mirror of
https://github.com/torvalds/linux.git
synced 2024-12-27 13:22:23 +00:00
powerpc/4xx: Add suspend and idle support
Add suspend/resume support for 4xx compatible CPUs. See /sys/power/state for available power states configured in. Add two different idle states (idle-wait and idle-doze) controlled via sysfs. Default is idle-wait. cat /sys/devices/system/cpu/cpu0/idle [wait] doze To save additional power, use idle-doze. echo doze > /sys/devices/system/cpu/cpu0/idle cat /sys/devices/system/cpu/cpu0/idle wait [doze] Signed-off-by: Victor Gallardo <vgallardo@apm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
This commit is contained in:
Victor Gallardo
Josh Boyer
parent
46f5221049
commit
d164f6d4f9
52
Documentation/powerpc/dts-bindings/4xx/cpm.txt
Normal file
52
Documentation/powerpc/dts-bindings/4xx/cpm.txt
Normal file
@ -0,0 +1,52 @@
|
||||
PPC4xx Clock Power Management (CPM) node
|
||||
|
||||
Required properties:
|
||||
- compatible : compatible list, currently only "ibm,cpm"
|
||||
- dcr-access-method : "native"
|
||||
- dcr-reg : < DCR register range >
|
||||
|
||||
Optional properties:
|
||||
- er-offset : All 4xx SoCs with a CPM controller have
|
||||
one of two different order for the CPM
|
||||
registers. Some have the CPM registers
|
||||
in the following order (ER,FR,SR). The
|
||||
others have them in the following order
|
||||
(SR,ER,FR). For the second case set
|
||||
er-offset = <1>.
|
||||
- unused-units : specifier consist of one cell. For each
|
||||
bit in the cell, the corresponding bit
|
||||
in CPM will be set to turn off unused
|
||||
devices.
|
||||
- idle-doze : specifier consist of one cell. For each
|
||||
bit in the cell, the corresponding bit
|
||||
in CPM will be set to turn off unused
|
||||
devices. This is usually just CPM[CPU].
|
||||
- standby : specifier consist of one cell. For each
|
||||
bit in the cell, the corresponding bit
|
||||
in CPM will be set on standby and
|
||||
restored on resume.
|
||||
- suspend : specifier consist of one cell. For each
|
||||
bit in the cell, the corresponding bit
|
||||
in CPM will be set on suspend (mem) and
|
||||
restored on resume. Note, for standby
|
||||
and suspend the corresponding bits can
|
||||
be different or the same. Usually for
|
||||
standby only class 2 and 3 units are set.
|
||||
However, the interface does not care.
|
||||
If they are the same, the additional
|
||||
power saving will be seeing if support
|
||||
is available to put the DDR in self
|
||||
refresh mode and any additional power
|
||||
saving techniques for the specific SoC.
|
||||
|
||||
Example:
|
||||
CPM0: cpm {
|
||||
compatible = "ibm,cpm";
|
||||
dcr-access-method = "native";
|
||||
dcr-reg = <0x160 0x003>;
|
||||
er-offset = <0>;
|
||||
unused-units = <0x00000100>;
|
||||
idle-doze = <0x02000000>;
|
||||
standby = <0xfeff0000>;
|
||||
suspend = <0xfeff791d>;
|
||||
};
|
||||
@ -212,7 +212,7 @@ config ARCH_HIBERNATION_POSSIBLE
|
||||
config ARCH_SUSPEND_POSSIBLE
|
||||
def_bool y
|
||||
depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \
|
||||
PPC_85xx || PPC_86xx || PPC_PSERIES
|
||||
PPC_85xx || PPC_86xx || PPC_PSERIES || 44x || 40x
|
||||
|
||||
config PPC_DCR_NATIVE
|
||||
bool
|
||||
@ -598,13 +598,11 @@ config EXTRA_TARGETS
|
||||
|
||||
If unsure, leave blank
|
||||
|
||||
if !44x || BROKEN
|
||||
config ARCH_WANTS_FREEZER_CONTROL
|
||||
def_bool y
|
||||
depends on ADB_PMU
|
||||
|
||||
source kernel/power/Kconfig
|
||||
endif
|
||||
|
||||
config SECCOMP
|
||||
bool "Enable seccomp to safely compute untrusted bytecode"
|
||||
@ -685,6 +683,15 @@ config FSL_PMC
|
||||
Freescale MPC85xx/MPC86xx power management controller support
|
||||
(suspend/resume). For MPC83xx see platforms/83xx/suspend.c
|
||||
|
||||
config PPC4xx_CPM
|
||||
bool
|
||||
default y
|
||||
depends on SUSPEND && (44x || 40x)
|
||||
help
|
||||
PPC4xx Clock Power Management (CPM) support (suspend/resume).
|
||||
It also enables support for two different idle states (idle-wait
|
||||
and idle-doze).
|
||||
|
||||
config 4xx_SOC
|
||||
bool
|
||||
|
||||
|
||||
@ -1,4 +1,7 @@
|
||||
obj-$(CONFIG_44x) := misc_44x.o idle.o
|
||||
obj-$(CONFIG_44x) += misc_44x.o
|
||||
ifneq ($(CONFIG_PPC4xx_CPM),y)
|
||||
obj-$(CONFIG_44x) += idle.o
|
||||
endif
|
||||
obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o
|
||||
obj-$(CONFIG_EBONY) += ebony.o
|
||||
obj-$(CONFIG_SAM440EP) += sam440ep.o
|
||||
|
||||
@ -41,6 +41,7 @@ obj-$(CONFIG_OF_RTC) += of_rtc.o
|
||||
ifeq ($(CONFIG_PCI),y)
|
||||
obj-$(CONFIG_4xx) += ppc4xx_pci.o
|
||||
endif
|
||||
obj-$(CONFIG_PPC4xx_CPM) += ppc4xx_cpm.o
|
||||
obj-$(CONFIG_PPC4xx_GPIO) += ppc4xx_gpio.o
|
||||
|
||||
obj-$(CONFIG_CPM) += cpm_common.o
|
||||
|
||||
346
arch/powerpc/sysdev/ppc4xx_cpm.c
Normal file
346
arch/powerpc/sysdev/ppc4xx_cpm.c
Normal file
@ -0,0 +1,346 @@
|
||||
/*
|
||||
* PowerPC 4xx Clock and Power Management
|
||||
*
|
||||
* Copyright (C) 2010, Applied Micro Circuits Corporation
|
||||
* Victor Gallardo (vgallardo@apm.com)
|
||||
*
|
||||
* Based on arch/powerpc/platforms/44x/idle.c:
|
||||
* Jerone Young <jyoung5@us.ibm.com>
|
||||
* Copyright 2008 IBM Corp.
|
||||
*
|
||||
* Based on arch/powerpc/sysdev/fsl_pmc.c:
|
||||
* Anton Vorontsov <avorontsov@ru.mvista.com>
|
||||
* Copyright 2009 MontaVista Software, Inc.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/sysfs.h>
|
||||
#include <linux/cpu.h>
|
||||
#include <linux/suspend.h>
|
||||
#include <asm/dcr.h>
|
||||
#include <asm/dcr-native.h>
|
||||
#include <asm/machdep.h>
|
||||
|
||||
#define CPM_ER 0
|
||||
#define CPM_FR 1
|
||||
#define CPM_SR 2
|
||||
|
||||
#define CPM_IDLE_WAIT 0
|
||||
#define CPM_IDLE_DOZE 1
|
||||
|
||||
struct cpm {
|
||||
dcr_host_t dcr_host;
|
||||
unsigned int dcr_offset[3];
|
||||
unsigned int powersave_off;
|
||||
unsigned int unused;
|
||||
unsigned int idle_doze;
|
||||
unsigned int standby;
|
||||
unsigned int suspend;
|
||||
};
|
||||
|
||||
static struct cpm cpm;
|
||||
|
||||
struct cpm_idle_mode {
|
||||
unsigned int enabled;
|
||||
const char *name;
|
||||
};
|
||||
|
||||
static struct cpm_idle_mode idle_mode[] = {
|
||||
[CPM_IDLE_WAIT] = { 1, "wait" }, /* default */
|
||||
[CPM_IDLE_DOZE] = { 0, "doze" },
|
||||
};
|
||||
|
||||
static unsigned int cpm_set(unsigned int cpm_reg, unsigned int mask)
|
||||
{
|
||||
unsigned int value;
|
||||
|
||||
/* CPM controller supports 3 different types of sleep interface
|
||||
* known as class 1, 2 and 3. For class 1 units, they are
|
||||
* unconditionally put to sleep when the corresponding CPM bit is
|
||||
* set. For class 2 and 3 units this is not case; if they can be
|
||||
* put to to sleep, they will. Here we do not verify, we just
|
||||
* set them and expect them to eventually go off when they can.
|
||||
*/
|
||||
value = dcr_read(cpm.dcr_host, cpm.dcr_offset[cpm_reg]);
|
||||
dcr_write(cpm.dcr_host, cpm.dcr_offset[cpm_reg], value | mask);
|
||||
|
||||
/* return old state, to restore later if needed */
|
||||
return value;
|
||||
}
|
||||
|
||||
static void cpm_idle_wait(void)
|
||||
{
|
||||
unsigned long msr_save;
|
||||
|
||||
/* save off initial state */
|
||||
msr_save = mfmsr();
|
||||
/* sync required when CPM0_ER[CPU] is set */
|
||||
mb();
|
||||
/* set wait state MSR */
|
||||
mtmsr(msr_save|MSR_WE|MSR_EE|MSR_CE|MSR_DE);
|
||||
isync();
|
||||
/* return to initial state */
|
||||
mtmsr(msr_save);
|
||||
isync();
|
||||
}
|
||||
|
||||
static void cpm_idle_sleep(unsigned int mask)
|
||||
{
|
||||
unsigned int er_save;
|
||||
|
||||
/* update CPM_ER state */
|
||||
er_save = cpm_set(CPM_ER, mask);
|
||||
|
||||
/* go to wait state so that CPM0_ER[CPU] can take effect */
|
||||
cpm_idle_wait();
|
||||
|
||||
/* restore CPM_ER state */
|
||||
dcr_write(cpm.dcr_host, cpm.dcr_offset[CPM_ER], er_save);
|
||||
}
|
||||
|
||||
static void cpm_idle_doze(void)
|
||||
{
|
||||
cpm_idle_sleep(cpm.idle_doze);
|
||||
}
|
||||
|
||||
static void cpm_idle_config(int mode)
|
||||
{
|
||||
int i;
|
||||
|
||||
if (idle_mode[mode].enabled)
|
||||
return;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(idle_mode); i++)
|
||||
idle_mode[i].enabled = 0;
|
||||
|
||||
idle_mode[mode].enabled = 1;
|
||||
}
|
||||
|
||||
static ssize_t cpm_idle_show(struct kobject *kobj,
|
||||
struct kobj_attribute *attr, char *buf)
|
||||
{
|
||||
char *s = buf;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(idle_mode); i++) {
|
||||
if (idle_mode[i].enabled)
|
||||
s += sprintf(s, "[%s] ", idle_mode[i].name);
|
||||
else
|
||||
s += sprintf(s, "%s ", idle_mode[i].name);
|
||||
}
|
||||
|
||||
*(s-1) = '\n'; /* convert the last space to a newline */
|
||||
|
||||
return s - buf;
|
||||
}
|
||||
|
||||
static ssize_t cpm_idle_store(struct kobject *kobj,
|
||||
struct kobj_attribute *attr,
|
||||
const char *buf, size_t n)
|
||||
{
|
||||
int i;
|
||||
char *p;
|
||||
int len;
|
||||
|
||||
p = memchr(buf, '\n', n);
|
||||
len = p ? p - buf : n;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(idle_mode); i++) {
|
||||
if (strncmp(buf, idle_mode[i].name, len) == 0) {
|
||||
cpm_idle_config(i);
|
||||
return n;
|
||||
}
|
||||
}
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static struct kobj_attribute cpm_idle_attr =
|
||||
__ATTR(idle, 0644, cpm_idle_show, cpm_idle_store);
|
||||
|
||||
static void cpm_idle_config_sysfs(void)
|
||||
{
|
||||
struct sys_device *sys_dev;
|
||||
unsigned long ret;
|
||||
|
||||
sys_dev = get_cpu_sysdev(0);
|
||||
|
||||
ret = sysfs_create_file(&sys_dev->kobj,
|
||||
&cpm_idle_attr.attr);
|
||||
if (ret)
|
||||
printk(KERN_WARNING
|
||||
"cpm: failed to create idle sysfs entry\n");
|
||||
}
|
||||
|
||||
static void cpm_idle(void)
|
||||
{
|
||||
if (idle_mode[CPM_IDLE_DOZE].enabled)
|
||||
cpm_idle_doze();
|
||||
else
|
||||
cpm_idle_wait();
|
||||
}
|
||||
|
||||
static int cpm_suspend_valid(suspend_state_t state)
|
||||
{
|
||||
switch (state) {
|
||||
case PM_SUSPEND_STANDBY:
|
||||
return !!cpm.standby;
|
||||
case PM_SUSPEND_MEM:
|
||||
return !!cpm.suspend;
|
||||
default:
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
static void cpm_suspend_standby(unsigned int mask)
|
||||
{
|
||||
unsigned long tcr_save;
|
||||
|
||||
/* disable decrement interrupt */
|
||||
tcr_save = mfspr(SPRN_TCR);
|
||||
mtspr(SPRN_TCR, tcr_save & ~TCR_DIE);
|
||||
|
||||
/* go to sleep state */
|
||||
cpm_idle_sleep(mask);
|
||||
|
||||
/* restore decrement interrupt */
|
||||
mtspr(SPRN_TCR, tcr_save);
|
||||
}
|
||||
|
||||
static int cpm_suspend_enter(suspend_state_t state)
|
||||
{
|
||||
switch (state) {
|
||||
case PM_SUSPEND_STANDBY:
|
||||
cpm_suspend_standby(cpm.standby);
|
||||
break;
|
||||
case PM_SUSPEND_MEM:
|
||||
cpm_suspend_standby(cpm.suspend);
|
||||
break;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_suspend_ops cpm_suspend_ops = {
|
||||
.valid = cpm_suspend_valid,
|
||||
.enter = cpm_suspend_enter,
|
||||
};
|
||||
|
||||
static int cpm_get_uint_property(struct device_node *np,
|
||||
const char *name)
|
||||
{
|
||||
int len;
|
||||
const unsigned int *prop = of_get_property(np, name, &len);
|
||||
|
||||
if (prop == NULL || len < sizeof(u32))
|
||||
return 0;
|
||||
|
||||
return *prop;
|
||||
}
|
||||
|
||||
static int __init cpm_init(void)
|
||||
{
|
||||
struct device_node *np;
|
||||
int dcr_base, dcr_len;
|
||||
int ret = 0;
|
||||
|
||||
if (!cpm.powersave_off) {
|
||||
cpm_idle_config(CPM_IDLE_WAIT);
|
||||
ppc_md.power_save = &cpm_idle;
|
||||
}
|
||||
|
||||
np = of_find_compatible_node(NULL, NULL, "ibm,cpm");
|
||||
if (!np) {
|
||||
ret = -EINVAL;
|
||||
goto out;
|
||||
}
|
||||
|
||||
dcr_base = dcr_resource_start(np, 0);
|
||||
dcr_len = dcr_resource_len(np, 0);
|
||||
|
||||
if (dcr_base == 0 || dcr_len == 0) {
|
||||
printk(KERN_ERR "cpm: could not parse dcr property for %s\n",
|
||||
np->full_name);
|
||||
ret = -EINVAL;
|
||||
goto out;
|
||||
}
|
||||
|
||||
cpm.dcr_host = dcr_map(np, dcr_base, dcr_len);
|
||||
|
||||
if (!DCR_MAP_OK(cpm.dcr_host)) {
|
||||
printk(KERN_ERR "cpm: failed to map dcr property for %s\n",
|
||||
np->full_name);
|
||||
ret = -EINVAL;
|
||||
goto out;
|
||||
}
|
||||
|
||||
/* All 4xx SoCs with a CPM controller have one of two
|
||||
* different order for the CPM registers. Some have the
|
||||
* CPM registers in the following order (ER,FR,SR). The
|
||||
* others have them in the following order (SR,ER,FR).
|
||||
*/
|
||||
|
||||
if (cpm_get_uint_property(np, "er-offset") == 0) {
|
||||
cpm.dcr_offset[CPM_ER] = 0;
|
||||
cpm.dcr_offset[CPM_FR] = 1;
|
||||
cpm.dcr_offset[CPM_SR] = 2;
|
||||
} else {
|
||||
cpm.dcr_offset[CPM_ER] = 1;
|
||||
cpm.dcr_offset[CPM_FR] = 2;
|
||||
cpm.dcr_offset[CPM_SR] = 0;
|
||||
}
|
||||
|
||||
/* Now let's see what IPs to turn off for the following modes */
|
||||
|
||||
cpm.unused = cpm_get_uint_property(np, "unused-units");
|
||||
cpm.idle_doze = cpm_get_uint_property(np, "idle-doze");
|
||||
cpm.standby = cpm_get_uint_property(np, "standby");
|
||||
cpm.suspend = cpm_get_uint_property(np, "suspend");
|
||||
|
||||
/* If some IPs are unused let's turn them off now */
|
||||
|
||||
if (cpm.unused) {
|
||||
cpm_set(CPM_ER, cpm.unused);
|
||||
cpm_set(CPM_FR, cpm.unused);
|
||||
}
|
||||
|
||||
/* Now let's export interfaces */
|
||||
|
||||
if (!cpm.powersave_off && cpm.idle_doze)
|
||||
cpm_idle_config_sysfs();
|
||||
|
||||
if (cpm.standby || cpm.suspend)
|
||||
suspend_set_ops(&cpm_suspend_ops);
|
||||
out:
|
||||
if (np)
|
||||
of_node_put(np);
|
||||
return ret;
|
||||
}
|
||||
|
||||
late_initcall(cpm_init);
|
||||
|
||||
static int __init cpm_powersave_off(char *arg)
|
||||
{
|
||||
cpm.powersave_off = 1;
|
||||
return 0;
|
||||
}
|
||||
__setup("powersave=off", cpm_powersave_off);
|
||||
Loading…
Reference in New Issue
Block a user