Char/Misc/IIO fixes for 6.12-rc4

Here are a number of small char/misc/iio driver fixes for 6.12-rc4.
 Included in here are the following:
   - loads of small iio driver fixes for reported problems
   - parport driver out-of-bounds fix
   - Kconfig description and MAINTAINERS file updates
 
 All of these, except for the Kconfig and MAINTAINERS file updates have
 been in linux-next all week.  Those other two are just documentation
 changes and will have no runtime issues and were merged on Friday.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZxUGYg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynTCQCggBy+iX/11utliIaNKD2PHkB5BjQAn1igXYZI
 hgWphEoTvBtVgGfOzNwt
 =0mak
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull misc driver fixes from Greg KH:
 "Here are a number of small char/misc/iio driver fixes for 6.12-rc4:

   - loads of small iio driver fixes for reported problems

   - parport driver out-of-bounds fix

   - Kconfig description and MAINTAINERS file updates

  All of these, except for the Kconfig and MAINTAINERS file updates have
  been in linux-next all week. Those other two are just documentation
  changes and will have no runtime issues and were merged on Friday"

* tag 'char-misc-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (39 commits)
  misc: rtsx: list supported models in Kconfig help
  MAINTAINERS: Remove some entries due to various compliance requirements.
  misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for OTP device
  misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for EEPROM device
  parport: Proper fix for array out-of-bounds access
  iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig
  iio: frequency: {admv4420,adrf6780}: format Kconfig entries
  iio: adc: ad4695: Add missing Kconfig select
  iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
  iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency()
  iioc: dac: ltc2664: Fix span variable usage in ltc2664_channel_config()
  iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig
  iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig
  iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig
  iio: amplifiers: ada4250: add missing select REGMAP_SPI in Kconfig
  iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig
  iio: resolver: ad2s1210: add missing select (TRIGGERED_)BUFFER in Kconfig
  iio: resolver: ad2s1210 add missing select REGMAP in Kconfig
  iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
  iio: pressure: bm1390: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
  ...
This commit is contained in:
Linus Torvalds 2024-10-20 13:10:44 -07:00
commit c55228220d
23 changed files with 116 additions and 266 deletions

View File

@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/iio/dac/adi,ad5686.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices AD5360 and similar DACs
title: Analog Devices AD5360 and similar SPI DACs
maintainers:
- Michael Hennerich <michael.hennerich@analog.com>
@ -12,8 +12,6 @@ maintainers:
properties:
compatible:
oneOf:
- description: SPI devices
enum:
- adi,ad5310r
- adi,ad5672r
@ -30,23 +28,6 @@ properties:
- adi,ad5685r
- adi,ad5686
- adi,ad5686r
- description: I2C devices
enum:
- adi,ad5311r
- adi,ad5337r
- adi,ad5338r
- adi,ad5671r
- adi,ad5675r
- adi,ad5691r
- adi,ad5692r
- adi,ad5693
- adi,ad5693r
- adi,ad5694
- adi,ad5694r
- adi,ad5695r
- adi,ad5696
- adi,ad5696r
reg:
maxItems: 1

View File

@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/iio/dac/adi,ad5696.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices AD5696 and similar multi-channel DACs
title: Analog Devices AD5696 and similar I2C multi-channel DACs
maintainers:
- Michael Auchter <michael.auchter@ni.com>
@ -16,6 +16,7 @@ properties:
compatible:
enum:
- adi,ad5311r
- adi,ad5337r
- adi,ad5338r
- adi,ad5671r
- adi,ad5675r

View File

@ -258,12 +258,6 @@ L: linux-acenic@sunsite.dk
S: Maintained
F: drivers/net/ethernet/alteon/acenic*
ACER ASPIRE 1 EMBEDDED CONTROLLER DRIVER
M: Nikita Travkin <nikita@trvn.ru>
S: Maintained
F: Documentation/devicetree/bindings/platform/acer,aspire1-ec.yaml
F: drivers/platform/arm64/acer-aspire1-ec.c
ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
M: Peter Kaestle <peter@piie.net>
L: platform-driver-x86@vger.kernel.org
@ -888,7 +882,6 @@ F: drivers/staging/media/sunxi/cedrus/
ALPHA PORT
M: Richard Henderson <richard.henderson@linaro.org>
M: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
M: Matt Turner <mattst88@gmail.com>
L: linux-alpha@vger.kernel.org
S: Odd Fixes
@ -2263,12 +2256,6 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-ep93xx/ts72xx.c
ARM/CIRRUS LOGIC CLPS711X ARM ARCHITECTURE
M: Alexander Shiyan <shc_work@mail.ru>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Odd Fixes
N: clps711x
ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
M: Hartley Sweeten <hsweeten@visionengravers.com>
M: Alexander Sverdlin <alexander.sverdlin@gmail.com>
@ -3815,14 +3802,6 @@ F: drivers/video/backlight/
F: include/linux/backlight.h
F: include/linux/pwm_backlight.h
BAIKAL-T1 PVT HARDWARE MONITOR DRIVER
M: Serge Semin <fancer.lancer@gmail.com>
L: linux-hwmon@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
F: Documentation/hwmon/bt1-pvt.rst
F: drivers/hwmon/bt1-pvt.[ch]
BARCO P50 GPIO DRIVER
M: Santosh Kumar Yadav <santoshkumar.yadav@barco.com>
M: Peter Korsgaard <peter.korsgaard@barco.com>
@ -6476,7 +6455,6 @@ F: drivers/mtd/nand/raw/denali*
DESIGNWARE EDMA CORE IP DRIVER
M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
R: Serge Semin <fancer.lancer@gmail.com>
L: dmaengine@vger.kernel.org
S: Maintained
F: drivers/dma/dw-edma/
@ -9759,14 +9737,6 @@ F: drivers/gpio/gpiolib-cdev.c
F: include/uapi/linux/gpio.h
F: tools/gpio/
GRE DEMULTIPLEXER DRIVER
M: Dmitry Kozlov <xeb@mail.ru>
L: netdev@vger.kernel.org
S: Maintained
F: include/net/gre.h
F: net/ipv4/gre_demux.c
F: net/ipv4/gre_offload.c
GRETH 10/100/1G Ethernet MAC device driver
M: Andreas Larsson <andreas@gaisler.com>
L: netdev@vger.kernel.org
@ -12959,12 +12929,6 @@ S: Maintained
F: drivers/ata/pata_arasan_cf.c
F: include/linux/pata_arasan_cf_data.h
LIBATA PATA DRIVERS
R: Sergey Shtylyov <s.shtylyov@omp.ru>
L: linux-ide@vger.kernel.org
F: drivers/ata/ata_*.c
F: drivers/ata/pata_*.c
LIBATA PATA FARADAY FTIDE010 AND GEMINI SATA BRIDGE DRIVERS
M: Linus Walleij <linus.walleij@linaro.org>
L: linux-ide@vger.kernel.org
@ -12981,14 +12945,6 @@ F: drivers/ata/ahci_platform.c
F: drivers/ata/libahci_platform.c
F: include/linux/ahci_platform.h
LIBATA SATA AHCI SYNOPSYS DWC CONTROLLER DRIVER
M: Serge Semin <fancer.lancer@gmail.com>
L: linux-ide@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml
F: Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
F: drivers/ata/ahci_dwc.c
LIBATA SATA PROMISE TX2/TX4 CONTROLLER DRIVER
M: Mikael Pettersson <mikpelinux@gmail.com>
L: linux-ide@vger.kernel.org
@ -14184,16 +14140,6 @@ S: Maintained
T: git git://linuxtv.org/media_tree.git
F: drivers/media/platform/nxp/imx-pxp.[ch]
MEDIA DRIVERS FOR ASCOT2E
M: Sergey Kozlov <serjk@netup.ru>
M: Abylay Ospan <aospan@netup.ru>
L: linux-media@vger.kernel.org
S: Supported
W: https://linuxtv.org
W: http://netup.tv/
T: git git://linuxtv.org/media_tree.git
F: drivers/media/dvb-frontends/ascot2e*
MEDIA DRIVERS FOR CXD2099AR CI CONTROLLERS
M: Jasmin Jessich <jasmin@anw.at>
L: linux-media@vger.kernel.org
@ -14202,16 +14148,6 @@ W: https://linuxtv.org
T: git git://linuxtv.org/media_tree.git
F: drivers/media/dvb-frontends/cxd2099*
MEDIA DRIVERS FOR CXD2841ER
M: Sergey Kozlov <serjk@netup.ru>
M: Abylay Ospan <aospan@netup.ru>
L: linux-media@vger.kernel.org
S: Supported
W: https://linuxtv.org
W: http://netup.tv/
T: git git://linuxtv.org/media_tree.git
F: drivers/media/dvb-frontends/cxd2841er*
MEDIA DRIVERS FOR CXD2880
M: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com>
L: linux-media@vger.kernel.org
@ -14256,35 +14192,6 @@ F: drivers/media/platform/nxp/imx-mipi-csis.c
F: drivers/media/platform/nxp/imx7-media-csi.c
F: drivers/media/platform/nxp/imx8mq-mipi-csi2.c
MEDIA DRIVERS FOR HELENE
M: Abylay Ospan <aospan@netup.ru>
L: linux-media@vger.kernel.org
S: Supported
W: https://linuxtv.org
W: http://netup.tv/
T: git git://linuxtv.org/media_tree.git
F: drivers/media/dvb-frontends/helene*
MEDIA DRIVERS FOR HORUS3A
M: Sergey Kozlov <serjk@netup.ru>
M: Abylay Ospan <aospan@netup.ru>
L: linux-media@vger.kernel.org
S: Supported
W: https://linuxtv.org
W: http://netup.tv/
T: git git://linuxtv.org/media_tree.git
F: drivers/media/dvb-frontends/horus3a*
MEDIA DRIVERS FOR LNBH25
M: Sergey Kozlov <serjk@netup.ru>
M: Abylay Ospan <aospan@netup.ru>
L: linux-media@vger.kernel.org
S: Supported
W: https://linuxtv.org
W: http://netup.tv/
T: git git://linuxtv.org/media_tree.git
F: drivers/media/dvb-frontends/lnbh25*
MEDIA DRIVERS FOR MXL5XX TUNER DEMODULATORS
L: linux-media@vger.kernel.org
S: Orphan
@ -14292,16 +14199,6 @@ W: https://linuxtv.org
T: git git://linuxtv.org/media_tree.git
F: drivers/media/dvb-frontends/mxl5xx*
MEDIA DRIVERS FOR NETUP PCI UNIVERSAL DVB devices
M: Sergey Kozlov <serjk@netup.ru>
M: Abylay Ospan <aospan@netup.ru>
L: linux-media@vger.kernel.org
S: Supported
W: https://linuxtv.org
W: http://netup.tv/
T: git git://linuxtv.org/media_tree.git
F: drivers/media/pci/netup_unidvb/*
MEDIA DRIVERS FOR NVIDIA TEGRA - VDE
M: Dmitry Osipenko <digetx@gmail.com>
L: linux-media@vger.kernel.org
@ -14945,13 +14842,6 @@ F: drivers/mtd/
F: include/linux/mtd/
F: include/uapi/mtd/
MEMSENSING MICROSYSTEMS MSA311 DRIVER
M: Dmitry Rokosov <ddrokosov@sberdevices.ru>
L: linux-iio@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml
F: drivers/iio/accel/msa311.c
MEN A21 WATCHDOG DRIVER
M: Johannes Thumshirn <morbidrsa@gmail.com>
L: linux-watchdog@vger.kernel.org
@ -15285,7 +15175,6 @@ F: drivers/tty/serial/8250/8250_pci1xxxx.c
MICROCHIP POLARFIRE FPGA DRIVERS
M: Conor Dooley <conor.dooley@microchip.com>
R: Vladimir Georgiev <v.georgiev@metrotek.ru>
L: linux-fpga@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml
@ -15540,17 +15429,6 @@ F: arch/mips/
F: drivers/platform/mips/
F: include/dt-bindings/mips/
MIPS BAIKAL-T1 PLATFORM
M: Serge Semin <fancer.lancer@gmail.com>
L: linux-mips@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/bus/baikal,bt1-*.yaml
F: Documentation/devicetree/bindings/clock/baikal,bt1-*.yaml
F: drivers/bus/bt1-*.c
F: drivers/clk/baikal-t1/
F: drivers/memory/bt1-l2-ctl.c
F: drivers/mtd/maps/physmap-bt1-rom.[ch]
MIPS BOSTON DEVELOPMENT BOARD
M: Paul Burton <paulburton@kernel.org>
L: linux-mips@vger.kernel.org
@ -15563,7 +15441,6 @@ F: include/dt-bindings/clock/boston-clock.h
MIPS CORE DRIVERS
M: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
M: Serge Semin <fancer.lancer@gmail.com>
L: linux-mips@vger.kernel.org
S: Supported
F: drivers/bus/mips_cdmm.c
@ -16531,12 +16408,6 @@ F: include/linux/ntb.h
F: include/linux/ntb_transport.h
F: tools/testing/selftests/ntb/
NTB IDT DRIVER
M: Serge Semin <fancer.lancer@gmail.com>
L: ntb@lists.linux.dev
S: Supported
F: drivers/ntb/hw/idt/
NTB INTEL DRIVER
M: Dave Jiang <dave.jiang@intel.com>
L: ntb@lists.linux.dev
@ -18557,13 +18428,6 @@ F: drivers/pps/
F: include/linux/pps*.h
F: include/uapi/linux/pps.h
PPTP DRIVER
M: Dmitry Kozlov <xeb@mail.ru>
L: netdev@vger.kernel.org
S: Maintained
W: http://sourceforge.net/projects/accel-pptp
F: drivers/net/ppp/pptp.c
PRESSURE STALL INFORMATION (PSI)
M: Johannes Weiner <hannes@cmpxchg.org>
M: Suren Baghdasaryan <surenb@google.com>
@ -19654,15 +19518,6 @@ S: Supported
F: Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml
F: drivers/i2c/busses/i2c-emev2.c
RENESAS ETHERNET AVB DRIVER
R: Sergey Shtylyov <s.shtylyov@omp.ru>
L: netdev@vger.kernel.org
L: linux-renesas-soc@vger.kernel.org
F: Documentation/devicetree/bindings/net/renesas,etheravb.yaml
F: drivers/net/ethernet/renesas/Kconfig
F: drivers/net/ethernet/renesas/Makefile
F: drivers/net/ethernet/renesas/ravb*
RENESAS ETHERNET SWITCH DRIVER
R: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
L: netdev@vger.kernel.org
@ -19712,14 +19567,6 @@ F: Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml
F: drivers/i2c/busses/i2c-rcar.c
F: drivers/i2c/busses/i2c-sh_mobile.c
RENESAS R-CAR SATA DRIVER
R: Sergey Shtylyov <s.shtylyov@omp.ru>
L: linux-ide@vger.kernel.org
L: linux-renesas-soc@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
F: drivers/ata/sata_rcar.c
RENESAS R-CAR THERMAL DRIVERS
M: Niklas Söderlund <niklas.soderlund@ragnatech.se>
L: linux-renesas-soc@vger.kernel.org
@ -19795,16 +19642,6 @@ S: Supported
F: Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
F: drivers/i2c/busses/i2c-rzv2m.c
RENESAS SUPERH ETHERNET DRIVER
R: Sergey Shtylyov <s.shtylyov@omp.ru>
L: netdev@vger.kernel.org
L: linux-renesas-soc@vger.kernel.org
F: Documentation/devicetree/bindings/net/renesas,ether.yaml
F: drivers/net/ethernet/renesas/Kconfig
F: drivers/net/ethernet/renesas/Makefile
F: drivers/net/ethernet/renesas/sh_eth*
F: include/linux/sh_eth.h
RENESAS USB PHY DRIVER
M: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
L: linux-renesas-soc@vger.kernel.org
@ -22458,19 +22295,11 @@ F: drivers/tty/serial/8250/8250_lpss.c
SYNOPSYS DESIGNWARE APB GPIO DRIVER
M: Hoan Tran <hoan@os.amperecomputing.com>
M: Serge Semin <fancer.lancer@gmail.com>
L: linux-gpio@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
F: drivers/gpio/gpio-dwapb.c
SYNOPSYS DESIGNWARE APB SSI DRIVER
M: Serge Semin <fancer.lancer@gmail.com>
L: linux-spi@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
F: drivers/spi/spi-dw*
SYNOPSYS DESIGNWARE AXI DMAC DRIVER
M: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
S: Maintained
@ -23780,12 +23609,6 @@ L: linux-input@vger.kernel.org
S: Maintained
F: drivers/hid/hid-udraw-ps3.c
UFS FILESYSTEM
M: Evgeniy Dushistov <dushistov@mail.ru>
S: Maintained
F: Documentation/admin-guide/ufs.rst
F: fs/ufs/
UHID USERSPACE HID IO DRIVER
M: David Rheinsberg <david@readahead.eu>
L: linux-input@vger.kernel.org

View File

@ -447,6 +447,8 @@ config IIO_ST_ACCEL_SPI_3AXIS
config IIO_KX022A
tristate
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
config IIO_KX022A_SPI
tristate "Kionix KX022A tri-axis digital accelerometer SPI interface"

View File

@ -1218,7 +1218,8 @@ static int bma400_activity_event_en(struct bma400_data *data,
static int bma400_tap_event_en(struct bma400_data *data,
enum iio_event_direction dir, int state)
{
unsigned int mask, field_value;
unsigned int mask;
unsigned int field_value = 0;
int ret;
/*

View File

@ -52,6 +52,8 @@ config AD4695
tristate "Analog Device AD4695 ADC Driver"
depends on SPI
select REGMAP_SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Analog Devices AD4695 and similar
analog to digital converters (ADC).
@ -328,6 +330,8 @@ config AD7923
config AD7944
tristate "Analog Devices AD7944 and similar ADCs driver"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Analog Devices
AD7944, AD7985, AD7986 ADCs.
@ -1481,6 +1485,8 @@ config TI_ADS8344
config TI_ADS8688
tristate "Texas Instruments ADS8688"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
If you say yes here you get support for Texas Instruments ADS8684 and
and ADS8688 ADC chips
@ -1491,6 +1497,8 @@ config TI_ADS8688
config TI_ADS124S08
tristate "Texas Instruments ADS124S08"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
If you say yes here you get support for Texas Instruments ADS124S08
and ADS124S06 ADC chips
@ -1525,6 +1533,9 @@ config TI_AM335X_ADC
config TI_LMP92064
tristate "Texas Instruments LMP92064 ADC driver"
depends on SPI
select REGMAP_SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for the LMP92064 Precision Current and Voltage
sensor.

View File

@ -27,6 +27,7 @@ config AD8366
config ADA4250
tristate "Analog Devices ADA4250 Instrumentation Amplifier"
depends on SPI
select REGMAP_SPI
help
Say yes here to build support for Analog Devices ADA4250
SPI Amplifier's support. The driver provides direct access via

View File

@ -80,6 +80,8 @@ config ENS160
tristate "ScioSense ENS160 sensor driver"
depends on (I2C || SPI)
select REGMAP
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select ENS160_I2C if I2C
select ENS160_SPI if SPI
help

View File

@ -32,7 +32,7 @@ static ssize_t _hid_sensor_set_report_latency(struct device *dev,
latency = integer * 1000 + fract / 1000;
ret = hid_sensor_set_report_latency(attrb, latency);
if (ret < 0)
return len;
return ret;
attrb->latency_ms = hid_sensor_get_report_latency(attrb);

View File

@ -9,6 +9,8 @@ menu "Digital to analog converters"
config AD3552R
tristate "Analog Devices AD3552R DAC driver"
depends on SPI_MASTER
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Analog Devices AD3552R
Digital to Analog Converter.
@ -252,6 +254,8 @@ config AD5764
config AD5766
tristate "Analog Devices AD5766/AD5767 DAC driver"
depends on SPI_MASTER
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Analog Devices AD5766, AD5767
Digital to Analog Converter.
@ -262,6 +266,7 @@ config AD5766
config AD5770R
tristate "Analog Devices AD5770R IDAC driver"
depends on SPI_MASTER
select REGMAP_SPI
help
Say yes here to build support for Analog Devices AD5770R Digital to
Analog Converter.
@ -353,6 +358,7 @@ config LPC18XX_DAC
config LTC1660
tristate "Linear Technology LTC1660/LTC1665 DAC SPI driver"
depends on SPI
select REGMAP_SPI
help
Say yes here to build support for Linear Technology
LTC1660 and LTC1665 Digital to Analog Converters.
@ -483,6 +489,7 @@ config STM32_DAC
config STM32_DAC_CORE
tristate
select REGMAP_MMIO
config TI_DAC082S085
tristate "Texas Instruments 8/10/12-bit 2/4-channel DAC driver"

View File

@ -516,7 +516,7 @@ static int ltc2664_channel_config(struct ltc2664_state *st)
const struct ltc2664_chip_info *chip_info = st->chip_info;
struct device *dev = &st->spi->dev;
u32 reg, tmp[2], mspan;
int ret, span = 0;
int ret;
mspan = LTC2664_MSPAN_SOFTSPAN;
ret = device_property_read_u32(dev, "adi,manual-span-operation-config",
@ -579,20 +579,21 @@ static int ltc2664_channel_config(struct ltc2664_state *st)
ret = fwnode_property_read_u32_array(child, "output-range-microvolt",
tmp, ARRAY_SIZE(tmp));
if (!ret && mspan == LTC2664_MSPAN_SOFTSPAN) {
chan->span = ltc2664_set_span(st, tmp[0] / 1000,
tmp[1] / 1000, reg);
if (span < 0)
return dev_err_probe(dev, span,
ret = ltc2664_set_span(st, tmp[0] / 1000, tmp[1] / 1000, reg);
if (ret < 0)
return dev_err_probe(dev, ret,
"Failed to set span\n");
chan->span = ret;
}
ret = fwnode_property_read_u32_array(child, "output-range-microamp",
tmp, ARRAY_SIZE(tmp));
if (!ret) {
chan->span = ltc2664_set_span(st, 0, tmp[1] / 1000, reg);
if (span < 0)
return dev_err_probe(dev, span,
ret = ltc2664_set_span(st, 0, tmp[1] / 1000, reg);
if (ret < 0)
return dev_err_probe(dev, ret,
"Failed to set span\n");
chan->span = ret;
}
}

View File

@ -53,6 +53,7 @@ config ADF4371
config ADF4377
tristate "Analog Devices ADF4377 Microwave Wideband Synthesizer"
depends on SPI && COMMON_CLK
select REGMAP_SPI
help
Say yes here to build support for Analog Devices ADF4377 Microwave
Wideband Synthesizer.
@ -93,6 +94,7 @@ config ADMV1014
config ADMV4420
tristate "Analog Devices ADMV4420 K Band Downconverter"
depends on SPI
select REGMAP_SPI
help
Say yes here to build support for Analog Devices K Band
Downconverter with integrated Fractional-N PLL and VCO.

View File

@ -2172,7 +2172,6 @@ int bmi323_core_probe(struct device *dev)
}
EXPORT_SYMBOL_NS_GPL(bmi323_core_probe, IIO_BMI323);
#if defined(CONFIG_PM)
static int bmi323_core_runtime_suspend(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
@ -2199,12 +2198,12 @@ static int bmi323_core_runtime_suspend(struct device *dev)
}
for (unsigned int i = 0; i < ARRAY_SIZE(bmi323_ext_reg_savestate); i++) {
ret = bmi323_read_ext_reg(data, bmi323_reg_savestate[i],
&savestate->reg_settings[i]);
ret = bmi323_read_ext_reg(data, bmi323_ext_reg_savestate[i],
&savestate->ext_reg_settings[i]);
if (ret) {
dev_err(data->dev,
"Error reading bmi323 external reg 0x%x: %d\n",
bmi323_reg_savestate[i], ret);
bmi323_ext_reg_savestate[i], ret);
return ret;
}
}
@ -2232,8 +2231,10 @@ static int bmi323_core_runtime_resume(struct device *dev)
* after being reset in the lower power state by runtime-pm.
*/
ret = bmi323_init(data);
if (!ret)
if (ret) {
dev_err(data->dev, "Device power-on and init failed: %d", ret);
return ret;
}
/* Register must be cleared before changing an active config */
ret = regmap_write(data->regmap, BMI323_FEAT_IO0_REG, 0);
@ -2243,12 +2244,12 @@ static int bmi323_core_runtime_resume(struct device *dev)
}
for (unsigned int i = 0; i < ARRAY_SIZE(bmi323_ext_reg_savestate); i++) {
ret = bmi323_write_ext_reg(data, bmi323_reg_savestate[i],
savestate->reg_settings[i]);
ret = bmi323_write_ext_reg(data, bmi323_ext_reg_savestate[i],
savestate->ext_reg_settings[i]);
if (ret) {
dev_err(data->dev,
"Error writing bmi323 external reg 0x%x: %d\n",
bmi323_reg_savestate[i], ret);
bmi323_ext_reg_savestate[i], ret);
return ret;
}
}
@ -2293,10 +2294,8 @@ static int bmi323_core_runtime_resume(struct device *dev)
return iio_device_resume_triggering(indio_dev);
}
#endif
const struct dev_pm_ops bmi323_core_pm_ops = {
SET_RUNTIME_PM_OPS(bmi323_core_runtime_suspend,
RUNTIME_PM_OPS(bmi323_core_runtime_suspend,
bmi323_core_runtime_resume, NULL)
};
EXPORT_SYMBOL_NS_GPL(bmi323_core_pm_ops, IIO_BMI323);

View File

@ -335,6 +335,8 @@ config ROHM_BU27008
depends on I2C
select REGMAP_I2C
select IIO_GTS_HELPER
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Enable support for the ROHM BU27008 color sensor.
The ROHM BU27008 is a sensor with 5 photodiodes (red, green,

View File

@ -138,6 +138,10 @@ static const struct opt3001_scale opt3001_scales[] = {
.val = 20966,
.val2 = 400000,
},
{
.val = 41932,
.val2 = 800000,
},
{
.val = 83865,
.val2 = 600000,

View File

@ -99,9 +99,8 @@ static const char * const period_values[] = {
static ssize_t in_illuminance_period_available_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct veml6030_data *data = iio_priv(dev_to_iio_dev(dev));
int ret, reg, x;
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
struct veml6030_data *data = iio_priv(indio_dev);
ret = regmap_read(data->regmap, VEML6030_REG_ALS_CONF, &reg);
if (ret) {
@ -780,7 +779,7 @@ static int veml6030_hw_init(struct iio_dev *indio_dev)
/* Cache currently active measurement parameters */
data->cur_gain = 3;
data->cur_resolution = 4608;
data->cur_resolution = 5376;
data->cur_integration_time = 3;
return ret;

View File

@ -11,6 +11,8 @@ config AF8133J
depends on I2C
depends on OF
select REGMAP_I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Voltafield AF8133J I2C-based
3-axis magnetometer chip.

View File

@ -19,6 +19,9 @@ config ABP060MG
config ROHM_BM1390
tristate "ROHM BM1390GLV-Z pressure sensor driver"
depends on I2C
select REGMAP_I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Support for the ROHM BM1390 pressure sensor. The BM1390GLV-Z
can measure pressures ranging from 300 hPa to 1300 hPa with
@ -253,6 +256,7 @@ config MS5637
config SDP500
tristate "Sensirion SDP500 differential pressure sensor I2C driver"
depends on I2C
select CRC8
help
Say Y here to build support for Sensirion SDP500 differential pressure
sensor I2C driver.

View File

@ -86,6 +86,8 @@ config LIDAR_LITE_V2
config MB1232
tristate "MaxSonar I2CXL family ultrasonic sensors"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say Y to build a driver for the ultrasonic sensors I2CXL of
MaxBotix which have an i2c interface. It can be used to measure

View File

@ -31,6 +31,9 @@ config AD2S1210
depends on SPI
depends on COMMON_CLK
depends on GPIOLIB || COMPILE_TEST
select REGMAP
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Analog Devices spi resolver
to digital converters, ad2s1210, provides direct access via sysfs.

View File

@ -16,7 +16,8 @@ config MISC_RTSX_PCI
select MFD_CORE
help
This supports for Realtek PCI-Express card reader including rts5209,
rts5227, rts522A, rts5229, rts5249, rts524A, rts525A, rtl8411, rts5260.
rts5227, rts5228, rts522A, rts5229, rts5249, rts524A, rts525A, rtl8411,
rts5260, rts5261, rts5264.
Realtek card readers support access to many types of memory cards,
such as Memory Stick, Memory Stick Pro, Secure Digital and
MultiMediaCard.

View File

@ -364,6 +364,7 @@ static int pci1xxxx_otp_eeprom_probe(struct auxiliary_device *aux_dev,
if (is_eeprom_responsive(priv)) {
priv->nvmem_config_eeprom.type = NVMEM_TYPE_EEPROM;
priv->nvmem_config_eeprom.name = EEPROM_NAME;
priv->nvmem_config_eeprom.id = NVMEM_DEVID_AUTO;
priv->nvmem_config_eeprom.dev = &aux_dev->dev;
priv->nvmem_config_eeprom.owner = THIS_MODULE;
priv->nvmem_config_eeprom.reg_read = pci1xxxx_eeprom_read;
@ -383,6 +384,7 @@ static int pci1xxxx_otp_eeprom_probe(struct auxiliary_device *aux_dev,
priv->nvmem_config_otp.type = NVMEM_TYPE_OTP;
priv->nvmem_config_otp.name = OTP_NAME;
priv->nvmem_config_otp.id = NVMEM_DEVID_AUTO;
priv->nvmem_config_otp.dev = &aux_dev->dev;
priv->nvmem_config_otp.owner = THIS_MODULE;
priv->nvmem_config_otp.reg_read = pci1xxxx_otp_read;

View File

@ -51,12 +51,12 @@ static int do_active_device(const struct ctl_table *table, int write,
for (dev = port->devices; dev ; dev = dev->next) {
if(dev == port->cad) {
len += snprintf(buffer, sizeof(buffer), "%s\n", dev->name);
len += scnprintf(buffer, sizeof(buffer), "%s\n", dev->name);
}
}
if(!len) {
len += snprintf(buffer, sizeof(buffer), "%s\n", "none");
len += scnprintf(buffer, sizeof(buffer), "%s\n", "none");
}
if (len > *lenp)
@ -87,19 +87,19 @@ static int do_autoprobe(const struct ctl_table *table, int write,
}
if ((str = info->class_name) != NULL)
len += snprintf (buffer + len, sizeof(buffer) - len, "CLASS:%s;\n", str);
len += scnprintf (buffer + len, sizeof(buffer) - len, "CLASS:%s;\n", str);
if ((str = info->model) != NULL)
len += snprintf (buffer + len, sizeof(buffer) - len, "MODEL:%s;\n", str);
len += scnprintf (buffer + len, sizeof(buffer) - len, "MODEL:%s;\n", str);
if ((str = info->mfr) != NULL)
len += snprintf (buffer + len, sizeof(buffer) - len, "MANUFACTURER:%s;\n", str);
len += scnprintf (buffer + len, sizeof(buffer) - len, "MANUFACTURER:%s;\n", str);
if ((str = info->description) != NULL)
len += snprintf (buffer + len, sizeof(buffer) - len, "DESCRIPTION:%s;\n", str);
len += scnprintf (buffer + len, sizeof(buffer) - len, "DESCRIPTION:%s;\n", str);
if ((str = info->cmdset) != NULL)
len += snprintf (buffer + len, sizeof(buffer) - len, "COMMAND SET:%s;\n", str);
len += scnprintf (buffer + len, sizeof(buffer) - len, "COMMAND SET:%s;\n", str);
if (len > *lenp)
len = *lenp;
@ -128,7 +128,7 @@ static int do_hardware_base_addr(const struct ctl_table *table, int write,
if (write) /* permissions prevent this anyway */
return -EACCES;
len += snprintf (buffer, sizeof(buffer), "%lu\t%lu\n", port->base, port->base_hi);
len += scnprintf (buffer, sizeof(buffer), "%lu\t%lu\n", port->base, port->base_hi);
if (len > *lenp)
len = *lenp;
@ -155,7 +155,7 @@ static int do_hardware_irq(const struct ctl_table *table, int write,
if (write) /* permissions prevent this anyway */
return -EACCES;
len += snprintf (buffer, sizeof(buffer), "%d\n", port->irq);
len += scnprintf (buffer, sizeof(buffer), "%d\n", port->irq);
if (len > *lenp)
len = *lenp;
@ -182,7 +182,7 @@ static int do_hardware_dma(const struct ctl_table *table, int write,
if (write) /* permissions prevent this anyway */
return -EACCES;
len += snprintf (buffer, sizeof(buffer), "%d\n", port->dma);
len += scnprintf (buffer, sizeof(buffer), "%d\n", port->dma);
if (len > *lenp)
len = *lenp;
@ -213,7 +213,7 @@ static int do_hardware_modes(const struct ctl_table *table, int write,
#define printmode(x) \
do { \
if (port->modes & PARPORT_MODE_##x) \
len += snprintf(buffer + len, sizeof(buffer) - len, "%s%s", f++ ? "," : "", #x); \
len += scnprintf(buffer + len, sizeof(buffer) - len, "%s%s", f++ ? "," : "", #x); \
} while (0)
int f = 0;
printmode(PCSPP);