Merge branch 'ACPI-support-for-xgmac_mdio-drivers'

Calvin Johnson says:

====================
ACPI support for xgmac_mdio drivers.

This patch series provides ACPI support for xgmac_mdio driver.

Changes in v3:
- handle case MDIOBUS_NO_CAP

Changes in v2:
- Reserve "0" to mean that no mdiobus capabilities have been declared.
- bus->id: change to appropriate printk format specifier
- clean up xgmac_acpi_match
- clariy platform_get_resource() usage with comments
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/freescale/xgmac_mdio.c

@@ -245,14 +245,19 @@ static int xgmac_mdio_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct mii_bus *bus;
-	struct resource res;
+	struct resource *res;
 	struct mdio_fsl_priv *priv;
 	int ret;
 
-	ret = of_address_to_resource(np, 0, &res);
-	if (ret) {
+	/* In DPAA-1, MDIO is one of the many FMan sub-devices. The FMan
+	 * defines a register space that spans a large area, covering all the
+	 * subdevice areas. Therefore, MDIO cannot claim exclusive access to
+	 * this register area.
+	 */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
 		dev_err(&pdev->dev, "could not obtain address\n");
-		return ret;
+		return -EINVAL;
 	}
 
 	bus = mdiobus_alloc_size(sizeof(struct mdio_fsl_priv));
@@ -263,21 +268,22 @@ static int xgmac_mdio_probe(struct platform_device *pdev)
 	bus->read = xgmac_mdio_read;
 	bus->write = xgmac_mdio_write;
 	bus->parent = &pdev->dev;
-	snprintf(bus->id, MII_BUS_ID_SIZE, "%llx", (unsigned long long)res.start);
+	bus->probe_capabilities = MDIOBUS_C22_C45;
+	snprintf(bus->id, MII_BUS_ID_SIZE, "%pa", &res->start);
 
 	/* Set the PHY base address */
 	priv = bus->priv;
-	priv->mdio_base = of_iomap(np, 0);
+	priv->mdio_base = ioremap(res->start, resource_size(res));
 	if (!priv->mdio_base) {
 		ret = -ENOMEM;
 		goto err_ioremap;
 	}
 
-	priv->is_little_endian = of_property_read_bool(pdev->dev.of_node,
-						       "little-endian");
+	priv->is_little_endian = device_property_read_bool(&pdev->dev,
+							   "little-endian");
 
-	priv->has_a011043 = of_property_read_bool(pdev->dev.of_node,
-						  "fsl,erratum-a011043");
+	priv->has_a011043 = device_property_read_bool(&pdev->dev,
+						      "fsl,erratum-a011043");
 
 	ret = of_mdiobus_register(bus, np);
 	if (ret) {
@@ -320,10 +326,17 @@ static const struct of_device_id xgmac_mdio_match[] = {
 };
 MODULE_DEVICE_TABLE(of, xgmac_mdio_match);
 
+static const struct acpi_device_id xgmac_acpi_match[] = {
+	{ "NXP0006" },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, xgmac_acpi_match);
+
 static struct platform_driver xgmac_mdio_driver = {
 	.driver = {
 		.name = "fsl-fman_xmdio",
 		.of_match_table = xgmac_mdio_match,
+		.acpi_match_table = xgmac_acpi_match,
 	},
 	.probe = xgmac_mdio_probe,
 	.remove = xgmac_mdio_remove,

drivers/net/phy/mdio_bus.c

@@ -739,10 +739,24 @@ EXPORT_SYMBOL(mdiobus_free);
  */
 struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr)
 {
-	struct phy_device *phydev;
+	struct phy_device *phydev = ERR_PTR(-ENODEV);
 	int err;
 
-	phydev = get_phy_device(bus, addr, false);
+	switch (bus->probe_capabilities) {
+	case MDIOBUS_NO_CAP:
+	case MDIOBUS_C22:
+		phydev = get_phy_device(bus, addr, false);
+		break;
+	case MDIOBUS_C45:
+		phydev = get_phy_device(bus, addr, true);
+		break;
+	case MDIOBUS_C22_C45:
+		phydev = get_phy_device(bus, addr, false);
+		if (IS_ERR(phydev))
+			phydev = get_phy_device(bus, addr, true);
+		break;
+	}
+
 	if (IS_ERR(phydev))
 		return phydev;
 

include/linux/phy.h

@@ -298,6 +298,14 @@ struct mii_bus {
 	/* RESET GPIO descriptor pointer */
 	struct gpio_desc *reset_gpiod;
 
+	/* bus capabilities, used for probing */
+	enum {
+		MDIOBUS_NO_CAP = 0,
+		MDIOBUS_C22,
+		MDIOBUS_C45,
+		MDIOBUS_C22_C45,
+	} probe_capabilities;
+
 	/* protect access to the shared element */
 	struct mutex shared_lock;