mirror of
https://github.com/torvalds/linux.git
synced 2024-12-02 17:11:33 +00:00
OMAP2xxx clock: move the DPLL+CORE composite clock code into mach-omap2/clkt2xxx_dpllcore.c
Move the DPLL+CORE composite clock functions from clock2xxx.c to mach-omap2/clkt2xxx_dpllcore.c. This is intended to make the clock code easier to understand, since all of the functions needed to manage the OMAP2 DPLL+CORE clock are now located in their own file, rather than being mixed with other, unrelated functions. Clock debugging is also now more finely-grained, since the DEBUG macro can now be defined for the DPLL+CORE clock alone. This should reduce unnecessary console noise when debugging. Also, if at some future point the mach-omap2/ directory is split into OMAP2/3/4 variants, this clkt file can be placed in the mach-omap2xxx/ directory, rather than shared with other chip types that don't use this clock type. Thanks to Alexander Shishkin <virtuoso@slind.org> for his comments to improve the patch description. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Alexander Shishkin <virtuoso@slind.org>
This commit is contained in:
Paul Walmsley
parent
69ecefca51
commit
b1823d8616
@ -11,8 +11,10 @@ prcm-common = prcm.o powerdomain.o
|
||||
clock-common = clock.o clock_common_data.o \
|
||||
clockdomain.o clkt_dpll.o \
|
||||
clkt_clksel.o
|
||||
clock-omap2xxx = clkt2xxx_dpllcore.o
|
||||
|
||||
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common)
|
||||
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common) \
|
||||
$(clock-omap2xxx)
|
||||
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) \
|
||||
$(omap-3-4-common)
|
||||
obj-$(CONFIG_ARCH_OMAP4) += $(omap-3-4-common) $(prcm-common) $(clock-common)
|
||||
|
||||
173
arch/arm/mach-omap2/clkt2xxx_dpllcore.c
Normal file
173
arch/arm/mach-omap2/clkt2xxx_dpllcore.c
Normal file
@ -0,0 +1,173 @@
|
||||
/*
|
||||
* DPLL + CORE_CLK composite clock functions
|
||||
*
|
||||
* Copyright (C) 2005-2008 Texas Instruments, Inc.
|
||||
* Copyright (C) 2004-2010 Nokia Corporation
|
||||
*
|
||||
* Contacts:
|
||||
* Richard Woodruff <r-woodruff2@ti.com>
|
||||
* Paul Walmsley
|
||||
*
|
||||
* Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
|
||||
* Gordon McNutt and RidgeRun, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* XXX The DPLL and CORE clocks should be split into two separate clock
|
||||
* types.
|
||||
*/
|
||||
#undef DEBUG
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#include <plat/clock.h>
|
||||
#include <plat/sram.h>
|
||||
#include <plat/sdrc.h>
|
||||
|
||||
#include "clock.h"
|
||||
#include "clock2xxx.h"
|
||||
#include "opp2xxx.h"
|
||||
#include "cm.h"
|
||||
#include "cm-regbits-24xx.h"
|
||||
|
||||
/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
|
||||
|
||||
/**
|
||||
* omap2xxx_clk_get_core_rate - return the CORE_CLK rate
|
||||
* @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
|
||||
*
|
||||
* Returns the CORE_CLK rate. CORE_CLK can have one of three rate
|
||||
* sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
|
||||
* (the latter is unusual). This currently should be called with
|
||||
* struct clk *dpll_ck, which is a composite clock of dpll_ck and
|
||||
* core_ck.
|
||||
*/
|
||||
unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
|
||||
{
|
||||
long long core_clk;
|
||||
u32 v;
|
||||
|
||||
core_clk = omap2_get_dpll_rate(clk);
|
||||
|
||||
v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
|
||||
v &= OMAP24XX_CORE_CLK_SRC_MASK;
|
||||
|
||||
if (v == CORE_CLK_SRC_32K)
|
||||
core_clk = 32768;
|
||||
else
|
||||
core_clk *= v;
|
||||
|
||||
return core_clk;
|
||||
}
|
||||
|
||||
/*
|
||||
* Uses the current prcm set to tell if a rate is valid.
|
||||
* You can go slower, but not faster within a given rate set.
|
||||
*/
|
||||
static long omap2_dpllcore_round_rate(unsigned long target_rate)
|
||||
{
|
||||
u32 high, low, core_clk_src;
|
||||
|
||||
core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
|
||||
core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
|
||||
|
||||
if (core_clk_src == CORE_CLK_SRC_DPLL) { /* DPLL clockout */
|
||||
high = curr_prcm_set->dpll_speed * 2;
|
||||
low = curr_prcm_set->dpll_speed;
|
||||
} else { /* DPLL clockout x 2 */
|
||||
high = curr_prcm_set->dpll_speed;
|
||||
low = curr_prcm_set->dpll_speed / 2;
|
||||
}
|
||||
|
||||
#ifdef DOWN_VARIABLE_DPLL
|
||||
if (target_rate > high)
|
||||
return high;
|
||||
else
|
||||
return target_rate;
|
||||
#else
|
||||
if (target_rate > low)
|
||||
return high;
|
||||
else
|
||||
return low;
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
unsigned long omap2_dpllcore_recalc(struct clk *clk)
|
||||
{
|
||||
return omap2xxx_clk_get_core_rate(clk);
|
||||
}
|
||||
|
||||
int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
|
||||
{
|
||||
u32 cur_rate, low, mult, div, valid_rate, done_rate;
|
||||
u32 bypass = 0;
|
||||
struct prcm_config tmpset;
|
||||
const struct dpll_data *dd;
|
||||
|
||||
cur_rate = omap2xxx_clk_get_core_rate(dclk);
|
||||
mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
|
||||
mult &= OMAP24XX_CORE_CLK_SRC_MASK;
|
||||
|
||||
if ((rate == (cur_rate / 2)) && (mult == 2)) {
|
||||
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
|
||||
} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
|
||||
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
|
||||
} else if (rate != cur_rate) {
|
||||
valid_rate = omap2_dpllcore_round_rate(rate);
|
||||
if (valid_rate != rate)
|
||||
return -EINVAL;
|
||||
|
||||
if (mult == 1)
|
||||
low = curr_prcm_set->dpll_speed;
|
||||
else
|
||||
low = curr_prcm_set->dpll_speed / 2;
|
||||
|
||||
dd = clk->dpll_data;
|
||||
if (!dd)
|
||||
return -EINVAL;
|
||||
|
||||
tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
|
||||
tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
|
||||
dd->div1_mask);
|
||||
div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
|
||||
tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
|
||||
tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
|
||||
if (rate > low) {
|
||||
tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
|
||||
mult = ((rate / 2) / 1000000);
|
||||
done_rate = CORE_CLK_SRC_DPLL_X2;
|
||||
} else {
|
||||
tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
|
||||
mult = (rate / 1000000);
|
||||
done_rate = CORE_CLK_SRC_DPLL;
|
||||
}
|
||||
tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
|
||||
tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
|
||||
|
||||
/* Worst case */
|
||||
tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
|
||||
|
||||
if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */
|
||||
bypass = 1;
|
||||
|
||||
/* For omap2xxx_sdrc_init_params() */
|
||||
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
|
||||
|
||||
/* Force dll lock mode */
|
||||
omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
|
||||
bypass);
|
||||
|
||||
/* Errata: ret dll entry state */
|
||||
omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
|
||||
omap2xxx_sdrc_reprogram(done_rate, 0);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -54,8 +54,6 @@
|
||||
#define APLLS_CLKIN_13MHZ 2
|
||||
#define APLLS_CLKIN_12MHZ 3
|
||||
|
||||
/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
|
||||
|
||||
const struct prcm_config *curr_prcm_set;
|
||||
const struct prcm_config *rate_table;
|
||||
|
||||
@ -94,34 +92,6 @@ const struct clkops clkops_omap2430_i2chs_wait = {
|
||||
.find_companion = omap2_clk_dflt_find_companion,
|
||||
};
|
||||
|
||||
/**
|
||||
* omap2xxx_clk_get_core_rate - return the CORE_CLK rate
|
||||
* @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
|
||||
*
|
||||
* Returns the CORE_CLK rate. CORE_CLK can have one of three rate
|
||||
* sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
|
||||
* (the latter is unusual). This currently should be called with
|
||||
* struct clk *dpll_ck, which is a composite clock of dpll_ck and
|
||||
* core_ck.
|
||||
*/
|
||||
unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
|
||||
{
|
||||
long long core_clk;
|
||||
u32 v;
|
||||
|
||||
core_clk = omap2_get_dpll_rate(clk);
|
||||
|
||||
v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
|
||||
v &= OMAP24XX_CORE_CLK_SRC_MASK;
|
||||
|
||||
if (v == CORE_CLK_SRC_32K)
|
||||
core_clk = 32768;
|
||||
else
|
||||
core_clk *= v;
|
||||
|
||||
return core_clk;
|
||||
}
|
||||
|
||||
static int omap2_enable_osc_ck(struct clk *clk)
|
||||
{
|
||||
u32 pcc;
|
||||
@ -215,112 +185,6 @@ const struct clkops clkops_apll54 = {
|
||||
.disable = omap2_clk_apll_disable,
|
||||
};
|
||||
|
||||
/*
|
||||
* Uses the current prcm set to tell if a rate is valid.
|
||||
* You can go slower, but not faster within a given rate set.
|
||||
*/
|
||||
long omap2_dpllcore_round_rate(unsigned long target_rate)
|
||||
{
|
||||
u32 high, low, core_clk_src;
|
||||
|
||||
core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
|
||||
core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
|
||||
|
||||
if (core_clk_src == CORE_CLK_SRC_DPLL) { /* DPLL clockout */
|
||||
high = curr_prcm_set->dpll_speed * 2;
|
||||
low = curr_prcm_set->dpll_speed;
|
||||
} else { /* DPLL clockout x 2 */
|
||||
high = curr_prcm_set->dpll_speed;
|
||||
low = curr_prcm_set->dpll_speed / 2;
|
||||
}
|
||||
|
||||
#ifdef DOWN_VARIABLE_DPLL
|
||||
if (target_rate > high)
|
||||
return high;
|
||||
else
|
||||
return target_rate;
|
||||
#else
|
||||
if (target_rate > low)
|
||||
return high;
|
||||
else
|
||||
return low;
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
unsigned long omap2_dpllcore_recalc(struct clk *clk)
|
||||
{
|
||||
return omap2xxx_clk_get_core_rate(clk);
|
||||
}
|
||||
|
||||
int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
|
||||
{
|
||||
u32 cur_rate, low, mult, div, valid_rate, done_rate;
|
||||
u32 bypass = 0;
|
||||
struct prcm_config tmpset;
|
||||
const struct dpll_data *dd;
|
||||
|
||||
cur_rate = omap2xxx_clk_get_core_rate(dclk);
|
||||
mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
|
||||
mult &= OMAP24XX_CORE_CLK_SRC_MASK;
|
||||
|
||||
if ((rate == (cur_rate / 2)) && (mult == 2)) {
|
||||
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
|
||||
} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
|
||||
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
|
||||
} else if (rate != cur_rate) {
|
||||
valid_rate = omap2_dpllcore_round_rate(rate);
|
||||
if (valid_rate != rate)
|
||||
return -EINVAL;
|
||||
|
||||
if (mult == 1)
|
||||
low = curr_prcm_set->dpll_speed;
|
||||
else
|
||||
low = curr_prcm_set->dpll_speed / 2;
|
||||
|
||||
dd = clk->dpll_data;
|
||||
if (!dd)
|
||||
return -EINVAL;
|
||||
|
||||
tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
|
||||
tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
|
||||
dd->div1_mask);
|
||||
div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
|
||||
tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
|
||||
tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
|
||||
if (rate > low) {
|
||||
tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
|
||||
mult = ((rate / 2) / 1000000);
|
||||
done_rate = CORE_CLK_SRC_DPLL_X2;
|
||||
} else {
|
||||
tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
|
||||
mult = (rate / 1000000);
|
||||
done_rate = CORE_CLK_SRC_DPLL;
|
||||
}
|
||||
tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
|
||||
tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
|
||||
|
||||
/* Worst case */
|
||||
tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
|
||||
|
||||
if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */
|
||||
bypass = 1;
|
||||
|
||||
/* For omap2xxx_sdrc_init_params() */
|
||||
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
|
||||
|
||||
/* Force dll lock mode */
|
||||
omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
|
||||
bypass);
|
||||
|
||||
/* Errata: ret dll entry state */
|
||||
omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
|
||||
omap2xxx_sdrc_reprogram(done_rate, 0);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* omap2_table_mpu_recalc - just return the MPU speed
|
||||
* @clk: virt_prcm_set struct clk
|
||||
|
||||
Loading…
Reference in New Issue
Block a user