regmap: Updates for v4.8

Several small updates and API enhancements:
 
  - Provide transparent unrolling of bulk writes into individual writes
    so they can be used with devices without raw formatting.
  - Fix compatibility between I2C controllers supporting block commands
    and devices with more than 8 bit wide registers.
  - Add some helpers for iopoll-like functionality and workarounds for
    weird interrupt controllers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXljTLAAoJECTWi3JdVIfQMSMH/1MRirJkwIds0SRbWcnG9hOe
 nMfUhkuFuCZJN82GwOh7YbAxLB1pGXKsGZq1XGMYFvwJawEizR3o83fgcRy1LQmG
 KOQHO1O/CWQqRo1ntGl33H2thhq6e67y6lpeMBhdMvp3VjqdyzlILNSva6iWbW/R
 N0iFSSKd4VdHlg/o+R3k7EzWCLZ4FZI7B9/5OjxWkoUR+tloNI8rR8Ecwl6+Q37K
 8+yo6R0Ntx/JXB7JvA5Y8vqPdUGi68+XpcnaAcpM5DaL95+lqzduWCjKfjG5oatZ
 3o/ORRVi+WyD95/NLXwKFMvSDSGokVDrU87HNgKph+f4sNF5TIoC/E+JhPUQBSU=
 =7BlM
 -----END PGP SIGNATURE-----

Merge tag 'regmap-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap updates from Mark Brown:
 "Several small updates and API enhancements:

   - provide transparent unrolling of bulk writes into individual writes
     so they can be used with devices without raw formatting.

   - fix compatibility between I2C controllers supporting block commands
     and devices with more than 8 bit wide registers.

   - add some helpers for iopoll-like functionality and workarounds for
     weird interrupt controllers"

* tag 'regmap-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: add iopoll-like polling macro
  regmap: Support bulk writes for devices without raw formatting
  regmap-i2c: Use i2c block command only if register value width is 8 bit
  regmap: irq: Add support to call client specific pre/post interrupt service
  regmap: Add file patterns for regmap device tree bindings
This commit is contained in:
Linus Torvalds 2016-07-26 19:24:33 -07:00
commit ae9799975c
5 changed files with 90 additions and 8 deletions

View File

@ -9691,6 +9691,7 @@ M: Mark Brown <broonie@kernel.org>
L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git
S: Supported
F: Documentation/devicetree/bindings/regmap/
F: drivers/base/regmap/
F: include/linux/regmap.h

View File

@ -259,7 +259,7 @@ static const struct regmap_bus *regmap_get_i2c_bus(struct i2c_client *i2c,
{
if (i2c_check_functionality(i2c->adapter, I2C_FUNC_I2C))
return &regmap_i2c;
else if (config->reg_bits == 8 &&
else if (config->val_bits == 8 && config->reg_bits == 8 &&
i2c_check_functionality(i2c->adapter,
I2C_FUNC_SMBUS_I2C_BLOCK))
return &regmap_i2c_smbus_i2c_block;

View File

@ -268,13 +268,16 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
bool handled = false;
u32 reg;
if (chip->handle_pre_irq)
chip->handle_pre_irq(chip->irq_drv_data);
if (chip->runtime_pm) {
ret = pm_runtime_get_sync(map->dev);
if (ret < 0) {
dev_err(map->dev, "IRQ thread failed to resume: %d\n",
ret);
pm_runtime_put(map->dev);
return IRQ_NONE;
goto exit;
}
}
@ -296,7 +299,7 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
if (ret != 0) {
dev_err(map->dev, "Failed to read IRQ status: %d\n",
ret);
return IRQ_NONE;
goto exit;
}
for (i = 0; i < data->chip->num_regs; i++) {
@ -312,7 +315,7 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
break;
default:
BUG();
return IRQ_NONE;
goto exit;
}
}
@ -329,7 +332,7 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
ret);
if (chip->runtime_pm)
pm_runtime_put(map->dev);
return IRQ_NONE;
goto exit;
}
}
}
@ -365,6 +368,10 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
if (chip->runtime_pm)
pm_runtime_put(map->dev);
exit:
if (chip->handle_post_irq)
chip->handle_post_irq(chip->irq_drv_data);
if (handled)
return IRQ_HANDLED;
else

View File

@ -1777,8 +1777,6 @@ int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val,
size_t val_bytes = map->format.val_bytes;
size_t total_size = val_bytes * val_count;
if (map->bus && !map->format.parse_inplace)
return -EINVAL;
if (!IS_ALIGNED(reg, map->reg_stride))
return -EINVAL;
@ -1789,7 +1787,8 @@ int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val,
*
* The first if block is used for memory mapped io. It does not allow
* val_bytes of 3 for example.
* The second one is used for busses which do not have this limitation
* The second one is for busses that do not provide raw I/O.
* The third one is used for busses which do not have these limitations
* and can write arbitrary value lengths.
*/
if (!map->bus) {
@ -1825,6 +1824,32 @@ int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val,
}
out:
map->unlock(map->lock_arg);
} else if (map->bus && !map->format.parse_inplace) {
const u8 *u8 = val;
const u16 *u16 = val;
const u32 *u32 = val;
unsigned int ival;
for (i = 0; i < val_count; i++) {
switch (map->format.val_bytes) {
case 4:
ival = u32[i];
break;
case 2:
ival = u16[i];
break;
case 1:
ival = u8[i];
break;
default:
return -EINVAL;
}
ret = regmap_write(map, reg + (i * map->reg_stride),
ival);
if (ret)
return ret;
}
} else if (map->use_single_write ||
(map->max_raw_write && map->max_raw_write < total_size)) {
int chunk_stride = map->reg_stride;

View File

@ -95,6 +95,45 @@ struct reg_sequence {
#define regmap_fields_force_update_bits(field, id, mask, val) \
regmap_fields_update_bits_base(field, id, mask, val, NULL, false, true)
/**
* regmap_read_poll_timeout - Poll until a condition is met or a timeout occurs
* @map: Regmap to read from
* @addr: Address to poll
* @val: Unsigned integer variable to read the value into
* @cond: Break condition (usually involving @val)
* @sleep_us: Maximum time to sleep between reads in us (0
* tight-loops). Should be less than ~20ms since usleep_range
* is used (see Documentation/timers/timers-howto.txt).
* @timeout_us: Timeout in us, 0 means never timeout
*
* Returns 0 on success and -ETIMEDOUT upon a timeout or the regmap_read
* error return value in case of a error read. In the two former cases,
* the last read value at @addr is stored in @val. Must not be called
* from atomic context if sleep_us or timeout_us are used.
*
* This is modelled after the readx_poll_timeout macros in linux/iopoll.h.
*/
#define regmap_read_poll_timeout(map, addr, val, cond, sleep_us, timeout_us) \
({ \
ktime_t timeout = ktime_add_us(ktime_get(), timeout_us); \
int ret; \
might_sleep_if(sleep_us); \
for (;;) { \
ret = regmap_read((map), (addr), &(val)); \
if (ret) \
break; \
if (cond) \
break; \
if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) { \
ret = regmap_read((map), (addr), &(val)); \
break; \
} \
if (sleep_us) \
usleep_range((sleep_us >> 2) + 1, sleep_us); \
} \
ret ?: ((cond) ? 0 : -ETIMEDOUT); \
})
#ifdef CONFIG_REGMAP
enum regmap_endian {
@ -851,6 +890,12 @@ struct regmap_irq {
* @num_type_reg: Number of type registers.
* @type_reg_stride: Stride to use for chips where type registers are not
* contiguous.
* @handle_pre_irq: Driver specific callback to handle interrupt from device
* before regmap_irq_handler process the interrupts.
* @handle_post_irq: Driver specific callback to handle interrupt from device
* after handling the interrupts in regmap_irq_handler().
* @irq_drv_data: Driver specific IRQ data which is passed as parameter when
* driver specific pre/post interrupt handler is called.
*/
struct regmap_irq_chip {
const char *name;
@ -877,6 +922,10 @@ struct regmap_irq_chip {
int num_type_reg;
unsigned int type_reg_stride;
int (*handle_pre_irq)(void *irq_drv_data);
int (*handle_post_irq)(void *irq_drv_data);
void *irq_drv_data;
};
struct regmap_irq_chip_data;