From a74b74a5555c741ed3df896096e33b853995631e Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 15 Dec 2010 07:20:16 +0800 Subject: [PATCH 01/66] ARM: pxa: PXA_ESERIES depends on FB_W100. As arch/arm/mach-pxa/eseries.c references w100fb_gpio_{read,write}() directly. Signed-off-by: Lennert Buytenhek Signed-off-by: Eric Miao --- arch/arm/mach-pxa/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index dd235ecc9d6c..c93e73d54dd1 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -540,6 +540,7 @@ config MACH_ICONTROL config ARCH_PXA_ESERIES bool "PXA based Toshiba e-series PDAs" select PXA25x + select FB_W100 config MACH_E330 bool "Toshiba e330" From 1ae1b5f053cf36bd0f913e83f3b136fec8152d4d Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 18 Dec 2010 13:57:00 +0000 Subject: [PATCH 02/66] ARM: smp: avoid incrementing mm_users on CPU startup We should not be incrementing mm_users when we startup a secondary CPU - doing so results in mm_users incrementing by one each time we hotplug a CPU, which will eventually wrap, and will cause problems. Other architectures such as x86 do not increment mm_users, but only mm_count, so we follow that pattern. Signed-off-by: Russell King --- arch/arm/kernel/smp.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 8c1959590252..9066473c0ebc 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -310,7 +310,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void) * All kernel threads share the same mm context; grab a * reference and switch to it. */ - atomic_inc(&mm->mm_users); atomic_inc(&mm->mm_count); current->active_mm = mm; cpumask_set_cpu(cpu, mm_cpumask(mm)); From 39af22a79232373764904576f31572f1db76af10 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 15 Dec 2010 15:14:45 -0500 Subject: [PATCH 03/66] ARM: get rid of kmap_high_l1_vipt() Since commit 3e4d3af501 "mm: stack based kmap_atomic()", it is no longer necessary to carry an ad hoc version of kmap_atomic() added in commit 7e5a69e83b "ARM: 6007/1: fix highmem with VIPT cache and DMA" to cope with reentrancy. In fact, it is now actively wrong to rely on fixed kmap type indices (namely KM_L1_CACHE) as kmap_atomic() totally ignores them now and a concurrent instance of it may reuse any slot for any purpose. Signed-off-by: Nicolas Pitre --- arch/arm/include/asm/highmem.h | 3 -- arch/arm/mm/dma-mapping.c | 7 +-- arch/arm/mm/flush.c | 7 +-- arch/arm/mm/highmem.c | 87 ---------------------------------- 4 files changed, 8 insertions(+), 96 deletions(-) diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h index 1fc684e70ab6..7080e2c8fa62 100644 --- a/arch/arm/include/asm/highmem.h +++ b/arch/arm/include/asm/highmem.h @@ -25,9 +25,6 @@ extern void *kmap_high(struct page *page); extern void *kmap_high_get(struct page *page); extern void kunmap_high(struct page *page); -extern void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte); -extern void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte); - /* * The following functions are already defined by * when CONFIG_HIGHMEM is not set. diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index ac6a36142fcd..809f1bf9fa29 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -480,10 +481,10 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset, op(vaddr, len, dir); kunmap_high(page); } else if (cache_is_vipt()) { - pte_t saved_pte; - vaddr = kmap_high_l1_vipt(page, &saved_pte); + /* unmapped pages might still be cached */ + vaddr = kmap_atomic(page); op(vaddr + offset, len, dir); - kunmap_high_l1_vipt(page, saved_pte); + kunmap_atomic(vaddr); } } else { vaddr = page_address(page) + offset; diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 391ffae75098..c29f2839f1d2 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include @@ -180,10 +181,10 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page) __cpuc_flush_dcache_area(addr, PAGE_SIZE); kunmap_high(page); } else if (cache_is_vipt()) { - pte_t saved_pte; - addr = kmap_high_l1_vipt(page, &saved_pte); + /* unmapped pages might still be cached */ + addr = kmap_atomic(page); __cpuc_flush_dcache_area(addr, PAGE_SIZE); - kunmap_high_l1_vipt(page, saved_pte); + kunmap_atomic(addr); } } diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c index c435fd9e1da9..807c0573abbe 100644 --- a/arch/arm/mm/highmem.c +++ b/arch/arm/mm/highmem.c @@ -140,90 +140,3 @@ struct page *kmap_atomic_to_page(const void *ptr) pte = TOP_PTE(vaddr); return pte_page(*pte); } - -#ifdef CONFIG_CPU_CACHE_VIPT - -#include - -/* - * The VIVT cache of a highmem page is always flushed before the page - * is unmapped. Hence unmapped highmem pages need no cache maintenance - * in that case. - * - * However unmapped pages may still be cached with a VIPT cache, and - * it is not possible to perform cache maintenance on them using physical - * addresses unfortunately. So we have no choice but to set up a temporary - * virtual mapping for that purpose. - * - * Yet this VIPT cache maintenance may be triggered from DMA support - * functions which are possibly called from interrupt context. As we don't - * want to keep interrupt disabled all the time when such maintenance is - * taking place, we therefore allow for some reentrancy by preserving and - * restoring the previous fixmap entry before the interrupted context is - * resumed. If the reentrancy depth is 0 then there is no need to restore - * the previous fixmap, and leaving the current one in place allow it to - * be reused the next time without a TLB flush (common with DMA). - */ - -static DEFINE_PER_CPU(int, kmap_high_l1_vipt_depth); - -void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte) -{ - unsigned int idx, cpu; - int *depth; - unsigned long vaddr, flags; - pte_t pte, *ptep; - - if (!in_interrupt()) - preempt_disable(); - - cpu = smp_processor_id(); - depth = &per_cpu(kmap_high_l1_vipt_depth, cpu); - - idx = KM_L1_CACHE + KM_TYPE_NR * cpu; - vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); - ptep = TOP_PTE(vaddr); - pte = mk_pte(page, kmap_prot); - - raw_local_irq_save(flags); - (*depth)++; - if (pte_val(*ptep) == pte_val(pte)) { - *saved_pte = pte; - } else { - *saved_pte = *ptep; - set_pte_ext(ptep, pte, 0); - local_flush_tlb_kernel_page(vaddr); - } - raw_local_irq_restore(flags); - - return (void *)vaddr; -} - -void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte) -{ - unsigned int idx, cpu = smp_processor_id(); - int *depth = &per_cpu(kmap_high_l1_vipt_depth, cpu); - unsigned long vaddr, flags; - pte_t pte, *ptep; - - idx = KM_L1_CACHE + KM_TYPE_NR * cpu; - vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); - ptep = TOP_PTE(vaddr); - pte = mk_pte(page, kmap_prot); - - BUG_ON(pte_val(*ptep) != pte_val(pte)); - BUG_ON(*depth <= 0); - - raw_local_irq_save(flags); - (*depth)--; - if (*depth != 0 && pte_val(pte) != pte_val(saved_pte)) { - set_pte_ext(ptep, saved_pte, 0); - local_flush_tlb_kernel_page(vaddr); - } - raw_local_irq_restore(flags); - - if (!in_interrupt()) - preempt_enable(); -} - -#endif /* CONFIG_CPU_CACHE_VIPT */ From 25cbe45440ea89a3b0f6f7ed326d3d476d53068b Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 15 Dec 2010 23:29:04 -0500 Subject: [PATCH 04/66] ARM: fix cache-xsc3l2 after stack based kmap_atomic() Since commit 3e4d3af501 "mm: stack based kmap_atomic()", it is actively wrong to rely on fixed kmap type indices (namely KM_L2_CACHE) as kmap_atomic() totally ignores them and a concurrent instance of it may happily reuse any slot for any purpose. Because kmap_atomic() is now able to deal with reentrancy, we can get rid of the ad hoc mapping here, and we even don't have to disable IRQs anymore (highmem case). While the code is made much simpler, there is a needless cache flush introduced by the usage of __kunmap_atomic(). It is not clear if the performance difference to remove that is worth the cost in code maintenance (I don't think there are that many highmem users on that platform if at all anyway). Signed-off-by: Nicolas Pitre --- arch/arm/mm/cache-xsc3l2.c | 57 ++++++++++++++------------------------ 1 file changed, 21 insertions(+), 36 deletions(-) diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c index c3154928bccd..5a32020471e3 100644 --- a/arch/arm/mm/cache-xsc3l2.c +++ b/arch/arm/mm/cache-xsc3l2.c @@ -17,14 +17,10 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include +#include #include #include #include -#include -#include -#include -#include -#include "mm.h" #define CR_L2 (1 << 26) @@ -71,16 +67,15 @@ static inline void xsc3_l2_inv_all(void) dsb(); } +static inline void l2_unmap_va(unsigned long va) +{ #ifdef CONFIG_HIGHMEM -#define l2_map_save_flags(x) raw_local_save_flags(x) -#define l2_map_restore_flags(x) raw_local_irq_restore(x) -#else -#define l2_map_save_flags(x) ((x) = 0) -#define l2_map_restore_flags(x) ((void)(x)) + if (va != -1) + kunmap_atomic((void *)va); #endif +} -static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va, - unsigned long flags) +static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va) { #ifdef CONFIG_HIGHMEM unsigned long va = prev_va & PAGE_MASK; @@ -89,17 +84,10 @@ static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va, /* * Switching to a new page. Because cache ops are * using virtual addresses only, we must put a mapping - * in place for it. We also enable interrupts for a - * short while and disable them again to protect this - * mapping. + * in place for it. */ - unsigned long idx; - raw_local_irq_restore(flags); - idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id(); - va = __fix_to_virt(FIX_KMAP_BEGIN + idx); - raw_local_irq_restore(flags | PSR_I_BIT); - set_pte_ext(TOP_PTE(va), pfn_pte(pa >> PAGE_SHIFT, PAGE_KERNEL), 0); - local_flush_tlb_kernel_page(va); + l2_unmap_va(prev_va); + va = (unsigned long)kmap_atomic_pfn(pa >> PAGE_SHIFT); } return va + (pa_offset >> (32 - PAGE_SHIFT)); #else @@ -109,7 +97,7 @@ static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va, static void xsc3_l2_inv_range(unsigned long start, unsigned long end) { - unsigned long vaddr, flags; + unsigned long vaddr; if (start == 0 && end == -1ul) { xsc3_l2_inv_all(); @@ -117,13 +105,12 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end) } vaddr = -1; /* to force the first mapping */ - l2_map_save_flags(flags); /* * Clean and invalidate partial first cache line. */ if (start & (CACHE_LINE_SIZE - 1)) { - vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr, flags); + vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr); xsc3_l2_clean_mva(vaddr); xsc3_l2_inv_mva(vaddr); start = (start | (CACHE_LINE_SIZE - 1)) + 1; @@ -133,7 +120,7 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end) * Invalidate all full cache lines between 'start' and 'end'. */ while (start < (end & ~(CACHE_LINE_SIZE - 1))) { - vaddr = l2_map_va(start, vaddr, flags); + vaddr = l2_map_va(start, vaddr); xsc3_l2_inv_mva(vaddr); start += CACHE_LINE_SIZE; } @@ -142,31 +129,30 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end) * Clean and invalidate partial last cache line. */ if (start < end) { - vaddr = l2_map_va(start, vaddr, flags); + vaddr = l2_map_va(start, vaddr); xsc3_l2_clean_mva(vaddr); xsc3_l2_inv_mva(vaddr); } - l2_map_restore_flags(flags); + l2_unmap_va(vaddr); dsb(); } static void xsc3_l2_clean_range(unsigned long start, unsigned long end) { - unsigned long vaddr, flags; + unsigned long vaddr; vaddr = -1; /* to force the first mapping */ - l2_map_save_flags(flags); start &= ~(CACHE_LINE_SIZE - 1); while (start < end) { - vaddr = l2_map_va(start, vaddr, flags); + vaddr = l2_map_va(start, vaddr); xsc3_l2_clean_mva(vaddr); start += CACHE_LINE_SIZE; } - l2_map_restore_flags(flags); + l2_unmap_va(vaddr); dsb(); } @@ -193,7 +179,7 @@ static inline void xsc3_l2_flush_all(void) static void xsc3_l2_flush_range(unsigned long start, unsigned long end) { - unsigned long vaddr, flags; + unsigned long vaddr; if (start == 0 && end == -1ul) { xsc3_l2_flush_all(); @@ -201,17 +187,16 @@ static void xsc3_l2_flush_range(unsigned long start, unsigned long end) } vaddr = -1; /* to force the first mapping */ - l2_map_save_flags(flags); start &= ~(CACHE_LINE_SIZE - 1); while (start < end) { - vaddr = l2_map_va(start, vaddr, flags); + vaddr = l2_map_va(start, vaddr); xsc3_l2_clean_mva(vaddr); xsc3_l2_inv_mva(vaddr); start += CACHE_LINE_SIZE; } - l2_map_restore_flags(flags); + l2_unmap_va(vaddr); dsb(); } From 6d3e6d3640052cac958d61c44597cc216f6ee09f Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 16 Dec 2010 14:56:34 -0500 Subject: [PATCH 05/66] ARM: fix cache-feroceon-l2 after stack based kmap_atomic() Since commit 3e4d3af501 "mm: stack based kmap_atomic()", it is actively wrong to rely on fixed kmap type indices (namely KM_L2_CACHE) as kmap_atomic() totally ignores them and a concurrent instance of it may happily reuse any slot for any purpose. Because kmap_atomic() is now able to deal with reentrancy, we can get rid of the ad hoc mapping here. While the code is made much simpler, there is a needless cache flush introduced by the usage of __kunmap_atomic(). It is not clear if the performance difference to remove that is worth the cost in code maintenance (I don't think there are that many highmem users on that platform anyway) but that should be reconsidered when/if someone cares enough to do some measurements. Signed-off-by: Nicolas Pitre --- arch/arm/mm/cache-feroceon-l2.c | 37 +++++++++++++++++---------------- 1 file changed, 19 insertions(+), 18 deletions(-) diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c index 6e77c042d8e9..e0b0e7a4ec68 100644 --- a/arch/arm/mm/cache-feroceon-l2.c +++ b/arch/arm/mm/cache-feroceon-l2.c @@ -13,13 +13,9 @@ */ #include +#include #include -#include -#include -#include -#include #include -#include "mm.h" /* * Low-level cache maintenance operations. @@ -39,27 +35,30 @@ * between which we don't want to be preempted. */ -static inline unsigned long l2_start_va(unsigned long paddr) +static inline unsigned long l2_get_va(unsigned long paddr) { #ifdef CONFIG_HIGHMEM /* - * Let's do our own fixmap stuff in a minimal way here. * Because range ops can't be done on physical addresses, * we simply install a virtual mapping for it only for the * TLB lookup to occur, hence no need to flush the untouched - * memory mapping. This is protected with the disabling of - * interrupts by the caller. + * memory mapping afterwards (note: a cache flush may happen + * in some circumstances depending on the path taken in kunmap_atomic). */ - unsigned long idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id(); - unsigned long vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); - set_pte_ext(TOP_PTE(vaddr), pfn_pte(paddr >> PAGE_SHIFT, PAGE_KERNEL), 0); - local_flush_tlb_kernel_page(vaddr); - return vaddr + (paddr & ~PAGE_MASK); + void *vaddr = kmap_atomic_pfn(paddr >> PAGE_SHIFT); + return (unsigned long)vaddr + (paddr & ~PAGE_MASK); #else return __phys_to_virt(paddr); #endif } +static inline void l2_put_va(unsigned long vaddr) +{ +#ifdef CONFIG_HIGHMEM + kunmap_atomic((void *)vaddr); +#endif +} + static inline void l2_clean_pa(unsigned long addr) { __asm__("mcr p15, 1, %0, c15, c9, 3" : : "r" (addr)); @@ -76,13 +75,14 @@ static inline void l2_clean_pa_range(unsigned long start, unsigned long end) */ BUG_ON((start ^ end) >> PAGE_SHIFT); - raw_local_irq_save(flags); - va_start = l2_start_va(start); + va_start = l2_get_va(start); va_end = va_start + (end - start); + raw_local_irq_save(flags); __asm__("mcr p15, 1, %0, c15, c9, 4\n\t" "mcr p15, 1, %1, c15, c9, 5" : : "r" (va_start), "r" (va_end)); raw_local_irq_restore(flags); + l2_put_va(va_start); } static inline void l2_clean_inv_pa(unsigned long addr) @@ -106,13 +106,14 @@ static inline void l2_inv_pa_range(unsigned long start, unsigned long end) */ BUG_ON((start ^ end) >> PAGE_SHIFT); - raw_local_irq_save(flags); - va_start = l2_start_va(start); + va_start = l2_get_va(start); va_end = va_start + (end - start); + raw_local_irq_save(flags); __asm__("mcr p15, 1, %0, c15, c11, 4\n\t" "mcr p15, 1, %1, c15, c11, 5" : : "r" (va_start), "r" (va_end)); raw_local_irq_restore(flags); + l2_put_va(va_start); } static inline void l2_inv_all(void) From 06f37751af77192b424b2b0ff17dc08de65faba0 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 14 Dec 2010 10:06:46 -0800 Subject: [PATCH 06/66] drm/i915: Set the required VFMUNIT clock gating disable on Ironlake. It's required by the specs, but we don't know why. Let's not find out why. Signed-off-by: Eric Anholt Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_reg.h | 3 +++ drivers/gpu/drm/i915/intel_display.c | 2 ++ 2 files changed, 5 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 878fc766a12c..8470a972f1bb 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2471,6 +2471,9 @@ # define MARIUNIT_CLOCK_GATE_DISABLE (1 << 18) # define SVSMUNIT_CLOCK_GATE_DISABLE (1 << 1) +#define PCH_3DCGDIS1 0x46024 +# define VFMUNIT_CLOCK_GATE_DISABLE (1 << 11) + #define FDI_PLL_FREQ_CTL 0x46030 #define FDI_PLL_FREQ_CHANGE_REQUEST (1<<24) #define FDI_PLL_FREQ_LOCK_LIMIT_MASK 0xfff00 diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index d9b7092439ef..97e374ec7f72 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5825,6 +5825,8 @@ void intel_init_clock_gating(struct drm_device *dev) I915_WRITE(PCH_3DCGDIS0, MARIUNIT_CLOCK_GATE_DISABLE | SVSMUNIT_CLOCK_GATE_DISABLE); + I915_WRITE(PCH_3DCGDIS1, + VFMUNIT_CLOCK_GATE_DISABLE); } I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate); From f797d22121404eac7b63f1291409f96bcab51c11 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 23 Dec 2010 09:43:48 +0000 Subject: [PATCH 07/66] drm/i915/sdvo: Add hdmi connector properties after initing the connector MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=25012 Reported-by: Tõnu Raitviir Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_sdvo.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 27e63abf2a73..6bc42fa2a6ec 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2040,13 +2040,14 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device) SDVO_COLORIMETRY_RGB256); connector->connector_type = DRM_MODE_CONNECTOR_HDMIA; - intel_sdvo_add_hdmi_properties(intel_sdvo_connector); intel_sdvo->is_hdmi = true; } intel_sdvo->base.clone_mask = ((1 << INTEL_SDVO_NON_TV_CLONE_BIT) | (1 << INTEL_ANALOG_CLONE_BIT)); intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo); + if (intel_sdvo->is_hdmi) + intel_sdvo_add_hdmi_properties(intel_sdvo_connector); return true; } From 63ee41d794d9c555f84205517a68509848988760 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 20 Dec 2010 18:40:06 -0800 Subject: [PATCH 08/66] drm/i915, intel_ips: When i915 loads after IPS, make IPS relink to i915. The IPS driver is designed to be able to run detached from i915 and just not enable GPU turbo in that case, in order to avoid module dependencies between the two drivers. This means that we don't know what the load order between the two is going to be, and we had previously only supported IPS after (optionally) i915, but not i915 after IPS. If the wrong order was chosen, you'd get no GPU turbo, and something like half the possible graphics performance. Signed-off-by: Eric Anholt Signed-off-by: Chris Wilson Cc: stable@kernel.org --- drivers/gpu/drm/i915/i915_dma.c | 23 ++++++++++++++++++++ drivers/platform/x86/intel_ips.c | 36 +++++++++++++++++++++++++++++--- drivers/platform/x86/intel_ips.h | 21 +++++++++++++++++++ 3 files changed, 77 insertions(+), 3 deletions(-) create mode 100644 drivers/platform/x86/intel_ips.h diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index e6800819bca8..cb900dc83d95 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -34,6 +34,7 @@ #include "i915_drm.h" #include "i915_drv.h" #include "i915_trace.h" +#include "../../../platform/x86/intel_ips.h" #include #include #include @@ -1870,6 +1871,26 @@ out_unlock: } EXPORT_SYMBOL_GPL(i915_gpu_turbo_disable); +/** + * Tells the intel_ips driver that the i915 driver is now loaded, if + * IPS got loaded first. + * + * This awkward dance is so that neither module has to depend on the + * other in order for IPS to do the appropriate communication of + * GPU turbo limits to i915. + */ +static void +ips_ping_for_i915_load(void) +{ + void (*link)(void); + + link = symbol_get(ips_link_to_i915_driver); + if (link) { + link(); + symbol_put(ips_link_to_i915_driver); + } +} + /** * i915_driver_load - setup chip and create an initial config * @dev: DRM device @@ -2075,6 +2096,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) dev_priv->mchdev_lock = &mchdev_lock; spin_unlock(&mchdev_lock); + ips_ping_for_i915_load(); + return 0; out_workqueue_free: diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c index c44a5e8b8b82..f0b3ad13c273 100644 --- a/drivers/platform/x86/intel_ips.c +++ b/drivers/platform/x86/intel_ips.c @@ -75,6 +75,7 @@ #include #include #include +#include "intel_ips.h" #define PCI_DEVICE_ID_INTEL_THERMAL_SENSOR 0x3b32 @@ -245,6 +246,7 @@ #define thm_writel(off, val) writel((val), ips->regmap + (off)) static const int IPS_ADJUST_PERIOD = 5000; /* ms */ +static bool late_i915_load = false; /* For initial average collection */ static const int IPS_SAMPLE_PERIOD = 200; /* ms */ @@ -339,6 +341,9 @@ struct ips_driver { u64 orig_turbo_ratios; }; +static bool +ips_gpu_turbo_enabled(struct ips_driver *ips); + /** * ips_cpu_busy - is CPU busy? * @ips: IPS driver struct @@ -517,7 +522,7 @@ static void ips_disable_cpu_turbo(struct ips_driver *ips) */ static bool ips_gpu_busy(struct ips_driver *ips) { - if (!ips->gpu_turbo_enabled) + if (!ips_gpu_turbo_enabled(ips)) return false; return ips->gpu_busy(); @@ -532,7 +537,7 @@ static bool ips_gpu_busy(struct ips_driver *ips) */ static void ips_gpu_raise(struct ips_driver *ips) { - if (!ips->gpu_turbo_enabled) + if (!ips_gpu_turbo_enabled(ips)) return; if (!ips->gpu_raise()) @@ -549,7 +554,7 @@ static void ips_gpu_raise(struct ips_driver *ips) */ static void ips_gpu_lower(struct ips_driver *ips) { - if (!ips->gpu_turbo_enabled) + if (!ips_gpu_turbo_enabled(ips)) return; if (!ips->gpu_lower()) @@ -1454,6 +1459,31 @@ out_err: return false; } +static bool +ips_gpu_turbo_enabled(struct ips_driver *ips) +{ + if (!ips->gpu_busy && late_i915_load) { + if (ips_get_i915_syms(ips)) { + dev_info(&ips->dev->dev, + "i915 driver attached, reenabling gpu turbo\n"); + ips->gpu_turbo_enabled = !(thm_readl(THM_HTS) & HTS_GTD_DIS); + } + } + + return ips->gpu_turbo_enabled; +} + +void +ips_link_to_i915_driver() +{ + /* We can't cleanly get at the various ips_driver structs from + * this caller (the i915 driver), so just set a flag saying + * that it's time to try getting the symbols again. + */ + late_i915_load = true; +} +EXPORT_SYMBOL_GPL(ips_link_to_i915_driver); + static DEFINE_PCI_DEVICE_TABLE(ips_id_table) = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_THERMAL_SENSOR), }, diff --git a/drivers/platform/x86/intel_ips.h b/drivers/platform/x86/intel_ips.h new file mode 100644 index 000000000000..73299beff5b3 --- /dev/null +++ b/drivers/platform/x86/intel_ips.h @@ -0,0 +1,21 @@ +/* + * Copyright (c) 2010 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + */ + +void ips_link_to_i915_driver(void); From 4d3024428f5c3ef5295e6f6fb257ae118b3f93a1 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 14 Dec 2010 19:21:29 +0000 Subject: [PATCH 09/66] drm/i915: Verify Ironlake eDP presence on DP_A using the capability fuse Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_reg.h | 7 +++++++ drivers/gpu/drm/i915/intel_display.c | 19 ++++++++++++++++++- 2 files changed, 25 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 8470a972f1bb..cb8f43429279 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2591,6 +2591,13 @@ #define ILK_DISPLAY_CHICKEN2 0x42004 #define ILK_DPARB_GATE (1<<22) #define ILK_VSDPFD_FULL (1<<21) +#define ILK_DISPLAY_CHICKEN_FUSES 0x42014 +#define ILK_INTERNAL_GRAPHICS_DISABLE (1<<31) +#define ILK_INTERNAL_DISPLAY_DISABLE (1<<30) +#define ILK_DISPLAY_DEBUG_DISABLE (1<<29) +#define ILK_HDCP_DISABLE (1<<25) +#define ILK_eDP_A_DISABLE (1<<24) +#define ILK_DESKTOP (1<<23) #define ILK_DSPCLK_GATE 0x42020 #define ILK_DPARB_CLK_GATE (1<<5) /* According to spec this bit 7/8/9 of 0x42020 should be set to enable FBC */ diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 97e374ec7f72..fca523288aca 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5379,6 +5379,23 @@ static int intel_encoder_clones(struct drm_device *dev, int type_mask) return index_mask; } +static bool has_edp_a(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (!IS_MOBILE(dev)) + return false; + + if ((I915_READ(DP_A) & DP_DETECTED) == 0) + return false; + + if (IS_GEN5(dev) && + (I915_READ(ILK_DISPLAY_CHICKEN_FUSES) & ILK_eDP_A_DISABLE)) + return false; + + return true; +} + static void intel_setup_outputs(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -5396,7 +5413,7 @@ static void intel_setup_outputs(struct drm_device *dev) if (HAS_PCH_SPLIT(dev)) { dpd_is_edp = intel_dpd_is_edp(dev); - if (IS_MOBILE(dev) && (I915_READ(DP_A) & DP_DETECTED)) + if (has_edp_a(dev)) intel_dp_init(dev, DP_A); if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED)) From 537de3a67c0c86586eacffde40673b727242dc3a Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 22 Dec 2010 04:52:05 +0100 Subject: [PATCH 10/66] ARM: 6536/1: Add missing SZ_{32,64,128} ... and also remove misleading comment stating that this header is auto-generated. Signed-off-by: Stephen Warren Acked-by: Uwe Kleine-Knig Signed-off-by: Russell King --- arch/arm/include/asm/sizes.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h index 4fc1565e4f93..316bb2b2be3d 100644 --- a/arch/arm/include/asm/sizes.h +++ b/arch/arm/include/asm/sizes.h @@ -13,9 +13,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -/* DO NOT EDIT!! - this file automatically generated - * from .s file by awk -f s2h.awk - */ /* Size definitions * Copyright (C) ARM Limited 1998. All rights reserved. */ @@ -25,6 +22,9 @@ /* handy sizes */ #define SZ_16 0x00000010 +#define SZ_32 0x00000020 +#define SZ_64 0x00000040 +#define SZ_128 0x00000080 #define SZ_256 0x00000100 #define SZ_512 0x00000200 From 875728807ff001b67a1e0535de5ad2cd3c41d47c Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 22 Dec 2010 09:18:29 +0100 Subject: [PATCH 11/66] ARM: 6537/1: update Nomadik, U300 and Ux500 maintainers Adding in self as maintainer for Nomadik and Ux500, I'm running an active -next tree for that stuff now. Extend file matchers to cover a few more relevant drivers and add git references. Cc: Alessandro Rubini Acked-by: Srinidhi Kasagar Signed-off-by: Linus Walleij Signed-off-by: Russell King --- MAINTAINERS | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 6a588873cf8d..4323f8fe38a6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -792,11 +792,14 @@ S: Maintained ARM/NOMADIK ARCHITECTURE M: Alessandro Rubini +M: Linus Walleij M: STEricsson L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-nomadik/ F: arch/arm/plat-nomadik/ +F: drivers/i2c/busses/i2c-nomadik.c +T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT M: Nelson Castillo @@ -998,12 +1001,24 @@ F: drivers/i2c/busses/i2c-stu300.c F: drivers/rtc/rtc-coh901331.c F: drivers/watchdog/coh901327_wdt.c F: drivers/dma/coh901318* +F: drivers/mfd/ab3100* +F: drivers/rtc/rtc-ab3100.c +F: drivers/rtc/rtc-coh901331.c +T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git -ARM/U8500 ARM ARCHITECTURE +ARM/Ux500 ARM ARCHITECTURE M: Srinidhi Kasagar +M: Linus Walleij L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-ux500/ +F: drivers/dma/ste_dma40* +F: drivers/mfd/ab3550* +F: drivers/mfd/abx500* +F: drivers/mfd/ab8500* +F: drivers/mfd/stmpe* +F: drivers/rtc/rtc-ab8500.c +T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git ARM/VFP SUPPORT M: Russell King From d13e5edd7284bedcf5952e1b6490e39ad843cb91 Mon Sep 17 00:00:00 2001 From: Todd Android Poynor Date: Thu, 23 Dec 2010 01:52:44 +0100 Subject: [PATCH 12/66] ARM: 6540/1: Stop irqsoff trace on return to user If the irqsoff tracer is in use, stop tracing the interrupt disable interval when returning to userspace. Tracing userspace execution time as interrupts disabled time is not helpful for kernel performance analysis purposes. Only do so if the irqsoff tracer is enabled, to avoid overhead for lockdep, which doesn't care. Signed-off-by: Todd Poynor Signed-off-by: Russell King --- arch/arm/kernel/entry-common.S | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 8bfa98757cd2..80bf8cd88d7c 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -29,6 +29,9 @@ ret_fast_syscall: ldr r1, [tsk, #TI_FLAGS] tst r1, #_TIF_WORK_MASK bne fast_work_pending +#if defined(CONFIG_IRQSOFF_TRACER) + asm_trace_hardirqs_on +#endif /* perform architecture specific actions before user return */ arch_ret_to_user r1, lr @@ -65,6 +68,9 @@ ret_slow_syscall: tst r1, #_TIF_WORK_MASK bne work_pending no_work_pending: +#if defined(CONFIG_IRQSOFF_TRACER) + asm_trace_hardirqs_on +#endif /* perform architecture specific actions before user return */ arch_ret_to_user r1, lr From 12f188f2e59394ec1f1c8c0a4439f48ec16bc336 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 19 Dec 2010 08:17:50 +0000 Subject: [PATCH 13/66] ueagle-atm: fix PHY signal initialization race A race exists when initializing ueagle-atm devices where the generic atm device may not yet be created before the driver attempts to initialize it's PHY signal state, which checks whether the atm device has been created or not. This often causes the sysfs 'carrier' attribute to be '1' even though no signal has actually been found. uea_probe usbatm_usb_probe driver->bind (uea_bind) uea_boot kthread_run(uea_kthread) uea_kthread usbatm_atm_init uea_start_reset atm_dev_register UPDATE_ATM_SIGNAL UPDATE_ATM_SIGNAL checks whether the ATM device has been created and if not, will not update the PHY signal state. Because of the race that does not always happen in time, and the PHY signal state remains ATM_PHY_SIG_FOUND even though no signal exists. To fix the race, just create the kthread during initialization, and only after initialization is complete, start the thread that reboots the device and initializes PHY state. [ 3030.490931] uea_probe: calling usbatm_usb_probe [ 3030.490946] ueagle-atm 8-2:1.0: usbatm_usb_probe: trying driver ueagle-atm with vendor=1110, product=9031, ifnum 0 [ 3030.493691] uea_bind: setting usbatm [ 3030.496932] usb 8-2: [ueagle-atm] using iso mode [ 3030.497283] ueagle-atm 8-2:1.0: usbatm_usb_probe: using 3021 byte buffer for rx channel 0xffff880125953508 [ 3030.497292] usb 8-2: [ueagle-atm] (re)booting started [ 3030.497298] uea_start_reset: atm dev (null) [ 3030.497306] ueagle-atm 8-2:1.0: usbatm_usb_probe: using 3392 byte buffer for tx channel 0xffff8801259535b8 [ 3030.497374] usbatm_usb_probe: about to init [ 3030.497379] usbatm_usb_probe: calling usbatm_atm_init [ 3030.497384] usbatm_atm_init: creating atm device! Signed-off-by: Dan Williams Signed-off-by: David S. Miller --- drivers/usb/atm/ueagle-atm.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index 44447f54942f..99ac70e32556 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -2206,8 +2206,11 @@ static int uea_boot(struct uea_softc *sc) goto err1; } - sc->kthread = kthread_run(uea_kthread, sc, "ueagle-atm"); - if (sc->kthread == ERR_PTR(-ENOMEM)) { + /* Create worker thread, but don't start it here. Start it after + * all usbatm generic initialization is done. + */ + sc->kthread = kthread_create(uea_kthread, sc, "ueagle-atm"); + if (IS_ERR(sc->kthread)) { uea_err(INS_TO_USBDEV(sc), "failed to create thread\n"); goto err2; } @@ -2624,6 +2627,7 @@ static struct usbatm_driver uea_usbatm_driver = { static int uea_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *usb = interface_to_usbdev(intf); + int ret; uea_enters(usb); uea_info(usb, "ADSL device founded vid (%#X) pid (%#X) Rev (%#X): %s\n", @@ -2637,7 +2641,19 @@ static int uea_probe(struct usb_interface *intf, const struct usb_device_id *id) if (UEA_IS_PREFIRM(id)) return uea_load_firmware(usb, UEA_CHIP_VERSION(id)); - return usbatm_usb_probe(intf, id, &uea_usbatm_driver); + ret = usbatm_usb_probe(intf, id, &uea_usbatm_driver); + if (ret == 0) { + struct usbatm_data *usbatm = usb_get_intfdata(intf); + struct uea_softc *sc = usbatm->driver_data; + + /* Ensure carrier is initialized to off as early as possible */ + UPDATE_ATM_SIGNAL(ATM_PHY_SIG_LOST); + + /* Only start the worker thread when all init is done */ + wake_up_process(sc->kthread); + } + + return ret; } static void uea_disconnect(struct usb_interface *intf) From c4711786986af0cce654f493426ee0a1055e4b17 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Mon, 20 Dec 2010 09:02:37 +0000 Subject: [PATCH 14/66] ehea: Avoid changing vlan flags This patch avoids disabling the vlan flags using ethtool. Signed-off-by: Breno Leitao Signed-off-by: David S. Miller --- drivers/net/ehea/ehea_ethtool.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/ehea/ehea_ethtool.c b/drivers/net/ehea/ehea_ethtool.c index 1f37ee6b2a26..d6cf502906cf 100644 --- a/drivers/net/ehea/ehea_ethtool.c +++ b/drivers/net/ehea/ehea_ethtool.c @@ -263,6 +263,13 @@ static void ehea_get_ethtool_stats(struct net_device *dev, static int ehea_set_flags(struct net_device *dev, u32 data) { + /* Avoid changing the VLAN flags */ + if ((data & (ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN)) != + (ethtool_op_get_flags(dev) & (ETH_FLAG_RXVLAN | + ETH_FLAG_TXVLAN))){ + return -EINVAL; + } + return ethtool_op_set_flags(dev, data, ETH_FLAG_LRO | ETH_FLAG_TXVLAN | ETH_FLAG_RXVLAN); From d39cd5e99a0ad88aba6793fb5e5f34e29cda6e6f Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Mon, 20 Dec 2010 17:58:33 +0000 Subject: [PATCH 15/66] ppp: allow disabling multilink protocol ID compression Linux would not connect to other router running old version Cisco IOS (12.0). This is most likely a bug in that version of IOS, since it is fixed in later versions. As a workaround this patch allows a module parameter to be set to disable compressing the protocol ID. See: https://bugzilla.vyatta.com/show_bug.cgi?id=3979 RFC 1990 allows an implementation to formulate MP fragments as if protocol compression had been negotiated. This allows us to always send compressed protocol IDs. But some implementations don't accept MP fragments with compressed protocol IDs. This parameter allows us to interoperate with them. The default value of the configurable parameter is the same as the current behavior: protocol compression is enabled. If protocol compression is disabled we will not send compressed protocol IDs. This is based on an earlier patch by Bob Gilligan (using a sysctl). Module parameter is writable to allow for enabling even if ppp is already loaded for other uses. Signed-off-by: Stephen Hemminger Acked-by: Eric Dumazet Acked-by: Paul Mackerras Signed-off-by: David S. Miller --- drivers/net/ppp_generic.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 39659976a1ac..89294b43c4a9 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -1285,6 +1285,11 @@ ppp_push(struct ppp *ppp) } #ifdef CONFIG_PPP_MULTILINK +static bool mp_protocol_compress __read_mostly = true; +module_param(mp_protocol_compress, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(mp_protocol_compress, + "compress protocol id in multilink fragments"); + /* * Divide a packet to be transmitted into fragments and * send them out the individual links. @@ -1347,10 +1352,10 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb) if (nfree == 0 || nfree < navail / 2) return 0; /* can't take now, leave it in xmit_pending */ - /* Do protocol field compression (XXX this should be optional) */ + /* Do protocol field compression */ p = skb->data; len = skb->len; - if (*p == 0) { + if (*p == 0 && mp_protocol_compress) { ++p; --len; } From 4a5fc4e179d79c79ad87bfc12a2d7e9b2371e40c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 23 Dec 2010 19:17:34 +0000 Subject: [PATCH 16/66] skfp: testing the wrong variable in skfp_driver_init() The intent here was to test if the allocation failed but we tested "SharedMemSize" instead of "SharedMemAddr" by mistake. Signed-off-by: Dan Carpenter Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/skfp/skfddi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c index 0a66fed52e8e..16c62659cdd9 100644 --- a/drivers/net/skfp/skfddi.c +++ b/drivers/net/skfp/skfddi.c @@ -412,7 +412,7 @@ static int skfp_driver_init(struct net_device *dev) bp->SharedMemAddr = pci_alloc_consistent(&bp->pdev, bp->SharedMemSize, &bp->SharedMemDMA); - if (!bp->SharedMemSize) { + if (!bp->SharedMemAddr) { printk("could not allocate mem for "); printk("hardware module: %ld byte\n", bp->SharedMemSize); From 7f984b55acb6530bf854bfcac13104228f3336c1 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 28 Dec 2010 21:08:57 +0100 Subject: [PATCH 17/66] ASoC: codecs: Add missing control_type initialization Some codec drivers do not initialize the control_type field in their private device struct, but still use it when calling snd_soc_codec_set_cache_io. This patch fixes the issue by properly initializing it in the drivers probe functions. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown Cc: stable@kernel.org (for 2.6.37 only) --- sound/soc/codecs/wm8940.c | 1 + sound/soc/codecs/wm8955.c | 1 + sound/soc/codecs/wm8960.c | 1 + sound/soc/codecs/wm8971.c | 1 + sound/soc/codecs/wm9081.c | 1 + 5 files changed, 5 insertions(+) diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c index 2cb16f895c46..23086e2c976a 100644 --- a/sound/soc/codecs/wm8940.c +++ b/sound/soc/codecs/wm8940.c @@ -768,6 +768,7 @@ static __devinit int wm8940_i2c_probe(struct i2c_client *i2c, i2c_set_clientdata(i2c, wm8940); wm8940->control_data = i2c; + wm8940->control_type = SND_SOC_I2C; ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm8940, &wm8940_dai, 1); diff --git a/sound/soc/codecs/wm8955.c b/sound/soc/codecs/wm8955.c index 9cbab8e1de01..a2ad91d6078a 100644 --- a/sound/soc/codecs/wm8955.c +++ b/sound/soc/codecs/wm8955.c @@ -1003,6 +1003,7 @@ static __devinit int wm8955_i2c_probe(struct i2c_client *i2c, return -ENOMEM; i2c_set_clientdata(i2c, wm8955); + wm8955->control_type = SND_SOC_I2C; ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm8955, &wm8955_dai, 1); diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index 21986c42272f..ff6ff2f529d2 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -1013,6 +1013,7 @@ static __devinit int wm8960_i2c_probe(struct i2c_client *i2c, return -ENOMEM; i2c_set_clientdata(i2c, wm8960); + wm8960->control_type = SND_SOC_I2C; wm8960->control_data = i2c; ret = snd_soc_register_codec(&i2c->dev, diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c index 63f6dbf5d070..9f18db6e167c 100644 --- a/sound/soc/codecs/wm8971.c +++ b/sound/soc/codecs/wm8971.c @@ -718,6 +718,7 @@ static __devinit int wm8971_i2c_probe(struct i2c_client *i2c, if (wm8971 == NULL) return -ENOMEM; + wm8971->control_type = SND_SOC_I2C; i2c_set_clientdata(i2c, wm8971); ret = snd_soc_register_codec(&i2c->dev, diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c index ecc7c37180c7..a486670966bd 100644 --- a/sound/soc/codecs/wm9081.c +++ b/sound/soc/codecs/wm9081.c @@ -1335,6 +1335,7 @@ static __devinit int wm9081_i2c_probe(struct i2c_client *i2c, return -ENOMEM; i2c_set_clientdata(i2c, wm9081); + wm9081->control_type = SND_SOC_I2C; wm9081->control_data = i2c; ret = snd_soc_register_codec(&i2c->dev, From d24eb0db9c8a7ceecae860bdc636ed1e8a86943a Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 28 Dec 2010 21:37:56 +0100 Subject: [PATCH 18/66] ASoC: codecs: max98088: Fix register cache incoherency The multi-component patch(commit f0fba2ad1) moved the allocation of the register cache from the driver to the ASoC core. Most drivers where adjusted to this, but the max98088 driver still uses its own register cache for its private functions, while functions from the ASoC core use the generic cache. Thus we end up with two from each other incoherent caches, which can lead to undefined behaviour. This patch fixes the issue by changing the max98088 driver to use the generic register cache in its private functions. Signed-off-by: Lars-Peter Clausen Cc: Peter Hsiang Signed-off-by: Mark Brown Cc: stable@kernel.org (for 2.6.37 only) --- sound/soc/codecs/max98088.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/max98088.c b/sound/soc/codecs/max98088.c index d63e28773eb1..6447dbb2f123 100644 --- a/sound/soc/codecs/max98088.c +++ b/sound/soc/codecs/max98088.c @@ -40,7 +40,6 @@ struct max98088_cdata { }; struct max98088_priv { - u8 reg_cache[M98088_REG_CNT]; enum max98088_type devtype; void *control_data; struct max98088_pdata *pdata; @@ -1588,7 +1587,7 @@ static int max98088_dai2_set_fmt(struct snd_soc_dai *codec_dai, static void max98088_sync_cache(struct snd_soc_codec *codec) { - struct max98088_priv *max98088 = snd_soc_codec_get_drvdata(codec); + u16 *reg_cache = codec->reg_cache; int i; if (!codec->cache_sync) @@ -1599,14 +1598,14 @@ static void max98088_sync_cache(struct snd_soc_codec *codec) /* write back cached values if they're writeable and * different from the hardware default. */ - for (i = 1; i < ARRAY_SIZE(max98088->reg_cache); i++) { + for (i = 1; i < codec->driver->reg_cache_size; i++) { if (!max98088_access[i].writable) continue; - if (max98088->reg_cache[i] == max98088_reg[i]) + if (reg_cache[i] == max98088_reg[i]) continue; - snd_soc_write(codec, i, max98088->reg_cache[i]); + snd_soc_write(codec, i, reg_cache[i]); } codec->cache_sync = 0; @@ -1951,7 +1950,6 @@ static int max98088_probe(struct snd_soc_codec *codec) int ret = 0; codec->cache_sync = 1; - memcpy(codec->reg_cache, max98088_reg, sizeof(max98088_reg)); ret = snd_soc_codec_set_cache_io(codec, 8, 8, SND_SOC_I2C); if (ret != 0) { From beebca312009e9567d5e0229ea6b82bdf9a864cf Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 28 Dec 2010 21:37:57 +0100 Subject: [PATCH 19/66] ASoC: codecs: wm8523: Fix register cache incoherency The multi-component patch(commit f0fba2ad1) moved the allocation of the register cache from the driver to the ASoC core. Most drivers where adjusted to this, but the wm8523 driver still uses its own register cache for its private functions, while functions from the ASoC core use the generic cache. Thus we end up with two from each other incoherent caches, which can lead to undefined behaviour. This patch fixes the issue by changing the wm8523 driver to use the generic register cache in its private functions. Signed-off-by: Lars-Peter Clausen Cc: Ian Lartey Cc: Dimitris Papastamos Signed-off-by: Mark Brown Cc: stable@kernel.org (for 2.6.37 only) --- sound/soc/codecs/wm8523.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/wm8523.c b/sound/soc/codecs/wm8523.c index 9a433a5396cb..deca79ea2b4b 100644 --- a/sound/soc/codecs/wm8523.c +++ b/sound/soc/codecs/wm8523.c @@ -41,7 +41,6 @@ static const char *wm8523_supply_names[WM8523_NUM_SUPPLIES] = { /* codec private data */ struct wm8523_priv { enum snd_soc_control_type control_type; - u16 reg_cache[WM8523_REGISTER_COUNT]; struct regulator_bulk_data supplies[WM8523_NUM_SUPPLIES]; unsigned int sysclk; unsigned int rate_constraint_list[WM8523_NUM_RATES]; @@ -314,6 +313,7 @@ static int wm8523_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec); + u16 *reg_cache = codec->reg_cache; int ret, i; switch (level) { @@ -344,7 +344,7 @@ static int wm8523_set_bias_level(struct snd_soc_codec *codec, /* Sync back default/cached values */ for (i = WM8523_AIF_CTRL1; i < WM8523_MAX_REGISTER; i++) - snd_soc_write(codec, i, wm8523->reg_cache[i]); + snd_soc_write(codec, i, reg_cache[i]); msleep(100); @@ -414,6 +414,7 @@ static int wm8523_resume(struct snd_soc_codec *codec) static int wm8523_probe(struct snd_soc_codec *codec) { struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec); + u16 *reg_cache = codec->reg_cache; int ret, i; codec->hw_write = (hw_write_t)i2c_master_send; @@ -470,8 +471,8 @@ static int wm8523_probe(struct snd_soc_codec *codec) } /* Change some default settings - latch VU and enable ZC */ - wm8523->reg_cache[WM8523_DAC_GAINR] |= WM8523_DACR_VU; - wm8523->reg_cache[WM8523_DAC_CTRL3] |= WM8523_ZC; + reg_cache[WM8523_DAC_GAINR] |= WM8523_DACR_VU; + reg_cache[WM8523_DAC_CTRL3] |= WM8523_ZC; wm8523_set_bias_level(codec, SND_SOC_BIAS_STANDBY); From 52ca353bc8597dcc1d6d7abc03eecc1b452d79c9 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 28 Dec 2010 21:37:58 +0100 Subject: [PATCH 20/66] ASoC: codecs: wm8741: Fix register cache incoherency The multi-component patch(commit f0fba2ad1) moved the allocation of the register cache from the driver to the ASoC core. Most drivers where adjusted to this, but the wm8741 driver still uses its own register cache for its private functions, while functions from the ASoC core use the generic cache. Thus we end up with two from each other incoherent caches, which can lead to undefined behaviour. This patch fixes the issue by changing the wm8741 driver to use the generic register cache in its private functions. Signed-off-by: Lars-Peter Clausen Cc: Ian Lartey Cc: Dimitris Papastamos Signed-off-by: Mark Brown Cc: stable@kernel.org (for 2.6.37 only) --- sound/soc/codecs/wm8741.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/wm8741.c b/sound/soc/codecs/wm8741.c index 90e31e9aa6f7..aea60ef8aba7 100644 --- a/sound/soc/codecs/wm8741.c +++ b/sound/soc/codecs/wm8741.c @@ -41,7 +41,6 @@ static const char *wm8741_supply_names[WM8741_NUM_SUPPLIES] = { /* codec private data */ struct wm8741_priv { enum snd_soc_control_type control_type; - u16 reg_cache[WM8741_REGISTER_COUNT]; struct regulator_bulk_data supplies[WM8741_NUM_SUPPLIES]; unsigned int sysclk; struct snd_pcm_hw_constraint_list *sysclk_constraints; @@ -422,6 +421,7 @@ static int wm8741_resume(struct snd_soc_codec *codec) static int wm8741_probe(struct snd_soc_codec *codec) { struct wm8741_priv *wm8741 = snd_soc_codec_get_drvdata(codec); + u16 *reg_cache = codec->reg_cache; int ret = 0; ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8741->control_type); @@ -437,10 +437,10 @@ static int wm8741_probe(struct snd_soc_codec *codec) } /* Change some default settings - latch VU */ - wm8741->reg_cache[WM8741_DACLLSB_ATTENUATION] |= WM8741_UPDATELL; - wm8741->reg_cache[WM8741_DACLMSB_ATTENUATION] |= WM8741_UPDATELM; - wm8741->reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERL; - wm8741->reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERM; + reg_cache[WM8741_DACLLSB_ATTENUATION] |= WM8741_UPDATELL; + reg_cache[WM8741_DACLMSB_ATTENUATION] |= WM8741_UPDATELM; + reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERL; + reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERM; snd_soc_add_controls(codec, wm8741_snd_controls, ARRAY_SIZE(wm8741_snd_controls)); From f578a188e8b21be623b48bb0eb3a92174c2e5b82 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 28 Dec 2010 21:37:59 +0100 Subject: [PATCH 21/66] ASoC: codecs: wm8904: Fix register cache incoherency The multi-component patch(commit f0fba2ad1) moved the allocation of the register cache from the driver to the ASoC core. Most drivers where adjusted to this, but the wm8904 driver still uses its own register cache for its private functions, while functions from the ASoC core use the generic cache. Thus we end up with two from each other incoherent caches, which can lead to undefined behaviour. This patch fixes the issue by changing the wm8904 driver to use the generic register cache in its private functions. Signed-off-by: Lars-Peter Clausen Cc: Ian Lartey Cc: Dimitris Papastamos Signed-off-by: Mark Brown Cc: stable@kernel.org (for 2.6.37 only) --- sound/soc/codecs/wm8904.c | 37 ++++++++++++++++++------------------- 1 file changed, 18 insertions(+), 19 deletions(-) diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index 9001cc48ba13..1ec12eff0620 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -50,8 +50,6 @@ static const char *wm8904_supply_names[WM8904_NUM_SUPPLIES] = { /* codec private data */ struct wm8904_priv { - u16 reg_cache[WM8904_MAX_REGISTER + 1]; - enum wm8904_type devtype; void *control_data; @@ -2094,7 +2092,7 @@ static int wm8904_digital_mute(struct snd_soc_dai *codec_dai, int mute) static void wm8904_sync_cache(struct snd_soc_codec *codec) { - struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec); + u16 *reg_cache = codec->reg_cache; int i; if (!codec->cache_sync) @@ -2105,14 +2103,14 @@ static void wm8904_sync_cache(struct snd_soc_codec *codec) /* Sync back cached values if they're different from the * hardware default. */ - for (i = 1; i < ARRAY_SIZE(wm8904->reg_cache); i++) { + for (i = 1; i < codec->driver->reg_cache_size; i++) { if (!wm8904_access[i].writable) continue; - if (wm8904->reg_cache[i] == wm8904_reg[i]) + if (reg_cache[i] == wm8904_reg[i]) continue; - snd_soc_write(codec, i, wm8904->reg_cache[i]); + snd_soc_write(codec, i, reg_cache[i]); } codec->cache_sync = 0; @@ -2371,6 +2369,7 @@ static int wm8904_probe(struct snd_soc_codec *codec) { struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec); struct wm8904_pdata *pdata = wm8904->pdata; + u16 *reg_cache = codec->reg_cache; int ret, i; codec->cache_sync = 1; @@ -2437,19 +2436,19 @@ static int wm8904_probe(struct snd_soc_codec *codec) } /* Change some default settings - latch VU and enable ZC */ - wm8904->reg_cache[WM8904_ADC_DIGITAL_VOLUME_LEFT] |= WM8904_ADC_VU; - wm8904->reg_cache[WM8904_ADC_DIGITAL_VOLUME_RIGHT] |= WM8904_ADC_VU; - wm8904->reg_cache[WM8904_DAC_DIGITAL_VOLUME_LEFT] |= WM8904_DAC_VU; - wm8904->reg_cache[WM8904_DAC_DIGITAL_VOLUME_RIGHT] |= WM8904_DAC_VU; - wm8904->reg_cache[WM8904_ANALOGUE_OUT1_LEFT] |= WM8904_HPOUT_VU | + reg_cache[WM8904_ADC_DIGITAL_VOLUME_LEFT] |= WM8904_ADC_VU; + reg_cache[WM8904_ADC_DIGITAL_VOLUME_RIGHT] |= WM8904_ADC_VU; + reg_cache[WM8904_DAC_DIGITAL_VOLUME_LEFT] |= WM8904_DAC_VU; + reg_cache[WM8904_DAC_DIGITAL_VOLUME_RIGHT] |= WM8904_DAC_VU; + reg_cache[WM8904_ANALOGUE_OUT1_LEFT] |= WM8904_HPOUT_VU | WM8904_HPOUTLZC; - wm8904->reg_cache[WM8904_ANALOGUE_OUT1_RIGHT] |= WM8904_HPOUT_VU | + reg_cache[WM8904_ANALOGUE_OUT1_RIGHT] |= WM8904_HPOUT_VU | WM8904_HPOUTRZC; - wm8904->reg_cache[WM8904_ANALOGUE_OUT2_LEFT] |= WM8904_LINEOUT_VU | + reg_cache[WM8904_ANALOGUE_OUT2_LEFT] |= WM8904_LINEOUT_VU | WM8904_LINEOUTLZC; - wm8904->reg_cache[WM8904_ANALOGUE_OUT2_RIGHT] |= WM8904_LINEOUT_VU | + reg_cache[WM8904_ANALOGUE_OUT2_RIGHT] |= WM8904_LINEOUT_VU | WM8904_LINEOUTRZC; - wm8904->reg_cache[WM8904_CLOCK_RATES_0] &= ~WM8904_SR_MODE; + reg_cache[WM8904_CLOCK_RATES_0] &= ~WM8904_SR_MODE; /* Apply configuration from the platform data. */ if (wm8904->pdata) { @@ -2457,23 +2456,23 @@ static int wm8904_probe(struct snd_soc_codec *codec) if (!pdata->gpio_cfg[i]) continue; - wm8904->reg_cache[WM8904_GPIO_CONTROL_1 + i] + reg_cache[WM8904_GPIO_CONTROL_1 + i] = pdata->gpio_cfg[i] & 0xffff; } /* Zero is the default value for these anyway */ for (i = 0; i < WM8904_MIC_REGS; i++) - wm8904->reg_cache[WM8904_MIC_BIAS_CONTROL_0 + i] + reg_cache[WM8904_MIC_BIAS_CONTROL_0 + i] = pdata->mic_cfg[i]; } /* Set Class W by default - this will be managed by the Class * G widget at runtime where bypass paths are available. */ - wm8904->reg_cache[WM8904_CLASS_W_0] |= WM8904_CP_DYN_PWR; + reg_cache[WM8904_CLASS_W_0] |= WM8904_CP_DYN_PWR; /* Use normal bias source */ - wm8904->reg_cache[WM8904_BIAS_CONTROL_0] &= ~WM8904_POBCTRL; + reg_cache[WM8904_BIAS_CONTROL_0] &= ~WM8904_POBCTRL; wm8904_set_bias_level(codec, SND_SOC_BIAS_STANDBY); From 715920d04c787ed718327da53cf51689e51ef3ce Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 28 Dec 2010 21:38:00 +0100 Subject: [PATCH 22/66] ASoC: codecs: wm8955: Fix register cache incoherency The multi-component patch(commit f0fba2ad1) moved the allocation of the register cache from the driver to the ASoC core. Most drivers where adjusted to this, but the wm8955 driver still uses its own register cache for its private functions, while functions from the ASoC core use the generic cache. Thus we end up with two from each other incoherent caches, which can lead to undefined behaviour. This patch fixes the issue by changing the wm8955 driver to use the generic register cache in its private functions. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown Cc: stable@kernel.org (for 2.6.37 only) --- sound/soc/codecs/wm8955.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/sound/soc/codecs/wm8955.c b/sound/soc/codecs/wm8955.c index a2ad91d6078a..2ac35b0be86a 100644 --- a/sound/soc/codecs/wm8955.c +++ b/sound/soc/codecs/wm8955.c @@ -42,8 +42,6 @@ static const char *wm8955_supply_names[WM8955_NUM_SUPPLIES] = { struct wm8955_priv { enum snd_soc_control_type control_type; - u16 reg_cache[WM8955_MAX_REGISTER + 1]; - unsigned int mclk_rate; int deemph; @@ -768,6 +766,7 @@ static int wm8955_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); + u16 *reg_cache = codec->reg_cache; int ret, i; switch (level) { @@ -800,14 +799,14 @@ static int wm8955_set_bias_level(struct snd_soc_codec *codec, /* Sync back cached values if they're * different from the hardware default. */ - for (i = 0; i < ARRAY_SIZE(wm8955->reg_cache); i++) { + for (i = 0; i < codec->driver->reg_cache_size; i++) { if (i == WM8955_RESET) continue; - if (wm8955->reg_cache[i] == wm8955_reg[i]) + if (reg_cache[i] == wm8955_reg[i]) continue; - snd_soc_write(codec, i, wm8955->reg_cache[i]); + snd_soc_write(codec, i, reg_cache[i]); } /* Enable VREF and VMID */ @@ -902,6 +901,7 @@ static int wm8955_probe(struct snd_soc_codec *codec) { struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); struct wm8955_pdata *pdata = dev_get_platdata(codec->dev); + u16 *reg_cache = codec->reg_cache; int ret, i; ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8955->control_type); @@ -934,25 +934,25 @@ static int wm8955_probe(struct snd_soc_codec *codec) } /* Change some default settings - latch VU and enable ZC */ - wm8955->reg_cache[WM8955_LEFT_DAC_VOLUME] |= WM8955_LDVU; - wm8955->reg_cache[WM8955_RIGHT_DAC_VOLUME] |= WM8955_RDVU; - wm8955->reg_cache[WM8955_LOUT1_VOLUME] |= WM8955_LO1VU | WM8955_LO1ZC; - wm8955->reg_cache[WM8955_ROUT1_VOLUME] |= WM8955_RO1VU | WM8955_RO1ZC; - wm8955->reg_cache[WM8955_LOUT2_VOLUME] |= WM8955_LO2VU | WM8955_LO2ZC; - wm8955->reg_cache[WM8955_ROUT2_VOLUME] |= WM8955_RO2VU | WM8955_RO2ZC; - wm8955->reg_cache[WM8955_MONOOUT_VOLUME] |= WM8955_MOZC; + reg_cache[WM8955_LEFT_DAC_VOLUME] |= WM8955_LDVU; + reg_cache[WM8955_RIGHT_DAC_VOLUME] |= WM8955_RDVU; + reg_cache[WM8955_LOUT1_VOLUME] |= WM8955_LO1VU | WM8955_LO1ZC; + reg_cache[WM8955_ROUT1_VOLUME] |= WM8955_RO1VU | WM8955_RO1ZC; + reg_cache[WM8955_LOUT2_VOLUME] |= WM8955_LO2VU | WM8955_LO2ZC; + reg_cache[WM8955_ROUT2_VOLUME] |= WM8955_RO2VU | WM8955_RO2ZC; + reg_cache[WM8955_MONOOUT_VOLUME] |= WM8955_MOZC; /* Also enable adaptive bass boost by default */ - wm8955->reg_cache[WM8955_BASS_CONTROL] |= WM8955_BB; + reg_cache[WM8955_BASS_CONTROL] |= WM8955_BB; /* Set platform data values */ if (pdata) { if (pdata->out2_speaker) - wm8955->reg_cache[WM8955_ADDITIONAL_CONTROL_2] + reg_cache[WM8955_ADDITIONAL_CONTROL_2] |= WM8955_ROUT2INV; if (pdata->monoin_diff) - wm8955->reg_cache[WM8955_MONO_OUT_MIX_1] + reg_cache[WM8955_MONO_OUT_MIX_1] |= WM8955_DMEN; } From 7f87e30ef29951f4509a7f86acf00e1ba48af54a Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 28 Dec 2010 21:38:01 +0100 Subject: [PATCH 23/66] ASoC: codecs: wm8962: Fix register cache incoherency The multi-component patch(commit f0fba2ad1) moved the allocation of the register cache from the driver to the ASoC core. Most drivers where adjusted to this, but the wm8962 driver still uses its own register cache for its private functions, while functions from the ASoC core use the generic cache. Thus we end up with two from each other incoherent caches, which can lead to undefined behaviour. This patch fixes the issue by changing the wm8962 driver to use the generic register cache in its private functions. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown Cc: stable@kernel.org (for 2.6.37 only) --- sound/soc/codecs/wm8962.c | 45 +++++++++++++++++---------------------- 1 file changed, 20 insertions(+), 25 deletions(-) diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 1304ca91a11c..7c421cc837bd 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -52,8 +52,6 @@ static const char *wm8962_supply_names[WM8962_NUM_SUPPLIES] = { struct wm8962_priv { struct snd_soc_codec *codec; - u16 reg_cache[WM8962_MAX_REGISTER + 1]; - int sysclk; int sysclk_rate; @@ -1991,8 +1989,7 @@ static int wm8962_put_hp_sw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); - u16 *reg_cache = wm8962->reg_cache; + u16 *reg_cache = codec->reg_cache; int ret; /* Apply the update (if any) */ @@ -2020,8 +2017,7 @@ static int wm8962_put_spk_sw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); - u16 *reg_cache = wm8962->reg_cache; + u16 *reg_cache = codec->reg_cache; int ret; /* Apply the update (if any) */ @@ -2329,8 +2325,7 @@ static int out_pga_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_codec *codec = w->codec; - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); - u16 *reg_cache = wm8962->reg_cache; + u16 *reg_cache = codec->reg_cache; int reg; switch (w->shift) { @@ -2719,7 +2714,7 @@ static int wm8962_add_widgets(struct snd_soc_codec *codec) static void wm8962_sync_cache(struct snd_soc_codec *codec) { - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + u16 *reg_cache = codec->reg_cache; int i; if (!codec->cache_sync) @@ -2732,13 +2727,13 @@ static void wm8962_sync_cache(struct snd_soc_codec *codec) /* Sync back cached values if they're different from the * hardware default. */ - for (i = 1; i < ARRAY_SIZE(wm8962->reg_cache); i++) { + for (i = 1; i < codec->driver->reg_cache_size; i++) { if (i == WM8962_SOFTWARE_RESET) continue; - if (wm8962->reg_cache[i] == wm8962_reg[i]) + if (reg_cache[i] == wm8962_reg[i]) continue; - snd_soc_write(codec, i, wm8962->reg_cache[i]); + snd_soc_write(codec, i, reg_cache[i]); } codec->cache_sync = 0; @@ -3406,12 +3401,11 @@ EXPORT_SYMBOL_GPL(wm8962_mic_detect); #ifdef CONFIG_PM static int wm8962_resume(struct snd_soc_codec *codec) { - struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); u16 *reg_cache = codec->reg_cache; int i; /* Restore the registers */ - for (i = 1; i < ARRAY_SIZE(wm8962->reg_cache); i++) { + for (i = 1; i < codec->driver->reg_cache_size; i++) { switch (i) { case WM8962_SOFTWARE_RESET: continue; @@ -3705,6 +3699,7 @@ static int wm8962_probe(struct snd_soc_codec *codec) struct wm8962_pdata *pdata = dev_get_platdata(codec->dev); struct i2c_client *i2c = container_of(codec->dev, struct i2c_client, dev); + u16 *reg_cache = codec->reg_cache; int i, trigger, irq_pol; wm8962->codec = codec; @@ -3804,7 +3799,7 @@ static int wm8962_probe(struct snd_soc_codec *codec) /* Put the speakers into mono mode? */ if (pdata->spk_mono) - wm8962->reg_cache[WM8962_CLASS_D_CONTROL_2] + reg_cache[WM8962_CLASS_D_CONTROL_2] |= WM8962_SPK_MONO; /* Micbias setup, detection enable and detection @@ -3819,16 +3814,16 @@ static int wm8962_probe(struct snd_soc_codec *codec) } /* Latch volume update bits */ - wm8962->reg_cache[WM8962_LEFT_INPUT_VOLUME] |= WM8962_IN_VU; - wm8962->reg_cache[WM8962_RIGHT_INPUT_VOLUME] |= WM8962_IN_VU; - wm8962->reg_cache[WM8962_LEFT_ADC_VOLUME] |= WM8962_ADC_VU; - wm8962->reg_cache[WM8962_RIGHT_ADC_VOLUME] |= WM8962_ADC_VU; - wm8962->reg_cache[WM8962_LEFT_DAC_VOLUME] |= WM8962_DAC_VU; - wm8962->reg_cache[WM8962_RIGHT_DAC_VOLUME] |= WM8962_DAC_VU; - wm8962->reg_cache[WM8962_SPKOUTL_VOLUME] |= WM8962_SPKOUT_VU; - wm8962->reg_cache[WM8962_SPKOUTR_VOLUME] |= WM8962_SPKOUT_VU; - wm8962->reg_cache[WM8962_HPOUTL_VOLUME] |= WM8962_HPOUT_VU; - wm8962->reg_cache[WM8962_HPOUTR_VOLUME] |= WM8962_HPOUT_VU; + reg_cache[WM8962_LEFT_INPUT_VOLUME] |= WM8962_IN_VU; + reg_cache[WM8962_RIGHT_INPUT_VOLUME] |= WM8962_IN_VU; + reg_cache[WM8962_LEFT_ADC_VOLUME] |= WM8962_ADC_VU; + reg_cache[WM8962_RIGHT_ADC_VOLUME] |= WM8962_ADC_VU; + reg_cache[WM8962_LEFT_DAC_VOLUME] |= WM8962_DAC_VU; + reg_cache[WM8962_RIGHT_DAC_VOLUME] |= WM8962_DAC_VU; + reg_cache[WM8962_SPKOUTL_VOLUME] |= WM8962_SPKOUT_VU; + reg_cache[WM8962_SPKOUTR_VOLUME] |= WM8962_SPKOUT_VU; + reg_cache[WM8962_HPOUTL_VOLUME] |= WM8962_HPOUT_VU; + reg_cache[WM8962_HPOUTR_VOLUME] |= WM8962_HPOUT_VU; wm8962_add_widgets(codec); From da280f51d0b341282b4181eb3235f774b0446584 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 28 Dec 2010 21:38:02 +0100 Subject: [PATCH 24/66] ASoC: codecs: wm9090: Fix register cache incoherency The multi-component patch(commit f0fba2ad1) moved the allocation of the register cache from the driver to the ASoC core. Most drivers where adjusted to this, but the wm9090 driver still uses its own register cache for its private functions, while functions from the ASoC core use the generic cache. Thus we end up with two from each other incoherent caches, which can lead to undefined behaviour. This patch fixes the issue by changing the wm9090 driver to use the generic register cache in its private functions. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown Cc: stable@kernel.org (for 2.6.37 only) --- sound/soc/codecs/wm9090.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/sound/soc/codecs/wm9090.c b/sound/soc/codecs/wm9090.c index 99c046ba46bb..6e5f64f627cb 100644 --- a/sound/soc/codecs/wm9090.c +++ b/sound/soc/codecs/wm9090.c @@ -141,7 +141,6 @@ static const u16 wm9090_reg_defaults[] = { /* This struct is used to save the context */ struct wm9090_priv { struct mutex mutex; - u16 reg_cache[WM9090_MAX_REGISTER + 1]; struct wm9090_platform_data pdata; void *control_data; }; @@ -552,6 +551,7 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec, static int wm9090_probe(struct snd_soc_codec *codec) { struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec); + u16 *reg_cache = codec->reg_cache; int ret; codec->control_data = wm9090->control_data; @@ -576,22 +576,22 @@ static int wm9090_probe(struct snd_soc_codec *codec) /* Configure some defaults; they will be written out when we * bring the bias up. */ - wm9090->reg_cache[WM9090_IN1_LINE_INPUT_A_VOLUME] |= WM9090_IN1_VU + reg_cache[WM9090_IN1_LINE_INPUT_A_VOLUME] |= WM9090_IN1_VU | WM9090_IN1A_ZC; - wm9090->reg_cache[WM9090_IN1_LINE_INPUT_B_VOLUME] |= WM9090_IN1_VU + reg_cache[WM9090_IN1_LINE_INPUT_B_VOLUME] |= WM9090_IN1_VU | WM9090_IN1B_ZC; - wm9090->reg_cache[WM9090_IN2_LINE_INPUT_A_VOLUME] |= WM9090_IN2_VU + reg_cache[WM9090_IN2_LINE_INPUT_A_VOLUME] |= WM9090_IN2_VU | WM9090_IN2A_ZC; - wm9090->reg_cache[WM9090_IN2_LINE_INPUT_B_VOLUME] |= WM9090_IN2_VU + reg_cache[WM9090_IN2_LINE_INPUT_B_VOLUME] |= WM9090_IN2_VU | WM9090_IN2B_ZC; - wm9090->reg_cache[WM9090_SPEAKER_VOLUME_LEFT] |= + reg_cache[WM9090_SPEAKER_VOLUME_LEFT] |= WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC; - wm9090->reg_cache[WM9090_LEFT_OUTPUT_VOLUME] |= + reg_cache[WM9090_LEFT_OUTPUT_VOLUME] |= WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC; - wm9090->reg_cache[WM9090_RIGHT_OUTPUT_VOLUME] |= + reg_cache[WM9090_RIGHT_OUTPUT_VOLUME] |= WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC; - wm9090->reg_cache[WM9090_CLOCKING_1] |= WM9090_TOCLK_ENA; + reg_cache[WM9090_CLOCKING_1] |= WM9090_TOCLK_ENA; wm9090_set_bias_level(codec, SND_SOC_BIAS_STANDBY); From 776065e36de1d5eb9e33ff908352fef4050ab38d Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 28 Dec 2010 21:38:03 +0100 Subject: [PATCH 25/66] ASoC: codecs: wm8753: Fix register cache incoherency The multi-component patch(commit f0fba2ad1) moved the allocation of the register cache from the driver to the ASoC core. Most drivers where adjusted to this, but the wm8753 driver still uses its own register cache for its private functions, while functions from the ASoC core use the generic cache. Furthermore the generic cache uses zero-based numbering while the wm8753 cache uses one-based numbering. Thus we end up with two from each other incoherent caches, which leads to undefined behaviour and crashes. This patch fixes the issue by changing the wm8753 driver to use the generic register cache in its private functions. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- sound/soc/codecs/wm8753.c | 226 ++++++++++++++------------------------ 1 file changed, 83 insertions(+), 143 deletions(-) diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index 8f679a13f2bc..87caae59e939 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -65,22 +65,22 @@ static void wm8753_set_dai_mode(struct snd_soc_codec *codec, * are using 2 wire for device control, so we cache them instead. */ static const u16 wm8753_reg[] = { - 0x0008, 0x0000, 0x000a, 0x000a, - 0x0033, 0x0000, 0x0007, 0x00ff, - 0x00ff, 0x000f, 0x000f, 0x007b, - 0x0000, 0x0032, 0x0000, 0x00c3, - 0x00c3, 0x00c0, 0x0000, 0x0000, + 0x0000, 0x0008, 0x0000, 0x000a, + 0x000a, 0x0033, 0x0000, 0x0007, + 0x00ff, 0x00ff, 0x000f, 0x000f, + 0x007b, 0x0000, 0x0032, 0x0000, + 0x00c3, 0x00c3, 0x00c0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0055, - 0x0005, 0x0050, 0x0055, 0x0050, - 0x0055, 0x0050, 0x0055, 0x0079, + 0x0000, 0x0000, 0x0000, 0x0000, + 0x0055, 0x0005, 0x0050, 0x0055, + 0x0050, 0x0055, 0x0050, 0x0055, 0x0079, 0x0079, 0x0079, 0x0079, - 0x0000, 0x0000, 0x0000, 0x0000, - 0x0097, 0x0097, 0x0000, 0x0004, - 0x0000, 0x0083, 0x0024, 0x01ba, - 0x0000, 0x0083, 0x0024, 0x01ba, - 0x0000, 0x0000, 0x0000 + 0x0079, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0097, 0x0097, 0x0000, + 0x0004, 0x0000, 0x0083, 0x0024, + 0x01ba, 0x0000, 0x0083, 0x0024, + 0x01ba, 0x0000, 0x0000, 0x0000 }; /* codec private data */ @@ -88,57 +88,10 @@ struct wm8753_priv { enum snd_soc_control_type control_type; unsigned int sysclk; unsigned int pcmclk; - u16 reg_cache[ARRAY_SIZE(wm8753_reg)]; int dai_func; }; -/* - * read wm8753 register cache - */ -static inline unsigned int wm8753_read_reg_cache(struct snd_soc_codec *codec, - unsigned int reg) -{ - u16 *cache = codec->reg_cache; - if (reg < 1 || reg >= (ARRAY_SIZE(wm8753_reg) + 1)) - return -1; - return cache[reg - 1]; -} - -/* - * write wm8753 register cache - */ -static inline void wm8753_write_reg_cache(struct snd_soc_codec *codec, - unsigned int reg, unsigned int value) -{ - u16 *cache = codec->reg_cache; - if (reg < 1 || reg >= (ARRAY_SIZE(wm8753_reg) + 1)) - return; - cache[reg - 1] = value; -} - -/* - * write to the WM8753 register space - */ -static int wm8753_write(struct snd_soc_codec *codec, unsigned int reg, - unsigned int value) -{ - u8 data[2]; - - /* data is - * D15..D9 WM8753 register offset - * D8...D0 register data - */ - data[0] = (reg << 1) | ((value >> 8) & 0x0001); - data[1] = value & 0x00ff; - - wm8753_write_reg_cache(codec, reg, value); - if (codec->hw_write(codec->control_data, data, 2) == 2) - return 0; - else - return -EIO; -} - -#define wm8753_reset(c) wm8753_write(c, WM8753_RESET, 0) +#define wm8753_reset(c) snd_soc_write(c, WM8753_RESET, 0) /* * WM8753 Controls @@ -218,7 +171,7 @@ static int wm8753_get_dai(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); - int mode = wm8753_read_reg_cache(codec, WM8753_IOCTL); + int mode = snd_soc_read(codec, WM8753_IOCTL); ucontrol->value.integer.value[0] = (mode & 0xc) >> 2; return 0; @@ -228,7 +181,7 @@ static int wm8753_set_dai(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); - int mode = wm8753_read_reg_cache(codec, WM8753_IOCTL); + int mode = snd_soc_read(codec, WM8753_IOCTL); struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec); if (((mode & 0xc) >> 2) == ucontrol->value.integer.value[0]) @@ -738,17 +691,17 @@ static int wm8753_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, if (pll_id == WM8753_PLL1) { offset = 0; enable = 0x10; - reg = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xffef; + reg = snd_soc_read(codec, WM8753_CLOCK) & 0xffef; } else { offset = 4; enable = 0x8; - reg = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xfff7; + reg = snd_soc_read(codec, WM8753_CLOCK) & 0xfff7; } if (!freq_in || !freq_out) { /* disable PLL */ - wm8753_write(codec, WM8753_PLL1CTL1 + offset, 0x0026); - wm8753_write(codec, WM8753_CLOCK, reg); + snd_soc_write(codec, WM8753_PLL1CTL1 + offset, 0x0026); + snd_soc_write(codec, WM8753_CLOCK, reg); return 0; } else { u16 value = 0; @@ -759,20 +712,20 @@ static int wm8753_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, /* set up N and K PLL divisor ratios */ /* bits 8:5 = PLL_N, bits 3:0 = PLL_K[21:18] */ value = (pll_div.n << 5) + ((pll_div.k & 0x3c0000) >> 18); - wm8753_write(codec, WM8753_PLL1CTL2 + offset, value); + snd_soc_write(codec, WM8753_PLL1CTL2 + offset, value); /* bits 8:0 = PLL_K[17:9] */ value = (pll_div.k & 0x03fe00) >> 9; - wm8753_write(codec, WM8753_PLL1CTL3 + offset, value); + snd_soc_write(codec, WM8753_PLL1CTL3 + offset, value); /* bits 8:0 = PLL_K[8:0] */ value = pll_div.k & 0x0001ff; - wm8753_write(codec, WM8753_PLL1CTL4 + offset, value); + snd_soc_write(codec, WM8753_PLL1CTL4 + offset, value); /* set PLL as input and enable */ - wm8753_write(codec, WM8753_PLL1CTL1 + offset, 0x0027 | + snd_soc_write(codec, WM8753_PLL1CTL1 + offset, 0x0027 | (pll_div.div2 << 3)); - wm8753_write(codec, WM8753_CLOCK, reg | enable); + snd_soc_write(codec, WM8753_CLOCK, reg | enable); } return 0; } @@ -879,7 +832,7 @@ static int wm8753_vdac_adc_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) { struct snd_soc_codec *codec = codec_dai->codec; - u16 voice = wm8753_read_reg_cache(codec, WM8753_PCM) & 0x01ec; + u16 voice = snd_soc_read(codec, WM8753_PCM) & 0x01ec; /* interface format */ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { @@ -901,7 +854,7 @@ static int wm8753_vdac_adc_set_dai_fmt(struct snd_soc_dai *codec_dai, return -EINVAL; } - wm8753_write(codec, WM8753_PCM, voice); + snd_soc_write(codec, WM8753_PCM, voice); return 0; } @@ -922,8 +875,8 @@ static int wm8753_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_codec *codec = rtd->codec; struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec); - u16 voice = wm8753_read_reg_cache(codec, WM8753_PCM) & 0x01f3; - u16 srate = wm8753_read_reg_cache(codec, WM8753_SRATE1) & 0x017f; + u16 voice = snd_soc_read(codec, WM8753_PCM) & 0x01f3; + u16 srate = snd_soc_read(codec, WM8753_SRATE1) & 0x017f; /* bit size */ switch (params_format(params)) { @@ -943,9 +896,9 @@ static int wm8753_pcm_hw_params(struct snd_pcm_substream *substream, /* sample rate */ if (params_rate(params) * 384 == wm8753->pcmclk) srate |= 0x80; - wm8753_write(codec, WM8753_SRATE1, srate); + snd_soc_write(codec, WM8753_SRATE1, srate); - wm8753_write(codec, WM8753_PCM, voice); + snd_soc_write(codec, WM8753_PCM, voice); return 0; } @@ -958,8 +911,8 @@ static int wm8753_pcm_set_dai_fmt(struct snd_soc_dai *codec_dai, struct snd_soc_codec *codec = codec_dai->codec; u16 voice, ioctl; - voice = wm8753_read_reg_cache(codec, WM8753_PCM) & 0x011f; - ioctl = wm8753_read_reg_cache(codec, WM8753_IOCTL) & 0x015d; + voice = snd_soc_read(codec, WM8753_PCM) & 0x011f; + ioctl = snd_soc_read(codec, WM8753_IOCTL) & 0x015d; /* set master/slave audio interface */ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { @@ -1013,8 +966,8 @@ static int wm8753_pcm_set_dai_fmt(struct snd_soc_dai *codec_dai, return -EINVAL; } - wm8753_write(codec, WM8753_PCM, voice); - wm8753_write(codec, WM8753_IOCTL, ioctl); + snd_soc_write(codec, WM8753_PCM, voice); + snd_soc_write(codec, WM8753_IOCTL, ioctl); return 0; } @@ -1026,16 +979,16 @@ static int wm8753_set_dai_clkdiv(struct snd_soc_dai *codec_dai, switch (div_id) { case WM8753_PCMDIV: - reg = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0x003f; - wm8753_write(codec, WM8753_CLOCK, reg | div); + reg = snd_soc_read(codec, WM8753_CLOCK) & 0x003f; + snd_soc_write(codec, WM8753_CLOCK, reg | div); break; case WM8753_BCLKDIV: - reg = wm8753_read_reg_cache(codec, WM8753_SRATE2) & 0x01c7; - wm8753_write(codec, WM8753_SRATE2, reg | div); + reg = snd_soc_read(codec, WM8753_SRATE2) & 0x01c7; + snd_soc_write(codec, WM8753_SRATE2, reg | div); break; case WM8753_VXCLKDIV: - reg = wm8753_read_reg_cache(codec, WM8753_SRATE2) & 0x003f; - wm8753_write(codec, WM8753_SRATE2, reg | div); + reg = snd_soc_read(codec, WM8753_SRATE2) & 0x003f; + snd_soc_write(codec, WM8753_SRATE2, reg | div); break; default: return -EINVAL; @@ -1050,7 +1003,7 @@ static int wm8753_hdac_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) { struct snd_soc_codec *codec = codec_dai->codec; - u16 hifi = wm8753_read_reg_cache(codec, WM8753_HIFI) & 0x01e0; + u16 hifi = snd_soc_read(codec, WM8753_HIFI) & 0x01e0; /* interface format */ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { @@ -1072,7 +1025,7 @@ static int wm8753_hdac_set_dai_fmt(struct snd_soc_dai *codec_dai, return -EINVAL; } - wm8753_write(codec, WM8753_HIFI, hifi); + snd_soc_write(codec, WM8753_HIFI, hifi); return 0; } @@ -1085,8 +1038,8 @@ static int wm8753_i2s_set_dai_fmt(struct snd_soc_dai *codec_dai, struct snd_soc_codec *codec = codec_dai->codec; u16 ioctl, hifi; - hifi = wm8753_read_reg_cache(codec, WM8753_HIFI) & 0x011f; - ioctl = wm8753_read_reg_cache(codec, WM8753_IOCTL) & 0x00ae; + hifi = snd_soc_read(codec, WM8753_HIFI) & 0x011f; + ioctl = snd_soc_read(codec, WM8753_IOCTL) & 0x00ae; /* set master/slave audio interface */ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { @@ -1140,8 +1093,8 @@ static int wm8753_i2s_set_dai_fmt(struct snd_soc_dai *codec_dai, return -EINVAL; } - wm8753_write(codec, WM8753_HIFI, hifi); - wm8753_write(codec, WM8753_IOCTL, ioctl); + snd_soc_write(codec, WM8753_HIFI, hifi); + snd_soc_write(codec, WM8753_IOCTL, ioctl); return 0; } @@ -1162,8 +1115,8 @@ static int wm8753_i2s_hw_params(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_codec *codec = rtd->codec; struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec); - u16 srate = wm8753_read_reg_cache(codec, WM8753_SRATE1) & 0x01c0; - u16 hifi = wm8753_read_reg_cache(codec, WM8753_HIFI) & 0x01f3; + u16 srate = snd_soc_read(codec, WM8753_SRATE1) & 0x01c0; + u16 hifi = snd_soc_read(codec, WM8753_HIFI) & 0x01f3; int coeff; /* is digital filter coefficient valid ? */ @@ -1172,7 +1125,7 @@ static int wm8753_i2s_hw_params(struct snd_pcm_substream *substream, printk(KERN_ERR "wm8753 invalid MCLK or rate\n"); return coeff; } - wm8753_write(codec, WM8753_SRATE1, srate | (coeff_div[coeff].sr << 1) | + snd_soc_write(codec, WM8753_SRATE1, srate | (coeff_div[coeff].sr << 1) | coeff_div[coeff].usb); /* bit size */ @@ -1190,7 +1143,7 @@ static int wm8753_i2s_hw_params(struct snd_pcm_substream *substream, break; } - wm8753_write(codec, WM8753_HIFI, hifi); + snd_soc_write(codec, WM8753_HIFI, hifi); return 0; } @@ -1201,8 +1154,8 @@ static int wm8753_mode1v_set_dai_fmt(struct snd_soc_dai *codec_dai, u16 clock; /* set clk source as pcmclk */ - clock = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xfffb; - wm8753_write(codec, WM8753_CLOCK, clock); + clock = snd_soc_read(codec, WM8753_CLOCK) & 0xfffb; + snd_soc_write(codec, WM8753_CLOCK, clock); if (wm8753_vdac_adc_set_dai_fmt(codec_dai, fmt) < 0) return -EINVAL; @@ -1224,8 +1177,8 @@ static int wm8753_mode2_set_dai_fmt(struct snd_soc_dai *codec_dai, u16 clock; /* set clk source as pcmclk */ - clock = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xfffb; - wm8753_write(codec, WM8753_CLOCK, clock); + clock = snd_soc_read(codec, WM8753_CLOCK) & 0xfffb; + snd_soc_write(codec, WM8753_CLOCK, clock); if (wm8753_vdac_adc_set_dai_fmt(codec_dai, fmt) < 0) return -EINVAL; @@ -1239,8 +1192,8 @@ static int wm8753_mode3_4_set_dai_fmt(struct snd_soc_dai *codec_dai, u16 clock; /* set clk source as mclk */ - clock = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xfffb; - wm8753_write(codec, WM8753_CLOCK, clock | 0x4); + clock = snd_soc_read(codec, WM8753_CLOCK) & 0xfffb; + snd_soc_write(codec, WM8753_CLOCK, clock | 0x4); if (wm8753_hdac_set_dai_fmt(codec_dai, fmt) < 0) return -EINVAL; @@ -1252,19 +1205,19 @@ static int wm8753_mode3_4_set_dai_fmt(struct snd_soc_dai *codec_dai, static int wm8753_mute(struct snd_soc_dai *dai, int mute) { struct snd_soc_codec *codec = dai->codec; - u16 mute_reg = wm8753_read_reg_cache(codec, WM8753_DAC) & 0xfff7; + u16 mute_reg = snd_soc_read(codec, WM8753_DAC) & 0xfff7; struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec); /* the digital mute covers the HiFi and Voice DAC's on the WM8753. * make sure we check if they are not both active when we mute */ if (mute && wm8753->dai_func == 1) { if (!codec->active) - wm8753_write(codec, WM8753_DAC, mute_reg | 0x8); + snd_soc_write(codec, WM8753_DAC, mute_reg | 0x8); } else { if (mute) - wm8753_write(codec, WM8753_DAC, mute_reg | 0x8); + snd_soc_write(codec, WM8753_DAC, mute_reg | 0x8); else - wm8753_write(codec, WM8753_DAC, mute_reg); + snd_soc_write(codec, WM8753_DAC, mute_reg); } return 0; @@ -1273,23 +1226,23 @@ static int wm8753_mute(struct snd_soc_dai *dai, int mute) static int wm8753_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { - u16 pwr_reg = wm8753_read_reg_cache(codec, WM8753_PWR1) & 0xfe3e; + u16 pwr_reg = snd_soc_read(codec, WM8753_PWR1) & 0xfe3e; switch (level) { case SND_SOC_BIAS_ON: /* set vmid to 50k and unmute dac */ - wm8753_write(codec, WM8753_PWR1, pwr_reg | 0x00c0); + snd_soc_write(codec, WM8753_PWR1, pwr_reg | 0x00c0); break; case SND_SOC_BIAS_PREPARE: /* set vmid to 5k for quick power up */ - wm8753_write(codec, WM8753_PWR1, pwr_reg | 0x01c1); + snd_soc_write(codec, WM8753_PWR1, pwr_reg | 0x01c1); break; case SND_SOC_BIAS_STANDBY: /* mute dac and set vmid to 500k, enable VREF */ - wm8753_write(codec, WM8753_PWR1, pwr_reg | 0x0141); + snd_soc_write(codec, WM8753_PWR1, pwr_reg | 0x0141); break; case SND_SOC_BIAS_OFF: - wm8753_write(codec, WM8753_PWR1, 0x0001); + snd_soc_write(codec, WM8753_PWR1, 0x0001); break; } codec->bias_level = level; @@ -1477,7 +1430,7 @@ static void wm8753_set_dai_mode(struct snd_soc_codec *codec, else dai->driver = &wm8753_all_dai[(wm8753->dai_func << 1) + 1]; } - wm8753_write(codec, WM8753_IOCTL, wm8753->dai_func); + snd_soc_write(codec, WM8753_IOCTL, wm8753->dai_func); } static void wm8753_work(struct work_struct *work) @@ -1495,22 +1448,19 @@ static int wm8753_suspend(struct snd_soc_codec *codec, pm_message_t state) static int wm8753_resume(struct snd_soc_codec *codec) { + u16 *reg_cache = codec->reg_cache; int i; - u8 data[2]; - u16 *cache = codec->reg_cache; /* Sync reg_cache with the hardware */ - for (i = 0; i < ARRAY_SIZE(wm8753_reg); i++) { - if (i + 1 == WM8753_RESET) + for (i = 1; i < ARRAY_SIZE(wm8753_reg); i++) { + if (i == WM8753_RESET) continue; /* No point in writing hardware default values back */ - if (cache[i] == wm8753_reg[i]) + if (reg_cache[i] == wm8753_reg[i]) continue; - data[0] = ((i + 1) << 1) | ((cache[i] >> 8) & 0x0001); - data[1] = cache[i] & 0x00ff; - codec->hw_write(codec->control_data, data, 2); + snd_soc_write(codec, i, reg_cache[i]); } wm8753_set_bias_level(codec, SND_SOC_BIAS_STANDBY); @@ -1548,7 +1498,7 @@ static int run_delayed_work(struct delayed_work *dwork) static int wm8753_probe(struct snd_soc_codec *codec) { struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec); - int ret = 0, reg; + int ret; INIT_DELAYED_WORK(&codec->delayed_work, wm8753_work); @@ -1573,26 +1523,16 @@ static int wm8753_probe(struct snd_soc_codec *codec) msecs_to_jiffies(caps_charge)); /* set the update bits */ - reg = wm8753_read_reg_cache(codec, WM8753_LDAC); - wm8753_write(codec, WM8753_LDAC, reg | 0x0100); - reg = wm8753_read_reg_cache(codec, WM8753_RDAC); - wm8753_write(codec, WM8753_RDAC, reg | 0x0100); - reg = wm8753_read_reg_cache(codec, WM8753_LADC); - wm8753_write(codec, WM8753_LADC, reg | 0x0100); - reg = wm8753_read_reg_cache(codec, WM8753_RADC); - wm8753_write(codec, WM8753_RADC, reg | 0x0100); - reg = wm8753_read_reg_cache(codec, WM8753_LOUT1V); - wm8753_write(codec, WM8753_LOUT1V, reg | 0x0100); - reg = wm8753_read_reg_cache(codec, WM8753_ROUT1V); - wm8753_write(codec, WM8753_ROUT1V, reg | 0x0100); - reg = wm8753_read_reg_cache(codec, WM8753_LOUT2V); - wm8753_write(codec, WM8753_LOUT2V, reg | 0x0100); - reg = wm8753_read_reg_cache(codec, WM8753_ROUT2V); - wm8753_write(codec, WM8753_ROUT2V, reg | 0x0100); - reg = wm8753_read_reg_cache(codec, WM8753_LINVOL); - wm8753_write(codec, WM8753_LINVOL, reg | 0x0100); - reg = wm8753_read_reg_cache(codec, WM8753_RINVOL); - wm8753_write(codec, WM8753_RINVOL, reg | 0x0100); + snd_soc_update_bits(codec, WM8753_LDAC, 0x0100, 0x0100); + snd_soc_update_bits(codec, WM8753_RDAC, 0x0100, 0x0100); + snd_soc_update_bits(codec, WM8753_LDAC, 0x0100, 0x0100); + snd_soc_update_bits(codec, WM8753_RDAC, 0x0100, 0x0100); + snd_soc_update_bits(codec, WM8753_LOUT1V, 0x0100, 0x0100); + snd_soc_update_bits(codec, WM8753_ROUT1V, 0x0100, 0x0100); + snd_soc_update_bits(codec, WM8753_LOUT2V, 0x0100, 0x0100); + snd_soc_update_bits(codec, WM8753_ROUT2V, 0x0100, 0x0100); + snd_soc_update_bits(codec, WM8753_LINVOL, 0x0100, 0x0100); + snd_soc_update_bits(codec, WM8753_RINVOL, 0x0100, 0x0100); snd_soc_add_controls(codec, wm8753_snd_controls, ARRAY_SIZE(wm8753_snd_controls)); From 649497d1a3676020802ebba04a3d9bb31253adb5 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 28 Dec 2010 12:09:07 +0200 Subject: [PATCH 26/66] KVM: MMU: Fix incorrect direct gfn for unpaged mode shadow We use the physical address instead of the base gfn for the four PAE page directories we use in unpaged mode. When the guest accesses an address above 1GB that is backed by a large host page, a BUG_ON() in kvm_mmu_set_gfn() triggers. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=21962 Reported-and-tested-by: Nicolas Prochazka KVM-Stable-Tag. Signed-off-by: Avi Kivity --- arch/x86/kvm/mmu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index fb8b376bf28c..fbb04aee8301 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -2394,7 +2394,8 @@ static int mmu_alloc_direct_roots(struct kvm_vcpu *vcpu) ASSERT(!VALID_PAGE(root)); spin_lock(&vcpu->kvm->mmu_lock); kvm_mmu_free_some_pages(vcpu); - sp = kvm_mmu_get_page(vcpu, i << 30, i << 30, + sp = kvm_mmu_get_page(vcpu, i << (30 - PAGE_SHIFT), + i << 30, PT32_ROOT_LEVEL, 1, ACC_ALL, NULL); root = __pa(sp->spt); From 4ef9e11d6867f88951e30db910fa015300e31871 Mon Sep 17 00:00:00 2001 From: Hillf Danton Date: Wed, 29 Dec 2010 21:55:28 +0800 Subject: [PATCH 27/66] fix freeing user_struct in user cache When racing on adding into user cache, the new allocated from mm slab is freed without putting user namespace. Since the user namespace is already operated by getting, putting has to be issued. Signed-off-by: Hillf Danton Acked-by: Serge Hallyn Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- kernel/user.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/user.c b/kernel/user.c index 2c7d8d5914b1..5c598ca781df 100644 --- a/kernel/user.c +++ b/kernel/user.c @@ -158,6 +158,7 @@ struct user_struct *alloc_uid(struct user_namespace *ns, uid_t uid) spin_lock_irq(&uidhash_lock); up = uid_hash_find(uid, hashent); if (up) { + put_user_ns(ns); key_put(new->uid_keyring); key_put(new->session_keyring); kmem_cache_free(uid_cachep, new); From 42ce7fd6319bed8ecb26d656c476365da46b29e9 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Wed, 29 Dec 2010 11:52:53 +0100 Subject: [PATCH 28/66] spi/omap2_mcspi.c: Force CS to be in inactive state after off-mode transition When SPI wake up from OFF mode, CS is in the wrong state: force it to the inactive state. During the system life, I monitored the CS behavior using a oscilloscope. I also activated debug in omap2_mcspi, so I saw when driver disable the clocks and restore context when device is not used.Each time the CS was in the correct state. It was only when system was put suspend to ram with off-mode activated that on resume the CS was in wrong state( ie activated). Changelog: * Change from v1 to v2: - Rebase on linus/master (after 2.6.37-rc1) - Do some clean-up and fix indentation on both patches - Add more explanations for patch 2 * Change from v2 to v3: - Use directly resume function of spi_master instead of using function - from spi_device as Grant Likely pointed it out. - Force this transition explicitly for each CS used by a device. * Change from v3 to v4: - Patch clean-up according to Kevin Hilman and checkpatch. - Now force CS to be in inactive state only if it was inactive when it was suspended. * Change from v4 to v5: - Rebase on linus/master (after 2.6.37-rc3) - Collapse some lines as pointed by Grant Likely - Fix a spelling * Change from v5 to v6: - Rebase on linus/master (after 2.6.37-rc7) - Use CONFIG_SUSPEND instead of CONFIG_PM - Didn't use legacy PM methods anymore. Instead, add a struct dev_pm_ops and add the resume method there. - Fix multi-line comment style * Change from v6 to v7: - Rebase on linus/master (after 2.6.37-rc8) - Drop an extra line Signed-off-by: Gregory CLEMENT Acked-by: David Brownell Reviewed-by: Kevin Hilman Signed-off-by: Grant Likely --- drivers/spi/omap2_mcspi.c | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index 2a651e61bfbf..951a160fc27f 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c @@ -1305,10 +1305,49 @@ static int __exit omap2_mcspi_remove(struct platform_device *pdev) /* work with hotplug and coldplug */ MODULE_ALIAS("platform:omap2_mcspi"); +#ifdef CONFIG_SUSPEND +/* + * When SPI wake up from off-mode, CS is in activate state. If it was in + * unactive state when driver was suspend, then force it to unactive state at + * wake up. + */ +static int omap2_mcspi_resume(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct omap2_mcspi *mcspi = spi_master_get_devdata(master); + struct omap2_mcspi_cs *cs; + + omap2_mcspi_enable_clocks(mcspi); + list_for_each_entry(cs, &omap2_mcspi_ctx[master->bus_num - 1].cs, + node) { + if ((cs->chconf0 & OMAP2_MCSPI_CHCONF_FORCE) == 0) { + + /* + * We need to toggle CS state for OMAP take this + * change in account. + */ + MOD_REG_BIT(cs->chconf0, OMAP2_MCSPI_CHCONF_FORCE, 1); + __raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0); + MOD_REG_BIT(cs->chconf0, OMAP2_MCSPI_CHCONF_FORCE, 0); + __raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0); + } + } + omap2_mcspi_disable_clocks(mcspi); + return 0; +} +#else +#define omap2_mcspi_resume NULL +#endif + +static const struct dev_pm_ops omap2_mcspi_pm_ops = { + .resume = omap2_mcspi_resume, +}; + static struct platform_driver omap2_mcspi_driver = { .driver = { .name = "omap2_mcspi", .owner = THIS_MODULE, + .pm = &omap2_mcspi_pm_ops }, .remove = __exit_p(omap2_mcspi_remove), }; From 7ad1227818f09242cfe9bf1845fd24211f5f99bd Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 9 Dec 2010 08:11:38 +0000 Subject: [PATCH 29/66] kconfig: fix undesirable side effect of adding "visible" menu attribute This lead to non-selected, non-user-selectable options to be written out to .config. This is not only pointless, but also preventing the user to be prompted should any of those options eventually become visible (e.g. by de-selecting the *_AUTO options the "visible" attribute was added for. Furthermore it is quite logical for the "visible" attribute of a menu to control the visibility of all contained prompts, which is what the patch does. Signed-off-by: Jan Beulich Signed-off-by: Michal Marek --- scripts/kconfig/menu.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c index b9d9aa18e6d6..5f77dcb8977e 100644 --- a/scripts/kconfig/menu.c +++ b/scripts/kconfig/menu.c @@ -140,6 +140,20 @@ struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *e } if (current_entry->prompt && current_entry != &rootmenu) prop_warn(prop, "prompt redefined"); + + /* Apply all upper menus' visibilities to actual prompts. */ + if(type == P_PROMPT) { + struct menu *menu = current_entry; + + while ((menu = menu->parent) != NULL) { + if (!menu->visibility) + continue; + prop->visible.expr + = expr_alloc_and(prop->visible.expr, + menu->visibility); + } + } + current_entry->prompt = prop; } prop->text = prompt; From 0bc463426ab5eb39e76df637b29a4f191d01b8a0 Mon Sep 17 00:00:00 2001 From: Jate Sujjavanich Date: Wed, 29 Sep 2010 09:44:32 -0400 Subject: [PATCH 30/66] spi/m68knommu: Coldfire QSPI platform support After grabbing a msg from the msgq, the mcfqspi_work function calls list_del_init on the mcfqspi->msgq which unintentionally deletes the rest of the list before it can be processed. If qspi call was made using spi_sync, this can result in a process hang. Signed-off-by: Jate Sujjavanich Acked-by: Steven King Signed-off-by: Grant Likely --- drivers/spi/coldfire_qspi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/coldfire_qspi.c b/drivers/spi/coldfire_qspi.c index 052b3c7fa6a0..8856bcca9d29 100644 --- a/drivers/spi/coldfire_qspi.c +++ b/drivers/spi/coldfire_qspi.c @@ -317,7 +317,7 @@ static void mcfqspi_work(struct work_struct *work) msg = container_of(mcfqspi->msgq.next, struct spi_message, queue); - list_del_init(&mcfqspi->msgq); + list_del_init(&msg->queue); spin_unlock_irqrestore(&mcfqspi->lock, flags); spi = msg->spi; From d81a12bc29ae4038770e05dce4ab7f26fd5880fb Mon Sep 17 00:00:00 2001 From: Dan Rosenberg Date: Sat, 25 Dec 2010 16:23:40 -0500 Subject: [PATCH 31/66] sound: Prevent buffer overflow in OSS load_mixer_volumes The load_mixer_volumes() function, which can be triggered by unprivileged users via the SOUND_MIXER_SETLEVELS ioctl, is vulnerable to a buffer overflow. Because the provided "name" argument isn't guaranteed to be NULL terminated at the expected 32 bytes, it's possible to overflow past the end of the last element in the mixer_vols array. Further exploitation can result in an arbitrary kernel write (via subsequent calls to load_mixer_volumes()) leading to privilege escalation, or arbitrary kernel reads via get_mixer_levels(). In addition, the strcmp() may leak bytes beyond the mixer_vols array. Signed-off-by: Dan Rosenberg Cc: stable Signed-off-by: Takashi Iwai --- sound/oss/soundcard.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/oss/soundcard.c b/sound/oss/soundcard.c index 46c0d03dbecc..fcb14a099822 100644 --- a/sound/oss/soundcard.c +++ b/sound/oss/soundcard.c @@ -87,7 +87,7 @@ int *load_mixer_volumes(char *name, int *levels, int present) int i, n; for (i = 0; i < num_mixer_volumes; i++) { - if (strcmp(name, mixer_vols[i].name) == 0) { + if (strncmp(name, mixer_vols[i].name, 32) == 0) { if (present) mixer_vols[i].num = i; return mixer_vols[i].levels; @@ -99,7 +99,7 @@ int *load_mixer_volumes(char *name, int *levels, int present) } n = num_mixer_volumes++; - strcpy(mixer_vols[n].name, name); + strncpy(mixer_vols[n].name, name, 32); if (present) mixer_vols[n].num = n; From e03fa055bc126e536c7f65862e08a9b143138ea9 Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Tue, 28 Dec 2010 17:20:02 -0500 Subject: [PATCH 32/66] ALSA: hda: Use LPIB quirk for Dell Inspiron m101z/1120 Sjoerd Simons reports that, without using position_fix=1, recording experiences overruns. Work around that by applying the LPIB quirk for his hardware. Reported-and-tested-by: Sjoerd Simons Cc: Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index b030c8eba21f..a1c4008af891 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2300,6 +2300,7 @@ static struct snd_pci_quirk position_fix_list[] __devinitdata = { SND_PCI_QUIRK(0x1028, 0x01cc, "Dell D820", POS_FIX_LPIB), SND_PCI_QUIRK(0x1028, 0x01de, "Dell Precision 390", POS_FIX_LPIB), SND_PCI_QUIRK(0x1028, 0x01f6, "Dell Latitude 131L", POS_FIX_LPIB), + SND_PCI_QUIRK(0x1028, 0x0470, "Dell Inspiron 1120", POS_FIX_LPIB), SND_PCI_QUIRK(0x103c, 0x306d, "HP dv3", POS_FIX_LPIB), SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB), SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB), From bcfbbce822d219eb587acaba8a6e062bbeae4761 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 30 Dec 2010 09:07:15 +0000 Subject: [PATCH 33/66] Revert "drm/i915/bios: Reverse order of 100/120 Mhz SSC clocks" As I feared, whilst this fixed the clocks for the Lenovo U160, it broke many other machines. So lets reverts commit 448f53a1ede54eb854d036abf and search for the real bug. Reported-and-tested-by: Travis Hume [et al] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=25842 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=32698 Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_bios.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 2b2078695d2a..b0b1200ed650 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -270,7 +270,7 @@ parse_general_features(struct drm_i915_private *dev_priv, general->ssc_freq ? 66 : 48; else if (IS_GEN5(dev) || IS_GEN6(dev)) dev_priv->lvds_ssc_freq = - general->ssc_freq ? 120 : 100; + general->ssc_freq ? 100 : 120; else dev_priv->lvds_ssc_freq = general->ssc_freq ? 100 : 96; From cc6455f82edd3f9da3b03870d41cde3cb22ad40d Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 30 Dec 2010 12:54:00 +0000 Subject: [PATCH 34/66] drm/i915/dvo: Report LVDS attached to ch701x as connected As we have already detected something attached to the chip during initialisation, always report the LVDS connector status as connected during probing. Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/dvo_ch7017.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/dvo_ch7017.c b/drivers/gpu/drm/i915/dvo_ch7017.c index af70337567ce..d3e8c540f778 100644 --- a/drivers/gpu/drm/i915/dvo_ch7017.c +++ b/drivers/gpu/drm/i915/dvo_ch7017.c @@ -242,7 +242,7 @@ fail: static enum drm_connector_status ch7017_detect(struct intel_dvo_device *dvo) { - return connector_status_unknown; + return connector_status_connected; } static enum drm_mode_status ch7017_mode_valid(struct intel_dvo_device *dvo, From b83be6f20a0e468f715b14225c9f897538dfe5ad Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 16 Dec 2010 12:04:54 +0100 Subject: [PATCH 35/66] update Documentation/filesystems/Locking Mostly inspired by all the recent BKL removal changes, but a lot of older updates also weren't properly recorded. Signed-off-by: Christoph Hellwig Signed-off-by: Linus Torvalds --- Documentation/filesystems/Locking | 212 ++++++++++++++---------------- 1 file changed, 101 insertions(+), 111 deletions(-) diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index b6426f15b4ae..7686e7684495 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -18,7 +18,6 @@ prototypes: char *(*d_dname)((struct dentry *dentry, char *buffer, int buflen); locking rules: - none have BKL dcache_lock rename_lock ->d_lock may block d_revalidate: no no no yes d_hash no no no yes @@ -42,18 +41,23 @@ ata *); int (*rename) (struct inode *, struct dentry *, struct inode *, struct dentry *); int (*readlink) (struct dentry *, char __user *,int); - int (*follow_link) (struct dentry *, struct nameidata *); + void * (*follow_link) (struct dentry *, struct nameidata *); + void (*put_link) (struct dentry *, struct nameidata *, void *); void (*truncate) (struct inode *); int (*permission) (struct inode *, int, struct nameidata *); + int (*check_acl)(struct inode *, int); int (*setattr) (struct dentry *, struct iattr *); int (*getattr) (struct vfsmount *, struct dentry *, struct kstat *); int (*setxattr) (struct dentry *, const char *,const void *,size_t,int); ssize_t (*getxattr) (struct dentry *, const char *, void *, size_t); ssize_t (*listxattr) (struct dentry *, char *, size_t); int (*removexattr) (struct dentry *, const char *); + void (*truncate_range)(struct inode *, loff_t, loff_t); + long (*fallocate)(struct inode *inode, int mode, loff_t offset, loff_t len); + int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, u64 len); locking rules: - all may block, none have BKL + all may block i_mutex(inode) lookup: yes create: yes @@ -66,19 +70,24 @@ rmdir: yes (both) (see below) rename: yes (all) (see below) readlink: no follow_link: no +put_link: no truncate: yes (see below) setattr: yes permission: no +check_acl: no getattr: no setxattr: yes getxattr: no listxattr: no removexattr: yes +truncate_range: yes +fallocate: no +fiemap: no Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_mutex on victim. cross-directory ->rename() has (per-superblock) ->s_vfs_rename_sem. ->truncate() is never called directly - it's a callback, not a -method. It's called by vmtruncate() - library function normally used by +method. It's called by vmtruncate() - deprecated library function used by ->setattr(). Locking information above applies to that call (i.e. is inherited from ->setattr() - vmtruncate() is used when ATTR_SIZE had been passed). @@ -91,7 +100,7 @@ prototypes: struct inode *(*alloc_inode)(struct super_block *sb); void (*destroy_inode)(struct inode *); void (*dirty_inode) (struct inode *); - int (*write_inode) (struct inode *, int); + int (*write_inode) (struct inode *, struct writeback_control *wbc); int (*drop_inode) (struct inode *); void (*evict_inode) (struct inode *); void (*put_super) (struct super_block *); @@ -105,10 +114,11 @@ prototypes: int (*show_options)(struct seq_file *, struct vfsmount *); ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t); ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t); + int (*bdev_try_to_free_page)(struct super_block*, struct page*, gfp_t); + int (*trim_fs) (struct super_block *, struct fstrim_range *); locking rules: All may block [not true, see below] - None have BKL s_umount alloc_inode: destroy_inode: @@ -127,6 +137,8 @@ umount_begin: no show_options: no (namespace_sem) quota_read: no (see below) quota_write: no (see below) +bdev_try_to_free_page: no (see below) +trim_fs: no ->statfs() has s_umount (shared) when called by ustat(2) (native or compat), but that's an accident of bad API; s_umount is used to pin @@ -139,19 +151,25 @@ be the only ones operating on the quota file by the quota code (via dqio_sem) (unless an admin really wants to screw up something and writes to quota files with quotas on). For other details about locking see also dquot_operations section. +->bdev_try_to_free_page is called from the ->releasepage handler of +the block device inode. See there for more details. --------------------------- file_system_type --------------------------- prototypes: int (*get_sb) (struct file_system_type *, int, const char *, void *, struct vfsmount *); + struct dentry *(*mount) (struct file_system_type *, int, + const char *, void *); void (*kill_sb) (struct super_block *); locking rules: - may block BKL -get_sb yes no -kill_sb yes no + may block +get_sb yes +mount yes +kill_sb yes ->get_sb() returns error or 0 with locked superblock attached to the vfsmount (exclusive on ->s_umount). +->mount() returns ERR_PTR or the root dentry. ->kill_sb() takes a write-locked superblock, does all shutdown work on it, unlocks and drops the reference. @@ -176,27 +194,35 @@ prototypes: void (*freepage)(struct page *); int (*direct_IO)(int, struct kiocb *, const struct iovec *iov, loff_t offset, unsigned long nr_segs); - int (*launder_page) (struct page *); + int (*get_xip_mem)(struct address_space *, pgoff_t, int, void **, + unsigned long *); + int (*migratepage)(struct address_space *, struct page *, struct page *); + int (*launder_page)(struct page *); + int (*is_partially_uptodate)(struct page *, read_descriptor_t *, unsigned long); + int (*error_remove_page)(struct address_space *, struct page *); locking rules: All except set_page_dirty and freepage may block - BKL PageLocked(page) i_mutex -writepage: no yes, unlocks (see below) -readpage: no yes, unlocks -sync_page: no maybe -writepages: no -set_page_dirty no no -readpages: no -write_begin: no locks the page yes -write_end: no yes, unlocks yes -perform_write: no n/a yes -bmap: no -invalidatepage: no yes -releasepage: no yes -freepage: no yes -direct_IO: no -launder_page: no yes + PageLocked(page) i_mutex +writepage: yes, unlocks (see below) +readpage: yes, unlocks +sync_page: maybe +writepages: +set_page_dirty no +readpages: +write_begin: locks the page yes +write_end: yes, unlocks yes +bmap: +invalidatepage: yes +releasepage: yes +freepage: yes +direct_IO: +get_xip_mem: maybe +migratepage: yes (both) +launder_page: yes +is_partially_uptodate: yes +error_remove_page: yes ->write_begin(), ->write_end(), ->sync_page() and ->readpage() may be called from the request handler (/dev/loop). @@ -276,9 +302,8 @@ under spinlock (it cannot block) and is sometimes called with the page not locked. ->bmap() is currently used by legacy ioctl() (FIBMAP) provided by some -filesystems and by the swapper. The latter will eventually go away. All -instances do not actually need the BKL. Please, keep it that way and don't -breed new callers. +filesystems and by the swapper. The latter will eventually go away. Please, +keep it that way and don't breed new callers. ->invalidatepage() is called when the filesystem must attempt to drop some or all of the buffers from the page when it is being truncated. It @@ -299,47 +324,37 @@ cleaned, or an error value if not. Note that in order to prevent the page getting mapped back in and redirtied, it needs to be kept locked across the entire operation. - Note: currently almost all instances of address_space methods are -using BKL for internal serialization and that's one of the worst sources -of contention. Normally they are calling library functions (in fs/buffer.c) -and pass foo_get_block() as a callback (on local block-based filesystems, -indeed). BKL is not needed for library stuff and is usually taken by -foo_get_block(). It's an overkill, since block bitmaps can be protected by -internal fs locking and real critical areas are much smaller than the areas -filesystems protect now. - ----------------------- file_lock_operations ------------------------------ prototypes: - void (*fl_insert)(struct file_lock *); /* lock insertion callback */ - void (*fl_remove)(struct file_lock *); /* lock removal callback */ void (*fl_copy_lock)(struct file_lock *, struct file_lock *); void (*fl_release_private)(struct file_lock *); locking rules: - BKL may block -fl_insert: yes no -fl_remove: yes no -fl_copy_lock: yes no -fl_release_private: yes yes + file_lock_lock may block +fl_copy_lock: yes no +fl_release_private: maybe no ----------------------- lock_manager_operations --------------------------- prototypes: int (*fl_compare_owner)(struct file_lock *, struct file_lock *); void (*fl_notify)(struct file_lock *); /* unblock callback */ + int (*fl_grant)(struct file_lock *, struct file_lock *, int); void (*fl_release_private)(struct file_lock *); void (*fl_break)(struct file_lock *); /* break_lease callback */ + int (*fl_mylease)(struct file_lock *, struct file_lock *); + int (*fl_change)(struct file_lock **, int); locking rules: - BKL may block -fl_compare_owner: yes no -fl_notify: yes no -fl_release_private: yes yes -fl_break: yes no + file_lock_lock may block +fl_compare_owner: yes no +fl_notify: yes no +fl_grant: no no +fl_release_private: maybe no +fl_break: yes no +fl_mylease: yes no +fl_change yes no - Currently only NFSD and NLM provide instances of this class. None of the -them block. If you have out-of-tree instances - please, show up. Locking -in that area will change. --------------------------- buffer_head ----------------------------------- prototypes: void (*b_end_io)(struct buffer_head *bh, int uptodate); @@ -364,17 +379,17 @@ prototypes: void (*swap_slot_free_notify) (struct block_device *, unsigned long); locking rules: - BKL bd_mutex -open: no yes -release: no yes -ioctl: no no -compat_ioctl: no no -direct_access: no no -media_changed: no no -unlock_native_capacity: no no -revalidate_disk: no no -getgeo: no no -swap_slot_free_notify: no no (see below) + bd_mutex +open: yes +release: yes +ioctl: no +compat_ioctl: no +direct_access: no +media_changed: no +unlock_native_capacity: no +revalidate_disk: no +getgeo: no +swap_slot_free_notify: no (see below) media_changed, unlock_native_capacity and revalidate_disk are called only from check_disk_change(). @@ -413,34 +428,21 @@ prototypes: unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long); int (*check_flags)(int); + int (*flock) (struct file *, int, struct file_lock *); + ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, loff_t *, + size_t, unsigned int); + ssize_t (*splice_read)(struct file *, loff_t *, struct pipe_inode_info *, + size_t, unsigned int); + int (*setlease)(struct file *, long, struct file_lock **); }; locking rules: - All may block. - BKL -llseek: no (see below) -read: no -aio_read: no -write: no -aio_write: no -readdir: no -poll: no -unlocked_ioctl: no -compat_ioctl: no -mmap: no -open: no -flush: no -release: no -fsync: no (see below) -aio_fsync: no -fasync: no -lock: yes -readv: no -writev: no -sendfile: no -sendpage: no -get_unmapped_area: no -check_flags: no + All may block except for ->setlease. + No VFS locks held on entry except for ->fsync and ->setlease. + +->fsync() has i_mutex on inode. + +->setlease has the file_list_lock held and must not sleep. ->llseek() locking has moved from llseek to the individual llseek implementations. If your fs is not using generic_file_llseek, you @@ -450,17 +452,10 @@ mutex or just to use i_size_read() instead. Note: this does not protect the file->f_pos against concurrent modifications since this is something the userspace has to take care about. -Note: ext2_release() was *the* source of contention on fs-intensive -loads and dropping BKL on ->release() helps to get rid of that (we still -grab BKL for cases when we close a file that had been opened r/w, but that -can and should be done using the internal locking with smaller critical areas). -Current worst offender is ext2_get_block()... - -->fasync() is called without BKL protection, and is responsible for -maintaining the FASYNC bit in filp->f_flags. Most instances call -fasync_helper(), which does that maintenance, so it's not normally -something one needs to worry about. Return values > 0 will be mapped to -zero in the VFS layer. +->fasync() is responsible for maintaining the FASYNC bit in filp->f_flags. +Most instances call fasync_helper(), which does that maintenance, so it's +not normally something one needs to worry about. Return values > 0 will be +mapped to zero in the VFS layer. ->readdir() and ->ioctl() on directories must be changed. Ideally we would move ->readdir() to inode_operations and use a separate method for directory @@ -471,8 +466,6 @@ components. And there are other reasons why the current interface is a mess... ->read on directories probably must go away - we should just enforce -EISDIR in sys_read() and friends. -->fsync() has i_mutex on inode. - --------------------------- dquot_operations ------------------------------- prototypes: int (*write_dquot) (struct dquot *); @@ -507,12 +500,12 @@ prototypes: int (*access)(struct vm_area_struct *, unsigned long, void*, int, int); locking rules: - BKL mmap_sem PageLocked(page) -open: no yes -close: no yes -fault: no yes can return with page locked -page_mkwrite: no yes can return with page locked -access: no yes + mmap_sem PageLocked(page) +open: yes +close: yes +fault: yes can return with page locked +page_mkwrite: yes can return with page locked +access: yes ->fault() is called when a previously not present pte is about to be faulted in. The filesystem must find and return the page associated @@ -539,6 +532,3 @@ VM_IO | VM_PFNMAP VMAs. (if you break something or notice that it is broken and do not fix it yourself - at least put it here) - -ipc/shm.c::shm_delete() - may need BKL. -->read() and ->write() in many drivers are (probably) missing BKL. From ebb76ce16daf6908dc030dec1c00827d37129fe5 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Wed, 29 Dec 2010 14:07:11 -0800 Subject: [PATCH 36/66] memcg: fix wrong VM_BUG_ON() in try_charge()'s mm->owner check At __mem_cgroup_try_charge(), VM_BUG_ON(!mm->owner) is checked. But as commented in mem_cgroup_from_task(), mm->owner can be NULL in some racy case. This check of VM_BUG_ON() is bad. A possible story to hit this is at swapoff()->try_to_unuse(). It passes mm_struct to mem_cgroup_try_charge_swapin() while mm->owner is NULL. If we can't get proper mem_cgroup from swap_cgroup information, mm->owner is used as charge target and we see NULL. Cc: Daisuke Nishimura Cc: KOSAKI Motohiro Reported-by: Hugh Dickins Reported-by: Thomas Meyer Signed-off-by: KAMEZAWA Hiroyuki Reviewed-by: Balbir Singh Signed-off-by: Hugh Dickins Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 7a22b4129211..00bb8a64d028 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -1925,19 +1925,18 @@ again: rcu_read_lock(); p = rcu_dereference(mm->owner); - VM_BUG_ON(!p); /* - * because we don't have task_lock(), "p" can exit while - * we're here. In that case, "mem" can point to root - * cgroup but never be NULL. (and task_struct itself is freed - * by RCU, cgroup itself is RCU safe.) Then, we have small - * risk here to get wrong cgroup. But such kind of mis-account - * by race always happens because we don't have cgroup_mutex(). - * It's overkill and we allow that small race, here. + * Because we don't have task_lock(), "p" can exit. + * In that case, "mem" can point to root or p can be NULL with + * race with swapoff. Then, we have small risk of mis-accouning. + * But such kind of mis-account by race always happens because + * we don't have cgroup_mutex(). It's overkill and we allo that + * small race, here. + * (*) swapoff at el will charge against mm-struct not against + * task-struct. So, mm->owner can be NULL. */ mem = mem_cgroup_from_task(p); - VM_BUG_ON(!mem); - if (mem_cgroup_is_root(mem)) { + if (!mem || mem_cgroup_is_root(mem)) { rcu_read_unlock(); goto done; } From e983dc2428164698571e1dd1b25c4322181adbac Mon Sep 17 00:00:00 2001 From: Nitin Gupta Date: Thu, 30 Dec 2010 04:07:58 -0500 Subject: [PATCH 37/66] Revert "Staging: zram: work around oops due to startup ordering snafu" This reverts commit 7e24cce38a99f373450db67bf576fe73e8168d66 because it was never appropriate for mainline. Do not check for init flag before starting I/O - zram module is unusable without this fix. The oops mentioned in the reverted commit message was actually a problem only with the zram version as present in project's own repository where we allocate struct zram_stats_cpu upon device initialization. OTOH, In mainline/staging version of zram, we allocate struct stats upfront, so this oops cannot happen in mainline version. Checking for init_done flag in zram_make_request() results in a *no-op* for any I/O operation since we simply always return success. This flag is actually set when the first write occurs on a zram disk which triggers its initialization. Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=25722 Reported-by: Dennis Jansen Signed-off-by: Nitin Gupta Cc: Anton Blanchard Cc: Andrew Morton Cc: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/staging/zram/zram_drv.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c index 8c3c057aa847..d0e9e0207539 100644 --- a/drivers/staging/zram/zram_drv.c +++ b/drivers/staging/zram/zram_drv.c @@ -435,12 +435,6 @@ static int zram_make_request(struct request_queue *queue, struct bio *bio) int ret = 0; struct zram *zram = queue->queuedata; - if (unlikely(!zram->init_done)) { - set_bit(BIO_UPTODATE, &bio->bi_flags); - bio_endio(bio, 0); - return 0; - } - if (!valid_io_request(zram, bio)) { zram_stat64_inc(zram, &zram->stats.invalid_io); bio_io_error(bio); From 9f260e0efa4766e56d0ac14f1aeea6ee5eb8fe83 Mon Sep 17 00:00:00 2001 From: Dan Rosenberg Date: Sun, 26 Dec 2010 06:54:53 +0000 Subject: [PATCH 38/66] CAN: Use inode instead of kernel address for /proc file Since the socket address is just being used as a unique identifier, its inode number is an alternative that does not leak potentially sensitive information. CC-ing stable because MITRE has assigned CVE-2010-4565 to the issue. Signed-off-by: Dan Rosenberg Acked-by: Oliver Hartkopp Signed-off-by: David S. Miller --- net/can/bcm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/can/bcm.c b/net/can/bcm.c index 6faa8256e10c..9d5e8accfab1 100644 --- a/net/can/bcm.c +++ b/net/can/bcm.c @@ -125,7 +125,7 @@ struct bcm_sock { struct list_head tx_ops; unsigned long dropped_usr_msgs; struct proc_dir_entry *bcm_proc_read; - char procname [20]; /* pointer printed in ASCII with \0 */ + char procname [32]; /* inode number in decimal with \0 */ }; static inline struct bcm_sock *bcm_sk(const struct sock *sk) @@ -1521,7 +1521,7 @@ static int bcm_connect(struct socket *sock, struct sockaddr *uaddr, int len, if (proc_dir) { /* unique socket address as filename */ - sprintf(bo->procname, "%p", sock); + sprintf(bo->procname, "%lu", sock_i_ino(sk)); bo->bcm_proc_read = proc_create_data(bo->procname, 0644, proc_dir, &bcm_proc_fops, sk); From 2393c944d5d60eedaede80273ede8a816b5fa3e0 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 26 Dec 2010 09:59:58 +0000 Subject: [PATCH 39/66] ISDN, Gigaset: Fix memory leak in do_disconnect_req() Hi, In drivers/isdn/gigaset/capi.c::do_disconnect_req() we will leak the memory allocated (with kmalloc) to 'b3cmsg' if the call to alloc_skb() fails. ... b3cmsg = kmalloc(sizeof(*b3cmsg), GFP_KERNEL); allocation here ------^ if (!b3cmsg) { dev_err(cs->dev, "%s: out of memory\n", __func__); send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR); return; } capi_cmsg_header(b3cmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND, ap->nextMessageNumber++, cmsg->adr.adrPLCI | (1 << 16)); b3cmsg->Reason_B3 = CapiProtocolErrorLayer1; b3skb = alloc_skb(CAPI_DISCONNECT_B3_IND_BASELEN, GFP_KERNEL); if (b3skb == NULL) { dev_err(cs->dev, "%s: out of memory\n", __func__); send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR); return; leak here ------^ ... This leak is easily fixed by just kfree()'ing the memory allocated to 'b3cmsg' right before we return. The following patch does that. Signed-off-by: Jesper Juhl Acked-by: Tilman Schmidt Signed-off-by: David S. Miller --- drivers/isdn/gigaset/capi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/isdn/gigaset/capi.c b/drivers/isdn/gigaset/capi.c index bcc174e4f3b1..658e75f18d05 100644 --- a/drivers/isdn/gigaset/capi.c +++ b/drivers/isdn/gigaset/capi.c @@ -1900,6 +1900,7 @@ static void do_disconnect_req(struct gigaset_capi_ctr *iif, if (b3skb == NULL) { dev_err(cs->dev, "%s: out of memory\n", __func__); send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR); + kfree(b3cmsg); return; } capi_cmsg2message(b3cmsg, From f7e4c9775ea648deed4a8193951e50d0c7706173 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Fri, 31 Dec 2010 11:18:48 -0800 Subject: [PATCH 40/66] Broadcom CNIC core network driver: fix mem leak on allocation failures in cnic_alloc_uio_rings() We are leaking memory in drivers/net/cnic.c::cnic_alloc_uio_rings() if either of the calls to dma_alloc_coherent() fail. This patch fixes it by freeing both the memory allocated with kzalloc() and memory allocated with previous calls to dma_alloc_coherent() when there's a failure. Thanks to Joe Perches for suggesting a better implementation than my initial version. Signed-off-by: Jesper Juhl Acked-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/cnic.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c index 92bac19ad60a..6dff32196c92 100644 --- a/drivers/net/cnic.c +++ b/drivers/net/cnic.c @@ -940,7 +940,7 @@ static int cnic_alloc_uio_rings(struct cnic_dev *dev, int pages) &udev->l2_ring_map, GFP_KERNEL | __GFP_COMP); if (!udev->l2_ring) - return -ENOMEM; + goto err_udev; udev->l2_buf_size = (cp->l2_rx_ring_size + 1) * cp->l2_single_buf_size; udev->l2_buf_size = PAGE_ALIGN(udev->l2_buf_size); @@ -948,7 +948,7 @@ static int cnic_alloc_uio_rings(struct cnic_dev *dev, int pages) &udev->l2_buf_map, GFP_KERNEL | __GFP_COMP); if (!udev->l2_buf) - return -ENOMEM; + goto err_dma; write_lock(&cnic_dev_lock); list_add(&udev->list, &cnic_udev_list); @@ -959,6 +959,12 @@ static int cnic_alloc_uio_rings(struct cnic_dev *dev, int pages) cp->udev = udev; return 0; + err_dma: + dma_free_coherent(&udev->pdev->dev, udev->l2_ring_size, + udev->l2_ring, udev->l2_ring_map); + err_udev: + kfree(udev); + return -ENOMEM; } static int cnic_init_uio(struct cnic_dev *dev) From 824f5f38d3005c346a043dedcfe8b048b699b81a Mon Sep 17 00:00:00 2001 From: David Sterba Date: Wed, 29 Dec 2010 03:40:31 +0000 Subject: [PATCH 41/66] tg3: fix return value check in tg3_read_vpd() Besides -ETIMEDOUT and -EINTR, pci_read_vpd may return other error values like -ENODEV or -EINVAL which are ignored due to the buggy check, but the data are not read from VPD anyway and this is checked subsequently with at most 3 needless loop iterations. This does not show up as a runtime bug. CC: Matt Carlson CC: Michael Chan Signed-off-by: David Sterba Signed-off-by: David S. Miller --- drivers/net/tg3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 30ccbb6d097a..6f97b7bbcbf1 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -12658,7 +12658,7 @@ static void __devinit tg3_read_vpd(struct tg3 *tp) cnt = pci_read_vpd(tp->pdev, pos, TG3_NVM_VPD_LEN - pos, &vpd_data[pos]); - if (cnt == -ETIMEDOUT || -EINTR) + if (cnt == -ETIMEDOUT || cnt == -EINTR) cnt = 0; else if (cnt < 0) goto out_not_found; From f4d5900a99dbc354ef1ba384d445ff80ae4d77b4 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 29 Dec 2010 04:26:17 +0000 Subject: [PATCH 42/66] starfire: Fix dma_addr_t size test for MIPS Commit 56543af "starfire: use BUILD_BUG_ON for netdrv_addr_t" revealed that the preprocessor condition used to find the size of dma_addr_t yielded the wrong result for some architectures and configurations. This was kluged for 64-bit PowerPC in commit 3e502e6 by adding yet another case to the condition. However, 64-bit MIPS configurations are not detected reliably either. This should be fixed by using CONFIG_ARCH_DMA_ADDR_T_64BIT, but that isn't yet defined everywhere it should be. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/starfire.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index 4adf12422787..a4f2bd52e546 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -148,7 +148,7 @@ static int full_duplex[MAX_UNITS] = {0, }; * This SUCKS. * We need a much better method to determine if dma_addr_t is 64-bit. */ -#if (defined(__i386__) && defined(CONFIG_HIGHMEM64G)) || defined(__x86_64__) || defined (__ia64__) || defined(__alpha__) || defined(__mips64__) || (defined(__mips__) && defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) || (defined(__powerpc64__) || defined(CONFIG_PHYS_64BIT)) +#if (defined(__i386__) && defined(CONFIG_HIGHMEM64G)) || defined(__x86_64__) || defined (__ia64__) || defined(__alpha__) || (defined(CONFIG_MIPS) && ((defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) || defined(CONFIG_64BIT))) || (defined(__powerpc64__) || defined(CONFIG_PHYS_64BIT)) /* 64-bit dma_addr_t */ #define ADDR_64BITS /* This chip uses 64 bit addresses. */ #define netdrv_addr_t __le64 From b9556f9a1abdc56a179ac7ba6053469373b6de0f Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 29 Dec 2010 04:01:03 +0000 Subject: [PATCH 43/66] drivers/atm/atmtcp.c: add missing atm_dev_put The earlier call to atm_dev_lookup increases the reference count of dev, so decrease it on the way out. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression x, E; constant C; @@ x = atm_dev_lookup(...); ... when != false x != NULL when != true x == NULL when != \(E = x\|x = E\) when != atm_dev_put(dev); *return -C; // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/atm/atmtcp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/atm/atmtcp.c b/drivers/atm/atmtcp.c index 2b464b631f22..0b0625054a87 100644 --- a/drivers/atm/atmtcp.c +++ b/drivers/atm/atmtcp.c @@ -392,7 +392,10 @@ static int atmtcp_attach(struct atm_vcc *vcc,int itf) atm_dev_put(dev); return -EMEDIUMTYPE; } - if (PRIV(dev)->vcc) return -EBUSY; + if (PRIV(dev)->vcc) { + atm_dev_put(dev); + return -EBUSY; + } } else { int error; From d0dfc6b74a0c6e9ee46b62713256e2b025244d3c Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Fri, 31 Dec 2010 10:52:15 +0200 Subject: [PATCH 44/66] KVM: i8259: initialize isr_ack isr_ack is never initialized. So, until the first PIC reset, interrupts may fail to be injected. This can cause Windows XP to fail to boot, as reported in the fallout from the fix to https://bugzilla.kernel.org/show_bug.cgi?id=21962. Reported-and-tested-by: Nicolas Prochazka Signed-off-by: Avi Kivity --- arch/x86/kvm/i8259.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c index f628234fbeca..3cece05e4ac4 100644 --- a/arch/x86/kvm/i8259.c +++ b/arch/x86/kvm/i8259.c @@ -575,6 +575,8 @@ struct kvm_pic *kvm_create_pic(struct kvm *kvm) s->pics[1].elcr_mask = 0xde; s->pics[0].pics_state = s; s->pics[1].pics_state = s; + s->pics[0].isr_ack = 0xff; + s->pics[1].isr_ack = 0xff; /* * Initialize PIO device From b518a64983cbf2ff31aed530898de2d80e4573d5 Mon Sep 17 00:00:00 2001 From: Maurus Cuelenaere Date: Sun, 2 Jan 2011 14:48:16 -0500 Subject: [PATCH 45/66] hwmon: (s3c-hwmon) Fix compilation The owner field was removed from struct attribute in 6fd69dc578fa0b1bbc3aad70ae3af9a137211707, so don't assign it anymore. Signed-off-by: Maurus Cuelenaere Signed-off-by: Guenter Roeck --- drivers/hwmon/s3c-hwmon.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c index 05248f2d7581..92b42db43bcf 100644 --- a/drivers/hwmon/s3c-hwmon.c +++ b/drivers/hwmon/s3c-hwmon.c @@ -234,7 +234,6 @@ static int s3c_hwmon_create_attr(struct device *dev, attr->index = channel; attr->dev_attr.attr.name = attrs->in_name; attr->dev_attr.attr.mode = S_IRUGO; - attr->dev_attr.attr.owner = THIS_MODULE; attr->dev_attr.show = s3c_hwmon_ch_show; ret = device_create_file(dev, &attr->dev_attr); @@ -252,7 +251,6 @@ static int s3c_hwmon_create_attr(struct device *dev, attr->index = channel; attr->dev_attr.attr.name = attrs->label_name; attr->dev_attr.attr.mode = S_IRUGO; - attr->dev_attr.attr.owner = THIS_MODULE; attr->dev_attr.show = s3c_hwmon_label_show; ret = device_create_file(dev, &attr->dev_attr); From 551423748a4eba55f2eb0fc250d757986471f187 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sun, 2 Jan 2011 23:02:42 +0000 Subject: [PATCH 46/66] watchdog: Improve initialisation error message and documentation The error message 'NMI watchdog failed to create perf event...' does not make it clear that this is a fatal error for the watchdog. It also currently prints the error value as a pointer, rather than extracting the error code with PTR_ERR(). Fix that. Add a note to the description of the 'nowatchdog' kernel parameter to associate it with this message. Reported-by: Cesare Leonardi Signed-off-by: Ben Hutchings Cc: 599368@bugs.debian.org Cc: 608138@bugs.debian.org Cc: Don Zickus Cc: Frederic Weisbecker Cc: # .37.x and later LKML-Reference: <1294009362.3167.126.camel@localhost> Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 2 +- kernel/watchdog.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 8b61c9360999..01ece1b9213e 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1759,7 +1759,7 @@ and is between 256 and 4096 characters. It is defined in the file nousb [USB] Disable the USB subsystem - nowatchdog [KNL] Disable the lockup detector. + nowatchdog [KNL] Disable the lockup detector (NMI watchdog). nowb [ARM] diff --git a/kernel/watchdog.c b/kernel/watchdog.c index 6e3c41a4024c..5b082156cd21 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -364,7 +364,8 @@ static int watchdog_nmi_enable(int cpu) goto out_save; } - printk(KERN_ERR "NMI watchdog failed to create perf event on cpu%i: %p\n", cpu, event); + printk(KERN_ERR "NMI watchdog disabled for cpu%i: unable to create perf event: %ld\n", + cpu, PTR_ERR(event)); return PTR_ERR(event); /* success path */ From 7c0ab43e6ab09d72dc8dbac2521b2f819ccc4026 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 3 Jan 2011 02:26:53 +0100 Subject: [PATCH 47/66] ARM: 6605/1: Add missing include "asm/memory.h" This patch fixes below build error by adding the missing asm/memory.h, which is needed for arch_is_coherent(). $ make pxa3xx_defconfig; make CC init/do_mounts_rd.o In file included from include/linux/list_bl.h:5, from include/linux/rculist_bl.h:7, from include/linux/dcache.h:7, from include/linux/fs.h:381, from init/do_mounts_rd.c:3: include/linux/bit_spinlock.h: In function 'bit_spin_unlock': include/linux/bit_spinlock.h:61: error: implicit declaration of function 'arch_is_coherent' make[1]: *** [init/do_mounts_rd.o] Error 1 make: *** [init] Error 2 Signed-off-by: Axel Lin Acked-by: Peter Huewe Signed-off-by: Russell King --- arch/arm/include/asm/system.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 1120f18a6b17..80025948b8ad 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -150,6 +150,7 @@ extern unsigned int user_debug; #define rmb() dmb() #define wmb() mb() #else +#include #define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) #define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) #define wmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) From 8333f65ef094e47020cd01452b4637e7daf5a77f Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Tue, 21 Dec 2010 16:53:39 +0200 Subject: [PATCH 48/66] mv_xor: fix race in tasklet function use mv_xor_slot_cleanup() instead of __mv_xor_slot_cleanup() as the former function aquires the spin lock that needed to protect the drivers data. Cc: Signed-off-by: Saeed Bishara Signed-off-by: Dan Williams --- drivers/dma/mv_xor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c index 411d5bf50fc4..a25f5f61e0e0 100644 --- a/drivers/dma/mv_xor.c +++ b/drivers/dma/mv_xor.c @@ -449,7 +449,7 @@ mv_xor_slot_cleanup(struct mv_xor_chan *mv_chan) static void mv_xor_tasklet(unsigned long data) { struct mv_xor_chan *chan = (struct mv_xor_chan *) data; - __mv_xor_slot_cleanup(chan); + mv_xor_slot_cleanup(chan); } static struct mv_xor_desc_slot * From 8f33d5277fada0291ea495f7fd44a3e7b7aa41d3 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 22 Dec 2010 14:46:46 +0100 Subject: [PATCH 49/66] dmaengine: provide dummy functions for DMA_ENGINE=n This lets drivers, optionally using the dmaengine, build with DMA_ENGINE unselected. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Dan Williams --- include/linux/dmaengine.h | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 9d8688b92d8b..8cd00ad98d37 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -824,6 +824,8 @@ enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie); #ifdef CONFIG_DMA_ENGINE enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx); void dma_issue_pending_all(void); +struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param); +void dma_release_channel(struct dma_chan *chan); #else static inline enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx) { @@ -831,7 +833,14 @@ static inline enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descript } static inline void dma_issue_pending_all(void) { - do { } while (0); +} +static inline struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, + dma_filter_fn fn, void *fn_param) +{ + return NULL; +} +static inline void dma_release_channel(struct dma_chan *chan) +{ } #endif @@ -842,8 +851,6 @@ void dma_async_device_unregister(struct dma_device *device); void dma_run_dependencies(struct dma_async_tx_descriptor *tx); struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type); #define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y) -struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param); -void dma_release_channel(struct dma_chan *chan); /* --- Helper iov-locking functions --- */ From f23b7952d37c69c0caa6c8dfb85dbf2eb9e5fcaa Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 5 Dec 2010 19:42:30 -0300 Subject: [PATCH 50/66] [media] cx25840: Prevent device probe failure due to volume control ERANGE error This patch fixes a regression that crept into 2.6.36. The volume control scale in the cx25840 driver has an unusual mapping from register values to v4l2 volume control values. Enforce the mapping limits, so that the default volume control setting does not fall out of bounds to prevent the cx25840 module device probe from failing. Signed-off-by: Andy Walls Cc: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx25840/cx25840-core.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index dfb198d0415b..f16461844c5c 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -1989,8 +1989,23 @@ static int cx25840_probe(struct i2c_client *client, v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops, V4L2_CID_HUE, -128, 127, 1, 0); if (!is_cx2583x(state)) { - default_volume = 228 - cx25840_read(client, 0x8d4); - default_volume = ((default_volume / 2) + 23) << 9; + default_volume = cx25840_read(client, 0x8d4); + /* + * Enforce the legacy PVR-350/MSP3400 to PVR-150/CX25843 volume + * scale mapping limits to avoid -ERANGE errors when + * initializing the volume control + */ + if (default_volume > 228) { + /* Bottom out at -96 dB, v4l2 vol range 0x2e00-0x2fff */ + default_volume = 228; + cx25840_write(client, 0x8d4, 228); + } + else if (default_volume < 20) { + /* Top out at + 8 dB, v4l2 vol range 0xfe00-0xffff */ + default_volume = 20; + cx25840_write(client, 0x8d4, 20); + } + default_volume = (((228 - default_volume) >> 1) + 23) << 9; state->volume = v4l2_ctrl_new_std(&state->hdl, &cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME, From 46e67acd5d4cacda758e871eebd15cef4e2c2665 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 3 Jan 2011 09:09:56 -0200 Subject: [PATCH 51/66] [media] wm8775: Revert changeset fcb9757333 to avoid a regression It seems that cx88 and ivtv use wm8775 on some different modes. The patch that added support for a board with wm8775 broke ivtv boards with this device. As we're too close to release 2.6.37, let's just revert it. Reported-by: Andy Walls Reported-by: Eric Sharkey Reported-by: Auric Reported by: David Gesswein Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-alsa.c | 99 +++--------------------- drivers/media/video/cx88/cx88-cards.c | 7 ++ drivers/media/video/cx88/cx88-video.c | 27 +------ drivers/media/video/cx88/cx88.h | 6 +- drivers/media/video/wm8775.c | 104 ++++++++++---------------- include/media/wm8775.h | 3 - 6 files changed, 61 insertions(+), 185 deletions(-) diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c index 4aaa47c0eabf..54b7fcd469a8 100644 --- a/drivers/media/video/cx88/cx88-alsa.c +++ b/drivers/media/video/cx88/cx88-alsa.c @@ -40,7 +40,6 @@ #include #include #include -#include #include "cx88.h" #include "cx88-reg.h" @@ -587,47 +586,26 @@ static int snd_cx88_volume_put(struct snd_kcontrol *kcontrol, int left, right, v, b; int changed = 0; u32 old; - struct v4l2_control client_ctl; - - /* Pass volume & balance onto any WM8775 */ - if (value->value.integer.value[0] >= value->value.integer.value[1]) { - v = value->value.integer.value[0] << 10; - b = value->value.integer.value[0] ? - (0x8000 * value->value.integer.value[1]) / value->value.integer.value[0] : - 0x8000; - } else { - v = value->value.integer.value[1] << 10; - b = value->value.integer.value[1] ? - 0xffff - (0x8000 * value->value.integer.value[0]) / value->value.integer.value[1] : - 0x8000; - } - client_ctl.value = v; - client_ctl.id = V4L2_CID_AUDIO_VOLUME; - call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl); - - client_ctl.value = b; - client_ctl.id = V4L2_CID_AUDIO_BALANCE; - call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl); left = value->value.integer.value[0] & 0x3f; right = value->value.integer.value[1] & 0x3f; b = right - left; if (b < 0) { - v = 0x3f - left; - b = (-b) | 0x40; + v = 0x3f - left; + b = (-b) | 0x40; } else { - v = 0x3f - right; + v = 0x3f - right; } /* Do we really know this will always be called with IRQs on? */ spin_lock_irq(&chip->reg_lock); old = cx_read(AUD_VOL_CTL); if (v != (old & 0x3f)) { - cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, (old & ~0x3f) | v); - changed = 1; + cx_write(AUD_VOL_CTL, (old & ~0x3f) | v); + changed = 1; } - if ((cx_read(AUD_BAL_CTL) & 0x7f) != b) { - cx_write(AUD_BAL_CTL, b); - changed = 1; + if (cx_read(AUD_BAL_CTL) != b) { + cx_write(AUD_BAL_CTL, b); + changed = 1; } spin_unlock_irq(&chip->reg_lock); @@ -640,7 +618,7 @@ static const struct snd_kcontrol_new snd_cx88_volume = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, - .name = "Analog-TV Volume", + .name = "Playback Volume", .info = snd_cx88_volume_info, .get = snd_cx88_volume_get, .put = snd_cx88_volume_put, @@ -671,14 +649,7 @@ static int snd_cx88_switch_put(struct snd_kcontrol *kcontrol, vol = cx_read(AUD_VOL_CTL); if (value->value.integer.value[0] != !(vol & bit)) { vol ^= bit; - cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, vol); - /* Pass mute onto any WM8775 */ - if ((1<<6) == bit) { - struct v4l2_control client_ctl; - client_ctl.value = 0 != (vol & bit); - client_ctl.id = V4L2_CID_AUDIO_MUTE; - call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl); - } + cx_write(AUD_VOL_CTL, vol); ret = 1; } spin_unlock_irq(&chip->reg_lock); @@ -687,7 +658,7 @@ static int snd_cx88_switch_put(struct snd_kcontrol *kcontrol, static const struct snd_kcontrol_new snd_cx88_dac_switch = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Audio-Out Switch", + .name = "Playback Switch", .info = snd_ctl_boolean_mono_info, .get = snd_cx88_switch_get, .put = snd_cx88_switch_put, @@ -696,49 +667,13 @@ static const struct snd_kcontrol_new snd_cx88_dac_switch = { static const struct snd_kcontrol_new snd_cx88_source_switch = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Analog-TV Switch", + .name = "Capture Switch", .info = snd_ctl_boolean_mono_info, .get = snd_cx88_switch_get, .put = snd_cx88_switch_put, .private_value = (1<<6), }; -static int snd_cx88_alc_get(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *value) -{ - snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol); - struct cx88_core *core = chip->core; - struct v4l2_control client_ctl; - - client_ctl.id = V4L2_CID_AUDIO_LOUDNESS; - call_hw(core, WM8775_GID, core, g_ctrl, &client_ctl); - value->value.integer.value[0] = client_ctl.value ? 1 : 0; - - return 0; -} - -static int snd_cx88_alc_put(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *value) -{ - snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol); - struct cx88_core *core = chip->core; - struct v4l2_control client_ctl; - - client_ctl.value = 0 != value->value.integer.value[0]; - client_ctl.id = V4L2_CID_AUDIO_LOUDNESS; - call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl); - - return 0; -} - -static struct snd_kcontrol_new snd_cx88_alc_switch = { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Line-In ALC Switch", - .info = snd_ctl_boolean_mono_info, - .get = snd_cx88_alc_get, - .put = snd_cx88_alc_put, -}; - /**************************************************************************** Basic Flow for Sound Devices ****************************************************************************/ @@ -860,7 +795,6 @@ static int __devinit cx88_audio_initdev(struct pci_dev *pci, { struct snd_card *card; snd_cx88_card_t *chip; - struct v4l2_subdev *sd; int err; if (devno >= SNDRV_CARDS) @@ -896,15 +830,6 @@ static int __devinit cx88_audio_initdev(struct pci_dev *pci, if (err < 0) goto error; - /* If there's a wm8775 then add a Line-In ALC switch */ - list_for_each_entry(sd, &chip->core->v4l2_dev.subdevs, list) { - if (WM8775_GID == sd->grp_id) { - snd_ctl_add(card, snd_ctl_new1(&snd_cx88_alc_switch, - chip)); - break; - } - } - strcpy (card->driver, "CX88x"); sprintf(card->shortname, "Conexant CX%x", pci->device); sprintf(card->longname, "%s at %#llx", diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 9b9e169cce90..0ccc2afd7266 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1007,15 +1007,22 @@ static const struct cx88_board cx88_boards[] = { .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, + .audio_chip = V4L2_IDENT_WM8775, .input = {{ .type = CX88_VMUX_DVB, .vmux = 0, + /* 2: Line-In */ + .audioroute = 2, },{ .type = CX88_VMUX_COMPOSITE1, .vmux = 1, + /* 2: Line-In */ + .audioroute = 2, },{ .type = CX88_VMUX_SVIDEO, .vmux = 2, + /* 2: Line-In */ + .audioroute = 2, }}, .mpeg = CX88_MPEG_DVB, }, diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 62cea9549404..d9249e5a04c9 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -40,7 +40,6 @@ #include "cx88.h" #include #include -#include MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards"); MODULE_AUTHOR("Gerd Knorr [SuSE Labs]"); @@ -977,7 +976,6 @@ int cx88_set_control(struct cx88_core *core, struct v4l2_control *ctl) const struct cx88_ctrl *c = NULL; u32 value,mask; int i; - struct v4l2_control client_ctl; for (i = 0; i < CX8800_CTLS; i++) { if (cx8800_ctls[i].v.id == ctl->id) { @@ -991,27 +989,6 @@ int cx88_set_control(struct cx88_core *core, struct v4l2_control *ctl) ctl->value = c->v.minimum; if (ctl->value > c->v.maximum) ctl->value = c->v.maximum; - - /* Pass changes onto any WM8775 */ - client_ctl.id = ctl->id; - switch (ctl->id) { - case V4L2_CID_AUDIO_MUTE: - client_ctl.value = ctl->value; - break; - case V4L2_CID_AUDIO_VOLUME: - client_ctl.value = (ctl->value) ? - (0x90 + ctl->value) << 8 : 0; - break; - case V4L2_CID_AUDIO_BALANCE: - client_ctl.value = ctl->value << 9; - break; - default: - client_ctl.id = 0; - break; - } - if (client_ctl.id) - call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl); - mask=c->mask; switch (ctl->id) { case V4L2_CID_AUDIO_BALANCE: @@ -1558,9 +1535,7 @@ static int radio_queryctrl (struct file *file, void *priv, if (c->id < V4L2_CID_BASE || c->id >= V4L2_CID_LASTP1) return -EINVAL; - if (c->id == V4L2_CID_AUDIO_MUTE || - c->id == V4L2_CID_AUDIO_VOLUME || - c->id == V4L2_CID_AUDIO_BALANCE) { + if (c->id == V4L2_CID_AUDIO_MUTE) { for (i = 0; i < CX8800_CTLS; i++) { if (cx8800_ctls[i].v.id == c->id) break; diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index e8c732e7ae4f..c9981e77416a 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -398,19 +398,17 @@ static inline struct cx88_core *to_core(struct v4l2_device *v4l2_dev) return container_of(v4l2_dev, struct cx88_core, v4l2_dev); } -#define call_hw(core, grpid, o, f, args...) \ +#define call_all(core, o, f, args...) \ do { \ if (!core->i2c_rc) { \ if (core->gate_ctrl) \ core->gate_ctrl(core, 1); \ - v4l2_device_call_all(&core->v4l2_dev, grpid, o, f, ##args); \ + v4l2_device_call_all(&core->v4l2_dev, 0, o, f, ##args); \ if (core->gate_ctrl) \ core->gate_ctrl(core, 0); \ } \ } while (0) -#define call_all(core, o, f, args...) call_hw(core, 0, o, f, ##args) - struct cx8800_dev; struct cx8802_dev; diff --git a/drivers/media/video/wm8775.c b/drivers/media/video/wm8775.c index 135525649086..fe8ef6419f83 100644 --- a/drivers/media/video/wm8775.c +++ b/drivers/media/video/wm8775.c @@ -35,7 +35,6 @@ #include #include #include -#include MODULE_DESCRIPTION("wm8775 driver"); MODULE_AUTHOR("Ulf Eklund, Hans Verkuil"); @@ -51,16 +50,10 @@ enum { TOT_REGS }; -#define ALC_HOLD 0x85 /* R17: use zero cross detection, ALC hold time 42.6 ms */ -#define ALC_EN 0x100 /* R17: ALC enable */ - struct wm8775_state { struct v4l2_subdev sd; struct v4l2_ctrl_handler hdl; struct v4l2_ctrl *mute; - struct v4l2_ctrl *vol; - struct v4l2_ctrl *bal; - struct v4l2_ctrl *loud; u8 input; /* Last selected input (0-0xf) */ }; @@ -92,30 +85,6 @@ static int wm8775_write(struct v4l2_subdev *sd, int reg, u16 val) return -1; } -static void wm8775_set_audio(struct v4l2_subdev *sd, int quietly) -{ - struct wm8775_state *state = to_state(sd); - u8 vol_l, vol_r; - int muted = 0 != state->mute->val; - u16 volume = (u16)state->vol->val; - u16 balance = (u16)state->bal->val; - - /* normalize ( 65535 to 0 -> 255 to 0 (+24dB to -103dB) ) */ - vol_l = (min(65536 - balance, 32768) * volume) >> 23; - vol_r = (min(balance, (u16)32768) * volume) >> 23; - - /* Mute */ - if (muted || quietly) - wm8775_write(sd, R21, 0x0c0 | state->input); - - wm8775_write(sd, R14, vol_l | 0x100); /* 0x100= Left channel ADC zero cross enable */ - wm8775_write(sd, R15, vol_r | 0x100); /* 0x100= Right channel ADC zero cross enable */ - - /* Un-mute */ - if (!muted) - wm8775_write(sd, R21, state->input); -} - static int wm8775_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, u32 config) { @@ -133,26 +102,25 @@ static int wm8775_s_routing(struct v4l2_subdev *sd, state->input = input; if (!v4l2_ctrl_g_ctrl(state->mute)) return 0; - if (!v4l2_ctrl_g_ctrl(state->vol)) - return 0; - if (!v4l2_ctrl_g_ctrl(state->bal)) - return 0; - wm8775_set_audio(sd, 1); + wm8775_write(sd, R21, 0x0c0); + wm8775_write(sd, R14, 0x1d4); + wm8775_write(sd, R15, 0x1d4); + wm8775_write(sd, R21, 0x100 + state->input); return 0; } static int wm8775_s_ctrl(struct v4l2_ctrl *ctrl) { struct v4l2_subdev *sd = to_sd(ctrl); + struct wm8775_state *state = to_state(sd); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: - case V4L2_CID_AUDIO_VOLUME: - case V4L2_CID_AUDIO_BALANCE: - wm8775_set_audio(sd, 0); - return 0; - case V4L2_CID_AUDIO_LOUDNESS: - wm8775_write(sd, R17, (ctrl->val ? ALC_EN : 0) | ALC_HOLD); + wm8775_write(sd, R21, 0x0c0); + wm8775_write(sd, R14, 0x1d4); + wm8775_write(sd, R15, 0x1d4); + if (!ctrl->val) + wm8775_write(sd, R21, 0x100 + state->input); return 0; } return -EINVAL; @@ -176,7 +144,16 @@ static int wm8775_log_status(struct v4l2_subdev *sd) static int wm8775_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *freq) { - wm8775_set_audio(sd, 0); + struct wm8775_state *state = to_state(sd); + + /* If I remove this, then it can happen that I have no + sound the first time I tune from static to a valid channel. + It's difficult to reproduce and is almost certainly related + to the zero cross detect circuit. */ + wm8775_write(sd, R21, 0x0c0); + wm8775_write(sd, R14, 0x1d4); + wm8775_write(sd, R15, 0x1d4); + wm8775_write(sd, R21, 0x100 + state->input); return 0; } @@ -226,7 +203,6 @@ static int wm8775_probe(struct i2c_client *client, { struct wm8775_state *state; struct v4l2_subdev *sd; - int err; /* Check if the adapter supports the needed features */ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) @@ -240,21 +216,15 @@ static int wm8775_probe(struct i2c_client *client, return -ENOMEM; sd = &state->sd; v4l2_i2c_subdev_init(sd, client, &wm8775_ops); - sd->grp_id = WM8775_GID; /* subdev group id */ state->input = 2; - v4l2_ctrl_handler_init(&state->hdl, 4); + v4l2_ctrl_handler_init(&state->hdl, 1); state->mute = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops, V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); - state->vol = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops, - V4L2_CID_AUDIO_VOLUME, 0, 65535, (65535+99)/100, 0xCF00); /* 0dB*/ - state->bal = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops, - V4L2_CID_AUDIO_BALANCE, 0, 65535, (65535+99)/100, 32768); - state->loud = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops, - V4L2_CID_AUDIO_LOUDNESS, 0, 1, 1, 1); sd->ctrl_handler = &state->hdl; - err = state->hdl.error; - if (err) { + if (state->hdl.error) { + int err = state->hdl.error; + v4l2_ctrl_handler_free(&state->hdl); kfree(state); return err; @@ -266,25 +236,29 @@ static int wm8775_probe(struct i2c_client *client, wm8775_write(sd, R23, 0x000); /* Disable zero cross detect timeout */ wm8775_write(sd, R7, 0x000); - /* HPF enable, I2S mode, 24-bit */ - wm8775_write(sd, R11, 0x022); + /* Left justified, 24-bit mode */ + wm8775_write(sd, R11, 0x021); /* Master mode, clock ratio 256fs */ wm8775_write(sd, R12, 0x102); /* Powered up */ wm8775_write(sd, R13, 0x000); - /* ALC stereo, ALC target level -5dB FS, ALC max gain +8dB */ - wm8775_write(sd, R16, 0x1bb); - /* Set ALC mode and hold time */ - wm8775_write(sd, R17, (state->loud->val ? ALC_EN : 0) | ALC_HOLD); + /* ADC gain +2.5dB, enable zero cross */ + wm8775_write(sd, R14, 0x1d4); + /* ADC gain +2.5dB, enable zero cross */ + wm8775_write(sd, R15, 0x1d4); + /* ALC Stereo, ALC target level -1dB FS max gain +8dB */ + wm8775_write(sd, R16, 0x1bf); + /* Enable gain control, use zero cross detection, + ALC hold time 42.6 ms */ + wm8775_write(sd, R17, 0x185); /* ALC gain ramp up delay 34 s, ALC gain ramp down delay 33 ms */ wm8775_write(sd, R18, 0x0a2); /* Enable noise gate, threshold -72dBfs */ wm8775_write(sd, R19, 0x005); - /* Transient window 4ms, ALC min gain -5dB */ - wm8775_write(sd, R20, 0x0fb); - - wm8775_set_audio(sd, 1); /* set volume/mute/mux */ - + /* Transient window 4ms, lower PGA gain limit -1dB */ + wm8775_write(sd, R20, 0x07a); + /* LRBOTH = 1, use input 2. */ + wm8775_write(sd, R21, 0x102); return 0; } diff --git a/include/media/wm8775.h b/include/media/wm8775.h index a1c4d417dfa2..60739c5a23ae 100644 --- a/include/media/wm8775.h +++ b/include/media/wm8775.h @@ -32,7 +32,4 @@ #define WM8775_AIN3 4 #define WM8775_AIN4 8 -/* subdev group ID */ -#define WM8775_GID (1 << 0) - #endif From 8fd0bda511406ef0e9dcce9be055d7ab931e92ba Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 18 Dec 2010 09:59:51 -0300 Subject: [PATCH 52/66] [media] em28xx: radio_fops should also use unlocked_ioctl em28xx uses core assisted locking, so it shouldn't use .ioctl. The .ioctl callback was replaced by .unlocked_ioctl for video nodes, but not for radio nodes. This is now corrected. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 908e3bc88303..2c3007280032 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -2377,7 +2377,7 @@ static const struct v4l2_file_operations radio_fops = { .owner = THIS_MODULE, .open = em28xx_v4l2_open, .release = em28xx_v4l2_close, - .ioctl = video_ioctl2, + .unlocked_ioctl = video_ioctl2, }; static const struct v4l2_ioctl_ops radio_ioctl_ops = { From c7c25802b39c443b3745cfa973dc49a97a3491f8 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Mon, 3 Jan 2011 12:15:14 +0100 Subject: [PATCH 53/66] arch/x86/oprofile/op_model_amd.c: Perform initialisation on a single CPU Disable preemption in init_ibs(). The function only checks the ibs capabilities and sets up pci devices (if necessary). It runs only on one cpu but operates with the local APIC and some MSRs, thus it is better to disable preemption. [ 7.034377] BUG: using smp_processor_id() in preemptible [00000000] code: modprobe/483 [ 7.034385] caller is setup_APIC_eilvt+0x155/0x180 [ 7.034389] Pid: 483, comm: modprobe Not tainted 2.6.37-rc1-20101110+ #1 [ 7.034392] Call Trace: [ 7.034400] [] debug_smp_processor_id+0xd2/0xf0 [ 7.034404] [] setup_APIC_eilvt+0x155/0x180 [ ... ] Addresses https://bugzilla.kernel.org/show_bug.cgi?id=22812 Reported-by: Signed-off-by: Robert Richter Cc: oprofile-list@lists.sourceforge.net Cc: Peter Zijlstra Cc: Frederic Weisbecker Cc: Rafael J. Wysocki Cc: Dan Carpenter Cc: Andrew Morton Cc: [2.6.37.x] LKML-Reference: <20110103111514.GM4739@erda.amd.com> [ small cleanups ] Signed-off-by: Ingo Molnar --- arch/x86/oprofile/op_model_amd.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c index a011bcc0f943..7d90d47655ba 100644 --- a/arch/x86/oprofile/op_model_amd.c +++ b/arch/x86/oprofile/op_model_amd.c @@ -630,21 +630,29 @@ static int __init_ibs_nmi(void) return 0; } -/* initialize the APIC for the IBS interrupts if available */ +/* + * check and reserve APIC extended interrupt LVT offset for IBS if + * available + * + * init_ibs() preforms implicitly cpu-local operations, so pin this + * thread to its current CPU + */ + static void init_ibs(void) { + preempt_disable(); + ibs_caps = get_ibs_caps(); - if (!ibs_caps) - return; + goto out; - if (__init_ibs_nmi()) { + if (__init_ibs_nmi() < 0) ibs_caps = 0; - return; - } + else + printk(KERN_INFO "oprofile: AMD IBS detected (0x%08x)\n", ibs_caps); - printk(KERN_INFO "oprofile: AMD IBS detected (0x%08x)\n", - (unsigned)ibs_caps); +out: + preempt_enable(); } static int (*create_arch_files)(struct super_block *sb, struct dentry *root); From d425de5436a620de506f9e4119bf8daa1cb93718 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Mon, 3 Jan 2011 16:13:11 +0100 Subject: [PATCH 54/66] perf: Fix callchain hit bad cast on ascii display ipchain__fprintf_graph() casts the number of hits in a branch as an int, which means we lose its highests bits. This results in meaningless number of callchain hits in perf.data that have a high number of hits recorded, typically those that have callchain branches hits appearing more than INT_MAX. This happens easily as those are pondered by the event period. Reported-by: Nick Piggin Signed-off-by: Frederic Weisbecker Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Arnaldo Carvalho de Melo Cc: Paul Mackerras --- tools/perf/util/hist.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c index 2022e8740994..76bcc35cf9b1 100644 --- a/tools/perf/util/hist.c +++ b/tools/perf/util/hist.c @@ -356,7 +356,7 @@ static size_t ipchain__fprintf_graph_line(FILE *fp, int depth, int depth_mask, static size_t ipchain__fprintf_graph(FILE *fp, struct callchain_list *chain, int depth, int depth_mask, int period, - u64 total_samples, int hits, + u64 total_samples, u64 hits, int left_margin) { int i; From 82427de2c7c39ee7bcaa4cb0260b4e9b9ab19eb8 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 15 Dec 2010 07:20:16 +0800 Subject: [PATCH 55/66] ARM: pxa: PXA_ESERIES depends on FB_W100. As arch/arm/mach-pxa/eseries.c references w100fb_gpio_{read,write}() directly. Signed-off-by: Lennert Buytenhek Signed-off-by: Eric Miao --- arch/arm/mach-pxa/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index dd235ecc9d6c..c93e73d54dd1 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -540,6 +540,7 @@ config MACH_ICONTROL config ARCH_PXA_ESERIES bool "PXA based Toshiba e-series PDAs" select PXA25x + select FB_W100 config MACH_E330 bool "Toshiba e330" From 823a2df258627b80df2e75056b850424a8eb5fed Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Wed, 29 Dec 2010 09:06:26 +0200 Subject: [PATCH 56/66] ARM: it8152: add IT8152_LAST_IRQ definition to fix build error The commit 6ac6b817f3f4c23c5febd960d8deb343e13af5f3 (ARM: pxa: encode IRQ number into .nr_irqs) removed definition of ITE_LAST_IRQ which caused the following build error: CC arch/arm/common/it8152.o arch/arm/common/it8152.c: In function 'it8152_init_irq': arch/arm/common/it8152.c:86: error: 'IT8152_LAST_IRQ' undeclared (first use in this function) arch/arm/common/it8152.c:86: error: (Each undeclared identifier is reported only once arch/arm/common/it8152.c:86: error: for each function it appears in.) make[2]: *** [arch/arm/common/it8152.o] Error 1 Defining the IT8152_LAST_IRQ in the arch/arm/include/hardware/it8152.c fixes the build. Signed-off-by: Mike Rapoport Signed-off-by: Eric Miao --- arch/arm/include/asm/hardware/it8152.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h index 21fa272301f8..b2f95c72287c 100644 --- a/arch/arm/include/asm/hardware/it8152.h +++ b/arch/arm/include/asm/hardware/it8152.h @@ -76,6 +76,7 @@ extern unsigned long it8152_base_address; IT8152_PD_IRQ(0) Audio controller (ACR) */ #define IT8152_IRQ(x) (IRQ_BOARD_START + (x)) +#define IT8152_LAST_IRQ (IRQ_BOARD_START + 40) /* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */ #define IT8152_LD_IRQ_COUNT 9 From 24c78557741395e038e83f25367cf2bfd7f582b8 Mon Sep 17 00:00:00 2001 From: "Aric D. Blumer" Date: Wed, 29 Dec 2010 11:18:29 -0500 Subject: [PATCH 57/66] ARM: pxa: fix page table corruption on resume Before this patch, the following error would sometimes occur after a resume on pxa3xx: /path/to/mm/memory.c:144: bad pmd 8040542e. The problem was that a temporary page table mapping was being improperly restored. The PXA3xx resume code creates a temporary mapping of resume_turn_on_mmu to avoid a prefetch abort. The pxa3xx_resume_after_mmu code requires that the r1 register holding the address of this mapping not be modified, however, resume_turn_on_mmu does modify it. It is mostly correct in that r1 receives the base table address, but it may also get other bits in 13:0. This results in pxa3xx_resume_after_mmu restoring the original mapping to the wrong place, corrupting memory and leaving the temporary mapping in place. Signed-off-by: Matt Reimer Signed-off-by: Eric Miao --- arch/arm/mach-pxa/sleep.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index 52c30b01a671..ae008110db4e 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -353,8 +353,8 @@ resume_turn_on_mmu: @ Let us ensure we jump to resume_after_mmu only when the mcr above @ actually took effect. They call it the "cpwait" operation. - mrc p15, 0, r1, c2, c0, 0 @ queue a dependency on CP15 - sub pc, r2, r1, lsr #32 @ jump to virtual addr + mrc p15, 0, r0, c2, c0, 0 @ queue a dependency on CP15 + sub pc, r2, r0, lsr #32 @ jump to virtual addr nop nop nop From 2f32c867219734b06abc980d4812f67b6d6fe517 Mon Sep 17 00:00:00 2001 From: "J. K. Cliburn" Date: Sat, 1 Jan 2011 05:02:12 +0000 Subject: [PATCH 58/66] atl1: fix oops when changing tx/rx ring params MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 3f5a2a713aad28480d86b0add00c68484b54febc zeroes out the statistics message block (SMB) and coalescing message block (CMB) when adapter ring resources are freed. This is desirable behavior, but, as a side effect, the commit leads to an oops when atl1_set_ringparam() attempts to alter the number of rx or tx elements in the ring buffer (by using ethtool -G, for example). We don't want SMB or CMB to change during this operation. Modify atl1_set_ringparam() to preserve SMB and CMB when changing ring parameters. Cc: stable@kernel.org Signed-off-by: Jay Cliburn Reported-by: Tõnu Raitviir Signed-off-by: David S. Miller --- drivers/net/atlx/atl1.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 53363108994e..3acf5123a6ef 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -3504,6 +3504,8 @@ static int atl1_set_ringparam(struct net_device *netdev, struct atl1_rfd_ring rfd_old, rfd_new; struct atl1_rrd_ring rrd_old, rrd_new; struct atl1_ring_header rhdr_old, rhdr_new; + struct atl1_smb smb; + struct atl1_cmb cmb; int err; tpd_old = adapter->tpd_ring; @@ -3544,11 +3546,19 @@ static int atl1_set_ringparam(struct net_device *netdev, adapter->rrd_ring = rrd_old; adapter->tpd_ring = tpd_old; adapter->ring_header = rhdr_old; + /* + * Save SMB and CMB, since atl1_free_ring_resources + * will clear them. + */ + smb = adapter->smb; + cmb = adapter->cmb; atl1_free_ring_resources(adapter); adapter->rfd_ring = rfd_new; adapter->rrd_ring = rrd_new; adapter->tpd_ring = tpd_new; adapter->ring_header = rhdr_new; + adapter->smb = smb; + adapter->cmb = cmb; err = atl1_up(adapter); if (err) From 9d89081d698132b5f964aea88112f76492563ee9 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 3 Jan 2011 11:26:08 -0800 Subject: [PATCH 59/66] bridge: fix br_multicast_ipv6_rcv for paged skbs use pskb_may_pull to access ipv6 header correctly for paged skbs It was omitted in the bridge code leading to crash in blind __skb_pull since the skb is cloned undonditionally we also simplify the the exit path this fixes bug https://bugzilla.kernel.org/show_bug.cgi?id=25202 Dec 15 14:36:40 User-PC hostapd: wlan0: STA 00:15:00:60:5d:34 IEEE 802.11: authenticated Dec 15 14:36:40 User-PC hostapd: wlan0: STA 00:15:00:60:5d:34 IEEE 802.11: associated (aid 2) Dec 15 14:36:40 User-PC hostapd: wlan0: STA 00:15:00:60:5d:34 RADIUS: starting accounting session 4D0608A3-00000005 Dec 15 14:36:41 User-PC kernel: [175576.120287] ------------[ cut here ]------------ Dec 15 14:36:41 User-PC kernel: [175576.120452] kernel BUG at include/linux/skbuff.h:1178! Dec 15 14:36:41 User-PC kernel: [175576.120609] invalid opcode: 0000 [#1] SMP Dec 15 14:36:41 User-PC kernel: [175576.120749] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/uevent Dec 15 14:36:41 User-PC kernel: [175576.121035] Modules linked in: approvals binfmt_misc bridge stp llc parport_pc ppdev arc4 iwlagn snd_hda_codec_realtek iwlcore i915 snd_hda_intel mac80211 joydev snd_hda_codec snd_hwdep snd_pcm snd_seq_midi drm_kms_helper snd_rawmidi drm snd_seq_midi_event snd_seq snd_timer snd_seq_device cfg80211 eeepc_wmi usbhid psmouse intel_agp i2c_algo_bit intel_gtt uvcvideo agpgart videodev sparse_keymap snd shpchp v4l1_compat lp hid video serio_raw soundcore output snd_page_alloc ahci libahci atl1c Dec 15 14:36:41 User-PC kernel: [175576.122712] Dec 15 14:36:41 User-PC kernel: [175576.122769] Pid: 0, comm: kworker/0:0 Tainted: G W 2.6.37-rc5-wl+ #3 1015PE/1016P Dec 15 14:36:41 User-PC kernel: [175576.123012] EIP: 0060:[] EFLAGS: 00010283 CPU: 1 Dec 15 14:36:41 User-PC kernel: [175576.123193] EIP is at br_multicast_rcv+0xc95/0xe1c [bridge] Dec 15 14:36:41 User-PC kernel: [175576.123362] EAX: 0000001c EBX: f5626318 ECX: 00000000 EDX: 00000000 Dec 15 14:36:41 User-PC kernel: [175576.123550] ESI: ec512262 EDI: f5626180 EBP: f60b5ca0 ESP: f60b5bd8 Dec 15 14:36:41 User-PC kernel: [175576.123737] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Dec 15 14:36:41 User-PC kernel: [175576.123902] Process kworker/0:0 (pid: 0, ti=f60b4000 task=f60a8000 task.ti=f60b0000) Dec 15 14:36:41 User-PC kernel: [175576.124137] Stack: Dec 15 14:36:41 User-PC kernel: [175576.124181] ec556500 f6d06800 f60b5be8 c01087d8 ec512262 00000030 00000024 f5626180 Dec 15 14:36:41 User-PC kernel: [175576.124181] f572c200 ef463440 f5626300 3affffff f6d06dd0 e60766a4 000000c4 f6d06860 Dec 15 14:36:41 User-PC kernel: [175576.124181] ffffffff ec55652c 00000001 f6d06844 f60b5c64 c0138264 c016e451 c013e47d Dec 15 14:36:41 User-PC kernel: [175576.124181] Call Trace: Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? sched_clock+0x8/0x10 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? enqueue_entity+0x174/0x440 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? sched_clock_cpu+0x131/0x190 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? select_task_rq_fair+0x2ad/0x730 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? nf_iterate+0x71/0x90 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? br_handle_frame_finish+0x184/0x220 [bridge] Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? br_handle_frame_finish+0x0/0x220 [bridge] Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? br_handle_frame+0x189/0x230 [bridge] Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? br_handle_frame_finish+0x0/0x220 [bridge] Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? br_handle_frame+0x0/0x230 [bridge] Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? __netif_receive_skb+0x1b6/0x5b0 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? skb_copy_bits+0x110/0x210 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? netif_receive_skb+0x6f/0x80 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? ieee80211_deliver_skb+0x8c/0x1a0 [mac80211] Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? ieee80211_rx_handlers+0xeb6/0x1aa0 [mac80211] Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? __netif_receive_skb+0x380/0x5b0 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? sched_clock_local+0xb2/0x190 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? default_spin_lock_flags+0x8/0x10 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? _raw_spin_lock_irqsave+0x2f/0x50 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? ieee80211_prepare_and_rx_handle+0x201/0xa90 [mac80211] Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? ieee80211_rx+0x2a4/0x830 [mac80211] Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? iwl_update_stats+0xa6/0x2a0 [iwlcore] Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? iwlagn_rx_reply_rx+0x292/0x3b0 [iwlagn] Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? _raw_spin_lock_irqsave+0x2f/0x50 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? iwl_rx_handle+0xe7/0x350 [iwlagn] Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? iwl_irq_tasklet+0xf7/0x5c0 [iwlagn] Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? __rcu_process_callbacks+0x201/0x2d0 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? tasklet_action+0xc5/0x100 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? __do_softirq+0x97/0x1d0 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? nmi_stack_correct+0x2f/0x34 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? __do_softirq+0x0/0x1d0 Dec 15 14:36:41 User-PC kernel: [175576.124181] Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? irq_exit+0x65/0x70 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? do_IRQ+0x52/0xc0 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? common_interrupt+0x30/0x38 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? intel_idle+0xc2/0x160 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? cpuidle_idle_call+0x6b/0x100 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? cpu_idle+0x8a/0xf0 Dec 15 14:36:41 User-PC kernel: [175576.124181] [] ? start_secondary+0x1e8/0x1ee Cc: David Miller Cc: Johannes Berg Cc: Stephen Hemminger Signed-off-by: Tomas Winkler Signed-off-by: David S. Miller --- net/bridge/br_multicast.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index f19e347f56f6..543b3262d002 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -1430,7 +1430,7 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br, struct net_bridge_port *port, struct sk_buff *skb) { - struct sk_buff *skb2 = skb; + struct sk_buff *skb2; struct ipv6hdr *ip6h; struct icmp6hdr *icmp6h; u8 nexthdr; @@ -1469,15 +1469,15 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br, if (!skb2) return -ENOMEM; + err = -EINVAL; + if (!pskb_may_pull(skb2, offset + sizeof(struct icmp6hdr))) + goto out; + len -= offset - skb_network_offset(skb2); __skb_pull(skb2, offset); skb_reset_transport_header(skb2); - err = -EINVAL; - if (!pskb_may_pull(skb2, sizeof(*icmp6h))) - goto out; - icmp6h = icmp6_hdr(skb2); switch (icmp6h->icmp6_type) { @@ -1516,7 +1516,12 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br, switch (icmp6h->icmp6_type) { case ICMPV6_MGM_REPORT: { - struct mld_msg *mld = (struct mld_msg *)icmp6h; + struct mld_msg *mld; + if (!pskb_may_pull(skb2, sizeof(*mld))) { + err = -EINVAL; + goto out; + } + mld = (struct mld_msg *)skb_transport_header(skb2); BR_INPUT_SKB_CB(skb2)->mrouters_only = 1; err = br_ip6_multicast_add_group(br, port, &mld->mld_mca); break; @@ -1529,15 +1534,18 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br, break; case ICMPV6_MGM_REDUCTION: { - struct mld_msg *mld = (struct mld_msg *)icmp6h; + struct mld_msg *mld; + if (!pskb_may_pull(skb2, sizeof(*mld))) { + err = -EINVAL; + goto out; + } + mld = (struct mld_msg *)skb_transport_header(skb2); br_ip6_multicast_leave_group(br, port, &mld->mld_mca); } } out: - __skb_push(skb2, offset); - if (skb2 != skb) - kfree_skb(skb2); + kfree_skb(skb2); return err; } #endif From a1cf11d8f673a3ad91012c5da96beed06ecefde1 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 3 Jan 2011 15:07:02 +0000 Subject: [PATCH 60/66] name_to_dev_t() must not call __init code The function can't be __init itself (being called from some sysfs handler), and hence none of the functions it calls can be either. Signed-off-by: Jan Beulich Acked-by: Randy Dunlap Signed-off-by: Linus Torvalds --- init/do_mounts.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/init/do_mounts.c b/init/do_mounts.c index 830aaec9c7d5..2b54bef33b55 100644 --- a/init/do_mounts.c +++ b/init/do_mounts.c @@ -93,7 +93,7 @@ no_match: * * Returns the matching dev_t on success or 0 on failure. */ -static dev_t __init devt_from_partuuid(char *uuid_str) +static dev_t devt_from_partuuid(char *uuid_str) { dev_t res = 0; struct device *dev = NULL; From e6f26129ebbb0071016e2526036f42036ccf30e1 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Mon, 3 Jan 2011 04:16:28 +0000 Subject: [PATCH 61/66] bridge: stp: ensure mac header is set commit bf9ae5386bca8836c16e69ab8fdbe46767d7452a (llc: use dev_hard_header) removed the skb_reset_mac_header call from llc_mac_hdr_init. This seems fine itself, but br_send_bpdu() invokes ebtables LOCAL_OUT. We oops in ebt_basic_match() because it assumes eth_hdr(skb) returns a meaningful result. Cc: acme@ghostprotocols.net References: https://bugzilla.kernel.org/show_bug.cgi?id=24532 Signed-off-by: Florian Westphal Signed-off-by: David S. Miller --- net/bridge/br_stp_bpdu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/bridge/br_stp_bpdu.c b/net/bridge/br_stp_bpdu.c index 35cf27087b56..e3d7aefa9181 100644 --- a/net/bridge/br_stp_bpdu.c +++ b/net/bridge/br_stp_bpdu.c @@ -50,6 +50,8 @@ static void br_send_bpdu(struct net_bridge_port *p, llc_mac_hdr_init(skb, p->dev->dev_addr, p->br->group_addr); + skb_reset_mac_header(skb); + NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev, dev_queue_xmit); } From 867c20265459d30a01b021a9c1e81fb4c5832aa9 Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Mon, 3 Jan 2011 14:59:10 -0800 Subject: [PATCH 62/66] ima: fix add LSM rule bug If security_filter_rule_init() doesn't return a rule, then not everything is as fine as the return code implies. This bug only occurs when the LSM (eg. SELinux) is disabled at runtime. Adding an empty LSM rule causes ima_match_rules() to always succeed, ignoring any remaining rules. default IMA TCB policy: # PROC_SUPER_MAGIC dont_measure fsmagic=0x9fa0 # SYSFS_MAGIC dont_measure fsmagic=0x62656572 # DEBUGFS_MAGIC dont_measure fsmagic=0x64626720 # TMPFS_MAGIC dont_measure fsmagic=0x01021994 # SECURITYFS_MAGIC dont_measure fsmagic=0x73636673 < LSM specific rule > dont_measure obj_type=var_log_t measure func=BPRM_CHECK measure func=FILE_MMAP mask=MAY_EXEC measure func=FILE_CHECK mask=MAY_READ uid=0 Thus without the patch, with the boot parameters 'tcb selinux=0', adding the above 'dont_measure obj_type=var_log_t' rule to the default IMA TCB measurement policy, would result in nothing being measured. The patch prevents the default TCB policy from being replaced. Signed-off-by: Mimi Zohar Cc: James Morris Acked-by: Serge Hallyn Cc: David Safford Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- security/integrity/ima/ima_policy.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/security/integrity/ima/ima_policy.c b/security/integrity/ima/ima_policy.c index aef8c0a923ab..d661afbe474c 100644 --- a/security/integrity/ima/ima_policy.c +++ b/security/integrity/ima/ima_policy.c @@ -253,6 +253,8 @@ static int ima_lsm_rule_init(struct ima_measure_rule_entry *entry, result = security_filter_rule_init(entry->lsm[lsm_rule].type, Audit_equal, args, &entry->lsm[lsm_rule].rule); + if (!entry->lsm[lsm_rule].rule) + return -EINVAL; return result; } From d9a1abe4844e7591cd82e167a1a09e6546f6c45e Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 3 Jan 2011 14:59:11 -0800 Subject: [PATCH 63/66] arch/mn10300/kernel/irq.c: fix build Addresses https://bugzilla.kernel.org/show_bug.cgi?id=25702 Reported-by: Martin Ettl Cc: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c index c2e44597c22b..ac11754ecec5 100644 --- a/arch/mn10300/kernel/irq.c +++ b/arch/mn10300/kernel/irq.c @@ -459,7 +459,7 @@ void migrate_irqs(void) tmp = CROSS_GxICR(irq, new); x &= GxICR_LEVEL | GxICR_ENABLE; - if (GxICR(irq) & GxICR_REQUEST) { + if (GxICR(irq) & GxICR_REQUEST) x |= GxICR_REQUEST | GxICR_DETECT; CROSS_GxICR(irq, new) = x; tmp = CROSS_GxICR(irq, new); From 8a87694ed159d7abd2c9ed657416696c05db2252 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 4 Jan 2011 07:14:24 +0100 Subject: [PATCH 64/66] remove trim_fs method from Documentation/filesystems/Locking The ->trim_fs has been removed meanwhile, so remove it from the documentation as well. Signed-off-by: Christoph Hellwig Reported-by: Ryusuke Konishi Signed-off-by: Linus Torvalds --- Documentation/filesystems/Locking | 2 -- 1 file changed, 2 deletions(-) diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 7686e7684495..33fa3e5d38fd 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -115,7 +115,6 @@ prototypes: ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t); ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t); int (*bdev_try_to_free_page)(struct super_block*, struct page*, gfp_t); - int (*trim_fs) (struct super_block *, struct fstrim_range *); locking rules: All may block [not true, see below] @@ -138,7 +137,6 @@ show_options: no (namespace_sem) quota_read: no (see below) quota_write: no (see below) bdev_try_to_free_page: no (see below) -trim_fs: no ->statfs() has s_umount (shared) when called by ustat(2) (native or compat), but that's an accident of bad API; s_umount is used to pin From 9fc3bbb4a752f108cf096d96640f3b548bbbce6c Mon Sep 17 00:00:00 2001 From: Joel Sing Date: Mon, 3 Jan 2011 20:24:20 +0000 Subject: [PATCH 65/66] ipv4/route.c: respect prefsrc for local routes The preferred source address is currently ignored for local routes, which results in all local connections having a src address that is the same as the local dst address. Fix this by respecting the preferred source address when it is provided for local routes. This bug can be demonstrated as follows: # ifconfig dummy0 192.168.0.1 # ip route show table local | grep local.*dummy0 local 192.168.0.1 dev dummy0 proto kernel scope host src 192.168.0.1 # ip route change table local local 192.168.0.1 dev dummy0 \ proto kernel scope host src 127.0.0.1 # ip route show table local | grep local.*dummy0 local 192.168.0.1 dev dummy0 proto kernel scope host src 127.0.0.1 We now establish a local connection and verify the source IP address selection: # nc -l 192.168.0.1 3128 & # nc 192.168.0.1 3128 & # netstat -ant | grep 192.168.0.1:3128.*EST tcp 0 0 192.168.0.1:3128 192.168.0.1:33228 ESTABLISHED tcp 0 0 192.168.0.1:33228 192.168.0.1:3128 ESTABLISHED Signed-off-by: Joel Sing Signed-off-by: David S. Miller --- net/ipv4/route.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index df948b0f1ac9..93bfd95584f4 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -2649,8 +2649,12 @@ static int ip_route_output_slow(struct net *net, struct rtable **rp, } if (res.type == RTN_LOCAL) { - if (!fl.fl4_src) - fl.fl4_src = fl.fl4_dst; + if (!fl.fl4_src) { + if (res.fi->fib_prefsrc) + fl.fl4_src = res.fi->fib_prefsrc; + else + fl.fl4_src = fl.fl4_dst; + } dev_out = net->loopback_dev; fl.oif = dev_out->ifindex; res.fi = NULL; From 3c0eee3fe6a3a1c745379547c7e7c904aa64f6d5 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 4 Jan 2011 16:50:19 -0800 Subject: [PATCH 66/66] Linux 2.6.37 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index e7c41f1344e5..74b25559f831 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 37 -EXTRAVERSION = -rc8 +EXTRAVERSION = NAME = Flesh-Eating Bats with Fangs # *DOCUMENTATION*