mirror of
https://github.com/torvalds/linux.git
synced 2024-11-24 13:11:40 +00:00
hwmon: Driver for MAX31730
MAX31730 is a 3-Channel Remote Temperature Sensor. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
parent
002c6b545b
commit
d21ed22ba7
@ -108,6 +108,7 @@ Hardware Monitoring Kernel Drivers
|
||||
max197
|
||||
max20751
|
||||
max31722
|
||||
max31730
|
||||
max31785
|
||||
max31790
|
||||
max34440
|
||||
|
44
Documentation/hwmon/max31730.rst
Normal file
44
Documentation/hwmon/max31730.rst
Normal file
@ -0,0 +1,44 @@
|
||||
Kernel driver max31790
|
||||
======================
|
||||
|
||||
Supported chips:
|
||||
|
||||
* Maxim MAX31730
|
||||
|
||||
Prefix: 'max31730'
|
||||
|
||||
Addresses scanned: 0x1c, 0x1d, 0x1e, 0x1f, 0x4c, 0x4d, 0x4e, 0x4f
|
||||
|
||||
Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31730.pdf
|
||||
|
||||
Author: Guenter Roeck <linux@roeck-us.net>
|
||||
|
||||
|
||||
Description
|
||||
-----------
|
||||
|
||||
This driver implements support for Maxim MAX31730.
|
||||
|
||||
The MAX31730 temperature sensor monitors its own temperature and the
|
||||
temperatures of three external diode-connected transistors. The operating
|
||||
supply voltage is from 3.0V to 3.6V. Resistance cancellation compensates
|
||||
for high series resistance in circuit-board traces and the external thermal
|
||||
diode, while beta compensation corrects for temperature-measurement
|
||||
errors due to low-beta sensing transistors.
|
||||
|
||||
|
||||
Sysfs entries
|
||||
-------------
|
||||
|
||||
=================== == =======================================================
|
||||
temp[1-4]_enable RW Temperature enable/disable
|
||||
Set to 0 to enable channel, 0 to disable
|
||||
temp[1-4]_input RO Temperature input
|
||||
temp[2-4]_fault RO Fault indicator for remote channels
|
||||
temp[1-4]_max RW Maximum temperature
|
||||
temp[1-4]_max_alarm RW Maximum temperature alarm
|
||||
temp[1-4]_min RW Minimum temperature. Common for all channels.
|
||||
Only temp1_min is writeable.
|
||||
temp[1-4]_min_alarm RO Minimum temperature alarm
|
||||
temp[2-4]_offset RW Temperature offset for remote channels
|
||||
=================== == =======================================================
|
@ -889,7 +889,7 @@ config SENSORS_MAX197
|
||||
will be called max197.
|
||||
|
||||
config SENSORS_MAX31722
|
||||
tristate "MAX31722 temperature sensor"
|
||||
tristate "MAX31722 temperature sensor"
|
||||
depends on SPI
|
||||
help
|
||||
Support for the Maxim Integrated MAX31722/MAX31723 digital
|
||||
@ -898,6 +898,16 @@ tristate "MAX31722 temperature sensor"
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called max31722.
|
||||
|
||||
config SENSORS_MAX31730
|
||||
tristate "MAX31730 temperature sensor"
|
||||
depends on I2C
|
||||
help
|
||||
Support for the Maxim Integrated MAX31730 3-Channel Remote
|
||||
Temperature Sensor.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called max31730.
|
||||
|
||||
config SENSORS_MAX6621
|
||||
tristate "Maxim MAX6621 sensor chip"
|
||||
depends on I2C
|
||||
|
@ -123,6 +123,7 @@ obj-$(CONFIG_SENSORS_MAX1619) += max1619.o
|
||||
obj-$(CONFIG_SENSORS_MAX1668) += max1668.o
|
||||
obj-$(CONFIG_SENSORS_MAX197) += max197.o
|
||||
obj-$(CONFIG_SENSORS_MAX31722) += max31722.o
|
||||
obj-$(CONFIG_SENSORS_MAX31730) += max31730.o
|
||||
obj-$(CONFIG_SENSORS_MAX6621) += max6621.o
|
||||
obj-$(CONFIG_SENSORS_MAX6639) += max6639.o
|
||||
obj-$(CONFIG_SENSORS_MAX6642) += max6642.o
|
||||
|
440
drivers/hwmon/max31730.c
Normal file
440
drivers/hwmon/max31730.c
Normal file
@ -0,0 +1,440 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
/*
|
||||
* Driver for MAX31730 3-Channel Remote Temperature Sensor
|
||||
*
|
||||
* Copyright (c) 2019 Guenter Roeck <linux@roeck-us.net>
|
||||
*/
|
||||
|
||||
#include <linux/bits.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/hwmon.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
/* Addresses scanned */
|
||||
static const unsigned short normal_i2c[] = { 0x1c, 0x1d, 0x1e, 0x1f, 0x4c,
|
||||
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
|
||||
|
||||
/* The MAX31730 registers */
|
||||
#define MAX31730_REG_TEMP 0x00
|
||||
#define MAX31730_REG_CONF 0x13
|
||||
#define MAX31730_STOP BIT(7)
|
||||
#define MAX31730_EXTRANGE BIT(1)
|
||||
#define MAX31730_REG_TEMP_OFFSET 0x16
|
||||
#define MAX31730_TEMP_OFFSET_BASELINE 0x77
|
||||
#define MAX31730_REG_OFFSET_ENABLE 0x17
|
||||
#define MAX31730_REG_TEMP_MAX 0x20
|
||||
#define MAX31730_REG_TEMP_MIN 0x30
|
||||
#define MAX31730_REG_STATUS_HIGH 0x32
|
||||
#define MAX31730_REG_STATUS_LOW 0x33
|
||||
#define MAX31730_REG_CHANNEL_ENABLE 0x35
|
||||
#define MAX31730_REG_TEMP_FAULT 0x36
|
||||
|
||||
#define MAX31730_REG_MFG_ID 0x50
|
||||
#define MAX31730_MFG_ID 0x4d
|
||||
#define MAX31730_REG_MFG_REV 0x51
|
||||
#define MAX31730_MFG_REV 0x01
|
||||
|
||||
#define MAX31730_TEMP_MIN (-128000)
|
||||
#define MAX31730_TEMP_MAX 127937
|
||||
|
||||
/* Each client has this additional data */
|
||||
struct max31730_data {
|
||||
struct i2c_client *client;
|
||||
u8 orig_conf;
|
||||
u8 current_conf;
|
||||
u8 offset_enable;
|
||||
u8 channel_enable;
|
||||
};
|
||||
|
||||
/*-----------------------------------------------------------------------*/
|
||||
|
||||
static inline long max31730_reg_to_mc(s16 temp)
|
||||
{
|
||||
return DIV_ROUND_CLOSEST((temp >> 4) * 1000, 16);
|
||||
}
|
||||
|
||||
static int max31730_write_config(struct max31730_data *data, u8 set_mask,
|
||||
u8 clr_mask)
|
||||
{
|
||||
u8 value;
|
||||
|
||||
clr_mask |= MAX31730_EXTRANGE;
|
||||
value = data->current_conf & ~clr_mask;
|
||||
value |= set_mask;
|
||||
|
||||
if (data->current_conf != value) {
|
||||
s32 err;
|
||||
|
||||
err = i2c_smbus_write_byte_data(data->client, MAX31730_REG_CONF,
|
||||
value);
|
||||
if (err)
|
||||
return err;
|
||||
data->current_conf = value;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int max31730_set_enable(struct i2c_client *client, int reg,
|
||||
u8 *confdata, int channel, bool enable)
|
||||
{
|
||||
u8 regval = *confdata;
|
||||
int err;
|
||||
|
||||
if (enable)
|
||||
regval |= BIT(channel);
|
||||
else
|
||||
regval &= ~BIT(channel);
|
||||
|
||||
if (regval != *confdata) {
|
||||
err = i2c_smbus_write_byte_data(client, reg, regval);
|
||||
if (err)
|
||||
return err;
|
||||
*confdata = regval;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int max31730_set_offset_enable(struct max31730_data *data, int channel,
|
||||
bool enable)
|
||||
{
|
||||
return max31730_set_enable(data->client, MAX31730_REG_OFFSET_ENABLE,
|
||||
&data->offset_enable, channel, enable);
|
||||
}
|
||||
|
||||
static int max31730_set_channel_enable(struct max31730_data *data, int channel,
|
||||
bool enable)
|
||||
{
|
||||
return max31730_set_enable(data->client, MAX31730_REG_CHANNEL_ENABLE,
|
||||
&data->channel_enable, channel, enable);
|
||||
}
|
||||
|
||||
static int max31730_read(struct device *dev, enum hwmon_sensor_types type,
|
||||
u32 attr, int channel, long *val)
|
||||
{
|
||||
struct max31730_data *data = dev_get_drvdata(dev);
|
||||
int regval, reg, offset;
|
||||
|
||||
if (type != hwmon_temp)
|
||||
return -EINVAL;
|
||||
|
||||
switch (attr) {
|
||||
case hwmon_temp_input:
|
||||
if (!(data->channel_enable & BIT(channel)))
|
||||
return -ENODATA;
|
||||
reg = MAX31730_REG_TEMP + (channel * 2);
|
||||
break;
|
||||
case hwmon_temp_max:
|
||||
reg = MAX31730_REG_TEMP_MAX + (channel * 2);
|
||||
break;
|
||||
case hwmon_temp_min:
|
||||
reg = MAX31730_REG_TEMP_MIN;
|
||||
break;
|
||||
case hwmon_temp_enable:
|
||||
*val = !!(data->channel_enable & BIT(channel));
|
||||
return 0;
|
||||
case hwmon_temp_offset:
|
||||
if (!channel)
|
||||
return -EINVAL;
|
||||
if (!(data->offset_enable & BIT(channel))) {
|
||||
*val = 0;
|
||||
return 0;
|
||||
}
|
||||
offset = i2c_smbus_read_byte_data(data->client,
|
||||
MAX31730_REG_TEMP_OFFSET);
|
||||
if (offset < 0)
|
||||
return offset;
|
||||
*val = (offset - MAX31730_TEMP_OFFSET_BASELINE) * 125;
|
||||
return 0;
|
||||
case hwmon_temp_fault:
|
||||
regval = i2c_smbus_read_byte_data(data->client,
|
||||
MAX31730_REG_TEMP_FAULT);
|
||||
if (regval < 0)
|
||||
return regval;
|
||||
*val = !!(regval & BIT(channel));
|
||||
return 0;
|
||||
case hwmon_temp_min_alarm:
|
||||
regval = i2c_smbus_read_byte_data(data->client,
|
||||
MAX31730_REG_STATUS_LOW);
|
||||
if (regval < 0)
|
||||
return regval;
|
||||
*val = !!(regval & BIT(channel));
|
||||
return 0;
|
||||
case hwmon_temp_max_alarm:
|
||||
regval = i2c_smbus_read_byte_data(data->client,
|
||||
MAX31730_REG_STATUS_HIGH);
|
||||
if (regval < 0)
|
||||
return regval;
|
||||
*val = !!(regval & BIT(channel));
|
||||
return 0;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
regval = i2c_smbus_read_word_swapped(data->client, reg);
|
||||
if (regval < 0)
|
||||
return regval;
|
||||
|
||||
*val = max31730_reg_to_mc(regval);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int max31730_write(struct device *dev, enum hwmon_sensor_types type,
|
||||
u32 attr, int channel, long val)
|
||||
{
|
||||
struct max31730_data *data = dev_get_drvdata(dev);
|
||||
int reg, err;
|
||||
|
||||
if (type != hwmon_temp)
|
||||
return -EINVAL;
|
||||
|
||||
switch (attr) {
|
||||
case hwmon_temp_max:
|
||||
reg = MAX31730_REG_TEMP_MAX + channel * 2;
|
||||
break;
|
||||
case hwmon_temp_min:
|
||||
reg = MAX31730_REG_TEMP_MIN;
|
||||
break;
|
||||
case hwmon_temp_enable:
|
||||
if (val != 0 && val != 1)
|
||||
return -EINVAL;
|
||||
return max31730_set_channel_enable(data, channel, val);
|
||||
case hwmon_temp_offset:
|
||||
val = clamp_val(val, -14875, 17000) + 14875;
|
||||
val = DIV_ROUND_CLOSEST(val, 125);
|
||||
err = max31730_set_offset_enable(data, channel,
|
||||
val != MAX31730_TEMP_OFFSET_BASELINE);
|
||||
if (err)
|
||||
return err;
|
||||
return i2c_smbus_write_byte_data(data->client,
|
||||
MAX31730_REG_TEMP_OFFSET, val);
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
val = clamp_val(val, MAX31730_TEMP_MIN, MAX31730_TEMP_MAX);
|
||||
val = DIV_ROUND_CLOSEST(val << 4, 1000) << 4;
|
||||
|
||||
return i2c_smbus_write_word_swapped(data->client, reg, (u16)val);
|
||||
}
|
||||
|
||||
static umode_t max31730_is_visible(const void *data,
|
||||
enum hwmon_sensor_types type,
|
||||
u32 attr, int channel)
|
||||
{
|
||||
switch (type) {
|
||||
case hwmon_temp:
|
||||
switch (attr) {
|
||||
case hwmon_temp_input:
|
||||
case hwmon_temp_min_alarm:
|
||||
case hwmon_temp_max_alarm:
|
||||
case hwmon_temp_fault:
|
||||
return 0444;
|
||||
case hwmon_temp_min:
|
||||
return channel ? 0444 : 0644;
|
||||
case hwmon_temp_offset:
|
||||
case hwmon_temp_enable:
|
||||
case hwmon_temp_max:
|
||||
return 0644;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct hwmon_channel_info *max31730_info[] = {
|
||||
HWMON_CHANNEL_INFO(chip,
|
||||
HWMON_C_REGISTER_TZ),
|
||||
HWMON_CHANNEL_INFO(temp,
|
||||
HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
|
||||
HWMON_T_ENABLE |
|
||||
HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM,
|
||||
HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
|
||||
HWMON_T_OFFSET | HWMON_T_ENABLE |
|
||||
HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM |
|
||||
HWMON_T_FAULT,
|
||||
HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
|
||||
HWMON_T_OFFSET | HWMON_T_ENABLE |
|
||||
HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM |
|
||||
HWMON_T_FAULT,
|
||||
HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
|
||||
HWMON_T_OFFSET | HWMON_T_ENABLE |
|
||||
HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM |
|
||||
HWMON_T_FAULT
|
||||
),
|
||||
NULL
|
||||
};
|
||||
|
||||
static const struct hwmon_ops max31730_hwmon_ops = {
|
||||
.is_visible = max31730_is_visible,
|
||||
.read = max31730_read,
|
||||
.write = max31730_write,
|
||||
};
|
||||
|
||||
static const struct hwmon_chip_info max31730_chip_info = {
|
||||
.ops = &max31730_hwmon_ops,
|
||||
.info = max31730_info,
|
||||
};
|
||||
|
||||
static void max31730_remove(void *data)
|
||||
{
|
||||
struct max31730_data *max31730 = data;
|
||||
struct i2c_client *client = max31730->client;
|
||||
|
||||
i2c_smbus_write_byte_data(client, MAX31730_REG_CONF,
|
||||
max31730->orig_conf);
|
||||
}
|
||||
|
||||
static int
|
||||
max31730_probe(struct i2c_client *client, const struct i2c_device_id *id)
|
||||
{
|
||||
struct device *dev = &client->dev;
|
||||
struct device *hwmon_dev;
|
||||
struct max31730_data *data;
|
||||
int status, err;
|
||||
|
||||
if (!i2c_check_functionality(client->adapter,
|
||||
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
|
||||
return -EIO;
|
||||
|
||||
data = devm_kzalloc(dev, sizeof(struct max31730_data), GFP_KERNEL);
|
||||
if (!data)
|
||||
return -ENOMEM;
|
||||
|
||||
data->client = client;
|
||||
|
||||
/* Cache original configuration and enable status */
|
||||
status = i2c_smbus_read_byte_data(client, MAX31730_REG_CHANNEL_ENABLE);
|
||||
if (status < 0)
|
||||
return status;
|
||||
data->channel_enable = status;
|
||||
|
||||
status = i2c_smbus_read_byte_data(client, MAX31730_REG_OFFSET_ENABLE);
|
||||
if (status < 0)
|
||||
return status;
|
||||
data->offset_enable = status;
|
||||
|
||||
status = i2c_smbus_read_byte_data(client, MAX31730_REG_CONF);
|
||||
if (status < 0)
|
||||
return status;
|
||||
data->orig_conf = status;
|
||||
data->current_conf = status;
|
||||
|
||||
err = max31730_write_config(data,
|
||||
data->channel_enable ? 0 : MAX31730_STOP,
|
||||
data->channel_enable ? MAX31730_STOP : 0);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
dev_set_drvdata(dev, data);
|
||||
|
||||
err = devm_add_action_or_reset(dev, max31730_remove, data);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
|
||||
data,
|
||||
&max31730_chip_info,
|
||||
NULL);
|
||||
return PTR_ERR_OR_ZERO(hwmon_dev);
|
||||
}
|
||||
|
||||
static const struct i2c_device_id max31730_ids[] = {
|
||||
{ "max31730", 0, },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, max31730_ids);
|
||||
|
||||
static const struct of_device_id __maybe_unused max31730_of_match[] = {
|
||||
{
|
||||
.compatible = "maxim,max31730",
|
||||
},
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, max31730_of_match);
|
||||
|
||||
static bool max31730_check_reg_temp(struct i2c_client *client,
|
||||
int reg)
|
||||
{
|
||||
int regval;
|
||||
|
||||
regval = i2c_smbus_read_byte_data(client, reg + 1);
|
||||
return regval < 0 || (regval & 0x0f);
|
||||
}
|
||||
|
||||
/* Return 0 if detection is successful, -ENODEV otherwise */
|
||||
static int max31730_detect(struct i2c_client *client,
|
||||
struct i2c_board_info *info)
|
||||
{
|
||||
struct i2c_adapter *adapter = client->adapter;
|
||||
int regval;
|
||||
int i;
|
||||
|
||||
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
|
||||
I2C_FUNC_SMBUS_WORD_DATA))
|
||||
return -ENODEV;
|
||||
|
||||
regval = i2c_smbus_read_byte_data(client, MAX31730_REG_MFG_ID);
|
||||
if (regval != MAX31730_MFG_ID)
|
||||
return -ENODEV;
|
||||
regval = i2c_smbus_read_byte_data(client, MAX31730_REG_MFG_REV);
|
||||
if (regval != MAX31730_MFG_REV)
|
||||
return -ENODEV;
|
||||
|
||||
/* lower 4 bit of temperature and limit registers must be 0 */
|
||||
if (max31730_check_reg_temp(client, MAX31730_REG_TEMP_MIN))
|
||||
return -ENODEV;
|
||||
|
||||
for (i = 0; i < 4; i++) {
|
||||
if (max31730_check_reg_temp(client, MAX31730_REG_TEMP + i * 2))
|
||||
return -ENODEV;
|
||||
if (max31730_check_reg_temp(client,
|
||||
MAX31730_REG_TEMP_MAX + i * 2))
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
strlcpy(info->type, "max31730", I2C_NAME_SIZE);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __maybe_unused max31730_suspend(struct device *dev)
|
||||
{
|
||||
struct max31730_data *data = dev_get_drvdata(dev);
|
||||
|
||||
return max31730_write_config(data, MAX31730_STOP, 0);
|
||||
}
|
||||
|
||||
static int __maybe_unused max31730_resume(struct device *dev)
|
||||
{
|
||||
struct max31730_data *data = dev_get_drvdata(dev);
|
||||
|
||||
return max31730_write_config(data, 0, MAX31730_STOP);
|
||||
}
|
||||
|
||||
static SIMPLE_DEV_PM_OPS(max31730_pm_ops, max31730_suspend, max31730_resume);
|
||||
|
||||
static struct i2c_driver max31730_driver = {
|
||||
.class = I2C_CLASS_HWMON,
|
||||
.driver = {
|
||||
.name = "max31730",
|
||||
.of_match_table = of_match_ptr(max31730_of_match),
|
||||
.pm = &max31730_pm_ops,
|
||||
},
|
||||
.probe = max31730_probe,
|
||||
.id_table = max31730_ids,
|
||||
.detect = max31730_detect,
|
||||
.address_list = normal_i2c,
|
||||
};
|
||||
|
||||
module_i2c_driver(max31730_driver);
|
||||
|
||||
MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
|
||||
MODULE_DESCRIPTION("MAX31730 driver");
|
||||
MODULE_LICENSE("GPL");
|
Loading…
Reference in New Issue
Block a user