ARM: mach-mx5/mx53_ard: Add support for i.MX53 ARD board

Signed-off-by: Andre Silva <andre.silva@freescale.com>
 Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit is contained in:
Andre Silva 2011-06-10 13:08:14 -03:00 committed by Sascha Hauer
parent 8b6c44f100
commit bd8978267d
4 changed files with 186 additions and 0 deletions

View File

@ -209,6 +209,14 @@ config MACH_MX53_LOCO
Include support for MX53 LOCO platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX53_ARD
bool "Support MX53 ARD platforms"
select SOC_IMX53
select IMX_HAVE_PLATFORM_IMX_UART
help
Include support for MX53 ARD platform. This includes specific
configurations for the board and its peripherals.
endif # ARCH_MX53_SUPPORTED
endif

View File

@ -12,6 +12,7 @@ obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o
obj-$(CONFIG_MACH_MX53_SMD) += board-mx53_smd.o
obj-$(CONFIG_MACH_MX53_LOCO) += board-mx53_loco.o
obj-$(CONFIG_MACH_MX53_ARD) += board-mx53_ard.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o

View File

@ -0,0 +1,176 @@
/*
* Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/smsc911x.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx53.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "crm_regs.h"
#include "devices-imx53.h"
#define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31)
static iomux_v3_cfg_t mx53_ard_pads[] = {
/* UART1 */
MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
/* WEIM for CS1 */
MX53_PAD_EIM_EB3__GPIO2_31, /* ETHERNET_INT_B */
MX53_PAD_EIM_D16__EMI_WEIM_D_16,
MX53_PAD_EIM_D17__EMI_WEIM_D_17,
MX53_PAD_EIM_D18__EMI_WEIM_D_18,
MX53_PAD_EIM_D19__EMI_WEIM_D_19,
MX53_PAD_EIM_D20__EMI_WEIM_D_20,
MX53_PAD_EIM_D21__EMI_WEIM_D_21,
MX53_PAD_EIM_D22__EMI_WEIM_D_22,
MX53_PAD_EIM_D23__EMI_WEIM_D_23,
MX53_PAD_EIM_D24__EMI_WEIM_D_24,
MX53_PAD_EIM_D25__EMI_WEIM_D_25,
MX53_PAD_EIM_D26__EMI_WEIM_D_26,
MX53_PAD_EIM_D27__EMI_WEIM_D_27,
MX53_PAD_EIM_D28__EMI_WEIM_D_28,
MX53_PAD_EIM_D29__EMI_WEIM_D_29,
MX53_PAD_EIM_D30__EMI_WEIM_D_30,
MX53_PAD_EIM_D31__EMI_WEIM_D_31,
MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
MX53_PAD_EIM_OE__EMI_WEIM_OE,
MX53_PAD_EIM_RW__EMI_WEIM_RW,
MX53_PAD_EIM_CS1__EMI_WEIM_CS_1,
};
static struct resource ard_smsc911x_resources[] = {
{
.start = MX53_CS1_64MB_BASE_ADDR,
.end = MX53_CS1_64MB_BASE_ADDR + SZ_32M - 1,
.flags = IORESOURCE_MEM,
},
{
.start = gpio_to_irq(ARD_ETHERNET_INT_B),
.end = gpio_to_irq(ARD_ETHERNET_INT_B),
.flags = IORESOURCE_IRQ,
},
};
struct smsc911x_platform_config ard_smsc911x_config = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.flags = SMSC911X_USE_32BIT,
};
static struct platform_device ard_smsc_lan9220_device = {
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(ard_smsc911x_resources),
.resource = ard_smsc911x_resources,
.dev = {
.platform_data = &ard_smsc911x_config,
},
};
static void __init mx53_ard_io_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
ARRAY_SIZE(mx53_ard_pads));
gpio_request(ARD_ETHERNET_INT_B, "eth-int-b");
gpio_direction_input(ARD_ETHERNET_INT_B);
}
/* Config CS1 settings for ethernet controller */
static int weim_cs_config(void)
{
u32 reg;
void __iomem *weim_base, *iomuxc_base;
weim_base = ioremap(MX53_WEIM_BASE_ADDR, SZ_4K);
if (!weim_base)
return -ENOMEM;
iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K);
if (!iomuxc_base)
return -ENOMEM;
/* CS1 timings for LAN9220 */
writel(0x20001, (weim_base + 0x18));
writel(0x0, (weim_base + 0x1C));
writel(0x16000202, (weim_base + 0x20));
writel(0x00000002, (weim_base + 0x24));
writel(0x16002082, (weim_base + 0x28));
writel(0x00000000, (weim_base + 0x2C));
writel(0x00000000, (weim_base + 0x90));
/* specify 64 MB on CS1 and CS0 on GPR1 */
reg = readl(iomuxc_base + 0x4);
reg &= ~0x3F;
reg |= 0x1B;
writel(reg, (iomuxc_base + 0x4));
iounmap(iomuxc_base);
iounmap(weim_base);
return 0;
}
static struct platform_device *devices[] __initdata = {
&ard_smsc_lan9220_device,
};
static void __init mx53_ard_board_init(void)
{
imx53_soc_init();
imx53_add_imx_uart(0, NULL);
mx53_ard_io_init();
weim_cs_config();
platform_add_devices(devices, ARRAY_SIZE(devices));
}
static void __init mx53_ard_timer_init(void)
{
mx53_clocks_init(32768, 24000000, 22579200, 0);
}
static struct sys_timer mx53_ard_timer = {
.init = mx53_ard_timer_init,
};
MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
.map_io = mx53_map_io,
.init_early = imx53_init_early,
.init_irq = mx53_init_irq,
.timer = &mx53_ard_timer,
.init_machine = mx53_ard_board_init,
MACHINE_END

View File

@ -117,6 +117,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
case MACH_TYPE_MX53_EVK:
case MACH_TYPE_MX53_LOCO:
case MACH_TYPE_MX53_SMD:
case MACH_TYPE_MX53_ARD:
uart_base = MX53_UART1_BASE_ADDR;
break;
default: