From 0cb3fcd72cc3e6dd88f0e769746d294e5e6bafa9 Mon Sep 17 00:00:00 2001 From: Bibek Basu Date: Wed, 9 Feb 2011 11:02:35 +0530 Subject: [PATCH 1/4] gpio: driver for 42 AB8500 GPIO pins To get rid of port expanders, the free GPIOs of ab8500 can be used. There are 42 GPIO pins. Out of which 16 are interrupt capable.This patch implements 16 virtual IRQ mapped to 16 interrupt capable AB8500 GPIOs. Signed-off-by: Bibek Basu Acked-by: Grant Likely [Renamed header file as per MFD structure] Signed-off-by: Linus Walleij --- drivers/gpio/Kconfig | 5 + drivers/gpio/Makefile | 1 + drivers/gpio/ab8500-gpio.c | 522 ++++++++++++++++++++++++++++++++ drivers/mfd/ab8500-core.c | 14 + drivers/mfd/ab8500-i2c.c | 2 +- include/linux/mfd/ab8500.h | 41 +++ include/linux/mfd/ab8500/gpio.h | 21 ++ 7 files changed, 605 insertions(+), 1 deletion(-) create mode 100644 drivers/gpio/ab8500-gpio.c create mode 100644 include/linux/mfd/ab8500/gpio.h diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index d8d0cda2641d..d3743204a7e9 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -414,4 +414,9 @@ config GPIO_JANZ_TTL This driver provides support for driving the pins in output mode only. Input mode is not supported. +config AB8500_GPIO + bool "ST-Ericsson AB8500 Mixed Signal Circuit gpio functions" + depends on AB8500_CORE + help + Select this to enable the AB8500 IC GPIO driver endif diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 3351cf87b0ed..becef5954356 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -42,3 +42,4 @@ obj-$(CONFIG_GPIO_JANZ_TTL) += janz-ttl.o obj-$(CONFIG_GPIO_SX150X) += sx150x.o obj-$(CONFIG_GPIO_VX855) += vx855_gpio.o obj-$(CONFIG_GPIO_ML_IOH) += ml_ioh_gpio.o +obj-$(CONFIG_AB8500_GPIO) += ab8500-gpio.o diff --git a/drivers/gpio/ab8500-gpio.c b/drivers/gpio/ab8500-gpio.c new file mode 100644 index 000000000000..e7b834d054b7 --- /dev/null +++ b/drivers/gpio/ab8500-gpio.c @@ -0,0 +1,522 @@ +/* + * Copyright (C) ST-Ericsson SA 2011 + * + * Author: BIBEK BASU + * License terms: GNU General Public License (GPL) version 2 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * GPIO registers offset + * Bank: 0x10 + */ +#define AB8500_GPIO_SEL1_REG 0x00 +#define AB8500_GPIO_SEL2_REG 0x01 +#define AB8500_GPIO_SEL3_REG 0x02 +#define AB8500_GPIO_SEL4_REG 0x03 +#define AB8500_GPIO_SEL5_REG 0x04 +#define AB8500_GPIO_SEL6_REG 0x05 + +#define AB8500_GPIO_DIR1_REG 0x10 +#define AB8500_GPIO_DIR2_REG 0x11 +#define AB8500_GPIO_DIR3_REG 0x12 +#define AB8500_GPIO_DIR4_REG 0x13 +#define AB8500_GPIO_DIR5_REG 0x14 +#define AB8500_GPIO_DIR6_REG 0x15 + +#define AB8500_GPIO_OUT1_REG 0x20 +#define AB8500_GPIO_OUT2_REG 0x21 +#define AB8500_GPIO_OUT3_REG 0x22 +#define AB8500_GPIO_OUT4_REG 0x23 +#define AB8500_GPIO_OUT5_REG 0x24 +#define AB8500_GPIO_OUT6_REG 0x25 + +#define AB8500_GPIO_PUD1_REG 0x30 +#define AB8500_GPIO_PUD2_REG 0x31 +#define AB8500_GPIO_PUD3_REG 0x32 +#define AB8500_GPIO_PUD4_REG 0x33 +#define AB8500_GPIO_PUD5_REG 0x34 +#define AB8500_GPIO_PUD6_REG 0x35 + +#define AB8500_GPIO_IN1_REG 0x40 +#define AB8500_GPIO_IN2_REG 0x41 +#define AB8500_GPIO_IN3_REG 0x42 +#define AB8500_GPIO_IN4_REG 0x43 +#define AB8500_GPIO_IN5_REG 0x44 +#define AB8500_GPIO_IN6_REG 0x45 +#define AB8500_GPIO_ALTFUN_REG 0x45 +#define ALTFUN_REG_INDEX 6 +#define AB8500_NUM_GPIO 42 +#define AB8500_NUM_VIR_GPIO_IRQ 16 + +enum ab8500_gpio_action { + NONE, + STARTUP, + SHUTDOWN, + MASK, + UNMASK +}; + +struct ab8500_gpio { + struct gpio_chip chip; + struct ab8500 *parent; + struct device *dev; + struct mutex lock; + u32 irq_base; + enum ab8500_gpio_action irq_action; + u16 rising; + u16 falling; +}; +/** + * to_ab8500_gpio() - get the pointer to ab8500_gpio + * @chip: Member of the structure ab8500_gpio + */ +static inline struct ab8500_gpio *to_ab8500_gpio(struct gpio_chip *chip) +{ + return container_of(chip, struct ab8500_gpio, chip); +} + +static int ab8500_gpio_set_bits(struct gpio_chip *chip, u8 reg, + unsigned offset, int val) +{ + struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); + u8 pos = offset % 8; + int ret; + + reg = reg + (offset / 8); + ret = abx500_mask_and_set_register_interruptible(ab8500_gpio->dev, + AB8500_MISC, reg, 1 << pos, val << pos); + if (ret < 0) + dev_err(ab8500_gpio->dev, "%s write failed\n", __func__); + return ret; +} +/** + * ab8500_gpio_get() - Get the particular GPIO value + * @chip: Gpio device + * @offset: GPIO number to read + */ +static int ab8500_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); + u8 mask = 1 << (offset % 8); + u8 reg = AB8500_GPIO_OUT1_REG + (offset / 8); + int ret; + u8 data; + ret = abx500_get_register_interruptible(ab8500_gpio->dev, AB8500_MISC, + reg, &data); + if (ret < 0) { + dev_err(ab8500_gpio->dev, "%s read failed\n", __func__); + return ret; + } + return (data & mask) >> (offset % 8); +} + +static void ab8500_gpio_set(struct gpio_chip *chip, unsigned offset, int val) +{ + struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); + int ret; + /* Write the data */ + ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, 1); + if (ret < 0) + dev_err(ab8500_gpio->dev, "%s write failed\n", __func__); +} + +static int ab8500_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int val) +{ + int ret; + /* set direction as output */ + ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 1); + if (ret < 0) + return ret; + /* disable pull down */ + ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG, offset, 1); + if (ret < 0) + return ret; + /* set the output as 1 or 0 */ + return ab8500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val); + +} + +static int ab8500_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + /* set the register as input */ + return ab8500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 0); +} + +static int ab8500_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + /* + * Only some GPIOs are interrupt capable, and they are + * organized in discontiguous clusters: + * + * GPIO6 to GPIO13 + * GPIO24 and GPIO25 + * GPIO36 to GPIO41 + */ + static struct ab8500_gpio_irq_cluster { + int start; + int end; + } clusters[] = { + {.start = 6, .end = 13}, + {.start = 24, .end = 25}, + {.start = 36, .end = 41}, + }; + struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); + int base = ab8500_gpio->irq_base; + int i; + + for (i = 0; i < ARRAY_SIZE(clusters); i++) { + struct ab8500_gpio_irq_cluster *cluster = &clusters[i]; + + if (offset >= cluster->start && offset <= cluster->end) + return base + offset - cluster->start; + + /* Advance by the number of gpios in this cluster */ + base += cluster->end - cluster->start + 1; + } + + return -EINVAL; +} + +static struct gpio_chip ab8500gpio_chip = { + .label = "ab8500_gpio", + .owner = THIS_MODULE, + .direction_input = ab8500_gpio_direction_input, + .get = ab8500_gpio_get, + .direction_output = ab8500_gpio_direction_output, + .set = ab8500_gpio_set, + .to_irq = ab8500_gpio_to_irq, +}; + +static unsigned int irq_to_rising(unsigned int irq) +{ + struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); + int offset = irq - ab8500_gpio->irq_base; + int new_irq = offset + AB8500_INT_GPIO6R + + ab8500_gpio->parent->irq_base; + return new_irq; +} + +static unsigned int irq_to_falling(unsigned int irq) +{ + struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); + int offset = irq - ab8500_gpio->irq_base; + int new_irq = offset + AB8500_INT_GPIO6F + + ab8500_gpio->parent->irq_base; + return new_irq; + +} + +static unsigned int rising_to_irq(unsigned int irq, void *dev) +{ + struct ab8500_gpio *ab8500_gpio = dev; + int offset = irq - AB8500_INT_GPIO6R + - ab8500_gpio->parent->irq_base ; + int new_irq = offset + ab8500_gpio->irq_base; + return new_irq; +} + +static unsigned int falling_to_irq(unsigned int irq, void *dev) +{ + struct ab8500_gpio *ab8500_gpio = dev; + int offset = irq - AB8500_INT_GPIO6F + - ab8500_gpio->parent->irq_base ; + int new_irq = offset + ab8500_gpio->irq_base; + return new_irq; + +} + +/* + * IRQ handler + */ + +static irqreturn_t handle_rising(int irq, void *dev) +{ + + handle_nested_irq(rising_to_irq(irq , dev)); + return IRQ_HANDLED; +} + +static irqreturn_t handle_falling(int irq, void *dev) +{ + + handle_nested_irq(falling_to_irq(irq, dev)); + return IRQ_HANDLED; +} + +static void ab8500_gpio_irq_lock(unsigned int irq) +{ + struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); + mutex_lock(&ab8500_gpio->lock); +} + +static void ab8500_gpio_irq_sync_unlock(unsigned int irq) +{ + struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); + int offset = irq - ab8500_gpio->irq_base; + bool rising = ab8500_gpio->rising & BIT(offset); + bool falling = ab8500_gpio->falling & BIT(offset); + int ret; + + switch (ab8500_gpio->irq_action) { + case STARTUP: + if (rising) + ret = request_threaded_irq(irq_to_rising(irq), + NULL, handle_rising, + IRQF_TRIGGER_RISING, + "ab8500-gpio-r", ab8500_gpio); + if (falling) + ret = request_threaded_irq(irq_to_falling(irq), + NULL, handle_falling, + IRQF_TRIGGER_FALLING, + "ab8500-gpio-f", ab8500_gpio); + break; + case SHUTDOWN: + if (rising) + free_irq(irq_to_rising(irq), ab8500_gpio); + if (falling) + free_irq(irq_to_falling(irq), ab8500_gpio); + break; + case MASK: + if (rising) + disable_irq(irq_to_rising(irq)); + if (falling) + disable_irq(irq_to_falling(irq)); + break; + case UNMASK: + if (rising) + enable_irq(irq_to_rising(irq)); + if (falling) + enable_irq(irq_to_falling(irq)); + break; + case NONE: + break; + } + ab8500_gpio->irq_action = NONE; + ab8500_gpio->rising &= ~(BIT(offset)); + ab8500_gpio->falling &= ~(BIT(offset)); + mutex_unlock(&ab8500_gpio->lock); +} + + +static void ab8500_gpio_irq_mask(unsigned int irq) +{ + struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); + ab8500_gpio->irq_action = MASK; +} + +static void ab8500_gpio_irq_unmask(unsigned int irq) +{ + struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); + ab8500_gpio->irq_action = UNMASK; +} + +static int ab8500_gpio_irq_set_type(unsigned int irq, unsigned int type) +{ + struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); + int offset = irq - ab8500_gpio->irq_base; + + if (type == IRQ_TYPE_EDGE_BOTH) { + ab8500_gpio->rising = BIT(offset); + ab8500_gpio->falling = BIT(offset); + } else if (type == IRQ_TYPE_EDGE_RISING) { + ab8500_gpio->rising = BIT(offset); + } else { + ab8500_gpio->falling = BIT(offset); + } + return 0; +} + +unsigned int ab8500_gpio_irq_startup(unsigned int irq) +{ + struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); + ab8500_gpio->irq_action = STARTUP; + return 0; +} + +void ab8500_gpio_irq_shutdown(unsigned int irq) +{ + struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); + ab8500_gpio->irq_action = SHUTDOWN; +} + +static struct irq_chip ab8500_gpio_irq_chip = { + .name = "ab8500-gpio", + .startup = ab8500_gpio_irq_startup, + .shutdown = ab8500_gpio_irq_shutdown, + .bus_lock = ab8500_gpio_irq_lock, + .bus_sync_unlock = ab8500_gpio_irq_sync_unlock, + .mask = ab8500_gpio_irq_mask, + .unmask = ab8500_gpio_irq_unmask, + .set_type = ab8500_gpio_irq_set_type, +}; + +static int ab8500_gpio_irq_init(struct ab8500_gpio *ab8500_gpio) +{ + u32 base = ab8500_gpio->irq_base; + int irq; + + for (irq = base; irq < base + AB8500_NUM_VIR_GPIO_IRQ ; irq++) { + set_irq_chip_data(irq, ab8500_gpio); + set_irq_chip_and_handler(irq, &ab8500_gpio_irq_chip, + handle_simple_irq); + set_irq_nested_thread(irq, 1); +#ifdef CONFIG_ARM + set_irq_flags(irq, IRQF_VALID); +#else + set_irq_noprobe(irq); +#endif + } + + return 0; +} + +static void ab8500_gpio_irq_remove(struct ab8500_gpio *ab8500_gpio) +{ + int base = ab8500_gpio->irq_base; + int irq; + + for (irq = base; irq < base + AB8500_NUM_VIR_GPIO_IRQ; irq++) { +#ifdef CONFIG_ARM + set_irq_flags(irq, 0); +#endif + set_irq_chip_and_handler(irq, NULL, NULL); + set_irq_chip_data(irq, NULL); + } +} + +static int __devinit ab8500_gpio_probe(struct platform_device *pdev) +{ + struct ab8500_platform_data *ab8500_pdata = + dev_get_platdata(pdev->dev.parent); + struct ab8500_gpio_platform_data *pdata; + struct ab8500_gpio *ab8500_gpio; + int ret; + int i; + + pdata = ab8500_pdata->gpio; + if (!pdata) { + dev_err(&pdev->dev, "gpio platform data missing\n"); + return -ENODEV; + } + + ab8500_gpio = kzalloc(sizeof(struct ab8500_gpio), GFP_KERNEL); + if (ab8500_gpio == NULL) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + ab8500_gpio->dev = &pdev->dev; + ab8500_gpio->parent = dev_get_drvdata(pdev->dev.parent); + ab8500_gpio->chip = ab8500gpio_chip; + ab8500_gpio->chip.ngpio = AB8500_NUM_GPIO; + ab8500_gpio->chip.dev = &pdev->dev; + ab8500_gpio->chip.base = pdata->gpio_base; + ab8500_gpio->irq_base = pdata->irq_base; + /* initialize the lock */ + mutex_init(&ab8500_gpio->lock); + /* + * AB8500 core will handle and clear the IRQ + * configre GPIO based on config-reg value. + * These values are for selecting the PINs as + * GPIO or alternate function + */ + for (i = AB8500_GPIO_SEL1_REG; i <= AB8500_GPIO_SEL6_REG; i++) { + ret = abx500_set_register_interruptible(ab8500_gpio->dev, + AB8500_MISC, i, + pdata->config_reg[i]); + if (ret < 0) + goto out_free; + } + ret = abx500_set_register_interruptible(ab8500_gpio->dev, AB8500_MISC, + AB8500_GPIO_ALTFUN_REG, + pdata->config_reg[ALTFUN_REG_INDEX]); + if (ret < 0) + goto out_free; + + ret = ab8500_gpio_irq_init(ab8500_gpio); + if (ret) + goto out_free; + ret = gpiochip_add(&ab8500_gpio->chip); + if (ret) { + dev_err(&pdev->dev, "unable to add gpiochip: %d\n", + ret); + goto out_rem_irq; + } + platform_set_drvdata(pdev, ab8500_gpio); + return 0; + +out_rem_irq: + ab8500_gpio_irq_remove(ab8500_gpio); +out_free: + mutex_destroy(&ab8500_gpio->lock); + kfree(ab8500_gpio); + return ret; +} + +/* + * ab8500_gpio_remove() - remove Ab8500-gpio driver + * @pdev : Platform device registered + */ +static int __devexit ab8500_gpio_remove(struct platform_device *pdev) +{ + struct ab8500_gpio *ab8500_gpio = platform_get_drvdata(pdev); + int ret; + + ret = gpiochip_remove(&ab8500_gpio->chip); + if (ret < 0) { + dev_err(ab8500_gpio->dev, "unable to remove gpiochip:\ + %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, NULL); + mutex_destroy(&ab8500_gpio->lock); + kfree(ab8500_gpio); + + return 0; +} + +static struct platform_driver ab8500_gpio_driver = { + .driver = { + .name = "ab8500-gpio", + .owner = THIS_MODULE, + }, + .probe = ab8500_gpio_probe, + .remove = __devexit_p(ab8500_gpio_remove), +}; + +static int __init ab8500_gpio_init(void) +{ + return platform_driver_register(&ab8500_gpio_driver); +} +arch_initcall(ab8500_gpio_init); + +static void __exit ab8500_gpio_exit(void) +{ + platform_driver_unregister(&ab8500_gpio_driver); +} +module_exit(ab8500_gpio_exit); + +MODULE_AUTHOR("BIBEK BASU "); +MODULE_DESCRIPTION("Driver allows to use AB8500 unused pins\ + to be used as GPIO"); +MODULE_ALIAS("AB8500 GPIO driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 62e33e2258d4..67d01c938284 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -362,6 +362,15 @@ static void ab8500_irq_remove(struct ab8500 *ab8500) } } +static struct resource ab8500_gpio_resources[] = { + { + .name = "GPIO_INT6", + .start = AB8500_INT_GPIO6R, + .end = AB8500_INT_GPIO41F, + .flags = IORESOURCE_IRQ, + } +}; + static struct resource ab8500_gpadc_resources[] = { { .name = "HW_CONV_END", @@ -595,6 +604,11 @@ static struct mfd_cell ab8500_devs[] = { { .name = "ab8500-regulator", }, + { + .name = "ab8500-gpio", + .num_resources = ARRAY_SIZE(ab8500_gpio_resources), + .resources = ab8500_gpio_resources, + }, { .name = "ab8500-gpadc", .num_resources = ARRAY_SIZE(ab8500_gpadc_resources), diff --git a/drivers/mfd/ab8500-i2c.c b/drivers/mfd/ab8500-i2c.c index 6820327adf4a..821e6b86afd2 100644 --- a/drivers/mfd/ab8500-i2c.c +++ b/drivers/mfd/ab8500-i2c.c @@ -97,7 +97,7 @@ static void __exit ab8500_i2c_exit(void) { platform_driver_unregister(&ab8500_i2c_driver); } -subsys_initcall(ab8500_i2c_init); +arch_initcall(ab8500_i2c_init); module_exit(ab8500_i2c_exit); MODULE_AUTHOR("Mattias WALLIN + * Licensed under GPLv2. + */ + +#ifndef _AB8500_GPIO_H +#define _AB8500_GPIO_H + +/* + * Platform data to register a block: only the initial gpio/irq number. + */ + +struct ab8500_gpio_platform_data { + int gpio_base; + u32 irq_base; + u8 config_reg[7]; +}; + +#endif /* _AB8500_GPIO_H */ From 3ef374a22bdf91fb3b4213200aadd054f81c3499 Mon Sep 17 00:00:00 2001 From: Bibek Basu Date: Tue, 15 Feb 2011 12:56:16 +0530 Subject: [PATCH 2/4] mach-ux500: board support for AB8500 GPIO driver This is the board support patch for ab8500 gpio driver on mach-ux500.Patch implements 16 virtual IRQ mapped to 16 interrupt capable AB8500 GPIOs. Signed-off-by: Bibek Basu [Modify for header file placement] Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500.c | 24 +++++++++++++++++++ arch/arm/mach-ux500/board-mop500.h | 4 ++++ .../include/mach/irqs-board-mop500.h | 15 ++++++++++-- 3 files changed, 41 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index d0076453d7ff..6ac0164db6e8 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -42,10 +43,33 @@ #include "board-mop500.h" #include "board-mop500-regulators.h" +static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { + .gpio_base = MOP500_AB8500_GPIO(0), + .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE, + /* config_reg is the initial configuration of ab8500 pins. + * The pins can be configured as GPIO or alt functions based + * on value present in GpioSel1 to GpioSel6 and AlternatFunction + * register. This is the array of 7 configuration settings. + * One has to compile time decide these settings. Below is the + * explaination of these setting + * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO + * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO + * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO + * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO + * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO + * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO + * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured + * as GPIO then this register selectes the alternate fucntions + */ + .config_reg = {0x00, 0x1E, 0x80, 0x01, + 0x7A, 0x00, 0x00}, +}; + static struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, .regulator = ab8500_regulators, .num_regulator = ARRAY_SIZE(ab8500_regulators), + .gpio = &ab8500_gpio_pdata, }; static struct resource ab8500_resources[] = { diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 56722f4be71b..03a31cc9b084 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -27,6 +27,10 @@ #define GPIO_BU21013_CS MOP500_EGPIO(13) #define GPIO_SDMMC_EN MOP500_EGPIO(17) #define GPIO_SDMMC_1V8_3V_SEL MOP500_EGPIO(18) +#define MOP500_EGPIO_END MOP500_EGPIO(24) + +/* GPIOs on the AB8500 mixed-signals circuit */ +#define MOP500_AB8500_GPIO(x) (MOP500_EGPIO_END + (x)) struct i2c_board_info; diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h index 7cdeb2af0ebb..97ef55f84934 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -35,9 +35,20 @@ #define MOP500_STMPE1601_IRQBASE MOP500_EGPIO_IRQ_END #define MOP500_STMPE1601_IRQ(x) (MOP500_STMPE1601_IRQBASE + (x)) -#define MOP500_NR_IRQS MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS) +#define MOP500_STMPE1601_IRQ_END \ + MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS) -#define MOP500_IRQ_END MOP500_NR_IRQS +/* AB8500 virtual gpio IRQ */ +#define AB8500_VIR_GPIO_NR_IRQS 16 + +#define MOP500_AB8500_VIR_GPIO_IRQ_BASE \ + MOP500_STMPE1601_IRQ_END +#define MOP500_AB8500_VIR_GPIO_IRQ_END \ + (MOP500_AB8500_VIR_GPIO_IRQ_BASE + AB8500_VIR_GPIO_NR_IRQS) + +#define MOP500_NR_IRQS MOP500_AB8500_VIR_GPIO_IRQ_END + +#define MOP500_IRQ_END MOP500_NR_IRQS #if MOP500_IRQ_END > IRQ_BOARD_END #undef IRQ_BOARD_END From dfa3a824de631e6833ffa9a7befc08186b027799 Mon Sep 17 00:00:00 2001 From: Bengt Jonsson Date: Wed, 9 Mar 2011 13:34:17 +0100 Subject: [PATCH 3/4] mach-ux500: provide ab8500 init vector This adds an ab8500 regulator initialization vector for the HREF/MOP500 series of boards. This also sets the display regulator to be on at boot so we don't loose our splash screen when the board comes up. Signed-off-by: Bengt Jonsson Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-regulators.c | 177 ++++++++++++++++++ arch/arm/mach-ux500/board-mop500.c | 2 + 2 files changed, 179 insertions(+) diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 875c91b2f8a4..d4f33ebaf637 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -62,6 +62,182 @@ static struct regulator_consumer_supply ab8500_vana_consumers[] = { REGULATOR_SUPPLY("vsmps2", "mcde.0"), }; +/* ab8500 regulator register initialization */ +struct ab8500_regulator_reg_init +ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { + /* + * VanaRequestCtrl = HP/LP depending on VxRequest + * VextSupply1RequestCtrl = HP/LP depending on VxRequest + */ + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0x00), + /* + * VextSupply2RequestCtrl = HP/LP depending on VxRequest + * VextSupply3RequestCtrl = HP/LP depending on VxRequest + * Vaux1RequestCtrl = HP/LP depending on VxRequest + * Vaux2RequestCtrl = HP/LP depending on VxRequest + */ + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0x00), + /* + * Vaux3RequestCtrl = HP/LP depending on VxRequest + * SwHPReq = Control through SWValid disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x00), + /* + * VanaSysClkReq1HPValid = disabled + * Vaux1SysClkReq1HPValid = disabled + * Vaux2SysClkReq1HPValid = disabled + * Vaux3SysClkReq1HPValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0x00), + /* + * VextSupply1SysClkReq1HPValid = disabled + * VextSupply2SysClkReq1HPValid = disabled + * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x40), + /* + * VanaHwHPReq1Valid = disabled + * Vaux1HwHPreq1Valid = disabled + * Vaux2HwHPReq1Valid = disabled + * Vaux3HwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0x00), + /* + * VextSupply1HwHPReq1Valid = disabled + * VextSupply2HwHPReq1Valid = disabled + * VextSupply3HwHPReq1Valid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x00), + /* + * VanaHwHPReq2Valid = disabled + * Vaux1HwHPReq2Valid = disabled + * Vaux2HwHPReq2Valid = disabled + * Vaux3HwHPReq2Valid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0x00), + /* + * VextSupply1HwHPReq2Valid = disabled + * VextSupply2HwHPReq2Valid = disabled + * VextSupply3HwHPReq2Valid = HWReq2 controlled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x04), + /* + * VanaSwHPReqValid = disabled + * Vaux1SwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0x00), + /* + * Vaux2SwHPReqValid = disabled + * Vaux3SwHPReqValid = disabled + * VextSupply1SwHPReqValid = disabled + * VextSupply2SwHPReqValid = disabled + * VextSupply3SwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x00), + /* + * SysClkReq2Valid1 = SysClkReq2 controlled + * SysClkReq3Valid1 = disabled + * SysClkReq4Valid1 = SysClkReq4 controlled + * SysClkReq5Valid1 = disabled + * SysClkReq6Valid1 = SysClkReq6 controlled + * SysClkReq7Valid1 = disabled + * SysClkReq8Valid1 = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0x2a), + /* + * SysClkReq2Valid2 = disabled + * SysClkReq3Valid2 = disabled + * SysClkReq4Valid2 = disabled + * SysClkReq5Valid2 = disabled + * SysClkReq6Valid2 = SysClkReq6 controlled + * SysClkReq7Valid2 = disabled + * SysClkReq8Valid2 = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0x20), + /* + * VTVoutEna = disabled + * Vintcore12Ena = disabled + * Vintcore12Sel = 1.25 V + * Vintcore12LP = inactive (HP) + * VTVoutLP = inactive (HP) + */ + INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0x10), + /* + * VaudioEna = disabled + * VdmicEna = disabled + * Vamic1Ena = disabled + * Vamic2Ena = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x00), + /* + * Vamic1_dzout = high-Z when Vamic1 is disabled + * Vamic2_dzout = high-Z when Vamic2 is disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x00), + /* + * VPll = Hw controlled + * VanaRegu = force off + */ + INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x02), + /* + * VrefDDREna = disabled + * VrefDDRSleepMode = inactive (no pulldown) + */ + INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x00), + /* + * VextSupply1Regu = HW control + * VextSupply2Regu = HW control + * VextSupply3Regu = HW control + * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 + * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 + */ + INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0x2a), + /* + * Vaux1Regu = force HP + * Vaux2Regu = force off + */ + INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x01), + /* + * Vaux3regu = force off + */ + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x00), + /* + * Vsmps1 = 1.15V + */ + INIT_REGULATOR_REGISTER(AB8500_VSMPS1SEL1, 0x24), + /* + * Vaux1Sel = 2.5 V + */ + INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x08), + /* + * Vaux2Sel = 2.9 V + */ + INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0d), + /* + * Vaux3Sel = 2.91 V + */ + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07), + /* + * VextSupply12LP = disabled (no LP) + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x00), + /* + * Vaux1Disch = short discharge time + * Vaux2Disch = short discharge time + * Vaux3Disch = short discharge time + * Vintcore12Disch = short discharge time + * VTVoutDisch = short discharge time + * VaudioDisch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0x00), + /* + * VanaDisch = short discharge time + * VdmicPullDownEna = pulldown disabled when Vdmic is disabled + * VdmicDisch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x00), +}; + /* AB8500 regulators */ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { /* supplies to the display/camera */ @@ -72,6 +248,7 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .max_uV = 2900000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, /* must be on for display */ }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), .consumer_supplies = ab8500_vaux1_consumers, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 6ac0164db6e8..a10abc7d8eee 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -67,6 +67,8 @@ static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { static struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, + .regulator_reg_init = ab8500_regulator_reg_init, + .num_regulator_reg_init = ARRAY_SIZE(ab8500_regulator_reg_init), .regulator = ab8500_regulators, .num_regulator = ARRAY_SIZE(ab8500_regulators), .gpio = &ab8500_gpio_pdata, From fe67dfc874da094bbbfbb73e74924d414b96105b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 7 Mar 2011 11:48:15 +0100 Subject: [PATCH 4/4] mach-ux500: configure board for the TPS61052 regulator v2 This registers the TPS61052 regulator to the ux500 MOP/HREF boards. Cc: Samuel Ortiz Cc: Liam Girdwood Cc: Mark Brown Cc: Ola Lilja Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Kconfig | 1 + arch/arm/mach-ux500/board-mop500-regulators.c | 24 +++++++++++++++++++ arch/arm/mach-ux500/board-mop500-regulators.h | 1 + arch/arm/mach-ux500/board-mop500.c | 23 +++++++++++++++++- 4 files changed, 48 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 203b986280f5..58626013aa32 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -23,6 +23,7 @@ menu "Ux500 target platform" config MACH_U8500 bool "U8500 Development platform" depends on UX500_SOC_DB8500 + select TPS6105X help Include support for the mop500 development platform. diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index d4f33ebaf637..9ed0f90cfe23 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -13,6 +13,30 @@ #include #include "board-mop500-regulators.h" +/* + * TPS61052 regulator + */ +static struct regulator_consumer_supply tps61052_vaudio_consumers[] = { + /* + * Boost converter supply to raise voltage on audio speaker, this + * is actually connected to three pins, VInVhfL (left amplifier) + * VInVhfR (right amplifier) and VIntDClassInt - all three must + * be connected to the same voltage. + */ + REGULATOR_SUPPLY("vintdclassint", "ab8500-codec.0"), +}; + +struct regulator_init_data tps61052_regulator = { + .constraints = { + .name = "vaudio-hf", + .min_uV = 4500000, + .max_uV = 4500000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(tps61052_vaudio_consumers), + .consumer_supplies = tps61052_vaudio_consumers, +}; + static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { /* External displays, connector on board 2v5 power supply */ REGULATOR_SUPPLY("vaux12v5", "mcde.0"), diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h index f979b892e4fa..94992158d962 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.h +++ b/arch/arm/mach-ux500/board-mop500-regulators.h @@ -17,5 +17,6 @@ extern struct ab8500_regulator_reg_init ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS]; extern struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS]; +extern struct regulator_init_data tps61052_regulator; #endif diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index a10abc7d8eee..dc8746d7826e 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -92,6 +93,15 @@ struct platform_device ab8500_device = { .resource = ab8500_resources, }; +/* + * TPS61052 + */ + +static struct tps6105x_platform_data mop500_tps61052_data = { + .mode = TPS6105X_MODE_VOLTAGE, + .regulator_data = &tps61052_regulator, +}; + /* * TC35892 */ @@ -162,7 +172,7 @@ static struct lp5521_platform_data __initdata lp5521_sec_data = { .clock_mode = LP5521_CLOCK_EXT, }; -static struct i2c_board_info mop500_i2c0_devices[] = { +static struct i2c_board_info __initdata mop500_i2c0_devices[] = { { I2C_BOARD_INFO("tc3589x", 0x42), .irq = NOMADIK_GPIO_TO_IRQ(217), @@ -170,6 +180,14 @@ static struct i2c_board_info mop500_i2c0_devices[] = { }, }; +/* I2C0 devices only available prior to HREFv60 */ +static struct i2c_board_info __initdata mop500_i2c0_old_devices[] = { + { + I2C_BOARD_INFO("tps61052", 0x33), + .platform_data = &mop500_tps61052_data, + }, +}; + static struct i2c_board_info __initdata mop500_i2c2_devices[] = { { /* lp5521 LED driver, 1st device */ @@ -432,6 +450,9 @@ static void __init mop500_init_machine(void) i2c_register_board_info(0, mop500_i2c0_devices, ARRAY_SIZE(mop500_i2c0_devices)); + if (!machine_is_hrefv60()) + i2c_register_board_info(0, mop500_i2c0_old_devices, + ARRAY_SIZE(mop500_i2c0_old_devices)); i2c_register_board_info(2, mop500_i2c2_devices, ARRAY_SIZE(mop500_i2c2_devices)); }