Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-24 13:11:40 +00:00
Code Issues Packages Projects Releases Wiki Activity

lguest: send trap 13 through to userspace.

Browse Source 
We copy 7 bytes at eip for userspace's instruction decode; we have to
carefully handle the case where eip is at the end of a page.  We can't
leave this to userspace since kernel has all the page table decode
logic.

The decode logic moves to userspace, basically unchanged.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This commit is contained in:
Rusty Russell 2015-02-11 15:15:10 +10:30
parent c9e433e4b8
commit c565650b10
2 changed files with 190 additions and 88 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

129
drivers/lguest/x86/core.c
View File

@ -314,95 +314,52 @@ void lguest_arch_run_guest(struct lg_cpu *cpu)
* usually attached to a PC.
*
* When the Guest uses one of these instructions, we get a trap (General
* Protection Fault) and come here. We see if it's one of those troublesome
* instructions and skip over it. We return true if we did.
* Protection Fault) and come here. We queue this to be sent out to the
* Launcher to handle.
*/
static int emulate_insn(struct lg_cpu *cpu)
/*
* The eip contains the *virtual* address of the Guest's instruction:
* we copy the instruction here so the Launcher doesn't have to walk
* the page tables to decode it. We handle the case (eg. in a kernel
* module) where the instruction is over two pages, and the pages are
* virtually but not physically contiguous.
*
* The longest possible x86 instruction is 15 bytes, but we don't handle
* anything that strange.
*/
static void copy_from_guest(struct lg_cpu *cpu,
void *dst, unsigned long vaddr, size_t len)
{
u8 insn;
unsigned int insnlen = 0, in = 0, small_operand = 0;
/*
* The eip contains the *virtual* address of the Guest's instruction:
* walk the Guest's page tables to find the "physical" address.
*/
unsigned long physaddr = guest_pa(cpu, cpu->regs->eip);
size_t to_page_end = PAGE_SIZE - (vaddr % PAGE_SIZE);
unsigned long paddr;
/*
* This must be the Guest kernel trying to do something, not userspace!
* The bottom two bits of the CS segment register are the privilege
* level.
*/
if ((cpu->regs->cs & 3) != GUEST_PL)
return 0;
BUG_ON(len > PAGE_SIZE);
/* Decoding x86 instructions is icky. */
insn = lgread(cpu, physaddr, u8);
/*
* Around 2.6.33, the kernel started using an emulation for the
* cmpxchg8b instruction in early boot on many configurations. This
* code isn't paravirtualized, and it tries to disable interrupts.
* Ignore it, which will Mostly Work.
*/
if (insn == 0xfa) {
/* "cli", or Clear Interrupt Enable instruction. Skip it. */
cpu->regs->eip++;
return 1;
/* If it goes over a page, copy in two parts. */
if (len > to_page_end) {
/* But make sure the next page is mapped! */
if (__guest_pa(cpu, vaddr + to_page_end, &paddr))
copy_from_guest(cpu, dst + to_page_end,
vaddr + to_page_end,
len - to_page_end);
else
/* Otherwise fill with zeroes. */
memset(dst + to_page_end, 0, len - to_page_end);
len = to_page_end;
}
/*
* 0x66 is an "operand prefix". It means a 16, not 32 bit in/out.
*/
if (insn == 0x66) {
small_operand = 1;
/* The instruction is 1 byte so far, read the next byte. */
insnlen = 1;
insn = lgread(cpu, physaddr + insnlen, u8);
}
/* This will kill the guest if it isn't mapped, but that
* shouldn't happen. */
__lgread(cpu, dst, guest_pa(cpu, vaddr), len);
}
/*
* We can ignore the lower bit for the moment and decode the 4 opcodes
* we need to emulate.
*/
switch (insn & 0xFE) {
case 0xE4: /* in <next byte>,%al */
insnlen += 2;
in = 1;
break;
case 0xEC: /* in (%dx),%al */
insnlen += 1;
in = 1;
break;
case 0xE6: /* out %al,<next byte> */
insnlen += 2;
break;
case 0xEE: /* out %al,(%dx) */
insnlen += 1;
break;
default:
/* OK, we don't know what this is, can't emulate. */
return 0;
}
/*
* If it was an "IN" instruction, they expect the result to be read
* into %eax, so we change %eax. We always return all-ones, which
* traditionally means "there's nothing there".
*/
if (in) {
/* Lower bit tells means it's a 32/16 bit access */
if (insn & 0x1) {
if (small_operand)
cpu->regs->eax |= 0xFFFF;
else
cpu->regs->eax = 0xFFFFFFFF;
} else
cpu->regs->eax |= 0xFF;
}
/* Finally, we've "done" the instruction, so move past it. */
cpu->regs->eip += insnlen;
/* Success! */
return 1;
static void setup_emulate_insn(struct lg_cpu *cpu)
{
cpu->pending.trap = 13;
copy_from_guest(cpu, cpu->pending.insn, cpu->regs->eip,
sizeof(cpu->pending.insn));
}
/*H:050 Once we've re-enabled interrupts, we look at why the Guest exited. */
@ -410,14 +367,10 @@ void lguest_arch_handle_trap(struct lg_cpu *cpu)
{
switch (cpu->regs->trapnum) {
case 13: /* We've intercepted a General Protection Fault. */
/*
* Check if this was one of those annoying IN or OUT
* instructions which we need to emulate. If so, we just go
* back into the Guest after we've done it.
*/
/* Hand to Launcher to emulate those pesky IN and OUT insns */
if (cpu->regs->errcode == 0) {
if (emulate_insn(cpu))
return;
setup_emulate_insn(cpu);
return;
}
break;
case 14: /* We've intercepted a Page Fault. */

149
tools/lguest/lguest.c
View File

@ -41,6 +41,7 @@
#include <signal.h>
#include <pwd.h>
#include <grp.h>
#include <sys/user.h>
#ifndef VIRTIO_F_ANY_LAYOUT
#define VIRTIO_F_ANY_LAYOUT 27
@ -1143,6 +1144,150 @@ static void handle_output(unsigned long addr)
strnlen(from_guest_phys(addr), guest_limit - addr));
}
/*L:216
* This is where we emulate a handful of Guest instructions. It's ugly
* and we used to do it in the kernel but it grew over time.
*/
/*
* We use the ptrace syscall's pt_regs struct to talk about registers
* to lguest: these macros convert the names to the offsets.
*/
#define getreg(name) getreg_off(offsetof(struct user_regs_struct, name))
#define setreg(name, val) \
setreg_off(offsetof(struct user_regs_struct, name), (val))
static u32 getreg_off(size_t offset)
{
u32 r;
unsigned long args[] = { LHREQ_GETREG, offset };
if (pwrite(lguest_fd, args, sizeof(args), cpu_id) < 0)
err(1, "Getting register %u", offset);
if (pread(lguest_fd, &r, sizeof(r), cpu_id) != sizeof(r))
err(1, "Reading register %u", offset);
return r;
}
static void setreg_off(size_t offset, u32 val)
{
unsigned long args[] = { LHREQ_SETREG, offset, val };
if (pwrite(lguest_fd, args, sizeof(args), cpu_id) < 0)
err(1, "Setting register %u", offset);
}
static void emulate_insn(const u8 insn[])
{
unsigned long args[] = { LHREQ_TRAP, 13 };
unsigned int insnlen = 0, in = 0, small_operand = 0, byte_access;
unsigned int eax, port, mask;
/*
* We always return all-ones on IO port reads, which traditionally
* means "there's nothing there".
*/
u32 val = 0xFFFFFFFF;
/*
* This must be the Guest kernel trying to do something, not userspace!
* The bottom two bits of the CS segment register are the privilege
* level.
*/
if ((getreg(xcs) & 3) != 0x1)
goto no_emulate;
/* Decoding x86 instructions is icky. */
/*
* Around 2.6.33, the kernel started using an emulation for the
* cmpxchg8b instruction in early boot on many configurations. This
* code isn't paravirtualized, and it tries to disable interrupts.
* Ignore it, which will Mostly Work.
*/
if (insn[insnlen] == 0xfa) {
/* "cli", or Clear Interrupt Enable instruction. Skip it. */
insnlen = 1;
goto skip_insn;
}
/*
* 0x66 is an "operand prefix". It means a 16, not 32 bit in/out.
*/
if (insn[insnlen] == 0x66) {
small_operand = 1;
/* The instruction is 1 byte so far, read the next byte. */
insnlen = 1;
}
/* If the lower bit isn't set, it's a single byte access */
byte_access = !(insn[insnlen] & 1);
/*
* Now we can ignore the lower bit and decode the 4 opcodes
* we need to emulate.
*/
switch (insn[insnlen] & 0xFE) {
case 0xE4: /* in <next byte>,%al */
port = insn[insnlen+1];
insnlen += 2;
in = 1;
break;
case 0xEC: /* in (%dx),%al */
port = getreg(edx) & 0xFFFF;
insnlen += 1;
in = 1;
break;
case 0xE6: /* out %al,<next byte> */
port = insn[insnlen+1];
insnlen += 2;
break;
case 0xEE: /* out %al,(%dx) */
port = getreg(edx) & 0xFFFF;
insnlen += 1;
break;
default:
/* OK, we don't know what this is, can't emulate. */
goto no_emulate;
}
/* Set a mask of the 1, 2 or 4 bytes, depending on size of IO */
if (byte_access)
mask = 0xFF;
else if (small_operand)
mask = 0xFFFF;
else
mask = 0xFFFFFFFF;
/*
* If it was an "IN" instruction, they expect the result to be read
* into %eax, so we change %eax.
*/
eax = getreg(eax);
if (in) {
/* Clear the bits we're about to read */
eax &= ~mask;
/* Copy bits in from val. */
eax |= val & mask;
/* Now update the register. */
setreg(eax, eax);
}
verbose("IO %s of %x to %u: %#08x\n",
in ? "IN" : "OUT", mask, port, eax);
skip_insn:
/* Finally, we've "done" the instruction, so move past it. */
setreg(eip, getreg(eip) + insnlen);
return;
no_emulate:
/* Inject trap into Guest. */
if (write(lguest_fd, args, sizeof(args)) < 0)
err(1, "Reinjecting trap 13 for fault at %#x", getreg(eip));
}
/*L:190
* Device Setup
*
@ -1832,6 +1977,10 @@ static void __attribute__((noreturn)) run_guest(void)
verbose("Notify on address %#08x\n",
notify.addr);
handle_output(notify.addr);
} else if (notify.trap == 13) {
verbose("Emulating instruction at %#x\n",
getreg(eip));
emulate_insn(notify.insn);
} else
errx(1, "Unknown trap %i addr %#08x\n",
notify.trap, notify.addr);