Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-24 05:02:12 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'jejb-scsi' into misc

Browse Source
This commit is contained in:
James Bottomley 2016-01-07 15:51:13 -08:00
commit abaee091a1
822 changed files with 11545 additions and 5928 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
Documentation/IPMI.txt
View File

@ -587,7 +587,7 @@ used to control it:
modprobe ipmi_watchdog timeout=<t> pretimeout=<t> action=<action type>
preaction=<preaction type> preop=<preop type> start_now=x
nowayout=x ifnum_to_use=n
nowayout=x ifnum_to_use=n panic_wdt_timeout=<t>
ifnum_to_use specifies which interface the watchdog timer should use.
The default is -1, which means to pick the first one registered.
@ -597,7 +597,9 @@ is the amount of seconds before the reset that the pre-timeout panic will
occur (if pretimeout is zero, then pretimeout will not be enabled). Note
that the pretimeout is the time before the final timeout. So if the
timeout is 50 seconds and the pretimeout is 10 seconds, then the pretimeout
will occur in 40 second (10 seconds before the timeout).
will occur in 40 second (10 seconds before the timeout). The panic_wdt_timeout
is the value of timeout which is set on kernel panic, in order to let actions
such as kdump to occur during panic.
The action may be "reset", "power_cycle", or "power_off", and
specifies what to do when the timer times out, and defaults to
@ -634,6 +636,7 @@ for configuring the watchdog:
ipmi_watchdog.preop=<preop type>
ipmi_watchdog.start_now=x
ipmi_watchdog.nowayout=x
ipmi_watchdog.panic_wdt_timeout=<t>
The options are the same as the module parameter options.

18
Documentation/arm/keystone/Overview.txt
View File

@ -49,24 +49,6 @@ specified through DTS. Following are the DTS used:-
The device tree documentation for the keystone machines are located at
Documentation/devicetree/bindings/arm/keystone/keystone.txt
Known issues & workaround
-------------------------
Some of the device drivers used on keystone are re-used from that from
DaVinci and other TI SoCs. These device drivers may use clock APIs directly.
Some of the keystone specific drivers such as netcp uses run time power
management API instead to enable clock. As this API has limitations on
keystone, following workaround is needed to boot Linux.
Add 'clk_ignore_unused' to the bootargs env variable in u-boot. Otherwise
clock frameworks will try to disable clocks that are unused and disable
the hardware. This is because netcp related power domain and clock
domains are enabled in u-boot as run time power management API currently
doesn't enable clocks for netcp due to a limitation. This workaround is
expected to be removed in the future when proper API support becomes
available. Until then, this work around is needed.
Document Author
---------------
Murali Karicheri <m-karicheri2@ti.com>

3
Documentation/block/null_blk.txt
View File

@ -70,3 +70,6 @@ use_per_node_hctx=[0/1]: Default: 0
parameter.
1: The multi-queue block layer is instantiated with a hardware dispatch
queue for each CPU node in the system.
use_lightnvm=[0/1]: Default: 0
Register device with LightNVM. Requires blk-mq to be used.

6
Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
View File

@ -8,6 +8,11 @@ Required properties:
- phy-mode: See ethernet.txt file in the same directory
- clocks: a pointer to the reference clock for this device.
Optional properties:
- tx-csum-limit: maximum mtu supported by port that allow TX checksum.
Value is presented in bytes. If not used, by default 1600B is set for
"marvell,armada-370-neta" and 9800B for others.
Example:
ethernet@d0070000 {
@ -15,6 +20,7 @@ ethernet@d0070000 {
reg = <0xd0070000 0x2500>;
interrupts = <8>;
clocks = <&gate_clk 4>;
tx-csum-limit = <9800>
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";

4
Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
View File

@ -1,7 +1,9 @@
* Temperature Sensor ADC (TSADC) on rockchip SoCs
Required properties:
- compatible : "rockchip,rk3288-tsadc"
- compatible : should be "rockchip,<name>-tsadc"
"rockchip,rk3288-tsadc": found on RK3288 SoCs
"rockchip,rk3368-tsadc": found on RK3368 SoCs
- reg : physical base address of the controller and length of memory mapped
region.
- interrupts : The interrupt number to the cpu. The interrupt specifier format

1
Documentation/i2c/busses/i2c-i801
View File

@ -32,6 +32,7 @@ Supported adapters:
* Intel Sunrise Point-LP (PCH)
* Intel DNV (SOC)
* Intel Broxton (SOC)
* Intel Lewisburg (PCH)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller

3
Documentation/kernel-parameters.txt
View File

@ -1583,9 +1583,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
hwp_only
Only load intel_pstate on systems which support
hardware P state control (HWP) if available.
no_acpi
Don't use ACPI processor performance control objects
_PSS and _PPC specified limits.
intremap= [X86-64, Intel-IOMMU]
on enable Interrupt Remapping (default)

37
MAINTAINERS
View File

@ -318,7 +318,7 @@ M: Zhang Rui <rui.zhang@intel.com>
L: linux-acpi@vger.kernel.org
W: https://01.org/linux-acpi
S: Supported
F: drivers/acpi/video.c
F: drivers/acpi/acpi_video.c
ACPI WMI DRIVER
L: platform-driver-x86@vger.kernel.org
@ -1847,7 +1847,7 @@ S: Supported
F: drivers/net/wireless/ath/ath6kl/
WILOCITY WIL6210 WIRELESS DRIVER
M: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
M: Maya Erez <qca_merez@qca.qualcomm.com>
L: linux-wireless@vger.kernel.org
L: wil6210@qca.qualcomm.com
S: Supported
@ -1931,7 +1931,7 @@ S: Supported
F: drivers/i2c/busses/i2c-at91.c
ATMEL ISI DRIVER
M: Josh Wu <josh.wu@atmel.com>
M: Ludovic Desroches <ludovic.desroches@atmel.com>
L: linux-media@vger.kernel.org
S: Supported
F: drivers/media/platform/soc_camera/atmel-isi.c
@ -1950,7 +1950,8 @@ S: Supported
F: drivers/net/ethernet/cadence/
ATMEL NAND DRIVER
M: Josh Wu <josh.wu@atmel.com>
M: Wenyou Yang <wenyou.yang@atmel.com>
M: Josh Wu <rainyfeeling@outlook.com>
L: linux-mtd@lists.infradead.org
S: Supported
F: drivers/mtd/nand/atmel_nand*
@ -2449,7 +2450,9 @@ F: drivers/firmware/broadcom/*
BROADCOM STB NAND FLASH DRIVER
M: Brian Norris <computersforpeace@gmail.com>
M: Kamal Dasu <kdasu.kdev@gmail.com>
L: linux-mtd@lists.infradead.org
L: bcm-kernel-feedback-list@broadcom.com
S: Maintained
F: drivers/mtd/nand/brcmnand/
@ -2929,10 +2932,9 @@ S: Maintained
F: drivers/platform/x86/compal-laptop.c
CONEXANT ACCESSRUNNER USB DRIVER
M: Simon Arlott <cxacru@fire.lp0.eu>
L: accessrunner-general@lists.sourceforge.net
W: http://accessrunner.sourceforge.net/
S: Maintained
S: Orphan
F: drivers/usb/atm/cxacru.c
CONFIGFS
@ -4409,6 +4411,7 @@ K: fmc_d.*register
FPGA MANAGER FRAMEWORK
M: Alan Tull <atull@opensource.altera.com>
R: Moritz Fischer <moritz.fischer@ettus.com>
S: Maintained
F: drivers/fpga/
F: include/linux/fpga/fpga-mgr.h
@ -6371,6 +6374,7 @@ F: arch/*/include/asm/pmem.h
LIGHTNVM PLATFORM SUPPORT
M: Matias Bjorling <mb@lightnvm.io>
W: http://github/OpenChannelSSD
L: linux-block@vger.kernel.org
S: Maintained
F: drivers/lightnvm/
F: include/linux/lightnvm.h
@ -7909,6 +7913,18 @@ S: Maintained
F: net/openvswitch/
F: include/uapi/linux/openvswitch.h
OPERATING PERFORMANCE POINTS (OPP)
M: Viresh Kumar <vireshk@kernel.org>
M: Nishanth Menon <nm@ti.com>
M: Stephen Boyd <sboyd@codeaurora.org>
L: linux-pm@vger.kernel.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git
F: drivers/base/power/opp/
F: include/linux/pm_opp.h
F: Documentation/power/opp.txt
F: Documentation/devicetree/bindings/opp/
OPL4 DRIVER
M: Clemens Ladisch <clemens@ladisch.de>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
@ -9322,7 +9338,6 @@ F: drivers/i2c/busses/i2c-designware-*
F: include/linux/platform_data/i2c-designware.h
SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER
M: Seungwon Jeon <tgih.jun@samsung.com>
M: Jaehoon Chung <jh80.chung@samsung.com>
L: linux-mmc@vger.kernel.org
S: Maintained
@ -9419,8 +9434,10 @@ F: include/scsi/sg.h
SCSI SUBSYSTEM
M: "James E.J. Bottomley" <JBottomley@odin.com>
L: linux-scsi@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git
M: "Martin K. Petersen" <martin.petersen@oracle.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/
F: include/scsi/
@ -10895,9 +10912,9 @@ S: Maintained
F: drivers/media/tuners/tua9001*
TULIP NETWORK DRIVERS
M: Grant Grundler <grundler@parisc-linux.org>
L: netdev@vger.kernel.org
S: Maintained
L: linux-parisc@vger.kernel.org
S: Orphan
F: drivers/net/ethernet/dec/tulip/
TUN/TAP driver

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 4
SUBLEVEL = 0
EXTRAVERSION = -rc1
EXTRAVERSION = -rc4
NAME = Blurry Fish Butt
# *DOCUMENTATION*

2
arch/arc/configs/axs101_defconfig
View File

@ -1,4 +1,4 @@
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
CONFIG_CROSS_COMPILE="arc-linux-"
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y

2
arch/arc/configs/axs103_defconfig
View File

@ -1,4 +1,4 @@
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
CONFIG_CROSS_COMPILE="arc-linux-"
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y

2
arch/arc/configs/axs103_smp_defconfig
View File

@ -1,4 +1,4 @@
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
CONFIG_CROSS_COMPILE="arc-linux-"
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y

2
arch/arc/configs/nsim_hs_defconfig
View File

@ -1,4 +1,4 @@
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
CONFIG_CROSS_COMPILE="arc-linux-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set

2
arch/arc/configs/nsim_hs_smp_defconfig
View File

@ -1,4 +1,4 @@
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
CONFIG_CROSS_COMPILE="arc-linux-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set

2
arch/arc/configs/nsimosci_hs_defconfig
View File

@ -1,4 +1,4 @@
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
CONFIG_CROSS_COMPILE="arc-linux-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set

2
arch/arc/configs/nsimosci_hs_smp_defconfig
View File

@ -1,4 +1,4 @@
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
CONFIG_CROSS_COMPILE="arc-linux-"
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y

2
arch/arc/configs/vdk_hs38_defconfig
View File

@ -1,4 +1,4 @@
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
CONFIG_CROSS_COMPILE="arc-linux-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_CROSS_MEMORY_ATTACH is not set

2
arch/arc/configs/vdk_hs38_smp_defconfig
View File

@ -1,4 +1,4 @@
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
CONFIG_CROSS_COMPILE="arc-linux-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_CROSS_MEMORY_ATTACH is not set

3
arch/arc/include/asm/irqflags-arcv2.h
View File

@ -37,6 +37,9 @@
#define ISA_INIT_STATUS_BITS (STATUS_IE_MASK | STATUS_AD_MASK | \
(ARCV2_IRQ_DEF_PRIO << 1))
/* SLEEP needs default irq priority (<=) which can interrupt the doze */
#define ISA_SLEEP_ARG (0x10 | ARCV2_IRQ_DEF_PRIO)
#ifndef __ASSEMBLY__
/*

2
arch/arc/include/asm/irqflags-compact.h
View File

@ -43,6 +43,8 @@
#define ISA_INIT_STATUS_BITS STATUS_IE_MASK
#define ISA_SLEEP_ARG 0x3
#ifndef __ASSEMBLY__
/******************************************************************

2
arch/arc/kernel/ctx_sw.c
View File

@ -58,8 +58,6 @@ __switch_to(struct task_struct *prev_task, struct task_struct *next_task)
"st sp, [r24] \n\t"
#endif
"sync \n\t"
/*
* setup _current_task with incoming tsk.
* optionally, set r25 to that as well

3
arch/arc/kernel/ctx_sw_asm.S
View File

@ -44,9 +44,6 @@ __switch_to:
* don't need to do anything special to return it
*/
/* hardware memory barrier */
sync
/*
* switch to new task, contained in r1
* Temp reg r3 is required to get the ptr to store val

9
arch/arc/kernel/process.c
View File

@ -44,11 +44,10 @@ SYSCALL_DEFINE0(arc_gettls)
void arch_cpu_idle(void)
{
/* sleep, but enable all interrupts before committing */
if (is_isa_arcompact()) {
__asm__("sleep 0x3");
} else {
__asm__("sleep 0x10");
}
__asm__ __volatile__(
"sleep %0 \n"
:
:"I"(ISA_SLEEP_ARG)); /* can't be "r" has to be embedded const */
}
asmlinkage void ret_from_fork(void);

37
arch/arc/kernel/unwind.c
View File

@ -986,42 +986,13 @@ int arc_unwind(struct unwind_frame_info *frame)
(const u8 *)(fde +
1) +
*fde, ptrType);
if (pc >= endLoc)
if (pc >= endLoc) {
fde = NULL;
} else
fde = NULL;
}
if (fde == NULL) {
for (fde = table->address, tableSize = table->size;
cie = NULL, tableSize > sizeof(*fde)
&& tableSize - sizeof(*fde) >= *fde;
tableSize -= sizeof(*fde) + *fde,
fde += 1 + *fde / sizeof(*fde)) {
cie = cie_for_fde(fde, table);
if (cie == &bad_cie) {
cie = NULL;
break;
}
if (cie == NULL
|| cie == &not_fde
|| (ptrType = fde_pointer_type(cie)) < 0)
continue;
ptr = (const u8 *)(fde + 2);
startLoc = read_pointer(&ptr,
(const u8 *)(fde + 1) +
*fde, ptrType);
if (!startLoc)
continue;
if (!(ptrType & DW_EH_PE_indirect))
ptrType &=
DW_EH_PE_FORM | DW_EH_PE_signed;
endLoc =
startLoc + read_pointer(&ptr,
(const u8 *)(fde +
1) +
*fde, ptrType);
if (pc >= startLoc && pc < endLoc)
break;
} else {
fde = NULL;
cie = NULL;
}
}
}

4
arch/arc/mm/tlb.c
View File

@ -619,10 +619,10 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
int dirty = !test_and_set_bit(PG_dc_clean, &page->flags);
if (dirty) {
/* wback + inv dcache lines */
/* wback + inv dcache lines (K-mapping) */
__flush_dcache_page(paddr, paddr);
/* invalidate any existing icache lines */
/* invalidate any existing icache lines (U-mapping) */
if (vma->vm_flags & VM_EXEC)
__inv_icache_page(paddr, vaddr);
}

4
arch/arm/Kconfig
View File

@ -76,6 +76,8 @@ config ARM
select IRQ_FORCED_THREADING
select MODULES_USE_ELF_REL
select NO_BOOTMEM
select OF_EARLY_FLATTREE if OF
select OF_RESERVED_MEM if OF
select OLD_SIGACTION
select OLD_SIGSUSPEND3
select PERF_USE_VMALLOC
@ -1822,8 +1824,6 @@ config USE_OF
bool "Flattened Device Tree support"
select IRQ_DOMAIN
select OF
select OF_EARLY_FLATTREE
select OF_RESERVED_MEM
help
Include support for flattened device tree machine descriptions.

1
arch/arm/boot/dts/am57xx-beagle-x15.dts
View File

@ -604,6 +604,7 @@
reg = <0x6f>;
interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
<&dra7_pmx_core 0x424>;
interrupt-names = "irq", "wakeup";
pinctrl-names = "default";
pinctrl-0 = <&mcp79410_pins_default>;

6
arch/arm/boot/dts/animeo_ip.dts
View File

@ -155,21 +155,21 @@
label = "keyswitch_in";
gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
linux,code = <28>;
gpio-key,wakeup;
wakeup-source;
};
error_in {
label = "error_in";
gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
linux,code = <29>;
gpio-key,wakeup;
wakeup-source;
};
btn {
label = "btn";
gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
linux,code = <31>;
gpio-key,wakeup;
wakeup-source;
};
};
};

1
arch/arm/boot/dts/armada-38x.dtsi
View File

@ -498,6 +498,7 @@
reg = <0x70000 0x4000>;
interrupts-extended = <&mpic 8>;
clocks = <&gateclk 4>;
tx-csum-limit = <9800>;
status = "disabled";
};

2
arch/arm/boot/dts/at91-foxg20.dts
View File

@ -159,7 +159,7 @@
label = "Button";
gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
gpio-key,wakeup;
wakeup-source;
};
};
};

13
arch/arm/boot/dts/at91-kizbox.dts
View File

@ -24,15 +24,6 @@
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
main_xtal {
clock-frequency = <18432000>;
};
@ -94,14 +85,14 @@
label = "PB_RST";
gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
gpio-key,wakeup;
wakeup-source;
};
user {
label = "PB_USER";
gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
linux,code = <0x101>;
gpio-key,wakeup;
wakeup-source;
};
};

6
arch/arm/boot/dts/at91-kizbox2.dts
View File

@ -171,21 +171,21 @@
label = "PB_PROG";
gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
linux,code = <0x102>;
gpio-key,wakeup;
wakeup-source;
};
reset {
label = "PB_RST";
gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
linux,code = <0x100>;
gpio-key,wakeup;
wakeup-source;
};
user {
label = "PB_USER";
gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
linux,code = <0x101>;
gpio-key,wakeup;
wakeup-source;
};
};

4
arch/arm/boot/dts/at91-kizboxmini.dts
View File

@ -98,14 +98,14 @@
label = "PB_PROG";
gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
linux,code = <0x102>;
gpio-key,wakeup;
wakeup-source;
};
reset {
label = "PB_RST";
gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
linux,code = <0x100>;
gpio-key,wakeup;
wakeup-source;
};
};

2
arch/arm/boot/dts/at91-qil_a9260.dts
View File

@ -183,7 +183,7 @@
label = "user_pb";
gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>;
gpio-key,wakeup;
wakeup-source;
};
};

115
arch/arm/boot/dts/at91-sama5d2_xplained.dts
View File

@ -45,6 +45,7 @@
/dts-v1/;
#include "sama5d2.dtsi"
#include "sama5d2-pinfunc.h"
#include <dt-bindings/mfd/atmel-flexcom.h>
/ {
model = "Atmel SAMA5D2 Xplained";
@ -59,15 +60,6 @@
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
slow_xtal {
clock-frequency = <32768>;
};
@ -91,6 +83,22 @@
status = "okay";
};
sdmmc0: sdio-host@a0000000 {
bus-width = <8>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc0_default>;
non-removable;
mmc-ddr-1_8v;
status = "okay";
};
sdmmc1: sdio-host@b0000000 {
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc1_default>;
status = "okay"; /* conflict with qspi0 */
};
apb {
spi0: spi@f8000000 {
pinctrl-names = "default";
@ -181,12 +189,49 @@
};
};
flx0: flexcom@f8034000 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
uart5: serial@200 {
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&flx0_clk>;
clock-names = "usart";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx0_default>;
atmel,fifo-size = <32>;
status = "okay";
};
};
uart3: serial@fc008000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3_default>;
status = "okay";
};
flx4: flexcom@fc018000 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
status = "okay";
i2c2: i2c@600 {
compatible = "atmel,sama5d2-i2c";
reg = <0x600 0x200>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <0>, <0>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&flx4_clk>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
atmel,fifo-size = <16>;
status = "okay";
};
};
i2c1: i2c@fc028000 {
dmas = <0>, <0>;
pinctrl-names = "default";
@ -201,6 +246,18 @@
};
pinctrl@fc038000 {
pinctrl_flx0_default: flx0_default {
pinmux = <PIN_PB28__FLEXCOM0_IO0>,
<PIN_PB29__FLEXCOM0_IO1>;
bias-disable;
};
pinctrl_flx4_default: flx4_default {
pinmux = <PIN_PD12__FLEXCOM4_IO0>,
<PIN_PD13__FLEXCOM4_IO1>;
bias-disable;
};
pinctrl_i2c0_default: i2c0_default {
pinmux = <PIN_PD21__TWD0>,
<PIN_PD22__TWCK0>;
@ -227,6 +284,46 @@
bias-disable;
};
pinctrl_sdmmc0_default: sdmmc0_default {
cmd_data {
pinmux = <PIN_PA1__SDMMC0_CMD>,
<PIN_PA2__SDMMC0_DAT0>,
<PIN_PA3__SDMMC0_DAT1>,
<PIN_PA4__SDMMC0_DAT2>,
<PIN_PA5__SDMMC0_DAT3>,
<PIN_PA6__SDMMC0_DAT4>,
<PIN_PA7__SDMMC0_DAT5>,
<PIN_PA8__SDMMC0_DAT6>,
<PIN_PA9__SDMMC0_DAT7>;
bias-pull-up;
};
ck_cd_rstn_vddsel {
pinmux = <PIN_PA0__SDMMC0_CK>,
<PIN_PA10__SDMMC0_RSTN>,
<PIN_PA11__SDMMC0_VDDSEL>,
<PIN_PA13__SDMMC0_CD>;
bias-disable;
};
};
pinctrl_sdmmc1_default: sdmmc1_default {
cmd_data {
pinmux = <PIN_PA28__SDMMC1_CMD>,
<PIN_PA18__SDMMC1_DAT0>,
<PIN_PA19__SDMMC1_DAT1>,
<PIN_PA20__SDMMC1_DAT2>,
<PIN_PA21__SDMMC1_DAT3>;
bias-pull-up;
};
conf-ck_cd {
pinmux = <PIN_PA22__SDMMC1_CK>,
<PIN_PA30__SDMMC1_CD>;
bias-disable;
};
};
pinctrl_spi0_default: spi0_default {
pinmux = <PIN_PA14__SPI0_SPCK>,
<PIN_PA15__SPI0_MOSI>,

2
arch/arm/boot/dts/at91-sama5d3_xplained.dts
View File

@ -315,7 +315,7 @@
label = "PB_USER";
gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
gpio-key,wakeup;
wakeup-source;
};
};

12
arch/arm/boot/dts/at91-sama5d4_xplained.dts
View File

@ -50,7 +50,6 @@
compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
chosen {
bootargs = "ignore_loglevel earlyprintk";
stdout-path = "serial0:115200n8";
};
@ -59,15 +58,6 @@
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
slow_xtal {
clock-frequency = <32768>;
};
@ -235,7 +225,7 @@
label = "pb_user1";
gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
gpio-key,wakeup;
wakeup-source;
};
};

12
arch/arm/boot/dts/at91-sama5d4ek.dts
View File

@ -50,7 +50,6 @@
compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
chosen {
bootargs = "ignore_loglevel earlyprintk";
stdout-path = "serial0:115200n8";
};
@ -59,15 +58,6 @@
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
slow_xtal {
clock-frequency = <32768>;
};
@ -304,7 +294,7 @@
label = "pb_user1";
gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
gpio-key,wakeup;
wakeup-source;
};
};

9
arch/arm/boot/dts/at91rm9200ek.dts
View File

@ -21,15 +21,6 @@
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
slow_xtal {
clock-frequency = <32768>;
};

19
arch/arm/boot/dts/at91sam9261ek.dts
View File

@ -22,15 +22,6 @@
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
slow_xtal {
clock-frequency = <32768>;
};
@ -149,7 +140,7 @@
ti,debounce-tol = /bits/ 16 <65535>;
ti,debounce-max = /bits/ 16 <1>;
linux,wakeup;
wakeup-source;
};
};
@ -193,28 +184,28 @@
label = "button_0";
gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
linux,code = <256>;
gpio-key,wakeup;
wakeup-source;
};
button_1 {
label = "button_1";
gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
linux,code = <257>;
gpio-key,wakeup;
wakeup-source;
};
button_2 {
label = "button_2";
gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
linux,code = <258>;
gpio-key,wakeup;
wakeup-source;
};
button_3 {
label = "button_3";
gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
linux,code = <259>;
gpio-key,wakeup;
wakeup-source;
};
};
};

13
arch/arm/boot/dts/at91sam9263ek.dts
View File

@ -22,15 +22,6 @@
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <16367660>;
};
slow_xtal {
clock-frequency = <32768>;
};
@ -213,14 +204,14 @@
label = "left_click";
gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
linux,code = <272>;
gpio-key,wakeup;
wakeup-source;
};
right_click {
label = "right_click";
gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
linux,code = <273>;
gpio-key,wakeup;
wakeup-source;
};
};

13
arch/arm/boot/dts/at91sam9g20ek_common.dtsi
View File

@ -19,15 +19,6 @@
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
slow_xtal {
clock-frequency = <32768>;
};
@ -206,14 +197,14 @@
label = "Button 3";
gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
gpio-key,wakeup;
wakeup-source;
};
btn4 {
label = "Button 4";
gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
gpio-key,wakeup;
wakeup-source;
};
};

13
arch/arm/boot/dts/at91sam9m10g45ek.dts
View File

@ -24,15 +24,6 @@
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
slow_xtal {
clock-frequency = <32768>;
};
@ -323,14 +314,14 @@
label = "left_click";
gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
linux,code = <272>;
gpio-key,wakeup;
wakeup-source;
};
right_click {
label = "right_click";
gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
linux,code = <273>;
gpio-key,wakeup;
wakeup-source;
};
left {

11
arch/arm/boot/dts/at91sam9n12ek.dts
View File

@ -23,15 +23,6 @@
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <16000000>;
};
slow_xtal {
clock-frequency = <32768>;
};
@ -219,7 +210,7 @@
label = "Enter";
gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
linux,code = <28>;
gpio-key,wakeup;
wakeup-source;
};
};

13
arch/arm/boot/dts/at91sam9rlek.dts
View File

@ -22,15 +22,6 @@
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
slow_xtal {
clock-frequency = <32768>;
};
@ -225,14 +216,14 @@
label = "right_click";
gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
linux,code = <273>;
gpio-key,wakeup;
wakeup-source;
};
left_click {
label = "left_click";
gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
linux,code = <272>;
gpio-key,wakeup;
wakeup-source;
};
};

11
arch/arm/boot/dts/at91sam9x5cm.dtsi
View File

@ -12,17 +12,6 @@
reg = <0x20000000 0x8000000>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
};
clocks {
slow_xtal {
clock-frequency = <32768>;

4
arch/arm/boot/dts/dra7.dtsi
View File

@ -1459,8 +1459,8 @@
interrupt-names = "tx", "rx";
dmas = <&sdma_xbar 133>, <&sdma_xbar 132>;
dma-names = "tx", "rx";
clocks = <&mcasp3_ahclkx_mux>;
clock-names = "fck";
clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
clock-names = "fck", "ahclkx";
status = "disabled";
};

16
arch/arm/boot/dts/imx27.dtsi
View File

@ -486,7 +486,10 @@
compatible = "fsl,imx27-usb";
reg = <0x10024000 0x200>;
interrupts = <56>;
clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
<&clks IMX27_CLK_USB_AHB_GATE>,
<&clks IMX27_CLK_USB_DIV>;
clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 0>;
status = "disabled";
};
@ -495,7 +498,10 @@
compatible = "fsl,imx27-usb";
reg = <0x10024200 0x200>;
interrupts = <54>;
clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
<&clks IMX27_CLK_USB_AHB_GATE>,
<&clks IMX27_CLK_USB_DIV>;
clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 1>;
dr_mode = "host";
status = "disabled";
@ -505,7 +511,10 @@
compatible = "fsl,imx27-usb";
reg = <0x10024400 0x200>;
interrupts = <55>;
clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
<&clks IMX27_CLK_USB_AHB_GATE>,
<&clks IMX27_CLK_USB_DIV>;
clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host";
status = "disabled";
@ -515,7 +524,6 @@
#index-cells = <1>;
compatible = "fsl,imx27-usbmisc";
reg = <0x10024600 0x200>;
clocks = <&clks IMX27_CLK_USB_AHB_GATE>;
};
sahara2: sahara@10025000 {

2
arch/arm/boot/dts/k2l-netcp.dtsi
View File

@ -137,7 +137,7 @@ netcp: netcp@26000000 {
/* NetCP address range */
ranges = <0 0x26000000 0x1000000>;
clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
clocks = <&clkosr>, <&papllclk>, <&clkcpgmac>, <&chipclk12>;
dma-coherent;
ti,navigator-dmas = <&dma_gbe 0>,

2
arch/arm/boot/dts/kirkwood-ts219.dtsi
View File

@ -40,7 +40,7 @@
};
poweroff@12100 {
compatible = "qnap,power-off";
reg = <0x12000 0x100>;
reg = <0x12100 0x100>;
clocks = <&gate_clk 7>;
};
spi@10600 {

4
arch/arm/boot/dts/rk3288-veyron-minnie.dts
View File

@ -86,6 +86,10 @@
};
};
&emmc {
/delete-property/mmc-hs200-1_8v;
};
&gpio_keys {
pinctrl-0 = <&pwr_key_l &ap_lid_int_l &volum_down_l &volum_up_l>;

10
arch/arm/boot/dts/rk3288.dtsi
View File

@ -452,8 +452,10 @@
clock-names = "tsadc", "apb_pclk";
resets = <&cru SRST_TSADC>;
reset-names = "tsadc-apb";
pinctrl-names = "default";
pinctrl-0 = <&otp_out>;
pinctrl-names = "init", "default", "sleep";
pinctrl-0 = <&otp_gpio>;
pinctrl-1 = <&otp_out>;
pinctrl-2 = <&otp_gpio>;
#thermal-sensor-cells = <1>;
rockchip,hw-tshut-temp = <95000>;
status = "disabled";
@ -1395,6 +1397,10 @@
};
tsadc {
otp_gpio: otp-gpio {
rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
};
otp_out: otp-out {
rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>;
};

2
arch/arm/boot/dts/sama5d35ek.dts
View File

@ -49,7 +49,7 @@
label = "pb_user1";
gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
gpio-key,wakeup;
wakeup-source;
};
};
};

2
arch/arm/boot/dts/sama5d4.dtsi
View File

@ -1300,7 +1300,7 @@
};
watchdog@fc068640 {
compatible = "atmel,at91sam9260-wdt";
compatible = "atmel,sama5d4-wdt";
reg = <0xfc068640 0x10>;
clocks = <&clk32k>;
status = "disabled";

2
arch/arm/boot/dts/usb_a9260_common.dtsi
View File

@ -115,7 +115,7 @@
label = "user_pb";
gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>;
gpio-key,wakeup;
wakeup-source;
};
};

2
arch/arm/boot/dts/usb_a9263.dts
View File

@ -143,7 +143,7 @@
label = "user_pb";
gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>;
gpio-key,wakeup;
wakeup-source;
};
};

8
arch/arm/boot/dts/vfxxx.dtsi
View File

@ -158,7 +158,7 @@
interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_DSPI0>;
clock-names = "dspi";
spi-num-chipselects = <5>;
spi-num-chipselects = <6>;
status = "disabled";
};
@ -170,7 +170,7 @@
interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_DSPI1>;
clock-names = "dspi";
spi-num-chipselects = <5>;
spi-num-chipselects = <4>;
status = "disabled";
};
@ -461,6 +461,8 @@
clock-names = "adc";
#io-channel-cells = <1>;
status = "disabled";
fsl,adck-max-frequency = <30000000>, <40000000>,
<20000000>;
};
esdhc0: esdhc@400b1000 {
@ -472,8 +474,6 @@
<&clks VF610_CLK_ESDHC0>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
fsl,adck-max-frequency = <30000000>, <40000000>,
<20000000>;
};
esdhc1: esdhc@400b2000 {

1
arch/arm/configs/at91_dt_defconfig
View File

@ -125,7 +125,6 @@ CONFIG_POWER_RESET=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_SSB=m
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y

1
arch/arm/configs/sama5_defconfig
View File

@ -129,7 +129,6 @@ CONFIG_GPIO_SYSFS=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_RESET=y
# CONFIG_HWMON is not set
CONFIG_SSB=m
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y

5
arch/arm/include/asm/irq.h
View File

@ -40,6 +40,11 @@ extern void arch_trigger_all_cpu_backtrace(bool);
#define arch_trigger_all_cpu_backtrace(x) arch_trigger_all_cpu_backtrace(x)
#endif
static inline int nr_legacy_irqs(void)
{
return NR_IRQS_LEGACY;
}
#endif
#endif

12
arch/arm/include/asm/kvm_emulate.h
View File

@ -28,6 +28,18 @@
unsigned long *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num);
unsigned long *vcpu_spsr(struct kvm_vcpu *vcpu);
static inline unsigned long vcpu_get_reg(struct kvm_vcpu *vcpu,
u8 reg_num)
{
return *vcpu_reg(vcpu, reg_num);
}
static inline void vcpu_set_reg(struct kvm_vcpu *vcpu, u8 reg_num,
unsigned long val)
{
*vcpu_reg(vcpu, reg_num) = val;
}
bool kvm_condition_valid(struct kvm_vcpu *vcpu);
void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr);
void kvm_inject_undefined(struct kvm_vcpu *vcpu);

1
arch/arm/include/uapi/asm/unistd.h
View File

@ -416,6 +416,7 @@
#define __NR_execveat (__NR_SYSCALL_BASE+387)
#define __NR_userfaultfd (__NR_SYSCALL_BASE+388)
#define __NR_membarrier (__NR_SYSCALL_BASE+389)
#define __NR_mlock2 (__NR_SYSCALL_BASE+390)
/*
* The following SWIs are ARM private.

19
arch/arm/kernel/bios32.c
View File

@ -17,11 +17,6 @@
#include <asm/mach/pci.h>
static int debug_pci;
static resource_size_t (*align_resource)(struct pci_dev *dev,
const struct resource *res,
resource_size_t start,
resource_size_t size,
resource_size_t align) = NULL;
/*
* We can't use pci_get_device() here since we are
@ -461,7 +456,6 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
sys->busnr = busnr;
sys->swizzle = hw->swizzle;
sys->map_irq = hw->map_irq;
align_resource = hw->align_resource;
INIT_LIST_HEAD(&sys->resources);
if (hw->private_data)
@ -470,6 +464,8 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
ret = hw->setup(nr, sys);
if (ret > 0) {
struct pci_host_bridge *host_bridge;
ret = pcibios_init_resources(nr, sys);
if (ret) {
kfree(sys);
@ -491,6 +487,9 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
busnr = sys->bus->busn_res.end + 1;
list_add(&sys->node, head);
host_bridge = pci_find_host_bridge(sys->bus);
host_bridge->align_resource = hw->align_resource;
} else {
kfree(sys);
if (ret < 0)
@ -578,14 +577,18 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
{
struct pci_dev *dev = data;
resource_size_t start = res->start;
struct pci_host_bridge *host_bridge;
if (res->flags & IORESOURCE_IO && start & 0x300)
start = (start + 0x3ff) & ~0x3ff;
start = (start + align - 1) & ~(align - 1);
if (align_resource)
return align_resource(dev, res, start, size, align);
host_bridge = pci_find_host_bridge(dev->bus);
if (host_bridge->align_resource)
return host_bridge->align_resource(dev, res,
start, size, align);
return start;
}

1
arch/arm/kernel/calls.S
View File

@ -399,6 +399,7 @@
CALL(sys_execveat)
CALL(sys_userfaultfd)
CALL(sys_membarrier)
CALL(sys_mlock2)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted

7
arch/arm/kvm/arm.c
View File

@ -563,18 +563,13 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
if (vcpu->arch.power_off || vcpu->arch.pause)
vcpu_sleep(vcpu);
/*
* Disarming the background timer must be done in a
* preemptible context, as this call may sleep.
*/
kvm_timer_flush_hwstate(vcpu);
/*
* Preparing the interrupts to be injected also
* involves poking the GIC, which must be done in a
* non-preemptible context.
*/
preempt_disable();
kvm_timer_flush_hwstate(vcpu);
kvm_vgic_flush_hwstate(vcpu);
local_irq_disable();

5
arch/arm/kvm/mmio.c
View File

@ -115,7 +115,7 @@ int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run)
trace_kvm_mmio(KVM_TRACE_MMIO_READ, len, run->mmio.phys_addr,
data);
data = vcpu_data_host_to_guest(vcpu, data, len);
*vcpu_reg(vcpu, vcpu->arch.mmio_decode.rt) = data;
vcpu_set_reg(vcpu, vcpu->arch.mmio_decode.rt, data);
}
return 0;
@ -186,7 +186,8 @@ int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run,
rt = vcpu->arch.mmio_decode.rt;
if (is_write) {
data = vcpu_data_guest_to_host(vcpu, *vcpu_reg(vcpu, rt), len);
data = vcpu_data_guest_to_host(vcpu, vcpu_get_reg(vcpu, rt),
len);
trace_kvm_mmio(KVM_TRACE_MMIO_WRITE, len, fault_ipa, data);
mmio_write_buf(data_buf, len, data);

15
arch/arm/kvm/mmu.c
View File

@ -98,6 +98,11 @@ static void kvm_flush_dcache_pud(pud_t pud)
__kvm_flush_dcache_pud(pud);
}
static bool kvm_is_device_pfn(unsigned long pfn)
{
return !pfn_valid(pfn);
}
/**
* stage2_dissolve_pmd() - clear and flush huge PMD entry
* @kvm: pointer to kvm structure.
@ -213,7 +218,7 @@ static void unmap_ptes(struct kvm *kvm, pmd_t *pmd,
kvm_tlb_flush_vmid_ipa(kvm, addr);
/* No need to invalidate the cache for device mappings */
if ((pte_val(old_pte) & PAGE_S2_DEVICE) != PAGE_S2_DEVICE)
if (!kvm_is_device_pfn(pte_pfn(old_pte)))
kvm_flush_dcache_pte(old_pte);
put_page(virt_to_page(pte));
@ -305,8 +310,7 @@ static void stage2_flush_ptes(struct kvm *kvm, pmd_t *pmd,
pte = pte_offset_kernel(pmd, addr);
do {
if (!pte_none(*pte) &&
(pte_val(*pte) & PAGE_S2_DEVICE) != PAGE_S2_DEVICE)
if (!pte_none(*pte) && !kvm_is_device_pfn(pte_pfn(*pte)))
kvm_flush_dcache_pte(*pte);
} while (pte++, addr += PAGE_SIZE, addr != end);
}
@ -1037,11 +1041,6 @@ static bool kvm_is_write_fault(struct kvm_vcpu *vcpu)
return kvm_vcpu_dabt_iswrite(vcpu);
}
static bool kvm_is_device_pfn(unsigned long pfn)
{
return !pfn_valid(pfn);
}
/**
* stage2_wp_ptes - write protect PMD range
* @pmd: pointer to pmd entry

20
arch/arm/kvm/psci.c
View File

@ -75,7 +75,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
unsigned long context_id;
phys_addr_t target_pc;
cpu_id = *vcpu_reg(source_vcpu, 1) & MPIDR_HWID_BITMASK;
cpu_id = vcpu_get_reg(source_vcpu, 1) & MPIDR_HWID_BITMASK;
if (vcpu_mode_is_32bit(source_vcpu))
cpu_id &= ~((u32) 0);
@ -94,8 +94,8 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
return PSCI_RET_INVALID_PARAMS;
}
target_pc = *vcpu_reg(source_vcpu, 2);
context_id = *vcpu_reg(source_vcpu, 3);
target_pc = vcpu_get_reg(source_vcpu, 2);
context_id = vcpu_get_reg(source_vcpu, 3);
kvm_reset_vcpu(vcpu);
@ -114,7 +114,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
* NOTE: We always update r0 (or x0) because for PSCI v0.1
* the general puspose registers are undefined upon CPU_ON.
*/
*vcpu_reg(vcpu, 0) = context_id;
vcpu_set_reg(vcpu, 0, context_id);
vcpu->arch.power_off = false;
smp_mb(); /* Make sure the above is visible */
@ -134,8 +134,8 @@ static unsigned long kvm_psci_vcpu_affinity_info(struct kvm_vcpu *vcpu)
struct kvm *kvm = vcpu->kvm;
struct kvm_vcpu *tmp;
target_affinity = *vcpu_reg(vcpu, 1);
lowest_affinity_level = *vcpu_reg(vcpu, 2);
target_affinity = vcpu_get_reg(vcpu, 1);
lowest_affinity_level = vcpu_get_reg(vcpu, 2);
/* Determine target affinity mask */
target_affinity_mask = psci_affinity_mask(lowest_affinity_level);
@ -209,7 +209,7 @@ int kvm_psci_version(struct kvm_vcpu *vcpu)
static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
{
int ret = 1;
unsigned long psci_fn = *vcpu_reg(vcpu, 0) & ~((u32) 0);
unsigned long psci_fn = vcpu_get_reg(vcpu, 0) & ~((u32) 0);
unsigned long val;
switch (psci_fn) {
@ -273,13 +273,13 @@ static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
break;
}
*vcpu_reg(vcpu, 0) = val;
vcpu_set_reg(vcpu, 0, val);
return ret;
}
static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu)
{
unsigned long psci_fn = *vcpu_reg(vcpu, 0) & ~((u32) 0);
unsigned long psci_fn = vcpu_get_reg(vcpu, 0) & ~((u32) 0);
unsigned long val;
switch (psci_fn) {
@ -295,7 +295,7 @@ static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu)
break;
}
*vcpu_reg(vcpu, 0) = val;
vcpu_set_reg(vcpu, 0, val);
return 1;
}

4
arch/arm/mach-dove/include/mach/entry-macro.S
View File

@ -18,13 +18,13 @@
@ check low interrupts
ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
mov \irqnr, #31
mov \irqnr, #32
ands \irqstat, \irqstat, \tmp
@ if no low interrupts set, check high interrupts
ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF]
moveq \irqnr, #63
moveq \irqnr, #64
andeqs \irqstat, \irqstat, \tmp
@ find first active interrupt source

1
arch/arm/mach-imx/gpc.c
View File

@ -177,6 +177,7 @@ static struct irq_chip imx_gpc_chip = {
.irq_unmask = imx_gpc_irq_unmask,
.irq_retrigger = irq_chip_retrigger_hierarchy,
.irq_set_wake = imx_gpc_irq_set_wake,
.irq_set_type = irq_chip_set_type_parent,
#ifdef CONFIG_SMP
.irq_set_affinity = irq_chip_set_affinity_parent,
#endif

6
arch/arm/mach-omap2/omap-smp.c
View File

@ -143,9 +143,9 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
* Ensure that CPU power state is set to ON to avoid CPU
* powerdomain transition on wfi
*/
clkdm_wakeup(cpu1_clkdm);
omap_set_pwrdm_state(cpu1_pwrdm, PWRDM_POWER_ON);
clkdm_allow_idle(cpu1_clkdm);
clkdm_wakeup_nolock(cpu1_clkdm);
pwrdm_set_next_pwrst(cpu1_pwrdm, PWRDM_POWER_ON);
clkdm_allow_idle_nolock(cpu1_clkdm);
if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) {
while (gic_dist_disabled()) {

66
arch/arm/mach-omap2/omap_hwmod.c
View File

@ -890,6 +890,36 @@ static int _init_opt_clks(struct omap_hwmod *oh)
return ret;
}
static void _enable_optional_clocks(struct omap_hwmod *oh)
{
struct omap_hwmod_opt_clk *oc;
int i;
pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name);
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
if (oc->_clk) {
pr_debug("omap_hwmod: enable %s:%s\n", oc->role,
__clk_get_name(oc->_clk));
clk_enable(oc->_clk);
}
}
static void _disable_optional_clocks(struct omap_hwmod *oh)
{
struct omap_hwmod_opt_clk *oc;
int i;
pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name);
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
if (oc->_clk) {
pr_debug("omap_hwmod: disable %s:%s\n", oc->role,
__clk_get_name(oc->_clk));
clk_disable(oc->_clk);
}
}
/**
* _enable_clocks - enable hwmod main clock and interface clocks
* @oh: struct omap_hwmod *
@ -917,6 +947,9 @@ static int _enable_clocks(struct omap_hwmod *oh)
clk_enable(os->_clk);
}
if (oh->flags & HWMOD_OPT_CLKS_NEEDED)
_enable_optional_clocks(oh);
/* The opt clocks are controlled by the device driver. */
return 0;
@ -948,41 +981,14 @@ static int _disable_clocks(struct omap_hwmod *oh)
clk_disable(os->_clk);
}
if (oh->flags & HWMOD_OPT_CLKS_NEEDED)
_disable_optional_clocks(oh);
/* The opt clocks are controlled by the device driver. */
return 0;
}
static void _enable_optional_clocks(struct omap_hwmod *oh)
{
struct omap_hwmod_opt_clk *oc;
int i;
pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name);
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
if (oc->_clk) {
pr_debug("omap_hwmod: enable %s:%s\n", oc->role,
__clk_get_name(oc->_clk));
clk_enable(oc->_clk);
}
}
static void _disable_optional_clocks(struct omap_hwmod *oh)
{
struct omap_hwmod_opt_clk *oc;
int i;
pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name);
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
if (oc->_clk) {
pr_debug("omap_hwmod: disable %s:%s\n", oc->role,
__clk_get_name(oc->_clk));
clk_disable(oc->_clk);
}
}
/**
* _omap4_enable_module - enable CLKCTRL modulemode on OMAP4
* @oh: struct omap_hwmod *

3
arch/arm/mach-omap2/omap_hwmod.h
View File

@ -523,6 +523,8 @@ struct omap_hwmod_omap4_prcm {
* HWMOD_RECONFIG_IO_CHAIN: omap_hwmod code needs to reconfigure wake-up
* events by calling _reconfigure_io_chain() when a device is enabled
* or idled.
* HWMOD_OPT_CLKS_NEEDED: The optional clocks are needed for the module to
* operate and they need to be handled at the same time as the main_clk.
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
@ -538,6 +540,7 @@ struct omap_hwmod_omap4_prcm {
#define HWMOD_FORCE_MSTANDBY (1 << 11)
#define HWMOD_SWSUP_SIDLE_ACT (1 << 12)
#define HWMOD_RECONFIG_IO_CHAIN (1 << 13)
#define HWMOD_OPT_CLKS_NEEDED (1 << 14)
/*
* omap_hwmod._int_flags definitions

56
arch/arm/mach-omap2/omap_hwmod_7xx_data.c
View File

@ -1297,6 +1297,44 @@ static struct omap_hwmod dra7xx_mcspi4_hwmod = {
.dev_attr = &mcspi4_dev_attr,
};
/*
* 'mcasp' class
*
*/
static struct omap_hwmod_class_sysconfig dra7xx_mcasp_sysc = {
.sysc_offs = 0x0004,
.sysc_flags = SYSC_HAS_SIDLEMODE,
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type3,
};
static struct omap_hwmod_class dra7xx_mcasp_hwmod_class = {
.name = "mcasp",
.sysc = &dra7xx_mcasp_sysc,
};
/* mcasp3 */
static struct omap_hwmod_opt_clk mcasp3_opt_clks[] = {
{ .role = "ahclkx", .clk = "mcasp3_ahclkx_mux" },
};
static struct omap_hwmod dra7xx_mcasp3_hwmod = {
.name = "mcasp3",
.class = &dra7xx_mcasp_hwmod_class,
.clkdm_name = "l4per2_clkdm",
.main_clk = "mcasp3_aux_gfclk_mux",
.flags = HWMOD_OPT_CLKS_NEEDED,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP3_CLKCTRL_OFFSET,
.context_offs = DRA7XX_RM_L4PER2_MCASP3_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
.opt_clks = mcasp3_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(mcasp3_opt_clks),
};
/*
* 'mmc' class
*
@ -2566,6 +2604,22 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per2 -> mcasp3 */
static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp3 = {
.master = &dra7xx_l4_per2_hwmod,
.slave = &dra7xx_mcasp3_hwmod,
.clk = "l4_root_clk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l3_main_1 -> mcasp3 */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__mcasp3 = {
.master = &dra7xx_l3_main_1_hwmod,
.slave = &dra7xx_mcasp3_hwmod,
.clk = "l3_iclk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per1 -> elm */
static struct omap_hwmod_ocp_if dra7xx_l4_per1__elm = {
.master = &dra7xx_l4_per1_hwmod,
@ -3308,6 +3362,8 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
&dra7xx_l4_wkup__dcan1,
&dra7xx_l4_per2__dcan2,
&dra7xx_l4_per2__cpgmac0,
&dra7xx_l4_per2__mcasp3,
&dra7xx_l3_main_1__mcasp3,
&dra7xx_gmac__mdio,
&dra7xx_l4_cfg__dma_system,
&dra7xx_l3_main_1__dss,

3
arch/arm/mach-omap2/omap_hwmod_81xx_data.c
View File

@ -144,6 +144,7 @@ static struct omap_hwmod dm81xx_l4_ls_hwmod = {
.name = "l4_ls",
.clkdm_name = "alwon_l3s_clkdm",
.class = &l4_hwmod_class,
.flags = HWMOD_NO_IDLEST,
};
/*
@ -155,6 +156,7 @@ static struct omap_hwmod dm81xx_l4_hs_hwmod = {
.name = "l4_hs",
.clkdm_name = "alwon_l3_med_clkdm",
.class = &l4_hwmod_class,
.flags = HWMOD_NO_IDLEST,
};
/* L3 slow -> L4 ls peripheral interface running at 125MHz */
@ -850,6 +852,7 @@ static struct omap_hwmod dm816x_emac0_hwmod = {
.name = "emac0",
.clkdm_name = "alwon_ethernet_clkdm",
.class = &dm816x_emac_hwmod_class,
.flags = HWMOD_NO_IDLEST,
};
static struct omap_hwmod_ocp_if dm81xx_l4_hs__emac0 = {

29
arch/arm/mach-omap2/pdata-quirks.c
View File

@ -24,9 +24,6 @@
#include <linux/platform_data/iommu-omap.h>
#include <linux/platform_data/wkup_m3.h>
#include <asm/siginfo.h>
#include <asm/signal.h>
#include "common.h"
#include "common-board-devices.h"
#include "dss-common.h"
@ -385,29 +382,6 @@ static void __init omap3_pandora_legacy_init(void)
}
#endif /* CONFIG_ARCH_OMAP3 */
#ifdef CONFIG_SOC_TI81XX
static int fault_fixed_up;
static int t410_abort_handler(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
if ((fsr == 0x406 || fsr == 0xc06) && !fault_fixed_up) {
pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
addr, fsr);
fault_fixed_up = 1;
return 0;
}
return 1;
}
static void __init t410_abort_init(void)
{
hook_fault_code(16 + 6, t410_abort_handler, SIGBUS, BUS_OBJERR,
"imprecise external abort");
}
#endif
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
static struct iommu_platform_data omap4_iommu_pdata = {
.reset_name = "mmu_cache",
@ -536,9 +510,6 @@ static struct pdata_init pdata_quirks[] __initdata = {
{ "openpandora,omap3-pandora-600mhz", omap3_pandora_legacy_init, },
{ "openpandora,omap3-pandora-1ghz", omap3_pandora_legacy_init, },
#endif
#ifdef CONFIG_SOC_TI81XX
{ "hp,t410", t410_abort_init, },
#endif
#ifdef CONFIG_SOC_OMAP5
{ "ti,omap5-uevm", omap5_uevm_legacy_init, },
#endif

4
arch/arm/mach-omap2/pm34xx.c
View File

@ -301,11 +301,11 @@ static void omap3_pm_idle(void)
if (omap_irq_pending())
return;
trace_cpu_idle(1, smp_processor_id());
trace_cpu_idle_rcuidle(1, smp_processor_id());
omap_sram_idle();
trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
}
#ifdef CONFIG_SUSPEND

2
arch/arm/mach-orion5x/include/mach/entry-macro.S
View File

@ -21,5 +21,5 @@
@ find cause bits that are unmasked
ands \irqstat, \irqstat, \tmp @ clear Z flag if any
clzne \irqnr, \irqstat @ calc irqnr
rsbne \irqnr, \irqnr, #31
rsbne \irqnr, \irqnr, #32
.endm

2
arch/arm/mach-pxa/palm27x.c
View File

@ -344,7 +344,7 @@ void __init palm27x_pwm_init(int bl, int lcd)
{
palm_bl_power = bl;
palm_lcd_power = lcd;
pwm_add_lookup(palm27x_pwm_lookup, ARRAY_SIZE(palm27x_pwm_lookup));
pwm_add_table(palm27x_pwm_lookup, ARRAY_SIZE(palm27x_pwm_lookup));
platform_device_register(&palm27x_backlight);
}
#endif

2
arch/arm/mach-pxa/palmtc.c
View File

@ -169,7 +169,7 @@ static inline void palmtc_keys_init(void) {}
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
static struct pwm_lookup palmtc_pwm_lookup[] = {
PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS,
PWM_PERIOD_NORMAL),
PWM_POLARITY_NORMAL),
};
static struct platform_pwm_backlight_data palmtc_backlight_data = {

2
arch/arm/mach-shmobile/setup-r8a7793.c
View File

@ -19,7 +19,7 @@
#include "common.h"
#include "rcar-gen2.h"
static const char *r8a7793_boards_compat_dt[] __initconst = {
static const char * const r8a7793_boards_compat_dt[] __initconst = {
"renesas,r8a7793",
NULL,
};

2
arch/arm/mach-zx/Kconfig
View File

@ -13,7 +13,7 @@ config SOC_ZX296702
select ARM_GLOBAL_TIMER
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select PM_GENERIC_DOMAINS
select PM_GENERIC_DOMAINS if PM
help
Support for ZTE ZX296702 SoC which is a dual core CortexA9MP
endif

23
arch/arm64/Kconfig
View File

@ -49,7 +49,7 @@ config ARM64
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_BITREVERSE
select HAVE_ARCH_JUMP_LABEL
select HAVE_ARCH_KASAN if SPARSEMEM_VMEMMAP
select HAVE_ARCH_KASAN if SPARSEMEM_VMEMMAP && !(ARM64_16K_PAGES && ARM64_VA_BITS_48)
select HAVE_ARCH_KGDB
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
@ -316,6 +316,27 @@ config ARM64_ERRATUM_832075
If unsure, say Y.
config ARM64_ERRATUM_834220
bool "Cortex-A57: 834220: Stage 2 translation fault might be incorrectly reported in presence of a Stage 1 fault"
depends on KVM
default y
help
This option adds an alternative code sequence to work around ARM
erratum 834220 on Cortex-A57 parts up to r1p2.
Affected Cortex-A57 parts might report a Stage 2 translation
fault as the result of a Stage 1 fault for load crossing a
page boundary when there is a permission or device memory
alignment fault at Stage 1 and a translation fault at Stage 2.
The workaround is to verify that the Stage 1 translation
doesn't generate a fault before handling the Stage 2 fault.
Please note that this does not necessarily enable the workaround,
as it depends on the alternative framework, which will only patch
the kernel if an affected CPU is detected.
If unsure, say Y.
config ARM64_ERRATUM_845719
bool "Cortex-A53: 845719: a load might read incorrect data"
depends on COMPAT

2
arch/arm64/crypto/aes-ce-cipher.c
View File

@ -237,7 +237,7 @@ EXPORT_SYMBOL(ce_aes_setkey);
static struct crypto_alg aes_alg = {
.cra_name = "aes",
.cra_driver_name = "aes-ce",
.cra_priority = 300,
.cra_priority = 250,
.cra_flags = CRYPTO_ALG_TYPE_CIPHER,
.cra_blocksize = AES_BLOCK_SIZE,
.cra_ctxsize = sizeof(struct crypto_aes_ctx),

16
arch/arm64/include/asm/barrier.h
View File

@ -64,27 +64,31 @@ do { \
#define smp_load_acquire(p) \
({ \
typeof(*p) ___p1; \
union { typeof(*p) __val; char __c[1]; } __u; \
compiletime_assert_atomic_type(*p); \
switch (sizeof(*p)) { \
case 1: \
asm volatile ("ldarb %w0, %1" \
: "=r" (___p1) : "Q" (*p) : "memory"); \
: "=r" (*(__u8 *)__u.__c) \
: "Q" (*p) : "memory"); \
break; \
case 2: \
asm volatile ("ldarh %w0, %1" \
: "=r" (___p1) : "Q" (*p) : "memory"); \
: "=r" (*(__u16 *)__u.__c) \
: "Q" (*p) : "memory"); \
break; \
case 4: \
asm volatile ("ldar %w0, %1" \
: "=r" (___p1) : "Q" (*p) : "memory"); \
: "=r" (*(__u32 *)__u.__c) \
: "Q" (*p) : "memory"); \
break; \
case 8: \
asm volatile ("ldar %0, %1" \
: "=r" (___p1) : "Q" (*p) : "memory"); \
: "=r" (*(__u64 *)__u.__c) \
: "Q" (*p) : "memory"); \
break; \
} \
___p1; \
__u.__val; \
})
#define read_barrier_depends() do { } while(0)

3
arch/arm64/include/asm/compat.h
View File

@ -23,7 +23,6 @@
*/
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
#define COMPAT_USER_HZ 100
#ifdef __AARCH64EB__
@ -234,7 +233,7 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr)
return (u32)(unsigned long)uptr;
}
#define compat_user_stack_pointer() (user_stack_pointer(current_pt_regs()))
#define compat_user_stack_pointer() (user_stack_pointer(task_pt_regs(current)))
static inline void __user *arch_compat_alloc_user_space(long len)
{

25
arch/arm64/include/asm/cpufeature.h
View File

@ -29,8 +29,9 @@
#define ARM64_HAS_PAN 4
#define ARM64_HAS_LSE_ATOMICS 5
#define ARM64_WORKAROUND_CAVIUM_23154 6
#define ARM64_WORKAROUND_834220 7
#define ARM64_NCAPS 7
#define ARM64_NCAPS 8
#ifndef __ASSEMBLY__
@ -46,8 +47,12 @@ enum ftr_type {
#define FTR_STRICT true /* SANITY check strict matching required */
#define FTR_NONSTRICT false /* SANITY check ignored */
#define FTR_SIGNED true /* Value should be treated as signed */
#define FTR_UNSIGNED false /* Value should be treated as unsigned */
struct arm64_ftr_bits {
bool strict; /* CPU Sanity check: strict matching required ? */
bool sign; /* Value is signed ? */
bool strict; /* CPU Sanity check: strict matching required ? */
enum ftr_type type;
u8 shift;
u8 width;
@ -123,6 +128,18 @@ cpuid_feature_extract_field(u64 features, int field)
return cpuid_feature_extract_field_width(features, field, 4);
}
static inline unsigned int __attribute_const__
cpuid_feature_extract_unsigned_field_width(u64 features, int field, int width)
{
return (u64)(features << (64 - width - field)) >> (64 - width);
}
static inline unsigned int __attribute_const__
cpuid_feature_extract_unsigned_field(u64 features, int field)
{
return cpuid_feature_extract_unsigned_field_width(features, field, 4);
}
static inline u64 arm64_ftr_mask(struct arm64_ftr_bits *ftrp)
{
return (u64)GENMASK(ftrp->shift + ftrp->width - 1, ftrp->shift);
@ -130,7 +147,9 @@ static inline u64 arm64_ftr_mask(struct arm64_ftr_bits *ftrp)
static inline s64 arm64_ftr_value(struct arm64_ftr_bits *ftrp, u64 val)
{
return cpuid_feature_extract_field_width(val, ftrp->shift, ftrp->width);
return ftrp->sign ?
cpuid_feature_extract_field_width(val, ftrp->shift, ftrp->width) :
cpuid_feature_extract_unsigned_field_width(val, ftrp->shift, ftrp->width);
}
static inline bool id_aa64mmfr0_mixed_endian_el0(u64 mmfr0)

13
arch/arm64/include/asm/dma-mapping.h
View File

@ -18,7 +18,6 @@
#ifdef __KERNEL__
#include <linux/acpi.h>
#include <linux/types.h>
#include <linux/vmalloc.h>
@ -26,22 +25,16 @@
#include <asm/xen/hypervisor.h>
#define DMA_ERROR_CODE (~(dma_addr_t)0)
extern struct dma_map_ops *dma_ops;
extern struct dma_map_ops dummy_dma_ops;
static inline struct dma_map_ops *__generic_dma_ops(struct device *dev)
{
if (unlikely(!dev))
return dma_ops;
else if (dev->archdata.dma_ops)
if (dev && dev->archdata.dma_ops)
return dev->archdata.dma_ops;
else if (acpi_disabled)
return dma_ops;
/*
* When ACPI is enabled, if arch_set_dma_ops is not called,
* we will disable device DMA capability by setting it
* to dummy_dma_ops.
* We expect no ISA devices, and all other DMA masters are expected to
* have someone call arch_setup_dma_ops at device creation time.
*/
return &dummy_dma_ops;
}

6
arch/arm64/include/asm/hw_breakpoint.h
View File

@ -138,16 +138,18 @@ extern struct pmu perf_ops_bp;
/* Determine number of BRP registers available. */
static inline int get_num_brps(void)
{
u64 dfr0 = read_system_reg(SYS_ID_AA64DFR0_EL1);
return 1 +
cpuid_feature_extract_field(read_system_reg(SYS_ID_AA64DFR0_EL1),
cpuid_feature_extract_unsigned_field(dfr0,
ID_AA64DFR0_BRPS_SHIFT);
}
/* Determine number of WRP registers available. */
static inline int get_num_wrps(void)
{
u64 dfr0 = read_system_reg(SYS_ID_AA64DFR0_EL1);
return 1 +
cpuid_feature_extract_field(read_system_reg(SYS_ID_AA64DFR0_EL1),
cpuid_feature_extract_unsigned_field(dfr0,
ID_AA64DFR0_WRPS_SHIFT);
}

5
arch/arm64/include/asm/irq.h
View File

@ -7,4 +7,9 @@ struct pt_regs;
extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
static inline int nr_legacy_irqs(void)
{
return 0;
}
#endif

18
arch/arm64/include/asm/kvm_emulate.h
View File

@ -99,12 +99,22 @@ static inline void vcpu_set_thumb(struct kvm_vcpu *vcpu)
*vcpu_cpsr(vcpu) |= COMPAT_PSR_T_BIT;
}
static inline unsigned long *vcpu_reg(const struct kvm_vcpu *vcpu, u8 reg_num)
/*
* vcpu_get_reg and vcpu_set_reg should always be passed a register number
* coming from a read of ESR_EL2. Otherwise, it may give the wrong result on
* AArch32 with banked registers.
*/
static inline unsigned long vcpu_get_reg(const struct kvm_vcpu *vcpu,
u8 reg_num)
{
if (vcpu_mode_is_32bit(vcpu))
return vcpu_reg32(vcpu, reg_num);
return (reg_num == 31) ? 0 : vcpu_gp_regs(vcpu)->regs.regs[reg_num];
}
return (unsigned long *)&vcpu_gp_regs(vcpu)->regs.regs[reg_num];
static inline void vcpu_set_reg(struct kvm_vcpu *vcpu, u8 reg_num,
unsigned long val)
{
if (reg_num != 31)
vcpu_gp_regs(vcpu)->regs.regs[reg_num] = val;
}
/* Get vcpu SPSR for current mode */

2
arch/arm64/include/asm/mmu_context.h
View File

@ -101,7 +101,7 @@ static inline void cpu_set_default_tcr_t0sz(void)
#define destroy_context(mm) do { } while(0)
void check_and_switch_context(struct mm_struct *mm, unsigned int cpu);
#define init_new_context(tsk,mm) ({ atomic64_set(&mm->context.id, 0); 0; })
#define init_new_context(tsk,mm) ({ atomic64_set(&(mm)->context.id, 0); 0; })
/*
* This is called when "tsk" is about to enter lazy TLB mode.

1
arch/arm64/include/asm/pgtable.h
View File

@ -81,6 +81,7 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
#define PAGE_KERNEL __pgprot(_PAGE_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE)
#define PAGE_KERNEL_RO __pgprot(_PAGE_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_RDONLY)
#define PAGE_KERNEL_ROX __pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_RDONLY)
#define PAGE_KERNEL_EXEC __pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_WRITE)
#define PAGE_KERNEL_EXEC_CONT __pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_CONT)

9
arch/arm64/kernel/cpu_errata.c
View File

@ -75,6 +75,15 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
(1 << MIDR_VARIANT_SHIFT) | 2),
},
#endif
#ifdef CONFIG_ARM64_ERRATUM_834220
{
/* Cortex-A57 r0p0 - r1p2 */
.desc = "ARM erratum 834220",
.capability = ARM64_WORKAROUND_834220,
MIDR_RANGE(MIDR_CORTEX_A57, 0x00,
(1 << MIDR_VARIANT_SHIFT) | 2),
},
#endif
#ifdef CONFIG_ARM64_ERRATUM_845719
{
/* Cortex-A53 r0p[01234] */

37
arch/arm64/kernel/cpufeature.c
View File

@ -44,8 +44,9 @@ unsigned int compat_elf_hwcap2 __read_mostly;
DECLARE_BITMAP(cpu_hwcaps, ARM64_NCAPS);
#define ARM64_FTR_BITS(STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL) \
#define __ARM64_FTR_BITS(SIGNED, STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL) \
{ \
.sign = SIGNED, \
.strict = STRICT, \
.type = TYPE, \
.shift = SHIFT, \
@ -53,6 +54,14 @@ DECLARE_BITMAP(cpu_hwcaps, ARM64_NCAPS);
.safe_val = SAFE_VAL, \
}
/* Define a feature with signed values */
#define ARM64_FTR_BITS(STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL) \
__ARM64_FTR_BITS(FTR_SIGNED, STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL)
/* Define a feature with unsigned value */
#define U_ARM64_FTR_BITS(STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL) \
__ARM64_FTR_BITS(FTR_UNSIGNED, STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL)
#define ARM64_FTR_END \
{ \
.width = 0, \
@ -99,7 +108,7 @@ static struct arm64_ftr_bits ftr_id_aa64mmfr0[] = {
* Differing PARange is fine as long as all peripherals and memory are mapped
* within the minimum PARange of all CPUs
*/
ARM64_FTR_BITS(FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_PARANGE_SHIFT, 4, 0),
U_ARM64_FTR_BITS(FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_PARANGE_SHIFT, 4, 0),
ARM64_FTR_END,
};
@ -115,18 +124,18 @@ static struct arm64_ftr_bits ftr_id_aa64mmfr1[] = {
};
static struct arm64_ftr_bits ftr_ctr[] = {
ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 31, 1, 1), /* RAO */
U_ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 31, 1, 1), /* RAO */
ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 28, 3, 0),
ARM64_FTR_BITS(FTR_STRICT, FTR_HIGHER_SAFE, 24, 4, 0), /* CWG */
ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 20, 4, 0), /* ERG */
ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 16, 4, 1), /* DminLine */
U_ARM64_FTR_BITS(FTR_STRICT, FTR_HIGHER_SAFE, 24, 4, 0), /* CWG */
U_ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 20, 4, 0), /* ERG */
U_ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 16, 4, 1), /* DminLine */
/*
* Linux can handle differing I-cache policies. Userspace JITs will
* make use of *minLine
*/
ARM64_FTR_BITS(FTR_NONSTRICT, FTR_EXACT, 14, 2, 0), /* L1Ip */
U_ARM64_FTR_BITS(FTR_NONSTRICT, FTR_EXACT, 14, 2, 0), /* L1Ip */
ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 4, 10, 0), /* RAZ */
ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 0, 4, 0), /* IminLine */
U_ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 0, 4, 0), /* IminLine */
ARM64_FTR_END,
};
@ -144,12 +153,12 @@ static struct arm64_ftr_bits ftr_id_mmfr0[] = {
static struct arm64_ftr_bits ftr_id_aa64dfr0[] = {
ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 32, 32, 0),
ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_CTX_CMPS_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_WRPS_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_BRPS_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64DFR0_PMUVER_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64DFR0_TRACEVER_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64DFR0_DEBUGVER_SHIFT, 4, 0x6),
U_ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_CTX_CMPS_SHIFT, 4, 0),
U_ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_WRPS_SHIFT, 4, 0),
U_ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_BRPS_SHIFT, 4, 0),
U_ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64DFR0_PMUVER_SHIFT, 4, 0),
U_ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64DFR0_TRACEVER_SHIFT, 4, 0),
U_ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64DFR0_DEBUGVER_SHIFT, 4, 0x6),
ARM64_FTR_END,
};

5
arch/arm64/kernel/cpuinfo.c
View File

@ -30,6 +30,7 @@
#include <linux/seq_file.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/delay.h>
/*
* In case the boot CPU is hotpluggable, we record its initial state and
@ -112,6 +113,10 @@ static int c_show(struct seq_file *m, void *v)
*/
seq_printf(m, "processor\t: %d\n", i);
seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
loops_per_jiffy / (500000UL/HZ),
loops_per_jiffy / (5000UL/HZ) % 100);
/*
* Dump out the common processor features in a single line.
* Userspace should read the hwcaps with getauxval(AT_HWCAP)

45
arch/arm64/kernel/efi.c
View File

@ -127,7 +127,11 @@ static int __init uefi_init(void)
table_size = sizeof(efi_config_table_64_t) * efi.systab->nr_tables;
config_tables = early_memremap(efi_to_phys(efi.systab->tables),
table_size);
if (config_tables == NULL) {
pr_warn("Unable to map EFI config table array.\n");
retval = -ENOMEM;
goto out;
}
retval = efi_config_parse_tables(config_tables, efi.systab->nr_tables,
sizeof(efi_config_table_64_t), NULL);
@ -209,6 +213,14 @@ void __init efi_init(void)
PAGE_ALIGN(params.mmap_size + (params.mmap & ~PAGE_MASK)));
memmap.phys_map = params.mmap;
memmap.map = early_memremap(params.mmap, params.mmap_size);
if (memmap.map == NULL) {
/*
* If we are booting via UEFI, the UEFI memory map is the only
* description of memory we have, so there is little point in
* proceeding if we cannot access it.
*/
panic("Unable to map EFI memory map.\n");
}
memmap.map_end = memmap.map + params.mmap_size;
memmap.desc_size = params.desc_size;
memmap.desc_version = params.desc_ver;
@ -224,8 +236,9 @@ static bool __init efi_virtmap_init(void)
{
efi_memory_desc_t *md;
init_new_context(NULL, &efi_mm);
for_each_efi_memory_desc(&memmap, md) {
u64 paddr, npages, size;
pgprot_t prot;
if (!(md->attribute & EFI_MEMORY_RUNTIME))
@ -233,11 +246,6 @@ static bool __init efi_virtmap_init(void)
if (md->virt_addr == 0)
return false;
paddr = md->phys_addr;
npages = md->num_pages;
memrange_efi_to_native(&paddr, &npages);
size = npages << PAGE_SHIFT;
pr_info(" EFI remap 0x%016llx => %p\n",
md->phys_addr, (void *)md->virt_addr);
@ -254,7 +262,9 @@ static bool __init efi_virtmap_init(void)
else
prot = PAGE_KERNEL;
create_pgd_mapping(&efi_mm, paddr, md->virt_addr, size, prot);
create_pgd_mapping(&efi_mm, md->phys_addr, md->virt_addr,
md->num_pages << EFI_PAGE_SHIFT,
__pgprot(pgprot_val(prot) | PTE_NG));
}
return true;
}
@ -270,12 +280,12 @@ static int __init arm64_enable_runtime_services(void)
if (!efi_enabled(EFI_BOOT)) {
pr_info("EFI services will not be available.\n");
return -1;
return 0;
}
if (efi_runtime_disabled()) {
pr_info("EFI runtime services will be disabled.\n");
return -1;
return 0;
}
pr_info("Remapping and enabling EFI services.\n");
@ -285,7 +295,7 @@ static int __init arm64_enable_runtime_services(void)
mapsize);
if (!memmap.map) {
pr_err("Failed to remap EFI memory map\n");
return -1;
return -ENOMEM;
}
memmap.map_end = memmap.map + mapsize;
efi.memmap = &memmap;
@ -294,13 +304,13 @@ static int __init arm64_enable_runtime_services(void)
sizeof(efi_system_table_t));
if (!efi.systab) {
pr_err("Failed to remap EFI System Table\n");
return -1;
return -ENOMEM;
}
set_bit(EFI_SYSTEM_TABLES, &efi.flags);
if (!efi_virtmap_init()) {
pr_err("No UEFI virtual mapping was installed -- runtime services will not be available\n");
return -1;
return -ENOMEM;
}
/* Set up runtime services function pointers */
@ -329,14 +339,7 @@ core_initcall(arm64_dmi_init);
static void efi_set_pgd(struct mm_struct *mm)
{
if (mm == &init_mm)
cpu_set_reserved_ttbr0();
else
cpu_switch_mm(mm->pgd, mm);
local_flush_tlb_all();
if (icache_is_aivivt())
__local_flush_icache_all();
switch_mm(NULL, mm, NULL);
}
void efi_virtmap_load(void)

10
arch/arm64/kernel/suspend.c
View File

@ -1,3 +1,4 @@
#include <linux/ftrace.h>
#include <linux/percpu.h>
#include <linux/slab.h>
#include <asm/cacheflush.h>
@ -70,6 +71,13 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
*/
local_dbg_save(flags);
/*
* Function graph tracer state gets incosistent when the kernel
* calls functions that never return (aka suspend finishers) hence
* disable graph tracing during their execution.
*/
pause_graph_tracing();
/*
* mm context saved on the stack, it will be restored when
* the cpu comes out of reset through the identity mapped
@ -111,6 +119,8 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
hw_breakpoint_restore(NULL);
}
unpause_graph_tracing();
/*
* Restore pstate flags. OS lock and mdscr have been already
* restored, so from this point onwards, debugging is fully

2
arch/arm64/kvm/handle_exit.c
View File

@ -37,7 +37,7 @@ static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
int ret;
trace_kvm_hvc_arm64(*vcpu_pc(vcpu), *vcpu_reg(vcpu, 0),
trace_kvm_hvc_arm64(*vcpu_pc(vcpu), vcpu_get_reg(vcpu, 0),
kvm_vcpu_hvc_get_imm(vcpu));
ret = kvm_psci_call(vcpu);

14
arch/arm64/kvm/hyp.S
View File

@ -864,6 +864,10 @@ ENTRY(__kvm_flush_vm_context)
ENDPROC(__kvm_flush_vm_context)
__kvm_hyp_panic:
// Stash PAR_EL1 before corrupting it in __restore_sysregs
mrs x0, par_el1
push x0, xzr
// Guess the context by looking at VTTBR:
// If zero, then we're already a host.
// Otherwise restore a minimal host context before panicing.
@ -898,7 +902,7 @@ __kvm_hyp_panic:
mrs x3, esr_el2
mrs x4, far_el2
mrs x5, hpfar_el2
mrs x6, par_el1
pop x6, xzr // active context PAR_EL1
mrs x7, tpidr_el2
mov lr, #(PSR_F_BIT | PSR_I_BIT | PSR_A_BIT | PSR_D_BIT |\
@ -914,7 +918,7 @@ __kvm_hyp_panic:
ENDPROC(__kvm_hyp_panic)
__hyp_panic_str:
.ascii "HYP panic:\nPS:%08x PC:%p ESR:%p\nFAR:%p HPFAR:%p PAR:%p\nVCPU:%p\n\0"
.ascii "HYP panic:\nPS:%08x PC:%016x ESR:%08x\nFAR:%016x HPFAR:%016x PAR:%016x\nVCPU:%p\n\0"
.align 2
@ -1015,9 +1019,15 @@ el1_trap:
b.ne 1f // Not an abort we care about
/* This is an abort. Check for permission fault */
alternative_if_not ARM64_WORKAROUND_834220
and x2, x1, #ESR_ELx_FSC_TYPE
cmp x2, #FSC_PERM
b.ne 1f // Not a permission fault
alternative_else
nop // Use the permission fault path to
nop // check for a valid S1 translation,
nop // regardless of the ESR value.
alternative_endif
/*
* Check for Stage-1 page table walk, which is guaranteed

Some files were not shown because too many files have changed in this diff Show More