mirror of
https://github.com/torvalds/linux.git
synced 2024-11-27 06:31:52 +00:00
hwmon: (vt1211) Fix checkpatch issues
Fixed: ERROR: do not use assignment in if condition ERROR: switch and case should be at the same indent ERROR: trailing statements should be on next line WARNING: braces {} are not necessary for single statement blocks WARNING: simple_strtol is obsolete, use kstrtol instead Modify multi-line comments to follow Documentation/CodingStyle. Not fixed (false positive): ERROR: Macros with complex values should be enclosed in parenthesis Not all fixed (code complexity): ERROR: do not use assignment in if condition Cc: Juerg Haefliger <juergh@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
parent
9004ac8134
commit
b162c03348
@ -151,8 +151,10 @@ struct vt1211_data {
|
||||
#define ISTEMP(ix, uch_config) ((ix) < 2 ? 1 : \
|
||||
((uch_config) >> (ix)) & 1)
|
||||
|
||||
/* in5 (ix = 5) is special. It's the internal 3.3V so it's scaled in the
|
||||
driver according to the VT1211 BIOS porting guide */
|
||||
/*
|
||||
* in5 (ix = 5) is special. It's the internal 3.3V so it's scaled in the
|
||||
* driver according to the VT1211 BIOS porting guide
|
||||
*/
|
||||
#define IN_FROM_REG(ix, reg) ((reg) < 3 ? 0 : (ix) == 5 ? \
|
||||
(((reg) - 3) * 15882 + 479) / 958 : \
|
||||
(((reg) - 3) * 10000 + 479) / 958)
|
||||
@ -160,11 +162,13 @@ struct vt1211_data {
|
||||
((val) * 958 + 7941) / 15882 + 3 : \
|
||||
((val) * 958 + 5000) / 10000 + 3, 0, 255))
|
||||
|
||||
/* temp1 (ix = 0) is an intel thermal diode which is scaled in user space.
|
||||
temp2 (ix = 1) is the internal temp diode so it's scaled in the driver
|
||||
according to some measurements that I took on an EPIA M10000.
|
||||
temp3-7 are thermistor based so the driver returns the voltage measured at
|
||||
the pin (range 0V - 2.2V). */
|
||||
/*
|
||||
* temp1 (ix = 0) is an intel thermal diode which is scaled in user space.
|
||||
* temp2 (ix = 1) is the internal temp diode so it's scaled in the driver
|
||||
* according to some measurements that I took on an EPIA M10000.
|
||||
* temp3-7 are thermistor based so the driver returns the voltage measured at
|
||||
* the pin (range 0V - 2.2V).
|
||||
*/
|
||||
#define TEMP_FROM_REG(ix, reg) ((ix) == 0 ? (reg) * 1000 : \
|
||||
(ix) == 1 ? (reg) < 51 ? 0 : \
|
||||
((reg) - 51) * 1000 : \
|
||||
@ -186,8 +190,10 @@ struct vt1211_data {
|
||||
* Super-I/O constants and functions
|
||||
* --------------------------------------------------------------------- */
|
||||
|
||||
/* Configuration index port registers
|
||||
* The vt1211 can live at 2 different addresses so we need to probe both */
|
||||
/*
|
||||
* Configuration index port registers
|
||||
* The vt1211 can live at 2 different addresses so we need to probe both
|
||||
*/
|
||||
#define SIO_REG_CIP1 0x2e
|
||||
#define SIO_REG_CIP2 0x4e
|
||||
|
||||
@ -377,7 +383,12 @@ static ssize_t set_in(struct device *dev, struct device_attribute *attr,
|
||||
to_sensor_dev_attr_2(attr);
|
||||
int ix = sensor_attr_2->index;
|
||||
int fn = sensor_attr_2->nr;
|
||||
long val = simple_strtol(buf, NULL, 10);
|
||||
long val;
|
||||
int err;
|
||||
|
||||
err = kstrtol(buf, 10, &val);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
mutex_lock(&data->update_lock);
|
||||
switch (fn) {
|
||||
@ -446,7 +457,12 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
|
||||
to_sensor_dev_attr_2(attr);
|
||||
int ix = sensor_attr_2->index;
|
||||
int fn = sensor_attr_2->nr;
|
||||
long val = simple_strtol(buf, NULL, 10);
|
||||
long val;
|
||||
int err;
|
||||
|
||||
err = kstrtol(buf, 10, &val);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
mutex_lock(&data->update_lock);
|
||||
switch (fn) {
|
||||
@ -517,8 +533,13 @@ static ssize_t set_fan(struct device *dev, struct device_attribute *attr,
|
||||
to_sensor_dev_attr_2(attr);
|
||||
int ix = sensor_attr_2->index;
|
||||
int fn = sensor_attr_2->nr;
|
||||
long val = simple_strtol(buf, NULL, 10);
|
||||
int reg;
|
||||
unsigned long val;
|
||||
int err;
|
||||
|
||||
err = kstrtoul(buf, 10, &val);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
mutex_lock(&data->update_lock);
|
||||
|
||||
@ -536,16 +557,23 @@ static ssize_t set_fan(struct device *dev, struct device_attribute *attr,
|
||||
break;
|
||||
case SHOW_SET_FAN_DIV:
|
||||
switch (val) {
|
||||
case 1: data->fan_div[ix] = 0; break;
|
||||
case 2: data->fan_div[ix] = 1; break;
|
||||
case 4: data->fan_div[ix] = 2; break;
|
||||
case 8: data->fan_div[ix] = 3; break;
|
||||
default:
|
||||
count = -EINVAL;
|
||||
dev_warn(dev, "fan div value %ld not "
|
||||
"supported. Choose one of 1, 2, "
|
||||
"4, or 8.\n", val);
|
||||
goto EXIT;
|
||||
case 1:
|
||||
data->fan_div[ix] = 0;
|
||||
break;
|
||||
case 2:
|
||||
data->fan_div[ix] = 1;
|
||||
break;
|
||||
case 4:
|
||||
data->fan_div[ix] = 2;
|
||||
break;
|
||||
case 8:
|
||||
data->fan_div[ix] = 3;
|
||||
break;
|
||||
default:
|
||||
count = -EINVAL;
|
||||
dev_warn(dev, "fan div value %ld not supported. "
|
||||
"Choose one of 1, 2, 4, or 8.\n", val);
|
||||
goto EXIT;
|
||||
}
|
||||
vt1211_write8(data, VT1211_REG_FAN_DIV,
|
||||
((data->fan_div[1] << 6) |
|
||||
@ -610,8 +638,13 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
|
||||
to_sensor_dev_attr_2(attr);
|
||||
int ix = sensor_attr_2->index;
|
||||
int fn = sensor_attr_2->nr;
|
||||
long val = simple_strtol(buf, NULL, 10);
|
||||
int tmp, reg;
|
||||
unsigned long val;
|
||||
int err;
|
||||
|
||||
err = kstrtoul(buf, 10, &val);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
mutex_lock(&data->update_lock);
|
||||
|
||||
@ -628,11 +661,12 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
|
||||
switch (val) {
|
||||
case 0:
|
||||
data->pwm_ctl[ix] &= 7;
|
||||
/* disable SmartGuardian if both PWM outputs are
|
||||
* disabled */
|
||||
if ((data->pwm_ctl[ix ^ 1] & 1) == 0) {
|
||||
/*
|
||||
* disable SmartGuardian if both PWM outputs are
|
||||
* disabled
|
||||
*/
|
||||
if ((data->pwm_ctl[ix ^ 1] & 1) == 0)
|
||||
data->fan_ctl &= 0xe;
|
||||
}
|
||||
break;
|
||||
case 2:
|
||||
data->pwm_ctl[ix] |= 8;
|
||||
@ -656,16 +690,15 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
|
||||
val = 135000 / SENSORS_LIMIT(val, 135000 >> 7, 135000);
|
||||
/* calculate tmp = log2(val) */
|
||||
tmp = 0;
|
||||
for (val >>= 1; val > 0; val >>= 1) {
|
||||
for (val >>= 1; val > 0; val >>= 1)
|
||||
tmp++;
|
||||
}
|
||||
/* sync the data cache */
|
||||
reg = vt1211_read8(data, VT1211_REG_PWM_CLK);
|
||||
data->pwm_clk = (reg & 0xf8) | tmp;
|
||||
vt1211_write8(data, VT1211_REG_PWM_CLK, data->pwm_clk);
|
||||
break;
|
||||
case SHOW_SET_PWM_AUTO_CHANNELS_TEMP:
|
||||
if ((val < 1) || (val > 7)) {
|
||||
if (val < 1 || val > 7) {
|
||||
count = -EINVAL;
|
||||
dev_warn(dev, "temp channel %ld not supported. "
|
||||
"Choose a value between 1 and 7.\n", val);
|
||||
@ -741,8 +774,14 @@ static ssize_t set_pwm_auto_point_temp(struct device *dev,
|
||||
to_sensor_dev_attr_2(attr);
|
||||
int ix = sensor_attr_2->index;
|
||||
int ap = sensor_attr_2->nr;
|
||||
long val = simple_strtol(buf, NULL, 10);
|
||||
int reg;
|
||||
long val;
|
||||
int err;
|
||||
|
||||
err = kstrtol(buf, 10, &val);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
|
||||
mutex_lock(&data->update_lock);
|
||||
|
||||
@ -774,7 +813,7 @@ static ssize_t set_pwm_auto_point_temp(struct device *dev,
|
||||
* 1 1 : pwm2 low speed duty cycle (pwm_auto_pwm[1][1])
|
||||
* 1 2 : pwm2 high speed duty cycle (pwm_auto_pwm[1][2])
|
||||
* 1 3 : pwm2 full speed (pwm_auto_pwm[1][3], hard-wired to 255)
|
||||
*/
|
||||
*/
|
||||
|
||||
static ssize_t show_pwm_auto_point_pwm(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
@ -798,16 +837,15 @@ static ssize_t set_pwm_auto_point_pwm(struct device *dev,
|
||||
to_sensor_dev_attr_2(attr);
|
||||
int ix = sensor_attr_2->index;
|
||||
int ap = sensor_attr_2->nr;
|
||||
long val = simple_strtol(buf, NULL, 10);
|
||||
unsigned long val;
|
||||
int err;
|
||||
|
||||
if ((val < 0) || (val > 255)) {
|
||||
dev_err(dev, "pwm value %ld is out of range. "
|
||||
"Choose a value between 0 and 255.\n" , val);
|
||||
return -EINVAL;
|
||||
}
|
||||
err = kstrtoul(buf, 10, &val);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
mutex_lock(&data->update_lock);
|
||||
data->pwm_auto_pwm[ix][ap] = val;
|
||||
data->pwm_auto_pwm[ix][ap] = SENSORS_LIMIT(val, 0, 255);
|
||||
vt1211_write8(data, VT1211_REG_PWM_AUTO_PWM(ix, ap),
|
||||
data->pwm_auto_pwm[ix][ap]);
|
||||
mutex_unlock(&data->update_lock);
|
||||
@ -831,7 +869,12 @@ static ssize_t set_vrm(struct device *dev, struct device_attribute *attr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
struct vt1211_data *data = dev_get_drvdata(dev);
|
||||
long val = simple_strtol(buf, NULL, 10);
|
||||
unsigned long val;
|
||||
int err;
|
||||
|
||||
err = kstrtoul(buf, 10, &val);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
data->vrm = val;
|
||||
|
||||
@ -1069,7 +1112,8 @@ static void __devinit vt1211_init_device(struct vt1211_data *data)
|
||||
vt1211_write8(data, VT1211_REG_UCH_CONFIG, data->uch_config);
|
||||
}
|
||||
|
||||
/* Initialize the interrupt mode (if request at module load time).
|
||||
/*
|
||||
* Initialize the interrupt mode (if request at module load time).
|
||||
* The VT1211 implements 3 different modes for clearing interrupts:
|
||||
* 0: Clear INT when status register is read. Regenerate INT as long
|
||||
* as temp stays above hysteresis limit.
|
||||
@ -1079,7 +1123,8 @@ static void __devinit vt1211_init_device(struct vt1211_data *data)
|
||||
* 2: Clear INT when temp falls below max limit.
|
||||
*
|
||||
* The driver only allows to force mode 0 since that's the only one
|
||||
* that makes sense for 'sensors' */
|
||||
* that makes sense for 'sensors'
|
||||
*/
|
||||
if (int_mode == 0) {
|
||||
vt1211_write8(data, VT1211_REG_TEMP1_CONFIG, 0);
|
||||
vt1211_write8(data, VT1211_REG_TEMP2_CONFIG, 0);
|
||||
@ -1119,9 +1164,8 @@ static void vt1211_remove_sysfs(struct platform_device *pdev)
|
||||
device_remove_file(dev,
|
||||
&vt1211_sysfs_fan_pwm[i].dev_attr);
|
||||
}
|
||||
for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_misc); i++) {
|
||||
for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_misc); i++)
|
||||
device_remove_file(dev, &vt1211_sysfs_misc[i]);
|
||||
}
|
||||
}
|
||||
|
||||
static int __devinit vt1211_probe(struct platform_device *pdev)
|
||||
@ -1131,7 +1175,8 @@ static int __devinit vt1211_probe(struct platform_device *pdev)
|
||||
struct resource *res;
|
||||
int i, err;
|
||||
|
||||
if (!(data = kzalloc(sizeof(struct vt1211_data), GFP_KERNEL))) {
|
||||
data = kzalloc(sizeof(struct vt1211_data), GFP_KERNEL);
|
||||
if (!data) {
|
||||
err = -ENOMEM;
|
||||
dev_err(dev, "Out of memory\n");
|
||||
goto EXIT;
|
||||
@ -1185,16 +1230,14 @@ static int __devinit vt1211_probe(struct platform_device *pdev)
|
||||
for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_fan_pwm); i++) {
|
||||
err = device_create_file(dev,
|
||||
&vt1211_sysfs_fan_pwm[i].dev_attr);
|
||||
if (err) {
|
||||
if (err)
|
||||
goto EXIT_DEV_REMOVE;
|
||||
}
|
||||
}
|
||||
for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_misc); i++) {
|
||||
err = device_create_file(dev,
|
||||
&vt1211_sysfs_misc[i]);
|
||||
if (err) {
|
||||
if (err)
|
||||
goto EXIT_DEV_REMOVE;
|
||||
}
|
||||
}
|
||||
|
||||
/* Register device */
|
||||
@ -1293,9 +1336,8 @@ static int __init vt1211_find(int sio_cip, unsigned short *address)
|
||||
superio_enter(sio_cip);
|
||||
|
||||
devid = force_id ? force_id : superio_inb(sio_cip, SIO_VT1211_DEVID);
|
||||
if (devid != SIO_VT1211_ID) {
|
||||
if (devid != SIO_VT1211_ID)
|
||||
goto EXIT;
|
||||
}
|
||||
|
||||
superio_select(sio_cip, SIO_VT1211_LDN_HWMON);
|
||||
|
||||
@ -1325,35 +1367,35 @@ static int __init vt1211_init(void)
|
||||
int err;
|
||||
unsigned short address = 0;
|
||||
|
||||
if ((err = vt1211_find(SIO_REG_CIP1, &address)) &&
|
||||
(err = vt1211_find(SIO_REG_CIP2, &address))) {
|
||||
goto EXIT;
|
||||
err = vt1211_find(SIO_REG_CIP1, &address);
|
||||
if (err) {
|
||||
err = vt1211_find(SIO_REG_CIP2, &address);
|
||||
if (err)
|
||||
goto EXIT;
|
||||
}
|
||||
|
||||
if ((uch_config < -1) || (uch_config > 31)) {
|
||||
err = -EINVAL;
|
||||
pr_warn("Invalid UCH configuration %d. "
|
||||
"Choose a value between 0 and 31.\n", uch_config);
|
||||
goto EXIT;
|
||||
goto EXIT;
|
||||
}
|
||||
|
||||
if ((int_mode < -1) || (int_mode > 0)) {
|
||||
err = -EINVAL;
|
||||
pr_warn("Invalid interrupt mode %d. "
|
||||
"Only mode 0 is supported.\n", int_mode);
|
||||
goto EXIT;
|
||||
}
|
||||
|
||||
err = platform_driver_register(&vt1211_driver);
|
||||
if (err) {
|
||||
goto EXIT;
|
||||
}
|
||||
|
||||
err = platform_driver_register(&vt1211_driver);
|
||||
if (err)
|
||||
goto EXIT;
|
||||
|
||||
/* Sets global pdev as a side effect */
|
||||
err = vt1211_device_add(address);
|
||||
if (err) {
|
||||
if (err)
|
||||
goto EXIT_DRV_UNREGISTER;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user