mirror of
https://github.com/torvalds/linux.git
synced 2024-12-02 00:51:44 +00:00
hwmon: (pwm-fan) Switch regulator dynamically
This adds the enable attribute which is used to select if zero PWM duty means to switch off regulator and PWM or to keep them enabled but at inactive PWM output level. Depending on the select enable mode, turn off the regulator and PWM if the PWM duty is zero, or keep them enabled. This is especially important for fan using inverted PWM signal polarity. Having regulator supplied and PWM disabled, some PWM controllers provide the active, rather than inactive signal. With this change the shutdown as well as suspend/resume paths require modifcations as well. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20220914153137.613982-6-alexander.stein@ew.tq-group.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Alexander Stein
Guenter Roeck
parent
9db6e7f500
commit
b99152d4f0
@ -18,3 +18,15 @@ the hwmon's sysfs interface.
|
||||
|
||||
The fan rotation speed returned via the optional 'fan1_input' is extrapolated
|
||||
from the sampled interrupts from the tachometer signal within 1 second.
|
||||
|
||||
The driver provides the following sensor accesses in sysfs:
|
||||
|
||||
=============== ======= =======================================================
|
||||
fan1_input ro fan tachometer speed in RPM
|
||||
pwm1_enable rw keep enable mode, defines behaviour when pwm1=0
|
||||
0 -> disable pwm and regulator
|
||||
1 -> enable pwm; if pwm==0, disable pwm, keep regulator enabled
|
||||
2 -> enable pwm; if pwm==0, keep pwm and regulator enabled
|
||||
3 -> enable pwm; if pwm==0, disable pwm and regulator
|
||||
pwm1 rw relative speed (0-255), 255=max. speed.
|
||||
=============== ======= =======================================================
|
||||
|
||||
@ -28,6 +28,13 @@ struct pwm_fan_tach {
|
||||
u8 pulses_per_revolution;
|
||||
};
|
||||
|
||||
enum pwm_fan_enable_mode {
|
||||
pwm_off_reg_off,
|
||||
pwm_disable_reg_enable,
|
||||
pwm_enable_reg_enable,
|
||||
pwm_disable_reg_disable,
|
||||
};
|
||||
|
||||
struct pwm_fan_ctx {
|
||||
struct device *dev;
|
||||
|
||||
@ -35,6 +42,7 @@ struct pwm_fan_ctx {
|
||||
struct pwm_device *pwm;
|
||||
struct pwm_state pwm_state;
|
||||
struct regulator *reg_en;
|
||||
enum pwm_fan_enable_mode enable_mode;
|
||||
bool regulator_enabled;
|
||||
bool enabled;
|
||||
|
||||
@ -86,6 +94,29 @@ static void sample_timer(struct timer_list *t)
|
||||
mod_timer(&ctx->rpm_timer, jiffies + HZ);
|
||||
}
|
||||
|
||||
static void pwm_fan_enable_mode_2_state(int enable_mode,
|
||||
struct pwm_state *state,
|
||||
bool *enable_regulator)
|
||||
{
|
||||
switch (enable_mode) {
|
||||
case pwm_disable_reg_enable:
|
||||
/* disable pwm, keep regulator enabled */
|
||||
state->enabled = false;
|
||||
*enable_regulator = true;
|
||||
break;
|
||||
case pwm_enable_reg_enable:
|
||||
/* keep pwm and regulator enabled */
|
||||
state->enabled = true;
|
||||
*enable_regulator = true;
|
||||
break;
|
||||
case pwm_off_reg_off:
|
||||
case pwm_disable_reg_disable:
|
||||
/* disable pwm and regulator */
|
||||
state->enabled = false;
|
||||
*enable_regulator = false;
|
||||
}
|
||||
}
|
||||
|
||||
static int pwm_fan_switch_power(struct pwm_fan_ctx *ctx, bool on)
|
||||
{
|
||||
int ret = 0;
|
||||
@ -113,26 +144,41 @@ static int pwm_fan_power_on(struct pwm_fan_ctx *ctx)
|
||||
if (ctx->enabled)
|
||||
return 0;
|
||||
|
||||
ret = pwm_fan_switch_power(ctx, true);
|
||||
if (ret < 0) {
|
||||
dev_err(ctx->dev, "failed to enable power supply\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
state->enabled = true;
|
||||
ret = pwm_apply_state(ctx->pwm, state);
|
||||
if (ret) {
|
||||
dev_err(ctx->dev, "failed to enable PWM\n");
|
||||
return ret;
|
||||
goto disable_regulator;
|
||||
}
|
||||
|
||||
ctx->enabled = true;
|
||||
|
||||
return 0;
|
||||
|
||||
disable_regulator:
|
||||
pwm_fan_switch_power(ctx, false);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int pwm_fan_power_off(struct pwm_fan_ctx *ctx)
|
||||
{
|
||||
struct pwm_state *state = &ctx->pwm_state;
|
||||
bool enable_regulator = false;
|
||||
int ret;
|
||||
|
||||
if (!ctx->enabled)
|
||||
return 0;
|
||||
|
||||
pwm_fan_enable_mode_2_state(ctx->enable_mode,
|
||||
state,
|
||||
&enable_regulator);
|
||||
|
||||
state->enabled = false;
|
||||
state->duty_cycle = 0;
|
||||
ret = pwm_apply_state(ctx->pwm, state);
|
||||
@ -141,6 +187,8 @@ static int pwm_fan_power_off(struct pwm_fan_ctx *ctx)
|
||||
return ret;
|
||||
}
|
||||
|
||||
pwm_fan_switch_power(ctx, enable_regulator);
|
||||
|
||||
ctx->enabled = false;
|
||||
|
||||
return 0;
|
||||
@ -153,6 +201,10 @@ static int __set_pwm(struct pwm_fan_ctx *ctx, unsigned long pwm)
|
||||
int ret = 0;
|
||||
|
||||
if (pwm > 0) {
|
||||
if (ctx->enable_mode == pwm_off_reg_off)
|
||||
/* pwm-fan hard disabled */
|
||||
return 0;
|
||||
|
||||
period = state->period;
|
||||
state->duty_cycle = DIV_ROUND_UP(pwm * (period - 1), MAX_PWM);
|
||||
ret = pwm_apply_state(ctx->pwm, state);
|
||||
@ -190,20 +242,76 @@ static void pwm_fan_update_state(struct pwm_fan_ctx *ctx, unsigned long pwm)
|
||||
ctx->pwm_fan_state = i;
|
||||
}
|
||||
|
||||
static int pwm_fan_update_enable(struct pwm_fan_ctx *ctx, long val)
|
||||
{
|
||||
int ret = 0;
|
||||
int old_val;
|
||||
|
||||
mutex_lock(&ctx->lock);
|
||||
|
||||
if (ctx->enable_mode == val)
|
||||
goto out;
|
||||
|
||||
old_val = ctx->enable_mode;
|
||||
ctx->enable_mode = val;
|
||||
|
||||
if (val == 0) {
|
||||
/* Disable pwm-fan unconditionally */
|
||||
ret = __set_pwm(ctx, 0);
|
||||
if (ret)
|
||||
ctx->enable_mode = old_val;
|
||||
pwm_fan_update_state(ctx, 0);
|
||||
} else {
|
||||
/*
|
||||
* Change PWM and/or regulator state if currently disabled
|
||||
* Nothing to do if currently enabled
|
||||
*/
|
||||
if (!ctx->enabled) {
|
||||
struct pwm_state *state = &ctx->pwm_state;
|
||||
bool enable_regulator = false;
|
||||
|
||||
state->duty_cycle = 0;
|
||||
pwm_fan_enable_mode_2_state(val,
|
||||
state,
|
||||
&enable_regulator);
|
||||
|
||||
pwm_apply_state(ctx->pwm, state);
|
||||
pwm_fan_switch_power(ctx, enable_regulator);
|
||||
pwm_fan_update_state(ctx, 0);
|
||||
}
|
||||
}
|
||||
out:
|
||||
mutex_unlock(&ctx->lock);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int pwm_fan_write(struct device *dev, enum hwmon_sensor_types type,
|
||||
u32 attr, int channel, long val)
|
||||
{
|
||||
struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
|
||||
int ret;
|
||||
|
||||
if (val < 0 || val > MAX_PWM)
|
||||
return -EINVAL;
|
||||
switch (attr) {
|
||||
case hwmon_pwm_input:
|
||||
if (val < 0 || val > MAX_PWM)
|
||||
return -EINVAL;
|
||||
ret = set_pwm(ctx, val);
|
||||
if (ret)
|
||||
return ret;
|
||||
pwm_fan_update_state(ctx, val);
|
||||
break;
|
||||
case hwmon_pwm_enable:
|
||||
if (val < 0 || val > 3)
|
||||
ret = -EINVAL;
|
||||
else
|
||||
ret = pwm_fan_update_enable(ctx, val);
|
||||
|
||||
ret = set_pwm(ctx, val);
|
||||
if (ret)
|
||||
return ret;
|
||||
default:
|
||||
return -EOPNOTSUPP;
|
||||
}
|
||||
|
||||
pwm_fan_update_state(ctx, val);
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -214,9 +322,15 @@ static int pwm_fan_read(struct device *dev, enum hwmon_sensor_types type,
|
||||
|
||||
switch (type) {
|
||||
case hwmon_pwm:
|
||||
*val = ctx->pwm_value;
|
||||
return 0;
|
||||
|
||||
switch (attr) {
|
||||
case hwmon_pwm_input:
|
||||
*val = ctx->pwm_value;
|
||||
return 0;
|
||||
case hwmon_pwm_enable:
|
||||
*val = ctx->enable_mode;
|
||||
return 0;
|
||||
}
|
||||
return -EOPNOTSUPP;
|
||||
case hwmon_fan:
|
||||
*val = ctx->tachs[channel].rpm;
|
||||
return 0;
|
||||
@ -345,18 +459,14 @@ static int pwm_fan_of_get_cooling_data(struct device *dev,
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void pwm_fan_regulator_disable(void *data)
|
||||
{
|
||||
pwm_fan_switch_power(data, false);
|
||||
}
|
||||
|
||||
static void pwm_fan_pwm_disable(void *__ctx)
|
||||
static void pwm_fan_cleanup(void *__ctx)
|
||||
{
|
||||
struct pwm_fan_ctx *ctx = __ctx;
|
||||
|
||||
ctx->pwm_state.enabled = false;
|
||||
pwm_apply_state(ctx->pwm, &ctx->pwm_state);
|
||||
del_timer_sync(&ctx->rpm_timer);
|
||||
/* Switch off everything */
|
||||
ctx->enable_mode = pwm_disable_reg_disable;
|
||||
pwm_fan_power_off(ctx);
|
||||
}
|
||||
|
||||
static int pwm_fan_probe(struct platform_device *pdev)
|
||||
@ -390,16 +500,6 @@ static int pwm_fan_probe(struct platform_device *pdev)
|
||||
return PTR_ERR(ctx->reg_en);
|
||||
|
||||
ctx->reg_en = NULL;
|
||||
} else {
|
||||
ret = pwm_fan_switch_power(ctx, true);
|
||||
if (ret) {
|
||||
dev_err(dev, "Failed to enable fan supply: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
ret = devm_add_action_or_reset(dev, pwm_fan_regulator_disable,
|
||||
ctx);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
pwm_init_state(ctx->pwm, &ctx->pwm_state);
|
||||
@ -414,14 +514,19 @@ static int pwm_fan_probe(struct platform_device *pdev)
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* Set duty cycle to maximum allowed and enable PWM output */
|
||||
ctx->enable_mode = pwm_disable_reg_enable;
|
||||
|
||||
/*
|
||||
* Set duty cycle to maximum allowed and enable PWM output as well as
|
||||
* the regulator. In case of error nothing is changed
|
||||
*/
|
||||
ret = set_pwm(ctx, MAX_PWM);
|
||||
if (ret) {
|
||||
dev_err(dev, "Failed to configure PWM: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
timer_setup(&ctx->rpm_timer, sample_timer, 0);
|
||||
ret = devm_add_action_or_reset(dev, pwm_fan_pwm_disable, ctx);
|
||||
ret = devm_add_action_or_reset(dev, pwm_fan_cleanup, ctx);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
@ -453,7 +558,7 @@ static int pwm_fan_probe(struct platform_device *pdev)
|
||||
if (!channels)
|
||||
return -ENOMEM;
|
||||
|
||||
channels[0] = HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT);
|
||||
channels[0] = HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT | HWMON_PWM_ENABLE);
|
||||
|
||||
for (i = 0; i < ctx->tach_count; i++) {
|
||||
struct pwm_fan_tach *tach = &ctx->tachs[i];
|
||||
@ -527,57 +632,26 @@ static int pwm_fan_probe(struct platform_device *pdev)
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int pwm_fan_disable(struct device *dev)
|
||||
{
|
||||
struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
|
||||
int ret;
|
||||
|
||||
if (ctx->pwm_value) {
|
||||
/* keep ctx->pwm_state unmodified for pwm_fan_resume() */
|
||||
struct pwm_state state = ctx->pwm_state;
|
||||
|
||||
state.duty_cycle = 0;
|
||||
state.enabled = false;
|
||||
ret = pwm_apply_state(ctx->pwm, &state);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = pwm_fan_switch_power(ctx, false);
|
||||
if (ret) {
|
||||
dev_err(dev, "Failed to disable fan supply: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void pwm_fan_shutdown(struct platform_device *pdev)
|
||||
{
|
||||
pwm_fan_disable(&pdev->dev);
|
||||
struct pwm_fan_ctx *ctx = platform_get_drvdata(pdev);
|
||||
|
||||
pwm_fan_cleanup(ctx);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM_SLEEP
|
||||
static int pwm_fan_suspend(struct device *dev)
|
||||
{
|
||||
return pwm_fan_disable(dev);
|
||||
struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
|
||||
|
||||
return pwm_fan_power_off(ctx);
|
||||
}
|
||||
|
||||
static int pwm_fan_resume(struct device *dev)
|
||||
{
|
||||
struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
|
||||
int ret;
|
||||
|
||||
ret = pwm_fan_switch_power(ctx, true);
|
||||
if (ret) {
|
||||
dev_err(dev, "Failed to enable fan supply: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (ctx->pwm_value == 0)
|
||||
return 0;
|
||||
|
||||
return pwm_apply_state(ctx->pwm, &ctx->pwm_state);
|
||||
return set_pwm(ctx, ctx->pwm_value);
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user