i2c: axxia: enable clock before calling clk_get_rate()

axxia_i2c_init() uses clk_get_rate() for idev->i2c_clk. clk_get_rate()
should only be called if the clock is enabled, so ensure that by moving
the clk_prepare_enable() call before the call to axxia_i2c_init().

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 08678b850c ("i2c: axxia: Add I2C driver for AXM55xx")
Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This commit is contained in:
Tobias Jordan 2018-04-30 16:49:29 +02:00 committed by Wolfram Sang
parent b1437dcb97
commit e6faa71034

View File

@ -532,23 +532,23 @@ static int axxia_i2c_probe(struct platform_device *pdev)
if (idev->bus_clk_rate == 0)
idev->bus_clk_rate = 100000; /* default clock rate */
ret = clk_prepare_enable(idev->i2c_clk);
if (ret) {
dev_err(&pdev->dev, "failed to enable clock\n");
return ret;
}
ret = axxia_i2c_init(idev);
if (ret) {
dev_err(&pdev->dev, "failed to initialize\n");
return ret;
goto error_disable_clk;
}
ret = devm_request_irq(&pdev->dev, irq, axxia_i2c_isr, 0,
pdev->name, idev);
if (ret) {
dev_err(&pdev->dev, "failed to claim IRQ%d\n", irq);
return ret;
}
ret = clk_prepare_enable(idev->i2c_clk);
if (ret) {
dev_err(&pdev->dev, "failed to enable clock\n");
return ret;
goto error_disable_clk;
}
i2c_set_adapdata(&idev->adapter, idev);
@ -563,12 +563,14 @@ static int axxia_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, idev);
ret = i2c_add_adapter(&idev->adapter);
if (ret) {
clk_disable_unprepare(idev->i2c_clk);
return ret;
}
if (ret)
goto error_disable_clk;
return 0;
error_disable_clk:
clk_disable_unprepare(idev->i2c_clk);
return ret;
}
static int axxia_i2c_remove(struct platform_device *pdev)