mirror of
https://github.com/torvalds/linux.git
synced 2024-11-26 22:21:42 +00:00
power: supply: rt5033_charger: Add RT5033 charger device driver
This patch adds device driver of Richtek RT5033 PMIC. The driver supports switching charger. rt5033 charger provides three charging modes. The charging modes are pre-charge mode, fast charge mode and constant voltage mode. They vary in charge rate, the charge parameters can be controlled by i2c interface. Tested-by: Raymond Hackley <raymondhackley@protonmail.com> Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/9556d4ebb30fd321e37aa0eb343554122e4720c9.1684182964.git.jahau@rocketmail.com
This commit is contained in:
Jakob Hauser
Lee Jones
parent
3d89761210
commit
b7653853d5
@ -766,6 +766,14 @@ config BATTERY_RT5033
|
||||
The fuelgauge calculates and determines the battery state of charge
|
||||
according to battery open circuit voltage.
|
||||
|
||||
config CHARGER_RT5033
|
||||
tristate "RT5033 battery charger support"
|
||||
depends on MFD_RT5033
|
||||
help
|
||||
This adds support for battery charger in Richtek RT5033 PMIC.
|
||||
The device supports pre-charge mode, fast charge mode and
|
||||
constant voltage mode.
|
||||
|
||||
config CHARGER_RT9455
|
||||
tristate "Richtek RT9455 battery charger driver"
|
||||
depends on I2C
|
||||
|
||||
@ -54,6 +54,7 @@ obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o
|
||||
obj-$(CONFIG_BATTERY_MAX17042) += max17042_battery.o
|
||||
obj-$(CONFIG_BATTERY_MAX1721X) += max1721x_battery.o
|
||||
obj-$(CONFIG_BATTERY_RT5033) += rt5033_battery.o
|
||||
obj-$(CONFIG_CHARGER_RT5033) += rt5033_charger.o
|
||||
obj-$(CONFIG_CHARGER_RT9455) += rt9455_charger.o
|
||||
obj-$(CONFIG_CHARGER_RT9467) += rt9467-charger.o
|
||||
obj-$(CONFIG_CHARGER_RT9471) += rt9471.o
|
||||
|
||||
472
drivers/power/supply/rt5033_charger.c
Normal file
472
drivers/power/supply/rt5033_charger.c
Normal file
@ -0,0 +1,472 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Battery charger driver for RT5033
|
||||
*
|
||||
* Copyright (C) 2014 Samsung Electronics, Co., Ltd.
|
||||
* Author: Beomho Seo <beomho.seo@samsung.com>
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/power_supply.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/mfd/rt5033-private.h>
|
||||
|
||||
struct rt5033_charger_data {
|
||||
unsigned int pre_uamp;
|
||||
unsigned int pre_uvolt;
|
||||
unsigned int const_uvolt;
|
||||
unsigned int eoc_uamp;
|
||||
unsigned int fast_uamp;
|
||||
};
|
||||
|
||||
struct rt5033_charger {
|
||||
struct device *dev;
|
||||
struct regmap *regmap;
|
||||
struct power_supply *psy;
|
||||
struct rt5033_charger_data *chg;
|
||||
};
|
||||
|
||||
static int rt5033_get_charger_state(struct rt5033_charger *charger)
|
||||
{
|
||||
struct regmap *regmap = charger->regmap;
|
||||
unsigned int reg_data;
|
||||
int state;
|
||||
|
||||
if (!regmap)
|
||||
return POWER_SUPPLY_STATUS_UNKNOWN;
|
||||
|
||||
regmap_read(regmap, RT5033_REG_CHG_STAT, ®_data);
|
||||
|
||||
switch (reg_data & RT5033_CHG_STAT_MASK) {
|
||||
case RT5033_CHG_STAT_DISCHARGING:
|
||||
state = POWER_SUPPLY_STATUS_DISCHARGING;
|
||||
break;
|
||||
case RT5033_CHG_STAT_CHARGING:
|
||||
state = POWER_SUPPLY_STATUS_CHARGING;
|
||||
break;
|
||||
case RT5033_CHG_STAT_FULL:
|
||||
state = POWER_SUPPLY_STATUS_FULL;
|
||||
break;
|
||||
case RT5033_CHG_STAT_NOT_CHARGING:
|
||||
state = POWER_SUPPLY_STATUS_NOT_CHARGING;
|
||||
break;
|
||||
default:
|
||||
state = POWER_SUPPLY_STATUS_UNKNOWN;
|
||||
}
|
||||
|
||||
return state;
|
||||
}
|
||||
|
||||
static int rt5033_get_charger_type(struct rt5033_charger *charger)
|
||||
{
|
||||
struct regmap *regmap = charger->regmap;
|
||||
unsigned int reg_data;
|
||||
int state;
|
||||
|
||||
regmap_read(regmap, RT5033_REG_CHG_STAT, ®_data);
|
||||
|
||||
switch (reg_data & RT5033_CHG_STAT_TYPE_MASK) {
|
||||
case RT5033_CHG_STAT_TYPE_FAST:
|
||||
state = POWER_SUPPLY_CHARGE_TYPE_FAST;
|
||||
break;
|
||||
case RT5033_CHG_STAT_TYPE_PRE:
|
||||
state = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
|
||||
break;
|
||||
default:
|
||||
state = POWER_SUPPLY_CHARGE_TYPE_NONE;
|
||||
}
|
||||
|
||||
return state;
|
||||
}
|
||||
|
||||
static int rt5033_get_charger_current_limit(struct rt5033_charger *charger)
|
||||
{
|
||||
struct regmap *regmap = charger->regmap;
|
||||
unsigned int state, reg_data, data;
|
||||
|
||||
regmap_read(regmap, RT5033_REG_CHG_CTRL5, ®_data);
|
||||
|
||||
state = (reg_data & RT5033_CHGCTRL5_ICHG_MASK)
|
||||
>> RT5033_CHGCTRL5_ICHG_SHIFT;
|
||||
|
||||
data = RT5033_CHARGER_FAST_CURRENT_MIN +
|
||||
RT5033_CHARGER_FAST_CURRENT_STEP_NUM * state;
|
||||
|
||||
return data;
|
||||
}
|
||||
|
||||
static int rt5033_get_charger_const_voltage(struct rt5033_charger *charger)
|
||||
{
|
||||
struct regmap *regmap = charger->regmap;
|
||||
unsigned int state, reg_data, data;
|
||||
|
||||
regmap_read(regmap, RT5033_REG_CHG_CTRL2, ®_data);
|
||||
|
||||
state = (reg_data & RT5033_CHGCTRL2_CV_MASK)
|
||||
>> RT5033_CHGCTRL2_CV_SHIFT;
|
||||
|
||||
data = RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN +
|
||||
RT5033_CHARGER_CONST_VOLTAGE_STEP_NUM * state;
|
||||
|
||||
return data;
|
||||
}
|
||||
|
||||
static inline int rt5033_init_const_charge(struct rt5033_charger *charger)
|
||||
{
|
||||
struct rt5033_charger_data *chg = charger->chg;
|
||||
int ret;
|
||||
unsigned int val;
|
||||
u8 reg_data;
|
||||
|
||||
/* Set constant voltage mode */
|
||||
if (chg->const_uvolt < RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN ||
|
||||
chg->const_uvolt > RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX) {
|
||||
dev_err(charger->dev,
|
||||
"Value 'constant-charge-voltage-max-microvolt' out of range\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (chg->const_uvolt == RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN)
|
||||
reg_data = 0x00;
|
||||
else if (chg->const_uvolt == RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX)
|
||||
reg_data = RT5033_CV_MAX_VOLTAGE;
|
||||
else {
|
||||
val = chg->const_uvolt;
|
||||
val -= RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN;
|
||||
val /= RT5033_CHARGER_CONST_VOLTAGE_STEP_NUM;
|
||||
reg_data = val;
|
||||
}
|
||||
|
||||
ret = regmap_update_bits(charger->regmap, RT5033_REG_CHG_CTRL2,
|
||||
RT5033_CHGCTRL2_CV_MASK,
|
||||
reg_data << RT5033_CHGCTRL2_CV_SHIFT);
|
||||
if (ret) {
|
||||
dev_err(charger->dev, "Failed regmap update\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* Set end of charge current */
|
||||
if (chg->eoc_uamp < RT5033_CHARGER_EOC_MIN ||
|
||||
chg->eoc_uamp > RT5033_CHARGER_EOC_MAX) {
|
||||
dev_err(charger->dev,
|
||||
"Value 'charge-term-current-microamp' out of range\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (chg->eoc_uamp == RT5033_CHARGER_EOC_MIN)
|
||||
reg_data = 0x01;
|
||||
else if (chg->eoc_uamp == RT5033_CHARGER_EOC_MAX)
|
||||
reg_data = 0x07;
|
||||
else {
|
||||
val = chg->eoc_uamp;
|
||||
if (val < RT5033_CHARGER_EOC_REF) {
|
||||
val -= RT5033_CHARGER_EOC_MIN;
|
||||
val /= RT5033_CHARGER_EOC_STEP_NUM1;
|
||||
reg_data = 0x01 + val;
|
||||
} else if (val > RT5033_CHARGER_EOC_REF) {
|
||||
val -= RT5033_CHARGER_EOC_REF;
|
||||
val /= RT5033_CHARGER_EOC_STEP_NUM2;
|
||||
reg_data = 0x04 + val;
|
||||
} else {
|
||||
reg_data = 0x04;
|
||||
}
|
||||
}
|
||||
|
||||
ret = regmap_update_bits(charger->regmap, RT5033_REG_CHG_CTRL4,
|
||||
RT5033_CHGCTRL4_EOC_MASK, reg_data);
|
||||
if (ret) {
|
||||
dev_err(charger->dev, "Failed regmap update\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static inline int rt5033_init_fast_charge(struct rt5033_charger *charger)
|
||||
{
|
||||
struct rt5033_charger_data *chg = charger->chg;
|
||||
int ret;
|
||||
unsigned int val;
|
||||
u8 reg_data;
|
||||
|
||||
/* Set limit input current */
|
||||
ret = regmap_update_bits(charger->regmap, RT5033_REG_CHG_CTRL1,
|
||||
RT5033_CHGCTRL1_IAICR_MASK, RT5033_AICR_2000_MODE);
|
||||
if (ret) {
|
||||
dev_err(charger->dev, "Failed regmap update\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* Set fast-charge mode charging current */
|
||||
if (chg->fast_uamp < RT5033_CHARGER_FAST_CURRENT_MIN ||
|
||||
chg->fast_uamp > RT5033_CHARGER_FAST_CURRENT_MAX) {
|
||||
dev_err(charger->dev,
|
||||
"Value 'constant-charge-current-max-microamp' out of range\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (chg->fast_uamp == RT5033_CHARGER_FAST_CURRENT_MIN)
|
||||
reg_data = 0x00;
|
||||
else if (chg->fast_uamp == RT5033_CHARGER_FAST_CURRENT_MAX)
|
||||
reg_data = RT5033_CHG_MAX_CURRENT;
|
||||
else {
|
||||
val = chg->fast_uamp;
|
||||
val -= RT5033_CHARGER_FAST_CURRENT_MIN;
|
||||
val /= RT5033_CHARGER_FAST_CURRENT_STEP_NUM;
|
||||
reg_data = val;
|
||||
}
|
||||
|
||||
ret = regmap_update_bits(charger->regmap, RT5033_REG_CHG_CTRL5,
|
||||
RT5033_CHGCTRL5_ICHG_MASK,
|
||||
reg_data << RT5033_CHGCTRL5_ICHG_SHIFT);
|
||||
if (ret) {
|
||||
dev_err(charger->dev, "Failed regmap update\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static inline int rt5033_init_pre_charge(struct rt5033_charger *charger)
|
||||
{
|
||||
struct rt5033_charger_data *chg = charger->chg;
|
||||
int ret;
|
||||
unsigned int val;
|
||||
u8 reg_data;
|
||||
|
||||
/* Set pre-charge threshold voltage */
|
||||
if (chg->pre_uvolt < RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MIN ||
|
||||
chg->pre_uvolt > RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MAX) {
|
||||
dev_err(charger->dev,
|
||||
"Value 'precharge-upper-limit-microvolt' out of range\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (chg->pre_uvolt == RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MIN)
|
||||
reg_data = 0x00;
|
||||
else if (chg->pre_uvolt == RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MAX)
|
||||
reg_data = 0x0f;
|
||||
else {
|
||||
val = chg->pre_uvolt;
|
||||
val -= RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MIN;
|
||||
val /= RT5033_CHARGER_PRE_THRESHOLD_STEP_NUM;
|
||||
reg_data = val;
|
||||
}
|
||||
|
||||
ret = regmap_update_bits(charger->regmap, RT5033_REG_CHG_CTRL5,
|
||||
RT5033_CHGCTRL5_VPREC_MASK, reg_data);
|
||||
if (ret) {
|
||||
dev_err(charger->dev, "Failed regmap update\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* Set pre-charge mode charging current */
|
||||
if (chg->pre_uamp < RT5033_CHARGER_PRE_CURRENT_LIMIT_MIN ||
|
||||
chg->pre_uamp > RT5033_CHARGER_PRE_CURRENT_LIMIT_MAX) {
|
||||
dev_err(charger->dev,
|
||||
"Value 'precharge-current-microamp' out of range\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (chg->pre_uamp == RT5033_CHARGER_PRE_CURRENT_LIMIT_MIN)
|
||||
reg_data = 0x00;
|
||||
else if (chg->pre_uamp == RT5033_CHARGER_PRE_CURRENT_LIMIT_MAX)
|
||||
reg_data = RT5033_CHG_MAX_PRE_CURRENT;
|
||||
else {
|
||||
val = chg->pre_uamp;
|
||||
val -= RT5033_CHARGER_PRE_CURRENT_LIMIT_MIN;
|
||||
val /= RT5033_CHARGER_PRE_CURRENT_STEP_NUM;
|
||||
reg_data = val;
|
||||
}
|
||||
|
||||
ret = regmap_update_bits(charger->regmap, RT5033_REG_CHG_CTRL4,
|
||||
RT5033_CHGCTRL4_IPREC_MASK,
|
||||
reg_data << RT5033_CHGCTRL4_IPREC_SHIFT);
|
||||
if (ret) {
|
||||
dev_err(charger->dev, "Failed regmap update\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int rt5033_charger_reg_init(struct rt5033_charger *charger)
|
||||
{
|
||||
int ret = 0;
|
||||
|
||||
/* Enable charging termination */
|
||||
ret = regmap_update_bits(charger->regmap, RT5033_REG_CHG_CTRL1,
|
||||
RT5033_CHGCTRL1_TE_EN_MASK, RT5033_TE_ENABLE);
|
||||
if (ret) {
|
||||
dev_err(charger->dev, "Failed to enable charging termination.\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/*
|
||||
* Disable minimum input voltage regulation (MIVR), this improves
|
||||
* the charging performance.
|
||||
*/
|
||||
ret = regmap_update_bits(charger->regmap, RT5033_REG_CHG_CTRL4,
|
||||
RT5033_CHGCTRL4_MIVR_MASK, RT5033_CHARGER_MIVR_DISABLE);
|
||||
if (ret) {
|
||||
dev_err(charger->dev, "Failed to disable MIVR.\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
ret = rt5033_init_pre_charge(charger);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = rt5033_init_fast_charge(charger);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = rt5033_init_const_charge(charger);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static enum power_supply_property rt5033_charger_props[] = {
|
||||
POWER_SUPPLY_PROP_STATUS,
|
||||
POWER_SUPPLY_PROP_CHARGE_TYPE,
|
||||
POWER_SUPPLY_PROP_CURRENT_MAX,
|
||||
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
|
||||
POWER_SUPPLY_PROP_MODEL_NAME,
|
||||
POWER_SUPPLY_PROP_MANUFACTURER,
|
||||
POWER_SUPPLY_PROP_ONLINE,
|
||||
};
|
||||
|
||||
static int rt5033_charger_get_property(struct power_supply *psy,
|
||||
enum power_supply_property psp,
|
||||
union power_supply_propval *val)
|
||||
{
|
||||
struct rt5033_charger *charger = power_supply_get_drvdata(psy);
|
||||
|
||||
switch (psp) {
|
||||
case POWER_SUPPLY_PROP_STATUS:
|
||||
val->intval = rt5033_get_charger_state(charger);
|
||||
break;
|
||||
case POWER_SUPPLY_PROP_CHARGE_TYPE:
|
||||
val->intval = rt5033_get_charger_type(charger);
|
||||
break;
|
||||
case POWER_SUPPLY_PROP_CURRENT_MAX:
|
||||
val->intval = rt5033_get_charger_current_limit(charger);
|
||||
break;
|
||||
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
|
||||
val->intval = rt5033_get_charger_const_voltage(charger);
|
||||
break;
|
||||
case POWER_SUPPLY_PROP_MODEL_NAME:
|
||||
val->strval = RT5033_CHARGER_MODEL;
|
||||
break;
|
||||
case POWER_SUPPLY_PROP_MANUFACTURER:
|
||||
val->strval = RT5033_MANUFACTURER;
|
||||
break;
|
||||
case POWER_SUPPLY_PROP_ONLINE:
|
||||
val->intval = (rt5033_get_charger_state(charger) ==
|
||||
POWER_SUPPLY_STATUS_CHARGING);
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct rt5033_charger_data *rt5033_charger_dt_init(
|
||||
struct rt5033_charger *charger)
|
||||
{
|
||||
struct rt5033_charger_data *chg;
|
||||
struct power_supply_battery_info *info;
|
||||
int ret;
|
||||
|
||||
chg = devm_kzalloc(charger->dev, sizeof(*chg), GFP_KERNEL);
|
||||
if (!chg)
|
||||
return ERR_PTR(-ENOMEM);
|
||||
|
||||
ret = power_supply_get_battery_info(charger->psy, &info);
|
||||
if (ret)
|
||||
return ERR_PTR(dev_err_probe(charger->dev, -EINVAL,
|
||||
"missing battery info\n"));
|
||||
|
||||
/* Assign data. Validity will be checked in the init functions. */
|
||||
chg->pre_uamp = info->precharge_current_ua;
|
||||
chg->fast_uamp = info->constant_charge_current_max_ua;
|
||||
chg->eoc_uamp = info->charge_term_current_ua;
|
||||
chg->pre_uvolt = info->precharge_voltage_max_uv;
|
||||
chg->const_uvolt = info->constant_charge_voltage_max_uv;
|
||||
|
||||
return chg;
|
||||
}
|
||||
|
||||
static const struct power_supply_desc rt5033_charger_desc = {
|
||||
.name = "rt5033-charger",
|
||||
.type = POWER_SUPPLY_TYPE_USB,
|
||||
.properties = rt5033_charger_props,
|
||||
.num_properties = ARRAY_SIZE(rt5033_charger_props),
|
||||
.get_property = rt5033_charger_get_property,
|
||||
};
|
||||
|
||||
static int rt5033_charger_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct rt5033_charger *charger;
|
||||
struct power_supply_config psy_cfg = {};
|
||||
int ret;
|
||||
|
||||
charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
|
||||
if (!charger)
|
||||
return -ENOMEM;
|
||||
|
||||
platform_set_drvdata(pdev, charger);
|
||||
charger->dev = &pdev->dev;
|
||||
charger->regmap = dev_get_regmap(pdev->dev.parent, NULL);
|
||||
|
||||
psy_cfg.of_node = pdev->dev.of_node;
|
||||
psy_cfg.drv_data = charger;
|
||||
|
||||
charger->psy = devm_power_supply_register(&pdev->dev,
|
||||
&rt5033_charger_desc,
|
||||
&psy_cfg);
|
||||
if (IS_ERR(charger->psy))
|
||||
return dev_err_probe(&pdev->dev, PTR_ERR(charger->psy),
|
||||
"Failed to register power supply\n");
|
||||
|
||||
charger->chg = rt5033_charger_dt_init(charger);
|
||||
if (IS_ERR_OR_NULL(charger->chg))
|
||||
return PTR_ERR(charger->chg);
|
||||
|
||||
ret = rt5033_charger_reg_init(charger);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct platform_device_id rt5033_charger_id[] = {
|
||||
{ "rt5033-charger", },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(platform, rt5033_charger_id);
|
||||
|
||||
static const struct of_device_id rt5033_charger_of_match[] = {
|
||||
{ .compatible = "richtek,rt5033-charger", },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, rt5033_charger_of_match);
|
||||
|
||||
static struct platform_driver rt5033_charger_driver = {
|
||||
.driver = {
|
||||
.name = "rt5033-charger",
|
||||
.of_match_table = rt5033_charger_of_match,
|
||||
},
|
||||
.probe = rt5033_charger_probe,
|
||||
.id_table = rt5033_charger_id,
|
||||
};
|
||||
module_platform_driver(rt5033_charger_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Richtek RT5033 charger driver");
|
||||
MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
@ -39,20 +39,4 @@ struct rt5033_battery {
|
||||
struct power_supply *psy;
|
||||
};
|
||||
|
||||
/* RT5033 charger platform data */
|
||||
struct rt5033_charger_data {
|
||||
unsigned int pre_uamp;
|
||||
unsigned int pre_uvolt;
|
||||
unsigned int const_uvolt;
|
||||
unsigned int eoc_uamp;
|
||||
unsigned int fast_uamp;
|
||||
};
|
||||
|
||||
struct rt5033_charger {
|
||||
struct device *dev;
|
||||
struct rt5033_dev *rt5033;
|
||||
struct power_supply *psy;
|
||||
struct rt5033_charger_data *chg;
|
||||
};
|
||||
|
||||
#endif /* __RT5033_H__ */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user