IaxUtS807Lx4Ih
 obEnx7nNKZTXCZpD/7XQGHMMJyozMJR50PHZESJoHu4Luhv9h7EFRnyJ6MdqMlwn
 zla3zY0yRsHwPoJKcHbSE0CPHZz0WPQHj7IEbM+XJz2tMNJfbgTrezElmcCM4DRp
 c9ae+ggwZ2cyNYM0r2RSwSJ525WMh69f9dzSUE27fpvkllQgwqNs/jHYz8HNOEht
 FWcv5UhvzKjwJS3awULfOB3zH2QdFvVTrwAzd+kbV2Q6T6CaUoFRlhXeKUO6W2Jv
 pJM6oj8tMZUkdXEv7EQXT1kwEqC4DULTTTHs4tSF79O1ESmNfePiOwwBcwoM2nM=
 =kG1Y
 -----END PGP SIGNATURE-----

Merge tag 'v3.18-rc7' into drm-next

This fixes a bunch of conflicts prior to merging i915 tree.

Linux 3.18-rc7

Conflicts:
	drivers/gpu/drm/exynos/exynos_drm_drv.c
	drivers/gpu/drm/i915/i915_drv.c
	drivers/gpu/drm/i915/intel_pm.c
	drivers/gpu/drm/tegra/dc.c

Documentation/devicetree/bindings/ata/sata_rcar.txt

@@ -3,8 +3,10 @@
 Required properties:
 - compatible		: should contain one of the following:
 			  - "renesas,sata-r8a7779" for R-Car H1
-			  - "renesas,sata-r8a7790" for R-Car H2
+			  - "renesas,sata-r8a7790-es1" for R-Car H2 ES1
-			  - "renesas,sata-r8a7791" for R-Car M2
+			  - "renesas,sata-r8a7790" for R-Car H2 other than ES1
+			  - "renesas,sata-r8a7791" for R-Car M2-W
+			  - "renesas,sata-r8a7793" for R-Car M2-N
 - reg			: address and length of the SATA registers;
 - interrupts		: must consist of one interrupt specifier.
 

Documentation/devicetree/bindings/interrupt-controller/interrupts.txt

@@ -30,10 +30,6 @@ should only be used when a device has multiple interrupt parents.
   Example:
 	interrupts-extended = <&intc1 5 1>, <&intc2 1 0>;
 
-A device node may contain either "interrupts" or "interrupts-extended", but not
-both. If both properties are present, then the operating system should log an
-error and use only the data in "interrupts".
-
 2) Interrupt controller nodes
 -----------------------------
 

Documentation/devicetree/bindings/pci/pci.txt

@@ -7,3 +7,14 @@ And for the interrupt mapping part:
 
 Open Firmware Recommended Practice: Interrupt Mapping
 http://www.openfirmware.org/1275/practice/imap/imap0_9d.pdf
+
+Additionally to the properties specified in the above standards a host bridge
+driver implementation may support the following properties:
+
+- linux,pci-domain:
+   If present this property assigns a fixed PCI domain number to a host bridge,
+   otherwise an unstable (across boots) unique number will be assigned.
+   It is required to either not set this property at all or set it for all
+   host bridges in the system, otherwise potentially conflicting domain numbers
+   may be assigned to root buses behind different host bridges.  The domain
+   number for each host bridge in the system must be unique.

Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt

@@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-TZ1090-PDC's pin configuration nodes act as a container for an abitrary number
+TZ1090-PDC's pin configuration nodes act as a container for an arbitrary number
 of subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration

Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt

@@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-TZ1090's pin configuration nodes act as a container for an abitrary number of
+TZ1090's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration

Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt

@@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Lantiq's pin configuration nodes act as a container for an abitrary number of
+Lantiq's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those group(s), and two pin configuration parameters:

Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt

@@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Lantiq's pin configuration nodes act as a container for an abitrary number of
+Lantiq's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those group(s), and two pin configuration parameters:

Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt

@@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Tegra's pin configuration nodes act as a container for an abitrary number of
+Tegra's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration

Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt

@@ -13,7 +13,7 @@ Optional properties:
 Please refer to pinctrl-bindings.txt in this directory for details of the common
 pinctrl bindings used by client devices.
 
-SiRFprimaII's pinmux nodes act as a container for an abitrary number of subnodes.
+SiRFprimaII's pinmux nodes act as a container for an arbitrary number of subnodes.
 Each of these subnodes represents some desired configuration for a group of pins.
 
 Required subnode-properties:

Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt

@@ -32,7 +32,7 @@ Required properties:
 Please refer to pinctrl-bindings.txt in this directory for details of the common
 pinctrl bindings used by client devices.
 
-SPEAr's pinmux nodes act as a container for an abitrary number of subnodes. Each
+SPEAr's pinmux nodes act as a container for an arbitrary number of subnodes. Each
 of these subnodes represents muxing for a pin, a group, or a list of pins or
 groups.
 

Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt

@@ -18,7 +18,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Qualcomm's pin configuration nodes act as a container for an abitrary number of
+Qualcomm's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration

Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt

@@ -47,7 +47,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-The pin configuration nodes act as a container for an abitrary number of
+The pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration

Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt

@@ -18,7 +18,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Qualcomm's pin configuration nodes act as a container for an abitrary number of
+Qualcomm's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration

Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt

@@ -47,7 +47,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-The pin configuration nodes act as a container for an abitrary number of
+The pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration

Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt

@@ -18,7 +18,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Qualcomm's pin configuration nodes act as a container for an abitrary number of
+Qualcomm's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -34,6 +34,7 @@ chipidea	Chipidea, Inc
 chrp	Common Hardware Reference Platform
 chunghwa	Chunghwa Picture Tubes Ltd.
 cirrus	Cirrus Logic, Inc.
+cnm	Chips&Media, Inc.
 cortina	Cortina Systems, Inc.
 crystalfontz	Crystalfontz America, Inc.
 dallas	Maxim Integrated Products (formerly Dallas Semiconductor)
@@ -94,6 +95,7 @@ maxim	Maxim Integrated Products
 mediatek	MediaTek Inc.
 micrel	Micrel Inc.
 microchip	Microchip Technology Inc.
+micron	Micron Technology Inc.
 mitsubishi	Mitsubishi Electric Corporation
 mosaixtech	Mosaix Technologies, Inc.
 moxa	Moxa
@@ -129,6 +131,7 @@ renesas	Renesas Electronics Corporation
 ricoh	Ricoh Co. Ltd.
 rockchip	Fuzhou Rockchip Electronics Co., Ltd
 samsung	Samsung Semiconductor
+sandisk	Sandisk Corporation
 sbs	Smart Battery System
 schindler	Schindler
 seagate	Seagate Technology PLC
@@ -140,7 +143,7 @@ silergy	Silergy Corp.
 sirf	SiRF Technology, Inc.
 sitronix	Sitronix Technology Corporation
 smsc	Standard Microsystems Corporation
-snps 	Synopsys, Inc.
+snps	Synopsys, Inc.
 solidrun	SolidRun
 sony	Sony Corporation
 spansion	Spansion Inc.

Documentation/filesystems/overlayfs.txt

@@ -64,7 +64,7 @@ is formed.
 At mount time, the two directories given as mount options "lowerdir" and
 "upperdir" are combined into a merged directory:
 
-  mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper,\
+  mount -t overlay overlay -olowerdir=/lower,upperdir=/upper,\
 workdir=/work /merged
 
 The "workdir" needs to be an empty directory on the same filesystem

Documentation/input/elantech.txt

@@ -38,22 +38,38 @@ Contents
         7.2.1 Status packet
         7.2.2 Head packet
         7.2.3 Motion packet
+ 8. Trackpoint (for Hardware version 3 and 4)
+    8.1 Registers
+    8.2 Native relative mode 6 byte packet format
+        8.2.1 Status Packet
 
 
 
 1. Introduction
    ~~~~~~~~~~~~
 
-Currently the Linux Elantech touchpad driver is aware of two different
+Currently the Linux Elantech touchpad driver is aware of four different
-hardware versions unimaginatively called version 1 and version 2. Version 1
+hardware versions unimaginatively called version 1,version 2, version 3
-is found in "older" laptops and uses 4 bytes per packet. Version 2 seems to
+and version 4. Version 1 is found in "older" laptops and uses 4 bytes per
-be introduced with the EeePC and uses 6 bytes per packet, and provides
+packet. Version 2 seems to be introduced with the EeePC and uses 6 bytes
-additional features such as position of two fingers, and width of the touch.
+per packet, and provides additional features such as position of two fingers,
+and width of the touch.  Hardware version 3 uses 6 bytes per packet (and
+for 2 fingers the concatenation of two 6 bytes packets) and allows tracking
+of up to 3 fingers. Hardware version 4 uses 6 bytes per packet, and can
+combine a status packet with multiple head or motion packets. Hardware version
+4 allows tracking up to 5 fingers.
+
+Some Hardware version 3 and version 4 also have a trackpoint which uses a
+separate packet format. It is also 6 bytes per packet.
 
 The driver tries to support both hardware versions and should be compatible
 with the Xorg Synaptics touchpad driver and its graphical configuration
 utilities.
 
+Note that a mouse button is also associated with either the touchpad or the
+trackpoint when a trackpoint is available.  Disabling the Touchpad in xorg
+(TouchPadOff=0) will also disable the buttons associated with the touchpad.
+
 Additionally the operation of the touchpad can be altered by adjusting the
 contents of some of its internal registers. These registers are represented
 by the driver as sysfs entries under /sys/bus/serio/drivers/psmouse/serio?
@@ -78,7 +94,7 @@ completeness sake.
 2. Extra knobs
    ~~~~~~~~~~~
 
-Currently the Linux Elantech touchpad driver provides two extra knobs under
+Currently the Linux Elantech touchpad driver provides three extra knobs under
 /sys/bus/serio/drivers/psmouse/serio? for the user.
 
 * debug
@@ -112,6 +128,20 @@ Currently the Linux Elantech touchpad driver provides two extra knobs under
    data consistency checking can be done. For now checking is disabled by
    default. Currently even turning it on will do nothing.
 
+* crc_enabled
+
+   Sets crc_enabled to 0/1. The name "crc_enabled" is the official name of
+   this integrity check, even though it is not an actual cyclic redundancy
+   check.
+
+   Depending on the state of crc_enabled, certain basic data integrity
+   verification is done by the driver on hardware version 3 and 4. The
+   driver will reject any packet that appears corrupted. Using this knob,
+   The state of crc_enabled can be altered with this knob.
+
+   Reading the crc_enabled value will show the active value. Echoing
+   "0" or "1" to this file will set the state to "0" or "1".
+
 /////////////////////////////////////////////////////////////////////////////
 
 3. Differentiating hardware versions
@@ -746,3 +776,42 @@ byte 5:
 
         byte 0 ~ 2 for one finger
         byte 3 ~ 5 for another
+
+
+8. Trackpoint (for Hardware version 3 and 4)
+   =========================================
+8.1 Registers
+    ~~~~~~~~~
+No special registers have been identified.
+
+8.2 Native relative mode 6 byte packet format
+    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+8.2.1 Status Packet
+      ~~~~~~~~~~~~~
+
+byte 0:
+   bit   7   6   5   4   3   2   1   0
+         0   0  sx  sy   0   M   R   L
+byte 1:
+   bit   7   6   5   4   3   2   1   0
+       ~sx   0   0   0   0   0   0   0
+byte 2:
+   bit   7   6   5   4   3   2   1   0
+       ~sy   0   0   0   0   0   0   0
+byte 3:
+   bit   7   6   5   4   3   2   1   0
+         0   0 ~sy ~sx   0   1   1   0
+byte 4:
+   bit   7   6   5   4   3   2   1   0
+        x7  x6  x5  x4  x3  x2  x1  x0
+byte 5:
+   bit   7   6   5   4   3   2   1   0
+        y7  y6  y5  y4  y3  y2  y1  y0
+
+
+         x and y are written in two's complement spread
+             over 9 bits with sx/sy the relative top bit and
+             x7..x0 and y7..y0 the lower bits.
+	 ~sx is the inverse of sx, ~sy is the inverse of sy.
+         The sign of y is opposite to what the input driver
+             expects for a relative movement

Documentation/networking/ip-sysctl.txt

@@ -56,6 +56,13 @@ ip_forward_use_pmtu - BOOLEAN
 	0 - disabled
 	1 - enabled
 
+fwmark_reflect - BOOLEAN
+	Controls the fwmark of kernel-generated IPv4 reply packets that are not
+	associated with a socket for example, TCP RSTs or ICMP echo replies).
+	If unset, these packets have a fwmark of zero. If set, they have the
+	fwmark of the packet they are replying to.
+	Default: 0
+
 route/max_size - INTEGER
 	Maximum number of routes allowed in the kernel.  Increase
 	this when using large numbers of interfaces and/or routes.
@@ -1201,6 +1208,13 @@ conf/all/forwarding - BOOLEAN
 proxy_ndp - BOOLEAN
 	Do proxy ndp.
 
+fwmark_reflect - BOOLEAN
+	Controls the fwmark of kernel-generated IPv6 reply packets that are not
+	associated with a socket for example, TCP RSTs or ICMPv6 echo replies).
+	If unset, these packets have a fwmark of zero. If set, they have the
+	fwmark of the packet they are replying to.
+	Default: 0
+
 conf/interface/*:
 	Change special settings per interface.
 

Documentation/networking/timestamping.txt

@@ -136,7 +136,7 @@ SOF_TIMESTAMPING_OPT_ID:
 
   This option is implemented only for transmit timestamps. There, the
   timestamp is always looped along with a struct sock_extended_err.
-  The option modifies field ee_info to pass an id that is unique
+  The option modifies field ee_data to pass an id that is unique
   among all possibly concurrently outstanding timestamp requests for
   that socket. In practice, it is a monotonically increasing u32
   (that wraps).

MAINTAINERS

@@ -2754,6 +2754,13 @@ W:	http://www.chelsio.com
 S:	Supported
 F:	drivers/net/ethernet/chelsio/cxgb3/
 
+CXGB3 ISCSI DRIVER (CXGB3I)
+M:      Karen Xie <kxie@chelsio.com>
+L:      linux-scsi@vger.kernel.org
+W:      http://www.chelsio.com
+S:      Supported
+F:      drivers/scsi/cxgbi/cxgb3i
+
 CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
 M:	Steve Wise <swise@chelsio.com>
 L:	linux-rdma@vger.kernel.org
@@ -2768,6 +2775,13 @@ W:	http://www.chelsio.com
 S:	Supported
 F:	drivers/net/ethernet/chelsio/cxgb4/
 
+CXGB4 ISCSI DRIVER (CXGB4I)
+M:      Karen Xie <kxie@chelsio.com>
+L:      linux-scsi@vger.kernel.org
+W:      http://www.chelsio.com
+S:      Supported
+F:      drivers/scsi/cxgbi/cxgb4i
+
 CXGB4 IWARP RNIC DRIVER (IW_CXGB4)
 M:	Steve Wise <swise@chelsio.com>
 L:	linux-rdma@vger.kernel.org
@@ -4733,6 +4747,7 @@ L:	linux-iio@vger.kernel.org
 S:	Maintained
 F:	drivers/iio/
 F:	drivers/staging/iio/
+F:	include/linux/iio/
 
 IKANOS/ADI EAGLE ADSL USB DRIVER
 M:	Matthieu Castet <castet.matthieu@free.fr>
@@ -6613,6 +6628,23 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
 S:	Maintained
 F:	arch/arm/*omap*/
 F:	drivers/i2c/busses/i2c-omap.c
+F:	drivers/irqchip/irq-omap-intc.c
+F:	drivers/mfd/*omap*.c
+F:	drivers/mfd/menelaus.c
+F:	drivers/mfd/palmas.c
+F:	drivers/mfd/tps65217.c
+F:	drivers/mfd/tps65218.c
+F:	drivers/mfd/tps65910.c
+F:	drivers/mfd/twl-core.[ch]
+F:	drivers/mfd/twl4030*.c
+F:	drivers/mfd/twl6030*.c
+F:	drivers/mfd/twl6040*.c
+F:	drivers/regulator/palmas-regulator*.c
+F:	drivers/regulator/pbias-regulator.c
+F:	drivers/regulator/tps65217-regulator.c
+F:	drivers/regulator/tps65218-regulator.c
+F:	drivers/regulator/tps65910-regulator.c
+F:	drivers/regulator/twl-regulator.c
 F:	include/linux/i2c-omap.h
 
 OMAP DEVICE TREE SUPPORT
@@ -6623,6 +6655,9 @@ L:	devicetree@vger.kernel.org
 S:	Maintained
 F:	arch/arm/boot/dts/*omap*
 F:	arch/arm/boot/dts/*am3*
+F:	arch/arm/boot/dts/*am4*
+F:	arch/arm/boot/dts/*am5*
+F:	arch/arm/boot/dts/*dra7*
 
 OMAP CLOCK FRAMEWORK SUPPORT
 M:	Paul Walmsley <paul@pwsan.com>
@@ -6870,11 +6905,12 @@ F:	drivers/scsi/osd/
 F:	include/scsi/osd_*
 F:	fs/exofs/
 
-OVERLAYFS FILESYSTEM
+OVERLAY FILESYSTEM
 M:	Miklos Szeredi <miklos@szeredi.hu>
-L:	linux-fsdevel@vger.kernel.org
+L:	linux-unionfs@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs.git
 S:	Supported
-F:	fs/overlayfs/*
+F:	fs/overlayfs/
 F:	Documentation/filesystems/overlayfs.txt
 
 P54 WIRELESS DRIVER

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 18
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc7
 NAME = Diseased Newt
 
 # *DOCUMENTATION*
@@ -297,7 +297,7 @@ CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
 
 HOSTCC       = gcc
 HOSTCXX      = g++
-HOSTCFLAGS   = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer
+HOSTCFLAGS   = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89
 HOSTCXXFLAGS = -O2
 
 ifeq ($(shell $(HOSTCC) -v 2>&1 | grep -c "clang version"), 1)
@@ -401,7 +401,8 @@ KBUILD_CPPFLAGS := -D__KERNEL__
 KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		   -fno-strict-aliasing -fno-common \
 		   -Werror-implicit-function-declaration \
-		   -Wno-format-security
+		   -Wno-format-security \
+		   -std=gnu89
 
 KBUILD_AFLAGS_KERNEL :=
 KBUILD_CFLAGS_KERNEL :=

arch/arm/boot/compressed/head.S

@@ -397,8 +397,7 @@ dtb_check_done:
 		add	sp, sp, r6
 #endif
 
-		tst	r4, #1
+		bl	cache_clean_flush
-		bleq	cache_clean_flush
 
 		adr	r0, BSYM(restart)
 		add	r0, r0, r6
@@ -1047,6 +1046,8 @@ cache_clean_flush:
 		b	call_cache_fn
 
 __armv4_mpu_cache_flush:
+		tst	r4, #1
+		movne	pc, lr
 		mov	r2, #1
 		mov	r3, #0
 		mcr	p15, 0, ip, c7, c6, 0	@ invalidate D cache
@@ -1064,6 +1065,8 @@ __armv4_mpu_cache_flush:
 		mov	pc, lr
 		
 __fa526_cache_flush:
+		tst	r4, #1
+		movne	pc, lr
 		mov	r1, #0
 		mcr	p15, 0, r1, c7, c14, 0	@ clean and invalidate D cache
 		mcr	p15, 0, r1, c7, c5, 0	@ flush I cache
@@ -1072,13 +1075,16 @@ __fa526_cache_flush:
 
 __armv6_mmu_cache_flush:
 		mov	r1, #0
-		mcr	p15, 0, r1, c7, c14, 0	@ clean+invalidate D
+		tst	r4, #1
+		mcreq	p15, 0, r1, c7, c14, 0	@ clean+invalidate D
 		mcr	p15, 0, r1, c7, c5, 0	@ invalidate I+BTB
-		mcr	p15, 0, r1, c7, c15, 0	@ clean+invalidate unified
+		mcreq	p15, 0, r1, c7, c15, 0	@ clean+invalidate unified
 		mcr	p15, 0, r1, c7, c10, 4	@ drain WB
 		mov	pc, lr
 
 __armv7_mmu_cache_flush:
+		tst	r4, #1
+		bne	iflush
 		mrc	p15, 0, r10, c0, c1, 5	@ read ID_MMFR1
 		tst	r10, #0xf << 16		@ hierarchical cache (ARMv7)
 		mov	r10, #0
@@ -1139,6 +1145,8 @@ iflush:
 		mov	pc, lr
 
 __armv5tej_mmu_cache_flush:
+		tst	r4, #1
+		movne	pc, lr
 1:		mrc	p15, 0, r15, c7, c14, 3	@ test,clean,invalidate D cache
 		bne	1b
 		mcr	p15, 0, r0, c7, c5, 0	@ flush I cache
@@ -1146,6 +1154,8 @@ __armv5tej_mmu_cache_flush:
 		mov	pc, lr
 
 __armv4_mmu_cache_flush:
+		tst	r4, #1
+		movne	pc, lr
 		mov	r2, #64*1024		@ default: 32K dcache size (*2)
 		mov	r11, #32		@ default: 32 byte line size
 		mrc	p15, 0, r3, c0, c0, 1	@ read cache type
@@ -1179,6 +1189,8 @@ no_cache_id:
 
 __armv3_mmu_cache_flush:
 __armv3_mpu_cache_flush:
+		tst	r4, #1
+		movne	pc, lr
 		mov	r1, #0
 		mcr	p15, 0, r1, c7, c0, 0	@ invalidate whole cache v3
 		mov	pc, lr

arch/arm/boot/dts/am335x-evm.dts

@@ -489,7 +489,7 @@
 			reg = <0x00060000 0x00020000>;
 		};
 		partition@4 {
-			label = "NAND.u-boot-spl";
+			label = "NAND.u-boot-spl-os";
 			reg = <0x00080000 0x00040000>;
 		};
 		partition@5 {

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -291,8 +291,8 @@
 		dcdc3: regulator-dcdc3 {
 			compatible = "ti,tps65218-dcdc3";
 			regulator-name = "vdcdc3";
-			regulator-min-microvolt = <1350000>;
+			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1350000>;
+			regulator-max-microvolt = <1500000>;
 			regulator-boot-on;
 			regulator-always-on;
 		};

arch/arm/boot/dts/am437x-sk-evm.dts

@@ -363,8 +363,8 @@
 		dcdc3: regulator-dcdc3 {
 			compatible = "ti,tps65218-dcdc3";
 			regulator-name = "vdds_ddr";
-			regulator-min-microvolt = <1350000>;
+			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1350000>;
+			regulator-max-microvolt = <1500000>;
 			regulator-boot-on;
 			regulator-always-on;
 		};

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -358,8 +358,8 @@
 		dcdc3: regulator-dcdc3 {
 			compatible = "ti,tps65218-dcdc3";
 			regulator-name = "vdcdc3";
-			regulator-min-microvolt = <1350000>;
+			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1350000>;
+			regulator-max-microvolt = <1500000>;
 			regulator-boot-on;
 			regulator-always-on;
 		};

arch/arm/boot/dts/exynos5250-snow.dts

@@ -624,4 +624,8 @@
 	num-cs = <1>;
 };
 
+&usbdrd_dwc3 {
+	dr_mode = "host";
+};
+
 #include "cros-ec-keyboard.dtsi"

arch/arm/boot/dts/exynos5250.dtsi

@@ -555,7 +555,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		dwc3 {
+		usbdrd_dwc3: dwc3 {
 			compatible = "synopsys,dwc3";
 			reg = <0x12000000 0x10000>;
 			interrupts = <0 72 0>;

arch/arm/boot/dts/r8a7740.dtsi

@@ -433,7 +433,7 @@
 			clocks = <&cpg_clocks R8A7740_CLK_S>,
 				 <&cpg_clocks R8A7740_CLK_S>, <&sub_clk>,
 				 <&cpg_clocks R8A7740_CLK_B>,
-				 <&sub_clk>, <&sub_clk>,
+				 <&cpg_clocks R8A7740_CLK_HPP>, <&sub_clk>,
 				 <&cpg_clocks R8A7740_CLK_B>;
 			#clock-cells = <1>;
 			renesas,clock-indices = <

arch/arm/boot/dts/r8a7790.dtsi

@@ -756,9 +756,9 @@
 			#clock-cells = <0>;
 			clock-output-names = "sd2";
 		};
-		sd3_clk: sd3_clk@e615007c {
+		sd3_clk: sd3_clk@e615026c {
 			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe615007c 0 4>;
+			reg = <0 0xe615026c 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
 			clock-output-names = "sd3";

arch/arm/boot/dts/sama5d31.dtsi

@@ -12,5 +12,5 @@
 #include "sama5d3_uart.dtsi"
 
 / {
-	compatible = "atmel,samad31", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
 };

arch/arm/boot/dts/sama5d33.dtsi

@@ -10,5 +10,5 @@
 #include "sama5d3_gmac.dtsi"
 
 / {
-	compatible = "atmel,samad33", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5";
 };

arch/arm/boot/dts/sama5d34.dtsi

@@ -12,5 +12,5 @@
 #include "sama5d3_mci2.dtsi"
 
 / {
-	compatible = "atmel,samad34", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5";
 };

arch/arm/boot/dts/sama5d35.dtsi

@@ -14,5 +14,5 @@
 #include "sama5d3_tcb1.dtsi"
 
 / {
-	compatible = "atmel,samad35", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5";
 };

arch/arm/boot/dts/sama5d36.dtsi

@@ -16,5 +16,5 @@
 #include "sama5d3_uart.dtsi"
 
 / {
-	compatible = "atmel,samad36", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
 };

arch/arm/boot/dts/sama5d3xcm.dtsi

@@ -8,7 +8,7 @@
  */
 
 / {
-	compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
 
 	chosen {
 		bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -361,6 +361,10 @@
 			clocks = <&ahb1_gates 6>;
 			resets = <&ahb1_rst 6>;
 			#dma-cells = <1>;
+
+			/* DMA controller requires AHB1 clocked from PLL6 */
+			assigned-clocks = <&ahb1_mux>;
+			assigned-clock-parents = <&pll6>;
 		};
 
 		mmc0: mmc@01c0f000 {

arch/arm/boot/dts/tegra114-dalmore.dts

@@ -15,6 +15,7 @@
 	aliases {
 		rtc0 = "/i2c@7000d000/tps65913@58";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
 	};
 
 	memory {

arch/arm/boot/dts/tegra114-roth.dts

@@ -15,6 +15,10 @@
 		linux,initrd-end = <0x82800000>;
 	};
 
+	aliases {
+		serial0 = &uartd;
+	};
+
 	firmware {
 		trusted-foundations {
 			compatible = "tlm,trusted-foundations";
@@ -916,8 +920,6 @@
 						regulator-name = "vddio-sdmmc3";
 						regulator-min-microvolt = <1800000>;
 						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-						regulator-boot-on;
 					};
 
 					ldousb {
@@ -962,7 +964,7 @@
 	sdhci@78000400 {
 		status = "okay";
 		bus-width = <4>;
-		vmmc-supply = <&vddio_sdmmc3>;
+		vqmmc-supply = <&vddio_sdmmc3>;
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 		power-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
 	};
@@ -971,7 +973,6 @@
 	sdhci@78000600 {
 		status = "okay";
 		bus-width = <8>;
-		vmmc-supply = <&vdd_1v8>;
 		non-removable;
 	};
 

arch/arm/boot/dts/tegra114-tn7.dts

@@ -15,6 +15,10 @@
 		linux,initrd-end = <0x82800000>;
 	};
 
+	aliases {
+		serial0 = &uartd;
+	};
+
 	firmware {
 		trusted-foundations {
 			compatible = "tlm,trusted-foundations";
@@ -240,7 +244,6 @@
 	sdhci@78000600 {
 		status = "okay";
 		bus-width = <8>;
-		vmmc-supply = <&vdd_1v8>;
 		non-removable;
 	};
 

arch/arm/boot/dts/tegra114.dtsi

@@ -9,13 +9,6 @@
 	compatible = "nvidia,tegra114";
 	interrupt-parent = <&gic>;
 
-	aliases {
-		serial0 = &uarta;
-		serial1 = &uartb;
-		serial2 = &uartc;
-		serial3 = &uartd;
-	};
-
 	host1x@50000000 {
 		compatible = "nvidia,tegra114-host1x", "simple-bus";
 		reg = <0x50000000 0x00028000>;

arch/arm/boot/dts/tegra124-jetson-tk1.dts

@@ -10,6 +10,7 @@
 	aliases {
 		rtc0 = "/i2c@0,7000d000/pmic@40";
 		rtc1 = "/rtc@0,7000e000";
+		serial0 = &uartd;
 	};
 
 	memory {

arch/arm/boot/dts/tegra124-nyan-big.dts

@@ -10,6 +10,7 @@
 	aliases {
 		rtc0 = "/i2c@0,7000d000/pmic@40";
 		rtc1 = "/rtc@0,7000e000";
+		serial0 = &uarta;
 	};
 
 	memory {

arch/arm/boot/dts/tegra124-venice2.dts

@@ -10,6 +10,7 @@
 	aliases {
 		rtc0 = "/i2c@0,7000d000/pmic@40";
 		rtc1 = "/rtc@0,7000e000";
+		serial0 = &uarta;
 	};
 
 	memory {

arch/arm/boot/dts/tegra124.dtsi

@@ -286,7 +286,7 @@
 	 * the APB DMA based serial driver, the comptible is
 	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
 	 */
-	serial@0,70006000 {
+	uarta: serial@0,70006000 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006000 0x0 0x40>;
 		reg-shift = <2>;
@@ -299,7 +299,7 @@
 		status = "disabled";
 	};
 
-	serial@0,70006040 {
+	uartb: serial@0,70006040 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006040 0x0 0x40>;
 		reg-shift = <2>;
@@ -312,7 +312,7 @@
 		status = "disabled";
 	};
 
-	serial@0,70006200 {
+	uartc: serial@0,70006200 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006200 0x0 0x40>;
 		reg-shift = <2>;
@@ -325,7 +325,7 @@
 		status = "disabled";
 	};
 
-	serial@0,70006300 {
+	uartd: serial@0,70006300 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006300 0x0 0x40>;
 		reg-shift = <2>;

arch/arm/boot/dts/tegra20-harmony.dts

@@ -10,6 +10,7 @@
 	aliases {
 		rtc0 = "/i2c@7000d000/tps6586x@34";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
 	};
 
 	memory {

arch/arm/boot/dts/tegra20-iris-512.dts

@@ -6,6 +6,11 @@
 	model = "Toradex Colibri T20 512MB on Iris";
 	compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20";
 
+	aliases {
+		serial0 = &uarta;
+		serial1 = &uartd;
+	};
+
 	host1x@50000000 {
 		hdmi@54280000 {
 			status = "okay";

arch/arm/boot/dts/tegra20-medcom-wide.dts

@@ -6,6 +6,10 @@
 	model = "Avionic Design Medcom-Wide board";
 	compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20";
 
+	aliases {
+		serial0 = &uartd;
+	};
+
 	pwm@7000a000 {
 		status = "okay";
 	};

arch/arm/boot/dts/tegra20-paz00.dts

@@ -10,6 +10,8 @@
 	aliases {
 		rtc0 = "/i2c@7000d000/tps6586x@34";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartc;
 	};
 
 	memory {

arch/arm/boot/dts/tegra20-seaboard.dts

@@ -10,6 +10,7 @@
 	aliases {
 		rtc0 = "/i2c@7000d000/tps6586x@34";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
 	};
 
 	memory {

arch/arm/boot/dts/tegra20-tamonten.dtsi

@@ -7,6 +7,7 @@
 	aliases {
 		rtc0 = "/i2c@7000d000/tps6586x@34";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
 	};
 
 	memory {

arch/arm/boot/dts/tegra20-trimslice.dts

@@ -10,6 +10,7 @@
 	aliases {
 		rtc0 = "/i2c@7000c500/rtc@56";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
 	};
 
 	memory {

arch/arm/boot/dts/tegra20-ventana.dts

@@ -10,6 +10,7 @@
 	aliases {
 		rtc0 = "/i2c@7000d000/tps6586x@34";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
 	};
 
 	memory {

arch/arm/boot/dts/tegra20-whistler.dts

@@ -10,6 +10,7 @@
 	aliases {
 		rtc0 = "/i2c@7000d000/max8907@3c";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
 	};
 
 	memory {

arch/arm/boot/dts/tegra20.dtsi

@@ -9,14 +9,6 @@
 	compatible = "nvidia,tegra20";
 	interrupt-parent = <&intc>;
 
-	aliases {
-		serial0 = &uarta;
-		serial1 = &uartb;
-		serial2 = &uartc;
-		serial3 = &uartd;
-		serial4 = &uarte;
-	};
-
 	host1x@50000000 {
 		compatible = "nvidia,tegra20-host1x", "simple-bus";
 		reg = <0x50000000 0x00024000>;

arch/arm/boot/dts/tegra30-apalis-eval.dts

@@ -11,6 +11,10 @@
 		rtc0 = "/i2c@7000c000/rtc@68";
 		rtc1 = "/i2c@7000d000/tps65911@2d";
 		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartc;
+		serial3 = &uartd;
 	};
 
 	pcie-controller@00003000 {

arch/arm/boot/dts/tegra30-beaver.dts

@@ -9,6 +9,7 @@
 	aliases {
 		rtc0 = "/i2c@7000d000/tps65911@2d";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
 	};
 
 	memory {

arch/arm/boot/dts/tegra30-cardhu.dtsi

@@ -30,6 +30,8 @@
 	aliases {
 		rtc0 = "/i2c@7000d000/tps65911@2d";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartc;
 	};
 
 	memory {

arch/arm/boot/dts/tegra30-colibri-eval-v3.dts

@@ -10,6 +10,9 @@
 		rtc0 = "/i2c@7000c000/rtc@68";
 		rtc1 = "/i2c@7000d000/tps65911@2d";
 		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartd;
 	};
 
 	host1x@50000000 {

arch/arm/boot/dts/tegra30.dtsi

@@ -9,14 +9,6 @@
 	compatible = "nvidia,tegra30";
 	interrupt-parent = <&intc>;
 
-	aliases {
-		serial0 = &uarta;
-		serial1 = &uartb;
-		serial2 = &uartc;
-		serial3 = &uartd;
-		serial4 = &uarte;
-	};
-
 	pcie-controller@00003000 {
 		compatible = "nvidia,tegra30-pcie";
 		device_type = "pci";

arch/arm/configs/exynos_defconfig

@@ -142,11 +142,13 @@ CONFIG_MMC_DW_IDMAC=y
 CONFIG_MMC_DW_EXYNOS=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_MAX77686=y
+CONFIG_RTC_DRV_MAX77802=y
 CONFIG_RTC_DRV_S5M=y
 CONFIG_RTC_DRV_S3C=y
 CONFIG_DMADEVICES=y
 CONFIG_PL330_DMA=y
 CONFIG_COMMON_CLK_MAX77686=y
+CONFIG_COMMON_CLK_MAX77802=y
 CONFIG_COMMON_CLK_S2MPS11=y
 CONFIG_EXYNOS_IOMMU=y
 CONFIG_IIO=y

arch/arm/configs/multi_v7_defconfig

@@ -217,6 +217,7 @@ CONFIG_I2C_CADENCE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_I2C_EXYNOS5=y
 CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_S3C2410=y
 CONFIG_I2C_SIRF=y
 CONFIG_I2C_TEGRA=y
 CONFIG_I2C_ST=y

arch/arm/include/asm/thread_info.h

@@ -44,16 +44,6 @@ struct cpu_context_save {
 	__u32	extra[2];		/* Xscale 'acc' register, etc */
 };
 
-struct arm_restart_block {
-	union {
-		/* For user cache flushing */
-		struct {
-			unsigned long start;
-			unsigned long end;
-		} cache;
-	};
-};
-
 /*
  * low level task data that entry.S needs immediate access to.
  * __switch_to() assumes cpu_context follows immediately after cpu_domain.
@@ -79,7 +69,6 @@ struct thread_info {
 	unsigned long		thumbee_state;	/* ThumbEE Handler Base register */
 #endif
 	struct restart_block	restart_block;
-	struct arm_restart_block	arm_restart_block;
 };
 
 #define INIT_THREAD_INFO(tsk)						\

arch/arm/kernel/traps.c

@@ -533,8 +533,6 @@ static int bad_syscall(int n, struct pt_regs *regs)
 	return regs->ARM_r0;
 }
 
-static long do_cache_op_restart(struct restart_block *);
-
 static inline int
 __do_cache_op(unsigned long start, unsigned long end)
 {
@@ -543,24 +541,8 @@ __do_cache_op(unsigned long start, unsigned long end)
 	do {
 		unsigned long chunk = min(PAGE_SIZE, end - start);
 
-		if (signal_pending(current)) {
+		if (fatal_signal_pending(current))
-			struct thread_info *ti = current_thread_info();
+			return 0;
-
-			ti->restart_block = (struct restart_block) {
-				.fn	= do_cache_op_restart,
-			};
-
-			ti->arm_restart_block = (struct arm_restart_block) {
-				{
-					.cache = {
-						.start	= start,
-						.end	= end,
-					},
-				},
-			};
-
-			return -ERESTART_RESTARTBLOCK;
-		}
 
 		ret = flush_cache_user_range(start, start + chunk);
 		if (ret)
@@ -573,15 +555,6 @@ __do_cache_op(unsigned long start, unsigned long end)
 	return 0;
 }
 
-static long do_cache_op_restart(struct restart_block *unused)
-{
-	struct arm_restart_block *restart_block;
-
-	restart_block = &current_thread_info()->arm_restart_block;
-	return __do_cache_op(restart_block->cache.start,
-			     restart_block->cache.end);
-}
-
 static inline int
 do_cache_op(unsigned long start, unsigned long end, int flags)
 {

arch/arm/kvm/mmu.c

@@ -197,7 +197,8 @@ static void unmap_range(struct kvm *kvm, pgd_t *pgdp,
 	pgd = pgdp + pgd_index(addr);
 	do {
 		next = kvm_pgd_addr_end(addr, end);
-		unmap_puds(kvm, pgd, addr, next);
+		if (!pgd_none(*pgd))
+			unmap_puds(kvm, pgd, addr, next);
 	} while (pgd++, addr = next, addr != end);
 }
 
@@ -834,6 +835,11 @@ static bool kvm_is_write_fault(struct kvm_vcpu *vcpu)
 	return kvm_vcpu_dabt_iswrite(vcpu);
 }
 
+static bool kvm_is_device_pfn(unsigned long pfn)
+{
+	return !pfn_valid(pfn);
+}
+
 static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 			  struct kvm_memory_slot *memslot, unsigned long hva,
 			  unsigned long fault_status)
@@ -904,7 +910,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	if (is_error_pfn(pfn))
 		return -EFAULT;
 
-	if (kvm_is_mmio_pfn(pfn))
+	if (kvm_is_device_pfn(pfn))
 		mem_type = PAGE_S2_DEVICE;
 
 	spin_lock(&kvm->mmu_lock);

arch/arm/mach-mvebu/board-v7.c

@@ -188,7 +188,7 @@ static void __init thermal_quirk(void)
 
 static void __init mvebu_dt_init(void)
 {
-	if (of_machine_is_compatible("plathome,openblocks-ax3-4"))
+	if (of_machine_is_compatible("marvell,armadaxp"))
 		i2c_quirk();
 	if (of_machine_is_compatible("marvell,a375-db")) {
 		external_abort_quirk();

arch/arm/mach-mvebu/coherency.c

@@ -400,6 +400,8 @@ int __init coherency_init(void)
 		 type == COHERENCY_FABRIC_TYPE_ARMADA_380)
 		armada_375_380_coherency_init(np);
 
+	of_node_put(np);
+
 	return 0;
 }
 

arch/arm/mach-shmobile/clock-r8a7740.c

@@ -451,7 +451,7 @@ enum {
 	MSTP128, MSTP127, MSTP125,
 	MSTP116, MSTP111, MSTP100, MSTP117,
 
-	MSTP230,
+	MSTP230, MSTP229,
 	MSTP222,
 	MSTP218, MSTP217, MSTP216, MSTP214,
 	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
@@ -470,11 +470,12 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP127] = SH_CLK_MSTP32(&div4_clks[DIV4_S],	SMSTPCR1, 27, 0), /* CEU20 */
 	[MSTP125] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR1, 25, 0), /* TMU0 */
 	[MSTP117] = SH_CLK_MSTP32(&div4_clks[DIV4_B],	SMSTPCR1, 17, 0), /* LCDC1 */
-	[MSTP116] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR1, 16, 0), /* IIC0 */
+	[MSTP116] = SH_CLK_MSTP32(&div4_clks[DIV4_HPP],	SMSTPCR1, 16, 0), /* IIC0 */
 	[MSTP111] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR1, 11, 0), /* TMU1 */
 	[MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_B],	SMSTPCR1,  0, 0), /* LCDC0 */
 
 	[MSTP230] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2, 30, 0), /* SCIFA6 */
+	[MSTP229] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR2, 29, 0), /* INTCA */
 	[MSTP222] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2, 22, 0), /* SCIFA7 */
 	[MSTP218] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],  SMSTPCR2, 18, 0), /* DMAC1 */
 	[MSTP217] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],  SMSTPCR2, 17, 0), /* DMAC2 */
@@ -571,6 +572,10 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-dma-engine.0",	&mstp_clks[MSTP218]),
 	CLKDEV_DEV_ID("sh-sci.7",		&mstp_clks[MSTP222]),
 	CLKDEV_DEV_ID("e6cd0000.serial",	&mstp_clks[MSTP222]),
+	CLKDEV_DEV_ID("renesas_intc_irqpin.0",	&mstp_clks[MSTP229]),
+	CLKDEV_DEV_ID("renesas_intc_irqpin.1",	&mstp_clks[MSTP229]),
+	CLKDEV_DEV_ID("renesas_intc_irqpin.2",	&mstp_clks[MSTP229]),
+	CLKDEV_DEV_ID("renesas_intc_irqpin.3",	&mstp_clks[MSTP229]),
 	CLKDEV_DEV_ID("sh-sci.6",		&mstp_clks[MSTP230]),
 	CLKDEV_DEV_ID("e6cc0000.serial",	&mstp_clks[MSTP230]),
 

arch/arm/mach-shmobile/clock-r8a7790.c

@@ -64,7 +64,7 @@
 
 #define SDCKCR		0xE6150074
 #define SD2CKCR		0xE6150078
-#define SD3CKCR		0xE615007C
+#define SD3CKCR		0xE615026C
 #define MMC0CKCR	0xE6150240
 #define MMC1CKCR	0xE6150244
 #define SSPCKCR		0xE6150248

arch/arm/mach-shmobile/setup-sh73a0.c

@@ -22,6 +22,7 @@
 #include <linux/of_platform.h>
 #include <linux/delay.h>
 #include <linux/input.h>
+#include <linux/i2c/i2c-sh_mobile.h>
 #include <linux/io.h>
 #include <linux/serial_sci.h>
 #include <linux/sh_dma.h>
@@ -188,11 +189,18 @@ static struct resource i2c4_resources[] = {
 	},
 };
 
+static struct i2c_sh_mobile_platform_data i2c_platform_data = {
+	.clks_per_count	= 2,
+};
+
 static struct platform_device i2c0_device = {
 	.name		= "i2c-sh_mobile",
 	.id		= 0,
 	.resource	= i2c0_resources,
 	.num_resources	= ARRAY_SIZE(i2c0_resources),
+	.dev		= {
+		.platform_data	= &i2c_platform_data,
+	},
 };
 
 static struct platform_device i2c1_device = {
@@ -200,6 +208,9 @@ static struct platform_device i2c1_device = {
 	.id		= 1,
 	.resource	= i2c1_resources,
 	.num_resources	= ARRAY_SIZE(i2c1_resources),
+	.dev		= {
+		.platform_data	= &i2c_platform_data,
+	},
 };
 
 static struct platform_device i2c2_device = {
@@ -207,6 +218,9 @@ static struct platform_device i2c2_device = {
 	.id		= 2,
 	.resource	= i2c2_resources,
 	.num_resources	= ARRAY_SIZE(i2c2_resources),
+	.dev		= {
+		.platform_data	= &i2c_platform_data,
+	},
 };
 
 static struct platform_device i2c3_device = {
@@ -214,6 +228,9 @@ static struct platform_device i2c3_device = {
 	.id		= 3,
 	.resource	= i2c3_resources,
 	.num_resources	= ARRAY_SIZE(i2c3_resources),
+	.dev		= {
+		.platform_data	= &i2c_platform_data,
+	},
 };
 
 static struct platform_device i2c4_device = {
@@ -221,6 +238,9 @@ static struct platform_device i2c4_device = {
 	.id		= 4,
 	.resource	= i2c4_resources,
 	.num_resources	= ARRAY_SIZE(i2c4_resources),
+	.dev		= {
+		.platform_data	= &i2c_platform_data,
+	},
 };
 
 static const struct sh_dmae_slave_config sh73a0_dmae_slaves[] = {

arch/arm/mach-tegra/irq.c

@@ -99,42 +99,42 @@ static inline void tegra_irq_write_mask(unsigned int irq, unsigned long reg)
 
 static void tegra_mask(struct irq_data *d)
 {
-	if (d->irq < FIRST_LEGACY_IRQ)
+	if (d->hwirq < FIRST_LEGACY_IRQ)
 		return;
 
-	tegra_irq_write_mask(d->irq, ICTLR_CPU_IER_CLR);
+	tegra_irq_write_mask(d->hwirq, ICTLR_CPU_IER_CLR);
 }
 
 static void tegra_unmask(struct irq_data *d)
 {
-	if (d->irq < FIRST_LEGACY_IRQ)
+	if (d->hwirq < FIRST_LEGACY_IRQ)
 		return;
 
-	tegra_irq_write_mask(d->irq, ICTLR_CPU_IER_SET);
+	tegra_irq_write_mask(d->hwirq, ICTLR_CPU_IER_SET);
 }
 
 static void tegra_ack(struct irq_data *d)
 {
-	if (d->irq < FIRST_LEGACY_IRQ)
+	if (d->hwirq < FIRST_LEGACY_IRQ)
 		return;
 
-	tegra_irq_write_mask(d->irq, ICTLR_CPU_IEP_FIR_CLR);
+	tegra_irq_write_mask(d->hwirq, ICTLR_CPU_IEP_FIR_CLR);
 }
 
 static void tegra_eoi(struct irq_data *d)
 {
-	if (d->irq < FIRST_LEGACY_IRQ)
+	if (d->hwirq < FIRST_LEGACY_IRQ)
 		return;
 
-	tegra_irq_write_mask(d->irq, ICTLR_CPU_IEP_FIR_CLR);
+	tegra_irq_write_mask(d->hwirq, ICTLR_CPU_IEP_FIR_CLR);
 }
 
 static int tegra_retrigger(struct irq_data *d)
 {
-	if (d->irq < FIRST_LEGACY_IRQ)
+	if (d->hwirq < FIRST_LEGACY_IRQ)
 		return 0;
 
-	tegra_irq_write_mask(d->irq, ICTLR_CPU_IEP_FIR_SET);
+	tegra_irq_write_mask(d->hwirq, ICTLR_CPU_IEP_FIR_SET);
 
 	return 1;
 }
@@ -142,7 +142,7 @@ static int tegra_retrigger(struct irq_data *d)
 #ifdef CONFIG_PM_SLEEP
 static int tegra_set_wake(struct irq_data *d, unsigned int enable)
 {
-	u32 irq = d->irq;
+	u32 irq = d->hwirq;
 	u32 index, mask;
 
 	if (irq < FIRST_LEGACY_IRQ ||

arch/arm/mm/Kconfig

@@ -798,6 +798,7 @@ config NEED_KUSER_HELPERS
 
 config KUSER_HELPERS
 	bool "Enable kuser helpers in vector page" if !NEED_KUSER_HELPERS
+	depends on MMU
 	default y
 	help
 	  Warning: disabling this option may break user programs.

arch/arm/mm/proc-v7.S

@@ -270,7 +270,6 @@ __v7_pj4b_setup:
 /* Auxiliary Debug Modes Control 1 Register */
 #define PJ4B_STATIC_BP (1 << 2) /* Enable Static BP */
 #define PJ4B_INTER_PARITY (1 << 8) /* Disable Internal Parity Handling */
-#define PJ4B_BCK_OFF_STREX (1 << 5) /* Enable the back off of STREX instr */
 #define PJ4B_CLEAN_LINE (1 << 16) /* Disable data transfer for clean line */
 
 /* Auxiliary Debug Modes Control 2 Register */
@@ -293,7 +292,6 @@ __v7_pj4b_setup:
 	/* Auxiliary Debug Modes Control 1 Register */
 	mrc	p15, 1,	r0, c15, c1, 1
 	orr     r0, r0, #PJ4B_CLEAN_LINE
-	orr     r0, r0, #PJ4B_BCK_OFF_STREX
 	orr     r0, r0, #PJ4B_INTER_PARITY
 	bic	r0, r0, #PJ4B_STATIC_BP
 	mcr	p15, 1,	r0, c15, c1, 1

arch/arm/mm/proc-xscale.S

@@ -535,7 +535,7 @@ ENTRY(cpu_xscale_do_suspend)
 	mrc	p15, 0, r5, c15, c1, 0	@ CP access reg
 	mrc	p15, 0, r6, c13, c0, 0	@ PID
 	mrc	p15, 0, r7, c3, c0, 0	@ domain ID
-	mrc	p15, 0, r8, c1, c1, 0	@ auxiliary control reg
+	mrc	p15, 0, r8, c1, c0, 1	@ auxiliary control reg
 	mrc	p15, 0, r9, c1, c0, 0	@ control reg
 	bic	r4, r4, #2		@ clear frequency change bit
 	stmia	r0, {r4 - r9}		@ store cp regs
@@ -552,7 +552,7 @@ ENTRY(cpu_xscale_do_resume)
 	mcr	p15, 0, r6, c13, c0, 0	@ PID
 	mcr	p15, 0, r7, c3, c0, 0	@ domain ID
 	mcr	p15, 0, r1, c2, c0, 0	@ translation table base addr
-	mcr	p15, 0, r8, c1, c1, 0	@ auxiliary control reg
+	mcr	p15, 0, r8, c1, c0, 1	@ auxiliary control reg
 	mov	r0, r9			@ control register
 	b	cpu_resume_mmu
 ENDPROC(cpu_xscale_do_resume)

arch/arm/plat-orion/gpio.c

@@ -497,6 +497,34 @@ static void orion_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 #define orion_gpio_dbg_show NULL
 #endif
 
+static void orion_gpio_unmask_irq(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	u32 reg_val;
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	reg_val = irq_reg_readl(gc->reg_base + ct->regs.mask);
+	reg_val |= mask;
+	irq_reg_writel(reg_val, gc->reg_base + ct->regs.mask);
+	irq_gc_unlock(gc);
+}
+
+static void orion_gpio_mask_irq(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	u32 mask = d->mask;
+	u32 reg_val;
+
+	irq_gc_lock(gc);
+	reg_val = irq_reg_readl(gc->reg_base + ct->regs.mask);
+	reg_val &= ~mask;
+	irq_reg_writel(reg_val, gc->reg_base + ct->regs.mask);
+	irq_gc_unlock(gc);
+}
+
 void __init orion_gpio_init(struct device_node *np,
 			    int gpio_base, int ngpio,
 			    void __iomem *base, int mask_offset,
@@ -565,8 +593,8 @@ void __init orion_gpio_init(struct device_node *np,
 	ct = gc->chip_types;
 	ct->regs.mask = ochip->mask_offset + GPIO_LEVEL_MASK_OFF;
 	ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW;
-	ct->chip.irq_mask = irq_gc_mask_clr_bit;
+	ct->chip.irq_mask = orion_gpio_mask_irq;
-	ct->chip.irq_unmask = irq_gc_mask_set_bit;
+	ct->chip.irq_unmask = orion_gpio_unmask_irq;
 	ct->chip.irq_set_type = gpio_irq_set_type;
 	ct->chip.name = ochip->chip.label;
 
@@ -575,8 +603,8 @@ void __init orion_gpio_init(struct device_node *np,
 	ct->regs.ack = GPIO_EDGE_CAUSE_OFF;
 	ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	ct->chip.irq_ack = irq_gc_ack_clr_bit;
-	ct->chip.irq_mask = irq_gc_mask_clr_bit;
+	ct->chip.irq_mask = orion_gpio_mask_irq;
-	ct->chip.irq_unmask = irq_gc_mask_set_bit;
+	ct->chip.irq_unmask = orion_gpio_unmask_irq;
 	ct->chip.irq_set_type = gpio_irq_set_type;
 	ct->handler = handle_edge_irq;
 	ct->chip.name = ochip->chip.label;

arch/arm64/boot/dts/apm-storm.dtsi

@@ -599,7 +599,7 @@
 			compatible = "apm,xgene-enet";
 			status = "disabled";
 			reg = <0x0 0x17020000 0x0 0xd100>,
-			      <0x0 0X17030000 0x0 0X400>,
+			      <0x0 0X17030000 0x0 0Xc300>,
 			      <0x0 0X10000000 0x0 0X200>;
 			reg-names = "enet_csr", "ring_csr", "ring_cmd";
 			interrupts = <0x0 0x3c 0x4>;
@@ -624,9 +624,9 @@
 		sgenet0: ethernet@1f210000 {
 			compatible = "apm,xgene-enet";
 			status = "disabled";
-			reg = <0x0 0x1f210000 0x0 0x10000>,
+			reg = <0x0 0x1f210000 0x0 0xd100>,
-			      <0x0 0x1f200000 0x0 0X10000>,
+			      <0x0 0x1f200000 0x0 0Xc300>,
-			      <0x0 0x1B000000 0x0 0X20000>;
+			      <0x0 0x1B000000 0x0 0X200>;
 			reg-names = "enet_csr", "ring_csr", "ring_cmd";
 			interrupts = <0x0 0xA0 0x4>;
 			dma-coherent;
@@ -639,7 +639,7 @@
 			compatible = "apm,xgene-enet";
 			status = "disabled";
 			reg = <0x0 0x1f610000 0x0 0xd100>,
-			      <0x0 0x1f600000 0x0 0X400>,
+			      <0x0 0x1f600000 0x0 0Xc300>,
 			      <0x0 0x18000000 0x0 0X200>;
 			reg-names = "enet_csr", "ring_csr", "ring_cmd";
 			interrupts = <0x0 0x60 0x4>;

arch/arm64/include/asm/memory.h

@@ -142,7 +142,7 @@ static inline void *phys_to_virt(phys_addr_t x)
  *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
  *  virt_addr_valid(k)	indicates whether a virtual address is valid
  */
-#define ARCH_PFN_OFFSET		PHYS_PFN_OFFSET
+#define ARCH_PFN_OFFSET		((unsigned long)PHYS_PFN_OFFSET)
 
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 #define	virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)

arch/arm64/kernel/efi-entry.S

@@ -54,18 +54,17 @@ ENTRY(efi_stub_entry)
 	b.eq	efi_load_fail
 
 	/*
-	 * efi_entry() will have relocated the kernel image if necessary
+	 * efi_entry() will have copied the kernel image if necessary and we
-	 * and we return here with device tree address in x0 and the kernel
+	 * return here with device tree address in x0 and the kernel entry
-	 * entry point stored at *image_addr. Save those values in registers
+	 * point stored at *image_addr. Save those values in registers which
-	 * which are callee preserved.
+	 * are callee preserved.
 	 */
 	mov	x20, x0		// DTB address
 	ldr	x0, [sp, #16]	// relocated _text address
 	mov	x21, x0
 
 	/*
-	 * Flush dcache covering current runtime addresses
+	 * Calculate size of the kernel Image (same for original and copy).
-	 * of kernel text/data. Then flush all of icache.
 	 */
 	adrp	x1, _text
 	add	x1, x1, #:lo12:_text
@@ -73,9 +72,24 @@ ENTRY(efi_stub_entry)
 	add	x2, x2, #:lo12:_edata
 	sub	x1, x2, x1
 
+	/*
+	 * Flush the copied Image to the PoC, and ensure it is not shadowed by
+	 * stale icache entries from before relocation.
+	 */
 	bl	__flush_dcache_area
 	ic	ialluis
 
+	/*
+	 * Ensure that the rest of this function (in the original Image) is
+	 * visible when the caches are disabled. The I-cache can't have stale
+	 * entries for the VA range of the current image, so no maintenance is
+	 * necessary.
+	 */
+	adr	x0, efi_stub_entry
+	adr	x1, efi_stub_entry_end
+	sub	x1, x1, x0
+	bl	__flush_dcache_area
+
 	/* Turn off Dcache and MMU */
 	mrs	x0, CurrentEL
 	cmp	x0, #CurrentEL_EL2
@@ -105,4 +119,5 @@ efi_load_fail:
 	ldp	x29, x30, [sp], #32
 	ret
 
+efi_stub_entry_end:
 ENDPROC(efi_stub_entry)

arch/arm64/kernel/insn.c

@@ -163,9 +163,10 @@ static int __kprobes aarch64_insn_patch_text_cb(void *arg)
 		 * which ends with "dsb; isb" pair guaranteeing global
 		 * visibility.
 		 */
-		atomic_set(&pp->cpu_count, -1);
+		/* Notify other processors with an additional increment. */
+		atomic_inc(&pp->cpu_count);
 	} else {
-		while (atomic_read(&pp->cpu_count) != -1)
+		while (atomic_read(&pp->cpu_count) <= num_online_cpus())
 			cpu_relax();
 		isb();
 	}

arch/arm64/kvm/sys_regs.c

@@ -424,6 +424,11 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	/* VBAR_EL1 */
 	{ Op0(0b11), Op1(0b000), CRn(0b1100), CRm(0b0000), Op2(0b000),
 	  NULL, reset_val, VBAR_EL1, 0 },
+
+	/* ICC_SRE_EL1 */
+	{ Op0(0b11), Op1(0b000), CRn(0b1100), CRm(0b1100), Op2(0b101),
+	  trap_raz_wi },
+
 	/* CONTEXTIDR_EL1 */
 	{ Op0(0b11), Op1(0b000), CRn(0b1101), CRm(0b0000), Op2(0b001),
 	  access_vm_reg, reset_val, CONTEXTIDR_EL1, 0 },
@@ -690,6 +695,10 @@ static const struct sys_reg_desc cp15_regs[] = {
 	{ Op1( 0), CRn(10), CRm( 2), Op2( 1), access_vm_reg, NULL, c10_NMRR },
 	{ Op1( 0), CRn(10), CRm( 3), Op2( 0), access_vm_reg, NULL, c10_AMAIR0 },
 	{ Op1( 0), CRn(10), CRm( 3), Op2( 1), access_vm_reg, NULL, c10_AMAIR1 },
+
+	/* ICC_SRE */
+	{ Op1( 0), CRn(12), CRm(12), Op2( 5), trap_raz_wi },
+
 	{ Op1( 0), CRn(13), CRm( 0), Op2( 1), access_vm_reg, NULL, c13_CID },
 };
 

arch/arm64/lib/clear_user.S

@@ -46,7 +46,7 @@ USER(9f, strh	wzr, [x0], #2	)
 	sub	x1, x1, #2
 4:	adds	x1, x1, #1
 	b.mi	5f
-	strb	wzr, [x0]
+USER(9f, strb	wzr, [x0]	)
 5:	mov	x0, #0
 	ret
 ENDPROC(__clear_user)

arch/arm64/mm/mmu.c

@@ -202,7 +202,7 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
 }
 
 static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
-				  unsigned long end, unsigned long phys,
+				  unsigned long end, phys_addr_t phys,
 				  int map_io)
 {
 	pud_t *pud;

arch/ia64/kvm/kvm-ia64.c

@@ -1563,7 +1563,7 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
 
 	for (i = 0; i < npages; i++) {
 		pfn = gfn_to_pfn(kvm, base_gfn + i);
-		if (!kvm_is_mmio_pfn(pfn)) {
+		if (!kvm_is_reserved_pfn(pfn)) {
 			kvm_set_pmt_entry(kvm, base_gfn + i,
 					pfn << PAGE_SHIFT,
 				_PAGE_AR_RWX | _PAGE_MA_WB);

arch/mips/Kconfig

@@ -2101,9 +2101,17 @@ config 64BIT_PHYS_ADDR
 config ARCH_PHYS_ADDR_T_64BIT
        def_bool 64BIT_PHYS_ADDR
 
+choice
+	prompt "SmartMIPS or microMIPS ASE support"
+
+config CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS
+	bool "None"
+	help
+	  Select this if you want neither microMIPS nor SmartMIPS support
+
 config CPU_HAS_SMARTMIPS
 	depends on SYS_SUPPORTS_SMARTMIPS
-	bool "Support for the SmartMIPS ASE"
+	bool "SmartMIPS"
 	help
 	  SmartMIPS is a extension of the MIPS32 architecture aimed at
 	  increased security at both hardware and software level for
@@ -2115,11 +2123,13 @@ config CPU_HAS_SMARTMIPS
 
 config CPU_MICROMIPS
 	depends on SYS_SUPPORTS_MICROMIPS
-	bool "Build kernel using microMIPS ISA"
+	bool "microMIPS"
 	help
 	  When this option is enabled the kernel will be built using the
 	  microMIPS ISA
 
+endchoice
+
 config CPU_HAS_MSA
 	bool "Support for the MIPS SIMD Architecture (EXPERIMENTAL)"
 	depends on CPU_SUPPORTS_MSA

arch/mips/include/asm/jump_label.h

@@ -20,9 +20,15 @@
 #define WORD_INSN ".word"
 #endif
 
+#ifdef CONFIG_CPU_MICROMIPS
+#define NOP_INSN "nop32"
+#else
+#define NOP_INSN "nop"
+#endif
+
 static __always_inline bool arch_static_branch(struct static_key *key)
 {
-	asm_volatile_goto("1:\tnop\n\t"
+	asm_volatile_goto("1:\t" NOP_INSN "\n\t"
 		"nop\n\t"
 		".pushsection __jump_table,  \"aw\"\n\t"
 		WORD_INSN " 1b, %l[l_yes], %0\n\t"

arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h

@@ -41,10 +41,8 @@
 #define cpu_has_mcheck		0
 #define cpu_has_mdmx		0
 #define cpu_has_mips16		0
-#define cpu_has_mips32r1	0
 #define cpu_has_mips32r2	0
 #define cpu_has_mips3d		0
-#define cpu_has_mips64r1	0
 #define cpu_has_mips64r2	0
 #define cpu_has_mipsmt		0
 #define cpu_has_prefetch	0

arch/mips/include/asm/mipsregs.h

@@ -661,6 +661,8 @@
 #define MIPS_CONF6_SYND		(_ULCAST_(1) << 13)
 /* proAptiv FTLB on/off bit */
 #define MIPS_CONF6_FTLBEN	(_ULCAST_(1) << 15)
+/* FTLB probability bits */
+#define MIPS_CONF6_FTLBP_SHIFT	(16)
 
 #define MIPS_CONF7_WII		(_ULCAST_(1) << 31)
 

arch/mips/include/asm/r4kcache.h

@@ -257,7 +257,11 @@ static inline void protected_flush_icache_line(unsigned long addr)
  */
 static inline void protected_writeback_dcache_line(unsigned long addr)
 {
+#ifdef CONFIG_EVA
+	protected_cachee_op(Hit_Writeback_Inv_D, addr);
+#else
 	protected_cache_op(Hit_Writeback_Inv_D, addr);
+#endif
 }
 
 static inline void protected_writeback_scache_line(unsigned long addr)

arch/mips/include/asm/uaccess.h

@@ -301,7 +301,8 @@ do {									\
 			__get_kernel_common((x), size, __gu_ptr);	\
 		else							\
 			__get_user_common((x), size, __gu_ptr);		\
-	}								\
+	} else								\
+		(x) = 0;						\
 									\
 	__gu_err;							\
 })
@@ -316,6 +317,7 @@ do {									\
 	"	.insn						\n"	\
 	"	.section .fixup,\"ax\"				\n"	\
 	"3:	li	%0, %4					\n"	\
+	"	move	%1, $0					\n"	\
 	"	j	2b					\n"	\
 	"	.previous					\n"	\
 	"	.section __ex_table,\"a\"			\n"	\
@@ -630,6 +632,7 @@ do {									\
 	"	.insn						\n"	\
 	"	.section .fixup,\"ax\"				\n"	\
 	"3:	li	%0, %4					\n"	\
+	"	move	%1, $0					\n"	\
 	"	j	2b					\n"	\
 	"	.previous					\n"	\
 	"	.section __ex_table,\"a\"			\n"	\
@@ -773,10 +776,11 @@ extern void __put_user_unaligned_unknown(void);
 	"jal\t" #destination "\n\t"
 #endif
 
-#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
+#if defined(CONFIG_CPU_DADDI_WORKAROUNDS) || (defined(CONFIG_EVA) &&	\
-#define DADDI_SCRATCH "$0"
+					      defined(CONFIG_CPU_HAS_PREFETCH))
-#else
 #define DADDI_SCRATCH "$3"
+#else
+#define DADDI_SCRATCH "$0"
 #endif
 
 extern size_t __copy_user(void *__to, const void *__from, size_t __n);
@@ -1418,7 +1422,7 @@ static inline long __strnlen_user(const char __user *s, long n)
 }
 
 /*
- * strlen_user: - Get the size of a string in user space.
+ * strnlen_user: - Get the size of a string in user space.
  * @str: The string to measure.
  *
  * Context: User context only.	This function may sleep.
@@ -1427,9 +1431,7 @@ static inline long __strnlen_user(const char __user *s, long n)
  *
  * Returns the size of the string INCLUDING the terminating NUL.
  * On exception, returns 0.
- *
+ * If the string is too long, returns a value greater than @n.
- * If there is a limit on the length of a valid string, you may wish to
- * consider using strnlen_user() instead.
  */
 static inline long strnlen_user(const char __user *s, long n)
 {

arch/mips/include/uapi/asm/unistd.h

@@ -1045,7 +1045,7 @@
 #define __NR_seccomp			(__NR_Linux + 316)
 #define __NR_getrandom			(__NR_Linux + 317)
 #define __NR_memfd_create		(__NR_Linux + 318)
-#define __NR_memfd_create		(__NR_Linux + 319)
+#define __NR_bpf			(__NR_Linux + 319)
 
 /*
  * Offset of the last N32 flavoured syscall

arch/mips/kernel/bmips_vec.S

@@ -208,7 +208,6 @@ bmips_reset_nmi_vec_end:
 END(bmips_reset_nmi_vec)
 
 	.set	pop
-	.previous
 
 /***********************************************************************
  * CPU1 warm restart vector (used for second and subsequent boots).
@@ -281,5 +280,3 @@ LEAF(bmips_enable_xks01)
 	jr	ra
 
 END(bmips_enable_xks01)
-
-	.previous

arch/mips/kernel/cps-vec.S

@@ -229,6 +229,7 @@ LEAF(mips_cps_core_init)
 	 nop
 
 	.set	push
+	.set	mips32r2
 	.set	mt
 
 	/* Only allow 1 TC per VPE to execute... */
@@ -345,6 +346,7 @@ LEAF(mips_cps_boot_vpes)
 	 nop
 
 	.set	push
+	.set	mips32r2
 	.set	mt
 
 1:	/* Enter VPE configuration state */

arch/mips/kernel/cpu-probe.c

@@ -193,6 +193,32 @@ static void set_isa(struct cpuinfo_mips *c, unsigned int isa)
 static char unknown_isa[] = KERN_ERR \
 	"Unsupported ISA type, c0.config0: %d.";
 
+static unsigned int calculate_ftlb_probability(struct cpuinfo_mips *c)
+{
+
+	unsigned int probability = c->tlbsize / c->tlbsizevtlb;
+
+	/*
+	 * 0 = All TLBWR instructions go to FTLB
+	 * 1 = 15:1: For every 16 TBLWR instructions, 15 go to the
+	 * FTLB and 1 goes to the VTLB.
+	 * 2 = 7:1: As above with 7:1 ratio.
+	 * 3 = 3:1: As above with 3:1 ratio.
+	 *
+	 * Use the linear midpoint as the probability threshold.
+	 */
+	if (probability >= 12)
+		return 1;
+	else if (probability >= 6)
+		return 2;
+	else
+		/*
+		 * So FTLB is less than 4 times bigger than VTLB.
+		 * A 3:1 ratio can still be useful though.
+		 */
+		return 3;
+}
+
 static void set_ftlb_enable(struct cpuinfo_mips *c, int enable)
 {
 	unsigned int config6;
@@ -203,9 +229,14 @@ static void set_ftlb_enable(struct cpuinfo_mips *c, int enable)
 	case CPU_P5600:
 		/* proAptiv & related cores use Config6 to enable the FTLB */
 		config6 = read_c0_config6();
+		/* Clear the old probability value */
+		config6 &= ~(3 << MIPS_CONF6_FTLBP_SHIFT);
 		if (enable)
 			/* Enable FTLB */
-			write_c0_config6(config6 | MIPS_CONF6_FTLBEN);
+			write_c0_config6(config6 |
+					 (calculate_ftlb_probability(c)
+					  << MIPS_CONF6_FTLBP_SHIFT)
+					 | MIPS_CONF6_FTLBEN);
 		else
 			/* Disable FTLB */
 			write_c0_config6(config6 &  ~MIPS_CONF6_FTLBEN);
@@ -757,31 +788,34 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 			c->cputype = CPU_LOONGSON2;
 			__cpu_name[cpu] = "ICT Loongson-2";
 			set_elf_platform(cpu, "loongson2e");
+			set_isa(c, MIPS_CPU_ISA_III);
 			break;
 		case PRID_REV_LOONGSON2F:
 			c->cputype = CPU_LOONGSON2;
 			__cpu_name[cpu] = "ICT Loongson-2";
 			set_elf_platform(cpu, "loongson2f");
+			set_isa(c, MIPS_CPU_ISA_III);
 			break;
 		case PRID_REV_LOONGSON3A:
 			c->cputype = CPU_LOONGSON3;
-			c->writecombine = _CACHE_UNCACHED_ACCELERATED;
 			__cpu_name[cpu] = "ICT Loongson-3";
 			set_elf_platform(cpu, "loongson3a");
+			set_isa(c, MIPS_CPU_ISA_M64R1);
 			break;
 		case PRID_REV_LOONGSON3B_R1:
 		case PRID_REV_LOONGSON3B_R2:
 			c->cputype = CPU_LOONGSON3;
 			__cpu_name[cpu] = "ICT Loongson-3";
 			set_elf_platform(cpu, "loongson3b");
+			set_isa(c, MIPS_CPU_ISA_M64R1);
 			break;
 		}
 
-		set_isa(c, MIPS_CPU_ISA_III);
 		c->options = R4K_OPTS |
 			     MIPS_CPU_FPU | MIPS_CPU_LLSC |
 			     MIPS_CPU_32FPR;
 		c->tlbsize = 64;
+		c->writecombine = _CACHE_UNCACHED_ACCELERATED;
 		break;
 	case PRID_IMP_LOONGSON_32:  /* Loongson-1 */
 		decode_configs(c);

arch/mips/kernel/jump_label.c

@@ -18,31 +18,53 @@
 
 #ifdef HAVE_JUMP_LABEL
 
-#define J_RANGE_MASK ((1ul << 28) - 1)
+/*
+ * Define parameters for the standard MIPS and the microMIPS jump
+ * instruction encoding respectively:
+ *
+ * - the ISA bit of the target, either 0 or 1 respectively,
+ *
+ * - the amount the jump target address is shifted right to fit in the
+ *   immediate field of the machine instruction, either 2 or 1,
+ *
+ * - the mask determining the size of the jump region relative to the
+ *   delay-slot instruction, either 256MB or 128MB,
+ *
+ * - the jump target alignment, either 4 or 2 bytes.
+ */
+#define J_ISA_BIT	IS_ENABLED(CONFIG_CPU_MICROMIPS)
+#define J_RANGE_SHIFT	(2 - J_ISA_BIT)
+#define J_RANGE_MASK	((1ul << (26 + J_RANGE_SHIFT)) - 1)
+#define J_ALIGN_MASK	((1ul << J_RANGE_SHIFT) - 1)
 
 void arch_jump_label_transform(struct jump_entry *e,
 			       enum jump_label_type type)
 {
+	union mips_instruction *insn_p;
 	union mips_instruction insn;
-	union mips_instruction *insn_p =
-		(union mips_instruction *)(unsigned long)e->code;
 
-	/* Jump only works within a 256MB aligned region. */
+	insn_p = (union mips_instruction *)msk_isa16_mode(e->code);
-	BUG_ON((e->target & ~J_RANGE_MASK) != (e->code & ~J_RANGE_MASK));
 
-	/* Target must have 4 byte alignment. */
+	/* Jump only works within an aligned region its delay slot is in. */
-	BUG_ON((e->target & 3) != 0);
+	BUG_ON((e->target & ~J_RANGE_MASK) != ((e->code + 4) & ~J_RANGE_MASK));
+
+	/* Target must have the right alignment and ISA must be preserved. */
+	BUG_ON((e->target & J_ALIGN_MASK) != J_ISA_BIT);
 
 	if (type == JUMP_LABEL_ENABLE) {
-		insn.j_format.opcode = j_op;
+		insn.j_format.opcode = J_ISA_BIT ? mm_j32_op : j_op;
-		insn.j_format.target = (e->target & J_RANGE_MASK) >> 2;
+		insn.j_format.target = e->target >> J_RANGE_SHIFT;
 	} else {
 		insn.word = 0; /* nop */
 	}
 
 	get_online_cpus();
 	mutex_lock(&text_mutex);
-	*insn_p = insn;
+	if (IS_ENABLED(CONFIG_CPU_MICROMIPS)) {
+		insn_p->halfword[0] = insn.word >> 16;
+		insn_p->halfword[1] = insn.word;
+	} else
+		*insn_p = insn;
 
 	flush_icache_range((unsigned long)insn_p,
 			   (unsigned long)insn_p + sizeof(*insn_p));

arch/mips/kernel/rtlx.c

@@ -94,12 +94,12 @@ int rtlx_open(int index, int can_sleep)
 	int ret = 0;
 
 	if (index >= RTLX_CHANNELS) {
-		pr_debug(KERN_DEBUG "rtlx_open index out of range\n");
+		pr_debug("rtlx_open index out of range\n");
 		return -ENOSYS;
 	}
 
 	if (atomic_inc_return(&channel_wqs[index].in_open) > 1) {
-		pr_debug(KERN_DEBUG "rtlx_open channel %d already opened\n", index);
+		pr_debug("rtlx_open channel %d already opened\n", index);
 		ret = -EBUSY;
 		goto out_fail;
 	}

arch/mips/kernel/setup.c

@@ -485,7 +485,7 @@ static void __init bootmem_init(void)
  * NOTE: historically plat_mem_setup did the entire platform initialization.
  *	 This was rather impractical because it meant plat_mem_setup had to
  * get away without any kind of memory allocator.  To keep old code from
- * breaking plat_setup was just renamed to plat_setup and a second platform
+ * breaking plat_setup was just renamed to plat_mem_setup and a second platform
  * initialization hook for anything else was introduced.
  */
 
@@ -493,7 +493,7 @@ static int usermem __initdata;
 
 static int __init early_parse_mem(char *p)
 {
-	unsigned long start, size;
+	phys_t start, size;
 
 	/*
 	 * If a user specifies memory size, we

arch/mips/kernel/signal.c

@@ -658,13 +658,13 @@ static int signal_setup(void)
 		save_fp_context = _save_fp_context;
 		restore_fp_context = _restore_fp_context;
 	} else {
-		save_fp_context = copy_fp_from_sigcontext;
+		save_fp_context = copy_fp_to_sigcontext;
-		restore_fp_context = copy_fp_to_sigcontext;
+		restore_fp_context = copy_fp_from_sigcontext;
 	}
 #endif /* CONFIG_SMP */
 #else
-	save_fp_context = copy_fp_from_sigcontext;;
+	save_fp_context = copy_fp_to_sigcontext;
-	restore_fp_context = copy_fp_to_sigcontext;
+	restore_fp_context = copy_fp_from_sigcontext;
 #endif
 
 	return 0;

arch/mips/lib/memcpy.S

@@ -503,6 +503,7 @@
 	STOREB(t0, NBYTES-2(dst), .Ls_exc_p1\@)
 .Ldone\@:
 	jr	ra
+	 nop
 	.if __memcpy == 1
 	END(memcpy)
 	.set __memcpy, 0

arch/mips/loongson/common/Makefile

@@ -11,7 +11,8 @@ obj-$(CONFIG_PCI) += pci.o
 # Serial port support
 #
 obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_SERIAL_8250) += serial.o
+loongson-serial-$(CONFIG_SERIAL_8250) := serial.o
+obj-y += $(loongson-serial-m) $(loongson-serial-y)
 obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
 obj-$(CONFIG_LOONGSON_MC146818) += rtc.o