Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-25 21:51:40 +00:00
Code Issues Packages Projects Releases Wiki Activity

ARM: SoC fixes for 6.3, part 2

Browse Source 
As usual, most of the bug fixes address issues in the devicetree files,
 and out of these, most are for the Qualcomm and NXP platforms, including:
 
  - A missing "reserved-memory" property on LG G Watch R that
    is needed to prevent clashing with firmware
 
  - Annotations for cache coherency on multiple machines
 
  - Corrections for pinctrl, regulator, clock, iommu and power domain
    properties for i.MX and Qualcomm to correctly reflect the
    hardware settings
 
  - Firmware file names on multiple machines
    SA8540P Ride board
 
  - An incompatible change to the qcom vadc driver requires adding
    individual labels
 
  - Fix EQoS PHY reset GPIO by dropping the deprecated/wrong property
    and switch to the new bindings.
 
  - A fix for PCI bus address translation Tegra194 and Tegra234.
 
 There are also a couple of device driver fixes, addressing
 
  - A race condition in the amdtee driver
 
  - A performance regression in the Qualcomm 'llcc' driver
 
  - An unitialized variable use NXP i.MX "weim" driver
 
  - Error handling issues in Qualcomm "rmtfs", and "scm"
    drivers and the Arm scmi firmware driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmQeF5sACgkQmmx57+YA
 GNmbGhAAigQgZjlV8Y4IIguJ2WjPcufD9b30j/iWp/5iFFCLlHex409FM+cYv6wo
 oSqEpplW/D2UoVEmODv9JGnknwgg6NZLq0pMxBuTC+vUPRwWH8DPKSkijMVcEZOd
 MmRB8kMwPaQhXPy5lWHfcGtrRISekqQf1rrIhQQN1bdWw2gIxGNN63UXJJIZDsTQ
 tno85BLiWGIrwvmqTN93ecv0lwsA2xkgDAxA0eWSWmy4cjLNzzRQ0QuAtcgSsV/V
 5E+R6JWidmdCMIkjU6XD0jR4c2oCUoMjXZcUDwkBP1yvA0Eev+xBdJciM/DZemKL
 pl2iJThmcLu5qkuEqREi0UexMYgnoqg8KklPPeNdJTmLGeWh05aw36RYkqMXnyMw
 S4hqJS0jH/wmRomUtnJhMCL0HCJ4QrTD10kw1Rt67gRy2weGtu7X4fEmqIOESG8G
 3XikL/udHiLDZ6Nk9bAE7xdmIAJao2RA8t5wJhActVLV9y5H6Fv+EbzULBUBmNew
 9v0XqgcuW66T+OilRm7pR5jYcUdOUKcq/4lC+P+nVAsDXEgT2BADRVk84gY+WRkz
 MwAeqeNhZtJsEA/Ym+JLFb4vAHr6v3S3kqHlWaDtyBOeWAsU0EDiXO47iabdvGcc
 4NR9jn+Js7npSpGJKkopiRIHPyAYbukMkTKtYtsuucLnqZF2Znw=
 =rKwy
 -----END PGP SIGNATURE-----

Merge tag 'arm-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "As usual, most of the bug fixes address issues in the devicetree
  files, and out of these, most are for the Qualcomm and NXP platforms,
  including:

   - A missing 'reserved-memory' property on LG G Watch R that is needed
     to prevent clashing with firmware

   - Annotations for cache coherency on multiple machines

   - Corrections for pinctrl, regulator, clock, iommu and power domain
     properties for i.MX and Qualcomm to correctly reflect the hardware
     settings

   - Firmware file names on multiple machines SA8540P Ride board

   - An incompatible change to the qcom vadc driver requires adding
     individual labels

   - Fix EQoS PHY reset GPIO by dropping the deprecated/wrong property
     and switch to the new bindings.

   - A fix for PCI bus address translation Tegra194 and Tegra234.

  There are also a couple of device driver fixes, addressing:

   - A race condition in the amdtee driver

   - A performance regression in the Qualcomm 'llcc' driver

   - An unitialized variable use NXP i.MX 'weim' driver

   - Error handling issues in Qualcomm 'rmtfs', and 'scm' drivers and
     the Arm scmi firmware driver"

* tag 'arm-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
  arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-on
  arm64: dts: imx93: add missing #address-cells and #size-cells to i2c nodes
  bus: imx-weim: fix branch condition evaluates to a garbage value
  arm64: dts: imx8mn: specify #sound-dai-cells for SAI nodes
  ARM: dts: imx6sl: tolino-shine2hd: fix usbotg1 pinctrl
  ARM: dts: imx6sll: e60k02: fix usbotg1 pinctrl
  ARM: dts: imx6sll: e70k02: fix usbotg1 pinctrl
  arm64: dts: imx93: Fix eqos properties
  arm64: dts: imx8mp: Fix LCDIF2 node clock order
  arm64: dts: imx8mm-nitrogen-r2: fix WM8960 clock name
  arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio
  firmware: qcom: scm: fix bogus irq error at probe
  arm64: dts: qcom: sm8550: Mark UFS controller as cache coherent
  arm64: dts: qcom: sa8540p-ride: correct name of remoteproc_nsp0 firmware
  arm64: dts: qcom: sm8450: Mark UFS controller as cache coherent
  arm64: dts: qcom: sm8350: Mark UFS controller as cache coherent
  arm64: dts: qcom: sm8550: fix LPASS pinctrl slew base address
  ...
This commit is contained in:
Linus Torvalds 2023-03-24 15:38:13 -07:00
commit e76db6e50c
39 changed files with 212 additions and 145 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/arm/boot/dts/e60k02.dtsi
View File

@ -311,6 +311,7 @@
&usbotg1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg1>;
disable-over-current;
srp-disable;
hnp-disable;

1
arch/arm/boot/dts/e70k02.dtsi
View File

@ -321,6 +321,7 @@
&usbotg1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg1>;
disable-over-current;
srp-disable;
hnp-disable;

1
arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
View File

@ -625,6 +625,7 @@
&usbotg1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg1>;
disable-over-current;
srp-disable;
hnp-disable;

10
arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
View File

@ -27,6 +27,16 @@
};
reserved-memory {
sbl_region: sbl@2f00000 {
reg = <0x02f00000 0x100000>;
no-map;
};
external_image_region: external-image@3100000 {
reg = <0x03100000 0x200000>;
no-map;
};
adsp_region: adsp@3300000 {
reg = <0x03300000 0x1400000>;
no-map;

12
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
View File

@ -56,14 +56,10 @@
};
&enetc_port2 {
nvmem-cells = <&base_mac_address 2>;
nvmem-cell-names = "mac-address";
status = "okay";
};
&enetc_port3 {
nvmem-cells = <&base_mac_address 3>;
nvmem-cell-names = "mac-address";
status = "okay";
};
@ -84,8 +80,6 @@
managed = "in-band-status";
phy-handle = <&qsgmii_phy0>;
phy-mode = "qsgmii";
nvmem-cells = <&base_mac_address 4>;
nvmem-cell-names = "mac-address";
status = "okay";
};
@ -94,8 +88,6 @@
managed = "in-band-status";
phy-handle = <&qsgmii_phy1>;
phy-mode = "qsgmii";
nvmem-cells = <&base_mac_address 5>;
nvmem-cell-names = "mac-address";
status = "okay";
};
@ -104,8 +96,6 @@
managed = "in-band-status";
phy-handle = <&qsgmii_phy2>;
phy-mode = "qsgmii";
nvmem-cells = <&base_mac_address 6>;
nvmem-cell-names = "mac-address";
status = "okay";
};
@ -114,8 +104,6 @@
managed = "in-band-status";
phy-handle = <&qsgmii_phy3>;
phy-mode = "qsgmii";
nvmem-cells = <&base_mac_address 7>;
nvmem-cell-names = "mac-address";
status = "okay";
};

2
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
View File

@ -55,7 +55,5 @@
&enetc_port1 {
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
nvmem-cells = <&base_mac_address 0>;
nvmem-cell-names = "mac-address";
status = "okay";
};

8
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
View File

@ -36,14 +36,10 @@
};
&enetc_port2 {
nvmem-cells = <&base_mac_address 2>;
nvmem-cell-names = "mac-address";
status = "okay";
};
&enetc_port3 {
nvmem-cells = <&base_mac_address 3>;
nvmem-cell-names = "mac-address";
status = "okay";
};
@ -56,8 +52,6 @@
managed = "in-band-status";
phy-handle = <&phy0>;
phy-mode = "sgmii";
nvmem-cells = <&base_mac_address 0>;
nvmem-cell-names = "mac-address";
status = "okay";
};
@ -66,8 +60,6 @@
managed = "in-band-status";
phy-handle = <&phy1>;
phy-mode = "sgmii";
nvmem-cells = <&base_mac_address 1>;
nvmem-cell-names = "mac-address";
status = "okay";
};

2
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
View File

@ -43,7 +43,5 @@
&enetc_port1 {
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
nvmem-cells = <&base_mac_address 1>;
nvmem-cell-names = "mac-address";
status = "okay";
};

17
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
View File

@ -92,8 +92,6 @@
phy-handle = <&phy0>;
phy-mode = "sgmii";
managed = "in-band-status";
nvmem-cells = <&base_mac_address 0>;
nvmem-cell-names = "mac-address";
status = "okay";
};
@ -156,21 +154,6 @@
label = "bootloader environment";
};
};
otp-1 {
compatible = "user-otp";
nvmem-layout {
compatible = "kontron,sl28-vpd";
serial_number: serial-number {
};
base_mac_address: base-mac-address {
#nvmem-cell-cells = <1>;
};
};
};
};
};

2
arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
View File

@ -117,7 +117,7 @@ lsio_subsys: bus@5d000000 {
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>,
<&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>;
clock-names = "fspi", "fspi_en";
clock-names = "fspi_en", "fspi";
power-domains = <&pd IMX_SC_R_FSPI_0>;
status = "disabled";
};

5
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
View File

@ -121,8 +121,6 @@
phy-handle = <&ethphy0>;
nvmem-cells = <&fec_mac1>;
nvmem-cell-names = "mac-address";
snps,reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
snps,reset-delays-us = <10 20 200000>;
status = "okay";
mdio {
@ -136,6 +134,9 @@
eee-broken-1000t;
qca,disable-smarteee;
qca,disable-hibernation-mode;
reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
reset-assert-us = <20>;
reset-deassert-us = <200000>;
vddio-supply = <&vddio0>;
vddio0: vddio-regulator {

2
arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
View File

@ -247,7 +247,7 @@
compatible = "wlf,wm8960";
reg = <0x1a>;
clocks = <&clk IMX8MM_CLK_SAI1_ROOT>;
clock-names = "mclk1";
clock-names = "mclk";
wlf,shared-lrclk;
#sound-dai-cells = <0>;
};

5
arch/arm64/boot/dts/freescale/imx8mn.dtsi
View File

@ -296,6 +296,7 @@
sai2: sai@30020000 {
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x30020000 0x10000>;
#sound-dai-cells = <0>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI2_IPG>,
<&clk IMX8MN_CLK_DUMMY>,
@ -310,6 +311,7 @@
sai3: sai@30030000 {
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x30030000 0x10000>;
#sound-dai-cells = <0>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI3_IPG>,
<&clk IMX8MN_CLK_DUMMY>,
@ -324,6 +326,7 @@
sai5: sai@30050000 {
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x30050000 0x10000>;
#sound-dai-cells = <0>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI5_IPG>,
<&clk IMX8MN_CLK_DUMMY>,
@ -340,6 +343,7 @@
sai6: sai@30060000 {
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x30060000 0x10000>;
#sound-dai-cells = <0>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI6_IPG>,
<&clk IMX8MN_CLK_DUMMY>,
@ -397,6 +401,7 @@
sai7: sai@300b0000 {
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x300b0000 0x10000>;
#sound-dai-cells = <0>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI7_IPG>,
<&clk IMX8MN_CLK_DUMMY>,

4
arch/arm64/boot/dts/freescale/imx8mp.dtsi
View File

@ -1131,8 +1131,8 @@
reg = <0x32e90000 0x238>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>,
<&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
<&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
<&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
<&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
clock-names = "pix", "axi", "disp_axi";
assigned-clocks = <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>,
<&clk IMX8MP_VIDEO_PLL1>;

24
arch/arm64/boot/dts/freescale/imx93.dtsi
View File

@ -164,6 +164,8 @@
lpi2c1: i2c@44340000 {
compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x44340000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPI2C1_GATE>,
<&clk IMX93_CLK_BUS_AON>;
@ -174,6 +176,8 @@
lpi2c2: i2c@44350000 {
compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x44350000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPI2C2_GATE>,
<&clk IMX93_CLK_BUS_AON>;
@ -343,6 +347,8 @@
lpi2c3: i2c@42530000 {
compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x42530000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPI2C3_GATE>,
<&clk IMX93_CLK_BUS_WAKEUP>;
@ -353,6 +359,8 @@
lpi2c4: i2c@42540000 {
compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x42540000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPI2C4_GATE>,
<&clk IMX93_CLK_BUS_WAKEUP>;
@ -455,6 +463,8 @@
lpi2c5: i2c@426b0000 {
compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x426b0000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPI2C5_GATE>,
<&clk IMX93_CLK_BUS_WAKEUP>;
@ -465,6 +475,8 @@
lpi2c6: i2c@426c0000 {
compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x426c0000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPI2C6_GATE>,
<&clk IMX93_CLK_BUS_WAKEUP>;
@ -475,6 +487,8 @@
lpi2c7: i2c@426d0000 {
compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x426d0000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPI2C7_GATE>,
<&clk IMX93_CLK_BUS_WAKEUP>;
@ -485,6 +499,8 @@
lpi2c8: i2c@426e0000 {
compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x426e0000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPI2C8_GATE>,
<&clk IMX93_CLK_BUS_WAKEUP>;
@ -580,9 +596,9 @@
eqos: ethernet@428a0000 {
compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a";
reg = <0x428a0000 0x10000>;
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "eth_wake_irq", "macirq";
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq", "eth_wake_irq";
clocks = <&clk IMX93_CLK_ENET_QOS_GATE>,
<&clk IMX93_CLK_ENET_QOS_GATE>,
<&clk IMX93_CLK_ENET_TIMER2>,
@ -595,7 +611,7 @@
<&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
assigned-clock-rates = <100000000>, <250000000>;
intf_mode = <&wakeupmix_gpr 0x28>;
clk_csr = <0>;
snps,clk-csr = <0>;
status = "disabled";
};

2
arch/arm64/boot/dts/nvidia/tegra194.dtsi
View File

@ -22,7 +22,7 @@
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0x0 0x0 0x40000000>;
ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
apbmisc: misc@100000 {
compatible = "nvidia,tegra194-misc";

2
arch/arm64/boot/dts/nvidia/tegra234.dtsi
View File

@ -20,7 +20,7 @@
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0x0 0x0 0x40000000>;
ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
misc@100000 {
compatible = "nvidia,tegra234-misc";

4
arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
View File

@ -33,7 +33,3 @@
&gpio_leds_default {
pins = "gpio81", "gpio82", "gpio83";
};
&sim_ctrl_default {
pins = "gpio1", "gpio2";
};

28
arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
View File

@ -25,6 +25,11 @@
gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
};
&mpss {
pinctrl-0 = <&sim_ctrl_default>;
pinctrl-names = "default";
};
&button_default {
pins = "gpio37";
bias-pull-down;
@ -34,6 +39,25 @@
pins = "gpio20", "gpio21", "gpio22";
};
&sim_ctrl_default {
pins = "gpio1", "gpio2";
/* This selects the external SIM card slot by default */
&msmgpio {
sim_ctrl_default: sim-ctrl-default-state {
esim-sel-pins {
pins = "gpio0", "gpio3";
bias-disable;
output-low;
};
sim-en-pins {
pins = "gpio1";
bias-disable;
output-low;
};
sim-sel-pins {
pins = "gpio2";
bias-disable;
output-high;
};
};
};

10
arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
View File

@ -92,9 +92,6 @@
};
&mpss {
pinctrl-0 = <&sim_ctrl_default>;
pinctrl-names = "default";
status = "okay";
};
@ -240,11 +237,4 @@
drive-strength = <2>;
bias-disable;
};
sim_ctrl_default: sim-ctrl-default-state {
function = "gpio";
drive-strength = <2>;
bias-disable;
output-low;
};
};

2
arch/arm64/boot/dts/qcom/sa8540p-ride.dts
View File

@ -241,7 +241,7 @@
};
&remoteproc_nsp0 {
firmware-name = "qcom/sa8540p/cdsp.mbn";
firmware-name = "qcom/sa8540p/cdsp0.mbn";
status = "okay";
};

2
arch/arm64/boot/dts/qcom/sc7280.dtsi
View File

@ -2131,6 +2131,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pcie1_clkreq_n>;
dma-coherent;
iommus = <&apps_smmu 0x1c80 0x1>;
iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,

27
arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
View File

@ -370,6 +370,7 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-always-on;
};
vreg_s11b: smps11 {
@ -377,6 +378,7 @@
regulator-min-microvolt = <1272000>;
regulator-max-microvolt = <1272000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-always-on;
};
vreg_s12b: smps12 {
@ -384,6 +386,7 @@
regulator-min-microvolt = <984000>;
regulator-max-microvolt = <984000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-always-on;
};
vreg_l3b: ldo3 {
@ -441,6 +444,7 @@
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
regulator-always-on;
};
};
@ -772,75 +776,88 @@
pmic-die-temp@3 {
reg = <PMK8350_ADC7_DIE_TEMP>;
qcom,pre-scaling = <1 1>;
label = "pmk8350_die_temp";
};
xo-therm@44 {
reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
qcom,hw-settle-time = <200>;
qcom,ratiometric;
label = "pmk8350_xo_therm";
};
pmic-die-temp@103 {
reg = <PM8350_ADC7_DIE_TEMP(1)>;
qcom,pre-scaling = <1 1>;
label = "pmc8280_1_die_temp";
};
sys-therm@144 {
reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
qcom,hw-settle-time = <200>;
qcom,ratiometric;
label = "sys_therm1";
};
sys-therm@145 {
reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
qcom,hw-settle-time = <200>;
qcom,ratiometric;
label = "sys_therm2";
};
sys-therm@146 {
reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
qcom,hw-settle-time = <200>;
qcom,ratiometric;
label = "sys_therm3";
};
sys-therm@147 {
reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
qcom,hw-settle-time = <200>;
qcom,ratiometric;
label = "sys_therm4";
};
pmic-die-temp@303 {
reg = <PM8350_ADC7_DIE_TEMP(3)>;
qcom,pre-scaling = <1 1>;
label = "pmc8280_2_die_temp";
};
sys-therm@344 {
reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
qcom,hw-settle-time = <200>;
qcom,ratiometric;
label = "sys_therm5";
};
sys-therm@345 {
reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
qcom,hw-settle-time = <200>;
qcom,ratiometric;
label = "sys_therm6";
};
sys-therm@346 {
reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
qcom,hw-settle-time = <200>;
qcom,ratiometric;
label = "sys_therm7";
};
sys-therm@347 {
reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
qcom,hw-settle-time = <200>;
qcom,ratiometric;
label = "sys_therm8";
};
pmic-die-temp@403 {
reg = <PMR735A_ADC7_DIE_TEMP>;
qcom,pre-scaling = <1 1>;
label = "pmr735a_die_temp";
};
};
@ -884,9 +901,9 @@
"VA DMIC0", "MIC BIAS1",
"VA DMIC1", "MIC BIAS1",
"VA DMIC2", "MIC BIAS3",
"TX DMIC0", "MIC BIAS1",
"TX DMIC1", "MIC BIAS2",
"TX DMIC2", "MIC BIAS3",
"VA DMIC0", "VA MIC BIAS1",
"VA DMIC1", "VA MIC BIAS1",
"VA DMIC2", "VA MIC BIAS3",
"TX SWR_ADC1", "ADC2_OUTPUT";
wcd-playback-dai-link {
@ -937,7 +954,7 @@
va-dai-link {
link-name = "VA Capture";
cpu {
sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
};
platform {
@ -1062,7 +1079,7 @@
vdd-micb-supply = <&vreg_s10b>;
qcom,dmic-sample-rate = <600000>;
qcom,dmic-sample-rate = <4800000>;
status = "okay";
};

18
arch/arm64/boot/dts/qcom/sc8280xp.dtsi
View File

@ -2504,12 +2504,12 @@
qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0B 0x01 0x00>;
qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0B 0x00 0x00>;
qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
qcom,ports-hstart = /bits/ 8 <0xff 0x03 0x00 0xff 0xff>;
qcom,ports-hstop = /bits/ 8 <0xff 0x06 0x0f 0xff 0xff>;
qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff>;
qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
#sound-dai-cells = <1>;
#address-cells = <2>;
@ -2600,7 +2600,7 @@
<&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "core", "wake";
clocks = <&vamacro>;
clocks = <&txmacro>;
clock-names = "iface";
label = "TX";
#sound-dai-cells = <1>;
@ -2609,15 +2609,15 @@
qcom,din-ports = <4>;
qcom,dout-ports = <0>;
qcom,ports-sinterval-low = /bits/ 8 <0x01 0x03 0x03 0x03>;
qcom,ports-offset1 = /bits/ 8 <0x01 0x00 0x02 0x01>;
qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>;
qcom,ports-offset1 = /bits/ 8 <0x01 0x00 0x02 0x00>;
qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>;
qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>;
qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>;
qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>;
qcom,ports-word-length = /bits/ 8 <0xff 0x00 0xff 0xff>;
qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>;
qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>;
qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00 0x00>;
qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00 0x01>;
status = "disabled";
};

1
arch/arm64/boot/dts/qcom/sm6115.dtsi
View File

@ -1078,6 +1078,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};

1
arch/arm64/boot/dts/qcom/sm6375.dtsi
View File

@ -1209,6 +1209,7 @@
clock-names = "xo";
power-domains = <&rpmpd SM6375_VDDCX>;
power-domain-names = "cx";
memory-region = <&pil_cdsp_mem>;

4
arch/arm64/boot/dts/qcom/sm8150.dtsi
View File

@ -1826,7 +1826,7 @@
"slave_q2a",
"tbu";
iommus = <&apps_smmu 0x1d80 0x7f>;
iommus = <&apps_smmu 0x1d80 0x3f>;
iommu-map = <0x0 &apps_smmu 0x1d80 0x1>,
<0x100 &apps_smmu 0x1d81 0x1>;
@ -1925,7 +1925,7 @@
assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
assigned-clock-rates = <19200000>;
iommus = <&apps_smmu 0x1e00 0x7f>;
iommus = <&apps_smmu 0x1e00 0x3f>;
iommu-map = <0x0 &apps_smmu 0x1e00 0x1>,
<0x100 &apps_smmu 0x1e01 0x1>;

2
arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts
View File

@ -625,6 +625,6 @@
};
&venus {
firmware-name = "qcom/sm8250/elish/venus.mbn";
firmware-name = "qcom/sm8250/xiaomi/elish/venus.mbn";
status = "okay";
};

1
arch/arm64/boot/dts/qcom/sm8350.dtsi
View File

@ -1664,6 +1664,7 @@
power-domains = <&gcc UFS_PHY_GDSC>;
iommus = <&apps_smmu 0xe0 0x0>;
dma-coherent;
clock-names =
"core_clk",

5
arch/arm64/boot/dts/qcom/sm8450.dtsi
View File

@ -2143,8 +2143,8 @@
<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&vamacro>;
clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
assigned-clock-rates = <19200000>, <19200000>;
#clock-cells = <0>;
@ -4003,6 +4003,7 @@
power-domains = <&gcc UFS_PHY_GDSC>;
iommus = <&apps_smmu 0xe0 0x0>;
dma-coherent;
interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;

49
arch/arm64/boot/dts/qcom/sm8550.dtsi
View File

@ -66,7 +66,7 @@
CPU0: cpu@0 {
device_type = "cpu";
compatible = "qcom,kryo";
compatible = "arm,cortex-a510";
reg = <0 0>;
enable-method = "psci";
next-level-cache = <&L2_0>;
@ -89,7 +89,7 @@
CPU1: cpu@100 {
device_type = "cpu";
compatible = "qcom,kryo";
compatible = "arm,cortex-a510";
reg = <0 0x100>;
enable-method = "psci";
next-level-cache = <&L2_100>;
@ -108,7 +108,7 @@
CPU2: cpu@200 {
device_type = "cpu";
compatible = "qcom,kryo";
compatible = "arm,cortex-a510";
reg = <0 0x200>;
enable-method = "psci";
next-level-cache = <&L2_200>;
@ -127,7 +127,7 @@
CPU3: cpu@300 {
device_type = "cpu";
compatible = "qcom,kryo";
compatible = "arm,cortex-a715";
reg = <0 0x300>;
enable-method = "psci";
next-level-cache = <&L2_300>;
@ -146,7 +146,7 @@
CPU4: cpu@400 {
device_type = "cpu";
compatible = "qcom,kryo";
compatible = "arm,cortex-a715";
reg = <0 0x400>;
enable-method = "psci";
next-level-cache = <&L2_400>;
@ -165,7 +165,7 @@
CPU5: cpu@500 {
device_type = "cpu";
compatible = "qcom,kryo";
compatible = "arm,cortex-a710";
reg = <0 0x500>;
enable-method = "psci";
next-level-cache = <&L2_500>;
@ -184,7 +184,7 @@
CPU6: cpu@600 {
device_type = "cpu";
compatible = "qcom,kryo";
compatible = "arm,cortex-a710";
reg = <0 0x600>;
enable-method = "psci";
next-level-cache = <&L2_600>;
@ -203,7 +203,7 @@
CPU7: cpu@700 {
device_type = "cpu";
compatible = "qcom,kryo";
compatible = "arm,cortex-x3";
reg = <0 0x700>;
enable-method = "psci";
next-level-cache = <&L2_700>;
@ -1905,6 +1905,7 @@
required-opps = <&rpmhpd_opp_nom>;
iommus = <&apps_smmu 0x60 0x0>;
dma-coherent;
interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
@ -1997,7 +1998,7 @@
lpass_tlmm: pinctrl@6e80000 {
compatible = "qcom,sm8550-lpass-lpi-pinctrl";
reg = <0 0x06e80000 0 0x20000>,
<0 0x0725a000 0 0x10000>;
<0 0x07250000 0 0x10000>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&lpass_tlmm 0 0 23>;
@ -2691,7 +2692,7 @@
pins = "gpio28", "gpio29";
function = "qup1_se0";
drive-strength = <2>;
bias-pull-up;
bias-pull-up = <2200>;
};
qup_i2c1_data_clk: qup-i2c1-data-clk-state {
@ -2699,7 +2700,7 @@
pins = "gpio32", "gpio33";
function = "qup1_se1";
drive-strength = <2>;
bias-pull-up;
bias-pull-up = <2200>;
};
qup_i2c2_data_clk: qup-i2c2-data-clk-state {
@ -2707,7 +2708,7 @@
pins = "gpio36", "gpio37";
function = "qup1_se2";
drive-strength = <2>;
bias-pull-up;
bias-pull-up = <2200>;
};
qup_i2c3_data_clk: qup-i2c3-data-clk-state {
@ -2715,7 +2716,7 @@
pins = "gpio40", "gpio41";
function = "qup1_se3";
drive-strength = <2>;
bias-pull-up;
bias-pull-up = <2200>;
};
qup_i2c4_data_clk: qup-i2c4-data-clk-state {
@ -2723,7 +2724,7 @@
pins = "gpio44", "gpio45";
function = "qup1_se4";
drive-strength = <2>;
bias-pull-up;
bias-pull-up = <2200>;
};
qup_i2c5_data_clk: qup-i2c5-data-clk-state {
@ -2731,7 +2732,7 @@
pins = "gpio52", "gpio53";
function = "qup1_se5";
drive-strength = <2>;
bias-pull-up;
bias-pull-up = <2200>;
};
qup_i2c6_data_clk: qup-i2c6-data-clk-state {
@ -2739,7 +2740,7 @@
pins = "gpio48", "gpio49";
function = "qup1_se6";
drive-strength = <2>;
bias-pull-up;
bias-pull-up = <2200>;
};
qup_i2c8_data_clk: qup-i2c8-data-clk-state {
@ -2747,14 +2748,14 @@
pins = "gpio57";
function = "qup2_se0_l1_mira";
drive-strength = <2>;
bias-pull-up;
bias-pull-up = <2200>;
};
sda-pins {
pins = "gpio56";
function = "qup2_se0_l0_mira";
drive-strength = <2>;
bias-pull-up;
bias-pull-up = <2200>;
};
};
@ -2763,7 +2764,7 @@
pins = "gpio60", "gpio61";
function = "qup2_se1";
drive-strength = <2>;
bias-pull-up;
bias-pull-up = <2200>;
};
qup_i2c10_data_clk: qup-i2c10-data-clk-state {
@ -2771,7 +2772,7 @@
pins = "gpio64", "gpio65";
function = "qup2_se2";
drive-strength = <2>;
bias-pull-up;
bias-pull-up = <2200>;
};
qup_i2c11_data_clk: qup-i2c11-data-clk-state {
@ -2779,7 +2780,7 @@
pins = "gpio68", "gpio69";
function = "qup2_se3";
drive-strength = <2>;
bias-pull-up;
bias-pull-up = <2200>;
};
qup_i2c12_data_clk: qup-i2c12-data-clk-state {
@ -2787,7 +2788,7 @@
pins = "gpio2", "gpio3";
function = "qup2_se4";
drive-strength = <2>;
bias-pull-up;
bias-pull-up = <2200>;
};
qup_i2c13_data_clk: qup-i2c13-data-clk-state {
@ -2795,7 +2796,7 @@
pins = "gpio80", "gpio81";
function = "qup2_se5";
drive-strength = <2>;
bias-pull-up;
bias-pull-up = <2200>;
};
qup_i2c15_data_clk: qup-i2c15-data-clk-state {
@ -2803,7 +2804,7 @@
pins = "gpio72", "gpio106";
function = "qup2_se7";
drive-strength = <2>;
bias-pull-up;
bias-pull-up = <2200>;
};
qup_spi0_cs: qup-spi0-cs-state {

2
drivers/bus/imx-weim.c
View File

@ -204,8 +204,8 @@ static int weim_parse_dt(struct platform_device *pdev)
const struct of_device_id *of_id = of_match_device(weim_id_table,
&pdev->dev);
const struct imx_weim_devtype *devtype = of_id->data;
int ret = 0, have_child = 0;
struct device_node *child;
int ret, have_child = 0;
struct weim_priv *priv;
void __iomem *base;
u32 reg;

3
drivers/firmware/arm_scmi/bus.c
View File

@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/device.h>
#include <linux/of.h>
#include "common.h"
@ -436,7 +435,7 @@ struct scmi_device *scmi_device_create(struct device_node *np,
/* Nothing to do. */
if (!phead) {
mutex_unlock(&scmi_requested_devices_mtx);
return scmi_dev;
return NULL;
}
/* Walk the list of requested devices for protocol and create them */

14
drivers/firmware/arm_scmi/driver.c
View File

@ -2221,8 +2221,8 @@ static int __scmi_xfer_info_init(struct scmi_info *sinfo,
hash_init(info->pending_xfers);
/* Allocate a bitmask sized to hold MSG_TOKEN_MAX tokens */
info->xfer_alloc_table = devm_kcalloc(dev, BITS_TO_LONGS(MSG_TOKEN_MAX),
sizeof(long), GFP_KERNEL);
info->xfer_alloc_table = devm_bitmap_zalloc(dev, MSG_TOKEN_MAX,
GFP_KERNEL);
if (!info->xfer_alloc_table)
return -ENOMEM;
@ -2657,6 +2657,7 @@ static int scmi_probe(struct platform_device *pdev)
struct scmi_handle *handle;
const struct scmi_desc *desc;
struct scmi_info *info;
bool coex = IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT_COEX);
struct device *dev = &pdev->dev;
struct device_node *child, *np = dev->of_node;
@ -2731,16 +2732,13 @@ static int scmi_probe(struct platform_device *pdev)
dev_warn(dev, "Failed to setup SCMI debugfs.\n");
if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT)) {
bool coex =
IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT_COEX);
ret = scmi_debugfs_raw_mode_setup(info);
if (!coex) {
if (ret)
goto clear_dev_req_notifier;
/* Bail out anyway when coex enabled */
return ret;
/* Bail out anyway when coex disabled. */
return 0;
}
/* Coex enabled, carry on in any case. */
@ -2764,6 +2762,8 @@ static int scmi_probe(struct platform_device *pdev)
ret = scmi_protocol_acquire(handle, SCMI_PROTOCOL_BASE);
if (ret) {
dev_err(dev, "unable to communicate with SCMI\n");
if (coex)
return 0;
goto notification_exit;
}

37
drivers/firmware/arm_scmi/mailbox.c
View File

@ -52,6 +52,39 @@ static bool mailbox_chan_available(struct device_node *of_node, int idx)
"#mbox-cells", idx, NULL);
}
static int mailbox_chan_validate(struct device *cdev)
{
int num_mb, num_sh, ret = 0;
struct device_node *np = cdev->of_node;
num_mb = of_count_phandle_with_args(np, "mboxes", "#mbox-cells");
num_sh = of_count_phandle_with_args(np, "shmem", NULL);
/* Bail out if mboxes and shmem descriptors are inconsistent */
if (num_mb <= 0 || num_sh > 2 || num_mb != num_sh) {
dev_warn(cdev, "Invalid channel descriptor for '%s'\n",
of_node_full_name(np));
return -EINVAL;
}
if (num_sh > 1) {
struct device_node *np_tx, *np_rx;
np_tx = of_parse_phandle(np, "shmem", 0);
np_rx = of_parse_phandle(np, "shmem", 1);
/* SCMI Tx and Rx shared mem areas have to be distinct */
if (!np_tx || !np_rx || np_tx == np_rx) {
dev_warn(cdev, "Invalid shmem descriptor for '%s'\n",
of_node_full_name(np));
ret = -EINVAL;
}
of_node_put(np_tx);
of_node_put(np_rx);
}
return ret;
}
static int mailbox_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
bool tx)
{
@ -64,6 +97,10 @@ static int mailbox_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
resource_size_t size;
struct resource res;
ret = mailbox_chan_validate(cdev);
if (ret)
return ret;
smbox = devm_kzalloc(dev, sizeof(*smbox), GFP_KERNEL);
if (!smbox)
return -ENOMEM;

2
drivers/firmware/qcom_scm.c
View File

@ -1479,7 +1479,7 @@ static int qcom_scm_probe(struct platform_device *pdev)
init_completion(&__scm->waitq_comp);
irq = platform_get_irq(pdev, 0);
irq = platform_get_irq_optional(pdev, 0);
if (irq < 0) {
if (irq != -ENXIO)
return irq;

6
drivers/soc/qcom/llcc-qcom.c
View File

@ -191,9 +191,9 @@ static const struct llcc_slice_config sc8280xp_data[] = {
{ LLCC_CVP, 28, 512, 3, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
{ LLCC_APTCM, 30, 1024, 3, 1, 0x0, 0x1, 1, 0, 0, 1, 0, 0 },
{ LLCC_WRCACHE, 31, 1024, 1, 1, 0xfff, 0x0, 0, 0, 0, 0, 1, 0 },
{ LLCC_CVPFW, 32, 512, 1, 0, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
{ LLCC_CPUSS1, 33, 2048, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
{ LLCC_CPUHWT, 36, 512, 1, 1, 0xfff, 0x0, 0, 0, 0, 0, 1, 0 },
{ LLCC_CVPFW, 17, 512, 1, 0, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
{ LLCC_CPUSS1, 3, 2048, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
{ LLCC_CPUHWT, 5, 512, 1, 1, 0xfff, 0x0, 0, 0, 0, 0, 1, 0 },
};
static const struct llcc_slice_config sdm845_data[] = {

10
drivers/soc/qcom/rmtfs_mem.c
View File

@ -176,7 +176,8 @@ static int qcom_rmtfs_mem_probe(struct platform_device *pdev)
struct reserved_mem *rmem;
struct qcom_rmtfs_mem *rmtfs_mem;
u32 client_id;
u32 num_vmids, vmid[NUM_MAX_VMIDS];
u32 vmid[NUM_MAX_VMIDS];
int num_vmids;
int ret, i;
rmem = of_reserved_mem_lookup(node);
@ -228,8 +229,11 @@ static int qcom_rmtfs_mem_probe(struct platform_device *pdev)
}
num_vmids = of_property_count_u32_elems(node, "qcom,vmid");
if (num_vmids < 0) {
dev_err(&pdev->dev, "failed to count qcom,vmid elements: %d\n", ret);
if (num_vmids == -EINVAL) {
/* qcom,vmid is optional */
num_vmids = 0;
} else if (num_vmids < 0) {
dev_err(&pdev->dev, "failed to count qcom,vmid elements: %d\n", num_vmids);
goto remove_cdev;
} else if (num_vmids > NUM_MAX_VMIDS) {
dev_warn(&pdev->dev,

29
drivers/tee/amdtee/core.c
View File

@ -267,35 +267,34 @@ int amdtee_open_session(struct tee_context *ctx,
goto out;
}
/* Open session with loaded TA */
handle_open_session(arg, &session_info, param);
if (arg->ret != TEEC_SUCCESS) {
pr_err("open_session failed %d\n", arg->ret);
handle_unload_ta(ta_handle);
kref_put(&sess->refcount, destroy_session);
goto out;
}
/* Find an empty session index for the given TA */
spin_lock(&sess->lock);
i = find_first_zero_bit(sess->sess_mask, TEE_NUM_SESSIONS);
if (i < TEE_NUM_SESSIONS)
if (i < TEE_NUM_SESSIONS) {
sess->session_info[i] = session_info;
set_session_id(ta_handle, i, &arg->session);
set_bit(i, sess->sess_mask);
}
spin_unlock(&sess->lock);
if (i >= TEE_NUM_SESSIONS) {
pr_err("reached maximum session count %d\n", TEE_NUM_SESSIONS);
handle_close_session(ta_handle, session_info);
handle_unload_ta(ta_handle);
kref_put(&sess->refcount, destroy_session);
rc = -ENOMEM;
goto out;
}
/* Open session with loaded TA */
handle_open_session(arg, &session_info, param);
if (arg->ret != TEEC_SUCCESS) {
pr_err("open_session failed %d\n", arg->ret);
spin_lock(&sess->lock);
clear_bit(i, sess->sess_mask);
spin_unlock(&sess->lock);
handle_unload_ta(ta_handle);
kref_put(&sess->refcount, destroy_session);
goto out;
}
sess->session_info[i] = session_info;
set_session_id(ta_handle, i, &arg->session);
out:
free_pages((u64)ta, get_order(ta_size));
return rc;