linux-can-fixes-for-3.17-20140918

-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlQaozkACgkQjTAFq1RaXHMfqQCfYwrXHrzRmTq+/2oohauS1orp
 4B8AnRagBwGjDLUKzSBuTM021BMe2D4+
 =b1sn
 -----END PGP SIGNATURE-----

Merge tag 'linux-can-fixes-for-3.17-20140918' of git://gitorious.org/linux-can/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2014-09-18

this is a pull request of 8 patches for current net.

A patch by Roger Quadros for the c_can driver fixes the swapped parameters of
the c_can_hw_raminit_ti() function. Oliver Hartkopp adds the missing PCI ids to
the peak_pci driver to support the single channel PCAN ExpressCard 34 adapter.
David Dueck converts the at91_can driver to use proper clock handling
functions. Then there are 5 patches by David Jander and me which fix several
mailbox related problems in the flexcan driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/can/at91_can.c

@@ -1123,7 +1123,9 @@ static int at91_open(struct net_device *dev)
 	struct at91_priv *priv = netdev_priv(dev);
 	int err;
 
-	clk_enable(priv->clk);
+	err = clk_prepare_enable(priv->clk);
+	if (err)
+		return err;
 
 	/* check or determine and set bittime */
 	err = open_candev(dev);
@@ -1149,7 +1151,7 @@ static int at91_open(struct net_device *dev)
  out_close:
 	close_candev(dev);
  out:
-	clk_disable(priv->clk);
+	clk_disable_unprepare(priv->clk);
 
 	return err;
 }
@@ -1166,7 +1168,7 @@ static int at91_close(struct net_device *dev)
 	at91_chip_stop(dev, CAN_STATE_STOPPED);
 
 	free_irq(dev->irq, dev);
-	clk_disable(priv->clk);
+	clk_disable_unprepare(priv->clk);
 
 	close_candev(dev);
 

drivers/net/can/c_can/c_can_platform.c

@@ -97,14 +97,14 @@ static void c_can_hw_raminit_ti(const struct c_can_priv *priv, bool enable)
 	ctrl |= CAN_RAMINIT_DONE_MASK(priv->instance);
 	writel(ctrl, priv->raminit_ctrlreg);
 	ctrl &= ~CAN_RAMINIT_DONE_MASK(priv->instance);
-	c_can_hw_raminit_wait_ti(priv, ctrl, mask);
+	c_can_hw_raminit_wait_ti(priv, mask, ctrl);
 
 	if (enable) {
 		/* Set start bit and wait for the done bit. */
 		ctrl |= CAN_RAMINIT_START_MASK(priv->instance);
 		writel(ctrl, priv->raminit_ctrlreg);
 		ctrl |= CAN_RAMINIT_DONE_MASK(priv->instance);
-		c_can_hw_raminit_wait_ti(priv, ctrl, mask);
+		c_can_hw_raminit_wait_ti(priv, mask, ctrl);
 	}
 	spin_unlock(&raminit_lock);
 }

drivers/net/can/flexcan.c

@@ -62,7 +62,7 @@
 #define FLEXCAN_MCR_BCC			BIT(16)
 #define FLEXCAN_MCR_LPRIO_EN		BIT(13)
 #define FLEXCAN_MCR_AEN			BIT(12)
-#define FLEXCAN_MCR_MAXMB(x)		((x) & 0x1f)
+#define FLEXCAN_MCR_MAXMB(x)		((x) & 0x7f)
 #define FLEXCAN_MCR_IDAM_A		(0 << 8)
 #define FLEXCAN_MCR_IDAM_B		(1 << 8)
 #define FLEXCAN_MCR_IDAM_C		(2 << 8)
@@ -125,7 +125,9 @@
 	 FLEXCAN_ESR_BOFF_INT | FLEXCAN_ESR_ERR_INT)
 
 /* FLEXCAN interrupt flag register (IFLAG) bits */
-#define FLEXCAN_TX_BUF_ID		8
+/* Errata ERR005829 step7: Reserve first valid MB */
+#define FLEXCAN_TX_BUF_RESERVED		8
+#define FLEXCAN_TX_BUF_ID		9
 #define FLEXCAN_IFLAG_BUF(x)		BIT(x)
 #define FLEXCAN_IFLAG_RX_FIFO_OVERFLOW	BIT(7)
 #define FLEXCAN_IFLAG_RX_FIFO_WARN	BIT(6)
@@ -136,6 +138,17 @@
 
 /* FLEXCAN message buffers */
 #define FLEXCAN_MB_CNT_CODE(x)		(((x) & 0xf) << 24)
+#define FLEXCAN_MB_CODE_RX_INACTIVE	(0x0 << 24)
+#define FLEXCAN_MB_CODE_RX_EMPTY	(0x4 << 24)
+#define FLEXCAN_MB_CODE_RX_FULL		(0x2 << 24)
+#define FLEXCAN_MB_CODE_RX_OVERRRUN	(0x6 << 24)
+#define FLEXCAN_MB_CODE_RX_RANSWER	(0xa << 24)
+
+#define FLEXCAN_MB_CODE_TX_INACTIVE	(0x8 << 24)
+#define FLEXCAN_MB_CODE_TX_ABORT	(0x9 << 24)
+#define FLEXCAN_MB_CODE_TX_DATA		(0xc << 24)
+#define FLEXCAN_MB_CODE_TX_TANSWER	(0xe << 24)
+
 #define FLEXCAN_MB_CNT_SRR		BIT(22)
 #define FLEXCAN_MB_CNT_IDE		BIT(21)
 #define FLEXCAN_MB_CNT_RTR		BIT(20)
@@ -428,6 +441,14 @@ static int flexcan_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	flexcan_write(can_id, &regs->cantxfg[FLEXCAN_TX_BUF_ID].can_id);
 	flexcan_write(ctrl, &regs->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
 
+	/* Errata ERR005829 step8:
+	 * Write twice INACTIVE(0x8) code to first MB.
+	 */
+	flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
+		      &regs->cantxfg[FLEXCAN_TX_BUF_RESERVED].can_ctrl);
+	flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
+		      &regs->cantxfg[FLEXCAN_TX_BUF_RESERVED].can_ctrl);
+
 	return NETDEV_TX_OK;
 }
 
@@ -744,6 +765,9 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
 		stats->tx_bytes += can_get_echo_skb(dev, 0);
 		stats->tx_packets++;
 		can_led_event(dev, CAN_LED_EVENT_TX);
+		/* after sending a RTR frame mailbox is in RX mode */
+		flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
+			      &regs->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
 		flexcan_write((1 << FLEXCAN_TX_BUF_ID), &regs->iflag1);
 		netif_wake_queue(dev);
 	}
@@ -801,6 +825,7 @@ static int flexcan_chip_start(struct net_device *dev)
 	struct flexcan_regs __iomem *regs = priv->base;
 	int err;
 	u32 reg_mcr, reg_ctrl;
+	int i;
 
 	/* enable module */
 	err = flexcan_chip_enable(priv);
@@ -867,8 +892,18 @@ static int flexcan_chip_start(struct net_device *dev)
 	netdev_dbg(dev, "%s: writing ctrl=0x%08x", __func__, reg_ctrl);
 	flexcan_write(reg_ctrl, &regs->ctrl);
 
-	/* Abort any pending TX, mark Mailbox as INACTIVE */
+	/* clear and invalidate all mailboxes first */
-	flexcan_write(FLEXCAN_MB_CNT_CODE(0x4),
+	for (i = FLEXCAN_TX_BUF_ID; i < ARRAY_SIZE(regs->cantxfg); i++) {
+		flexcan_write(FLEXCAN_MB_CODE_RX_INACTIVE,
+			      &regs->cantxfg[i].can_ctrl);
+	}
+
+	/* Errata ERR005829: mark first TX mailbox as INACTIVE */
+	flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
+		      &regs->cantxfg[FLEXCAN_TX_BUF_RESERVED].can_ctrl);
+
+	/* mark TX mailbox as INACTIVE */
+	flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
 		      &regs->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
 
 	/* acceptance mask/acceptance code (accept everything) */

drivers/net/can/sja1000/peak_pci.c

@@ -70,6 +70,8 @@ struct peak_pci_chan {
 #define PEAK_PC_104P_DEVICE_ID	0x0006	/* PCAN-PC/104+ cards */
 #define PEAK_PCI_104E_DEVICE_ID	0x0007	/* PCAN-PCI/104 Express cards */
 #define PEAK_MPCIE_DEVICE_ID	0x0008	/* The miniPCIe slot cards */
+#define PEAK_PCIE_OEM_ID	0x0009	/* PCAN-PCI Express OEM */
+#define PEAK_PCIEC34_DEVICE_ID	0x000A	/* PCAN-PCI Express 34 (one channel) */
 
 #define PEAK_PCI_CHAN_MAX	4
 
@@ -87,6 +89,7 @@ static const struct pci_device_id peak_pci_tbl[] = {
 	{PEAK_PCI_VENDOR_ID, PEAK_CPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
 #ifdef CONFIG_CAN_PEAK_PCIEC
 	{PEAK_PCI_VENDOR_ID, PEAK_PCIEC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+	{PEAK_PCI_VENDOR_ID, PEAK_PCIEC34_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
 #endif
 	{0,}
 };
@@ -653,7 +656,8 @@ static int peak_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		 * This must be done *before* register_sja1000dev() but
 		 * *after* devices linkage
 		 */
-		if (pdev->device == PEAK_PCIEC_DEVICE_ID) {
+		if (pdev->device == PEAK_PCIEC_DEVICE_ID ||
+		    pdev->device == PEAK_PCIEC34_DEVICE_ID) {
 			err = peak_pciec_probe(pdev, dev);
 			if (err) {
 				dev_err(&pdev->dev,