powerpc/85xx: Rework P1022DS device tree

Utilize new split between board & SoC, and new SoC device trees split
into pre & post utilizing 'template' includes for SoC IP blocks.

Other changes include:

* Reworked PCIe nodes to allow supportin IRQs for controller (errors)
  and moved PCI device IRQs down to virtual bridge level
* Changed GPIO compatiable from 'fsl,mpc8572-gpio' to 'fsl,pq3-gpio' as the
  'mpc8572' compatiable is to deal with a 'mpc8572' specific to an erratum
* Updated spi node to new espi binding specification
* Renamed SDHC node from 'sdhci' to 'sdhc'
* Added usb node for 2nd usb controller
* Dropping "fsl,p1022-IP..." from compatibles for standard blocks
* Fixed bug in local bus range node for CS2, was maping to
  0x0 0x0xffa00000 instead of 0xf 0xffa00000
* Fixed localbus reg property should have been 0xf 0xffe05000

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Tested-by: Timur Tabi <timur@freescale.com>
This commit is contained in:
Kumar Gala 2011-10-26 01:01:54 -05:00
parent ffeb33d20c
commit ab827d97bd
3 changed files with 320 additions and 418 deletions

View File

@ -0,0 +1,235 @@
/*
* P1022/P1013 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
interrupts = <19 2 0 0>;
};
/* controller at 0x9000 */
&pci0 {
compatible = "fsl,p1022-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
>;
};
};
/* controller at 0xa000 */
&pci1 {
compatible = "fsl,p1022-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
>;
};
};
/* controller at 0xb000 */
&pci2 {
compatible = "fsl,p1022-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,p1022-immr", "simple-bus";
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
};
ecm@1000 {
compatible = "fsl,p1022-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <16 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,p1022-memory-controller";
reg = <0x2000 0x1000>;
interrupts = <16 2 0 0>;
};
/include/ "pq3-i2c-0.dtsi"
/include/ "pq3-i2c-1.dtsi"
/include/ "pq3-duart-0.dtsi"
/include/ "pq3-espi-0.dtsi"
spi@7000 {
fsl,espi-num-chipselects = <4>;
};
/include/ "pq3-dma-1.dtsi"
dma@c300 {
dma00: dma-channel@0 {
compatible = "fsl,ssi-dma-channel";
};
dma01: dma-channel@80 {
compatible = "fsl,ssi-dma-channel";
};
};
/include/ "pq3-gpio-0.dtsi"
display@10000 {
compatible = "fsl,diu", "fsl,p1022-diu";
reg = <0x10000 1000>;
interrupts = <64 2 0 0>;
};
ssi@15000 {
compatible = "fsl,mpc8610-ssi";
cell-index = <0>;
reg = <0x15000 0x100>;
interrupts = <75 2 0 0>;
fsl,playback-dma = <&dma00>;
fsl,capture-dma = <&dma01>;
fsl,fifo-depth = <15>;
};
/include/ "pq3-sata2-0.dtsi"
/include/ "pq3-sata2-1.dtsi"
L2: l2-cache-controller@20000 {
compatible = "fsl,p1022-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2,256K
interrupts = <16 2 0 0>;
};
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-usb2-dr-0.dtsi"
/include/ "pq3-usb2-dr-1.dtsi"
/include/ "pq3-esdhc-0.dtsi"
sdhc@2e000 {
fsl,sdhci-auto-cmd12;
};
/include/ "pq3-sec3.3-0.dtsi"
/include/ "pq3-mpic.dtsi"
/include/ "pq3-mpic-timer-B.dtsi"
/include/ "pq3-etsec2-0.dtsi"
enet0: enet0_grp2: ethernet@b0000 {
};
/include/ "pq3-etsec2-1.dtsi"
enet1: enet1_grp2: ethernet@b1000 {
};
global-utilities@e0000 {
compatible = "fsl,p1022-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
power@e0070{
compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
reg = <0xe0070 0x20>;
};
};
/include/ "pq3-etsec2-grp2-0.dtsi"
/include/ "pq3-etsec2-grp2-1.dtsi"

View File

@ -0,0 +1,68 @@
/*
* P1022/P1013 Silicon/SoC Device Tree Source (pre include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
/ {
compatible = "fsl,P1022";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
serial0 = &serial0;
serial1 = &serial1;
ethernet0 = &enet0;
ethernet1 = &enet1;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,P1022@0 {
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
};
PowerPC,P1022@1 {
device_type = "cpu";
reg = <0x1>;
next-level-cache = <&L2>;
};
};
};

View File

@ -8,55 +8,20 @@
* kind, whether express or implied.
*/
/dts-v1/;
/include/ "fsl/p1022si-pre.dtsi"
/ {
model = "fsl,P1022";
model = "fsl,P1022DS";
compatible = "fsl,P1022DS";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,P1022@0 {
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
};
PowerPC,P1022@1 {
device_type = "cpu";
reg = <0x1>;
next-level-cache = <&L2>;
};
};
memory {
device_type = "memory";
};
localbus@fffe05000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
reg = <0 0xffe05000 0 0x1000>;
interrupts = <19 2 0 0>;
lbc: localbus@fffe05000 {
reg = <0xf 0xffe05000 0 0x1000>;
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
0x2 0x0 0x0 0xffa00000 0x00040000
0x2 0x0 0xf 0xffa00000 0x00040000
0x3 0x0 0xf 0xffdf0000 0x00008000>;
nor@0,0 {
@ -161,51 +126,10 @@
};
};
soc@fffe00000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,p1022-immr", "simple-bus";
soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
};
ecm@1000 {
compatible = "fsl,p1022-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <16 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,p1022-memory-controller";
reg = <0x2000 0x1000>;
interrupts = <16 2 0 0>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <43 2 0 0>;
dfsrr;
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <43 2 0 0>;
dfsrr;
wm8776:codec@1a {
compatible = "wlf,wm8776";
reg = <0x1a>;
@ -216,41 +140,14 @@
};
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2 0 0>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2 0 0>;
};
spi@7000 {
cell-index = <0>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,espi";
reg = <0x7000 0x1000>;
interrupts = <59 0x2 0 0>;
espi,num-ss-bits = <4>;
mode = "cpu";
fsl_m25p80@0 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,espi-flash";
compatible = "spansion,s25sl12801";
reg = <0>;
linux,modalias = "fsl_m25p80";
spi-max-frequency = <40000000>; /* input clock */
partition@0 {
label = "u-boot-spi";
reg = <0x00000000 0x00100000>;
@ -274,115 +171,20 @@
};
ssi@15000 {
compatible = "fsl,mpc8610-ssi";
cell-index = <0>;
reg = <0x15000 0x100>;
interrupts = <75 2 0 0>;
fsl,mode = "i2s-slave";
codec-handle = <&wm8776>;
fsl,playback-dma = <&dma00>;
fsl,capture-dma = <&dma01>;
fsl,fifo-depth = <15>;
fsl,ssi-asynchronous;
};
dma@c300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,eloplus-dma";
reg = <0xc300 0x4>;
ranges = <0x0 0xc100 0x200>;
cell-index = <1>;
dma00: dma-channel@0 {
compatible = "fsl,ssi-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupts = <76 2 0 0>;
};
dma01: dma-channel@80 {
compatible = "fsl,ssi-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupts = <77 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupts = <78 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupts = <79 2 0 0>;
};
};
gpio: gpio-controller@f000 {
#gpio-cells = <2>;
compatible = "fsl,mpc8572-gpio";
reg = <0xf000 0x100>;
interrupts = <47 0x2 0 0>;
gpio-controller;
};
L2: l2-cache-controller@20000 {
compatible = "fsl,p1022-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2, 256K
interrupts = <16 2 0 0>;
};
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,eloplus-dma";
reg = <0x21300 0x4>;
ranges = <0x0 0x21100 0x200>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupts = <20 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupts = <21 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupts = <22 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupts = <23 2 0 0>;
};
};
usb@22000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl-usb2-dr";
reg = <0x22000 0x1000>;
interrupts = <28 0x2 0 0>;
phy_type = "ulpi";
};
mdio@24000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,etsec2-mdio";
reg = <0x24000 0x1000 0xb0030 0x4>;
usb@23000 {
status = "disabled";
};
mdio@24000 {
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x1>;
@ -393,187 +195,22 @@
};
};
mdio@25000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,etsec2-mdio";
reg = <0x25000 0x1000 0xb1030 0x4>;
};
enet0: ethernet@B0000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "fsl,etsec2";
fsl,num_rx_queues = <0x8>;
fsl,num_tx_queues = <0x8>;
fsl,magic-packet;
fsl,wake-on-filer;
local-mac-address = [ 00 00 00 00 00 00 ];
ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
queue-group@0{
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB0000 0x1000>;
interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
};
queue-group@1{
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB4000 0x1000>;
interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
};
};
enet1: ethernet@B1000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "fsl,etsec2";
fsl,num_rx_queues = <0x8>;
fsl,num_tx_queues = <0x8>;
local-mac-address = [ 00 00 00 00 00 00 ];
ethernet@b1000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
queue-group@0{
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB1000 0x1000>;
interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
};
queue-group@1{
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB5000 0x1000>;
interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
};
};
sdhci@2e000 {
compatible = "fsl,p1022-esdhc", "fsl,esdhc";
reg = <0x2e000 0x1000>;
interrupts = <72 0x2 0 0>;
fsl,sdhci-auto-cmd12;
/* Filled in by U-Boot */
clock-frequency = <0>;
};
crypto@30000 {
compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
"fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
"fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <45 2 0 0 58 2 0 0>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x97c>;
fsl,descriptor-types-mask = <0x3a30abf>;
};
sata@18000 {
compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
reg = <0x18000 0x1000>;
cell-index = <1>;
interrupts = <74 0x2 0 0>;
};
sata@19000 {
compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
reg = <0x19000 0x1000>;
cell-index = <2>;
interrupts = <41 0x2 0 0>;
};
power@e0070{
compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
reg = <0xe0070 0x20>;
};
display@10000 {
compatible = "fsl,diu", "fsl,p1022-diu";
reg = <0x10000 1000>;
interrupts = <64 2 0 0>;
};
timer@41100 {
compatible = "fsl,mpic-global-timer";
reg = <0x41100 0x100 0x41300 4>;
interrupts = <0 0 3 0
1 0 3 0
2 0 3 0
3 0 3 0>;
};
timer@42100 {
compatible = "fsl,mpic-global-timer";
reg = <0x42100 0x100 0x42300 4>;
interrupts = <4 0 3 0
5 0 3 0
6 0 3 0
7 0 3 0>;
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <4>;
reg = <0x40000 0x40000>;
compatible = "fsl,mpic";
device_type = "open-pic";
};
msi@41600 {
compatible = "fsl,p1022-msi", "fsl,mpic-msi";
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xe0 0 0 0
0xe1 0 0 0
0xe2 0 0 0
0xe3 0 0 0
0xe4 0 0 0
0xe5 0 0 0
0xe6 0 0 0
0xe7 0 0 0>;
};
global-utilities@e0000 { //global utilities block
compatible = "fsl,p1022-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
};
pci0: pcie@fffe09000 {
compatible = "fsl,p1022-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xf 0xffe09000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 4 1
0000 0 0 2 &mpic 5 1
0000 0 0 3 &mpic 6 1
0000 0 0 4 &mpic 7 1
>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@ -585,30 +222,11 @@
};
pci1: pcie@fffe0a000 {
compatible = "fsl,p1022-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xf 0xffe0a000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 0 1
0000 0 0 2 &mpic 1 1
0000 0 0 3 &mpic 2 1
0000 0 0 4 &mpic 3 1
>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@ -619,32 +237,11 @@
};
};
pci2: pcie@fffe0b000 {
compatible = "fsl,p1022-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xf 0xffe0b000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 8 1
0000 0 0 2 &mpic 9 1
0000 0 0 3 &mpic 10 1
0000 0 0 4 &mpic 11 1
>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@ -655,3 +252,5 @@
};
};
};
/include/ "fsl/p1022si-post.dtsi"