diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 90c8c42e7e8b..4d16d8917074 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -135,12 +135,6 @@ config SH_HP6XX More information (hardware only) at . -config SH_EC3104 - bool "EC3104" - help - Select EC3104 if configuring for a system with an Eclipse - International EC3104 chip, e.g. the Harris AD2000. - config SH_SATURN bool "Saturn" select CPU_SUBTYPE_SH7604 @@ -156,9 +150,6 @@ config SH_DREAMCAST . There is a Dreamcast project is at . -config SH_BIGSUR - bool "BigSur" - config SH_MPC1211 bool "Interface MPC1211" help @@ -511,7 +502,7 @@ source "arch/sh/cchips/Kconfig" config HEARTBEAT bool "Heartbeat LED" depends on SH_MPC1211 || SH_SH03 || \ - SH_BIGSUR || SOLUTION_ENGINE || \ + SOLUTION_ENGINE || \ SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK || \ SH_R7780RP help diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 4903c7c665a9..bd9b1729f8b8 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -94,10 +94,8 @@ machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) := se/7300 machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) := se/7343 machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) := se/73180 machdir-$(CONFIG_SH_HP6XX) := hp6xx -machdir-$(CONFIG_SH_EC3104) := ec3104 machdir-$(CONFIG_SH_SATURN) := saturn machdir-$(CONFIG_SH_DREAMCAST) := dreamcast -machdir-$(CONFIG_SH_BIGSUR) := bigsur machdir-$(CONFIG_SH_MPC1211) := mpc1211 machdir-$(CONFIG_SH_SH03) := sh03 machdir-$(CONFIG_SH_SECUREEDGE5410) := snapgear diff --git a/arch/sh/boards/bigsur/Makefile b/arch/sh/boards/bigsur/Makefile deleted file mode 100644 index 0ff9497ac58e..000000000000 --- a/arch/sh/boards/bigsur/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the BigSur specific parts of the kernel -# - -obj-y := setup.o io.o irq.o led.o - diff --git a/arch/sh/boards/bigsur/io.c b/arch/sh/boards/bigsur/io.c deleted file mode 100644 index 23071f97eec3..000000000000 --- a/arch/sh/boards/bigsur/io.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * arch/sh/boards/bigsur/io.c - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * Derived from io_hd64465.h, which bore the message: - * By Greg Banks - * (c) 2000 PocketPenguins Inc. - * and from io_hd64461.h, which bore the message: - * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IO functions for a Hitachi Big Sur Evaluation Board. - */ - -#include -#include -#include -#include -#include - -/* Low iomap maps port 0-1K to addresses in 8byte chunks */ -#define BIGSUR_IOMAP_LO_THRESH 0x400 -#define BIGSUR_IOMAP_LO_SHIFT 3 -#define BIGSUR_IOMAP_LO_MASK ((1<>BIGSUR_IOMAP_LO_SHIFT) -static u32 bigsur_iomap_lo[BIGSUR_IOMAP_LO_NMAP]; -static u8 bigsur_iomap_lo_shift[BIGSUR_IOMAP_LO_NMAP]; - -/* High iomap maps port 1K-64K to addresses in 1K chunks */ -#define BIGSUR_IOMAP_HI_THRESH 0x10000 -#define BIGSUR_IOMAP_HI_SHIFT 10 -#define BIGSUR_IOMAP_HI_MASK ((1<>BIGSUR_IOMAP_HI_SHIFT) -static u32 bigsur_iomap_hi[BIGSUR_IOMAP_HI_NMAP]; -static u8 bigsur_iomap_hi_shift[BIGSUR_IOMAP_HI_NMAP]; - -void bigsur_port_map(u32 baseport, u32 nports, u32 addr, u8 shift) -{ - u32 port, endport = baseport + nports; - - pr_debug("bigsur_port_map(base=0x%0x, n=0x%0x, addr=0x%08x)\n", - baseport, nports, addr); - - for (port = baseport ; - port < endport && port < BIGSUR_IOMAP_LO_THRESH ; - port += (1<>BIGSUR_IOMAP_LO_SHIFT] = addr; - bigsur_iomap_lo_shift[port>>BIGSUR_IOMAP_LO_SHIFT] = shift; - addr += (1<<(BIGSUR_IOMAP_LO_SHIFT)); - } - - for (port = max_t(u32, baseport, BIGSUR_IOMAP_LO_THRESH); - port < endport && port < BIGSUR_IOMAP_HI_THRESH ; - port += (1<>BIGSUR_IOMAP_HI_SHIFT] = addr; - bigsur_iomap_hi_shift[port>>BIGSUR_IOMAP_HI_SHIFT] = shift; - addr += (1<<(BIGSUR_IOMAP_HI_SHIFT)); - } -} -EXPORT_SYMBOL(bigsur_port_map); - -void bigsur_port_unmap(u32 baseport, u32 nports) -{ - u32 port, endport = baseport + nports; - - pr_debug("bigsur_port_unmap(base=0x%0x, n=0x%0x)\n", baseport, nports); - - for (port = baseport ; - port < endport && port < BIGSUR_IOMAP_LO_THRESH ; - port += (1<>BIGSUR_IOMAP_LO_SHIFT] = 0; - } - - for (port = max_t(u32, baseport, BIGSUR_IOMAP_LO_THRESH); - port < endport && port < BIGSUR_IOMAP_HI_THRESH ; - port += (1<>BIGSUR_IOMAP_HI_SHIFT] = 0; - } -} -EXPORT_SYMBOL(bigsur_port_unmap); - -unsigned long bigsur_isa_port2addr(unsigned long port) -{ - unsigned long addr = 0; - unsigned char shift; - - /* Physical address not in P0, do nothing */ - if (PXSEG(port)) { - addr = port; - /* physical address in P0, map to P2 */ - } else if (port >= 0x30000) { - addr = P2SEGADDR(port); - /* Big Sur I/O + HD64465 registers 0x10000-0x30000 */ - } else if (port >= BIGSUR_IOMAP_HI_THRESH) { - addr = BIGSUR_INTERNAL_BASE + (port - BIGSUR_IOMAP_HI_THRESH); - /* Handle remapping of high IO/PCI IO ports */ - } else if (port >= BIGSUR_IOMAP_LO_THRESH) { - addr = bigsur_iomap_hi[port >> BIGSUR_IOMAP_HI_SHIFT]; - shift = bigsur_iomap_hi_shift[port >> BIGSUR_IOMAP_HI_SHIFT]; - - if (addr != 0) - addr += (port & BIGSUR_IOMAP_HI_MASK) << shift; - } else { - /* Handle remapping of low IO ports */ - addr = bigsur_iomap_lo[port >> BIGSUR_IOMAP_LO_SHIFT]; - shift = bigsur_iomap_lo_shift[port >> BIGSUR_IOMAP_LO_SHIFT]; - - if (addr != 0) - addr += (port & BIGSUR_IOMAP_LO_MASK) << shift; - } - - pr_debug("%s(0x%08lx) = 0x%08lx\n", __FUNCTION__, port, addr); - - return addr; -} - diff --git a/arch/sh/boards/bigsur/irq.c b/arch/sh/boards/bigsur/irq.c deleted file mode 100644 index 1ab04da36382..000000000000 --- a/arch/sh/boards/bigsur/irq.c +++ /dev/null @@ -1,334 +0,0 @@ -/* - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * - * Setup and IRQ handling code for the HD64465 companion chip. - * by Greg Banks - * Copyright (c) 2000 PocketPenguins Inc - * - * Derived from setup_hd64465.c which bore the message: - * Greg Banks - * Copyright (c) 2000 PocketPenguins Inc and - * Copyright (C) 2000 YAEGASHI Takeshi - * and setup_cqreek.c which bore message: - * Copyright (C) 2000 Niibe Yutaka - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IRQ functions for a Hitachi Big Sur Evaluation Board. - * - */ -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -//#define BIGSUR_DEBUG 3 -#undef BIGSUR_DEBUG - -#ifdef BIGSUR_DEBUG -#define DIPRINTK(n, args...) if (BIGSUR_DEBUG>(n)) printk(args) -#else -#define DIPRINTK(n, args...) -#endif /* BIGSUR_DEBUG */ - -#ifdef CONFIG_HD64465 -extern int hd64465_irq_demux(int irq); -#endif /* CONFIG_HD64465 */ - - -/*===========================================================*/ -// Big Sur CPLD IRQ Routines -/*===========================================================*/ - -/* Level 1 IRQ routines */ -static void disable_bigsur_l1irq(unsigned int irq) -{ - unsigned char mask; - unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0; - unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) ); - - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - pr_debug("Disable L1 IRQ %d\n", irq); - DIPRINTK(2,"disable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - - /* Disable IRQ - set mask bit */ - mask = inb(mask_port) | bit; - outb(mask, mask_port); - return; - } - pr_debug("disable_bigsur_l1irq: Invalid IRQ %d\n", irq); -} - -static void enable_bigsur_l1irq(unsigned int irq) -{ - unsigned char mask; - unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0; - unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) ); - - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - pr_debug("Enable L1 IRQ %d\n", irq); - DIPRINTK(2,"enable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - /* Enable L1 IRQ - clear mask bit */ - mask = inb(mask_port) & ~bit; - outb(mask, mask_port); - return; - } - pr_debug("enable_bigsur_l1irq: Invalid IRQ %d\n", irq); -} - - -/* Level 2 irq masks and registers for L2 decoding */ -/* Level2 bitmasks for each level 1 IRQ */ -const u32 bigsur_l2irq_mask[] = - {0x40,0x80,0x08,0x01,0x01,0x3C,0x3E,0xFF,0x40,0x80,0x06,0x03}; -/* Level2 to ISR[n] map for each level 1 IRQ */ -const u32 bigsur_l2irq_reg[] = - { 2, 2, 3, 3, 1, 2, 1, 0, 1, 1, 3, 2}; -/* Level2 to Level 1 IRQ map */ -const u32 bigsur_l2_l1_map[] = - {7,7,7,7,7,7,7,7, 4,6,6,6,6,6,8,9, 11,11,5,5,5,5,0,1, 3,10,10,2,-1,-1,-1,-1}; -/* IRQ inactive level (high or low) */ -const u32 bigsur_l2_inactv_state[] = {0x00, 0xBE, 0xFC, 0xF7}; - -/* CPLD external status and mask registers base and offsets */ -static const u32 isr_base = BIGSUR_IRQ0; -static const u32 isr_offset = BIGSUR_IRQ0 - BIGSUR_IRQ1; -static const u32 imr_base = BIGSUR_IMR0; -static const u32 imr_offset = BIGSUR_IMR0 - BIGSUR_IMR1; - -#define REG_NUM(irq) ((irq-BIGSUR_2NDLVL_IRQ_LOW)/8 ) - -/* Level 2 IRQ routines */ -static void disable_bigsur_l2irq(unsigned int irq) -{ - unsigned char mask; - unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8); - unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset; - - if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { - pr_debug("Disable L2 IRQ %d\n", irq); - DIPRINTK(2,"disable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - - /* Disable L2 IRQ - set mask bit */ - mask = inb(mask_port) | bit; - outb(mask, mask_port); - return; - } - pr_debug("disable_bigsur_l2irq: Invalid IRQ %d\n", irq); -} - -static void enable_bigsur_l2irq(unsigned int irq) -{ - unsigned char mask; - unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8); - unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset; - - if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { - pr_debug("Enable L2 IRQ %d\n", irq); - DIPRINTK(2,"enable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - - /* Enable L2 IRQ - clear mask bit */ - mask = inb(mask_port) & ~bit; - outb(mask, mask_port); - return; - } - pr_debug("enable_bigsur_l2irq: Invalid IRQ %d\n", irq); -} - -static void mask_and_ack_bigsur(unsigned int irq) -{ - pr_debug("mask_and_ack_bigsur IRQ %d\n", irq); - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) - disable_bigsur_l1irq(irq); - else - disable_bigsur_l2irq(irq); -} - -static void end_bigsur_irq(unsigned int irq) -{ - pr_debug("end_bigsur_irq IRQ %d\n", irq); - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) { - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) - enable_bigsur_l1irq(irq); - else - enable_bigsur_l2irq(irq); - } -} - -static unsigned int startup_bigsur_irq(unsigned int irq) -{ - u8 mask; - u32 reg; - - pr_debug("startup_bigsur_irq IRQ %d\n", irq); - - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - /* Enable the L1 IRQ */ - enable_bigsur_l1irq(irq); - /* Enable all L2 IRQs in this L1 IRQ */ - mask = ~(bigsur_l2irq_mask[irq-BIGSUR_IRQ_LOW]); - reg = imr_base - bigsur_l2irq_reg[irq-BIGSUR_IRQ_LOW] * imr_offset; - mask &= inb(reg); - outb(mask,reg); - DIPRINTK(2,"startup_bigsur_irq: IMR=0x%08x mask=0x%x\n",reg,inb(reg)); - } - else { - /* Enable the L2 IRQ - clear mask bit */ - enable_bigsur_l2irq(irq); - /* Enable the L1 bit masking this L2 IRQ */ - enable_bigsur_l1irq(bigsur_l2_l1_map[irq-BIGSUR_2NDLVL_IRQ_LOW]); - DIPRINTK(2,"startup_bigsur_irq: L1=%d L2=%d\n", - bigsur_l2_l1_map[irq-BIGSUR_2NDLVL_IRQ_LOW],irq); - } - return 0; -} - -static void shutdown_bigsur_irq(unsigned int irq) -{ - pr_debug("shutdown_bigsur_irq IRQ %d\n", irq); - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) - disable_bigsur_l1irq(irq); - else - disable_bigsur_l2irq(irq); -} - -/* Define the IRQ structures for the L1 and L2 IRQ types */ -static struct hw_interrupt_type bigsur_l1irq_type = { - .typename = "BigSur-CPLD-Level1-IRQ", - .startup = startup_bigsur_irq, - .shutdown = shutdown_bigsur_irq, - .enable = enable_bigsur_l1irq, - .disable = disable_bigsur_l1irq, - .ack = mask_and_ack_bigsur, - .end = end_bigsur_irq -}; - -static struct hw_interrupt_type bigsur_l2irq_type = { - .typename = "BigSur-CPLD-Level2-IRQ", - .startup = startup_bigsur_irq, - .shutdown =shutdown_bigsur_irq, - .enable = enable_bigsur_l2irq, - .disable = disable_bigsur_l2irq, - .ack = mask_and_ack_bigsur, - .end = end_bigsur_irq -}; - - -static void make_bigsur_l1isr(unsigned int irq) { - - /* sanity check first */ - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - /* save the handler in the main description table */ - irq_desc[irq].chip = &bigsur_l1irq_type; - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = 0; - irq_desc[irq].depth = 1; - - disable_bigsur_l1irq(irq); - return; - } - pr_debug("make_bigsur_l1isr: bad irq, %d\n", irq); - return; -} - -static void make_bigsur_l2isr(unsigned int irq) { - - /* sanity check first */ - if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { - /* save the handler in the main description table */ - irq_desc[irq].chip = &bigsur_l2irq_type; - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = 0; - irq_desc[irq].depth = 1; - - disable_bigsur_l2irq(irq); - return; - } - pr_debug("make_bigsur_l2isr: bad irq, %d\n", irq); - return; -} - -/* The IRQ's will be decoded as follows: - * If a level 2 handler exists and there is an unmasked active - * IRQ, the 2nd level handler will be called. - * If a level 2 handler does not exist for the active IRQ - * the 1st level handler will be called. - */ - -int bigsur_irq_demux(int irq) -{ - int dmux_irq = irq; - u8 mask, actv_irqs; - u32 reg_num; - - DIPRINTK(3,"bigsur_irq_demux, irq=%d\n", irq); - /* decode the 1st level IRQ */ - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - /* Get corresponding L2 ISR bitmask and ISR number */ - mask = bigsur_l2irq_mask[irq-BIGSUR_IRQ_LOW]; - reg_num = bigsur_l2irq_reg[irq-BIGSUR_IRQ_LOW]; - /* find the active IRQ's (XOR with inactive level)*/ - actv_irqs = inb(isr_base-reg_num*isr_offset) ^ - bigsur_l2_inactv_state[reg_num]; - /* decode active IRQ's */ - actv_irqs = actv_irqs & mask & ~(inb(imr_base-reg_num*imr_offset)); - /* if NEZ then we have an active L2 IRQ */ - if(actv_irqs) dmux_irq = ffz(~actv_irqs) + reg_num*8+BIGSUR_2NDLVL_IRQ_LOW; - /* if no 2nd level IRQ action, but has 1st level, use 1st level handler */ - if(!irq_desc[dmux_irq].action && irq_desc[irq].action) - dmux_irq = irq; - DIPRINTK(1,"bigsur_irq_demux: irq=%d dmux_irq=%d mask=0x%04x reg=%d\n", - irq, dmux_irq, mask, reg_num); - } -#ifdef CONFIG_HD64465 - dmux_irq = hd64465_irq_demux(dmux_irq); -#endif /* CONFIG_HD64465 */ - DIPRINTK(3,"bigsur_irq_demux, demux_irq=%d\n", dmux_irq); - - return dmux_irq; -} - -/*===========================================================*/ -// Big Sur Init Routines -/*===========================================================*/ -void __init init_bigsur_IRQ(void) -{ - int i; - - if (!MACH_BIGSUR) return; - - /* Create ISR's for Big Sur CPLD IRQ's */ - /*==============================================================*/ - for(i=BIGSUR_IRQ_LOW;i - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Big Sur specific LED code. - */ - -#include -#include - -static void mach_led(int position, int value) -{ - int word; - - word = bigsur_inl(BIGSUR_CSLR); - if (value) { - bigsur_outl(word & ~BIGSUR_LED, BIGSUR_CSLR); - } else { - bigsur_outl(word | BIGSUR_LED, BIGSUR_CSLR); - } -} - -#ifdef CONFIG_HEARTBEAT - -#include - -/* Cycle the LED on/off */ -void heartbeat_bigsur(void) -{ - static unsigned cnt = 0, period = 0, dist = 0; - - if (cnt == 0 || cnt == dist) - mach_led( -1, 1); - else if (cnt == 7 || cnt == dist+7) - mach_led( -1, 0); - - if (++cnt > period) { - cnt = 0; - /* The hyperbolic function below modifies the heartbeat period - * length in dependency of the current (5min) load. It goes - * through the points f(0)=126, f(1)=86, f(5)=51, - * f(inf)->30. */ - period = ((672< - * Copyright (c) 2000 PocketPenguins Inc - * - * Derived from setup_hd64465.c which bore the message: - * Greg Banks - * Copyright (c) 2000 PocketPenguins Inc and - * Copyright (C) 2000 YAEGASHI Takeshi - * and setup_cqreek.c which bore message: - * Copyright (C) 2000 Niibe Yutaka - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Setup functions for a Hitachi Big Sur Evaluation Board. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -/*===========================================================*/ -// Big Sur Init Routines -/*===========================================================*/ - -static void __init bigsur_setup(char **cmdline_p) -{ - /* Mask all 2nd level IRQ's */ - outb(-1,BIGSUR_IMR0); - outb(-1,BIGSUR_IMR1); - outb(-1,BIGSUR_IMR2); - outb(-1,BIGSUR_IMR3); - - /* Mask 1st level interrupts */ - outb(-1,BIGSUR_IRLMR0); - outb(-1,BIGSUR_IRLMR1); - -#if defined (CONFIG_HD64465) && defined (CONFIG_SERIAL) - /* remap IO ports for first ISA serial port to HD64465 UART */ - bigsur_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1); -#endif /* CONFIG_HD64465 && CONFIG_SERIAL */ - /* TODO: setup IDE registers */ - bigsur_port_map(BIGSUR_IDECTL_IOPORT, 2, BIGSUR_ICTL, 8); - /* Setup the Ethernet port to BIGSUR_ETHER_IOPORT */ - bigsur_port_map(BIGSUR_ETHER_IOPORT, 16, BIGSUR_ETHR+BIGSUR_ETHER_IOPORT, 0); - /* set page to 1 */ - outw(1, BIGSUR_ETHR+0xe); - /* set the IO port to BIGSUR_ETHER_IOPORT */ - outw(BIGSUR_ETHER_IOPORT<<3, BIGSUR_ETHR+0x2); -} - -/* - * The Machine Vector - */ -extern void heartbeat_bigsur(void); -extern void init_bigsur_IRQ(void); - -struct sh_machine_vector mv_bigsur __initmv = { - .mv_name = "Big Sur", - .mv_setup = bigsur_setup, - - .mv_isa_port2addr = bigsur_isa_port2addr, - .mv_irq_demux = bigsur_irq_demux, - - .mv_init_irq = init_bigsur_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_bigsur, -#endif -}; -ALIAS_MV(bigsur) diff --git a/arch/sh/boards/ec3104/Makefile b/arch/sh/boards/ec3104/Makefile deleted file mode 100644 index 178891534b67..000000000000 --- a/arch/sh/boards/ec3104/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the EC3104 specific parts of the kernel -# - -obj-y := setup.o io.o irq.o - diff --git a/arch/sh/boards/ec3104/io.c b/arch/sh/boards/ec3104/io.c deleted file mode 100644 index 2f86394b280b..000000000000 --- a/arch/sh/boards/ec3104/io.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * linux/arch/sh/boards/ec3104/io.c - * EC3104 companion chip support - * - * Copyright (C) 2000 Philipp Rumpf - * - */ -/* EC3104 note: - * This code was written without any documentation about the EC3104 chip. While - * I hope I got most of the basic functionality right, the register names I use - * are most likely completely different from those in the chip documentation. - * - * If you have any further information about the EC3104, please tell me - * (prumpf@tux.org). - */ - -#include -#include -#include -#include -#include - -/* - * EC3104 has a real ISA bus which we redirect low port accesses to (the - * actual device on mine is a ESS 1868, and I don't want to hack the driver - * more than strictly necessary). I am not going to duplicate the - * hard coding of PC addresses (for the 16550s aso) here though; it's just - * too ugly. - */ - -#define low_port(port) ((port) < 0x10000) - -static inline unsigned long port2addr(unsigned long port) -{ - switch(port >> 16) { - case 0: - return EC3104_ISA_BASE + port * 2; - - /* XXX hack. it's unclear what to do about the serial ports */ - case 1: - return EC3104_BASE + (port&0xffff) * 4; - - default: - /* XXX PCMCIA */ - return 0; - } -} - -unsigned char ec3104_inb(unsigned long port) -{ - u8 ret; - - ret = *(volatile u8 *)port2addr(port); - - return ret; -} - -unsigned short ec3104_inw(unsigned long port) -{ - BUG(); -} - -unsigned long ec3104_inl(unsigned long port) -{ - BUG(); -} - -void ec3104_outb(unsigned char data, unsigned long port) -{ - *(volatile u8 *)port2addr(port) = data; -} - -void ec3104_outw(unsigned short data, unsigned long port) -{ - BUG(); -} - -void ec3104_outl(unsigned long data, unsigned long port) -{ - BUG(); -} diff --git a/arch/sh/boards/ec3104/irq.c b/arch/sh/boards/ec3104/irq.c deleted file mode 100644 index ffa4ff1f090f..000000000000 --- a/arch/sh/boards/ec3104/irq.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * linux/arch/sh/boards/ec3104/irq.c - * EC3104 companion chip support - * - * Copyright (C) 2000 Philipp Rumpf - * - */ - -#include -#include -#include - -/* This is for debugging mostly; here's the table that I intend to keep - * in here: - * - * index function base addr power interrupt bit - * 0 power b0ec0000 --- 00000001 (unused) - * 1 irqs b0ec1000 --- 00000002 (unused) - * 2 ?? b0ec2000 b0ec0008 00000004 - * 3 PS2 (1) b0ec3000 b0ec000c 00000008 - * 4 PS2 (2) b0ec4000 b0ec0010 00000010 - * 5 ?? b0ec5000 b0ec0014 00000020 - * 6 I2C b0ec6000 b0ec0018 00000040 - * 7 serial (1) b0ec7000 b0ec001c 00000080 - * 8 serial (2) b0ec8000 b0ec0020 00000100 - * 9 serial (3) b0ec9000 b0ec0024 00000200 - * 10 serial (4) b0eca000 b0ec0028 00000400 - * 12 GPIO (1) b0ecc000 b0ec0030 - * 13 GPIO (2) b0ecc000 b0ec0030 - * 16 pcmcia (1) b0ed0000 b0ec0040 00010000 - * 17 pcmcia (2) b0ed1000 b0ec0044 00020000 - */ - -/* I used the register names from another interrupt controller I worked with, - * since it seems to be identical to the ec3104 except that all bits are - * inverted: - * - * IRR: Interrupt Request Register (pending and enabled interrupts) - * IMR: Interrupt Mask Register (which interrupts are enabled) - * IPR: Interrupt Pending Register (pending interrupts, even disabled ones) - * - * 0 bits mean pending or enabled, 1 bits mean not pending or disabled. all - * IRQs seem to be level-triggered. - */ - -#define EC3104_IRR (EC3104_BASE + 0x1000) -#define EC3104_IMR (EC3104_BASE + 0x1004) -#define EC3104_IPR (EC3104_BASE + 0x1008) - -#define ctrl_readl(addr) (*(volatile u32 *)(addr)) -#define ctrl_writel(data,addr) (*(volatile u32 *)(addr) = (data)) -#define ctrl_readb(addr) (*(volatile u8 *)(addr)) - -static char *ec3104_name(unsigned index) -{ - switch(index) { - case 0: - return "power management"; - case 1: - return "interrupts"; - case 3: - return "PS2 (1)"; - case 4: - return "PS2 (2)"; - case 5: - return "I2C (1)"; - case 6: - return "I2C (2)"; - case 7: - return "serial (1)"; - case 8: - return "serial (2)"; - case 9: - return "serial (3)"; - case 10: - return "serial (4)"; - case 16: - return "pcmcia (1)"; - case 17: - return "pcmcia (2)"; - default: { - static char buf[32]; - - sprintf(buf, "unknown (%d)", index); - - return buf; - } - } -} - -int get_pending_interrupts(char *buf) -{ - u32 ipr; - u32 bit; - char *p = buf; - - p += sprintf(p, "pending: ("); - - ipr = ctrl_inl(EC3104_IPR); - - for (bit = 1; bit < 32; bit++) - if (!(ipr & (1< - * - */ -/* EC3104 note: - * This code was written without any documentation about the EC3104 chip. While - * I hope I got most of the basic functionality right, the register names I use - * are most likely completely different from those in the chip documentation. - * - * If you have any further information about the EC3104, please tell me - * (prumpf@tux.org). - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static void __init ec3104_setup(char **cmdline_p) -{ - char str[8]; - int i; - - for (i=0; i<8; i++) - str[i] = ctrl_readb(EC3104_BASE + i); - - for (i = EC3104_IRQBASE; i < EC3104_IRQBASE + 32; i++) - irq_desc[i].handler = &ec3104_int; - - printk("initializing EC3104 \"%.8s\" at %08x, IRQ %d, IRQ base %d\n", - str, EC3104_BASE, EC3104_IRQ, EC3104_IRQBASE); - - /* mask all interrupts. this should have been done by the boot - * loader for us but we want to be sure ... */ - ctrl_writel(0xffffffff, EC3104_IMR); -} - -/* - * The Machine Vector - */ -struct sh_machine_vector mv_ec3104 __initmv = { - .mv_name = "EC3104", - .mv_setup = ec3104_setup, - .mv_nr_irqs = 96, - - .mv_inb = ec3104_inb, - .mv_inw = ec3104_inw, - .mv_inl = ec3104_inl, - .mv_outb = ec3104_outb, - .mv_outw = ec3104_outw, - .mv_outl = ec3104_outl, - - .mv_irq_demux = ec3104_irq_demux, -}; -ALIAS_MV(ec3104) diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 9e00cb8a39e9..cc8d0d0b1427 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ dma-dreamcast.o obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o -obj-$(CONFIG_SH_BIGSUR) += ops-bigsur.o obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o obj-$(CONFIG_SH_R7780RP) += ops-r7780rp.o fixups-r7780rp.o diff --git a/arch/sh/drivers/pci/ops-bigsur.c b/arch/sh/drivers/pci/ops-bigsur.c deleted file mode 100644 index eb31be751524..000000000000 --- a/arch/sh/drivers/pci/ops-bigsur.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * linux/arch/sh/drivers/pci/ops-bigsur.c - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * - * Ported to new API by Paul Mundt . - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * PCI initialization for the Hitachi Big Sur Evaluation Board - */ -#include -#include -#include -#include -#include -#include "pci-sh4.h" -#include - -#define BIGSUR_PCI_IO 0x4000 -#define BIGSUR_PCI_MEM 0xfd000000 - -static struct resource sh7751_io_resource = { - .name = "SH7751 IO", - .start = BIGSUR_PCI_IO, - .end = BIGSUR_PCI_IO + (64*1024) - 1, - .flags = IORESOURCE_IO, -}; - -static struct resource sh7751_mem_resource = { - .name = "SH7751 mem", - .start = BIGSUR_PCI_MEM, - .end = BIGSUR_PCI_MEM + (64*1024*1024) - 1, - .flags = IORESOURCE_MEM, -}; - -extern struct pci_ops sh7751_pci_ops; - -struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, - { 0, } -}; - -static struct sh4_pci_address_map sh7751_pci_map = { - .window0 = { - .base = SH7751_CS3_BASE_ADDR, - .size = BIGSUR_LSR0_SIZE, - }, - - .window1 = { - .base = SH7751_CS3_BASE_ADDR, - .size = BIGSUR_LSR1_SIZE, - }, -}; - -/* - * Initialize the Big Sur PCI interface - * Setup hardware to be Central Funtion - * Copy the BSR regs to the PCI interface - * Setup PCI windows into local RAM - */ -int __init pcibios_init_platform(void) -{ - return sh7751_pcic_init(&sh7751_pci_map); -} - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - /* - * The Big Sur can be used in a CPCI chassis, but the SH7751 PCI - * interface is on the wrong end of the board so that it can also - * support a V320 CPI interface chip... Therefor the IRQ mapping is - * somewhat use dependent... I'l assume a linear map for now, i.e. - * INTA=slot0,pin0... INTD=slot3,pin0... - */ - int irq = (slot + pin-1) % 4 + BIGSUR_SH7751_PCI_IRQ_BASE; - - PCIDBG(2, "PCI: Mapping Big Sur IRQ for slot %d, pin %c to irq %d\n", - slot, pin-1+'A', irq); - - return irq; -} diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 85e1ee2e2e7b..9ddff760d3c6 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -157,15 +157,6 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) PCIBIOS_MIN_IO, (64 << 10), SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO); - /* - * XXX: For now, leave this board-specific. In the event we have other - * boards that need to do similar work, this can be wrapped. - */ -#ifdef CONFIG_SH_BIGSUR - bigsur_port_map(PCIBIOS_MIN_IO, (64 << 10), - SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO, 0); -#endif - /* Make sure the MSB's of IO window are set to access PCI space * correctly */ word = PCIBIOS_MIN_IO & SH4_PCIIOBR_MASK; diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 0571755e9a84..4fe0f94cbf42 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -16,7 +16,6 @@ HD64461 HD64461 HD64465 HD64465 SATURN SH_SATURN DREAMCAST SH_DREAMCAST -BIGSUR SH_BIGSUR MPC1211 SH_MPC1211 SNAPGEAR SH_SECUREEDGE5410 HS7751RVOIP SH_HS7751RVOIP diff --git a/include/asm-sh/bigsur/bigsur.h b/include/asm-sh/bigsur/bigsur.h deleted file mode 100644 index 427245f93589..000000000000 --- a/include/asm-sh/bigsur/bigsur.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * - * Hitachi Big Sur Eval Board support - * - * Dustin McIntire (dustin@sensoria.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Derived from Hitachi SH7751 reference manual - * - */ - -#ifndef _ASM_BIGSUR_H_ -#define _ASM_BIGSUR_H_ - -#include -#include - -/* 7751 Internal IRQ's used by external CPLD controller */ -#define BIGSUR_IRQ_LOW 0 -#define BIGSUR_IRQ_NUM 14 /* External CPLD level 1 IRQs */ -#define BIGSUR_IRQ_HIGH (BIGSUR_IRQ_LOW + BIGSUR_IRQ_NUM) -#define BIGSUR_2NDLVL_IRQ_LOW (HD64465_IRQ_BASE+HD64465_IRQ_NUM) -#define BIGSUR_2NDLVL_IRQ_NUM 32 /* Level 2 IRQs = 4 regs * 8 bits */ -#define BIGSUR_2NDLVL_IRQ_HIGH (BIGSUR_2NDLVL_IRQ_LOW + \ - BIGSUR_2NDLVL_IRQ_NUM) - -/* PCI interrupt base number (A_INTA-A_INTD) */ -#define BIGSUR_SH7751_PCI_IRQ_BASE (BIGSUR_2NDLVL_IRQ_LOW+10) - -/* CPLD registers and external chip addresses */ -#define BIGSUR_HD64464_ADDR 0xB2000000 -#define BIGSUR_DGDR 0xB1FFFE00 -#define BIGSUR_BIDR 0xB1FFFD00 -#define BIGSUR_CSLR 0xB1FFFC00 -#define BIGSUR_SW1R 0xB1FFFB00 -#define BIGSUR_DBGR 0xB1FFFA00 -#define BIGSUR_BDTR 0xB1FFF900 -#define BIGSUR_BDRR 0xB1FFF800 -#define BIGSUR_PPR1 0xB1FFF700 -#define BIGSUR_PPR2 0xB1FFF600 -#define BIGSUR_IDE2 0xB1FFF500 -#define BIGSUR_IDE3 0xB1FFF400 -#define BIGSUR_SPCR 0xB1FFF300 -#define BIGSUR_ETHR 0xB1FE0000 -#define BIGSUR_PPDR 0xB1FDFF00 -#define BIGSUR_ICTL 0xB1FDFE00 -#define BIGSUR_ICMD 0xB1FDFD00 -#define BIGSUR_DMA0 0xB1FDFC00 -#define BIGSUR_DMA1 0xB1FDFB00 -#define BIGSUR_IRQ0 0xB1FDFA00 -#define BIGSUR_IRQ1 0xB1FDF900 -#define BIGSUR_IRQ2 0xB1FDF800 -#define BIGSUR_IRQ3 0xB1FDF700 -#define BIGSUR_IMR0 0xB1FDF600 -#define BIGSUR_IMR1 0xB1FDF500 -#define BIGSUR_IMR2 0xB1FDF400 -#define BIGSUR_IMR3 0xB1FDF300 -#define BIGSUR_IRLMR0 0xB1FDF200 -#define BIGSUR_IRLMR1 0xB1FDF100 -#define BIGSUR_V320USC_ADDR 0xB1000000 -#define BIGSUR_HD64465_ADDR 0xB0000000 -#define BIGSUR_INTERNAL_BASE 0xB0000000 - -/* SMC ethernet card parameters */ -#define BIGSUR_ETHER_IOPORT 0x220 - -/* IDE register paramters */ -#define BIGSUR_IDECMD_IOPORT 0x1f0 -#define BIGSUR_IDECTL_IOPORT 0x1f8 - -/* LED bit position in BIGSUR_CSLR */ -#define BIGSUR_LED (1<<4) - -/* PCI: default LOCAL memory window sizes (seen from PCI bus) */ -#define BIGSUR_LSR0_SIZE (64*(1<<20)) //64MB -#define BIGSUR_LSR1_SIZE (64*(1<<20)) //64MB - -#endif /* _ASM_BIGSUR_H_ */ diff --git a/include/asm-sh/bigsur/io.h b/include/asm-sh/bigsur/io.h deleted file mode 100644 index 1470ac8d4a39..000000000000 --- a/include/asm-sh/bigsur/io.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * include/asm-sh/bigsur/io.h - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * Derived from io_hd64465.h, which bore the message: - * By Greg Banks - * (c) 2000 PocketPenguins Inc. - * and from io_hd64461.h, which bore the message: - * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IO functions for a Hitachi Big Sur Evaluation Board. - */ - -#ifndef _ASM_SH_IO_BIGSUR_H -#define _ASM_SH_IO_BIGSUR_H - -#include - -extern unsigned long bigsur_isa_port2addr(unsigned long offset); -extern int bigsur_irq_demux(int irq); -/* Provision for generic secondary demux step -- used by PCMCIA code */ -extern void bigsur_register_irq_demux(int irq, - int (*demux)(int irq, void *dev), void *dev); -extern void bigsur_unregister_irq_demux(int irq); -/* Set this variable to 1 to see port traffic */ -extern int bigsur_io_debug; -/* Map a range of ports to a range of kernel virtual memory. */ -extern void bigsur_port_map(u32 baseport, u32 nports, u32 addr, u8 shift); -extern void bigsur_port_unmap(u32 baseport, u32 nports); - -#endif /* _ASM_SH_IO_BIGSUR_H */ - diff --git a/include/asm-sh/bigsur/serial.h b/include/asm-sh/bigsur/serial.h deleted file mode 100644 index a08fa82fe45a..000000000000 --- a/include/asm-sh/bigsur/serial.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * include/asm-sh/bigsur/serial.h - * - * Configuration details for Big Sur 16550 based serial ports - * i.e. HD64465, PCMCIA, etc. - */ - -#ifndef _ASM_SERIAL_BIGSUR_H -#define _ASM_SERIAL_BIGSUR_H -#include - -#define BASE_BAUD (3379200 / 16) - -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) - - -#define SERIAL_PORT_DFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS } /* ttyS0 */ - -/* XXX: This should be moved ino irq.h */ -#define irq_cannonicalize(x) (x) - -#endif /* _ASM_SERIAL_BIGSUR_H */ diff --git a/include/asm-sh/ec3104/ec3104.h b/include/asm-sh/ec3104/ec3104.h deleted file mode 100644 index 639cfa489c8f..000000000000 --- a/include/asm-sh/ec3104/ec3104.h +++ /dev/null @@ -1,43 +0,0 @@ -#ifndef __ASM_EC3104_H -#define __ASM_EC3104_H - - -/* - * Most of the register set is at 0xb0ec0000 - 0xb0ecffff. - * - * as far as I've figured it out the register map is: - * 0xb0ec0000 - id string - * 0xb0ec0XXX - power management - * 0xb0ec1XXX - interrupt control - * 0xb0ec3XXX - ps2 port (touch pad on aero 8000) - * 0xb0ec6XXX - i2c - * 0xb0ec7000 - first serial port (proprietary connector on aero 8000) - * 0xb0ec8000 - second serial port - * 0xb0ec9000 - third serial port - * 0xb0eca000 - fourth serial port (keyboard controller on aero 8000) - * 0xb0eccXXX - GPIO - * 0xb0ecdXXX - GPIO - */ - -#define EC3104_BASE 0xb0ec0000 - -#define EC3104_SER4_DATA (EC3104_BASE+0xa000) -#define EC3104_SER4_IIR (EC3104_BASE+0xa008) -#define EC3104_SER4_MCR (EC3104_BASE+0xa010) -#define EC3104_SER4_LSR (EC3104_BASE+0xa014) -#define EC3104_SER4_MSR (EC3104_BASE+0xa018) - -/* - * our ISA bus. this seems to be real ISA. - */ -#define EC3104_ISA_BASE 0xa5000000 - -#define EC3104_IRQ 11 -#define EC3104_IRQBASE 64 - -#define EC3104_IRQ_SER1 EC3104_IRQBASE + 7 -#define EC3104_IRQ_SER2 EC3104_IRQBASE + 8 -#define EC3104_IRQ_SER3 EC3104_IRQBASE + 9 -#define EC3104_IRQ_SER4 EC3104_IRQBASE + 10 - -#endif /* __ASM_EC3104_H */ diff --git a/include/asm-sh/ec3104/io.h b/include/asm-sh/ec3104/io.h deleted file mode 100644 index ea5c8e65ac11..000000000000 --- a/include/asm-sh/ec3104/io.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _ASM_SH_IO_EC3104_H -#define _ASM_SH_IO_EC3104_H - -#include - -extern unsigned char ec3104_inb(unsigned long port); -extern unsigned short ec3104_inw(unsigned long port); -extern unsigned long ec3104_inl(unsigned long port); - -extern void ec3104_outb(unsigned char value, unsigned long port); -extern void ec3104_outw(unsigned short value, unsigned long port); -extern void ec3104_outl(unsigned long value, unsigned long port); - -extern int ec3104_irq_demux(int irq); - -#endif /* _ASM_SH_IO_EC3104_H */ diff --git a/include/asm-sh/ec3104/keyboard.h b/include/asm-sh/ec3104/keyboard.h deleted file mode 100644 index c1253a683197..000000000000 --- a/include/asm-sh/ec3104/keyboard.h +++ /dev/null @@ -1,15 +0,0 @@ -extern unsigned char ec3104_kbd_sysrq_xlate[]; -extern int ec3104_kbd_setkeycode(unsigned int scancode, unsigned int keycode); -extern int ec3104_kbd_getkeycode(unsigned int scancode); -extern int ec3104_kbd_translate(unsigned char, unsigned char *, char); -extern char ec3104_kbd_unexpected_up(unsigned char); -extern void ec3104_kbd_leds(unsigned char); -extern void ec3104_kbd_init_hw(void); - -#define kbd_sysrq_xlate ec3104_kbd_sysrq_xlate -#define kbd_setkeycode ec3104_kbd_setkeycode -#define kbd_getkeycode ec3104_kbd_getkeycode -#define kbd_translate ec3104_kbd_translate -#define kbd_unexpected_up ec3104_kbd_unexpected_up -#define kbd_leds ec3104_kbd_leds -#define kbd_init_hw ec3104_kbd_init_hw diff --git a/include/asm-sh/ec3104/serial.h b/include/asm-sh/ec3104/serial.h deleted file mode 100644 index cfe4d78ec1ee..000000000000 --- a/include/asm-sh/ec3104/serial.h +++ /dev/null @@ -1,20 +0,0 @@ -#include -/* Naturally we don't know the exact value but 115200 baud has a divisor - * of 9 and 19200 baud has a divisor of 52, so this seems like a good - * guess. */ -#define BASE_BAUD (16800000 / 16) - -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) - -/* there is a fourth serial port with the expected values as well, but - * it's got the keyboard controller behind it so we can't really use it - * (without moving the keyboard driver to userspace, which doesn't sound - * like a very good idea) */ -#define SERIAL_PORT_DFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, 0x11C00, EC3104_IRQBASE+7, STD_COM_FLAGS }, /* ttyS0 */ \ - { 0, BASE_BAUD, 0x12000, EC3104_IRQBASE+8, STD_COM_FLAGS }, /* ttyS1 */ \ - { 0, BASE_BAUD, 0x12400, EC3104_IRQBASE+9, STD_COM_FLAGS }, /* ttyS2 */ - -/* XXX: This should be moved ino irq.h */ -#define irq_cannonicalize(x) (x) diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h index bff965ef4b95..8ccf7ae593ef 100644 --- a/include/asm-sh/irq.h +++ b/include/asm-sh/irq.h @@ -66,12 +66,8 @@ /* 3. OFFCHIP_NR_IRQS */ #if defined(CONFIG_HD64461) # define OFFCHIP_NR_IRQS 18 -#elif defined (CONFIG_SH_BIGSUR) /* must be before CONFIG_HD64465 */ -# define OFFCHIP_NR_IRQS 48 #elif defined(CONFIG_HD64465) # define OFFCHIP_NR_IRQS 16 -#elif defined (CONFIG_SH_EC3104) -# define OFFCHIP_NR_IRQS 16 #elif defined (CONFIG_SH_DREAMCAST) # define OFFCHIP_NR_IRQS 96 #elif defined (CONFIG_SH_TITAN) diff --git a/include/asm-sh/serial.h b/include/asm-sh/serial.h index 8734590d27e8..4ac0e7810812 100644 --- a/include/asm-sh/serial.h +++ b/include/asm-sh/serial.h @@ -9,11 +9,6 @@ #include -#ifdef CONFIG_SH_EC3104 -#include -#elif defined (CONFIG_SH_BIGSUR) -#include -#else /* * This assumes you have a 1.8432 MHz clock for your UART. * @@ -41,5 +36,4 @@ #endif -#endif #endif /* _ASM_SERIAL_H */