Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-02 09:01:34 +00:00
Code Issues Packages Projects Releases Wiki Activity

ARM: OMAP3: VC: calculate ramp times

Browse Source 
OMAP3 VC code now uses voltage deltas + slew rates for calculating actual
ramp times for voltage changes. Previously a static value was used.
Two calculation methods are provided: i2c_timings and off_timings.
I2C timings are used during retention or off mode transition which
is initiated over I2C, and OFF timings are used if PMIC signal
(nsleep) is used to control all the off mode voltages at the same time.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
This commit is contained in:
Tero Kristo 2012-09-25 19:33:36 +03:00 committed by Kevin Hilman
parent 8b5d8c0d71
commit c589eb3869
2 changed files with 95 additions and 22 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

116
arch/arm/mach-omap2/vc.c
View File

@ -204,30 +204,110 @@ int omap_vc_bypass_scale(struct voltagedomain *voltdm,
return 0;
}
static void __init omap3_vfsm_init(struct voltagedomain *voltdm)
/**
* omap3_set_i2c_timings - sets i2c sleep timings for a channel
* @voltdm: channel to configure
* @off_mode: select whether retention or off mode values used
*
* Calculates and sets up voltage controller to use I2C based
* voltage scaling for sleep modes. This can be used for either off mode
* or retention. Off mode has additionally an option to use sys_off_mode
* pad, which uses a global signal to program the whole power IC to
* off-mode.
*/
static void omap3_set_i2c_timings(struct voltagedomain *voltdm, bool off_mode)
{
unsigned long voltsetup1;
u32 tgt_volt;
if (off_mode)
tgt_volt = voltdm->vc_param->off;
else
tgt_volt = voltdm->vc_param->ret;
voltsetup1 = (voltdm->vc_param->on - tgt_volt) /
voltdm->pmic->slew_rate;
voltsetup1 = voltsetup1 * voltdm->sys_clk.rate / 8 / 1000000 + 1;
voltdm->rmw(voltdm->vfsm->voltsetup_mask,
voltsetup1 << __ffs(voltdm->vfsm->voltsetup_mask),
voltdm->vfsm->voltsetup_reg);
/*
* Voltage Manager FSM parameters init
* XXX This data should be passed in from the board file
* pmic is not controlling the voltage scaling during retention,
* thus set voltsetup2 to 0
*/
voltdm->write(OMAP3_CLKSETUP, OMAP3_PRM_CLKSETUP_OFFSET);
voltdm->write(OMAP3_VOLTOFFSET, OMAP3_PRM_VOLTOFFSET_OFFSET);
voltdm->write(OMAP3_VOLTSETUP2, OMAP3_PRM_VOLTSETUP2_OFFSET);
voltdm->write(0, OMAP3_PRM_VOLTSETUP2_OFFSET);
}
/**
* omap3_set_off_timings - sets off-mode timings for a channel
* @voltdm: channel to configure
*
* Calculates and sets up off-mode timings for a channel. Off-mode
* can use either I2C based voltage scaling, or alternatively
* sys_off_mode pad can be used to send a global command to power IC.
* This function first checks which mode is being used, and calls
* omap3_set_i2c_timings() if the system is using I2C control mode.
* sys_off_mode has the additional benefit that voltages can be
* scaled to zero volt level with TWL4030 / TWL5030, I2C can only
* scale to 600mV.
*/
static void omap3_set_off_timings(struct voltagedomain *voltdm)
{
unsigned long clksetup;
unsigned long voltsetup2;
unsigned long voltsetup2_old;
u32 val;
/* check if sys_off_mode is used to control off-mode voltages */
val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET);
if (!(val & OMAP3430_SEL_OFF_MASK)) {
/* No, omap is controlling them over I2C */
omap3_set_i2c_timings(voltdm, true);
return;
}
clksetup = voltdm->read(OMAP3_PRM_CLKSETUP_OFFSET);
/* voltsetup 2 in us */
voltsetup2 = voltdm->vc_param->on / voltdm->pmic->slew_rate;
/* convert to 32k clk cycles */
voltsetup2 = DIV_ROUND_UP(voltsetup2 * 32768, 1000000);
voltsetup2_old = voltdm->read(OMAP3_PRM_VOLTSETUP2_OFFSET);
/*
* Update voltsetup2 if higher than current value (needed because
* we have multiple channels with different ramp times), also
* update voltoffset always to value recommended by TRM
*/
if (voltsetup2 > voltsetup2_old) {
voltdm->write(voltsetup2, OMAP3_PRM_VOLTSETUP2_OFFSET);
voltdm->write(clksetup - voltsetup2,
OMAP3_PRM_VOLTOFFSET_OFFSET);
} else
voltdm->write(clksetup - voltsetup2_old,
OMAP3_PRM_VOLTOFFSET_OFFSET);
/*
* omap is not controlling voltage scaling during off-mode,
* thus set voltsetup1 to 0
*/
voltdm->rmw(voltdm->vfsm->voltsetup_mask, 0,
voltdm->vfsm->voltsetup_reg);
/* voltoffset must be clksetup minus voltsetup2 according to TRM */
voltdm->write(clksetup - voltsetup2, OMAP3_PRM_VOLTOFFSET_OFFSET);
}
static void __init omap3_vc_init_channel(struct voltagedomain *voltdm)
{
static bool is_initialized;
if (is_initialized)
return;
omap3_vfsm_init(voltdm);
is_initialized = true;
omap3_set_off_timings(voltdm);
}
/* OMAP4 specific voltage init functions */
static void __init omap4_vc_init_channel(struct voltagedomain *voltdm)
{
@ -337,7 +417,6 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm)
vc->i2c_slave_addr = voltdm->pmic->i2c_slave_addr;
vc->volt_reg_addr = voltdm->pmic->volt_reg_addr;
vc->cmd_reg_addr = voltdm->pmic->cmd_reg_addr;
vc->setup_time = voltdm->pmic->volt_setup_time;
/* Configure the i2c slave address for this VC */
voltdm->rmw(vc->smps_sa_mask,
@ -376,11 +455,6 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm)
/* Channel configuration */
omap_vc_config_channel(voltdm);
/* Configure the setup times */
voltdm->rmw(voltdm->vfsm->voltsetup_mask,
vc->setup_time << __ffs(voltdm->vfsm->voltsetup_mask),
voltdm->vfsm->voltsetup_reg);
omap_vc_i2c_init(voltdm);
if (cpu_is_omap34xx())

1
arch/arm/mach-omap2/vc.h
View File

@ -86,7 +86,6 @@ struct omap_vc_channel {
u16 i2c_slave_addr;
u16 volt_reg_addr;
u16 cmd_reg_addr;
u16 setup_time;
u8 cfg_channel;
bool i2c_high_speed;