Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-25 13:41:51 +00:00
Code Issues Packages Projects Releases Wiki Activity

amd-xgbe: Be sure to set MDIO modes on device (re)start

Browse Source 
The MDIO register mode is set when the device is probed. But when the
device is brought down and then back up, the MDIO register mode has been
reset.  Be sure to reset the mode during device startup and only change
the mode of the address specified.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Lendacky, Thomas 2017-02-28 15:03:01 -06:00 committed by David S. Miller
parent 402168b4c2
commit b42c6761fd
2 changed files with 23 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/net/ethernet/amd/xgbe/xgbe-dev.c
View File

@ -1323,7 +1323,7 @@ static int xgbe_read_ext_mii_regs(struct xgbe_prv_data *pdata, int addr,
static int xgbe_set_ext_mii_mode(struct xgbe_prv_data *pdata, unsigned int port,
enum xgbe_mdio_mode mode)
{
unsigned int reg_val = 0;
unsigned int reg_val = XGMAC_IOREAD(pdata, MAC_MDIOCL22R);
switch (mode) {
case XGBE_MDIO_MODE_CL22:

22
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
View File

@ -875,6 +875,16 @@ static int xgbe_phy_find_phy_device(struct xgbe_prv_data *pdata)
!phy_data->sfp_phy_avail)
return 0;
/* Set the proper MDIO mode for the PHY */
ret = pdata->hw_if.set_ext_mii_mode(pdata, phy_data->mdio_addr,
phy_data->phydev_mode);
if (ret) {
netdev_err(pdata->netdev,
"mdio port/clause not compatible (%u/%u)\n",
phy_data->mdio_addr, phy_data->phydev_mode);
return ret;
}
/* Create and connect to the PHY device */
phydev = get_phy_device(phy_data->mii, phy_data->mdio_addr,
(phy_data->phydev_mode == XGBE_MDIO_MODE_CL45));
@ -2722,6 +2732,18 @@ static int xgbe_phy_start(struct xgbe_prv_data *pdata)
if (ret)
return ret;
/* Set the proper MDIO mode for the re-driver */
if (phy_data->redrv && !phy_data->redrv_if) {
ret = pdata->hw_if.set_ext_mii_mode(pdata, phy_data->redrv_addr,
XGBE_MDIO_MODE_CL22);
if (ret) {
netdev_err(pdata->netdev,
"redriver mdio port not compatible (%u)\n",
phy_data->redrv_addr);
return ret;
}
}
/* Start in highest supported mode */
xgbe_phy_set_mode(pdata, phy_data->start_mode);