Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-11 13:41:55 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Browse Source
This commit is contained in:
Paul Mundt 2009-09-25 12:15:15 +09:00
commit c373ba9991
623 changed files with 29937 additions and 12894 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

145
Documentation/arm/tcm.txt Normal file
View File

@ -0,0 +1,145 @@
ARM TCM (Tightly-Coupled Memory) handling in Linux
----
Written by Linus Walleij <linus.walleij@stericsson.com>
Some ARM SoC:s have a so-called TCM (Tightly-Coupled Memory).
This is usually just a few (4-64) KiB of RAM inside the ARM
processor.
Due to being embedded inside the CPU The TCM has a
Harvard-architecture, so there is an ITCM (instruction TCM)
and a DTCM (data TCM). The DTCM can not contain any
instructions, but the ITCM can actually contain data.
The size of DTCM or ITCM is minimum 4KiB so the typical
minimum configuration is 4KiB ITCM and 4KiB DTCM.
ARM CPU:s have special registers to read out status, physical
location and size of TCM memories. arch/arm/include/asm/cputype.h
defines a CPUID_TCM register that you can read out from the
system control coprocessor. Documentation from ARM can be found
at http://infocenter.arm.com, search for "TCM Status Register"
to see documents for all CPUs. Reading this register you can
determine if ITCM (bit 0) and/or DTCM (bit 16) is present in the
machine.
There is further a TCM region register (search for "TCM Region
Registers" at the ARM site) that can report and modify the location
size of TCM memories at runtime. This is used to read out and modify
TCM location and size. Notice that this is not a MMU table: you
actually move the physical location of the TCM around. At the
place you put it, it will mask any underlying RAM from the
CPU so it is usually wise not to overlap any physical RAM with
the TCM. The TCM memory exists totally outside the MMU and will
override any MMU mappings.
Code executing inside the ITCM does not "see" any MMU mappings
and e.g. register accesses must be made to physical addresses.
TCM is used for a few things:
- FIQ and other interrupt handlers that need deterministic
timing and cannot wait for cache misses.
- Idle loops where all external RAM is set to self-refresh
retention mode, so only on-chip RAM is accessible by
the CPU and then we hang inside ITCM waiting for an
interrupt.
- Other operations which implies shutting off or reconfiguring
the external RAM controller.
There is an interface for using TCM on the ARM architecture
in <asm/tcm.h>. Using this interface it is possible to:
- Define the physical address and size of ITCM and DTCM.
- Tag functions to be compiled into ITCM.
- Tag data and constants to be allocated to DTCM and ITCM.
- Have the remaining TCM RAM added to a special
allocation pool with gen_pool_create() and gen_pool_add()
and provice tcm_alloc() and tcm_free() for this
memory. Such a heap is great for things like saving
device state when shutting off device power domains.
A machine that has TCM memory shall select HAVE_TCM in
arch/arm/Kconfig for itself, and then the
rest of the functionality will depend on the physical
location and size of ITCM and DTCM to be defined in
mach/memory.h for the machine. Code that needs to use
TCM shall #include <asm/tcm.h> If the TCM is not located
at the place given in memory.h it will be moved using
the TCM Region registers.
Functions to go into itcm can be tagged like this:
int __tcmfunc foo(int bar);
Variables to go into dtcm can be tagged like this:
int __tcmdata foo;
Constants can be tagged like this:
int __tcmconst foo;
To put assembler into TCM just use
.section ".tcm.text" or .section ".tcm.data"
respectively.
Example code:
#include <asm/tcm.h>
/* Uninitialized data */
static u32 __tcmdata tcmvar;
/* Initialized data */
static u32 __tcmdata tcmassigned = 0x2BADBABEU;
/* Constant */
static const u32 __tcmconst tcmconst = 0xCAFEBABEU;
static void __tcmlocalfunc tcm_to_tcm(void)
{
int i;
for (i = 0; i < 100; i++)
tcmvar ++;
}
static void __tcmfunc hello_tcm(void)
{
/* Some abstract code that runs in ITCM */
int i;
for (i = 0; i < 100; i++) {
tcmvar ++;
}
tcm_to_tcm();
}
static void __init test_tcm(void)
{
u32 *tcmem;
int i;
hello_tcm();
printk("Hello TCM executed from ITCM RAM\n");
printk("TCM variable from testrun: %u @ %p\n", tcmvar, &tcmvar);
tcmvar = 0xDEADBEEFU;
printk("TCM variable: 0x%x @ %p\n", tcmvar, &tcmvar);
printk("TCM assigned variable: 0x%x @ %p\n", tcmassigned, &tcmassigned);
printk("TCM constant: 0x%x @ %p\n", tcmconst, &tcmconst);
/* Allocate some TCM memory from the pool */
tcmem = tcm_alloc(20);
if (tcmem) {
printk("TCM Allocated 20 bytes of TCM @ %p\n", tcmem);
tcmem[0] = 0xDEADBEEFU;
tcmem[1] = 0x2BADBABEU;
tcmem[2] = 0xCAFEBABEU;
tcmem[3] = 0xDEADBEEFU;
tcmem[4] = 0x2BADBABEU;
for (i = 0; i < 5; i++)
printk("TCM tcmem[%d] = %08x\n", i, tcmem[i]);
tcm_free(tcmem, 20);
}
}

1
Documentation/auxdisplay/cfag12864b-example.c
View File

@ -194,7 +194,6 @@ static void cfag12864b_blit(void)
*/
#include <stdio.h>
#include <string.h>
#define EXAMPLES 6

32
Documentation/cgroups/cgroups.txt
View File

@ -408,6 +408,26 @@ You can attach the current shell task by echoing 0:
# echo 0 > tasks
2.3 Mounting hierarchies by name
--------------------------------
Passing the name=<x> option when mounting a cgroups hierarchy
associates the given name with the hierarchy. This can be used when
mounting a pre-existing hierarchy, in order to refer to it by name
rather than by its set of active subsystems. Each hierarchy is either
nameless, or has a unique name.
The name should match [\w.-]+
When passing a name=<x> option for a new hierarchy, you need to
specify subsystems manually; the legacy behaviour of mounting all
subsystems when none are explicitly specified is not supported when
you give a subsystem a name.
The name of the subsystem appears as part of the hierarchy description
in /proc/mounts and /proc/<pid>/cgroups.
3. Kernel API
=============
@ -501,7 +521,7 @@ rmdir() will fail with it. From this behavior, pre_destroy() can be
called multiple times against a cgroup.
int can_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
struct task_struct *task)
struct task_struct *task, bool threadgroup)
(cgroup_mutex held by caller)
Called prior to moving a task into a cgroup; if the subsystem
@ -509,14 +529,20 @@ returns an error, this will abort the attach operation. If a NULL
task is passed, then a successful result indicates that *any*
unspecified task can be moved into the cgroup. Note that this isn't
called on a fork. If this method returns 0 (success) then this should
remain valid while the caller holds cgroup_mutex.
remain valid while the caller holds cgroup_mutex. If threadgroup is
true, then a successful result indicates that all threads in the given
thread's threadgroup can be moved together.
void attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
struct cgroup *old_cgrp, struct task_struct *task)
struct cgroup *old_cgrp, struct task_struct *task,
bool threadgroup)
(cgroup_mutex held by caller)
Called after the task has been attached to the cgroup, to allow any
post-attachment activity that requires memory allocations or blocking.
If threadgroup is true, the subsystem should take care of all threads
in the specified thread's threadgroup. Currently does not support any
subsystem that might need the old_cgrp for every thread in the group.
void fork(struct cgroup_subsy *ss, struct task_struct *task)

41
Documentation/cgroups/memory.txt
View File

@ -179,6 +179,9 @@ The reclaim algorithm has not been modified for cgroups, except that
pages that are selected for reclaiming come from the per cgroup LRU
list.
NOTE: Reclaim does not work for the root cgroup, since we cannot set any
limits on the root cgroup.
2. Locking
The memory controller uses the following hierarchy
@ -210,6 +213,7 @@ We can alter the memory limit:
NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
mega or gigabytes.
NOTE: We can write "-1" to reset the *.limit_in_bytes(unlimited).
NOTE: We cannot set limits on the root cgroup any more.
# cat /cgroups/0/memory.limit_in_bytes
4194304
@ -375,7 +379,42 @@ cgroups created below it.
NOTE2: This feature can be enabled/disabled per subtree.
7. TODO
7. Soft limits
Soft limits allow for greater sharing of memory. The idea behind soft limits
is to allow control groups to use as much of the memory as needed, provided
a. There is no memory contention
b. They do not exceed their hard limit
When the system detects memory contention or low memory control groups
are pushed back to their soft limits. If the soft limit of each control
group is very high, they are pushed back as much as possible to make
sure that one control group does not starve the others of memory.
Please note that soft limits is a best effort feature, it comes with
no guarantees, but it does its best to make sure that when memory is
heavily contended for, memory is allocated based on the soft limit
hints/setup. Currently soft limit based reclaim is setup such that
it gets invoked from balance_pgdat (kswapd).
7.1 Interface
Soft limits can be setup by using the following commands (in this example we
assume a soft limit of 256 megabytes)
# echo 256M > memory.soft_limit_in_bytes
If we want to change this to 1G, we can at any time use
# echo 1G > memory.soft_limit_in_bytes
NOTE1: Soft limits take effect over a long period of time, since they involve
reclaiming memory for balancing between memory cgroups
NOTE2: It is recommended to set the soft limit always below the hard limit,
otherwise the hard limit will take precedence.
8. TODO
1. Add support for accounting huge pages (as a separate controller)
2. Make per-cgroup scanner reclaim not-shared pages first

75
Documentation/crypto/async-tx-api.txt
View File

@ -54,20 +54,23 @@ features surfaced as a result:
3.1 General format of the API:
struct dma_async_tx_descriptor *
async_<operation>(<op specific parameters>,
enum async_tx_flags flags,
struct dma_async_tx_descriptor *dependency,
dma_async_tx_callback callback_routine,
void *callback_parameter);
async_<operation>(<op specific parameters>, struct async_submit ctl *submit)
3.2 Supported operations:
memcpy - memory copy between a source and a destination buffer
memset - fill a destination buffer with a byte value
xor - xor a series of source buffers and write the result to a
destination buffer
xor_zero_sum - xor a series of source buffers and set a flag if the
result is zero. The implementation attempts to prevent
writes to memory
memcpy - memory copy between a source and a destination buffer
memset - fill a destination buffer with a byte value
xor - xor a series of source buffers and write the result to a
destination buffer
xor_val - xor a series of source buffers and set a flag if the
result is zero. The implementation attempts to prevent
writes to memory
pq - generate the p+q (raid6 syndrome) from a series of source buffers
pq_val - validate that a p and or q buffer are in sync with a given series of
sources
datap - (raid6_datap_recov) recover a raid6 data block and the p block
from the given sources
2data - (raid6_2data_recov) recover 2 raid6 data blocks from the given
sources
3.3 Descriptor management:
The return value is non-NULL and points to a 'descriptor' when the operation
@ -80,8 +83,8 @@ acknowledged by the application before the offload engine driver is allowed to
recycle (or free) the descriptor. A descriptor can be acked by one of the
following methods:
1/ setting the ASYNC_TX_ACK flag if no child operations are to be submitted
2/ setting the ASYNC_TX_DEP_ACK flag to acknowledge the parent
descriptor of a new operation.
2/ submitting an unacknowledged descriptor as a dependency to another
async_tx call will implicitly set the acknowledged state.
3/ calling async_tx_ack() on the descriptor.
3.4 When does the operation execute?
@ -119,30 +122,42 @@ of an operation.
Perform a xor->copy->xor operation where each operation depends on the
result from the previous operation:
void complete_xor_copy_xor(void *param)
void callback(void *param)
{
printk("complete\n");
struct completion *cmp = param;
complete(cmp);
}
int run_xor_copy_xor(struct page **xor_srcs,
int xor_src_cnt,
struct page *xor_dest,
size_t xor_len,
struct page *copy_src,
struct page *copy_dest,
size_t copy_len)
void run_xor_copy_xor(struct page **xor_srcs,
int xor_src_cnt,
struct page *xor_dest,
size_t xor_len,
struct page *copy_src,
struct page *copy_dest,
size_t copy_len)
{
struct dma_async_tx_descriptor *tx;
addr_conv_t addr_conv[xor_src_cnt];
struct async_submit_ctl submit;
addr_conv_t addr_conv[NDISKS];
struct completion cmp;
tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len,
ASYNC_TX_XOR_DROP_DST, NULL, NULL, NULL);
tx = async_memcpy(copy_dest, copy_src, 0, 0, copy_len,
ASYNC_TX_DEP_ACK, tx, NULL, NULL);
tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len,
ASYNC_TX_XOR_DROP_DST | ASYNC_TX_DEP_ACK | ASYNC_TX_ACK,
tx, complete_xor_copy_xor, NULL);
init_async_submit(&submit, ASYNC_TX_XOR_DROP_DST, NULL, NULL, NULL,
addr_conv);
tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len, &submit)
submit->depend_tx = tx;
tx = async_memcpy(copy_dest, copy_src, 0, 0, copy_len, &submit);
init_completion(&cmp);
init_async_submit(&submit, ASYNC_TX_XOR_DROP_DST | ASYNC_TX_ACK, tx,
callback, &cmp, addr_conv);
tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len, &submit);
async_tx_issue_pending_all();
wait_for_completion(&cmp);
}
See include/linux/async_tx.h for more information on the flags. See the

220
Documentation/filesystems/sharedsubtree.txt
View File

@ -4,7 +4,7 @@ Shared Subtrees
Contents:
1) Overview
2) Features
3) smount command
3) Setting mount states
4) Use-case
5) Detailed semantics
6) Quiz
@ -41,14 +41,14 @@ replicas continue to be exactly same.
Here is an example:
Lets say /mnt has a mount that is shared.
Let's say /mnt has a mount that is shared.
mount --make-shared /mnt
note: mount command does not yet support the --make-shared flag.
I have included a small C program which does the same by executing
'smount /mnt shared'
Note: mount(8) command now supports the --make-shared flag,
so the sample 'smount' program is no longer needed and has been
removed.
#mount --bind /mnt /tmp
# mount --bind /mnt /tmp
The above command replicates the mount at /mnt to the mountpoint /tmp
and the contents of both the mounts remain identical.
@ -58,8 +58,8 @@ replicas continue to be exactly same.
#ls /tmp
a b c
Now lets say we mount a device at /tmp/a
#mount /dev/sd0 /tmp/a
Now let's say we mount a device at /tmp/a
# mount /dev/sd0 /tmp/a
#ls /tmp/a
t1 t2 t2
@ -80,21 +80,20 @@ replicas continue to be exactly same.
Here is an example:
Lets say /mnt has a mount which is shared.
#mount --make-shared /mnt
Let's say /mnt has a mount which is shared.
# mount --make-shared /mnt
Lets bind mount /mnt to /tmp
#mount --bind /mnt /tmp
Let's bind mount /mnt to /tmp
# mount --bind /mnt /tmp
the new mount at /tmp becomes a shared mount and it is a replica of
the mount at /mnt.
Now lets make the mount at /tmp; a slave of /mnt
#mount --make-slave /tmp
[or smount /tmp slave]
Now let's make the mount at /tmp; a slave of /mnt
# mount --make-slave /tmp
lets mount /dev/sd0 on /mnt/a
#mount /dev/sd0 /mnt/a
let's mount /dev/sd0 on /mnt/a
# mount /dev/sd0 /mnt/a
#ls /mnt/a
t1 t2 t3
@ -104,9 +103,9 @@ replicas continue to be exactly same.
Note the mount event has propagated to the mount at /tmp
However lets see what happens if we mount something on the mount at /tmp
However let's see what happens if we mount something on the mount at /tmp
#mount /dev/sd1 /tmp/b
# mount /dev/sd1 /tmp/b
#ls /tmp/b
s1 s2 s3
@ -124,12 +123,11 @@ replicas continue to be exactly same.
2d) A unbindable mount is a unbindable private mount
lets say we have a mount at /mnt and we make is unbindable
let's say we have a mount at /mnt and we make is unbindable
#mount --make-unbindable /mnt
[ smount /mnt unbindable ]
# mount --make-unbindable /mnt
Lets try to bind mount this mount somewhere else.
Let's try to bind mount this mount somewhere else.
# mount --bind /mnt /tmp
mount: wrong fs type, bad option, bad superblock on /mnt,
or too many mounted file systems
@ -137,149 +135,15 @@ replicas continue to be exactly same.
Binding a unbindable mount is a invalid operation.
3) smount command
3) Setting mount states
Currently the mount command is not aware of shared subtree features.
Work is in progress to add the support in mount ( util-linux package ).
Till then use the following program.
The mount command (util-linux package) can be used to set mount
states:
------------------------------------------------------------------------
//
//this code was developed my Miklos Szeredi <miklos@szeredi.hu>
//and modified by Ram Pai <linuxram@us.ibm.com>
// sample usage:
// smount /tmp shared
//
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <sys/mount.h>
#include <sys/fsuid.h>
#ifndef MS_REC
#define MS_REC 0x4000 /* 16384: Recursive loopback */
#endif
#ifndef MS_SHARED
#define MS_SHARED 1<<20 /* Shared */
#endif
#ifndef MS_PRIVATE
#define MS_PRIVATE 1<<18 /* Private */
#endif
#ifndef MS_SLAVE
#define MS_SLAVE 1<<19 /* Slave */
#endif
#ifndef MS_UNBINDABLE
#define MS_UNBINDABLE 1<<17 /* Unbindable */
#endif
int main(int argc, char *argv[])
{
int type;
if(argc != 3) {
fprintf(stderr, "usage: %s dir "
"<rshared|rslave|rprivate|runbindable|shared|slave"
"|private|unbindable>\n" , argv[0]);
return 1;
}
fprintf(stdout, "%s %s %s\n", argv[0], argv[1], argv[2]);
if (strcmp(argv[2],"rshared")==0)
type=(MS_SHARED|MS_REC);
else if (strcmp(argv[2],"rslave")==0)
type=(MS_SLAVE|MS_REC);
else if (strcmp(argv[2],"rprivate")==0)
type=(MS_PRIVATE|MS_REC);
else if (strcmp(argv[2],"runbindable")==0)
type=(MS_UNBINDABLE|MS_REC);
else if (strcmp(argv[2],"shared")==0)
type=MS_SHARED;
else if (strcmp(argv[2],"slave")==0)
type=MS_SLAVE;
else if (strcmp(argv[2],"private")==0)
type=MS_PRIVATE;
else if (strcmp(argv[2],"unbindable")==0)
type=MS_UNBINDABLE;
else {
fprintf(stderr, "invalid operation: %s\n", argv[2]);
return 1;
}
setfsuid(getuid());
if(mount("", argv[1], "dontcare", type, "") == -1) {
perror("mount");
return 1;
}
return 0;
}
-----------------------------------------------------------------------
Copy the above code snippet into smount.c
gcc -o smount smount.c
(i) To mark all the mounts under /mnt as shared execute the following
command:
smount /mnt rshared
the corresponding syntax planned for mount command is
mount --make-rshared /mnt
just to mark a mount /mnt as shared, execute the following
command:
smount /mnt shared
the corresponding syntax planned for mount command is
mount --make-shared /mnt
(ii) To mark all the shared mounts under /mnt as slave execute the
following
command:
smount /mnt rslave
the corresponding syntax planned for mount command is
mount --make-rslave /mnt
just to mark a mount /mnt as slave, execute the following
command:
smount /mnt slave
the corresponding syntax planned for mount command is
mount --make-slave /mnt
(iii) To mark all the mounts under /mnt as private execute the
following command:
smount /mnt rprivate
the corresponding syntax planned for mount command is
mount --make-rprivate /mnt
just to mark a mount /mnt as private, execute the following
command:
smount /mnt private
the corresponding syntax planned for mount command is
mount --make-private /mnt
NOTE: by default all the mounts are created as private. But if
you want to change some shared/slave/unbindable mount as
private at a later point in time, this command can help.
(iv) To mark all the mounts under /mnt as unbindable execute the
following
command:
smount /mnt runbindable
the corresponding syntax planned for mount command is
mount --make-runbindable /mnt
just to mark a mount /mnt as unbindable, execute the following
command:
smount /mnt unbindable
the corresponding syntax planned for mount command is
mount --make-unbindable /mnt
mount --make-shared mountpoint
mount --make-slave mountpoint
mount --make-private mountpoint
mount --make-unbindable mountpoint
4) Use cases
@ -350,7 +214,7 @@ replicas continue to be exactly same.
mount --rbind / /view/v3
mount --rbind / /view/v4
and if /usr has a versioning filesystem mounted, than that
and if /usr has a versioning filesystem mounted, then that
mount appears at /view/v1/usr, /view/v2/usr, /view/v3/usr and
/view/v4/usr too
@ -390,7 +254,7 @@ replicas continue to be exactly same.
For example:
mount --make-shared /mnt
mount --bin /mnt /tmp
mount --bind /mnt /tmp
The mount at /mnt and that at /tmp are both shared and belong
to the same peer group. Anything mounted or unmounted under
@ -558,7 +422,7 @@ replicas continue to be exactly same.
then the subtree under the unbindable mount is pruned in the new
location.
eg: lets say we have the following mount tree.
eg: let's say we have the following mount tree.
A
/ \
@ -566,7 +430,7 @@ replicas continue to be exactly same.
/ \ / \
D E F G
Lets say all the mount except the mount C in the tree are
Let's say all the mount except the mount C in the tree are
of a type other than unbindable.
If this tree is rbound to say Z
@ -683,13 +547,13 @@ replicas continue to be exactly same.
'b' on mounts that receive propagation from mount 'B' and does not have
sub-mounts within them are unmounted.
Example: Lets say 'B1', 'B2', 'B3' are shared mounts that propagate to
Example: Let's say 'B1', 'B2', 'B3' are shared mounts that propagate to
each other.
lets say 'A1', 'A2', 'A3' are first mounted at dentry 'b' on mount
let's say 'A1', 'A2', 'A3' are first mounted at dentry 'b' on mount
'B1', 'B2' and 'B3' respectively.
lets say 'C1', 'C2', 'C3' are next mounted at the same dentry 'b' on
let's say 'C1', 'C2', 'C3' are next mounted at the same dentry 'b' on
mount 'B1', 'B2' and 'B3' respectively.
if 'C1' is unmounted, all the mounts that are most-recently-mounted on
@ -710,7 +574,7 @@ replicas continue to be exactly same.
A cloned namespace contains all the mounts as that of the parent
namespace.
Lets say 'A' and 'B' are the corresponding mounts in the parent and the
Let's say 'A' and 'B' are the corresponding mounts in the parent and the
child namespace.
If 'A' is shared, then 'B' is also shared and 'A' and 'B' propagate to
@ -759,11 +623,11 @@ replicas continue to be exactly same.
mount --make-slave /mnt
At this point we have the first mount at /tmp and
its root dentry is 1. Lets call this mount 'A'
its root dentry is 1. Let's call this mount 'A'
And then we have a second mount at /tmp1 with root
dentry 2. Lets call this mount 'B'
dentry 2. Let's call this mount 'B'
Next we have a third mount at /mnt with root dentry
mnt. Lets call this mount 'C'
mnt. Let's call this mount 'C'
'B' is the slave of 'A' and 'C' is a slave of 'B'
A -> B -> C
@ -794,7 +658,7 @@ replicas continue to be exactly same.
Q3 Why is unbindable mount needed?
Lets say we want to replicate the mount tree at multiple
Let's say we want to replicate the mount tree at multiple
locations within the same subtree.
if one rbind mounts a tree within the same subtree 'n' times
@ -803,7 +667,7 @@ replicas continue to be exactly same.
mounts. Here is a example.
step 1:
lets say the root tree has just two directories with
let's say the root tree has just two directories with
one vfsmount.
root
/ \
@ -875,7 +739,7 @@ replicas continue to be exactly same.
Unclonable mounts come in handy here.
step 1:
lets say the root tree has just two directories with
let's say the root tree has just two directories with
one vfsmount.
root
/ \

7
Documentation/filesystems/vfs.txt
View File

@ -536,6 +536,7 @@ struct address_space_operations {
/* migrate the contents of a page to the specified target */
int (*migratepage) (struct page *, struct page *);
int (*launder_page) (struct page *);
int (*error_remove_page) (struct mapping *mapping, struct page *page);
};
writepage: called by the VM to write a dirty page to backing store.
@ -694,6 +695,12 @@ struct address_space_operations {
prevent redirtying the page, it is kept locked during the whole
operation.
error_remove_page: normally set to generic_error_remove_page if truncation
is ok for this address space. Used for memory failure handling.
Setting this implies you deal with pages going away under you,
unless you have them locked or reference counts increased.
The File Object
===============

1
Documentation/ioctl/ioctl-number.txt
View File

@ -135,6 +135,7 @@ Code Seq# Include File Comments
<http://mikonos.dia.unisa.it/tcfs>
'l' 40-7F linux/udf_fs_i.h in development:
<http://sourceforge.net/projects/linux-udf/>
'm' 00-09 linux/mmtimer.h
'm' all linux/mtio.h conflict!
'm' all linux/soundcard.h conflict!
'm' all linux/synclink.h conflict!

15
Documentation/sysctl/fs.txt
View File

@ -96,13 +96,16 @@ handles that the Linux kernel will allocate. When you get lots
of error messages about running out of file handles, you might
want to increase this limit.
The three values in file-nr denote the number of allocated
file handles, the number of unused file handles and the maximum
number of file handles. When the allocated file handles come
close to the maximum, but the number of unused file handles is
significantly greater than 0, you've encountered a peak in your
usage of file handles and you don't need to increase the maximum.
Historically, the three values in file-nr denoted the number of
allocated file handles, the number of allocated but unused file
handles, and the maximum number of file handles. Linux 2.6 always
reports 0 as the number of free file handles -- this is not an
error, it just means that the number of allocated file handles
exactly matches the number of used file handles.
Attempts to allocate more file descriptors than file-max are
reported with printk, look for "VFS: file-max limit <number>
reached".
==============================================================
nr_open:

22
Documentation/sysctl/kernel.txt
View File

@ -22,6 +22,7 @@ show up in /proc/sys/kernel:
- callhome [ S390 only ]
- auto_msgmni
- core_pattern
- core_pipe_limit
- core_uses_pid
- ctrl-alt-del
- dentry-state
@ -135,6 +136,27 @@ core_pattern is used to specify a core dumpfile pattern name.
==============================================================
core_pipe_limit:
This sysctl is only applicable when core_pattern is configured to pipe core
files to user space helper a (when the first character of core_pattern is a '|',
see above). When collecting cores via a pipe to an application, it is
occasionally usefull for the collecting application to gather data about the
crashing process from its /proc/pid directory. In order to do this safely, the
kernel must wait for the collecting process to exit, so as not to remove the
crashing processes proc files prematurely. This in turn creates the possibility
that a misbehaving userspace collecting process can block the reaping of a
crashed process simply by never exiting. This sysctl defends against that. It
defines how many concurrent crashing processes may be piped to user space
applications in parallel. If this value is exceeded, then those crashing
processes above that value are noted via the kernel log and their cores are
skipped. 0 is a special value, indicating that unlimited processes may be
captured in parallel, but that no waiting will take place (i.e. the collecting
process is not guaranteed access to /proc/<crahing pid>/). This value defaults
to 0.
==============================================================
core_uses_pid:
The default coredump filename is "core". By setting

41
Documentation/sysctl/vm.txt
View File

@ -32,6 +32,8 @@ Currently, these files are in /proc/sys/vm:
- legacy_va_layout
- lowmem_reserve_ratio
- max_map_count
- memory_failure_early_kill
- memory_failure_recovery
- min_free_kbytes
- min_slab_ratio
- min_unmapped_ratio
@ -53,7 +55,6 @@ Currently, these files are in /proc/sys/vm:
- vfs_cache_pressure
- zone_reclaim_mode
==============================================================
block_dump
@ -275,6 +276,44 @@ e.g., up to one or two maps per allocation.
The default value is 65536.
=============================================================
memory_failure_early_kill:
Control how to kill processes when uncorrected memory error (typically
a 2bit error in a memory module) is detected in the background by hardware
that cannot be handled by the kernel. In some cases (like the page
still having a valid copy on disk) the kernel will handle the failure
transparently without affecting any applications. But if there is
no other uptodate copy of the data it will kill to prevent any data
corruptions from propagating.
1: Kill all processes that have the corrupted and not reloadable page mapped
as soon as the corruption is detected. Note this is not supported
for a few types of pages, like kernel internally allocated data or
the swap cache, but works for the majority of user pages.
0: Only unmap the corrupted page from all processes and only kill a process
who tries to access it.
The kill is done using a catchable SIGBUS with BUS_MCEERR_AO, so processes can
handle this if they want to.
This is only active on architectures/platforms with advanced machine
check handling and depends on the hardware capabilities.
Applications can override this setting individually with the PR_MCE_KILL prctl
==============================================================
memory_failure_recovery
Enable memory failure recovery (when supported by the platform)
1: Attempt recovery.
0: Always panic on a memory failure.
==============================================================
min_free_kbytes:

1
Documentation/vm/.gitignore vendored
View File

@ -1 +1,2 @@
page-types
slabinfo

2
Documentation/vm/locking
View File

@ -80,7 +80,7 @@ Note: PTL can also be used to guarantee that no new clones using the
mm start up ... this is a loose form of stability on mm_users. For
example, it is used in copy_mm to protect against a racing tlb_gather_mmu
single address space optimization, so that the zap_page_range (from
vmtruncate) does not lose sending ipi's to cloned threads that might
truncate) does not lose sending ipi's to cloned threads that might
be spawned underneath it and go to user mode to drag in pte's into tlbs.
swap_lock

200
Documentation/vm/page-types.c
View File

@ -5,6 +5,7 @@
* Copyright (C) 2009 Wu Fengguang <fengguang.wu@intel.com>
*/
#define _LARGEFILE64_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
@ -13,11 +14,32 @@
#include <string.h>
#include <getopt.h>
#include <limits.h>
#include <assert.h>
#include <sys/types.h>
#include <sys/errno.h>
#include <sys/fcntl.h>
/*
* pagemap kernel ABI bits
*/
#define PM_ENTRY_BYTES sizeof(uint64_t)
#define PM_STATUS_BITS 3
#define PM_STATUS_OFFSET (64 - PM_STATUS_BITS)
#define PM_STATUS_MASK (((1LL << PM_STATUS_BITS) - 1) << PM_STATUS_OFFSET)
#define PM_STATUS(nr) (((nr) << PM_STATUS_OFFSET) & PM_STATUS_MASK)
#define PM_PSHIFT_BITS 6
#define PM_PSHIFT_OFFSET (PM_STATUS_OFFSET - PM_PSHIFT_BITS)
#define PM_PSHIFT_MASK (((1LL << PM_PSHIFT_BITS) - 1) << PM_PSHIFT_OFFSET)
#define PM_PSHIFT(x) (((u64) (x) << PM_PSHIFT_OFFSET) & PM_PSHIFT_MASK)
#define PM_PFRAME_MASK ((1LL << PM_PSHIFT_OFFSET) - 1)
#define PM_PFRAME(x) ((x) & PM_PFRAME_MASK)
#define PM_PRESENT PM_STATUS(4LL)
#define PM_SWAP PM_STATUS(2LL)
/*
* kernel page flags
*/
@ -126,6 +148,14 @@ static int nr_addr_ranges;
static unsigned long opt_offset[MAX_ADDR_RANGES];
static unsigned long opt_size[MAX_ADDR_RANGES];
#define MAX_VMAS 10240
static int nr_vmas;
static unsigned long pg_start[MAX_VMAS];
static unsigned long pg_end[MAX_VMAS];
static unsigned long voffset;
static int pagemap_fd;
#define MAX_BIT_FILTERS 64
static int nr_bit_filters;
static uint64_t opt_mask[MAX_BIT_FILTERS];
@ -135,7 +165,6 @@ static int page_size;
#define PAGES_BATCH (64 << 10) /* 64k pages */
static int kpageflags_fd;
static uint64_t kpageflags_buf[KPF_BYTES * PAGES_BATCH];
#define HASH_SHIFT 13
#define HASH_SIZE (1 << HASH_SHIFT)
@ -158,6 +187,11 @@ static uint64_t page_flags[HASH_SIZE];
type __min2 = (y); \
__min1 < __min2 ? __min1 : __min2; })
#define max_t(type, x, y) ({ \
type __max1 = (x); \
type __max2 = (y); \
__max1 > __max2 ? __max1 : __max2; })
static unsigned long pages2mb(unsigned long pages)
{
return (pages * page_size) >> 20;
@ -224,26 +258,34 @@ static char *page_flag_longname(uint64_t flags)
static void show_page_range(unsigned long offset, uint64_t flags)
{
static uint64_t flags0;
static unsigned long voff;
static unsigned long index;
static unsigned long count;
if (flags == flags0 && offset == index + count) {
if (flags == flags0 && offset == index + count &&
(!opt_pid || voffset == voff + count)) {
count++;
return;
}
if (count)
printf("%lu\t%lu\t%s\n",
if (count) {
if (opt_pid)
printf("%lx\t", voff);
printf("%lx\t%lx\t%s\n",
index, count, page_flag_name(flags0));
}
flags0 = flags;
index = offset;
voff = voffset;
count = 1;
}
static void show_page(unsigned long offset, uint64_t flags)
{
printf("%lu\t%s\n", offset, page_flag_name(flags));
if (opt_pid)
printf("%lx\t", voffset);
printf("%lx\t%s\n", offset, page_flag_name(flags));
}
static void show_summary(void)
@ -383,6 +425,8 @@ static void walk_pfn(unsigned long index, unsigned long count)
lseek(kpageflags_fd, index * KPF_BYTES, SEEK_SET);
while (count) {
uint64_t kpageflags_buf[KPF_BYTES * PAGES_BATCH];
batch = min_t(unsigned long, count, PAGES_BATCH);
n = read(kpageflags_fd, kpageflags_buf, batch * KPF_BYTES);
if (n == 0)
@ -404,6 +448,81 @@ static void walk_pfn(unsigned long index, unsigned long count)
}
}
#define PAGEMAP_BATCH 4096
static unsigned long task_pfn(unsigned long pgoff)
{
static uint64_t buf[PAGEMAP_BATCH];
static unsigned long start;
static long count;
uint64_t pfn;
if (pgoff < start || pgoff >= start + count) {
if (lseek64(pagemap_fd,
(uint64_t)pgoff * PM_ENTRY_BYTES,
SEEK_SET) < 0) {
perror("pagemap seek");
exit(EXIT_FAILURE);
}
count = read(pagemap_fd, buf, sizeof(buf));
if (count == 0)
return 0;
if (count < 0) {
perror("pagemap read");
exit(EXIT_FAILURE);
}
if (count % PM_ENTRY_BYTES) {
fatal("pagemap read not aligned.\n");
exit(EXIT_FAILURE);
}
count /= PM_ENTRY_BYTES;
start = pgoff;
}
pfn = buf[pgoff - start];
if (pfn & PM_PRESENT)
pfn = PM_PFRAME(pfn);
else
pfn = 0;
return pfn;
}
static void walk_task(unsigned long index, unsigned long count)
{
int i = 0;
const unsigned long end = index + count;
while (index < end) {
while (pg_end[i] <= index)
if (++i >= nr_vmas)
return;
if (pg_start[i] >= end)
return;
voffset = max_t(unsigned long, pg_start[i], index);
index = min_t(unsigned long, pg_end[i], end);
assert(voffset < index);
for (; voffset < index; voffset++) {
unsigned long pfn = task_pfn(voffset);
if (pfn)
walk_pfn(pfn, 1);
}
}
}
static void add_addr_range(unsigned long offset, unsigned long size)
{
if (nr_addr_ranges >= MAX_ADDR_RANGES)
fatal("too many addr ranges\n");
opt_offset[nr_addr_ranges] = offset;
opt_size[nr_addr_ranges] = min_t(unsigned long, size, ULONG_MAX-offset);
nr_addr_ranges++;
}
static void walk_addr_ranges(void)
{
int i;
@ -415,10 +534,13 @@ static void walk_addr_ranges(void)
}
if (!nr_addr_ranges)
walk_pfn(0, ULONG_MAX);
add_addr_range(0, ULONG_MAX);
for (i = 0; i < nr_addr_ranges; i++)
walk_pfn(opt_offset[i], opt_size[i]);
if (!opt_pid)
walk_pfn(opt_offset[i], opt_size[i]);
else
walk_task(opt_offset[i], opt_size[i]);
close(kpageflags_fd);
}
@ -446,8 +568,8 @@ static void usage(void)
" -r|--raw Raw mode, for kernel developers\n"
" -a|--addr addr-spec Walk a range of pages\n"
" -b|--bits bits-spec Walk pages with specified bits\n"
#if 0 /* planned features */
" -p|--pid pid Walk process address space\n"
#if 0 /* planned features */
" -f|--file filename Walk file address space\n"
#endif
" -l|--list Show page details in ranges\n"
@ -459,7 +581,7 @@ static void usage(void)
" N+M pages range from N to N+M-1\n"
" N,M pages range from N to M-1\n"
" N, pages range from N to end\n"
" ,M pages range from 0 to M\n"
" ,M pages range from 0 to M-1\n"
"bits-spec:\n"
" bit1,bit2 (flags & (bit1|bit2)) != 0\n"
" bit1,bit2=bit1 (flags & (bit1|bit2)) == bit1\n"
@ -496,23 +618,59 @@ static unsigned long long parse_number(const char *str)
static void parse_pid(const char *str)
{
FILE *file;
char buf[5000];
opt_pid = parse_number(str);
sprintf(buf, "/proc/%d/pagemap", opt_pid);
pagemap_fd = open(buf, O_RDONLY);
if (pagemap_fd < 0) {
perror(buf);
exit(EXIT_FAILURE);
}
sprintf(buf, "/proc/%d/maps", opt_pid);
file = fopen(buf, "r");
if (!file) {
perror(buf);
exit(EXIT_FAILURE);
}
while (fgets(buf, sizeof(buf), file) != NULL) {
unsigned long vm_start;
unsigned long vm_end;
unsigned long long pgoff;
int major, minor;
char r, w, x, s;
unsigned long ino;
int n;
n = sscanf(buf, "%lx-%lx %c%c%c%c %llx %x:%x %lu",
&vm_start,
&vm_end,
&r, &w, &x, &s,
&pgoff,
&major, &minor,
&ino);
if (n < 10) {
fprintf(stderr, "unexpected line: %s\n", buf);
continue;
}
pg_start[nr_vmas] = vm_start / page_size;
pg_end[nr_vmas] = vm_end / page_size;
if (++nr_vmas >= MAX_VMAS) {
fprintf(stderr, "too many VMAs\n");
break;
}
}
fclose(file);
}
static void parse_file(const char *name)
{
}
static void add_addr_range(unsigned long offset, unsigned long size)
{
if (nr_addr_ranges >= MAX_ADDR_RANGES)
fatal("too much addr ranges\n");
opt_offset[nr_addr_ranges] = offset;
opt_size[nr_addr_ranges] = size;
nr_addr_ranges++;
}
static void parse_addr_range(const char *optarg)
{
unsigned long offset;
@ -676,8 +834,10 @@ int main(int argc, char *argv[])
}
}
if (opt_list && opt_pid)
printf("voffset\t");
if (opt_list == 1)
printf("offset\tcount\tflags\n");
printf("offset\tlen\tflags\n");
if (opt_list == 2)
printf("offset\tflags\n");

33
MAINTAINERS
View File

@ -257,12 +257,6 @@ W: http://www.lesswatts.org/projects/acpi/
S: Supported
F: drivers/acpi/fan.c
ACPI PCI HOTPLUG DRIVER
M: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
L: linux-pci@vger.kernel.org
S: Supported
F: drivers/pci/hotplug/acpi*
ACPI THERMAL DRIVER
M: Zhang Rui <rui.zhang@intel.com>
L: linux-acpi@vger.kernel.org
@ -689,7 +683,7 @@ S: Maintained
ARM/INTEL IXP4XX ARM ARCHITECTURE
M: Imre Kaloz <kaloz@openwrt.org>
M: Krzysztof Halasa <khc@pm.waw.pl>
L: linux-arm-kernel@lists.infradead.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-ixp4xx/
@ -746,18 +740,22 @@ M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
M: Dirk Opfer <dirk@opfer-online.de>
S: Maintained
ARM/PALMTX,PALMT5,PALMLD,PALMTE2 SUPPORT
M: Marek Vasut <marek.vasut@gmail.com>
ARM/PALMTX,PALMT5,PALMLD,PALMTE2,PALMTC SUPPORT
P: Marek Vasut
M: marek.vasut@gmail.com
L: linux-arm-kernel@lists.infradead.org
W: http://hackndev.com
S: Maintained
ARM/PALM TREO 680 SUPPORT
M: Tomas Cech <sleep_walker@suse.cz>
L: linux-arm-kernel@lists.infradead.org
W: http://hackndev.com
S: Maintained
ARM/PALMZ72 SUPPORT
M: Sergey Lapin <slapin@ossfans.org>
L: linux-arm-kernel@lists.infradead.org
W: http://hackndev.com
S: Maintained
@ -2331,7 +2329,9 @@ S: Orphan
F: drivers/hwmon/
HARDWARE RANDOM NUMBER GENERATOR CORE
S: Orphan
M: Matt Mackall <mpm@selenic.com>
M: Herbert Xu <herbert@gondor.apana.org.au>
S: Odd fixes
F: Documentation/hw_random.txt
F: drivers/char/hw_random/
F: include/linux/hw_random.h
@ -4003,11 +4003,11 @@ F: Documentation/PCI/
F: drivers/pci/
F: include/linux/pci*
PCIE HOTPLUG DRIVER
M: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
PCI HOTPLUG
M: Jesse Barnes <jbarnes@virtuousgeek.org>
L: linux-pci@vger.kernel.org
S: Supported
F: drivers/pci/pcie/
F: drivers/pci/hotplug
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
@ -4670,12 +4670,6 @@ F: drivers/serial/serial_lh7a40x.c
F: drivers/usb/gadget/lh7a40*
F: drivers/usb/host/ohci-lh7a40*
SHPC HOTPLUG DRIVER
M: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
L: linux-pci@vger.kernel.org
S: Supported
F: drivers/pci/hotplug/shpchp*
SIMPLE FIRMWARE INTERFACE (SFI)
P: Len Brown
M: lenb@kernel.org
@ -4687,7 +4681,6 @@ F: arch/x86/kernel/*sfi*
F: drivers/sfi/
F: include/linux/sfi*.h
SIMTEC EB110ATX (Chalice CATS)
P: Ben Dooks
M: Vincent Sanders <support@simtec.co.uk>

2
arch/alpha/include/asm/fcntl.h
View File

@ -26,6 +26,8 @@
#define F_GETOWN 6 /* for sockets. */
#define F_SETSIG 10 /* for sockets. */
#define F_GETSIG 11 /* for sockets. */
#define F_SETOWN_EX 12
#define F_GETOWN_EX 13
/* for posix fcntl() and lockf() */
#define F_RDLCK 1

2
arch/alpha/kernel/core_marvel.c
View File

@ -1016,7 +1016,7 @@ marvel_agp_bind_memory(alpha_agp_info *agp, off_t pg_start, struct agp_memory *m
{
struct marvel_agp_aperture *aper = agp->aperture.sysdata;
return iommu_bind(aper->arena, aper->pg_start + pg_start,
mem->page_count, mem->memory);
mem->page_count, mem->pages);
}
static int

2
arch/alpha/kernel/core_titan.c
View File

@ -680,7 +680,7 @@ titan_agp_bind_memory(alpha_agp_info *agp, off_t pg_start, struct agp_memory *me
{
struct titan_agp_aperture *aper = agp->aperture.sysdata;
return iommu_bind(aper->arena, aper->pg_start + pg_start,
mem->page_count, mem->memory);
mem->page_count, mem->pages);
}
static int

5
arch/alpha/kernel/init_task.c
View File

@ -13,6 +13,5 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct task_struct init_task = INIT_TASK(init_task);
EXPORT_SYMBOL(init_task);
union thread_union init_thread_union
__attribute__((section(".data.init_thread")))
= { INIT_THREAD_INFO(init_task) };
union thread_union init_thread_union __init_task_data =
{ INIT_THREAD_INFO(init_task) };

2
arch/alpha/kernel/pci_impl.h
View File

@ -198,7 +198,7 @@ extern unsigned long size_for_memory(unsigned long max);
extern int iommu_reserve(struct pci_iommu_arena *, long, long);
extern int iommu_release(struct pci_iommu_arena *, long, long);
extern int iommu_bind(struct pci_iommu_arena *, long, long, unsigned long *);
extern int iommu_bind(struct pci_iommu_arena *, long, long, struct page **);
extern int iommu_unbind(struct pci_iommu_arena *, long, long);

4
arch/alpha/kernel/pci_iommu.c
View File

@ -876,7 +876,7 @@ iommu_release(struct pci_iommu_arena *arena, long pg_start, long pg_count)
int
iommu_bind(struct pci_iommu_arena *arena, long pg_start, long pg_count,
unsigned long *physaddrs)
struct page **pages)
{
unsigned long flags;
unsigned long *ptes;
@ -896,7 +896,7 @@ iommu_bind(struct pci_iommu_arena *arena, long pg_start, long pg_count,
}
for(i = 0, j = pg_start; i < pg_count; i++, j++)
ptes[j] = mk_iommu_pte(physaddrs[i]);
ptes[j] = mk_iommu_pte(page_to_phys(pages[i]));
spin_unlock_irqrestore(&arena->lock, flags);

95
arch/alpha/kernel/vmlinux.lds.S
View File

@ -1,5 +1,6 @@
#include <asm-generic/vmlinux.lds.h>
#include <asm/page.h>
#include <asm/thread_info.h>
OUTPUT_FORMAT("elf64-alpha")
OUTPUT_ARCH(alpha)
@ -31,88 +32,21 @@ SECTIONS
} :kernel
RODATA
/* Exception table */
. = ALIGN(16);
__ex_table : {
__start___ex_table = .;
*(__ex_table)
__stop___ex_table = .;
}
EXCEPTION_TABLE(16)
/* Will be freed after init */
. = ALIGN(PAGE_SIZE);
/* Init code and data */
__init_begin = .;
.init.text : {
_sinittext = .;
INIT_TEXT
_einittext = .;
}
.init.data : {
INIT_DATA
}
. = ALIGN(16);
.init.setup : {
__setup_start = .;
*(.init.setup)
__setup_end = .;
}
. = ALIGN(8);
.initcall.init : {
__initcall_start = .;
INITCALLS
__initcall_end = .;
}
#ifdef CONFIG_BLK_DEV_INITRD
. = ALIGN(PAGE_SIZE);
.init.ramfs : {
__initramfs_start = .;
*(.init.ramfs)
__initramfs_end = .;
}
#endif
. = ALIGN(8);
.con_initcall.init : {
__con_initcall_start = .;
*(.con_initcall.init)
__con_initcall_end = .;
}
. = ALIGN(8);
SECURITY_INIT
__init_begin = ALIGN(PAGE_SIZE);
INIT_TEXT_SECTION(PAGE_SIZE)
INIT_DATA_SECTION(16)
PERCPU(PAGE_SIZE)
. = ALIGN(2 * PAGE_SIZE);
/* Align to THREAD_SIZE rather than PAGE_SIZE here so any padding page
needed for the THREAD_SIZE aligned init_task gets freed after init */
. = ALIGN(THREAD_SIZE);
__init_end = .;
/* Freed after init ends here */
/* Note 2 page alignment above. */
.data.init_thread : {
*(.data.init_thread)
}
. = ALIGN(PAGE_SIZE);
.data.page_aligned : {
*(.data.page_aligned)
}
. = ALIGN(64);
.data.cacheline_aligned : {
*(.data.cacheline_aligned)
}
_data = .;
/* Data */
.data : {
DATA_DATA
CONSTRUCTORS
}
RW_DATA_SECTION(64, PAGE_SIZE, THREAD_SIZE)
.got : {
*(.got)
@ -122,16 +56,7 @@ SECTIONS
}
_edata = .; /* End of data section */
__bss_start = .;
.sbss : {
*(.sbss)
*(.scommon)
}
.bss : {
*(.bss)
*(COMMON)
}
__bss_stop = .;
BSS_SECTION(0, 0, 0)
_end = .;
.mdebug 0 : {

5
arch/arm/Kconfig
View File

@ -46,6 +46,10 @@ config GENERIC_CLOCKEVENTS_BROADCAST
depends on GENERIC_CLOCKEVENTS
default y if SMP && !LOCAL_TIMERS
config HAVE_TCM
bool
select GENERIC_ALLOCATOR
config NO_IOPORT
bool
@ -649,6 +653,7 @@ config ARCH_U300
bool "ST-Ericsson U300 Series"
depends on MMU
select CPU_ARM926T
select HAVE_TCM
select ARM_AMBA
select ARM_VIC
select GENERIC_TIME

17
arch/arm/common/locomo.c
View File

@ -865,6 +865,7 @@ void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir
spin_unlock_irqrestore(&lchip->lock, flags);
}
EXPORT_SYMBOL(locomo_gpio_set_dir);
int locomo_gpio_read_level(struct device *dev, unsigned int bits)
{
@ -882,6 +883,7 @@ int locomo_gpio_read_level(struct device *dev, unsigned int bits)
ret &= bits;
return ret;
}
EXPORT_SYMBOL(locomo_gpio_read_level);
int locomo_gpio_read_output(struct device *dev, unsigned int bits)
{
@ -899,6 +901,7 @@ int locomo_gpio_read_output(struct device *dev, unsigned int bits)
ret &= bits;
return ret;
}
EXPORT_SYMBOL(locomo_gpio_read_output);
void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set)
{
@ -920,6 +923,7 @@ void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set)
spin_unlock_irqrestore(&lchip->lock, flags);
}
EXPORT_SYMBOL(locomo_gpio_write);
static void locomo_m62332_sendbit(void *mapbase, int bit)
{
@ -1084,13 +1088,12 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int
spin_unlock_irqrestore(&lchip->lock, flags);
}
EXPORT_SYMBOL(locomo_m62332_senddata);
/*
* Frontlight control
*/
static struct locomo *locomo_chip_driver(struct locomo_dev *ldev);
void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf)
{
unsigned long flags;
@ -1182,11 +1185,13 @@ int locomo_driver_register(struct locomo_driver *driver)
driver->drv.bus = &locomo_bus_type;
return driver_register(&driver->drv);
}
EXPORT_SYMBOL(locomo_driver_register);
void locomo_driver_unregister(struct locomo_driver *driver)
{
driver_unregister(&driver->drv);
}
EXPORT_SYMBOL(locomo_driver_unregister);
static int __init locomo_init(void)
{
@ -1208,11 +1213,3 @@ module_exit(locomo_exit);
MODULE_DESCRIPTION("Sharp LoCoMo core driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
EXPORT_SYMBOL(locomo_driver_register);
EXPORT_SYMBOL(locomo_driver_unregister);
EXPORT_SYMBOL(locomo_gpio_set_dir);
EXPORT_SYMBOL(locomo_gpio_read_level);
EXPORT_SYMBOL(locomo_gpio_read_output);
EXPORT_SYMBOL(locomo_gpio_write);
EXPORT_SYMBOL(locomo_m62332_senddata);

1
arch/arm/common/vic.c
View File

@ -22,6 +22,7 @@
#include <linux/list.h>
#include <linux/io.h>
#include <linux/sysdev.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <asm/mach/irq.h>

783
arch/arm/configs/littleton_defconfig
View File

@ -1,783 +0,0 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc5
# Fri Dec 21 11:06:19 2007
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# System Type
#
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
#
# Intel PXA2xx/PXA3xx Implementations
#
#
# Supported PXA3xx Processor Variants
#
CONFIG_CPU_PXA300=y
CONFIG_CPU_PXA310=y
# CONFIG_CPU_PXA320 is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
# CONFIG_ARCH_PXA_IDP is not set
# CONFIG_PXA_SHARPSL is not set
# CONFIG_MACH_TRIZEPS4 is not set
# CONFIG_MACH_EM_X270 is not set
# CONFIG_MACH_ZYLONITE is not set
CONFIG_MACH_LITTLETON=y
# CONFIG_MACH_ARMCORE is not set
CONFIG_PXA3xx=y
CONFIG_PXA_SSP=y
#
# Boot options
#
#
# Power management
#
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_XSC3=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_IO_36=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
# CONFIG_OUTER_CACHE is not set
CONFIG_IWMMXT=y
#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_ALIGNMENT_TRAP=y
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=64M"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
CONFIG_SUSPEND_UP_POSSIBLE=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
# CONFIG_SMC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
# CONFIG_FB_PXA_PARAMETERS is not set
# CONFIG_FB_MBX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_ECB is not set
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

1332
arch/arm/configs/pxa3xx_defconfig Normal file
View File

File diff suppressed because it is too large Load Diff

1129
arch/arm/configs/xcep_defconfig Normal file
View File

File diff suppressed because it is too large Load Diff

736
arch/arm/configs/zylonite_defconfig
View File

@ -1,736 +0,0 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.23
# Tue Oct 23 13:33:20 2007
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# System Type
#
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
#
# Intel PXA2xx/PXA3xx Implementations
#
#
# Supported PXA3xx Processor Variants
#
CONFIG_CPU_PXA300=y
CONFIG_CPU_PXA310=y
CONFIG_CPU_PXA320=y
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
# CONFIG_ARCH_PXA_IDP is not set
# CONFIG_PXA_SHARPSL is not set
# CONFIG_MACH_TRIZEPS4 is not set
# CONFIG_MACH_EM_X270 is not set
CONFIG_MACH_ZYLONITE=y
# CONFIG_MACH_ARMCORE is not set
CONFIG_PXA3xx=y
#
# Boot options
#
#
# Power management
#
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_XSC3=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_IO_36=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
# CONFIG_OUTER_CACHE is not set
CONFIG_IWMMXT=y
#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_ALIGNMENT_TRAP=y
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfs/rootfs/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,38400 mem=64M debug"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
CONFIG_SUSPEND_UP_POSSIBLE=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
# CONFIG_SMC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
# CONFIG_FB_PXA_PARAMETERS is not set
# CONFIG_FB_MBX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
# CONFIG_FONT_8x16 is not set
CONFIG_FONT_6x11=y
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FRAME_POINTER=y
# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_ECB is not set
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

26
arch/arm/include/asm/atomic.h
View File

@ -19,31 +19,21 @@
#ifdef __KERNEL__
/*
* On ARM, ordinary assignment (str instruction) doesn't clear the local
* strex/ldrex monitor on some implementations. The reason we can use it for
* atomic_set() is the clrex or dummy strex done on every exception return.
*/
#define atomic_read(v) ((v)->counter)
#define atomic_set(v,i) (((v)->counter) = (i))
#if __LINUX_ARM_ARCH__ >= 6
/*
* ARMv6 UP and SMP safe atomic ops. We use load exclusive and
* store exclusive to ensure that these are atomic. We may loop
* to ensure that the update happens. Writing to 'v->counter'
* without using the following operations WILL break the atomic
* nature of these ops.
* to ensure that the update happens.
*/
static inline void atomic_set(atomic_t *v, int i)
{
unsigned long tmp;
__asm__ __volatile__("@ atomic_set\n"
"1: ldrex %0, [%1]\n"
" strex %0, %2, [%1]\n"
" teq %0, #0\n"
" bne 1b"
: "=&r" (tmp)
: "r" (&v->counter), "r" (i)
: "cc");
}
static inline void atomic_add(int i, atomic_t *v)
{
unsigned long tmp;
@ -163,8 +153,6 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
#error SMP not supported on pre-ARMv6 CPUs
#endif
#define atomic_set(v,i) (((v)->counter) = (i))
static inline int atomic_add_return(int i, atomic_t *v)
{
unsigned long flags;

2
arch/arm/include/asm/cache.h
View File

@ -4,7 +4,7 @@
#ifndef __ASMARM_CACHE_H
#define __ASMARM_CACHE_H
#define L1_CACHE_SHIFT 5
#define L1_CACHE_SHIFT CONFIG_ARM_L1_CACHE_SHIFT
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
/*

10
arch/arm/include/asm/cputype.h
View File

@ -63,6 +63,11 @@ static inline unsigned int __attribute_const__ read_cpuid_cachetype(void)
return read_cpuid(CPUID_CACHETYPE);
}
static inline unsigned int __attribute_const__ read_cpuid_tcmstatus(void)
{
return read_cpuid(CPUID_TCM);
}
/*
* Intel's XScale3 core supports some v6 features (supersections, L2)
* but advertises itself as v5 as it does not support the v6 ISA. For
@ -73,7 +78,10 @@ static inline unsigned int __attribute_const__ read_cpuid_cachetype(void)
#else
static inline int cpu_is_xsc3(void)
{
if ((read_cpuid_id() & 0xffffe000) == 0x69056000)
unsigned int id;
id = read_cpuid_id() & 0xffffe000;
/* It covers both Intel ID and Marvell ID */
if ((id == 0x69056000) || (id == 0x56056000))
return 1;
return 0;

81
arch/arm/include/asm/hardware/iop3xx-adma.h
View File

@ -187,11 +187,74 @@ union iop3xx_desc {
void *ptr;
};
/* No support for p+q operations */
static inline int
iop_chan_pq_slot_count(size_t len, int src_cnt, int *slots_per_op)
{
BUG();
return 0;
}
static inline void
iop_desc_init_pq(struct iop_adma_desc_slot *desc, int src_cnt,
unsigned long flags)
{
BUG();
}
static inline void
iop_desc_set_pq_addr(struct iop_adma_desc_slot *desc, dma_addr_t *addr)
{
BUG();
}
static inline void
iop_desc_set_pq_src_addr(struct iop_adma_desc_slot *desc, int src_idx,
dma_addr_t addr, unsigned char coef)
{
BUG();
}
static inline int
iop_chan_pq_zero_sum_slot_count(size_t len, int src_cnt, int *slots_per_op)
{
BUG();
return 0;
}
static inline void
iop_desc_init_pq_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
unsigned long flags)
{
BUG();
}
static inline void
iop_desc_set_pq_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
{
BUG();
}
#define iop_desc_set_pq_zero_sum_src_addr iop_desc_set_pq_src_addr
static inline void
iop_desc_set_pq_zero_sum_addr(struct iop_adma_desc_slot *desc, int pq_idx,
dma_addr_t *src)
{
BUG();
}
static inline int iop_adma_get_max_xor(void)
{
return 32;
}
static inline int iop_adma_get_max_pq(void)
{
BUG();
return 0;
}
static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
{
int id = chan->device->id;
@ -332,6 +395,11 @@ static inline int iop_chan_zero_sum_slot_count(size_t len, int src_cnt,
return slot_cnt;
}
static inline int iop_desc_is_pq(struct iop_adma_desc_slot *desc)
{
return 0;
}
static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan)
{
@ -349,6 +417,14 @@ static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
return 0;
}
static inline u32 iop_desc_get_qdest_addr(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan)
{
BUG();
return 0;
}
static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan)
{
@ -756,13 +832,14 @@ static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc,
hw_desc->src[0] = val;
}
static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
static inline enum sum_check_flags
iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
{
struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
struct iop3xx_aau_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
iop_paranoia(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en));
return desc_ctrl.zero_result_err;
return desc_ctrl.zero_result_err << SUM_CHECK_P;
}
static inline void iop_chan_append(struct iop_adma_chan *chan)

3
arch/arm/include/asm/hardware/iop_adma.h
View File

@ -86,6 +86,7 @@ struct iop_adma_chan {
* @idx: pool index
* @unmap_src_cnt: number of xor sources
* @unmap_len: transaction bytecount
* @tx_list: list of descriptors that are associated with one operation
* @async_tx: support for the async_tx api
* @group_list: list of slots that make up a multi-descriptor transaction
* for example transfer lengths larger than the supported hw max
@ -102,10 +103,12 @@ struct iop_adma_desc_slot {
u16 idx;
u16 unmap_src_cnt;
size_t unmap_len;
struct list_head tx_list;
struct dma_async_tx_descriptor async_tx;
union {
u32 *xor_check_result;
u32 *crc32_result;
u32 *pq_check_result;
};
};

31
arch/arm/include/asm/tcm.h Normal file
View File

@ -0,0 +1,31 @@
/*
*
* Copyright (C) 2008-2009 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
*
* Author: Rickard Andersson <rickard.andersson@stericsson.com>
* Author: Linus Walleij <linus.walleij@stericsson.com>
*
*/
#ifndef __ASMARM_TCM_H
#define __ASMARM_TCM_H
#ifndef CONFIG_HAVE_TCM
#error "You should not be including tcm.h unless you have a TCM!"
#endif
#include <linux/compiler.h>
/* Tag variables with this */
#define __tcmdata __section(.tcm.data)
/* Tag constants with this */
#define __tcmconst __section(.tcm.rodata)
/* Tag functions inside TCM called from outside TCM with this */
#define __tcmfunc __attribute__((long_call)) __section(.tcm.text) noinline
/* Tag function inside TCM called from inside TCM with this */
#define __tcmlocalfunc __section(.tcm.text)
void *tcm_alloc(size_t len);
void tcm_free(void *addr, size_t len);
#endif

4
arch/arm/include/asm/unified.h
View File

@ -35,7 +35,9 @@
#define ARM(x...)
#define THUMB(x...) x
#ifdef __ASSEMBLY__
#define W(instr) instr.w
#endif
#define BSYM(sym) sym + 1
#else /* !CONFIG_THUMB2_KERNEL */
@ -45,7 +47,9 @@
#define ARM(x...) x
#define THUMB(x...)
#ifdef __ASSEMBLY__
#define W(instr) instr
#endif
#define BSYM(sym) sym
#endif /* CONFIG_THUMB2_KERNEL */

1
arch/arm/kernel/Makefile
View File

@ -35,6 +35,7 @@ obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
obj-$(CONFIG_ARM_THUMBEE) += thumbee.o
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_ARM_UNWIND) += unwind.o
obj-$(CONFIG_HAVE_TCM) += tcm.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312

19
arch/arm/kernel/entry-armv.S
View File

@ -272,7 +272,15 @@ __und_svc:
@
@ r0 - instruction
@
#ifndef CONFIG_THUMB2_KERNEL
ldr r0, [r2, #-4]
#else
ldrh r0, [r2, #-2] @ Thumb instruction at LR - 2
and r9, r0, #0xf800
cmp r9, #0xe800 @ 32-bit instruction if xx >= 0
ldrhhs r9, [r2] @ bottom 16 bits
orrhs r0, r9, r0, lsl #16
#endif
adr r9, BSYM(1f)
bl call_fpe
@ -678,7 +686,9 @@ ENTRY(fp_enter)
.word no_fp
.previous
no_fp: mov pc, lr
ENTRY(no_fp)
mov pc, lr
ENDPROC(no_fp)
__und_usr_unknown:
enable_irq
@ -734,13 +744,6 @@ ENTRY(__switch_to)
#ifdef CONFIG_MMU
ldr r6, [r2, #TI_CPU_DOMAIN]
#endif
#if __LINUX_ARM_ARCH__ >= 6
#ifdef CONFIG_CPU_32v6K
clrex
#else
strex r5, r4, [ip] @ Clear exclusive monitor
#endif
#endif
#if defined(CONFIG_HAS_TLS_REG)
mcr p15, 0, r3, c13, c0, 3 @ set TLS register
#elif !defined(CONFIG_TLS_REG_EMUL)

14
arch/arm/kernel/entry-header.S
View File

@ -76,13 +76,25 @@
#ifndef CONFIG_THUMB2_KERNEL
.macro svc_exit, rpsr
msr spsr_cxsf, \rpsr
#if defined(CONFIG_CPU_32v6K)
clrex @ clear the exclusive monitor
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
#elif defined (CONFIG_CPU_V6)
ldr r0, [sp]
strex r1, r2, [sp] @ clear the exclusive monitor
ldmib sp, {r1 - pc}^ @ load r1 - pc, cpsr
#endif
.endm
.macro restore_user_regs, fast = 0, offset = 0
ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
ldr lr, [sp, #\offset + S_PC]! @ get pc
msr spsr_cxsf, r1 @ save in spsr_svc
#if defined(CONFIG_CPU_32v6K)
clrex @ clear the exclusive monitor
#elif defined (CONFIG_CPU_V6)
strex r1, r2, [sp] @ clear the exclusive monitor
#endif
.if \fast
ldmdb sp, {r1 - lr}^ @ get calling r1 - lr
.else
@ -98,6 +110,7 @@
.endm
#else /* CONFIG_THUMB2_KERNEL */
.macro svc_exit, rpsr
clrex @ clear the exclusive monitor
ldr r0, [sp, #S_SP] @ top of the stack
ldr r1, [sp, #S_PC] @ return address
tst r0, #4 @ orig stack 8-byte aligned?
@ -110,6 +123,7 @@
.endm
.macro restore_user_regs, fast = 0, offset = 0
clrex @ clear the exclusive monitor
mov r2, sp
load_user_sp_lr r2, r3, \offset + S_SP @ calling sp, lr
ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr

19
arch/arm/kernel/kprobes.c
View File

@ -22,6 +22,7 @@
#include <linux/kernel.h>
#include <linux/kprobes.h>
#include <linux/module.h>
#include <linux/stop_machine.h>
#include <linux/stringify.h>
#include <asm/traps.h>
#include <asm/cacheflush.h>
@ -83,10 +84,24 @@ void __kprobes arch_arm_kprobe(struct kprobe *p)
flush_insns(p->addr, 1);
}
/*
* The actual disarming is done here on each CPU and synchronized using
* stop_machine. This synchronization is necessary on SMP to avoid removing
* a probe between the moment the 'Undefined Instruction' exception is raised
* and the moment the exception handler reads the faulting instruction from
* memory.
*/
int __kprobes __arch_disarm_kprobe(void *p)
{
struct kprobe *kp = p;
*kp->addr = kp->opcode;
flush_insns(kp->addr, 1);
return 0;
}
void __kprobes arch_disarm_kprobe(struct kprobe *p)
{
*p->addr = p->opcode;
flush_insns(p->addr, 1);
stop_machine(__arch_disarm_kprobe, p, &cpu_online_map);
}
void __kprobes arch_remove_kprobe(struct kprobe *p)

2
arch/arm/kernel/setup.c
View File

@ -45,6 +45,7 @@
#include "compat.h"
#include "atags.h"
#include "tcm.h"
#ifndef MEM_SIZE
#define MEM_SIZE (16*1024*1024)
@ -749,6 +750,7 @@ void __init setup_arch(char **cmdline_p)
#endif
cpu_init();
tcm_init();
/*
* Set up various architecture-specific pointers

246
arch/arm/kernel/tcm.c Normal file
View File

@ -0,0 +1,246 @@
/*
* Copyright (C) 2008-2009 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* TCM memory handling for ARM systems
*
* Author: Linus Walleij <linus.walleij@stericsson.com>
* Author: Rickard Andersson <rickard.andersson@stericsson.com>
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/stddef.h>
#include <linux/ioport.h>
#include <linux/genalloc.h>
#include <linux/string.h> /* memcpy */
#include <asm/page.h> /* PAGE_SHIFT */
#include <asm/cputype.h>
#include <asm/mach/map.h>
#include <mach/memory.h>
#include "tcm.h"
/* Scream and warn about misuse */
#if !defined(ITCM_OFFSET) || !defined(ITCM_END) || \
!defined(DTCM_OFFSET) || !defined(DTCM_END)
#error "TCM support selected but offsets not defined!"
#endif
static struct gen_pool *tcm_pool;
/* TCM section definitions from the linker */
extern char __itcm_start, __sitcm_text, __eitcm_text;
extern char __dtcm_start, __sdtcm_data, __edtcm_data;
/*
* TCM memory resources
*/
static struct resource dtcm_res = {
.name = "DTCM RAM",
.start = DTCM_OFFSET,
.end = DTCM_END,
.flags = IORESOURCE_MEM
};
static struct resource itcm_res = {
.name = "ITCM RAM",
.start = ITCM_OFFSET,
.end = ITCM_END,
.flags = IORESOURCE_MEM
};
static struct map_desc dtcm_iomap[] __initdata = {
{
.virtual = DTCM_OFFSET,
.pfn = __phys_to_pfn(DTCM_OFFSET),
.length = (DTCM_END - DTCM_OFFSET + 1),
.type = MT_UNCACHED
}
};
static struct map_desc itcm_iomap[] __initdata = {
{
.virtual = ITCM_OFFSET,
.pfn = __phys_to_pfn(ITCM_OFFSET),
.length = (ITCM_END - ITCM_OFFSET + 1),
.type = MT_UNCACHED
}
};
/*
* Allocate a chunk of TCM memory
*/
void *tcm_alloc(size_t len)
{
unsigned long vaddr;
if (!tcm_pool)
return NULL;
vaddr = gen_pool_alloc(tcm_pool, len);
if (!vaddr)
return NULL;
return (void *) vaddr;
}
EXPORT_SYMBOL(tcm_alloc);
/*
* Free a chunk of TCM memory
*/
void tcm_free(void *addr, size_t len)
{
gen_pool_free(tcm_pool, (unsigned long) addr, len);
}
EXPORT_SYMBOL(tcm_free);
static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size)
{
const int tcm_sizes[16] = { 0, -1, -1, 4, 8, 16, 32, 64, 128,
256, 512, 1024, -1, -1, -1, -1 };
u32 tcm_region;
int tcm_size;
/* Read the special TCM region register c9, 0 */
if (!type)
asm("mrc p15, 0, %0, c9, c1, 0"
: "=r" (tcm_region));
else
asm("mrc p15, 0, %0, c9, c1, 1"
: "=r" (tcm_region));
tcm_size = tcm_sizes[(tcm_region >> 2) & 0x0f];
if (tcm_size < 0) {
pr_err("CPU: %sTCM of unknown size!\n",
type ? "I" : "D");
} else {
pr_info("CPU: found %sTCM %dk @ %08x, %senabled\n",
type ? "I" : "D",
tcm_size,
(tcm_region & 0xfffff000U),
(tcm_region & 1) ? "" : "not ");
}
if (tcm_size != expected_size) {
pr_crit("CPU: %sTCM was detected %dk but expected %dk!\n",
type ? "I" : "D",
tcm_size,
expected_size);
/* Adjust to the expected size? what can we do... */
}
/* Force move the TCM bank to where we want it, enable */
tcm_region = offset | (tcm_region & 0x00000ffeU) | 1;
if (!type)
asm("mcr p15, 0, %0, c9, c1, 0"
: /* No output operands */
: "r" (tcm_region));
else
asm("mcr p15, 0, %0, c9, c1, 1"
: /* No output operands */
: "r" (tcm_region));
pr_debug("CPU: moved %sTCM %dk to %08x, enabled\n",
type ? "I" : "D",
tcm_size,
(tcm_region & 0xfffff000U));
}
/*
* This initializes the TCM memory
*/
void __init tcm_init(void)
{
u32 tcm_status = read_cpuid_tcmstatus();
char *start;
char *end;
char *ram;
/* Setup DTCM if present */
if (tcm_status & (1 << 16)) {
setup_tcm_bank(0, DTCM_OFFSET,
(DTCM_END - DTCM_OFFSET + 1) >> 10);
request_resource(&iomem_resource, &dtcm_res);
iotable_init(dtcm_iomap, 1);
/* Copy data from RAM to DTCM */
start = &__sdtcm_data;
end = &__edtcm_data;
ram = &__dtcm_start;
memcpy(start, ram, (end-start));
pr_debug("CPU DTCM: copied data from %p - %p\n", start, end);
}
/* Setup ITCM if present */
if (tcm_status & 1) {
setup_tcm_bank(1, ITCM_OFFSET,
(ITCM_END - ITCM_OFFSET + 1) >> 10);
request_resource(&iomem_resource, &itcm_res);
iotable_init(itcm_iomap, 1);
/* Copy code from RAM to ITCM */
start = &__sitcm_text;
end = &__eitcm_text;
ram = &__itcm_start;
memcpy(start, ram, (end-start));
pr_debug("CPU ITCM: copied code from %p - %p\n", start, end);
}
}
/*
* This creates the TCM memory pool and has to be done later,
* during the core_initicalls, since the allocator is not yet
* up and running when the first initialization runs.
*/
static int __init setup_tcm_pool(void)
{
u32 tcm_status = read_cpuid_tcmstatus();
u32 dtcm_pool_start = (u32) &__edtcm_data;
u32 itcm_pool_start = (u32) &__eitcm_text;
int ret;
/*
* Set up malloc pool, 2^2 = 4 bytes granularity since
* the TCM is sometimes just 4 KiB. NB: pages and cache
* line alignments does not matter in TCM!
*/
tcm_pool = gen_pool_create(2, -1);
pr_debug("Setting up TCM memory pool\n");
/* Add the rest of DTCM to the TCM pool */
if (tcm_status & (1 << 16)) {
if (dtcm_pool_start < DTCM_END) {
ret = gen_pool_add(tcm_pool, dtcm_pool_start,
DTCM_END - dtcm_pool_start + 1, -1);
if (ret) {
pr_err("CPU DTCM: could not add DTCM " \
"remainder to pool!\n");
return ret;
}
pr_debug("CPU DTCM: Added %08x bytes @ %08x to " \
"the TCM memory pool\n",
DTCM_END - dtcm_pool_start + 1,
dtcm_pool_start);
}
}
/* Add the rest of ITCM to the TCM pool */
if (tcm_status & 1) {
if (itcm_pool_start < ITCM_END) {
ret = gen_pool_add(tcm_pool, itcm_pool_start,
ITCM_END - itcm_pool_start + 1, -1);
if (ret) {
pr_err("CPU ITCM: could not add ITCM " \
"remainder to pool!\n");
return ret;
}
pr_debug("CPU ITCM: Added %08x bytes @ %08x to " \
"the TCM memory pool\n",
ITCM_END - itcm_pool_start + 1,
itcm_pool_start);
}
}
return 0;
}
core_initcall(setup_tcm_pool);

17
arch/arm/kernel/tcm.h Normal file
View File

@ -0,0 +1,17 @@
/*
* Copyright (C) 2008-2009 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* TCM memory handling for ARM systems
*
* Author: Linus Walleij <linus.walleij@stericsson.com>
* Author: Rickard Andersson <rickard.andersson@stericsson.com>
*/
#ifdef CONFIG_HAVE_TCM
void __init tcm_init(void);
#else
/* No TCM support, just blank inlines to be optimized out */
inline void tcm_init(void)
{
}
#endif

57
arch/arm/kernel/vmlinux.lds.S
View File

@ -199,6 +199,63 @@ SECTIONS
}
_edata_loc = __data_loc + SIZEOF(.data);
#ifdef CONFIG_HAVE_TCM
/*
* We align everything to a page boundary so we can
* free it after init has commenced and TCM contents have
* been copied to its destination.
*/
.tcm_start : {
. = ALIGN(PAGE_SIZE);
__tcm_start = .;
__itcm_start = .;
}
/*
* Link these to the ITCM RAM
* Put VMA to the TCM address and LMA to the common RAM
* and we'll upload the contents from RAM to TCM and free
* the used RAM after that.
*/
.text_itcm ITCM_OFFSET : AT(__itcm_start)
{
__sitcm_text = .;
*(.tcm.text)
*(.tcm.rodata)
. = ALIGN(4);
__eitcm_text = .;
}
/*
* Reset the dot pointer, this is needed to create the
* relative __dtcm_start below (to be used as extern in code).
*/
. = ADDR(.tcm_start) + SIZEOF(.tcm_start) + SIZEOF(.text_itcm);
.dtcm_start : {
__dtcm_start = .;
}
/* TODO: add remainder of ITCM as well, that can be used for data! */
.data_dtcm DTCM_OFFSET : AT(__dtcm_start)
{
. = ALIGN(4);
__sdtcm_data = .;
*(.tcm.data)
. = ALIGN(4);
__edtcm_data = .;
}
/* Reset the dot pointer or the linker gets confused */
. = ADDR(.dtcm_start) + SIZEOF(.data_dtcm);
/* End marker for freeing TCM copy in linked object */
.tcm_end : AT(ADDR(.dtcm_start) + SIZEOF(.data_dtcm)){
. = ALIGN(PAGE_SIZE);
__tcm_end = .;
}
#endif
.bss : {
__bss_start = .; /* BSS */
*(.bss)

16
arch/arm/lib/copy_page.S
View File

@ -12,8 +12,9 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/cache.h>
#define COPY_COUNT (PAGE_SZ/64 PLD( -1 ))
#define COPY_COUNT (PAGE_SZ / (2 * L1_CACHE_BYTES) PLD( -1 ))
.text
.align 5
@ -26,17 +27,16 @@
ENTRY(copy_page)
stmfd sp!, {r4, lr} @ 2
PLD( pld [r1, #0] )
PLD( pld [r1, #32] )
PLD( pld [r1, #L1_CACHE_BYTES] )
mov r2, #COPY_COUNT @ 1
ldmia r1!, {r3, r4, ip, lr} @ 4+1
1: PLD( pld [r1, #64] )
PLD( pld [r1, #96] )
2: stmia r0!, {r3, r4, ip, lr} @ 4
ldmia r1!, {r3, r4, ip, lr} @ 4+1
stmia r0!, {r3, r4, ip, lr} @ 4
ldmia r1!, {r3, r4, ip, lr} @ 4+1
1: PLD( pld [r1, #2 * L1_CACHE_BYTES])
PLD( pld [r1, #3 * L1_CACHE_BYTES])
2:
.rept (2 * L1_CACHE_BYTES / 16 - 1)
stmia r0!, {r3, r4, ip, lr} @ 4
ldmia r1!, {r3, r4, ip, lr} @ 4
.endr
subs r2, r2, #1 @ 1
stmia r0!, {r3, r4, ip, lr} @ 4
ldmgtia r1!, {r3, r4, ip, lr} @ 4

10
arch/arm/mach-at91/at91cap9_devices.c
View File

@ -771,9 +771,9 @@ void __init at91_add_device_pwm(u32 mask) {}
* AC97
* -------------------------------------------------------------------- */
#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
static u64 ac97_dmamask = DMA_BIT_MASK(32);
static struct atmel_ac97_data ac97_data;
static struct ac97c_platform_data ac97_data;
static struct resource ac97_resources[] = {
[0] = {
@ -789,7 +789,7 @@ static struct resource ac97_resources[] = {
};
static struct platform_device at91cap9_ac97_device = {
.name = "ac97c",
.name = "atmel_ac97c",
.id = 1,
.dev = {
.dma_mask = &ac97_dmamask,
@ -800,7 +800,7 @@ static struct platform_device at91cap9_ac97_device = {
.num_resources = ARRAY_SIZE(ac97_resources),
};
void __init at91_add_device_ac97(struct atmel_ac97_data *data)
void __init at91_add_device_ac97(struct ac97c_platform_data *data)
{
if (!data)
return;
@ -818,7 +818,7 @@ void __init at91_add_device_ac97(struct atmel_ac97_data *data)
platform_device_register(&at91cap9_ac97_device);
}
#else
void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
#endif

104
arch/arm/mach-at91/at91sam9g45_devices.c
View File

@ -24,10 +24,58 @@
#include <mach/at91sam9g45.h>
#include <mach/at91sam9g45_matrix.h>
#include <mach/at91sam9_smc.h>
#include <mach/at_hdmac.h>
#include "generic.h"
/* --------------------------------------------------------------------
* HDMAC - AHB DMA Controller
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
static u64 hdmac_dmamask = DMA_BIT_MASK(32);
static struct at_dma_platform_data atdma_pdata = {
.nr_channels = 8,
};
static struct resource hdmac_resources[] = {
[0] = {
.start = AT91_BASE_SYS + AT91_DMA,
.end = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = AT91SAM9G45_ID_DMA,
.end = AT91SAM9G45_ID_DMA,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at_hdmac_device = {
.name = "at_hdmac",
.id = -1,
.dev = {
.dma_mask = &hdmac_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &atdma_pdata,
},
.resource = hdmac_resources,
.num_resources = ARRAY_SIZE(hdmac_resources),
};
void __init at91_add_device_hdmac(void)
{
dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
platform_device_register(&at_hdmac_device);
}
#else
void __init at91_add_device_hdmac(void) {}
#endif
/* --------------------------------------------------------------------
* USB Host (OHCI)
* -------------------------------------------------------------------- */
@ -549,6 +597,61 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
#endif
/* --------------------------------------------------------------------
* AC97
* -------------------------------------------------------------------- */
#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
static u64 ac97_dmamask = DMA_BIT_MASK(32);
static struct ac97c_platform_data ac97_data;
static struct resource ac97_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_AC97C,
.end = AT91SAM9G45_BASE_AC97C + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_AC97C,
.end = AT91SAM9G45_ID_AC97C,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_ac97_device = {
.name = "atmel_ac97c",
.id = 0,
.dev = {
.dma_mask = &ac97_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &ac97_data,
},
.resource = ac97_resources,
.num_resources = ARRAY_SIZE(ac97_resources),
};
void __init at91_add_device_ac97(struct ac97c_platform_data *data)
{
if (!data)
return;
at91_set_A_periph(AT91_PIN_PD8, 0); /* AC97FS */
at91_set_A_periph(AT91_PIN_PD9, 0); /* AC97CK */
at91_set_A_periph(AT91_PIN_PD7, 0); /* AC97TX */
at91_set_A_periph(AT91_PIN_PD6, 0); /* AC97RX */
/* reset */
if (data->reset_pin)
at91_set_gpio_output(data->reset_pin, 0);
ac97_data = *data;
platform_device_register(&at91sam9g45_ac97_device);
}
#else
void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
#endif
/* --------------------------------------------------------------------
* LCD Controller
* -------------------------------------------------------------------- */
@ -1220,6 +1323,7 @@ void __init at91_add_device_serial(void) {}
*/
static int __init at91_add_standard_devices(void)
{
at91_add_device_hdmac();
at91_add_device_rtc();
at91_add_device_rtt();
at91_add_device_watchdog();

102
arch/arm/mach-at91/at91sam9rl_devices.c
View File

@ -21,10 +21,56 @@
#include <mach/at91sam9rl.h>
#include <mach/at91sam9rl_matrix.h>
#include <mach/at91sam9_smc.h>
#include <mach/at_hdmac.h>
#include "generic.h"
/* --------------------------------------------------------------------
* HDMAC - AHB DMA Controller
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
static u64 hdmac_dmamask = DMA_BIT_MASK(32);
static struct at_dma_platform_data atdma_pdata = {
.nr_channels = 2,
};
static struct resource hdmac_resources[] = {
[0] = {
.start = AT91_BASE_SYS + AT91_DMA,
.end = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = AT91SAM9RL_ID_DMA,
.end = AT91SAM9RL_ID_DMA,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at_hdmac_device = {
.name = "at_hdmac",
.id = -1,
.dev = {
.dma_mask = &hdmac_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &atdma_pdata,
},
.resource = hdmac_resources,
.num_resources = ARRAY_SIZE(hdmac_resources),
};
void __init at91_add_device_hdmac(void)
{
dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
platform_device_register(&at_hdmac_device);
}
#else
void __init at91_add_device_hdmac(void) {}
#endif
/* --------------------------------------------------------------------
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
@ -397,6 +443,61 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
#endif
/* --------------------------------------------------------------------
* AC97
* -------------------------------------------------------------------- */
#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
static u64 ac97_dmamask = DMA_BIT_MASK(32);
static struct ac97c_platform_data ac97_data;
static struct resource ac97_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_AC97C,
.end = AT91SAM9RL_BASE_AC97C + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9RL_ID_AC97C,
.end = AT91SAM9RL_ID_AC97C,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9rl_ac97_device = {
.name = "atmel_ac97c",
.id = 0,
.dev = {
.dma_mask = &ac97_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &ac97_data,
},
.resource = ac97_resources,
.num_resources = ARRAY_SIZE(ac97_resources),
};
void __init at91_add_device_ac97(struct ac97c_platform_data *data)
{
if (!data)
return;
at91_set_A_periph(AT91_PIN_PD1, 0); /* AC97FS */
at91_set_A_periph(AT91_PIN_PD2, 0); /* AC97CK */
at91_set_A_periph(AT91_PIN_PD3, 0); /* AC97TX */
at91_set_A_periph(AT91_PIN_PD4, 0); /* AC97RX */
/* reset */
if (data->reset_pin)
at91_set_gpio_output(data->reset_pin, 0);
ac97_data = *data;
platform_device_register(&at91sam9rl_ac97_device);
}
#else
void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
#endif
/* --------------------------------------------------------------------
* LCD Controller
* -------------------------------------------------------------------- */
@ -1103,6 +1204,7 @@ void __init at91_add_device_serial(void) {}
*/
static int __init at91_add_standard_devices(void)
{
at91_add_device_hdmac();
at91_add_device_rtc();
at91_add_device_rtt();
at91_add_device_watchdog();

2
arch/arm/mach-at91/board-cap9adk.c
View File

@ -364,7 +364,7 @@ static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data;
/*
* AC97
*/
static struct atmel_ac97_data cap9adk_ac97_data = {
static struct ac97c_platform_data cap9adk_ac97_data = {
// .reset_pin = ... not connected
};

2
arch/arm/mach-at91/board-neocore926.c
View File

@ -340,7 +340,7 @@ static void __init neocore926_add_device_buttons(void) {}
/*
* AC97
*/
static struct atmel_ac97_data neocore926_ac97_data = {
static struct ac97c_platform_data neocore926_ac97_data = {
.reset_pin = AT91_PIN_PA13,
};

10
arch/arm/mach-at91/board-sam9m10g45ek.c
View File

@ -310,6 +310,14 @@ static void __init ek_add_device_buttons(void) {}
#endif
/*
* AC97
* reset_pin is not connected: NRST
*/
static struct ac97c_platform_data ek_ac97_data = {
};
/*
* LEDs ... these could all be PWM-driven, for variable brightness
*/
@ -372,6 +380,8 @@ static void __init ek_board_init(void)
at91_add_device_lcdc(&ek_lcdc_data);
/* Push Buttons */
ek_add_device_buttons();
/* AC97 */
at91_add_device_ac97(&ek_ac97_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));

10
arch/arm/mach-at91/board-sam9rlek.c
View File

@ -210,6 +210,14 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
#endif
/*
* AC97
* reset_pin is not connected: NRST
*/
static struct ac97c_platform_data ek_ac97_data = {
};
/*
* LEDs
*/
@ -299,6 +307,8 @@ static void __init ek_board_init(void)
at91_add_device_mmc(0, &ek_mmc_data);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* AC97 */
at91_add_device_ac97(&ek_ac97_data);
/* Touch Screen Controller */
at91_add_device_tsadcc();
/* LEDs */

4
arch/arm/mach-integrator/integrator_cp.c
View File

@ -19,6 +19,7 @@
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
#include <linux/amba/clcd.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <asm/clkdev.h>
@ -35,7 +36,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/mmc.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
@ -400,7 +400,7 @@ static unsigned int mmc_status(struct device *dev)
return status & 8;
}
static struct mmc_platform_data mmc_data = {
static struct mmci_platform_data mmc_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = mmc_status,
.gpio_wp = -1,

119
arch/arm/mach-iop13xx/include/mach/adma.h
View File

@ -150,6 +150,8 @@ static inline int iop_adma_get_max_xor(void)
return 16;
}
#define iop_adma_get_max_pq iop_adma_get_max_xor
static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
{
return __raw_readl(ADMA_ADAR(chan));
@ -211,7 +213,10 @@ iop_chan_xor_slot_count(size_t len, int src_cnt, int *slots_per_op)
#define IOP_ADMA_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
#define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
#define IOP_ADMA_XOR_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
#define IOP_ADMA_PQ_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
#define iop_chan_zero_sum_slot_count(l, s, o) iop_chan_xor_slot_count(l, s, o)
#define iop_chan_pq_slot_count iop_chan_xor_slot_count
#define iop_chan_pq_zero_sum_slot_count iop_chan_xor_slot_count
static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan)
@ -220,6 +225,13 @@ static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
return hw_desc->dest_addr;
}
static inline u32 iop_desc_get_qdest_addr(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan)
{
struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
return hw_desc->q_dest_addr;
}
static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan)
{
@ -319,6 +331,58 @@ iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
return 1;
}
static inline void
iop_desc_init_pq(struct iop_adma_desc_slot *desc, int src_cnt,
unsigned long flags)
{
struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
union {
u32 value;
struct iop13xx_adma_desc_ctrl field;
} u_desc_ctrl;
u_desc_ctrl.value = 0;
u_desc_ctrl.field.src_select = src_cnt - 1;
u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
u_desc_ctrl.field.pq_xfer_en = 1;
u_desc_ctrl.field.p_xfer_dis = !!(flags & DMA_PREP_PQ_DISABLE_P);
u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
hw_desc->desc_ctrl = u_desc_ctrl.value;
}
static inline int iop_desc_is_pq(struct iop_adma_desc_slot *desc)
{
struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
union {
u32 value;
struct iop13xx_adma_desc_ctrl field;
} u_desc_ctrl;
u_desc_ctrl.value = hw_desc->desc_ctrl;
return u_desc_ctrl.field.pq_xfer_en;
}
static inline void
iop_desc_init_pq_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
unsigned long flags)
{
struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
union {
u32 value;
struct iop13xx_adma_desc_ctrl field;
} u_desc_ctrl;
u_desc_ctrl.value = 0;
u_desc_ctrl.field.src_select = src_cnt - 1;
u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
u_desc_ctrl.field.zero_result = 1;
u_desc_ctrl.field.status_write_back_en = 1;
u_desc_ctrl.field.pq_xfer_en = 1;
u_desc_ctrl.field.p_xfer_dis = !!(flags & DMA_PREP_PQ_DISABLE_P);
u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
hw_desc->desc_ctrl = u_desc_ctrl.value;
}
static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan,
u32 byte_count)
@ -351,6 +415,7 @@ iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
}
}
#define iop_desc_set_pq_zero_sum_byte_count iop_desc_set_zero_sum_byte_count
static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan,
@ -361,6 +426,16 @@ static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc,
hw_desc->upper_dest_addr = 0;
}
static inline void
iop_desc_set_pq_addr(struct iop_adma_desc_slot *desc, dma_addr_t *addr)
{
struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
hw_desc->dest_addr = addr[0];
hw_desc->q_dest_addr = addr[1];
hw_desc->upper_dest_addr = 0;
}
static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc,
dma_addr_t addr)
{
@ -388,6 +463,29 @@ static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc,
} while (slot_cnt);
}
static inline void
iop_desc_set_pq_src_addr(struct iop_adma_desc_slot *desc, int src_idx,
dma_addr_t addr, unsigned char coef)
{
int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
struct iop13xx_adma_src *src;
int i = 0;
do {
iter = iop_hw_desc_slot_idx(hw_desc, i);
src = &iter->src[src_idx];
src->src_addr = addr;
src->pq_upper_src_addr = 0;
src->pq_dmlt = coef;
slot_cnt -= slots_per_op;
if (slot_cnt) {
i += slots_per_op;
addr += IOP_ADMA_PQ_MAX_BYTE_COUNT;
}
} while (slot_cnt);
}
static inline void
iop_desc_init_interrupt(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan)
@ -399,6 +497,15 @@ iop_desc_init_interrupt(struct iop_adma_desc_slot *desc,
}
#define iop_desc_set_zero_sum_src_addr iop_desc_set_xor_src_addr
#define iop_desc_set_pq_zero_sum_src_addr iop_desc_set_pq_src_addr
static inline void
iop_desc_set_pq_zero_sum_addr(struct iop_adma_desc_slot *desc, int pq_idx,
dma_addr_t *src)
{
iop_desc_set_xor_src_addr(desc, pq_idx, src[pq_idx]);
iop_desc_set_xor_src_addr(desc, pq_idx+1, src[pq_idx+1]);
}
static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc,
u32 next_desc_addr)
@ -428,18 +535,20 @@ static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc,
hw_desc->block_fill_data = val;
}
static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
static inline enum sum_check_flags
iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
{
struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
struct iop13xx_adma_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
struct iop13xx_adma_byte_count byte_count = hw_desc->byte_count_field;
enum sum_check_flags flags;
BUG_ON(!(byte_count.tx_complete && desc_ctrl.zero_result));
if (desc_ctrl.pq_xfer_en)
return byte_count.zero_result_err_q;
else
return byte_count.zero_result_err;
flags = byte_count.zero_result_err_q << SUM_CHECK_Q;
flags |= byte_count.zero_result_err << SUM_CHECK_P;
return flags;
}
static inline void iop_chan_append(struct iop_adma_chan *chan)

17
arch/arm/mach-iop13xx/setup.c
View File

@ -477,10 +477,8 @@ void __init iop13xx_platform_init(void)
plat_data = &iop13xx_adma_0_data;
dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
dma_cap_set(DMA_XOR, plat_data->cap_mask);
dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask);
dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
break;
case IOP13XX_INIT_ADMA_1:
@ -489,10 +487,8 @@ void __init iop13xx_platform_init(void)
plat_data = &iop13xx_adma_1_data;
dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
dma_cap_set(DMA_XOR, plat_data->cap_mask);
dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask);
dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
break;
case IOP13XX_INIT_ADMA_2:
@ -501,14 +497,11 @@ void __init iop13xx_platform_init(void)
plat_data = &iop13xx_adma_2_data;
dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
dma_cap_set(DMA_XOR, plat_data->cap_mask);
dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask);
dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
dma_cap_set(DMA_PQ_XOR, plat_data->cap_mask);
dma_cap_set(DMA_PQ_UPDATE, plat_data->cap_mask);
dma_cap_set(DMA_PQ_ZERO_SUM, plat_data->cap_mask);
dma_cap_set(DMA_PQ, plat_data->cap_mask);
dma_cap_set(DMA_PQ_VAL, plat_data->cap_mask);
break;
}
}

36
arch/arm/mach-pxa/Kconfig
View File

@ -21,6 +21,11 @@ config CPU_PXA930
config CPU_PXA935
bool "PXA935 (codename Tavor-P65)"
select CPU_PXA930
config CPU_PXA950
bool "PXA950 (codename Tavor-PV2)"
select CPU_PXA930
endmenu
@ -79,6 +84,12 @@ config MACH_MP900C
bool "Nec Mobilepro 900/c"
select PXA25x
config MACH_BALLOON3
bool "Balloon 3 board"
select PXA27x
select IWMMXT
select PXA_HAVE_BOARD_IRQS
config ARCH_PXA_IDP
bool "Accelent Xscale IDP"
select PXA25x
@ -371,6 +382,15 @@ config MACH_PALMTE2
Say Y here if you intend to run this kernel on a Palm Tungsten|E2
handheld computer.
config MACH_PALMTC
bool "Palm Tungsten|C"
default y
depends on ARCH_PXA_PALM
select PXA25x
help
Say Y here if you intend to run this kernel on a Palm Tungsten|C
handheld computer.
config MACH_PALMT5
bool "Palm Tungsten|T5"
default y
@ -458,6 +478,7 @@ config PXA_EZX
select PXA27x
select IWMMXT
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
config MACH_EZX_A780
bool "Motorola EZX A780"
@ -489,6 +510,21 @@ config MACH_EZX_E2
default y
depends on PXA_EZX
config MACH_XCEP
bool "Iskratel Electronics XCEP"
select PXA25x
select MTD
select MTD_PARTITIONS
select MTD_PHYSMAP
select MTD_CFI_INTELEXT
select MTD_CFI
select MTD_CHAR
select SMC91X
select PXA_SSP
help
PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
Tuned for usage in Libera instruments for particle accelerators.
endmenu
config PXA25x

4
arch/arm/mach-pxa/Makefile
View File

@ -31,6 +31,7 @@ obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
obj-$(CONFIG_MACH_BALLOON3) += balloon3.o
obj-$(CONFIG_MACH_MP900C) += mp900.o
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
@ -58,6 +59,7 @@ obj-$(CONFIG_MACH_E750) += e750.o
obj-$(CONFIG_MACH_E400) += e400.o
obj-$(CONFIG_MACH_E800) += e800.o
obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
obj-$(CONFIG_MACH_PALMTC) += palmtc.o
obj-$(CONFIG_MACH_PALMT5) += palmt5.o
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
obj-$(CONFIG_MACH_PALMLD) += palmld.o
@ -78,6 +80,8 @@ obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o
obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
obj-$(CONFIG_PXA_EZX) += ezx.o
obj-$(CONFIG_MACH_XCEP) += xcep.o
obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o
obj-$(CONFIG_MACH_STARGATE2) += stargate2.o
obj-$(CONFIG_MACH_CSB726) += csb726.o

361
arch/arm/mach-pxa/balloon3.c Normal file
View File

@ -0,0 +1,361 @@
/*
* linux/arch/arm/mach-pxa/balloon3.c
*
* Support for Balloonboard.org Balloon3 board.
*
* Author: Nick Bane, Wookey, Jonathan McDowell
* Created: June, 2006
* Copyright: Toby Churchill Ltd
* Derived from mainstone.c, by Nico Pitre
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/bitops.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/ioport.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/types.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/sizes.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
#include <mach/balloon3.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
#include <mach/irda.h>
#include <mach/ohci.h>
#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
static unsigned long balloon3_irq_enabled;
static unsigned long balloon3_features_present =
(1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) |
(1 << BALLOON3_FEATURE_AUDIO) |
(1 << BALLOON3_FEATURE_TOPPOLY);
int balloon3_has(enum balloon3_features feature)
{
return (balloon3_features_present & (1 << feature)) ? 1 : 0;
}
EXPORT_SYMBOL_GPL(balloon3_has);
int __init parse_balloon3_features(char *arg)
{
if (!arg)
return 0;
return strict_strtoul(arg, 0, &balloon3_features_present);
}
early_param("balloon3_features", parse_balloon3_features);
static void balloon3_mask_irq(unsigned int irq)
{
int balloon3_irq = (irq - BALLOON3_IRQ(0));
balloon3_irq_enabled &= ~(1 << balloon3_irq);
__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
}
static void balloon3_unmask_irq(unsigned int irq)
{
int balloon3_irq = (irq - BALLOON3_IRQ(0));
balloon3_irq_enabled |= (1 << balloon3_irq);
__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
}
static struct irq_chip balloon3_irq_chip = {
.name = "FPGA",
.ack = balloon3_mask_irq,
.mask = balloon3_mask_irq,
.unmask = balloon3_unmask_irq,
};
static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
balloon3_irq_enabled;
do {
/* clear useless edge notification */
if (desc->chip->ack)
desc->chip->ack(BALLOON3_AUX_NIRQ);
while (pending) {
irq = BALLOON3_IRQ(0) + __ffs(pending);
generic_handle_irq(irq);
pending &= pending - 1;
}
pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
balloon3_irq_enabled;
} while (pending);
}
static void __init balloon3_init_irq(void)
{
int irq;
pxa27x_init_irq();
/* setup extra Balloon3 irqs */
for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
set_irq_chip(irq, &balloon3_irq_chip);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
set_irq_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
pr_debug("%s: chained handler installed - irq %d automatically "
"enabled\n", __func__, BALLOON3_AUX_NIRQ);
}
static void balloon3_backlight_power(int on)
{
pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
}
static unsigned long balloon3_lcd_pin_config[] = {
/* LCD - 16bpp Active TFT */
GPIO58_LCD_LDD_0,
GPIO59_LCD_LDD_1,
GPIO60_LCD_LDD_2,
GPIO61_LCD_LDD_3,
GPIO62_LCD_LDD_4,
GPIO63_LCD_LDD_5,
GPIO64_LCD_LDD_6,
GPIO65_LCD_LDD_7,
GPIO66_LCD_LDD_8,
GPIO67_LCD_LDD_9,
GPIO68_LCD_LDD_10,
GPIO69_LCD_LDD_11,
GPIO70_LCD_LDD_12,
GPIO71_LCD_LDD_13,
GPIO72_LCD_LDD_14,
GPIO73_LCD_LDD_15,
GPIO74_LCD_FCLK,
GPIO75_LCD_LCLK,
GPIO76_LCD_PCLK,
GPIO77_LCD_BIAS,
GPIO99_GPIO, /* Backlight */
};
static struct pxafb_mode_info balloon3_lcd_modes[] = {
{
.pixclock = 38000,
.xres = 480,
.yres = 640,
.bpp = 16,
.hsync_len = 8,
.left_margin = 8,
.right_margin = 8,
.vsync_len = 2,
.upper_margin = 4,
.lower_margin = 5,
.sync = 0,
},
};
static struct pxafb_mach_info balloon3_pxafb_info = {
.modes = balloon3_lcd_modes,
.num_modes = ARRAY_SIZE(balloon3_lcd_modes),
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
.pxafb_backlight_power = balloon3_backlight_power,
};
static unsigned long balloon3_mmc_pin_config[] = {
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
};
static void balloon3_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data *p_d = dev->platform_data;
if ((1 << vdd) & p_d->ocr_mask) {
pr_debug("%s: on\n", __func__);
/* FIXME something to prod here? */
} else {
pr_debug("%s: off\n", __func__);
/* FIXME something to prod here? */
}
}
static struct pxamci_platform_data balloon3_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.setpower = balloon3_mci_setpower,
};
static int balloon3_udc_is_connected(void)
{
pr_debug("%s: udc connected\n", __func__);
return 1;
}
static void balloon3_udc_command(int cmd)
{
switch (cmd) {
case PXA2XX_UDC_CMD_CONNECT:
UP2OCR |= (UP2OCR_DPPUE + UP2OCR_DPPUBE);
pr_debug("%s: connect\n", __func__);
break;
case PXA2XX_UDC_CMD_DISCONNECT:
UP2OCR &= ~UP2OCR_DPPUE;
pr_debug("%s: disconnect\n", __func__);
break;
}
}
static struct pxa2xx_udc_mach_info balloon3_udc_info = {
.udc_is_connected = balloon3_udc_is_connected,
.udc_command = balloon3_udc_command,
};
static struct pxaficp_platform_data balloon3_ficp_platform_data = {
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
};
static unsigned long balloon3_ohci_pin_config[] = {
GPIO88_USBH1_PWR,
GPIO89_USBH1_PEN,
};
static struct pxaohci_platform_data balloon3_ohci_platform_data = {
.port_mode = PMM_PERPORT_MODE,
.flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
};
static unsigned long balloon3_pin_config[] __initdata = {
/* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
GPIO45_BTUART_RTS,
/* Wakeup GPIO */
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
/* NAND & IDLE LED GPIOs */
GPIO9_GPIO,
GPIO10_GPIO,
};
static struct gpio_led balloon3_gpio_leds[] = {
{
.name = "balloon3:green:idle",
.default_trigger = "heartbeat",
.gpio = BALLOON3_GPIO_LED_IDLE,
.active_low = 1,
},
{
.name = "balloon3:green:nand",
.default_trigger = "nand-disk",
.gpio = BALLOON3_GPIO_LED_NAND,
.active_low = 1,
},
};
static struct gpio_led_platform_data balloon3_gpio_leds_platform_data = {
.leds = balloon3_gpio_leds,
.num_leds = ARRAY_SIZE(balloon3_gpio_leds),
};
static struct platform_device balloon3led_device = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &balloon3_gpio_leds_platform_data,
},
};
static void __init balloon3_init(void)
{
pr_info("Initialising Balloon3\n");
/* system bus arbiter setting
* - Core_Park
* - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
*/
ARB_CNTRL = ARB_CORE_PARK | 0x234;
pxa_set_i2c_info(NULL);
if (balloon3_has(BALLOON3_FEATURE_AUDIO))
pxa_set_ac97_info(NULL);
if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) {
pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT,
"LCD Backlight Power");
gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
set_pxa_fb_info(&balloon3_pxafb_info);
}
if (balloon3_has(BALLOON3_FEATURE_MMC)) {
pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
pxa_set_mci_info(&balloon3_mci_platform_data);
}
pxa_set_ficp_info(&balloon3_ficp_platform_data);
if (balloon3_has(BALLOON3_FEATURE_OHCI)) {
pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ohci_pin_config));
pxa_set_ohci_info(&balloon3_ohci_platform_data);
}
pxa_set_udc_info(&balloon3_udc_info);
pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
platform_device_register(&balloon3led_device);
}
static struct map_desc balloon3_io_desc[] __initdata = {
{ /* CPLD/FPGA */
.virtual = BALLOON3_FPGA_VIRT,
.pfn = __phys_to_pfn(BALLOON3_FPGA_PHYS),
.length = BALLOON3_FPGA_LENGTH,
.type = MT_DEVICE,
},
};
static void __init balloon3_map_io(void)
{
pxa_map_io();
iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
}
MACHINE_START(BALLOON3, "Balloon3")
/* Maintainer: Nick Bane. */
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.map_io = balloon3_map_io,
.init_irq = balloon3_init_irq,
.timer = &pxa_timer,
.init_machine = balloon3_init,
.boot_params = PHYS_OFFSET + 0x100,
MACHINE_END

1
arch/arm/mach-pxa/clock.h
View File

@ -12,7 +12,6 @@ struct clk {
unsigned int cken;
unsigned int delay;
unsigned int enabled;
struct clk *other;
};
#define INIT_CLKREG(_clk,_devname,_conname) \

164
arch/arm/mach-pxa/cm-x270.c
View File

@ -13,13 +13,18 @@
#include <linux/sysdev.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/rtc-v3020.h>
#include <video/mbxfb.h>
#include <linux/spi/spi.h>
#include <linux/spi/libertas_spi.h>
#include <mach/pxa27x.h>
#include <mach/ohci.h>
#include <mach/mmc.h>
#include <mach/pxa2xx_spi.h>
#include "generic.h"
@ -34,6 +39,10 @@
/* MMC power enable */
#define GPIO105_MMC_POWER (105)
/* WLAN GPIOS */
#define GPIO19_WLAN_STRAP (19)
#define GPIO102_WLAN_RST (102)
static unsigned long cmx270_pin_config[] = {
/* AC'97 */
GPIO28_AC97_BITCLK,
@ -94,8 +103,8 @@ static unsigned long cmx270_pin_config[] = {
GPIO26_SSP1_RXD,
/* SSP2 */
GPIO19_SSP2_SCLK,
GPIO14_SSP2_SFRM,
GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */
GPIO14_GPIO,
GPIO87_SSP2_TXD,
GPIO88_SSP2_RXD,
@ -123,6 +132,7 @@ static unsigned long cmx270_pin_config[] = {
GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,
GPIO105_GPIO | MFP_LPM_DRIVE_HIGH, /* MMC/SD power */
GPIO53_GPIO, /* PC card reset */
GPIO102_GPIO, /* WLAN reset */
/* NAND controls */
GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
@ -131,6 +141,7 @@ static unsigned long cmx270_pin_config[] = {
/* interrupts */
GPIO10_GPIO, /* DM9000 interrupt */
GPIO83_GPIO, /* MMC card detect */
GPIO95_GPIO, /* WLAN interrupt */
};
/* V3020 RTC */
@ -271,56 +282,12 @@ static inline void cmx270_init_ohci(void) {}
#endif
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
static int cmx270_mci_init(struct device *dev,
irq_handler_t cmx270_detect_int,
void *data)
{
int err;
err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
if (err) {
dev_warn(dev, "power gpio unavailable\n");
return err;
}
gpio_direction_output(GPIO105_MMC_POWER, 0);
err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
if (err) {
gpio_free(GPIO105_MMC_POWER);
dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
" request MMC card detect IRQ\n");
}
return err;
}
static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data *p_d = dev->platform_data;
if ((1 << vdd) & p_d->ocr_mask) {
dev_dbg(dev, "power on\n");
gpio_set_value(GPIO105_MMC_POWER, 0);
} else {
gpio_set_value(GPIO105_MMC_POWER, 1);
dev_dbg(dev, "power off\n");
}
}
static void cmx270_mci_exit(struct device *dev, void *data)
{
free_irq(CMX270_MMC_IRQ, data);
gpio_free(GPIO105_MMC_POWER);
}
static struct pxamci_platform_data cmx270_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = cmx270_mci_init,
.setpower = cmx270_mci_setpower,
.exit = cmx270_mci_exit,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.gpio_card_detect = GPIO83_MMC_IRQ,
.gpio_card_ro = -1,
.gpio_power = GPIO105_MMC_POWER,
.gpio_power_invert = 1,
};
static void __init cmx270_init_mmc(void)
@ -331,6 +298,100 @@ static void __init cmx270_init_mmc(void)
static inline void cmx270_init_mmc(void) {}
#endif
#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
static struct pxa2xx_spi_master cm_x270_spi_info = {
.num_chipselect = 1,
.enable_dma = 1,
};
static struct pxa2xx_spi_chip cm_x270_libertas_chip = {
.rx_threshold = 1,
.tx_threshold = 1,
.timeout = 1000,
.gpio_cs = 14,
};
static unsigned long cm_x270_libertas_pin_config[] = {
/* SSP2 */
GPIO19_SSP2_SCLK,
GPIO14_GPIO,
GPIO87_SSP2_TXD,
GPIO88_SSP2_RXD,
};
static int cm_x270_libertas_setup(struct spi_device *spi)
{
int err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
if (err)
return err;
err = gpio_request(GPIO102_WLAN_RST, "WLAN RST");
if (err)
goto err_free_strap;
err = gpio_direction_output(GPIO102_WLAN_RST, 0);
if (err)
goto err_free_strap;
msleep(100);
err = gpio_direction_output(GPIO19_WLAN_STRAP, 1);
if (err)
goto err_free_strap;
msleep(100);
pxa2xx_mfp_config(ARRAY_AND_SIZE(cm_x270_libertas_pin_config));
gpio_set_value(GPIO102_WLAN_RST, 1);
msleep(100);
spi->bits_per_word = 16;
spi_setup(spi);
return 0;
err_free_strap:
gpio_free(GPIO19_WLAN_STRAP);
return err;
}
static int cm_x270_libertas_teardown(struct spi_device *spi)
{
gpio_set_value(GPIO102_WLAN_RST, 0);
gpio_free(GPIO102_WLAN_RST);
gpio_free(GPIO19_WLAN_STRAP);
return 0;
}
struct libertas_spi_platform_data cm_x270_libertas_pdata = {
.use_dummy_writes = 1,
.setup = cm_x270_libertas_setup,
.teardown = cm_x270_libertas_teardown,
};
static struct spi_board_info cm_x270_spi_devices[] __initdata = {
{
.modalias = "libertas_spi",
.max_speed_hz = 13000000,
.bus_num = 2,
.irq = gpio_to_irq(95),
.chip_select = 0,
.controller_data = &cm_x270_libertas_chip,
.platform_data = &cm_x270_libertas_pdata,
},
};
static void __init cmx270_init_spi(void)
{
pxa2xx_set_spi_info(2, &cm_x270_spi_info);
spi_register_board_info(ARRAY_AND_SIZE(cm_x270_spi_devices));
}
#else
static inline void cmx270_init_spi(void) {}
#endif
void __init cmx270_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
@ -343,4 +404,5 @@ void __init cmx270_init(void)
cmx270_init_mmc();
cmx270_init_ohci();
cmx270_init_2700G();
cmx270_init_spi();
}

71
arch/arm/mach-pxa/cm-x300.c
View File

@ -306,68 +306,21 @@ static void cm_x300_mci_exit(struct device *dev, void *data)
}
static struct pxamci_platform_data cm_x300_mci_platform_data = {
.detect_delay = 20,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = cm_x300_mci_init,
.exit = cm_x300_mci_exit,
.detect_delay = 20,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = cm_x300_mci_init,
.exit = cm_x300_mci_exit,
.gpio_card_detect = -1,
.gpio_card_ro = -1,
.gpio_power = -1,
};
static int cm_x300_mci2_ro(struct device *dev)
{
return gpio_get_value(GPIO85_MMC2_WP);
}
static int cm_x300_mci2_init(struct device *dev,
irq_handler_t cm_x300_detect_int,
void *data)
{
int err;
/*
* setup GPIO for CM-X300 MMC controller
*/
err = gpio_request(GPIO82_MMC2_IRQ, "mmc card detect");
if (err)
goto err_request_cd;
gpio_direction_input(GPIO82_MMC2_IRQ);
err = gpio_request(GPIO85_MMC2_WP, "mmc write protect");
if (err)
goto err_request_wp;
gpio_direction_input(GPIO85_MMC2_WP);
err = request_irq(CM_X300_MMC2_IRQ, cm_x300_detect_int,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
if (err) {
printk(KERN_ERR "%s: MMC/SD/SDIO: "
"can't request card detect IRQ\n", __func__);
goto err_request_irq;
}
return 0;
err_request_irq:
gpio_free(GPIO85_MMC2_WP);
err_request_wp:
gpio_free(GPIO82_MMC2_IRQ);
err_request_cd:
return err;
}
static void cm_x300_mci2_exit(struct device *dev, void *data)
{
free_irq(CM_X300_MMC2_IRQ, data);
gpio_free(GPIO82_MMC2_IRQ);
gpio_free(GPIO85_MMC2_WP);
}
static struct pxamci_platform_data cm_x300_mci2_platform_data = {
.detect_delay = 20,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = cm_x300_mci2_init,
.exit = cm_x300_mci2_exit,
.get_ro = cm_x300_mci2_ro,
.detect_delay = 20,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.gpio_card_detect = GPIO82_MMC2_IRQ,
.gpio_card_ro = GPIO85_MMC2_WP,
.gpio_power = -1,
};
static void __init cm_x300_init_mmc(void)

1
arch/arm/mach-pxa/colibri-pxa300.c
View File

@ -172,6 +172,7 @@ void __init colibri_pxa300_init(void)
{
colibri_pxa300_init_eth();
colibri_pxa300_init_ohci();
colibri_pxa3xx_init_nand();
colibri_pxa300_init_lcd();
colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
colibri_pxa310_init_ac97();

33
arch/arm/mach-pxa/colibri-pxa320.c
View File

@ -164,15 +164,48 @@ static inline void __init colibri_pxa320_init_ac97(void)
static inline void colibri_pxa320_init_ac97(void) {}
#endif
/*
* The following configuration is verified to work with the Toradex Orchid
* carrier board
*/
static mfp_cfg_t colibri_pxa320_uart_pin_config[] __initdata = {
/* UART 1 configuration (may be set by bootloader) */
GPIO99_UART1_CTS,
GPIO104_UART1_RTS,
GPIO97_UART1_RXD,
GPIO98_UART1_TXD,
GPIO101_UART1_DTR,
GPIO103_UART1_DSR,
GPIO100_UART1_DCD,
GPIO102_UART1_RI,
/* UART 2 configuration */
GPIO109_UART2_CTS,
GPIO112_UART2_RTS,
GPIO110_UART2_RXD,
GPIO111_UART2_TXD,
/* UART 3 configuration */
GPIO30_UART3_RXD,
GPIO31_UART3_TXD,
};
static void __init colibri_pxa320_init_uart(void)
{
pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_uart_pin_config));
}
void __init colibri_pxa320_init(void)
{
colibri_pxa320_init_eth();
colibri_pxa320_init_ohci();
colibri_pxa3xx_init_nand();
colibri_pxa320_init_lcd();
colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
colibri_pxa320_init_ac97();
colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
mfp_to_gpio(MFP_PIN_GPIO28));
colibri_pxa320_init_uart();
}
MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")

52
arch/arm/mach-pxa/colibri-pxa3xx.c
View File

@ -25,6 +25,7 @@
#include <mach/colibri.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
#include <mach/pxa3xx_nand.h>
#include "generic.h"
#include "devices.h"
@ -95,10 +96,13 @@ static void colibri_pxa3xx_mci_exit(struct device *dev, void *data)
}
static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = {
.detect_delay = 20,
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.init = colibri_pxa3xx_mci_init,
.exit = colibri_pxa3xx_mci_exit,
.detect_delay = 20,
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.init = colibri_pxa3xx_mci_init,
.exit = colibri_pxa3xx_mci_exit,
.gpio_card_detect = -1,
.gpio_card_ro = -1,
.gpio_power = -1,
};
void __init colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin)
@ -154,3 +158,43 @@ void __init colibri_pxa3xx_init_lcd(int bl_pin)
}
#endif
#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
static struct mtd_partition colibri_nand_partitions[] = {
{
.name = "bootloader",
.offset = 0,
.size = SZ_512K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = SZ_4M,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "reserved",
.offset = MTDPART_OFS_APPEND,
.size = SZ_1M,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "fs",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
static struct pxa3xx_nand_platform_data colibri_nand_info = {
.enable_arbiter = 1,
.keep_config = 1,
.parts = colibri_nand_partitions,
.nr_parts = ARRAY_SIZE(colibri_nand_partitions),
};
void __init colibri_pxa3xx_init_nand(void)
{
pxa3xx_set_nand_info(&colibri_nand_info);
}
#endif

233
arch/arm/mach-pxa/corgi.c
View File

@ -29,6 +29,7 @@
#include <linux/spi/ads7846.h>
#include <linux/spi/corgi_lcd.h>
#include <linux/mtd/sharpsl.h>
#include <linux/input/matrix_keypad.h>
#include <video/w100fb.h>
#include <asm/setup.h>
@ -104,6 +105,28 @@ static unsigned long corgi_pin_config[] __initdata = {
GPIO6_MMC_CLK,
GPIO8_MMC_CS0,
/* GPIO Matrix Keypad */
GPIO66_GPIO, /* column 0 */
GPIO67_GPIO, /* column 1 */
GPIO68_GPIO, /* column 2 */
GPIO69_GPIO, /* column 3 */
GPIO70_GPIO, /* column 4 */
GPIO71_GPIO, /* column 5 */
GPIO72_GPIO, /* column 6 */
GPIO73_GPIO, /* column 7 */
GPIO74_GPIO, /* column 8 */
GPIO75_GPIO, /* column 9 */
GPIO76_GPIO, /* column 10 */
GPIO77_GPIO, /* column 11 */
GPIO58_GPIO, /* row 0 */
GPIO59_GPIO, /* row 1 */
GPIO60_GPIO, /* row 2 */
GPIO61_GPIO, /* row 3 */
GPIO62_GPIO, /* row 4 */
GPIO63_GPIO, /* row 5 */
GPIO64_GPIO, /* row 6 */
GPIO65_GPIO, /* row 7 */
/* GPIO */
GPIO9_GPIO, /* CORGI_GPIO_nSD_DETECT */
GPIO7_GPIO, /* CORGI_GPIO_nSD_WP */
@ -267,9 +290,115 @@ static struct platform_device corgifb_device = {
/*
* Corgi Keyboard Device
*/
#define CORGI_KEY_CALENDER KEY_F1
#define CORGI_KEY_ADDRESS KEY_F2
#define CORGI_KEY_FN KEY_F3
#define CORGI_KEY_CANCEL KEY_F4
#define CORGI_KEY_OFF KEY_SUSPEND
#define CORGI_KEY_EXOK KEY_F5
#define CORGI_KEY_EXCANCEL KEY_F6
#define CORGI_KEY_EXJOGDOWN KEY_F7
#define CORGI_KEY_EXJOGUP KEY_F8
#define CORGI_KEY_JAP1 KEY_LEFTCTRL
#define CORGI_KEY_JAP2 KEY_LEFTALT
#define CORGI_KEY_MAIL KEY_F10
#define CORGI_KEY_OK KEY_F11
#define CORGI_KEY_MENU KEY_F12
static const uint32_t corgikbd_keymap[] = {
KEY(0, 1, KEY_1),
KEY(0, 2, KEY_3),
KEY(0, 3, KEY_5),
KEY(0, 4, KEY_6),
KEY(0, 5, KEY_7),
KEY(0, 6, KEY_9),
KEY(0, 7, KEY_0),
KEY(0, 8, KEY_BACKSPACE),
KEY(1, 1, KEY_2),
KEY(1, 2, KEY_4),
KEY(1, 3, KEY_R),
KEY(1, 4, KEY_Y),
KEY(1, 5, KEY_8),
KEY(1, 6, KEY_I),
KEY(1, 7, KEY_O),
KEY(1, 8, KEY_P),
KEY(2, 0, KEY_TAB),
KEY(2, 1, KEY_Q),
KEY(2, 2, KEY_E),
KEY(2, 3, KEY_T),
KEY(2, 4, KEY_G),
KEY(2, 5, KEY_U),
KEY(2, 6, KEY_J),
KEY(2, 7, KEY_K),
KEY(3, 0, CORGI_KEY_CALENDER),
KEY(3, 1, KEY_W),
KEY(3, 2, KEY_S),
KEY(3, 3, KEY_F),
KEY(3, 4, KEY_V),
KEY(3, 5, KEY_H),
KEY(3, 6, KEY_M),
KEY(3, 7, KEY_L),
KEY(3, 9, KEY_RIGHTSHIFT),
KEY(4, 0, CORGI_KEY_ADDRESS),
KEY(4, 1, KEY_A),
KEY(4, 2, KEY_D),
KEY(4, 3, KEY_C),
KEY(4, 4, KEY_B),
KEY(4, 5, KEY_N),
KEY(4, 6, KEY_DOT),
KEY(4, 8, KEY_ENTER),
KEY(4, 10, KEY_LEFTSHIFT),
KEY(5, 0, CORGI_KEY_MAIL),
KEY(5, 1, KEY_Z),
KEY(5, 2, KEY_X),
KEY(5, 3, KEY_MINUS),
KEY(5, 4, KEY_SPACE),
KEY(5, 5, KEY_COMMA),
KEY(5, 7, KEY_UP),
KEY(5, 11, CORGI_KEY_FN),
KEY(6, 0, KEY_SYSRQ),
KEY(6, 1, CORGI_KEY_JAP1),
KEY(6, 2, CORGI_KEY_JAP2),
KEY(6, 3, CORGI_KEY_CANCEL),
KEY(6, 4, CORGI_KEY_OK),
KEY(6, 5, CORGI_KEY_MENU),
KEY(6, 6, KEY_LEFT),
KEY(6, 7, KEY_DOWN),
KEY(6, 8, KEY_RIGHT),
KEY(7, 0, CORGI_KEY_OFF),
KEY(7, 1, CORGI_KEY_EXOK),
KEY(7, 2, CORGI_KEY_EXCANCEL),
KEY(7, 3, CORGI_KEY_EXJOGDOWN),
KEY(7, 4, CORGI_KEY_EXJOGUP),
};
static struct matrix_keymap_data corgikbd_keymap_data = {
.keymap = corgikbd_keymap,
.keymap_size = ARRAY_SIZE(corgikbd_keymap),
};
static const int corgikbd_row_gpios[] =
{ 58, 59, 60, 61, 62, 63, 64, 65 };
static const int corgikbd_col_gpios[] =
{ 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77 };
static struct matrix_keypad_platform_data corgikbd_pdata = {
.keymap_data = &corgikbd_keymap_data,
.row_gpios = corgikbd_row_gpios,
.col_gpios = corgikbd_col_gpios,
.num_row_gpios = ARRAY_SIZE(corgikbd_row_gpios),
.num_col_gpios = ARRAY_SIZE(corgikbd_col_gpios),
.col_scan_delay_us = 10,
.debounce_ms = 10,
.wakeup = 1,
};
static struct platform_device corgikbd_device = {
.name = "corgi-keyboard",
.name = "matrix-keypad",
.id = -1,
.dev = {
.platform_data = &corgikbd_pdata,
},
};
/*
@ -307,111 +436,20 @@ static struct platform_device corgiled_device = {
* The card detect interrupt isn't debounced so we delay it by 250ms
* to give the card a chance to fully insert/eject.
*/
static struct pxamci_platform_data corgi_mci_platform_data;
static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, void *data)
{
int err;
err = gpio_request(CORGI_GPIO_nSD_DETECT, "nSD_DETECT");
if (err)
goto err_out;
err = gpio_request(CORGI_GPIO_nSD_WP, "nSD_WP");
if (err)
goto err_free_1;
err = gpio_request(CORGI_GPIO_SD_PWR, "SD_PWR");
if (err)
goto err_free_2;
gpio_direction_input(CORGI_GPIO_nSD_DETECT);
gpio_direction_input(CORGI_GPIO_nSD_WP);
gpio_direction_output(CORGI_GPIO_SD_PWR, 0);
corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING,
"MMC card detect", data);
if (err) {
pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
__func__);
goto err_free_3;
}
return 0;
err_free_3:
gpio_free(CORGI_GPIO_SD_PWR);
err_free_2:
gpio_free(CORGI_GPIO_nSD_WP);
err_free_1:
gpio_free(CORGI_GPIO_nSD_DETECT);
err_out:
return err;
}
static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
gpio_set_value(CORGI_GPIO_SD_PWR, ((1 << vdd) & p_d->ocr_mask));
}
static int corgi_mci_get_ro(struct device *dev)
{
return gpio_get_value(CORGI_GPIO_nSD_WP);
}
static void corgi_mci_exit(struct device *dev, void *data)
{
free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data);
gpio_free(CORGI_GPIO_SD_PWR);
gpio_free(CORGI_GPIO_nSD_WP);
gpio_free(CORGI_GPIO_nSD_DETECT);
}
static struct pxamci_platform_data corgi_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = corgi_mci_init,
.get_ro = corgi_mci_get_ro,
.setpower = corgi_mci_setpower,
.exit = corgi_mci_exit,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.gpio_card_detect = -1,
.gpio_card_ro = CORGI_GPIO_nSD_WP,
.gpio_power = CORGI_GPIO_SD_PWR,
};
/*
* Irda
*/
static void corgi_irda_transceiver_mode(struct device *dev, int mode)
{
gpio_set_value(CORGI_GPIO_IR_ON, mode & IR_OFF);
pxa2xx_transceiver_mode(dev, mode);
}
static int corgi_irda_startup(struct device *dev)
{
int err;
err = gpio_request(CORGI_GPIO_IR_ON, "IR_ON");
if (err)
return err;
gpio_direction_output(CORGI_GPIO_IR_ON, 1);
return 0;
}
static void corgi_irda_shutdown(struct device *dev)
{
gpio_free(CORGI_GPIO_IR_ON);
}
static struct pxaficp_platform_data corgi_ficp_platform_data = {
.gpio_pwdown = CORGI_GPIO_IR_ON,
.transceiver_cap = IR_SIRMODE | IR_OFF,
.transceiver_mode = corgi_irda_transceiver_mode,
.startup = corgi_irda_startup,
.shutdown = corgi_irda_shutdown,
};
@ -636,6 +674,7 @@ static void __init corgi_init(void)
corgi_init_spi();
pxa_set_udc_info(&udc_info);
corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
pxa_set_mci_info(&corgi_mci_platform_data);
pxa_set_ficp_info(&corgi_ficp_platform_data);
pxa_set_i2c_info(NULL);

54
arch/arm/mach-pxa/csb726.c
View File

@ -130,61 +130,17 @@ static struct pxamci_platform_data csb726_mci_data;
static int csb726_mci_init(struct device *dev,
irq_handler_t detect, void *data)
{
int err;
csb726_mci_data.detect_delay = msecs_to_jiffies(500);
err = gpio_request(CSB726_GPIO_MMC_DETECT, "MMC detect");
if (err)
goto err_det_req;
err = gpio_direction_input(CSB726_GPIO_MMC_DETECT);
if (err)
goto err_det_dir;
err = gpio_request(CSB726_GPIO_MMC_RO, "MMC ro");
if (err)
goto err_ro_req;
err = gpio_direction_input(CSB726_GPIO_MMC_RO);
if (err)
goto err_ro_dir;
err = request_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), detect,
IRQF_DISABLED, "MMC card detect", data);
if (err)
goto err_irq;
return 0;
err_irq:
err_ro_dir:
gpio_free(CSB726_GPIO_MMC_RO);
err_ro_req:
err_det_dir:
gpio_free(CSB726_GPIO_MMC_DETECT);
err_det_req:
return err;
}
static int csb726_mci_get_ro(struct device *dev)
{
return gpio_get_value(CSB726_GPIO_MMC_RO);
}
static void csb726_mci_exit(struct device *dev, void *data)
{
free_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), data);
gpio_free(CSB726_GPIO_MMC_RO);
gpio_free(CSB726_GPIO_MMC_DETECT);
}
static struct pxamci_platform_data csb726_mci = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = csb726_mci_init,
.get_ro = csb726_mci_get_ro,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = csb726_mci_init,
/* FIXME setpower */
.exit = csb726_mci_exit,
.gpio_card_detect = CSB726_GPIO_MMC_DETECT,
.gpio_card_ro = CSB726_GPIO_MMC_RO,
.gpio_power = -1,
};
static struct pxaohci_platform_data csb726_ohci_platform_data = {

27
arch/arm/mach-pxa/devices.c
View File

@ -935,6 +935,33 @@ void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
{
pxa_register_device(&pxa3xx_device_nand, info);
}
static struct resource pxa3xx_resources_gcu[] = {
{
.start = 0x54000000,
.end = 0x54000fff,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_GCU,
.end = IRQ_GCU,
.flags = IORESOURCE_IRQ,
},
};
static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
struct platform_device pxa3xx_device_gcu = {
.name = "pxa3xx-gcu",
.id = -1,
.num_resources = ARRAY_SIZE(pxa3xx_resources_gcu),
.resource = pxa3xx_resources_gcu,
.dev = {
.dma_mask = &pxa3xx_gcu_dmamask,
.coherent_dma_mask = 0xffffffff,
},
};
#endif /* CONFIG_PXA3xx */
/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.

2
arch/arm/mach-pxa/devices.h
View File

@ -35,4 +35,6 @@ extern struct platform_device pxa27x_device_pwm1;
extern struct platform_device pxa3xx_device_nand;
extern struct platform_device pxa3xx_device_i2c_power;
extern struct platform_device pxa3xx_device_gcu;
void __init pxa_register_device(struct platform_device *dev, void *data);

1
arch/arm/mach-pxa/e740.c
View File

@ -199,7 +199,6 @@ static void __init e740_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_udc_info(&e7xx_udc_mach_info);
pxa_set_ac97_info(NULL);
e7xx_irda_init();
pxa_set_ficp_info(&e7xx_ficp_platform_data);
}

1
arch/arm/mach-pxa/e750.c
View File

@ -200,7 +200,6 @@ static void __init e750_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_udc_info(&e7xx_udc_mach_info);
pxa_set_ac97_info(NULL);
e7xx_irda_init();
pxa_set_ficp_info(&e7xx_ficp_platform_data);
}

45
arch/arm/mach-pxa/em-x270.c
View File

@ -646,13 +646,16 @@ static int em_x270_mci_get_ro(struct device *dev)
}
static struct pxamci_platform_data em_x270_mci_platform_data = {
.ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
MMC_VDD_30_31|MMC_VDD_31_32,
.init = em_x270_mci_init,
.setpower = em_x270_mci_setpower,
.exit = em_x270_mci_exit,
.ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
MMC_VDD_30_31|MMC_VDD_31_32,
.init = em_x270_mci_init,
.setpower = em_x270_mci_setpower,
.exit = em_x270_mci_exit,
.gpio_card_detect = -1,
.gpio_card_ro = -1,
.gpio_power = -1,
};
static void __init em_x270_init_mmc(void)
@ -1022,22 +1025,32 @@ static int em_x270_sensor_power(struct device *dev, int on)
return 0;
}
static struct soc_camera_link iclink = {
.bus_id = 0,
.power = em_x270_sensor_power,
};
static struct i2c_board_info em_x270_i2c_cam_info[] = {
{
I2C_BOARD_INFO("mt9m111", 0x48),
},
};
static struct soc_camera_link iclink = {
.bus_id = 0,
.power = em_x270_sensor_power,
.board_info = &em_x270_i2c_cam_info[0],
.i2c_adapter_id = 0,
.module_name = "mt9m111",
};
static struct platform_device em_x270_camera = {
.name = "soc-camera-pdrv",
.id = -1,
.dev = {
.platform_data = &iclink,
},
};
static void __init em_x270_init_camera(void)
{
i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
pxa_set_camera_info(&em_x270_camera_platform_data);
platform_device_register(&em_x270_camera);
}
#else
static inline void em_x270_init_camera(void) {}
@ -1103,6 +1116,7 @@ REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio");
REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
REGULATOR_CONSUMER(ldo19, &em_x270_gprs_userspace_consumer.dev, "vcc gprs");
REGULATOR_CONSUMER(buck2, NULL, "vcc_core");
#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \
static struct regulator_init_data _ldo##_data = { \
@ -1125,6 +1139,7 @@ REGULATOR_INIT(ldo10, 2000000, 3200000,
REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE);
REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
REGULATOR_INIT(buck2, 1000000, 1650000, REGULATOR_CHANGE_VOLTAGE);
struct led_info em_x270_led_info = {
.name = "em-x270:orange",
@ -1194,6 +1209,8 @@ struct da903x_subdev_info em_x270_da9030_subdevs[] = {
DA9030_LDO(12),
DA9030_LDO(19),
DA9030_SUBDEV(regulator, BUCK2, &buck2_data),
DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info),
@ -1245,7 +1262,6 @@ static void __init em_x270_init_i2c(void)
static void __init em_x270_module_init(void)
{
pr_info("%s\n", __func__);
pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
mmc_cd = GPIO13_MMC_CD;
@ -1257,7 +1273,6 @@ static void __init em_x270_module_init(void)
static void __init em_x270_exeda_init(void)
{
pr_info("%s\n", __func__);
pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
mmc_cd = GPIO114_MMC_CD;

39
arch/arm/mach-pxa/eseries.c
View File

@ -47,44 +47,9 @@ struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
.gpio_pullup_inverted = 1
};
static void e7xx_irda_transceiver_mode(struct device *dev, int mode)
{
if (mode & IR_OFF) {
gpio_set_value(GPIO_E7XX_IR_OFF, 1);
pxa2xx_transceiver_mode(dev, mode);
} else {
pxa2xx_transceiver_mode(dev, mode);
gpio_set_value(GPIO_E7XX_IR_OFF, 0);
}
}
int e7xx_irda_init(void)
{
int ret;
ret = gpio_request(GPIO_E7XX_IR_OFF, "IrDA power");
if (ret)
goto out;
ret = gpio_direction_output(GPIO_E7XX_IR_OFF, 0);
if (ret)
goto out;
e7xx_irda_transceiver_mode(NULL, IR_SIRMODE | IR_OFF);
out:
return ret;
}
static void e7xx_irda_shutdown(struct device *dev)
{
e7xx_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
gpio_free(GPIO_E7XX_IR_OFF);
}
struct pxaficp_platform_data e7xx_ficp_platform_data = {
.transceiver_cap = IR_SIRMODE | IR_OFF,
.transceiver_mode = e7xx_irda_transceiver_mode,
.shutdown = e7xx_irda_shutdown,
.gpio_pwdown = GPIO_E7XX_IR_OFF,
.transceiver_cap = IR_SIRMODE | IR_OFF,
};
int eseries_tmio_enable(struct platform_device *dev)

5
arch/arm/mach-pxa/gumstix.c
View File

@ -88,7 +88,10 @@ static struct platform_device *devices[] __initdata = {
#ifdef CONFIG_MMC_PXA
static struct pxamci_platform_data gumstix_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.gpio_card_detect = -1,
.gpio_card_ro = -1,
.gpio_power = -1,
};
static void __init gumstix_mmc_init(void)

65
arch/arm/mach-pxa/hx4700.c
View File

@ -45,6 +45,7 @@
#include <mach/irda.h>
#include <mach/pxa2xx_spi.h>
#include <video/platform_lcd.h>
#include <video/w100fb.h>
#include "devices.h"
@ -174,14 +175,9 @@ static int hx4700_gpio_request(struct gpio_ress *gpios, int size)
* IRDA
*/
static void irda_transceiver_mode(struct device *dev, int mode)
{
gpio_set_value(GPIO105_HX4700_nIR_ON, mode & IR_OFF);
}
static struct pxaficp_platform_data ficp_info = {
.transceiver_cap = IR_SIRMODE | IR_OFF,
.transceiver_mode = irda_transceiver_mode,
.gpio_pwdown = GPIO105_HX4700_nIR_ON,
.transceiver_cap = IR_SIRMODE | IR_OFF,
};
/*
@ -368,8 +364,6 @@ static struct platform_device egpio = {
* LCD - Sony display connected to ATI Imageon w3220
*/
static int lcd_power;
static void sony_lcd_init(void)
{
gpio_set_value(GPIO84_HX4700_LCD_SQN, 1);
@ -410,35 +404,6 @@ static void sony_lcd_off(void)
gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
}
static int hx4700_lcd_set_power(struct lcd_device *ldev, int level)
{
switch (level) {
case FB_BLANK_UNBLANK:
sony_lcd_init();
break;
case FB_BLANK_NORMAL:
case FB_BLANK_VSYNC_SUSPEND:
case FB_BLANK_HSYNC_SUSPEND:
case FB_BLANK_POWERDOWN:
sony_lcd_off();
break;
}
lcd_power = level;
return 0;
}
static int hx4700_lcd_get_power(struct lcd_device *lm)
{
return lcd_power;
}
static struct lcd_ops hx4700_lcd_ops = {
.get_power = hx4700_lcd_get_power,
.set_power = hx4700_lcd_set_power,
};
static struct lcd_device *hx4700_lcd_device;
#ifdef CONFIG_PM
static void w3220_lcd_suspend(struct w100fb_par *wfb)
{
@ -573,6 +538,27 @@ static struct platform_device w3220 = {
.resource = w3220_resources,
};
static void hx4700_lcd_set_power(struct plat_lcd_data *pd, unsigned int power)
{
if (power)
sony_lcd_init();
else
sony_lcd_off();
}
static struct plat_lcd_data hx4700_lcd_data = {
.set_power = hx4700_lcd_set_power,
};
static struct platform_device hx4700_lcd = {
.name = "platform-lcd",
.id = -1,
.dev = {
.platform_data = &hx4700_lcd_data,
.parent = &w3220.dev,
},
};
/*
* Backlight
*/
@ -872,9 +858,6 @@ static void __init hx4700_init(void)
pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
hx4700_lcd_device = lcd_device_register("w100fb", NULL,
(void *)&w3220_info, &hx4700_lcd_ops);
gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
mdelay(10);
gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);

5
arch/arm/mach-pxa/idp.c
View File

@ -168,7 +168,10 @@ static struct pxafb_mach_info sharp_lm8v31 = {
};
static struct pxamci_platform_data idp_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.gpio_card_detect = -1,
.gpio_card_ro = -1,
.gpio_power = -1,
};
static void __init idp_init(void)

3
arch/arm/mach-pxa/imote2.c
View File

@ -389,6 +389,9 @@ static int imote2_mci_get_ro(struct device *dev)
static struct pxamci_platform_data imote2_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
.get_ro = imote2_mci_get_ro,
.gpio_card_detect = -1,
.gpio_card_ro = -1,
.gpio_power = -1,
};
static struct mtd_partition imote2flash_partitions[] = {

134
arch/arm/mach-pxa/include/mach/balloon3.h Normal file
View File

@ -0,0 +1,134 @@
/*
* linux/include/asm-arm/arch-pxa/balloon3.h
*
* Authors: Nick Bane and Wookey
* Created: Oct, 2005
* Copyright: Toby Churchill Ltd
* Cribbed from mainstone.c, by Nicholas Pitre
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef ASM_ARCH_BALLOON3_H
#define ASM_ARCH_BALLOON3_H
enum balloon3_features {
BALLOON3_FEATURE_OHCI,
BALLOON3_FEATURE_MMC,
BALLOON3_FEATURE_CF,
BALLOON3_FEATURE_AUDIO,
BALLOON3_FEATURE_TOPPOLY,
};
#define BALLOON3_FPGA_PHYS PXA_CS4_PHYS
#define BALLOON3_FPGA_VIRT (0xf1000000) /* as per balloon2 */
#define BALLOON3_FPGA_LENGTH 0x01000000
/* FPGA/CPLD registers */
#define BALLOON3_PCMCIA0_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
/* fixme - same for now */
#define BALLOON3_PCMCIA1_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
#define BALLOON3_NANDIO_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000)
/* fpga/cpld interrupt control register */
#define BALLOON3_INT_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e0000C)
#define BALLOON3_NANDIO_CTL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010)
#define BALLOON3_NANDIO_CTL_REG (BALLOON3_FPGA_VIRT + 0x00e00014)
#define BALLOON3_VERSION_REG (BALLOON3_FPGA_VIRT + 0x00e0001c)
#define BALLOON3_SAMOSA_ADDR_REG (BALLOON3_FPGA_VIRT + 0x00c00000)
#define BALLOON3_SAMOSA_DATA_REG (BALLOON3_FPGA_VIRT + 0x00c00004)
#define BALLOON3_SAMOSA_STATUS_REG (BALLOON3_FPGA_VIRT + 0x00c0001c)
/* GPIOs for irqs */
#define BALLOON3_GPIO_AUX_NIRQ (94)
#define BALLOON3_GPIO_CODEC_IRQ (95)
/* Timer and Idle LED locations */
#define BALLOON3_GPIO_LED_NAND (9)
#define BALLOON3_GPIO_LED_IDLE (10)
/* backlight control */
#define BALLOON3_GPIO_RUN_BACKLIGHT (99)
#define BALLOON3_GPIO_S0_CD (105)
/* FPGA Interrupt Mask/Acknowledge Register */
#define BALLOON3_INT_S0_IRQ (1 << 0) /* PCMCIA 0 IRQ */
#define BALLOON3_INT_S0_STSCHG (1 << 1) /* PCMCIA 0 status changed */
/* CF Status Register */
#define BALLOON3_PCMCIA_nIRQ (1 << 0) /* IRQ / ready signal */
#define BALLOON3_PCMCIA_nSTSCHG_BVD1 (1 << 1)
/* VDD sense / card status changed */
/* CF control register (write) */
#define BALLOON3_PCMCIA_RESET (1 << 0) /* Card reset signal */
#define BALLOON3_PCMCIA_ENABLE (1 << 1)
#define BALLOON3_PCMCIA_ADD_ENABLE (1 << 2)
/* CPLD (and FPGA) interface definitions */
#define CPLD_LCD0_DATA_SET 0x00
#define CPLD_LCD0_DATA_CLR 0x10
#define CPLD_LCD0_COMMAND_SET 0x01
#define CPLD_LCD0_COMMAND_CLR 0x11
#define CPLD_LCD1_DATA_SET 0x02
#define CPLD_LCD1_DATA_CLR 0x12
#define CPLD_LCD1_COMMAND_SET 0x03
#define CPLD_LCD1_COMMAND_CLR 0x13
#define CPLD_MISC_SET 0x07
#define CPLD_MISC_CLR 0x17
#define CPLD_MISC_LOON_NRESET_BIT 0
#define CPLD_MISC_LOON_UNSUSP_BIT 1
#define CPLD_MISC_RUN_5V_BIT 2
#define CPLD_MISC_CHG_D0_BIT 3
#define CPLD_MISC_CHG_D1_BIT 4
#define CPLD_MISC_DAC_NCS_BIT 5
#define CPLD_LCD_SET 0x08
#define CPLD_LCD_CLR 0x18
#define CPLD_LCD_BACKLIGHT_EN_0_BIT 0
#define CPLD_LCD_BACKLIGHT_EN_1_BIT 1
#define CPLD_LCD_LED_RED_BIT 4
#define CPLD_LCD_LED_GREEN_BIT 5
#define CPLD_LCD_NRESET_BIT 7
#define CPLD_LCD_RO_SET 0x09
#define CPLD_LCD_RO_CLR 0x19
#define CPLD_LCD_RO_LCD0_nWAIT_BIT 0
#define CPLD_LCD_RO_LCD1_nWAIT_BIT 1
#define CPLD_SERIAL_SET 0x0a
#define CPLD_SERIAL_CLR 0x1a
#define CPLD_SERIAL_GSM_RI_BIT 0
#define CPLD_SERIAL_GSM_CTS_BIT 1
#define CPLD_SERIAL_GSM_DTR_BIT 2
#define CPLD_SERIAL_LPR_CTS_BIT 3
#define CPLD_SERIAL_TC232_CTS_BIT 4
#define CPLD_SERIAL_TC232_DSR_BIT 5
#define CPLD_SROUTING_SET 0x0b
#define CPLD_SROUTING_CLR 0x1b
#define CPLD_SROUTING_MSP430_LPR 0
#define CPLD_SROUTING_MSP430_TC232 1
#define CPLD_SROUTING_MSP430_GSM 2
#define CPLD_SROUTING_LOON_LPR (0 << 4)
#define CPLD_SROUTING_LOON_TC232 (1 << 4)
#define CPLD_SROUTING_LOON_GSM (2 << 4)
#define CPLD_AROUTING_SET 0x0c
#define CPLD_AROUTING_CLR 0x1c
#define CPLD_AROUTING_MIC2PHONE_BIT 0
#define CPLD_AROUTING_PHONE2INT_BIT 1
#define CPLD_AROUTING_PHONE2EXT_BIT 2
#define CPLD_AROUTING_LOONL2INT_BIT 3
#define CPLD_AROUTING_LOONL2EXT_BIT 4
#define CPLD_AROUTING_LOONR2PHONE_BIT 5
#define CPLD_AROUTING_LOONR2INT_BIT 6
#define CPLD_AROUTING_LOONR2EXT_BIT 7
extern int balloon3_has(enum balloon3_features feature);
#endif

6
arch/arm/mach-pxa/include/mach/colibri.h
View File

@ -23,6 +23,12 @@ static inline void colibri_pxa3xx_init_lcd(int bl_pin) {}
extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
#endif
#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
extern void colibri_pxa3xx_init_nand(void);
#else
static inline void colibri_pxa3xx_init_nand(void) {}
#endif
/* physical memory regions */
#define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */

27
arch/arm/mach-pxa/include/mach/entry-macro.S
View File

@ -24,34 +24,27 @@
mov \tmp, \tmp, lsr #13
and \tmp, \tmp, #0x7 @ Core G
cmp \tmp, #1
bhi 1004f
bhi 1002f
@ Core Generation 1 (PXA25x)
mov \base, #io_p2v(0x40000000) @ IIR Ctl = 0x40d00000
add \base, \base, #0x00d00000
ldr \irqstat, [\base, #0] @ ICIP
ldr \irqnr, [\base, #4] @ ICMR
b 1002f
1004:
mrc p6, 0, \irqstat, c6, c0, 0 @ ICIP2
mrc p6, 0, \irqnr, c7, c0, 0 @ ICMR2
ands \irqnr, \irqstat, \irqnr
beq 1003f
rsb \irqstat, \irqnr, #0
and \irqstat, \irqstat, \irqnr
clz \irqnr, \irqstat
rsb \irqnr, \irqnr, #31
add \irqnr, \irqnr, #(32 + PXA_IRQ(0))
b 1001f
1003:
mrc p6, 0, \irqstat, c0, c0, 0 @ ICIP
mrc p6, 0, \irqnr, c1, c0, 0 @ ICMR
1002:
ands \irqnr, \irqstat, \irqnr
beq 1001f
rsb \irqstat, \irqnr, #0
and \irqstat, \irqstat, \irqnr
clz \irqnr, \irqstat
rsb \irqnr, \irqnr, #(31 + PXA_IRQ(0))
b 1001f
1002:
@ Core Generation 2 (PXA27x) or Core Generation 3 (PXA3xx)
mrc p6, 0, \irqstat, c5, c0, 0 @ ICHP
tst \irqstat, #0x80000000
beq 1001f
bic \irqstat, \irqstat, #0x80000000
mov \irqnr, \irqstat, lsr #16
1001:
.endm

17
arch/arm/mach-pxa/include/mach/hardware.h
View File

@ -197,6 +197,16 @@
#define __cpu_is_pxa935(id) (0)
#endif
#ifdef CONFIG_CPU_PXA950
#define __cpu_is_pxa950(id) \
({ \
unsigned int _id = (id) >> 4 & 0xfff; \
id == 0x697; \
})
#else
#define __cpu_is_pxa950(id) (0)
#endif
#define cpu_is_pxa210() \
({ \
__cpu_is_pxa210(read_cpuid_id()); \
@ -249,6 +259,13 @@
__cpu_is_pxa935(id); \
})
#define cpu_is_pxa950() \
({ \
unsigned int id = read_cpuid(CPUID_ID); \
__cpu_is_pxa950(id); \
})
/*
* CPUID Core Generation Bit
* <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x

2
arch/arm/mach-pxa/include/mach/irda.h
View File

@ -12,6 +12,8 @@ struct pxaficp_platform_data {
void (*transceiver_mode)(struct device *dev, int mode);
int (*startup)(struct device *dev);
void (*shutdown)(struct device *dev);
int gpio_pwdown; /* powerdown GPIO for the IrDA chip */
bool gpio_pwdown_inverted; /* gpio_pwdown is inverted */
};
extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);

42
arch/arm/mach-pxa/include/mach/irqs.h
View File

@ -68,9 +68,10 @@
#ifdef CONFIG_PXA3xx
#define IRQ_SSP4 PXA_IRQ(13) /* SSP4 service request */
#define IRQ_CIR PXA_IRQ(34) /* Consumer IR */
#define IRQ_COMM_WDT PXA_IRQ(35) /* Comm WDT interrupt */
#define IRQ_TSI PXA_IRQ(36) /* Touch Screen Interface (PXA320) */
#define IRQ_USIM2 PXA_IRQ(38) /* USIM2 Controller */
#define IRQ_GRPHICS PXA_IRQ(39) /* Graphics Controller */
#define IRQ_GCU PXA_IRQ(39) /* Graphics Controller */
#define IRQ_MMC2 PXA_IRQ(41) /* MMC2 Controller */
#define IRQ_1WIRE PXA_IRQ(44) /* 1-Wire Controller */
#define IRQ_NAND PXA_IRQ(45) /* NAND Controller */
@ -81,8 +82,31 @@
#define IRQ_MMC3 PXA_IRQ(55) /* MMC3 Controller (PXA310) */
#endif
#define PXA_GPIO_IRQ_BASE PXA_IRQ(64)
#define PXA_GPIO_IRQ_NUM (128)
#ifdef CONFIG_CPU_PXA935
#define IRQ_U2O PXA_IRQ(64) /* USB OTG 2.0 Controller (PXA935) */
#define IRQ_U2H PXA_IRQ(65) /* USB Host 2.0 Controller (PXA935) */
#define IRQ_MMC3_PXA935 PXA_IRQ(72) /* MMC3 Controller (PXA935) */
#define IRQ_MMC4_PXA935 PXA_IRQ(73) /* MMC4 Controller (PXA935) */
#define IRQ_MMC5_PXA935 PXA_IRQ(74) /* MMC5 Controller (PXA935) */
#define IRQ_U2P PXA_IRQ(93) /* USB PHY D+/D- Lines (PXA935) */
#endif
#ifdef CONFIG_CPU_PXA930
#define IRQ_ENHROT PXA_IRQ(37) /* Enhanced Rotary (PXA930) */
#define IRQ_ACIPC0 PXA_IRQ(5)
#define IRQ_ACIPC1 PXA_IRQ(40)
#define IRQ_ACIPC2 PXA_IRQ(19)
#define IRQ_TRKBALL PXA_IRQ(43) /* Track Ball */
#endif
#ifdef CONFIG_CPU_PXA950
#define IRQ_GC500 PXA_IRQ(70) /* Graphics Controller (PXA950) */
#endif
#define PXA_GPIO_IRQ_BASE PXA_IRQ(96)
#define PXA_GPIO_IRQ_NUM (192)
#define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x))
#define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
@ -105,6 +129,8 @@
#define IRQ_BOARD_END (IRQ_BOARD_START + 70)
#elif defined(CONFIG_MACH_ZYLONITE)
#define IRQ_BOARD_END (IRQ_BOARD_START + 32)
#elif defined(CONFIG_PXA_EZX)
#define IRQ_BOARD_END (IRQ_BOARD_START + 23)
#else
#define IRQ_BOARD_END (IRQ_BOARD_START + 16)
#endif
@ -237,6 +263,16 @@
#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14)
#define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15)
/* Balloon3 Interrupts */
#define BALLOON3_IRQ(x) (IRQ_BOARD_START + (x))
#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0)
#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1)
#define BALLOON3_AUX_NIRQ IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
#define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
#define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD)
/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
#define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0)
#define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1)

301
arch/arm/mach-pxa/include/mach/mfp.h
View File

@ -16,305 +16,6 @@
#ifndef __ASM_ARCH_MFP_H
#define __ASM_ARCH_MFP_H
#define mfp_to_gpio(m) ((m) % 128)
/* list of all the configurable MFP pins */
enum {
MFP_PIN_INVALID = -1,
MFP_PIN_GPIO0 = 0,
MFP_PIN_GPIO1,
MFP_PIN_GPIO2,
MFP_PIN_GPIO3,
MFP_PIN_GPIO4,
MFP_PIN_GPIO5,
MFP_PIN_GPIO6,
MFP_PIN_GPIO7,
MFP_PIN_GPIO8,
MFP_PIN_GPIO9,
MFP_PIN_GPIO10,
MFP_PIN_GPIO11,
MFP_PIN_GPIO12,
MFP_PIN_GPIO13,
MFP_PIN_GPIO14,
MFP_PIN_GPIO15,
MFP_PIN_GPIO16,
MFP_PIN_GPIO17,
MFP_PIN_GPIO18,
MFP_PIN_GPIO19,
MFP_PIN_GPIO20,
MFP_PIN_GPIO21,
MFP_PIN_GPIO22,
MFP_PIN_GPIO23,
MFP_PIN_GPIO24,
MFP_PIN_GPIO25,
MFP_PIN_GPIO26,
MFP_PIN_GPIO27,
MFP_PIN_GPIO28,
MFP_PIN_GPIO29,
MFP_PIN_GPIO30,
MFP_PIN_GPIO31,
MFP_PIN_GPIO32,
MFP_PIN_GPIO33,
MFP_PIN_GPIO34,
MFP_PIN_GPIO35,
MFP_PIN_GPIO36,
MFP_PIN_GPIO37,
MFP_PIN_GPIO38,
MFP_PIN_GPIO39,
MFP_PIN_GPIO40,
MFP_PIN_GPIO41,
MFP_PIN_GPIO42,
MFP_PIN_GPIO43,
MFP_PIN_GPIO44,
MFP_PIN_GPIO45,
MFP_PIN_GPIO46,
MFP_PIN_GPIO47,
MFP_PIN_GPIO48,
MFP_PIN_GPIO49,
MFP_PIN_GPIO50,
MFP_PIN_GPIO51,
MFP_PIN_GPIO52,
MFP_PIN_GPIO53,
MFP_PIN_GPIO54,
MFP_PIN_GPIO55,
MFP_PIN_GPIO56,
MFP_PIN_GPIO57,
MFP_PIN_GPIO58,
MFP_PIN_GPIO59,
MFP_PIN_GPIO60,
MFP_PIN_GPIO61,
MFP_PIN_GPIO62,
MFP_PIN_GPIO63,
MFP_PIN_GPIO64,
MFP_PIN_GPIO65,
MFP_PIN_GPIO66,
MFP_PIN_GPIO67,
MFP_PIN_GPIO68,
MFP_PIN_GPIO69,
MFP_PIN_GPIO70,
MFP_PIN_GPIO71,
MFP_PIN_GPIO72,
MFP_PIN_GPIO73,
MFP_PIN_GPIO74,
MFP_PIN_GPIO75,
MFP_PIN_GPIO76,
MFP_PIN_GPIO77,
MFP_PIN_GPIO78,
MFP_PIN_GPIO79,
MFP_PIN_GPIO80,
MFP_PIN_GPIO81,
MFP_PIN_GPIO82,
MFP_PIN_GPIO83,
MFP_PIN_GPIO84,
MFP_PIN_GPIO85,
MFP_PIN_GPIO86,
MFP_PIN_GPIO87,
MFP_PIN_GPIO88,
MFP_PIN_GPIO89,
MFP_PIN_GPIO90,
MFP_PIN_GPIO91,
MFP_PIN_GPIO92,
MFP_PIN_GPIO93,
MFP_PIN_GPIO94,
MFP_PIN_GPIO95,
MFP_PIN_GPIO96,
MFP_PIN_GPIO97,
MFP_PIN_GPIO98,
MFP_PIN_GPIO99,
MFP_PIN_GPIO100,
MFP_PIN_GPIO101,
MFP_PIN_GPIO102,
MFP_PIN_GPIO103,
MFP_PIN_GPIO104,
MFP_PIN_GPIO105,
MFP_PIN_GPIO106,
MFP_PIN_GPIO107,
MFP_PIN_GPIO108,
MFP_PIN_GPIO109,
MFP_PIN_GPIO110,
MFP_PIN_GPIO111,
MFP_PIN_GPIO112,
MFP_PIN_GPIO113,
MFP_PIN_GPIO114,
MFP_PIN_GPIO115,
MFP_PIN_GPIO116,
MFP_PIN_GPIO117,
MFP_PIN_GPIO118,
MFP_PIN_GPIO119,
MFP_PIN_GPIO120,
MFP_PIN_GPIO121,
MFP_PIN_GPIO122,
MFP_PIN_GPIO123,
MFP_PIN_GPIO124,
MFP_PIN_GPIO125,
MFP_PIN_GPIO126,
MFP_PIN_GPIO127,
MFP_PIN_GPIO0_2,
MFP_PIN_GPIO1_2,
MFP_PIN_GPIO2_2,
MFP_PIN_GPIO3_2,
MFP_PIN_GPIO4_2,
MFP_PIN_GPIO5_2,
MFP_PIN_GPIO6_2,
MFP_PIN_GPIO7_2,
MFP_PIN_GPIO8_2,
MFP_PIN_GPIO9_2,
MFP_PIN_GPIO10_2,
MFP_PIN_GPIO11_2,
MFP_PIN_GPIO12_2,
MFP_PIN_GPIO13_2,
MFP_PIN_GPIO14_2,
MFP_PIN_GPIO15_2,
MFP_PIN_GPIO16_2,
MFP_PIN_GPIO17_2,
MFP_PIN_ULPI_STP,
MFP_PIN_ULPI_NXT,
MFP_PIN_ULPI_DIR,
MFP_PIN_nXCVREN,
MFP_PIN_DF_CLE_nOE,
MFP_PIN_DF_nADV1_ALE,
MFP_PIN_DF_SCLK_E,
MFP_PIN_DF_SCLK_S,
MFP_PIN_nBE0,
MFP_PIN_nBE1,
MFP_PIN_DF_nADV2_ALE,
MFP_PIN_DF_INT_RnB,
MFP_PIN_DF_nCS0,
MFP_PIN_DF_nCS1,
MFP_PIN_nLUA,
MFP_PIN_nLLA,
MFP_PIN_DF_nWE,
MFP_PIN_DF_ALE_nWE,
MFP_PIN_DF_nRE_nOE,
MFP_PIN_DF_ADDR0,
MFP_PIN_DF_ADDR1,
MFP_PIN_DF_ADDR2,
MFP_PIN_DF_ADDR3,
MFP_PIN_DF_IO0,
MFP_PIN_DF_IO1,
MFP_PIN_DF_IO2,
MFP_PIN_DF_IO3,
MFP_PIN_DF_IO4,
MFP_PIN_DF_IO5,
MFP_PIN_DF_IO6,
MFP_PIN_DF_IO7,
MFP_PIN_DF_IO8,
MFP_PIN_DF_IO9,
MFP_PIN_DF_IO10,
MFP_PIN_DF_IO11,
MFP_PIN_DF_IO12,
MFP_PIN_DF_IO13,
MFP_PIN_DF_IO14,
MFP_PIN_DF_IO15,
/* additional pins on PXA930 */
MFP_PIN_GSIM_UIO,
MFP_PIN_GSIM_UCLK,
MFP_PIN_GSIM_UDET,
MFP_PIN_GSIM_nURST,
MFP_PIN_PMIC_INT,
MFP_PIN_RDY,
MFP_PIN_MAX,
};
/*
* a possible MFP configuration is represented by a 32-bit integer
*
* bit 0.. 9 - MFP Pin Number (1024 Pins Maximum)
* bit 10..12 - Alternate Function Selection
* bit 13..15 - Drive Strength
* bit 16..18 - Low Power Mode State
* bit 19..20 - Low Power Mode Edge Detection
* bit 21..22 - Run Mode Pull State
*
* to facilitate the definition, the following macros are provided
*
* MFP_CFG_DEFAULT - default MFP configuration value, with
* alternate function = 0,
* drive strength = fast 3mA (MFP_DS03X)
* low power mode = default
* edge detection = none
*
* MFP_CFG - default MFPR value with alternate function
* MFP_CFG_DRV - default MFPR value with alternate function and
* pin drive strength
* MFP_CFG_LPM - default MFPR value with alternate function and
* low power mode
* MFP_CFG_X - default MFPR value with alternate function,
* pin drive strength and low power mode
*/
typedef unsigned long mfp_cfg_t;
#define MFP_PIN(x) ((x) & 0x3ff)
#define MFP_AF0 (0x0 << 10)
#define MFP_AF1 (0x1 << 10)
#define MFP_AF2 (0x2 << 10)
#define MFP_AF3 (0x3 << 10)
#define MFP_AF4 (0x4 << 10)
#define MFP_AF5 (0x5 << 10)
#define MFP_AF6 (0x6 << 10)
#define MFP_AF7 (0x7 << 10)
#define MFP_AF_MASK (0x7 << 10)
#define MFP_AF(x) (((x) >> 10) & 0x7)
#define MFP_DS01X (0x0 << 13)
#define MFP_DS02X (0x1 << 13)
#define MFP_DS03X (0x2 << 13)
#define MFP_DS04X (0x3 << 13)
#define MFP_DS06X (0x4 << 13)
#define MFP_DS08X (0x5 << 13)
#define MFP_DS10X (0x6 << 13)
#define MFP_DS13X (0x7 << 13)
#define MFP_DS_MASK (0x7 << 13)
#define MFP_DS(x) (((x) >> 13) & 0x7)
#define MFP_LPM_DEFAULT (0x0 << 16)
#define MFP_LPM_DRIVE_LOW (0x1 << 16)
#define MFP_LPM_DRIVE_HIGH (0x2 << 16)
#define MFP_LPM_PULL_LOW (0x3 << 16)
#define MFP_LPM_PULL_HIGH (0x4 << 16)
#define MFP_LPM_FLOAT (0x5 << 16)
#define MFP_LPM_INPUT (0x6 << 16)
#define MFP_LPM_STATE_MASK (0x7 << 16)
#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7)
#define MFP_LPM_EDGE_NONE (0x0 << 19)
#define MFP_LPM_EDGE_RISE (0x1 << 19)
#define MFP_LPM_EDGE_FALL (0x2 << 19)
#define MFP_LPM_EDGE_BOTH (0x3 << 19)
#define MFP_LPM_EDGE_MASK (0x3 << 19)
#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3)
#define MFP_PULL_NONE (0x0 << 21)
#define MFP_PULL_LOW (0x1 << 21)
#define MFP_PULL_HIGH (0x2 << 21)
#define MFP_PULL_BOTH (0x3 << 21)
#define MFP_PULL_MASK (0x3 << 21)
#define MFP_PULL(x) (((x) >> 21) & 0x3)
#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
#define MFP_CFG(pin, af) \
((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
(MFP_PIN(MFP_PIN_##pin) | MFP_##af))
#define MFP_CFG_DRV(pin, af, drv) \
((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
(MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
#define MFP_CFG_LPM(pin, af, lpm) \
((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
(MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
#define MFP_CFG_X(pin, af, drv, lpm) \
((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
(MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
#include <plat/mfp.h>
#endif /* __ASM_ARCH_MFP_H */

5
arch/arm/mach-pxa/include/mach/mmc.h
View File

@ -14,6 +14,11 @@ struct pxamci_platform_data {
int (*get_ro)(struct device *);
void (*setpower)(struct device *, unsigned int);
void (*exit)(struct device *, void *);
int gpio_card_detect; /* gpio detecting card insertion */
int gpio_card_ro; /* gpio detecting read only toggle */
bool gpio_card_ro_invert; /* gpio ro is inverted */
int gpio_power; /* gpio powering up MMC bus */
bool gpio_power_invert; /* gpio power is inverted */
};
extern void pxa_set_mci_info(struct pxamci_platform_data *info);

86
arch/arm/mach-pxa/include/mach/palmtc.h Normal file
View File

@ -0,0 +1,86 @@
/*
* linux/include/asm-arm/arch-pxa/palmtc-gpio.h
*
* GPIOs and interrupts for Palm Tungsten|C Handheld Computer
*
* Authors: Alex Osborne <bobofdoom@gmail.com>
* Marek Vasut <marek.vasut@gmail.com>
* Holger Bocklet <bitz.email@gmx.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef _INCLUDE_PALMTC_H_
#define _INCLUDE_PALMTC_H_
/** HERE ARE GPIOs **/
/* GPIOs */
#define GPIO_NR_PALMTC_EARPHONE_DETECT 2
#define GPIO_NR_PALMTC_CRADLE_DETECT 5
#define GPIO_NR_PALMTC_HOTSYNC_BUTTON 7
/* SD/MMC */
#define GPIO_NR_PALMTC_SD_DETECT_N 12
#define GPIO_NR_PALMTC_SD_POWER 32
#define GPIO_NR_PALMTC_SD_READONLY 54
/* WLAN */
#define GPIO_NR_PALMTC_PCMCIA_READY 13
#define GPIO_NR_PALMTC_PCMCIA_PWRREADY 14
#define GPIO_NR_PALMTC_PCMCIA_POWER1 15
#define GPIO_NR_PALMTC_PCMCIA_POWER2 33
#define GPIO_NR_PALMTC_PCMCIA_POWER3 55
#define GPIO_NR_PALMTC_PCMCIA_RESET 78
/* UDC */
#define GPIO_NR_PALMTC_USB_DETECT_N 4
#define GPIO_NR_PALMTC_USB_POWER 36
/* LCD/BACKLIGHT */
#define GPIO_NR_PALMTC_BL_POWER 16
#define GPIO_NR_PALMTC_LCD_POWER 44
#define GPIO_NR_PALMTC_LCD_BLANK 38
/* UART */
#define GPIO_NR_PALMTC_RS232_POWER 37
/* IRDA */
#define GPIO_NR_PALMTC_IR_DISABLE 45
/* IRQs */
#define IRQ_GPIO_PALMTC_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMTC_SD_DETECT_N)
#define IRQ_GPIO_PALMTC_WLAN_READY IRQ_GPIO(GPIO_NR_PALMTC_WLAN_READY)
/* UCB1400 GPIOs */
#define GPIO_NR_PALMTC_POWER_DETECT (0x80 | 0x00)
#define GPIO_NR_PALMTC_HEADPHONE_DETECT (0x80 | 0x01)
#define GPIO_NR_PALMTC_SPEAKER_ENABLE (0x80 | 0x03)
#define GPIO_NR_PALMTC_VIBRA_POWER (0x80 | 0x05)
#define GPIO_NR_PALMTC_LED_POWER (0x80 | 0x07)
/** HERE ARE INIT VALUES **/
#define PALMTC_UCB1400_GPIO_OFFSET 0x80
/* BATTERY */
#define PALMTC_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */
#define PALMTC_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */
#define PALMTC_BAT_MAX_CURRENT 0 /* unknokn */
#define PALMTC_BAT_MIN_CURRENT 0 /* unknown */
#define PALMTC_BAT_MAX_CHARGE 1 /* unknown */
#define PALMTC_BAT_MIN_CHARGE 1 /* unknown */
#define PALMTC_MAX_LIFE_MINS 240 /* on-life in minutes */
#define PALMTC_BAT_MEASURE_DELAY (HZ * 1)
/* BACKLIGHT */
#define PALMTC_MAX_INTENSITY 0xFE
#define PALMTC_DEFAULT_INTENSITY 0x7E
#define PALMTC_LIMIT_MASK 0x7F
#define PALMTC_PRESCALER 0x3F
#define PALMTC_PERIOD_NS 3500
#endif

5
arch/arm/mach-pxa/include/mach/palmtx.h
View File

@ -82,6 +82,11 @@
#define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */
#define PALMTX_PHYS_NAND_START PXA_CS1_PHYS /* ChipSelect 1 */
#define PALMTX_NAND_ALE_PHYS (PALMTX_PHYS_NAND_START | (1 << 24))
#define PALMTX_NAND_CLE_PHYS (PALMTX_PHYS_NAND_START | (1 << 25))
#define PALMTX_NAND_ALE_VIRT 0xff100000
#define PALMTX_NAND_CLE_VIRT 0xff200000
/* TOUCHSCREEN */
#define AC97_LINK_FRAME 21

4
arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
View File

@ -208,7 +208,7 @@
#define CKEN_MVED 43 /* < MVED clock enable */
/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
#define PXA300_CKEN_GRAPHICS 42 /* Graphics controller clock enable */
#define PXA320_CKEN_GRAPHICS 7 /* Graphics controller clock enable */
#define CKEN_PXA300_GCU 42 /* Graphics controller clock enable */
#define CKEN_PXA320_GCU 7 /* Graphics controller clock enable */
#endif /* __ASM_ARCH_PXA3XX_REGS_H */

3
arch/arm/mach-pxa/include/mach/pxafb.h
View File

@ -118,7 +118,8 @@ struct pxafb_mach_info {
u_int fixed_modes:1,
cmap_inverse:1,
cmap_static:1,
unused:29;
acceleration_enabled:1,
unused:28;
/* The following should be defined in LCCR0
* LCCR0_Act or LCCR0_Pas Active or Passive

11
arch/arm/mach-pxa/include/mach/regs-intc.h
View File

@ -13,6 +13,7 @@
#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */
#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */
#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */
#define ICHP __REG(0x40D00018) /* Interrupt Controller Highest Priority Register */
#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
@ -20,4 +21,14 @@
#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
#define ICIP3 __REG(0x40D00130) /* Interrupt Controller IRQ Pending Register 3 */
#define ICMR3 __REG(0x40D00134) /* Interrupt Controller Mask Register 3 */
#define ICLR3 __REG(0x40D00138) /* Interrupt Controller Level Register 3 */
#define ICFP3 __REG(0x40D0013C) /* Interrupt Controller FIQ Pending Register 3 */
#define ICPR3 __REG(0x40D00140) /* Interrupt Controller Pending Register 3 */
#define IPR(x) __REG(0x40D0001C + (x < 32 ? (x << 2) \
: (x < 64 ? (0x94 + ((x - 32) << 2)) \
: (0x128 + ((x - 64) << 2)))))
#endif /* __ASM_MACH_REGS_INTC_H */

2
arch/arm/mach-pxa/include/mach/uncompress.h
View File

@ -37,7 +37,7 @@ static inline void arch_decomp_setup(void)
{
if (machine_is_littleton() || machine_is_intelmote2()
|| machine_is_csb726() || machine_is_stargate2()
|| machine_is_cm_x300())
|| machine_is_cm_x300() || machine_is_balloon3())
UART = STUART;
}

8
arch/arm/mach-pxa/irq.c
View File

@ -120,7 +120,7 @@ static void __init pxa_init_low_gpio_irq(set_wake_t fn)
void __init pxa_init_irq(int irq_nr, set_wake_t fn)
{
int irq;
int irq, i;
pxa_internal_irq_nr = irq_nr;
@ -129,6 +129,12 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
_ICLR(irq) = 0; /* all IRQs are IRQ, not FIQ */
}
/* initialize interrupt priority */
if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
for (i = 0; i < irq_nr; i++)
IPR(i) = i | (1 << 31);
}
/* only unmasked interrupts kick us out of idle */
ICCR = 1;

43
arch/arm/mach-pxa/littleton.c
View File

@ -265,45 +265,12 @@ static inline void littleton_init_keypad(void) {}
#endif
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
static int littleton_mci_init(struct device *dev,
irq_handler_t littleton_detect_int, void *data)
{
int err, gpio_cd = GPIO_MMC1_CARD_DETECT;
err = gpio_request(gpio_cd, "mmc card detect");
if (err)
goto err_request_cd;
gpio_direction_input(gpio_cd);
err = request_irq(gpio_to_irq(gpio_cd), littleton_detect_int,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"mmc card detect", data);
if (err) {
dev_err(dev, "failed to request card detect IRQ\n");
goto err_request_irq;
}
return 0;
err_request_irq:
gpio_free(gpio_cd);
err_request_cd:
return err;
}
static void littleton_mci_exit(struct device *dev, void *data)
{
int gpio_cd = GPIO_MMC1_CARD_DETECT;
free_irq(gpio_to_irq(gpio_cd), data);
gpio_free(gpio_cd);
}
static struct pxamci_platform_data littleton_mci_platform_data = {
.detect_delay = 20,
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.init = littleton_mci_init,
.exit = littleton_mci_exit,
.detect_delay = 20,
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.gpio_card_detect = GPIO_MMC1_CARD_DETECT,
.gpio_card_ro = -1,
.gpio_power = -1,
};
static void __init littleton_init_mmc(void)

18
arch/arm/mach-pxa/lubbock.c
View File

@ -482,11 +482,14 @@ static void lubbock_mci_exit(struct device *dev, void *data)
}
static struct pxamci_platform_data lubbock_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.detect_delay = 1,
.init = lubbock_mci_init,
.get_ro = lubbock_mci_get_ro,
.exit = lubbock_mci_exit,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.detect_delay = 1,
.init = lubbock_mci_init,
.get_ro = lubbock_mci_get_ro,
.exit = lubbock_mci_exit,
.gpio_card_detect = -1,
.gpio_card_ro = -1,
.gpio_power = -1,
};
static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
@ -504,8 +507,9 @@ static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
}
static struct pxaficp_platform_data lubbock_ficp_platform_data = {
.transceiver_cap = IR_SIRMODE | IR_FIRMODE,
.transceiver_mode = lubbock_irda_transceiver_mode,
.gpio_pwdown = -1,
.transceiver_cap = IR_SIRMODE | IR_FIRMODE,
.transceiver_mode = lubbock_irda_transceiver_mode,
};
static void __init lubbock_init(void)

59
arch/arm/mach-pxa/magician.c
View File

@ -140,15 +140,9 @@ static unsigned long magician_pin_config[] __initdata = {
* IRDA
*/
static void magician_irda_transceiver_mode(struct device *dev, int mode)
{
gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF);
pxa2xx_transceiver_mode(dev, mode);
}
static struct pxaficp_platform_data magician_ficp_info = {
.transceiver_cap = IR_SIRMODE | IR_OFF,
.transceiver_mode = magician_irda_transceiver_mode,
.gpio_pwdown = GPIO83_MAGICIAN_nIR_EN,
.transceiver_cap = IR_SIRMODE | IR_OFF,
};
/*
@ -651,55 +645,24 @@ static struct platform_device bq24022 = {
static int magician_mci_init(struct device *dev,
irq_handler_t detect_irq, void *data)
{
int err;
err = request_irq(IRQ_MAGICIAN_SD, detect_irq,
return request_irq(IRQ_MAGICIAN_SD, detect_irq,
IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
"MMC card detect", data);
if (err)
goto err_request_irq;
err = gpio_request(EGPIO_MAGICIAN_SD_POWER, "SD_POWER");
if (err)
goto err_request_power;
err = gpio_request(EGPIO_MAGICIAN_nSD_READONLY, "nSD_READONLY");
if (err)
goto err_request_readonly;
return 0;
err_request_readonly:
gpio_free(EGPIO_MAGICIAN_SD_POWER);
err_request_power:
free_irq(IRQ_MAGICIAN_SD, data);
err_request_irq:
return err;
}
static void magician_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data *pdata = dev->platform_data;
gpio_set_value(EGPIO_MAGICIAN_SD_POWER, (1 << vdd) & pdata->ocr_mask);
}
static int magician_mci_get_ro(struct device *dev)
{
return (!gpio_get_value(EGPIO_MAGICIAN_nSD_READONLY));
"mmc card detect", data);
}
static void magician_mci_exit(struct device *dev, void *data)
{
gpio_free(EGPIO_MAGICIAN_nSD_READONLY);
gpio_free(EGPIO_MAGICIAN_SD_POWER);
free_irq(IRQ_MAGICIAN_SD, data);
}
static struct pxamci_platform_data magician_mci_info = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = magician_mci_init,
.get_ro = magician_mci_get_ro,
.setpower = magician_mci_setpower,
.exit = magician_mci_exit,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = magician_mci_init,
.exit = magician_mci_exit,
.gpio_card_detect = -1,
.gpio_card_ro = EGPIO_MAGICIAN_nSD_READONLY,
.gpio_card_ro_invert = 1,
.gpio_power = EGPIO_MAGICIAN_SD_POWER,
};

16
arch/arm/mach-pxa/mainstone.c
View File

@ -450,10 +450,13 @@ static void mainstone_mci_exit(struct device *dev, void *data)
}
static struct pxamci_platform_data mainstone_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = mainstone_mci_init,
.setpower = mainstone_mci_setpower,
.exit = mainstone_mci_exit,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = mainstone_mci_init,
.setpower = mainstone_mci_setpower,
.exit = mainstone_mci_exit,
.gpio_card_detect = -1,
.gpio_card_ro = -1,
.gpio_power = -1,
};
static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
@ -476,8 +479,9 @@ static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
}
static struct pxaficp_platform_data mainstone_ficp_platform_data = {
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
.transceiver_mode = mainstone_irda_transceiver_mode,
.gpio_pwdown = -1,
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
.transceiver_mode = mainstone_irda_transceiver_mode,
};
static struct gpio_keys_button gpio_keys_button[] = {

84
arch/arm/mach-pxa/mioa701.c
View File

@ -434,72 +434,15 @@ struct gpio_vbus_mach_info gpio_vbus_data = {
/*
* SDIO/MMC Card controller
*/
static void mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data *p_d = dev->platform_data;
if ((1 << vdd) & p_d->ocr_mask)
gpio_set_value(GPIO91_SDIO_EN, 1); /* enable SDIO power */
else
gpio_set_value(GPIO91_SDIO_EN, 0); /* disable SDIO power */
}
static int mci_get_ro(struct device *dev)
{
return gpio_get_value(GPIO78_SDIO_RO);
}
struct gpio_ress mci_gpios[] = {
MIO_GPIO_IN(GPIO78_SDIO_RO, "SDIO readonly detect"),
MIO_GPIO_IN(GPIO15_SDIO_INSERT, "SDIO insertion detect"),
MIO_GPIO_OUT(GPIO91_SDIO_EN, 0, "SDIO power enable")
};
static void mci_exit(struct device *dev, void *data)
{
mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
free_irq(gpio_to_irq(GPIO15_SDIO_INSERT), data);
}
static struct pxamci_platform_data mioa701_mci_info;
/**
* The card detect interrupt isn't debounced so we delay it by 250ms
* to give the card a chance to fully insert/eject.
*/
static int mci_init(struct device *dev, irq_handler_t detect_int, void *data)
{
int rc;
int irq = gpio_to_irq(GPIO15_SDIO_INSERT);
rc = mio_gpio_request(ARRAY_AND_SIZE(mci_gpios));
if (rc)
goto err_gpio;
/* enable RE/FE interrupt on card insertion and removal */
rc = request_irq(irq, detect_int,
IRQF_DISABLED | IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING,
"MMC card detect", data);
if (rc)
goto err_irq;
mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
return 0;
err_irq:
dev_err(dev, "mioa701_mci_init: MMC/SD:"
" can't request MMC card detect IRQ\n");
mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
err_gpio:
return rc;
}
static struct pxamci_platform_data mioa701_mci_info = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.init = mci_init,
.get_ro = mci_get_ro,
.setpower = mci_setpower,
.exit = mci_exit,
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.gpio_card_detect = GPIO15_SDIO_INSERT,
.gpio_card_ro = GPIO78_SDIO_RO,
.gpio_power = GPIO91_SDIO_EN,
};
/* FlashRAM */
@ -765,19 +708,20 @@ static struct i2c_board_info __initdata mioa701_pi2c_devices[] = {
},
};
static struct soc_camera_link iclink = {
.bus_id = 0, /* Must match id in pxa27x_device_camera in device.c */
};
/* Board I2C devices. */
static struct i2c_board_info __initdata mioa701_i2c_devices[] = {
{
/* Must initialize before the camera(s) */
I2C_BOARD_INFO("mt9m111", 0x5d),
.platform_data = &iclink,
},
};
static struct soc_camera_link iclink = {
.bus_id = 0, /* Match id in pxa27x_device_camera in device.c */
.board_info = &mioa701_i2c_devices[0],
.i2c_adapter_id = 0,
.module_name = "mt9m111",
};
struct i2c_pxa_platform_data i2c_pdata = {
.fast_mode = 1,
};
@ -811,6 +755,7 @@ MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL)
MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL)
MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL)
MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data);
MIO_SIMPLE_DEV(mioa701_camera, "soc-camera-pdrv",&iclink);
static struct platform_device *devices[] __initdata = {
&mioa701_gpio_keys,
@ -821,6 +766,7 @@ static struct platform_device *devices[] __initdata = {
&power_dev,
&strataflash,
&gpio_vbus,
&mioa701_camera,
&mioa701_board,
};
@ -841,7 +787,7 @@ static void mioa701_restart(char c, const char *cmd)
static struct gpio_ress global_gpios[] = {
MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power"),
};
static void __init mioa701_machine_init(void)
@ -855,6 +801,7 @@ static void __init mioa701_machine_init(void)
mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
bootstrap_init();
set_pxa_fb_info(&mioa701_pxafb_info);
mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
pxa_set_mci_info(&mioa701_mci_info);
pxa_set_keypad_info(&mioa701_keypad_info);
wm97xx_bat_set_pdata(&mioa701_battery_data);
@ -869,7 +816,6 @@ static void __init mioa701_machine_init(void)
pxa_set_i2c_info(&i2c_pdata);
pxa27x_set_i2c_power_info(NULL);
pxa_set_camera_info(&mioa701_pxacamera_platform_data);
i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices));
}
static void mioa701_machine_exit(void)

151
arch/arm/mach-pxa/palmld.c
View File

@ -25,6 +25,9 @@
#include <linux/wm97xx_batt.h>
#include <linux/power_supply.h>
#include <linux/sysdev.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -140,86 +143,51 @@ static unsigned long palmld_pin_config[] __initdata = {
GPIO13_GPIO, /* earphone detect */
};
/******************************************************************************
* NOR Flash
******************************************************************************/
static struct mtd_partition palmld_partitions[] = {
{
.name = "Flash",
.offset = 0x00000000,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0
}
};
static struct physmap_flash_data palmld_flash_data[] = {
{
.width = 2, /* bankwidth in bytes */
.parts = palmld_partitions,
.nr_parts = ARRAY_SIZE(palmld_partitions)
}
};
static struct resource palmld_flash_resource = {
.start = PXA_CS0_PHYS,
.end = PXA_CS0_PHYS + SZ_4M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device palmld_flash = {
.name = "physmap-flash",
.id = 0,
.resource = &palmld_flash_resource,
.num_resources = 1,
.dev = {
.platform_data = palmld_flash_data,
},
};
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
static int palmld_mci_init(struct device *dev, irq_handler_t palmld_detect_int,
void *data)
{
int err = 0;
/* Setup an interrupt for detecting card insert/remove events */
err = gpio_request(GPIO_NR_PALMLD_SD_DETECT_N, "SD IRQ");
if (err)
goto err;
err = gpio_direction_input(GPIO_NR_PALMLD_SD_DETECT_N);
if (err)
goto err2;
err = request_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N),
palmld_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"SD/MMC card detect", data);
if (err) {
printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
__func__);
goto err2;
}
err = gpio_request(GPIO_NR_PALMLD_SD_POWER, "SD_POWER");
if (err)
goto err3;
err = gpio_direction_output(GPIO_NR_PALMLD_SD_POWER, 0);
if (err)
goto err4;
err = gpio_request(GPIO_NR_PALMLD_SD_READONLY, "SD_READONLY");
if (err)
goto err4;
err = gpio_direction_input(GPIO_NR_PALMLD_SD_READONLY);
if (err)
goto err5;
printk(KERN_DEBUG "%s: irq registered\n", __func__);
return 0;
err5:
gpio_free(GPIO_NR_PALMLD_SD_READONLY);
err4:
gpio_free(GPIO_NR_PALMLD_SD_POWER);
err3:
free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
err2:
gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
err:
return err;
}
static void palmld_mci_exit(struct device *dev, void *data)
{
gpio_free(GPIO_NR_PALMLD_SD_READONLY);
gpio_free(GPIO_NR_PALMLD_SD_POWER);
free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
}
static void palmld_mci_power(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data *p_d = dev->platform_data;
gpio_set_value(GPIO_NR_PALMLD_SD_POWER, p_d->ocr_mask & (1 << vdd));
}
static int palmld_mci_get_ro(struct device *dev)
{
return gpio_get_value(GPIO_NR_PALMLD_SD_READONLY);
}
static struct pxamci_platform_data palmld_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.setpower = palmld_mci_power,
.get_ro = palmld_mci_get_ro,
.init = palmld_mci_init,
.exit = palmld_mci_exit,
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.gpio_card_detect = GPIO_NR_PALMLD_SD_DETECT_N,
.gpio_card_ro = GPIO_NR_PALMLD_SD_READONLY,
.gpio_power = GPIO_NR_PALMLD_SD_POWER,
.detect_delay = 20,
};
/******************************************************************************
@ -336,35 +304,9 @@ static struct platform_device palmld_backlight = {
/******************************************************************************
* IrDA
******************************************************************************/
static int palmld_irda_startup(struct device *dev)
{
int err;
err = gpio_request(GPIO_NR_PALMLD_IR_DISABLE, "IR DISABLE");
if (err)
goto err;
err = gpio_direction_output(GPIO_NR_PALMLD_IR_DISABLE, 1);
if (err)
gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
err:
return err;
}
static void palmld_irda_shutdown(struct device *dev)
{
gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
}
static void palmld_irda_transceiver_mode(struct device *dev, int mode)
{
gpio_set_value(GPIO_NR_PALMLD_IR_DISABLE, mode & IR_OFF);
pxa2xx_transceiver_mode(dev, mode);
}
static struct pxaficp_platform_data palmld_ficp_platform_data = {
.startup = palmld_irda_startup,
.shutdown = palmld_irda_shutdown,
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
.transceiver_mode = palmld_irda_transceiver_mode,
.gpio_pwdown = GPIO_NR_PALMLD_IR_DISABLE,
.transceiver_cap = IR_SIRMODE | IR_OFF,
};
/******************************************************************************
@ -560,6 +502,7 @@ static struct platform_device *devices[] __initdata = {
&power_supply,
&palmld_asoc,
&palmld_hdd,
&palmld_flash,
};
static struct map_desc palmld_io_desc[] __initdata = {

111
arch/arm/mach-pxa/palmt5.c
View File

@ -124,83 +124,12 @@ static unsigned long palmt5_pin_config[] __initdata = {
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
static int palmt5_mci_init(struct device *dev, irq_handler_t palmt5_detect_int,
void *data)
{
int err = 0;
/* Setup an interrupt for detecting card insert/remove events */
err = gpio_request(GPIO_NR_PALMT5_SD_DETECT_N, "SD IRQ");
if (err)
goto err;
err = gpio_direction_input(GPIO_NR_PALMT5_SD_DETECT_N);
if (err)
goto err2;
err = request_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N),
palmt5_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"SD/MMC card detect", data);
if (err) {
printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
__func__);
goto err2;
}
err = gpio_request(GPIO_NR_PALMT5_SD_POWER, "SD_POWER");
if (err)
goto err3;
err = gpio_direction_output(GPIO_NR_PALMT5_SD_POWER, 0);
if (err)
goto err4;
err = gpio_request(GPIO_NR_PALMT5_SD_READONLY, "SD_READONLY");
if (err)
goto err4;
err = gpio_direction_input(GPIO_NR_PALMT5_SD_READONLY);
if (err)
goto err5;
printk(KERN_DEBUG "%s: irq registered\n", __func__);
return 0;
err5:
gpio_free(GPIO_NR_PALMT5_SD_READONLY);
err4:
gpio_free(GPIO_NR_PALMT5_SD_POWER);
err3:
free_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N), data);
err2:
gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
err:
return err;
}
static void palmt5_mci_exit(struct device *dev, void *data)
{
gpio_free(GPIO_NR_PALMT5_SD_READONLY);
gpio_free(GPIO_NR_PALMT5_SD_POWER);
free_irq(IRQ_GPIO_PALMT5_SD_DETECT_N, data);
gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
}
static void palmt5_mci_power(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data *p_d = dev->platform_data;
gpio_set_value(GPIO_NR_PALMT5_SD_POWER, p_d->ocr_mask & (1 << vdd));
}
static int palmt5_mci_get_ro(struct device *dev)
{
return gpio_get_value(GPIO_NR_PALMT5_SD_READONLY);
}
static struct pxamci_platform_data palmt5_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.setpower = palmt5_mci_power,
.get_ro = palmt5_mci_get_ro,
.init = palmt5_mci_init,
.exit = palmt5_mci_exit,
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.gpio_card_detect = GPIO_NR_PALMT5_SD_DETECT_N,
.gpio_card_ro = GPIO_NR_PALMT5_SD_READONLY,
.gpio_power = GPIO_NR_PALMT5_SD_POWER,
.detect_delay = 20,
};
/******************************************************************************
@ -314,35 +243,9 @@ static struct platform_device palmt5_backlight = {
/******************************************************************************
* IrDA
******************************************************************************/
static int palmt5_irda_startup(struct device *dev)
{
int err;
err = gpio_request(GPIO_NR_PALMT5_IR_DISABLE, "IR DISABLE");
if (err)
goto err;
err = gpio_direction_output(GPIO_NR_PALMT5_IR_DISABLE, 1);
if (err)
gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
err:
return err;
}
static void palmt5_irda_shutdown(struct device *dev)
{
gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
}
static void palmt5_irda_transceiver_mode(struct device *dev, int mode)
{
gpio_set_value(GPIO_NR_PALMT5_IR_DISABLE, mode & IR_OFF);
pxa2xx_transceiver_mode(dev, mode);
}
static struct pxaficp_platform_data palmt5_ficp_platform_data = {
.startup = palmt5_irda_startup,
.shutdown = palmt5_irda_shutdown,
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
.transceiver_mode = palmt5_irda_transceiver_mode,
.gpio_pwdown = GPIO_NR_PALMT5_IR_DISABLE,
.transceiver_cap = IR_SIRMODE | IR_OFF,
};
/******************************************************************************

436
arch/arm/mach-pxa/palmtc.c Normal file
View File

@ -0,0 +1,436 @@
/*
* linux/arch/arm/mach-pxa/palmtc.c
*
* Support for the Palm Tungsten|C
*
* Author: Marek Vasut <marek.vasut@gmail.com>
*
* Based on work of:
* Petr Blaha <p3t3@centrum.cz>
* Chetan S. Kumar <shivakumar.chetan@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/input.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
#include <linux/input/matrix_keypad.h>
#include <linux/ucb1400.h>
#include <linux/power_supply.h>
#include <linux/gpio_keys.h>
#include <linux/mtd/physmap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/audio.h>
#include <mach/palmtc.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
#include <mach/mfp-pxa25x.h>
#include <mach/irda.h>
#include <mach/udc.h>
#include <mach/pxa2xx-regs.h>
#include "generic.h"
#include "devices.h"
/******************************************************************************
* Pin configuration
******************************************************************************/
static unsigned long palmtc_pin_config[] __initdata = {
/* MMC */
GPIO6_MMC_CLK,
GPIO8_MMC_CS0,
GPIO12_GPIO, /* detect */
GPIO32_GPIO, /* power */
GPIO54_GPIO, /* r/o switch */
/* PCMCIA */
GPIO52_nPCE_1,
GPIO53_nPCE_2,
GPIO50_nPIOR,
GPIO51_nPIOW,
GPIO49_nPWE,
GPIO48_nPOE,
GPIO52_nPCE_1,
GPIO53_nPCE_2,
GPIO57_nIOIS16,
GPIO56_nPWAIT,
/* AC97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
/* IrDA */
GPIO45_GPIO, /* ir disable */
GPIO46_FICP_RXD,
GPIO47_FICP_TXD,
/* PWM */
GPIO17_PWM1_OUT,
/* USB */
GPIO4_GPIO, /* detect */
GPIO36_GPIO, /* pullup */
/* LCD */
GPIO58_LCD_LDD_0,
GPIO59_LCD_LDD_1,
GPIO60_LCD_LDD_2,
GPIO61_LCD_LDD_3,
GPIO62_LCD_LDD_4,
GPIO63_LCD_LDD_5,
GPIO64_LCD_LDD_6,
GPIO65_LCD_LDD_7,
GPIO66_LCD_LDD_8,
GPIO67_LCD_LDD_9,
GPIO68_LCD_LDD_10,
GPIO69_LCD_LDD_11,
GPIO70_LCD_LDD_12,
GPIO71_LCD_LDD_13,
GPIO72_LCD_LDD_14,
GPIO73_LCD_LDD_15,
GPIO74_LCD_FCLK,
GPIO75_LCD_LCLK,
GPIO76_LCD_PCLK,
GPIO77_LCD_BIAS,
/* MATRIX KEYPAD */
GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 0 */
GPIO9_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 1 */
GPIO10_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 2 */
GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 3 */
GPIO18_GPIO | MFP_LPM_DRIVE_LOW, /* out 0 */
GPIO19_GPIO | MFP_LPM_DRIVE_LOW, /* out 1 */
GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* out 2 */
GPIO21_GPIO | MFP_LPM_DRIVE_LOW, /* out 3 */
GPIO22_GPIO | MFP_LPM_DRIVE_LOW, /* out 4 */
GPIO23_GPIO | MFP_LPM_DRIVE_LOW, /* out 5 */
GPIO24_GPIO | MFP_LPM_DRIVE_LOW, /* out 6 */
GPIO25_GPIO | MFP_LPM_DRIVE_LOW, /* out 7 */
GPIO26_GPIO | MFP_LPM_DRIVE_LOW, /* out 8 */
GPIO27_GPIO | MFP_LPM_DRIVE_LOW, /* out 9 */
GPIO79_GPIO | MFP_LPM_DRIVE_LOW, /* out 10 */
GPIO80_GPIO | MFP_LPM_DRIVE_LOW, /* out 11 */
/* PXA GPIO KEYS */
GPIO7_GPIO | WAKEUP_ON_EDGE_BOTH, /* hotsync button on cradle */
/* MISC */
GPIO1_RST, /* reset */
GPIO2_GPIO, /* earphone detect */
GPIO16_GPIO, /* backlight switch */
};
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
static struct pxamci_platform_data palmtc_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.gpio_power = GPIO_NR_PALMTC_SD_POWER,
.gpio_card_ro = GPIO_NR_PALMTC_SD_READONLY,
.gpio_card_detect = GPIO_NR_PALMTC_SD_DETECT_N,
.detect_delay = 20,
};
/******************************************************************************
* GPIO keys
******************************************************************************/
static struct gpio_keys_button palmtc_pxa_buttons[] = {
{KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1},
};
static struct gpio_keys_platform_data palmtc_pxa_keys_data = {
.buttons = palmtc_pxa_buttons,
.nbuttons = ARRAY_SIZE(palmtc_pxa_buttons),
};
static struct platform_device palmtc_pxa_keys = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &palmtc_pxa_keys_data,
},
};
/******************************************************************************
* Backlight
******************************************************************************/
static int palmtc_backlight_init(struct device *dev)
{
int ret;
ret = gpio_request(GPIO_NR_PALMTC_BL_POWER, "BL POWER");
if (ret)
goto err;
ret = gpio_direction_output(GPIO_NR_PALMTC_BL_POWER, 1);
if (ret)
goto err2;
return 0;
err2:
gpio_free(GPIO_NR_PALMTC_BL_POWER);
err:
return ret;
}
static int palmtc_backlight_notify(int brightness)
{
/* backlight is on when GPIO16 AF0 is high */
gpio_set_value(GPIO_NR_PALMTC_BL_POWER, brightness);
return brightness;
}
static void palmtc_backlight_exit(struct device *dev)
{
gpio_free(GPIO_NR_PALMTC_BL_POWER);
}
static struct platform_pwm_backlight_data palmtc_backlight_data = {
.pwm_id = 1,
.max_brightness = PALMTC_MAX_INTENSITY,
.dft_brightness = PALMTC_MAX_INTENSITY,
.pwm_period_ns = PALMTC_PERIOD_NS,
.init = palmtc_backlight_init,
.notify = palmtc_backlight_notify,
.exit = palmtc_backlight_exit,
};
static struct platform_device palmtc_backlight = {
.name = "pwm-backlight",
.dev = {
.parent = &pxa25x_device_pwm1.dev,
.platform_data = &palmtc_backlight_data,
},
};
/******************************************************************************
* IrDA
******************************************************************************/
static struct pxaficp_platform_data palmtc_ficp_platform_data = {
.gpio_pwdown = GPIO_NR_PALMTC_IR_DISABLE,
.transceiver_cap = IR_SIRMODE | IR_OFF,
};
/******************************************************************************
* Keyboard
******************************************************************************/
static const uint32_t palmtc_matrix_keys[] = {
KEY(0, 0, KEY_F1),
KEY(0, 1, KEY_X),
KEY(0, 2, KEY_POWER),
KEY(0, 3, KEY_TAB),
KEY(0, 4, KEY_A),
KEY(0, 5, KEY_Q),
KEY(0, 6, KEY_LEFTSHIFT),
KEY(0, 7, KEY_Z),
KEY(0, 8, KEY_S),
KEY(0, 9, KEY_W),
KEY(0, 10, KEY_E),
KEY(0, 11, KEY_UP),
KEY(1, 0, KEY_F2),
KEY(1, 1, KEY_DOWN),
KEY(1, 3, KEY_D),
KEY(1, 4, KEY_C),
KEY(1, 5, KEY_F),
KEY(1, 6, KEY_R),
KEY(1, 7, KEY_SPACE),
KEY(1, 8, KEY_V),
KEY(1, 9, KEY_G),
KEY(1, 10, KEY_T),
KEY(1, 11, KEY_LEFT),
KEY(2, 0, KEY_F3),
KEY(2, 1, KEY_LEFTCTRL),
KEY(2, 3, KEY_H),
KEY(2, 4, KEY_Y),
KEY(2, 5, KEY_N),
KEY(2, 6, KEY_J),
KEY(2, 7, KEY_U),
KEY(2, 8, KEY_M),
KEY(2, 9, KEY_K),
KEY(2, 10, KEY_I),
KEY(2, 11, KEY_RIGHT),
KEY(3, 0, KEY_F4),
KEY(3, 1, KEY_ENTER),
KEY(3, 3, KEY_DOT),
KEY(3, 4, KEY_L),
KEY(3, 5, KEY_O),
KEY(3, 6, KEY_LEFTALT),
KEY(3, 7, KEY_ENTER),
KEY(3, 8, KEY_BACKSPACE),
KEY(3, 9, KEY_P),
KEY(3, 10, KEY_B),
KEY(3, 11, KEY_FN),
};
const struct matrix_keymap_data palmtc_keymap_data = {
.keymap = palmtc_matrix_keys,
.keymap_size = ARRAY_SIZE(palmtc_matrix_keys),
};
const static unsigned int palmtc_keypad_row_gpios[] = {
0, 9, 10, 11
};
const static unsigned int palmtc_keypad_col_gpios[] = {
18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
};
static struct matrix_keypad_platform_data palmtc_keypad_platform_data = {
.keymap_data = &palmtc_keymap_data,
.col_gpios = palmtc_keypad_row_gpios,
.num_col_gpios = 12,
.row_gpios = palmtc_keypad_col_gpios,
.num_row_gpios = 4,
.active_low = 1,
.debounce_ms = 20,
.col_scan_delay_us = 5,
};
static struct platform_device palmtc_keyboard = {
.name = "matrix-keypad",
.id = -1,
.dev = {
.platform_data = &palmtc_keypad_platform_data,
},
};
/******************************************************************************
* UDC
******************************************************************************/
static struct pxa2xx_udc_mach_info palmtc_udc_info __initdata = {
.gpio_vbus = GPIO_NR_PALMTC_USB_DETECT_N,
.gpio_vbus_inverted = 1,
.gpio_pullup = GPIO_NR_PALMTC_USB_POWER,
};
/******************************************************************************
* Touchscreen / Battery / GPIO-extender
******************************************************************************/
static struct platform_device palmtc_ucb1400_core = {
.name = "ucb1400_core",
.id = -1,
};
/******************************************************************************
* NOR Flash
******************************************************************************/
static struct resource palmtc_flash_resource = {
.start = PXA_CS0_PHYS,
.end = PXA_CS0_PHYS + SZ_16M - 1,
.flags = IORESOURCE_MEM,
};
static struct mtd_partition palmtc_flash_parts[] = {
{
.name = "U-Boot Bootloader",
.offset = 0x0,
.size = 0x40000,
},
{
.name = "Linux Kernel",
.offset = 0x40000,
.size = 0x2c0000,
},
{
.name = "Filesystem",
.offset = 0x300000,
.size = 0xcc0000,
},
{
.name = "U-Boot Environment",
.offset = 0xfc0000,
.size = MTDPART_SIZ_FULL,
},
};
static struct physmap_flash_data palmtc_flash_data = {
.width = 4,
.parts = palmtc_flash_parts,
.nr_parts = ARRAY_SIZE(palmtc_flash_parts),
};
static struct platform_device palmtc_flash = {
.name = "physmap-flash",
.id = -1,
.resource = &palmtc_flash_resource,
.num_resources = 1,
.dev = {
.platform_data = &palmtc_flash_data,
},
};
/******************************************************************************
* Framebuffer
******************************************************************************/
static struct pxafb_mode_info palmtc_lcd_modes[] = {
{
.pixclock = 115384,
.xres = 320,
.yres = 320,
.bpp = 16,
.left_margin = 27,
.right_margin = 7,
.upper_margin = 7,
.lower_margin = 8,
.hsync_len = 6,
.vsync_len = 1,
},
};
static struct pxafb_mach_info palmtc_lcd_screen = {
.modes = palmtc_lcd_modes,
.num_modes = ARRAY_SIZE(palmtc_lcd_modes),
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
/******************************************************************************
* Machine init
******************************************************************************/
static struct platform_device *devices[] __initdata = {
&palmtc_backlight,
&palmtc_ucb1400_core,
&palmtc_keyboard,
&palmtc_pxa_keys,
&palmtc_flash,
};
static void __init palmtc_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
set_pxa_fb_info(&palmtc_lcd_screen);
pxa_set_mci_info(&palmtc_mci_platform_data);
pxa_set_udc_info(&palmtc_udc_info);
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&palmtc_ficp_platform_data);
platform_add_devices(devices, ARRAY_SIZE(devices));
};
MACHINE_START(PALMTC, "Palm Tungsten|C")
.phys_io = 0x40000000,
.boot_params = 0xa0000100,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.map_io = pxa_map_io,
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
.init_machine = palmtc_init
MACHINE_END

110
arch/arm/mach-pxa/palmte2.c
View File

@ -117,83 +117,11 @@ static unsigned long palmte2_pin_config[] __initdata = {
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
static int palmte2_mci_init(struct device *dev,
irq_handler_t palmte2_detect_int, void *data)
{
int err = 0;
/* Setup an interrupt for detecting card insert/remove events */
err = gpio_request(GPIO_NR_PALMTE2_SD_DETECT_N, "SD IRQ");
if (err)
goto err;
err = gpio_direction_input(GPIO_NR_PALMTE2_SD_DETECT_N);
if (err)
goto err2;
err = request_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N),
palmte2_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"SD/MMC card detect", data);
if (err) {
printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
__func__);
goto err2;
}
err = gpio_request(GPIO_NR_PALMTE2_SD_POWER, "SD_POWER");
if (err)
goto err3;
err = gpio_direction_output(GPIO_NR_PALMTE2_SD_POWER, 0);
if (err)
goto err4;
err = gpio_request(GPIO_NR_PALMTE2_SD_READONLY, "SD_READONLY");
if (err)
goto err4;
err = gpio_direction_input(GPIO_NR_PALMTE2_SD_READONLY);
if (err)
goto err5;
printk(KERN_DEBUG "%s: irq registered\n", __func__);
return 0;
err5:
gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
err4:
gpio_free(GPIO_NR_PALMTE2_SD_POWER);
err3:
free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
err2:
gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
err:
return err;
}
static void palmte2_mci_exit(struct device *dev, void *data)
{
gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
gpio_free(GPIO_NR_PALMTE2_SD_POWER);
free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
}
static void palmte2_mci_power(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data *p_d = dev->platform_data;
gpio_set_value(GPIO_NR_PALMTE2_SD_POWER, p_d->ocr_mask & (1 << vdd));
}
static int palmte2_mci_get_ro(struct device *dev)
{
return gpio_get_value(GPIO_NR_PALMTE2_SD_READONLY);
}
static struct pxamci_platform_data palmte2_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.setpower = palmte2_mci_power,
.get_ro = palmte2_mci_get_ro,
.init = palmte2_mci_init,
.exit = palmte2_mci_exit,
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.gpio_card_detect = GPIO_NR_PALMTE2_SD_DETECT_N,
.gpio_card_ro = GPIO_NR_PALMTE2_SD_READONLY,
.gpio_power = GPIO_NR_PALMTE2_SD_POWER,
};
/******************************************************************************
@ -287,35 +215,9 @@ static struct platform_device palmte2_backlight = {
/******************************************************************************
* IrDA
******************************************************************************/
static int palmte2_irda_startup(struct device *dev)
{
int err;
err = gpio_request(GPIO_NR_PALMTE2_IR_DISABLE, "IR DISABLE");
if (err)
goto err;
err = gpio_direction_output(GPIO_NR_PALMTE2_IR_DISABLE, 1);
if (err)
gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
err:
return err;
}
static void palmte2_irda_shutdown(struct device *dev)
{
gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
}
static void palmte2_irda_transceiver_mode(struct device *dev, int mode)
{
gpio_set_value(GPIO_NR_PALMTE2_IR_DISABLE, mode & IR_OFF);
pxa2xx_transceiver_mode(dev, mode);
}
static struct pxaficp_platform_data palmte2_ficp_platform_data = {
.startup = palmte2_irda_startup,
.shutdown = palmte2_irda_shutdown,
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
.transceiver_mode = palmte2_irda_transceiver_mode,
.gpio_pwdown = GPIO_NR_PALMTE2_IR_DISABLE,
.transceiver_cap = IR_SIRMODE | IR_OFF,
};
/******************************************************************************

Some files were not shown because too many files have changed in this diff Show More