dt-bindings: Another pass removing cases of 'allOf' containing a '$ref'

Another pass at removing unnecessary use of 'allOf' with a '$ref'. json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Guenter Roeck <groeck@chromium.org> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Marek Behún <kabel@kernel.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220228213802.1639658-1-robh@kernel.org
2024-11-24 21:21:41 +00:00 · 2022-02-28 15:38:02 -06:00 · 2022-02-28 15:38:02 -06:00 · dca669354e
commit dca669354e
parent 53157759f5
20 changed files with 36 additions and 69 deletions
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@ -104,8 +104,7 @@ properties:
      - "1.5A" and "3.0A", 5V 1.5A and 5V 3.0A respectively, as defined in USB
        Type-C Cable and Connector specification, when Power Delivery is not
        supported.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string
+    $ref: /schemas/types.yaml#/definitions/string
    enum:
      - default
      - 1.5A
--- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
@ -72,8 +72,7 @@ properties:
      - const: hpd-removed

  ddc:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
    description: >
      Phandle of the I2C controller used for DDC EDID probing

--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
@ -76,9 +76,8 @@ properties:

  adi,input-depth:
    description: Number of bits per color component at the input.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 8, 10, 12 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 8, 10, 12 ]

  adi,input-colorspace:
    description: Input color space.
--- a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
@ -26,9 +26,8 @@ properties:
  reg-io-width:
    description:
      Width (in bytes) of the registers specified by the reg property.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [1, 4]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 4]
    default: 1

  clocks:
--- a/Documentation/devicetree/bindings/display/panel/display-timings.yaml
+++ b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
@ -31,8 +31,7 @@ properties:
 patternProperties:
  "^timing":
    type: object
-    allOf:
-      - $ref: panel-timing.yaml#
+    $ref: panel-timing.yaml#

 additionalProperties: false

--- a/Documentation/devicetree/bindings/display/ste,mcde.yaml
+++ b/Documentation/devicetree/bindings/display/ste,mcde.yaml
@ -58,8 +58,8 @@ patternProperties:
  "^dsi@[0-9a-f]+$":
    description: subnodes for the three DSI host adapters
    type: object
-    allOf:
-      - $ref: dsi-controller.yaml#
+    $ref: dsi-controller.yaml#
+
    properties:
      compatible:
        const: ste,mcde-dsi
--- a/Documentation/devicetree/bindings/input/adc-joystick.yaml
+++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml
@ -61,11 +61,10 @@ patternProperties:
        description: EV_ABS specific event code generated by the axis.

      abs-range:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - items:
-              - description: minimum value
-              - description: maximum value
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: minimum value
+          - description: maximum value
        description: >
          Minimum and maximum values produced by the axis.
          For an ABS_X axis this will be the left-most and right-most
--- a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
+++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
@ -32,8 +32,7 @@ properties:
 patternProperties:
  "^multi-led@[0-9a-b]$":
    type: object
-    allOf:
-      - $ref: leds-class-multicolor.yaml#
+    $ref: leds-class-multicolor.yaml#
    description:
      This node represents one of the RGB LED devices on Turris Omnia.
      No subnodes need to be added for subchannels since this controller only
--- a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
@ -55,8 +55,7 @@ properties:
 patternProperties:
  '^multi-led@[0-9a-f]$':
    type: object
-    allOf:
-      - $ref: leds-class-multicolor.yaml#
+    $ref: leds-class-multicolor.yaml#
    properties:
      reg:
        minItems: 1
--- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
@ -38,18 +38,14 @@ properties:
    description:
      This property specifies the delay in usecs between the
      assertion of the CS and the first clock pulse.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 0
-      - minimum: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0

  google,cros-ec-spi-msg-delay:
    description:
      This property specifies the delay in usecs between messages.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 0
-      - minimum: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0

  google,has-vbc-nvram:
    description:
--- a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
@ -96,8 +96,7 @@ patternProperties:

      rockchip,boot-ecc-strength:
        enum: [16, 24, 40, 60, 70]
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
        description: |
          If specified it indicates that a different BCH/ECC setting is
          supported by the boot ROM.
--- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@ -88,8 +88,7 @@ properties:
        type: object
        description: CPSW external ports

-        allOf:
-          - $ref: ethernet-controller.yaml#
+        $ref: ethernet-controller.yaml#

        properties:
          reg:
--- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
@ -76,8 +76,7 @@ patternProperties:

      connector:
        type: object
-        allOf:
-          - $ref: ../connector/usb-connector.yaml
+        $ref: /schemas/connector/usb-connector.yaml
        properties:
          vbus-supply: true

--- a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
+++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
@ -46,9 +46,7 @@ additionalProperties: false
 patternProperties:
  "^i2c@[1-4]$":
    type: object
-
-    allOf:
-      - $ref: /schemas/i2c/i2c-controller.yaml#
+    $ref: /schemas/i2c/i2c-controller.yaml#

 examples:
  - |
--- a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
@ -95,8 +95,7 @@ patternProperties:
      addresses. Cache and memory access settings are provided through a
      Memory Protection Unit (MPU), programmable only from the R5Fs.

-    allOf:
-      - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+    $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#

    properties:
      compatible:
--- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
+++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
@ -281,10 +281,7 @@ patternProperties:
      PRUSS INTC Node. Each PRUSS has a single interrupt controller instance
      that is common to all the PRU cores. This should be represented as an
      interrupt-controller node.
-
-    allOf:
-      - $ref: /schemas/interrupt-controller/ti,pruss-intc.yaml#
-
+    $ref: /schemas/interrupt-controller/ti,pruss-intc.yaml#
    type: object

  mdio@[a-f0-9]+$:
@ -292,10 +289,7 @@ patternProperties:
      MDIO Node. Each PRUSS has an MDIO module that can be used to control
      external PHYs. The MDIO module used within the PRU-ICSS is an instance of
      the MDIO Controller used in TI Davinci SoCs.
-
-    allOf:
-      - $ref: /schemas/net/ti,davinci-mdio.yaml#
-
+    $ref: /schemas/net/ti,davinci-mdio.yaml#
    type: object

  "^(pru|rtu|txpru)@[0-9a-f]+$":
@ -305,10 +299,7 @@ patternProperties:
      inactive by using the standard DT string property, "status". The ICSSG IP
      present on K3 SoCs have additional auxiliary PRU cores with slightly
      different IP integration.
-
-    allOf:
-      - $ref: /schemas/remoteproc/ti,pru-rproc.yaml#
-
+    $ref: /schemas/remoteproc/ti,pru-rproc.yaml#
    type: object

 required:
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
@ -115,8 +115,7 @@ patternProperties:
          By default, custom protocol is assumed, meaning that protocol is
          configured according to protocol defined in related DAI link node,
          such as i2s, left justified, right justified, dsp and pdm protocols.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/flag
+        $ref: /schemas/types.yaml#/definitions/flag

      "#clock-cells":
        description: Configure the SAI device as master clock provider.
--- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
+++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
@ -176,13 +176,12 @@ patternProperties:
       4 - Drive weak low and active high
       5 - Drive Hi-Z and active high

-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 2
-        maxItems: 2
-        items:
-          maximum: 15
-        default: [2, 2]
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    items:
+      maximum: 15
+    default: [2, 2]

 required:
  - compatible
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@ -93,9 +93,7 @@ properties:
 patternProperties:
  "^.*@[0-9a-f]+$":
    type: object
-
-    allOf:
-      - $ref: spi-peripheral-props.yaml
+    $ref: spi-peripheral-props.yaml

    required:
      - compatible
--- a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
+++ b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
@ -32,9 +32,7 @@ properties:

  connector:
    type: object
-
-    allOf:
-      - $ref: ../connector/usb-connector.yaml
+    $ref: /schemas/connector/usb-connector.yaml#

    properties:
      compatible: