Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-25 21:51:40 +00:00
Code Issues Packages Projects Releases Wiki Activity

swiotlb: fix swiotlb_bounce() to do partial sync's correctly

Browse Source 
In current code, swiotlb_bounce() may do partial sync's correctly in
some circumstances, but may incorrectly fail in other circumstances.
The failure cases require both of these to be true:

1) swiotlb_align_offset() returns a non-zero "offset" value
2) the tlb_addr of the partial sync area points into the first
"offset" bytes of the _second_ or subsequent swiotlb slot allocated
for the mapping

Code added in commit 868c9ddc18 ("swiotlb: add overflow checks
to swiotlb_bounce") attempts to WARN on the invalid case where
tlb_addr points into the first "offset" bytes of the _first_
allocated slot. But there's no way for swiotlb_bounce() to distinguish
the first slot from the second and subsequent slots, so the WARN
can be triggered incorrectly when #2 above is true.

Related, current code calculates an adjustment to the orig_addr stored
in the swiotlb slot. The adjustment compensates for the difference
in the tlb_addr used for the partial sync vs. the tlb_addr for the full
mapping. The adjustment is stored in the local variable tlb_offset.
But when #1 and #2 above are true, it's valid for this adjustment to
be negative. In such case the arithmetic to adjust orig_addr produces
the wrong result due to tlb_offset being declared as unsigned.

Fix these problems by removing the over-constraining validations added
in 868c9ddc18. Change the declaration of tlb_offset to be signed
instead of unsigned so the adjustment arithmetic works correctly.

Tested with a test-only hack to how swiotlb_tbl_map_single() calls
swiotlb_bounce(). Instead of calling swiotlb_bounce() just once
for the entire mapped area, do a loop with each iteration doing
only a 128 byte partial sync until the entire mapped area is
sync'ed. Then with swiotlb=force on the kernel boot line, run a
variety of raw disk writes followed by read and verification of
all bytes of the written data. The storage device has DMA
min_align_mask set, and the writes are done with a variety of
original buffer memory address alignments and overall buffer
sizes. For many of the combinations, current code triggers the
WARN statements, or the data verification fails. With the fixes,
no WARNs occur and all verifications pass.

Fixes: 5f89468e2f ("swiotlb: manipulate orig_addr when tlb_addr has offset")
Fixes: 868c9ddc18 ("swiotlb: add overflow checks to swiotlb_bounce")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Dominique Martinet <dominique.martinet@atmark-techno.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This commit is contained in:
Michael Kelley 2024-03-26 20:45:48 -07:00 committed by Christoph Hellwig
parent af133562d5
commit e8068f2d75
1 changed files with 13 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
kernel/dma/swiotlb.c
View File

@ -863,27 +863,23 @@ static void swiotlb_bounce(struct device *dev, phys_addr_t tlb_addr, size_t size
size_t alloc_size = mem->slots[index].alloc_size;
unsigned long pfn = PFN_DOWN(orig_addr);
unsigned char *vaddr = mem->vaddr + tlb_addr - mem->start;
unsigned int tlb_offset, orig_addr_offset;
int tlb_offset;
if (orig_addr == INVALID_PHYS_ADDR)
return;
tlb_offset = tlb_addr & (IO_TLB_SIZE - 1);
orig_addr_offset = swiotlb_align_offset(dev, 0, orig_addr);
if (tlb_offset < orig_addr_offset) {
dev_WARN_ONCE(dev, 1,
"Access before mapping start detected. orig offset %u, requested offset %u.\n",
orig_addr_offset, tlb_offset);
return;
}
tlb_offset -= orig_addr_offset;
if (tlb_offset > alloc_size) {
dev_WARN_ONCE(dev, 1,
"Buffer overflow detected. Allocation size: %zu. Mapping size: %zu+%u.\n",
alloc_size, size, tlb_offset);
return;
}
/*
* It's valid for tlb_offset to be negative. This can happen when the
* "offset" returned by swiotlb_align_offset() is non-zero, and the
* tlb_addr is pointing within the first "offset" bytes of the second
* or subsequent slots of the allocated swiotlb area. While it's not
* valid for tlb_addr to be pointing within the first "offset" bytes
* of the first slot, there's no way to check for such an error since
* this function can't distinguish the first slot from the second and
* subsequent slots.
*/
tlb_offset = (tlb_addr & (IO_TLB_SIZE - 1)) -
swiotlb_align_offset(dev, 0, orig_addr);
orig_addr += tlb_offset;
alloc_size -= tlb_offset;