ARM: dts: add device tree for Mecer Xtreme Mini S6

The Mecer Xtreme Mini S6 features a Rockchip RK3229 SoC,
1GB DDR3 RAM, 8GB eMMC, MicroSD port, 10/100Mbps Ethernet,
Realtek 8723BS WLAN module, 2 x USB 2.0 ports, HDMI output,
and S/PDIF output.

Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Documentation/devicetree/bindings/arm/rockchip.yaml

@@ -359,6 +359,11 @@ properties:
               - khadas,edge-v
           - const: rockchip,rk3399
 
+      - description: Mecer Xtreme Mini S6
+        items:
+          - const: mecer,xms6
+          - const: rockchip,rk3229
+
       - description: mqmaker MiQi
         items:
           - const: mqmaker,miqi

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -549,6 +549,8 @@ patternProperties:
     description: mCube
   "^meas,.*":
     description: Measurement Specialties
+  "^mecer,.*":
+    description: Mustek Limited
   "^mediatek,.*":
     description: MediaTek Inc.
   "^megachips,.*":

arch/arm/boot/dts/Makefile

@@ -905,6 +905,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3188-radxarock.dtb \
 	rk3228-evb.dtb \
 	rk3229-evb.dtb \
+	rk3229-xms6.dtb \
 	rk3288-evb-act8846.dtb \
 	rk3288-evb-rk808.dtb \
 	rk3288-fennec.dtb \

arch/arm/boot/dts/rk3229-xms6.dts

@@ -0,0 +1,283 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "rk3229.dtsi"
+
+/ {
+	model = "Mecer Xtreme Mini S6";
+	compatible = "mecer,xms6", "rockchip,rk3229";
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	ext_gmac: ext_gmac {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	power-led {
+		compatible = "gpio-leds";
+
+		blue {
+			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		regulator-name = "vcc_phy";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vccio_1v8>;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vccio_1v8: vccio-1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vccio_3v3: vccio-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_arm: vdd-arm-regulator {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
+		regulator-name = "vdd_arm";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_log: vdd-log-regulator {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC_SRC>;
+	assigned-clock-rates = <50000000>;
+	clock_in_out = "output";
+	phy-handle = <&phy>;
+	phy-mode = "rmii";
+	phy-supply = <&vcc_phy>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: phy@0 {
+			compatible = "ethernet-phy-id1234.d400",
+			             "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			clocks = <&cru SCLK_MAC_PHY>;
+			phy-is-integrated;
+			resets = <&cru SRST_MACPHY>;
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_log>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_phy {
+	status = "okay";
+};
+
+&iep_mmu {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	vccio1-supply = <&vccio_3v3>;
+	vccio2-supply = <&vccio_1v8>;
+	vccio4-supply = <&vccio_3v3>;
+};
+
+&pinctrl {
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sdmmc {
+	cap-mmc-highspeed;
+	disable-wp;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc_host>;
+		status = "okay";
+	};
+
+	u2phy0_otg: otg-port {
+		phy-supply = <&vcc_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc_host>;
+		status = "okay";
+	};
+
+	u2phy1_otg: otg-port {
+		phy-supply = <&vcc_host>;
+		status = "okay";
+	};
+};
+
+&uart2 {
+	pinctrl-0 = <&uart21_xfer>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host2_ehci {
+	status = "okay";
+};
+
+&usb_host2_ohci {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};