From ed84fad5002c00dfb318f797dbf591320eebc1c0 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 8 Jun 2007 15:14:27 +0200 Subject: [PATCH 1/8] serverworks: remove crappy code Remove crappy code noticed by Linus, see http://lkml.org/lkml/2007/5/23/476 for details. While at it simplify logic a bit. There should be no functionality changes caused by this patch. Cc: Linus Torvalds Cc: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/serverworks.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index 47bcd91c9b5f..b04c99059c05 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/serverworks.c Version 0.9 Mar 4 2007 + * linux/drivers/ide/pci/serverworks.c Version 0.10 Jun 2 2007 * * Copyright (C) 1998-2000 Michel Aubry * Copyright (C) 1998-2000 Andrzej Krzysztofowicz @@ -170,7 +170,6 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed) if (!drive->init_speed) { u8 dma_stat = inb(hwif->dma_status); -dma_pio: if (((ultra_enable << (7-drive->dn) & 0x80) == 0x80) && ((dma_stat & (1<<(5+unit))) == (1<<(5+unit)))) { drive->current_speed = drive->init_speed = XFER_UDMA_0 + udma_modes[(ultra_timing >> (4*unit)) & ~(0xF0)]; @@ -179,7 +178,6 @@ dma_pio: ((dma_stat&(1<<(5+unit)))==(1<<(5+unit)))) { u8 dmaspeed = dma_timing; - dma_timing &= ~0xFFU; if ((dmaspeed & 0x20) == 0x20) dmaspeed = XFER_MW_DMA_2; else if ((dmaspeed & 0x21) == 0x21) @@ -190,10 +188,11 @@ dma_pio: goto dma_pio; drive->current_speed = drive->init_speed = dmaspeed; return 0; - } else if (pio_timing) { + } +dma_pio: + if (pio_timing) { u8 piospeed = pio_timing; - pio_timing &= ~0xFFU; if ((piospeed & 0x20) == 0x20) piospeed = XFER_PIO_4; else if ((piospeed & 0x22) == 0x22) @@ -214,8 +213,8 @@ dma_pio: oem_setup_failed: - pio_timing &= ~0xFFU; - dma_timing &= ~0xFFU; + pio_timing = 0; + dma_timing = 0; ultra_timing &= ~(0x0F << (4*unit)); ultra_enable &= ~(0x01 << drive->dn); csb5_pio &= ~(0x0F << (4*drive->dn)); From 1abb8a8b841354e7a09ba2009376f0a6368b5cec Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 8 Jun 2007 15:14:28 +0200 Subject: [PATCH 2/8] serverworks: fix CSB6 tuning logic Problem noticed by Joe Zbiciak, see http://kerneltrap.org/node/8252 for details. On CSB6 the driver is using BIOS settings and not programming DMA/PIO timings itself. However the logic was completely broken and resulted in wrong timings being silently allowed (instead of being corrected by the driver). This bug would explain some data corruption/timeout issues with Serverworks MegaIDE in RAID mode that Alan Cox has fixed recently with: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=2074a106f52b6371885afbd714e929d60d0e3f64 For 2.6.23 we may be better off with completely switching the driver to always programming timings (libata pata_serverworks.c driver is doing things this way and there were no problems reported so far) but for 2.6.22 lets fix the bug in the simplest and the least intrusive way. Cc: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/serverworks.c | 40 +++++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 13 deletions(-) diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index b04c99059c05..d9c4fd1ae996 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/serverworks.c Version 0.10 Jun 2 2007 + * linux/drivers/ide/pci/serverworks.c Version 0.11 Jun 2 2007 * * Copyright (C) 1998-2000 Michel Aubry * Copyright (C) 1998-2000 Andrzej Krzysztofowicz @@ -176,35 +176,49 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed) return 0; } else if ((dma_timing) && ((dma_stat&(1<<(5+unit)))==(1<<(5+unit)))) { - u8 dmaspeed = dma_timing; + u8 dmaspeed; - if ((dmaspeed & 0x20) == 0x20) + switch (dma_timing & 0x77) { + case 0x20: dmaspeed = XFER_MW_DMA_2; - else if ((dmaspeed & 0x21) == 0x21) + break; + case 0x21: dmaspeed = XFER_MW_DMA_1; - else if ((dmaspeed & 0x77) == 0x77) + break; + case 0x77: dmaspeed = XFER_MW_DMA_0; - else + break; + default: goto dma_pio; + } + drive->current_speed = drive->init_speed = dmaspeed; return 0; } dma_pio: if (pio_timing) { - u8 piospeed = pio_timing; + u8 piospeed; - if ((piospeed & 0x20) == 0x20) + switch (pio_timing & 0x7f) { + case 0x20: piospeed = XFER_PIO_4; - else if ((piospeed & 0x22) == 0x22) + break; + case 0x22: piospeed = XFER_PIO_3; - else if ((piospeed & 0x34) == 0x34) + break; + case 0x34: piospeed = XFER_PIO_2; - else if ((piospeed & 0x47) == 0x47) + break; + case 0x47: piospeed = XFER_PIO_1; - else if ((piospeed & 0x5d) == 0x5d) + break; + case 0x5d: piospeed = XFER_PIO_0; - else + break; + default: goto oem_setup_failed; + } + drive->current_speed = drive->init_speed = piospeed; return 0; } From 0380dad45e4f5a606025cc4df2a2cd26af08796b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 8 Jun 2007 15:14:29 +0200 Subject: [PATCH 3/8] it821x: RAID mode fixes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The DMA support for RAID mode broke after: commit 71ef51cc1756d1c56b57c70e7cc27a3559c81ee6 Author: Jens Axboe Date:   Fri Jul 28 09:02:17 2006 +0200     [PATCH] it821x: fix ide dma setup bug     Only enable dma for a valid speed setting.     Signed-off-by: Jens Axboe commit 0a8348d08677ad77ee353f96eb8745c693a05a13 Author: Jens Axboe Date:   Fri Jul 28 08:58:26 2006 +0200     [PATCH] ide: if the id fields looks screwy, disable DMA     It's the safer choice. Originally due to a bug in itx821x, but a     generally sound thing to do.     Signed-off-by: Jens Axboe However it worked by pure luck before Jens' fixes: bogus ide_dma_enable() usage in it821x driver combined with loosy check in ide_dma_verbose() allowed the hardware to operate in DMA mode. When these problems were fixed the DMA support broke... The source root for the regression turned out to be that the it821x.c code was clearing too much of id->field_valid. The IDE core code was using the original value of id->field_valid to do the tuning but later DMA got disabled in ide_dma_verbose() because of the incorrect id->field_valid fixup. Fix it. While at it: * Do fixup() after probing the drives but before tuning them (which is also OK w.r.t. ide_undecoded_slave() fixup). This change fixes device IDENTIFY data to be consistent before/after the tuning and allows us to remove extra re-tuning of drives from it821x_fixups(). * Fake MWDMA0 enabled/supported bits in IDENTIFY data if the device has DMA capable bit set (this is just to tell the IDE core that DMA is supported since it821x firmware takes care of DMA mode programming). * Don't touch timing registers and don't program transfer modes on devices et all when in RAID mode - depend solely on firmware to do the tuning (as suggested by Alan Cox and done in libata pata_it821x driver). Thanks for testing the patch goes out to Thomas Kuther. Cc: Thomas Kuther Cc: Alan Cox Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 12 ++++++------ drivers/ide/pci/it821x.c | 34 ++++++++++++++++++---------------- 2 files changed, 24 insertions(+), 22 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 3cebed77f55d..41bfa4d21ab6 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -717,7 +717,7 @@ EXPORT_SYMBOL_GPL(ide_undecoded_slave); * This routine only knows how to look for drive units 0 and 1 * on an interface, so any setting of MAX_DRIVES > 2 won't work here. */ -static void probe_hwif(ide_hwif_t *hwif) +static void probe_hwif(ide_hwif_t *hwif, void (*fixup)(ide_hwif_t *hwif)) { unsigned int unit; unsigned long flags; @@ -820,6 +820,9 @@ static void probe_hwif(ide_hwif_t *hwif) return; } + if (fixup) + fixup(hwif); + for (unit = 0; unit < MAX_DRIVES; ++unit) { ide_drive_t *drive = &hwif->drives[unit]; @@ -874,10 +877,7 @@ static int hwif_init(ide_hwif_t *hwif); int probe_hwif_init_with_fixup(ide_hwif_t *hwif, void (*fixup)(ide_hwif_t *hwif)) { - probe_hwif(hwif); - - if (fixup) - fixup(hwif); + probe_hwif(hwif, fixup); if (!hwif_init(hwif)) { printk(KERN_INFO "%s: failed to initialize IDE interface\n", @@ -1404,7 +1404,7 @@ int ideprobe_init (void) for (index = 0; index < MAX_HWIFS; ++index) if (probe[index]) - probe_hwif(&ide_hwifs[index]); + probe_hwif(&ide_hwifs[index], NULL); for (index = 0; index < MAX_HWIFS; ++index) if (probe[index]) hwif_init(&ide_hwifs[index]); diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index 5faaff87d580..4bd4bf02e917 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -1,6 +1,6 @@ /* - * linux/drivers/ide/pci/it821x.c Version 0.10 Mar 10 2007 + * linux/drivers/ide/pci/it821x.c Version 0.15 Jun 2 2007 * * Copyright (C) 2004 Red Hat * Copyright (C) 2007 Bartlomiej Zolnierkiewicz @@ -262,7 +262,7 @@ static int it821x_tunepio(ide_drive_t *drive, u8 set_pio) } if (itdev->smart) - goto set_drive_speed; + return 0; /* We prefer 66Mhz clock for PIO 0-3, don't care for PIO4 */ itdev->want[unit][1] = pio_want[set_pio]; @@ -271,7 +271,6 @@ static int it821x_tunepio(ide_drive_t *drive, u8 set_pio) it821x_clock_strategy(drive); it821x_program(drive, itdev->pio[unit]); -set_drive_speed: return ide_config_drive_speed(drive, XFER_PIO_0 + set_pio); } @@ -455,12 +454,12 @@ static int it821x_tune_chipset (ide_drive_t *drive, byte xferspeed) default: return 1; } + + return ide_config_drive_speed(drive, speed); } - /* - * In smart mode the clocking is done by the host controller - * snooping the mode we picked. The rest of it is not our problem - */ - return ide_config_drive_speed(drive, speed); + + /* don't touch anything in the smart mode */ + return 0; } /** @@ -559,17 +558,10 @@ static void __devinit it821x_fixups(ide_hwif_t *hwif) if(idbits[129] != 1) printk("(%dK stripe)", idbits[146]); printk(".\n"); - /* Now the core code will have wrongly decided no DMA - so we need to fix this */ - hwif->dma_off_quietly(drive); -#ifdef CONFIG_IDEDMA_ONLYDISK - if (drive->media == ide_disk) -#endif - ide_set_dma(drive); } else { /* Non RAID volume. Fixups to stop the core code doing unsupported things */ - id->field_valid &= 1; + id->field_valid &= 3; id->queue_depth = 0; id->command_set_1 = 0; id->command_set_2 &= 0xC400; @@ -584,6 +576,16 @@ static void __devinit it821x_fixups(ide_hwif_t *hwif) printk(KERN_INFO "%s: Performing identify fixups.\n", drive->name); } + + /* + * Set MWDMA0 mode as enabled/support - just to tell + * IDE core that DMA is supported (it821x hardware + * takes care of DMA mode programming). + */ + if (id->capability & 1) { + id->dma_mword |= 0x0101; + drive->current_speed = XFER_MW_DMA_0; + } } } From 0d2157f78d17fcee17791f54959e67cc0af0da74 Mon Sep 17 00:00:00 2001 From: Lee Trager Date: Fri, 8 Jun 2007 15:14:30 +0200 Subject: [PATCH 4/8] ide: HPA detect from resume Currently when system which have HPA require HPA to be detected and disabled upon resume from RAM or disk. The current IDE drivers do not do this nor does libata (obviously it since it doesn't support HPA yet). I have implemented this into the current IDE drivers and it has been tested by many others since 7/15/2006 in bug number 6840: http://bugzilla.kernel.org/show_bug.cgi?id=6840 and it has been confirmed to work fine with no problems. bart: added drv != NULL check to generic_ide_suspend() From: Lee Trager Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 12 ++++++++++++ drivers/ide/ide.c | 9 ++++++++- include/linux/ide.h | 1 + 3 files changed, 21 insertions(+), 1 deletion(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 7fff773f2df7..dc2175c81f5e 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -1037,6 +1037,17 @@ static void ide_disk_release(struct kref *kref) static int ide_disk_probe(ide_drive_t *drive); +/* + * On HPA drives the capacity needs to be + * reinitilized on resume otherwise the disk + * can not be used and a hard reset is required + */ +static void ide_disk_resume(ide_drive_t *drive) +{ + if (idedisk_supports_hpa(drive->id)) + init_idedisk_capacity(drive); +} + static void ide_device_shutdown(ide_drive_t *drive) { #ifdef CONFIG_ALPHA @@ -1071,6 +1082,7 @@ static ide_driver_t idedisk_driver = { }, .probe = ide_disk_probe, .remove = ide_disk_remove, + .resume = ide_disk_resume, .shutdown = ide_device_shutdown, .version = IDEDISK_VERSION, .media = ide_disk, diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 6002713a20a1..0af0d1614f75 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -1010,9 +1010,11 @@ static int generic_ide_resume(struct device *dev) { ide_drive_t *drive = dev->driver_data; ide_hwif_t *hwif = HWIF(drive); + ide_driver_t *drv = to_ide_driver(dev->driver); struct request rq; struct request_pm_state rqpm; ide_task_t args; + int err; /* Call ACPI _STM only once */ if (!(drive->dn % 2)) @@ -1029,7 +1031,12 @@ static int generic_ide_resume(struct device *dev) rqpm.pm_step = ide_pm_state_start_resume; rqpm.pm_state = PM_EVENT_ON; - return ide_do_drive_cmd(drive, &rq, ide_head_wait); + err = ide_do_drive_cmd(drive, &rq, ide_head_wait); + + if (err == 0 && drv && drv->resume) + drv->resume(drive); + + return err; } int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev, diff --git a/include/linux/ide.h b/include/linux/ide.h index 07aba87d369d..1e365acdd369 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1001,6 +1001,7 @@ struct ide_driver_s { struct device_driver gen_driver; int (*probe)(ide_drive_t *); void (*remove)(ide_drive_t *); + void (*resume)(ide_drive_t *); void (*shutdown)(ide_drive_t *); #ifdef CONFIG_IDE_PROC_FS ide_proc_entry_t *proc; From ea30759643b423933ced48acdd78e5299f05295b Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 8 Jun 2007 15:14:31 +0200 Subject: [PATCH 5/8] ide: generic IDE PCI driver, add another device exception generic IDE PCI driver, add another device exception This device is char device and is grabbed by generic ide driver: 00:0b.0 Class ffff: National Semiconductor Corporation 87410 IDE (rev ff) (prog-if ff) Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Disallow generic IDE PCI driver to grab it by adding next condition. Also consolidate exceptions to one bigger 'switch (dev->vendor)'. Signed-off-by: Jiri Slaby Cc: Ingo Korb Cc: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/generic.c | 37 +++++++++++++++++++++++-------------- 1 file changed, 23 insertions(+), 14 deletions(-) diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c index f2c5a141ca10..0d51a11e81da 100644 --- a/drivers/ide/pci/generic.c +++ b/drivers/ide/pci/generic.c @@ -198,32 +198,41 @@ static ide_pci_device_t generic_chipsets[] __devinitdata = { static int __devinit generic_init_one(struct pci_dev *dev, const struct pci_device_id *id) { ide_pci_device_t *d = &generic_chipsets[id->driver_data]; - u16 command; int ret = -ENODEV; /* Don't use the generic entry unless instructed to do so */ if (id->driver_data == 0 && ide_generic_all == 0) goto out; - if (dev->vendor == PCI_VENDOR_ID_UMC && - dev->device == PCI_DEVICE_ID_UMC_UM8886A && - (!(PCI_FUNC(dev->devfn) & 1))) - goto out; /* UM8886A/BF pair */ - - if (dev->vendor == PCI_VENDOR_ID_OPTI && - dev->device == PCI_DEVICE_ID_OPTI_82C558 && - (!(PCI_FUNC(dev->devfn) & 1))) - goto out; - - if (dev->vendor == PCI_VENDOR_ID_JMICRON) { - if (dev->device != PCI_DEVICE_ID_JMICRON_JMB368 && PCI_FUNC(dev->devfn) != 1) + switch (dev->vendor) { + case PCI_VENDOR_ID_UMC: + if (dev->device == PCI_DEVICE_ID_UMC_UM8886A && + !(PCI_FUNC(dev->devfn) & 1)) + goto out; /* UM8886A/BF pair */ + break; + case PCI_VENDOR_ID_OPTI: + if (dev->device == PCI_DEVICE_ID_OPTI_82C558 && + !(PCI_FUNC(dev->devfn) & 1)) goto out; + break; + case PCI_VENDOR_ID_JMICRON: + if (dev->device != PCI_DEVICE_ID_JMICRON_JMB368 && + PCI_FUNC(dev->devfn) != 1) + goto out; + break; + case PCI_VENDOR_ID_NS: + if (dev->device == PCI_DEVICE_ID_NS_87410 && + (dev->class >> 8) != PCI_CLASS_STORAGE_IDE) + goto out; + break; } if (dev->vendor != PCI_VENDOR_ID_JMICRON) { + u16 command; pci_read_config_word(dev, PCI_COMMAND, &command); if (!(command & PCI_COMMAND_IO)) { - printk(KERN_INFO "Skipping disabled %s IDE controller.\n", d->name); + printk(KERN_INFO "Skipping disabled %s IDE " + "controller.\n", d->name); goto out; } } From 278978e953a35a2ddf27f197003b29da54e31908 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 8 Jun 2007 15:14:32 +0200 Subject: [PATCH 6/8] hpt366: disallow Ultra133 for HPT374 Eliminate UltraATA/133 support for HPT374 -- the chip isn't capable of this mode according to the manual, and doesn't even seem to tolerate 66 MHz DPLL clock... Signed-off-by: Sergei Shtylyov Cc: Geller Sandor Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/hpt366.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index fcbc5605b38e..ce8a5449a574 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/hpt366.c Version 1.03 May 4, 2007 + * linux/drivers/ide/pci/hpt366.c Version 1.04 Jun 4, 2007 * * Copyright (C) 1999-2003 Andre Hedrick * Portions Copyright (C) 2001 Sun Microsystems, Inc. @@ -106,7 +106,8 @@ * switch to calculating PCI clock frequency based on the chip's base DPLL * frequency * - switch to using the DPLL clock and enable UltraATA/133 mode by default on - * anything newer than HPT370/A + * anything newer than HPT370/A (except HPT374 that is not capable of this + * mode according to the manual) * - fold PCI clock detection and DPLL setup code into init_chipset_hpt366(), * also fixing the interchanged 25/40 MHz PCI clock cases for HPT36x chips; * unify HPT36x/37x timing setup code and the speedproc handlers by joining @@ -365,7 +366,6 @@ static u32 sixty_six_base_hpt37x[] = { }; #define HPT366_DEBUG_DRIVE_INFO 0 -#define HPT374_ALLOW_ATA133_6 1 #define HPT371_ALLOW_ATA133_6 1 #define HPT302_ALLOW_ATA133_6 1 #define HPT372_ALLOW_ATA133_6 1 @@ -450,7 +450,7 @@ static struct hpt_info hpt370a __devinitdata = { static struct hpt_info hpt374 __devinitdata = { .chip_type = HPT374, - .max_mode = HPT374_ALLOW_ATA133_6 ? 4 : 3, + .max_mode = 3, .dpll_clk = 48, .settings = hpt37x_settings }; From 8da725dd94fda144802dc06b956c720eb77cfd75 Mon Sep 17 00:00:00 2001 From: Peer Chen Date: Fri, 8 Jun 2007 15:14:32 +0200 Subject: [PATCH 7/8] Add the PATA controller device ID to pci_ids.h for MCP73/MCP77. Add the PATA controller device ID to pci_ids.h for MCP73/MCP77. Signed-off-by: Peer Chen Cc: Alan Cox , Cc: Andrew Morton Cc: Jeff Garzik Cc: Tejun Heo Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/pci_ids.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 6a115cffea34..9a03b47da603 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1233,6 +1233,8 @@ #define PCI_DEVICE_ID_NVIDIA_NVENET_26 0x054E #define PCI_DEVICE_ID_NVIDIA_NVENET_27 0x054F #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE 0x0560 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE 0x056C +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE 0x0759 #define PCI_VENDOR_ID_IMS 0x10e0 #define PCI_DEVICE_ID_IMS_TT128 0x9128 From c1183a3345f2e553fa0907a453cbb311c7e1698c Mon Sep 17 00:00:00 2001 From: Peer Chen Date: Fri, 8 Jun 2007 15:14:32 +0200 Subject: [PATCH 8/8] ide: Add the MCP73/77 support to PATA driver Add the MCP73/MCP77 support to PATA driver. bart: Added amd74xx_chipsets[] and amd_pci_tbl[] entries. bart: Bumped driver version. Signed-off-by: Peer Chen Cc: Alan Cox , Cc: Andrew Morton Cc: Jeff Garzik Cc: Tejun Heo Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/amd74xx.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index becb1a5648b0..9db1be826e80 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -1,5 +1,5 @@ /* - * Version 2.13 + * Version 2.15 * * AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04 * IDE driver for Linux. @@ -76,6 +76,8 @@ static struct amd_ide_chip { { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, 0x50, AMD_UDMA_133 }, { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, 0x50, AMD_UDMA_133 }, { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, 0x50, AMD_UDMA_133 }, + { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE, 0x50, AMD_UDMA_133 }, + { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE, 0x50, AMD_UDMA_133 }, { PCI_DEVICE_ID_AMD_CS5536_IDE, 0x40, AMD_UDMA_100 }, { 0 } }; @@ -494,7 +496,9 @@ static ide_pci_device_t amd74xx_chipsets[] __devinitdata = { /* 17 */ DECLARE_NV_DEV("NFORCE-MCP61"), /* 18 */ DECLARE_NV_DEV("NFORCE-MCP65"), /* 19 */ DECLARE_NV_DEV("NFORCE-MCP67"), - /* 20 */ DECLARE_AMD_DEV("AMD5536"), + /* 20 */ DECLARE_NV_DEV("NFORCE-MCP73"), + /* 21 */ DECLARE_NV_DEV("NFORCE-MCP77"), + /* 22 */ DECLARE_AMD_DEV("AMD5536"), }; static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id) @@ -534,7 +538,9 @@ static struct pci_device_id amd74xx_pci_tbl[] = { { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17 }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 18 }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19 }, - { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 20 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 20 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 21 }, + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 22 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);