Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-01 17:51:43 +00:00
Code Issues Packages Projects Releases Wiki Activity

iwlwifi: run through spell checker

Browse Source 
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Tomas Winkler 2008-10-23 23:48:56 -07:00 committed by John W. Linville
parent 127901ab69
commit a96a27f97f
26 changed files with 91 additions and 92 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
drivers/net/wireless/iwlwifi/iwl-3945-commands.h
View File

@ -121,7 +121,7 @@ enum {
REPLY_TX_PWR_TABLE_CMD = 0x97,
MEASURE_ABORT_NOTIFICATION = 0x99, /* not used */
/* Bluetooth device coexistance config command */
/* Bluetooth device coexistence config command */
REPLY_BT_CONFIG = 0x9b,
/* Statistics */
@ -158,7 +158,7 @@ struct iwl3945_cmd_header {
u8 cmd; /* Command ID: REPLY_RXON, etc. */
u8 flags; /* IWL_CMD_* */
/*
* The driver sets up the sequence number to values of its chosing.
* The driver sets up the sequence number to values of its choosing.
* uCode does not use this value, but passes it back to the driver
* when sending the response to each driver-originated command, so
* the driver can match the response to the command. Since the values
@ -991,7 +991,7 @@ struct iwl3945_rate_scaling_cmd {
*
* 3945 and 4965 support hardware handshake with Bluetooth device on
* same platform. Bluetooth device alerts wireless device when it will Tx;
* wireless device can delay or kill its own Tx to accomodate.
* wireless device can delay or kill its own Tx to accommodate.
*/
struct iwl3945_bt_cmd {
u8 flags;

2
drivers/net/wireless/iwlwifi/iwl-3945-io.h
View File

@ -53,7 +53,7 @@
* _iwl3945_read32.)
*
* These declarations are *extremely* useful in quickly isolating code deltas
* which result in misconfiguring of the hardware I/O. In combination with
* which result in misconfiguration of the hardware I/O. In combination with
* git-bisect and the IO debug level you can quickly determine the specific
* commit which breaks the IO sequence to the hardware.
*

4
drivers/net/wireless/iwlwifi/iwl-3945.c
View File

@ -200,7 +200,7 @@ static int iwl3945_hwrate_to_plcp_idx(u8 plcp)
* priv->eeprom is used to determine if antenna AUX/MAIN are reversed
* priv->antenna specifies the antenna diversity mode:
*
* IWL_ANTENNA_DIVERISTY - NIC selects best antenna by itself
* IWL_ANTENNA_DIVERSITY - NIC selects best antenna by itself
* IWL_ANTENNA_MAIN - Force MAIN antenna
* IWL_ANTENNA_AUX - Force AUX antenna
*/
@ -1882,7 +1882,7 @@ static int iwl3945_hw_reg_comp_txpower_temp(struct iwl3945_priv *priv)
ref_temp = (s16)priv->eeprom.groups[ch_info->group_index].
temperature;
/* get power index adjustment based on curr and factory
/* get power index adjustment based on current and factory
* temps */
delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature,
ref_temp);

12
drivers/net/wireless/iwlwifi/iwl-4965-hw.h
View File

@ -71,7 +71,7 @@
#include "iwl-fh.h"
/* EERPROM */
/* EEPROM */
#define IWL4965_EEPROM_IMG_SIZE 1024
/*
@ -286,13 +286,13 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr)
* that target txpower.
*
*
* 3) Determine (EEPROM) calibration subband for the target channel, by
* comparing against first and last channels in each subband
* 3) Determine (EEPROM) calibration sub band for the target channel, by
* comparing against first and last channels in each sub band
* (see struct iwl4965_eeprom_calib_subband_info).
*
*
* 4) Linearly interpolate (EEPROM) factory calibration measurement sets,
* referencing the 2 factory-measured (sample) channels within the subband.
* referencing the 2 factory-measured (sample) channels within the sub band.
*
* Interpolation is based on difference between target channel's frequency
* and the sample channels' frequencies. Since channel numbers are based
@ -300,7 +300,7 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr)
* to interpolating based on channel number differences.
*
* Note that the sample channels may or may not be the channels at the
* edges of the subband. The target channel may be "outside" of the
* edges of the sub band. The target channel may be "outside" of the
* span of the sampled channels.
*
* Driver may choose the pair (for 2 Tx chains) of measurements (see
@ -344,7 +344,7 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr)
* "4965 temperature calculation".
*
* If current temperature is higher than factory temperature, driver must
* increase gain (lower gain table index), and vice versa.
* increase gain (lower gain table index), and vice verse.
*
* Temperature affects gain differently for different channels:
*

10
drivers/net/wireless/iwlwifi/iwl-4965.c
View File

@ -246,7 +246,7 @@ static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv)
iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG,
priv->ucode_data.len);
/* Inst bytecount must be last to set up, bit 31 signals uCode
/* Inst byte count must be last to set up, bit 31 signals uCode
* that all new ptr/size info is in place */
iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
priv->ucode_code.len | BSM_DRAM_INST_LOAD);
@ -324,7 +324,7 @@ static u16 iwl4965_eeprom_calib_version(struct iwl_priv *priv)
}
/*
* Activate/Deactivat Tx DMA/FIFO channels according tx fifos mask
* Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask
* must be called under priv->lock and mac access
*/
static void iwl4965_txq_set_sched(struct iwl_priv *priv, u32 mask)
@ -396,7 +396,7 @@ static void iwl4965_nic_config(struct iwl_priv *priv)
/* L1 is enabled by BIOS */
if ((link & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN)
/* diable L0S disabled L1A enabled */
/* disable L0S disabled L1A enabled */
iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
else
/* L0S enabled L1A disabled */
@ -625,7 +625,7 @@ static void iwl4965_bg_txpower_work(struct work_struct *work)
mutex_lock(&priv->mutex);
/* Regardless of if we are assocaited, we must reconfigure the
/* Regardless of if we are associated, we must reconfigure the
* TX power since frames can be sent on non-radar channels while
* not associated */
iwl4965_send_tx_power(priv);
@ -2019,7 +2019,7 @@ static inline u32 iwl4965_get_scd_ssn(struct iwl4965_tx_resp *tx_resp)
}
/**
* iwl4965_tx_status_reply_tx - Handle Tx rspnse for frames in aggregation queue
* iwl4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue
*/
static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv,
struct iwl_ht_agg *agg,

2
drivers/net/wireless/iwlwifi/iwl-5000-hw.h
View File

@ -73,7 +73,7 @@
#define IWL50_RTC_INST_SIZE (IWL50_RTC_INST_UPPER_BOUND - RTC_INST_LOWER_BOUND)
#define IWL50_RTC_DATA_SIZE (IWL50_RTC_DATA_UPPER_BOUND - RTC_DATA_LOWER_BOUND)
/* EERPROM */
/* EEPROM */
#define IWL_5000_EEPROM_IMG_SIZE 2048
#define IWL50_CMD_FIFO_NUM 7

10
drivers/net/wireless/iwlwifi/iwl-5000.c
View File

@ -94,7 +94,7 @@ static int iwl5000_apm_init(struct iwl_priv *priv)
iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
/* Set FH wait treshold to maximum (HW error during stress W/A) */
/* Set FH wait threshold to maximum (HW error during stress W/A) */
iwl_set_bit(priv, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL);
/* enable HAP INTA to move device L1a -> L0s */
@ -134,7 +134,7 @@ static int iwl5000_apm_init(struct iwl_priv *priv)
return ret;
}
/* FIXME: this is indentical to 4965 */
/* FIXME: this is identical to 4965 */
static void iwl5000_apm_stop(struct iwl_priv *priv)
{
unsigned long flags;
@ -219,7 +219,7 @@ static void iwl5000_nic_config(struct iwl_priv *priv)
/* L1 is enabled by BIOS */
if ((link & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN)
/* diable L0S disabled L1A enabled */
/* disable L0S disabled L1A enabled */
iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
else
/* L0S enabled L1A disabled */
@ -1093,7 +1093,7 @@ static u16 iwl5000_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
/*
* Activate/Deactivat Tx DMA/FIFO channels according tx fifos mask
* Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask
* must be called under priv->lock and mac access
*/
static void iwl5000_txq_set_sched(struct iwl_priv *priv, u32 mask)
@ -1311,7 +1311,7 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv,
IWL_ERROR("TODO: Implement Tx ABORT REQUIRED!!!\n");
}
/* Currently 5000 is the supperset of everything */
/* Currently 5000 is the superset of everything */
static u16 iwl5000_get_hcmd_size(u8 cmd_id, u16 len)
{
return len;

4
drivers/net/wireless/iwlwifi/iwl-agn-rs.c
View File

@ -188,7 +188,7 @@ static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
* 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
* "G" is the only table that supports CCK (the first 4 rates).
*/
/*FIXME:RS:need to spearate tables for MIMO2/MIMO3*/
/*FIXME:RS:need to separate tables for MIMO2/MIMO3*/
static s32 expected_tpt_A[IWL_RATE_COUNT] = {
0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186, 186
};
@ -2253,7 +2253,7 @@ static void rs_rate_init(void *priv_r, struct ieee80211_supported_band *sband,
lq_sta->active_mimo2_rate,
lq_sta->active_mimo3_rate);
/* These values will be overriden later */
/* These values will be overridden later */
lq_sta->lq.general_params.single_stream_ant_msk = ANT_A;
lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB;

2
drivers/net/wireless/iwlwifi/iwl-agn-rs.h
View File

@ -229,7 +229,7 @@ enum {
#define IWL_MIMO2_SWITCH_SISO_C 4
#define IWL_MIMO2_SWITCH_GI 5
/*FIXME:RS:add posible acctions for MIMO3*/
/*FIXME:RS:add possible actions for MIMO3*/
#define IWL_ACTION_LIMIT 3 /* # possible actions */

2
drivers/net/wireless/iwlwifi/iwl-agn.c
View File

@ -1484,7 +1484,7 @@ static void iwl4965_enable_interrupts(struct iwl_priv *priv)
/* call this function to flush any scheduled tasklet */
static inline void iwl_synchronize_irq(struct iwl_priv *priv)
{
/* wait to make sure we flush pedding tasklet*/
/* wait to make sure we flush pending tasklet*/
synchronize_irq(priv->pci_dev->irq);
tasklet_kill(&priv->irq_tasklet);
}

28
drivers/net/wireless/iwlwifi/iwl-commands.h
View File

@ -134,7 +134,7 @@ enum {
REPLY_TX_POWER_DBM_CMD = 0x98,
MEASURE_ABORT_NOTIFICATION = 0x99, /* not used */
/* Bluetooth device coexistance config command */
/* Bluetooth device coexistence config command */
REPLY_BT_CONFIG = 0x9b,
/* Statistics */
@ -185,7 +185,7 @@ struct iwl_cmd_header {
u8 cmd; /* Command ID: REPLY_RXON, etc. */
u8 flags; /* 0:5 reserved, 6 abort, 7 internal */
/*
* The driver sets up the sequence number to values of its chosing.
* The driver sets up the sequence number to values of its choosing.
* uCode does not use this value, but passes it back to the driver
* when sending the response to each driver-originated command, so
* the driver can match the response to the command. Since the values
@ -347,7 +347,7 @@ struct iwl4965_tx_power_db {
} __attribute__ ((packed));
/**
* Commad REPLY_TX_POWER_DBM_CMD = 0x98
* Command REPLY_TX_POWER_DBM_CMD = 0x98
* struct iwl5000_tx_power_dbm_cmd
*/
#define IWL50_TX_POWER_AUTO 0x7f
@ -383,7 +383,7 @@ struct iwl5000_tx_power_dbm_cmd {
* calculating txpower settings:
*
* 1) Power supply voltage indication. The voltage sensor outputs higher
* values for lower voltage, and vice versa.
* values for lower voltage, and vice verse.
*
* 2) Temperature measurement parameters, for each of two channel widths
* (20 MHz and 40 MHz) supported by the radios. Temperature sensing
@ -622,7 +622,7 @@ struct iwl4965_rxon_cmd {
u8 ofdm_ht_dual_stream_basic_rates;
} __attribute__ ((packed));
/* 5000 HW just extend this cmmand */
/* 5000 HW just extend this command */
struct iwl_rxon_cmd {
u8 node_addr[6];
__le16 reserved1;
@ -1113,7 +1113,7 @@ struct iwl4965_rx_non_cfg_phy {
#define IWL50_OFDM_RSSI_C_BIT_POS 0
struct iwl5000_non_cfg_phy {
__le32 non_cfg_phy[IWL50_RX_RES_PHY_CNT]; /* upto 8 phy entries */
__le32 non_cfg_phy[IWL50_RX_RES_PHY_CNT]; /* up to 8 phy entries */
} __attribute__ ((packed));
@ -1169,7 +1169,7 @@ struct iwl4965_rx_mpdu_res_start {
/* REPLY_TX Tx flags field */
/* 1: Use RTS/CTS protocol or CTS-to-self if spec alows it
/* 1: Use RTS/CTS protocol or CTS-to-self if spec allows it
* before this frame. if CTS-to-self required check
* RXON_FLG_SELF_CTS_EN status. */
#define TX_CMD_FLG_RTS_CTS_MSK __constant_cpu_to_le32(1 << 0)
@ -1529,7 +1529,7 @@ struct iwl4965_tx_resp {
/*
* definitions for initial rate index field
* bits [3:0] inital rate index
* bits [3:0] initial rate index
* bits [6:4] rate table color, used for the initial rate
* bit-7 invalid rate indication
* i.e. rate was not chosen from rate table
@ -1768,7 +1768,7 @@ struct iwl_link_qual_agg_params {
* match the modulation characteristics of the history set.
*
* When using block-ack (aggregation), all frames are transmitted at the same
* rate, since there is no per-attempt acknowledgement from the destination
* rate, since there is no per-attempt acknowledgment from the destination
* station. The Tx response struct iwl_tx_resp indicates the Tx rate in
* rate_n_flags field. After receiving a block-ack, the driver can update
* history for the entire block all at once.
@ -1907,7 +1907,7 @@ struct iwl_link_quality_cmd {
*
* 3945 and 4965 support hardware handshake with Bluetooth device on
* same platform. Bluetooth device alerts wireless device when it will Tx;
* wireless device can delay or kill its own Tx to accomodate.
* wireless device can delay or kill its own Tx to accommodate.
*/
struct iwl4965_bt_cmd {
u8 flags;
@ -2069,7 +2069,7 @@ struct iwl4965_spectrum_notification {
* '11' Illegal set
*
* NOTE: if sleep_interval[SLEEP_INTRVL_TABLE_SIZE-1] > DTIM period then
* ucode assume sleep over DTIM is allowed and we don't need to wakeup
* ucode assume sleep over DTIM is allowed and we don't need to wake up
* for every DTIM.
*/
#define IWL_POWER_VEC_SIZE 5
@ -3017,11 +3017,11 @@ struct iwl_wimax_coex_event_entry {
/* COEX flag masks */
/* Staion table is valid */
/* Station table is valid */
#define COEX_FLAGS_STA_TABLE_VALID_MSK (0x1)
/* UnMask wakeup src at unassociated sleep */
/* UnMask wake up src at unassociated sleep */
#define COEX_FLAGS_UNASSOC_WA_UNMASK_MSK (0x4)
/* UnMask wakeup src at associated sleep */
/* UnMask wake up src at associated sleep */
#define COEX_FLAGS_ASSOC_WA_UNMASK_MSK (0x8)
/* Enable CoEx feature. */
#define COEX_FLAGS_COEX_ENABLE_MSK (0x80)

2
drivers/net/wireless/iwlwifi/iwl-core.c
View File

@ -747,7 +747,7 @@ static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
break;
case WLAN_HT_CAP_SM_PS_INVALID:
default:
IWL_ERROR("invalide mimo ps mode %d\n",
IWL_ERROR("invalid mimo ps mode %d\n",
priv->current_ht_config.sm_ps);
WARN_ON(1);
idle_cnt = -1;

2
drivers/net/wireless/iwlwifi/iwl-core.h
View File

@ -100,7 +100,7 @@ struct iwl_hcmd_utils_ops {
};
struct iwl_lib_ops {
/* set hw dependant perameters */
/* set hw dependent parameters */
int (*set_hw_params)(struct iwl_priv *priv);
/* ucode shared memory */
int (*alloc_shared_mem)(struct iwl_priv *priv);

7
drivers/net/wireless/iwlwifi/iwl-debug.h
View File

@ -101,13 +101,12 @@ static inline void iwl_dbgfs_unregister(struct iwl_priv *priv)
*
* To add your debug level to the list of levels seen when you perform
*
* % cat /proc/net/iwl/debug_level
* % cat /sys/class/net/wlanX/device/debug_level
*
* you simply need to add your entry to the iwl_debug_levels array.
*
* If you do not see debug_level in /proc/net/iwl then you do not have
* CONFIG_IWLWIFI_DEBUG defined in your kernel configuration
*
* If you do not see debug_level in /sys/class/net/wlanX/device/debug_level
* then you do not have CONFIG_IWLWIFI_DEBUG defined in your kernel config file
*/
#define IWL_DL_INFO (1 << 0)

4
drivers/net/wireless/iwlwifi/iwl-dev.h
View File

@ -518,7 +518,7 @@ struct iwl_sensitivity_ranges {
* @sw_crypto: 0 for hw, 1 for sw
* @max_xxx_size: for ucode uses
* @ct_kill_threshold: temperature threshold
* @calib_init_cfg: setup initial claibrations for the hw
* @calib_init_cfg: setup initial calibrations for the hw
* @struct iwl_sensitivity_ranges: range of sensitivity values
*/
struct iwl_hw_params {
@ -911,7 +911,7 @@ struct iwl_priv {
unsigned long status;
int last_rx_rssi; /* From Rx packet statisitics */
int last_rx_rssi; /* From Rx packet statistics */
int last_rx_noise; /* From beacon statistics */
/* counts mgmt, ctl, and data packets */

2
drivers/net/wireless/iwlwifi/iwl-eeprom.c
View File

@ -291,7 +291,7 @@ int iwl_eeprom_check_version(struct iwl_priv *priv)
return 0;
err:
IWL_ERROR("Unsuported EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n",
IWL_ERROR("Unsupported EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n",
eeprom_ver, priv->cfg->eeprom_ver,
calib_ver, priv->cfg->eeprom_calib_ver);
return -EINVAL;

2
drivers/net/wireless/iwlwifi/iwl-io.h
View File

@ -55,7 +55,7 @@
* _iwl_read32.)
*
* These declarations are *extremely* useful in quickly isolating code deltas
* which result in misconfiguring of the hardware I/O. In combination with
* which result in misconfiguration of the hardware I/O. In combination with
* git-bisect and the IO debug level you can quickly determine the specific
* commit which breaks the IO sequence to the hardware.
*

2
drivers/net/wireless/iwlwifi/iwl-led.c
View File

@ -278,7 +278,7 @@ static int iwl_get_blink_rate(struct iwl_priv *priv)
/* FIXME: + priv->rx_stats[2].bytes; */
s64 tpt = current_tpt - priv->led_tpt;
if (tpt < 0) /* wrapparound */
if (tpt < 0) /* wraparound */
tpt = -tpt;
IWL_DEBUG_LED("tpt %lld current_tpt %llu\n",

18
drivers/net/wireless/iwlwifi/iwl-power.c
View File

@ -80,7 +80,7 @@
#define IWL_REDUCED_POWER_TEMPERATURE 95
/* default power management (not Tx power) table values */
/* for tim 0-10 */
/* for TIM 0-10 */
static struct iwl_power_vec_entry range_0[IWL_POWER_MAX] = {
{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
@ -91,7 +91,7 @@ static struct iwl_power_vec_entry range_0[IWL_POWER_MAX] = {
};
/* for tim = 3-10 */
/* for TIM = 3-10 */
static struct iwl_power_vec_entry range_1[IWL_POWER_MAX] = {
{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
@ -101,7 +101,7 @@ static struct iwl_power_vec_entry range_1[IWL_POWER_MAX] = {
{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 7, 10, 10)}, 2}
};
/* for tim > 11 */
/* for TIM > 11 */
static struct iwl_power_vec_entry range_2[IWL_POWER_MAX] = {
{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
@ -183,7 +183,7 @@ static int iwl_power_init_handle(struct iwl_priv *priv)
return 0;
}
/* adjust power command according to dtim period and power level*/
/* adjust power command according to DTIM period and power level*/
static int iwl_update_power_command(struct iwl_priv *priv,
struct iwl_powertable_cmd *cmd,
u16 mode)
@ -325,7 +325,7 @@ int iwl_power_update_mode(struct iwl_priv *priv, bool force)
EXPORT_SYMBOL(iwl_power_update_mode);
/* Allow other iwl code to disable/enable power management active
* this will be usefull for rate scale to disable PM during heavy
* this will be useful for rate scale to disable PM during heavy
* Tx/Rx activities
*/
int iwl_power_disable_management(struct iwl_priv *priv, u32 ms)
@ -352,8 +352,8 @@ int iwl_power_disable_management(struct iwl_priv *priv, u32 ms)
EXPORT_SYMBOL(iwl_power_disable_management);
/* Allow other iwl code to disable/enable power management active
* this will be usefull for rate scale to disable PM during hight
* valume activities
* this will be useful for rate scale to disable PM during high
* volume activities
*/
int iwl_power_enable_management(struct iwl_priv *priv)
{
@ -391,7 +391,7 @@ int iwl_power_set_system_mode(struct iwl_priv *priv, u16 mode)
}
EXPORT_SYMBOL(iwl_power_set_system_mode);
/* initilize to default */
/* initialize to default */
void iwl_power_initialize(struct iwl_priv *priv)
{
@ -443,7 +443,7 @@ static void iwl_bg_set_power_save(struct work_struct *work)
mutex_lock(&priv->mutex);
/* on starting association we disable power managment
/* on starting association we disable power management
* until association, if association failed then this
* timer will expire and enable PM again.
*/

6
drivers/net/wireless/iwlwifi/iwl-prph.h
View File

@ -158,9 +158,9 @@
*
* 4) Point (via BSM_DRAM_*) to the "runtime" uCode data and instruction
* images in host DRAM. The last register loaded must be the instruction
* bytecount register ("1" in MSbit tells initialization uCode to load
* byte count register ("1" in MSbit tells initialization uCode to load
* the runtime uCode):
* BSM_DRAM_INST_BYTECOUNT_REG = bytecount | BSM_DRAM_INST_LOAD
* BSM_DRAM_INST_BYTECOUNT_REG = byte count | BSM_DRAM_INST_LOAD
*
* 5) Wait for "alive" notification, then issue normal runtime commands.
*
@ -244,7 +244,7 @@
/**
* Tx Scheduler
*
* The Tx Scheduler selects the next frame to be transmitted, chosing TFDs
* The Tx Scheduler selects the next frame to be transmitted, choosing TFDs
* (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in
* host DRAM. It steers each frame's Tx command (which contains the frame
* data) into one of up to 7 prioritized Tx DMA FIFO channels within the

8
drivers/net/wireless/iwlwifi/iwl-rfkill.c
View File

@ -64,7 +64,7 @@ static int iwl_rfkill_soft_rf_kill(void *data, enum rfkill_state state)
iwl_radio_kill_sw_disable_radio(priv);
break;
default:
IWL_WARNING("we recieved unexpected RFKILL state %d\n", state);
IWL_WARNING("we received unexpected RFKILL state %d\n", state);
break;
}
out_unlock:
@ -83,7 +83,7 @@ int iwl_rfkill_init(struct iwl_priv *priv)
IWL_DEBUG_RF_KILL("Initializing RFKILL.\n");
priv->rfkill = rfkill_allocate(device, RFKILL_TYPE_WLAN);
if (!priv->rfkill) {
IWL_ERROR("Unable to allocate rfkill device.\n");
IWL_ERROR("Unable to allocate RFKILL device.\n");
ret = -ENOMEM;
goto error;
}
@ -99,7 +99,7 @@ int iwl_rfkill_init(struct iwl_priv *priv)
ret = rfkill_register(priv->rfkill);
if (ret) {
IWL_ERROR("Unable to register rfkill: %d\n", ret);
IWL_ERROR("Unable to register RFKILL: %d\n", ret);
goto free_rfkill;
}
@ -127,7 +127,7 @@ void iwl_rfkill_unregister(struct iwl_priv *priv)
}
EXPORT_SYMBOL(iwl_rfkill_unregister);
/* set rf-kill to the right state. */
/* set RFKILL to the right state. */
void iwl_rfkill_set_hw_state(struct iwl_priv *priv)
{
if (!priv->rfkill)

8
drivers/net/wireless/iwlwifi/iwl-rx.c
View File

@ -407,7 +407,7 @@ int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
(priv->shared_phys + priv->rb_closed_offset) >> 4);
/* Enable Rx DMA
* FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set becuase of HW bug in
* FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set because of HW bug in
* the credit mechanism in 5000 HW RX FIFO
* Direct rx interrupts to hosts
* Rx buffer size 4 or 8k
@ -1149,7 +1149,7 @@ void iwl_rx_reply_rx(struct iwl_priv *priv,
priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
/* Set "1" to report good data frames in groups of 100 */
/* FIXME: need to optimze the call: */
/* FIXME: need to optimize the call: */
iwl_dbg_report_frame(priv, pkt, header, 1);
IWL_DEBUG_STATS_LIMIT("Rssi %d, noise %d, qual %d, TSF %llu\n",
@ -1160,12 +1160,12 @@ void iwl_rx_reply_rx(struct iwl_priv *priv,
* "antenna number"
*
* It seems that the antenna field in the phy flags value
* is actually a bitfield. This is undefined by radiotap,
* is actually a bit field. This is undefined by radiotap,
* it wants an actual antenna number but I always get "7"
* for most legacy frames I receive indicating that the
* same frame was received on all three RX chains.
*
* I think this field should be removed in favour of a
* I think this field should be removed in favor of a
* new 802.11n radiotap field "RX chains" that is defined
* as a bitmask.
*/

2
drivers/net/wireless/iwlwifi/iwl-scan.c
View File

@ -654,7 +654,7 @@ static void iwl_bg_request_scan(struct work_struct *data)
goto done;
}
/* Make sure the scan wasn't cancelled before this queued work
/* Make sure the scan wasn't canceled before this queued work
* was given the chance to run... */
if (!test_bit(STATUS_SCANNING, &priv->status))
goto done;

6
drivers/net/wireless/iwlwifi/iwl-sta.c
View File

@ -693,7 +693,7 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv,
/* else, we are overriding an existing key => no need to allocated room
* in uCode. */
/* This copy is acutally not needed: we get the key with each TX */
/* This copy is actually not needed: we get the key with each TX */
memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, 16);
memcpy(priv->stations[sta_id].sta.key.key, keyconf->key, 16);
@ -788,7 +788,7 @@ static void iwl_dump_lq_cmd(struct iwl_priv *priv,
{
int i;
IWL_DEBUG_RATE("lq station id 0x%x\n", lq->sta_id);
IWL_DEBUG_RATE("lq dta 0x%X 0x%X\n",
IWL_DEBUG_RATE("lq ant 0x%X 0x%X\n",
lq->general_params.single_stream_ant_msk,
lq->general_params.dual_stream_ant_msk);
@ -890,7 +890,7 @@ static void iwl_sta_init_lq(struct iwl_priv *priv, const u8 *addr, int is_ap)
* iwl_rxon_add_station - add station into station table.
*
* there is only one AP station with id= IWL_AP_ID
* NOTE: mutex must be held before calling this fnction
* NOTE: mutex must be held before calling this function
*/
int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap)
{

4
drivers/net/wireless/iwlwifi/iwl-tx.c
View File

@ -524,7 +524,7 @@ EXPORT_SYMBOL(iwl_hw_txq_ctx_free);
/**
* iwl_txq_ctx_reset - Reset TX queue context
* Destroys all DMA structures and initialise them again
* Destroys all DMA structures and initialize them again
*
* @param priv
* @return error code
@ -764,7 +764,7 @@ static void iwl_tx_cmd_build_hwcrypto(struct iwl_priv *priv,
memcpy(tx_cmd->key, keyconf->key, keyconf->keylen);
if (info->flags & IEEE80211_TX_CTL_AMPDU)
tx_cmd->tx_flags |= TX_CMD_FLG_AGG_CCMP_MSK;
IWL_DEBUG_TX("tx_cmd with aes hwcrypto\n");
IWL_DEBUG_TX("tx_cmd with AES hwcrypto\n");
break;
case ALG_TKIP:

28
drivers/net/wireless/iwlwifi/iwl3945-base.c
View File

@ -1805,7 +1805,7 @@ static void iwl3945_activate_qos(struct iwl3945_priv *priv, u8 force)
spin_unlock_irqrestore(&priv->lock, flags);
if (force || iwl3945_is_associated(priv)) {
IWL_DEBUG_QOS("send QoS cmd with Qos active %d \n",
IWL_DEBUG_QOS("send QoS cmd with QoS active %d \n",
priv->qos_data.qos_active);
iwl3945_send_qos_params_command(priv,
@ -1829,7 +1829,7 @@ static void iwl3945_activate_qos(struct iwl3945_priv *priv, u8 force)
/* default power management (not Tx power) table values */
/* for tim 0-10 */
/* for TIM 0-10 */
static struct iwl3945_power_vec_entry range_0[IWL_POWER_AC] = {
{{NOSLP, SLP_TIMEOUT(0), SLP_TIMEOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
{{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
@ -1839,7 +1839,7 @@ static struct iwl3945_power_vec_entry range_0[IWL_POWER_AC] = {
{{SLP, SLP_TIMEOUT(25), SLP_TIMEOUT(25), SLP_VEC(4, 7, 10, 10, 10)}, 1}
};
/* for tim > 10 */
/* for TIM > 10 */
static struct iwl3945_power_vec_entry range_1[IWL_POWER_AC] = {
{{NOSLP, SLP_TIMEOUT(0), SLP_TIMEOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
{{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(500),
@ -2282,7 +2282,7 @@ static int iwl3945_set_mode(struct iwl3945_priv *priv, int mode)
iwl3945_clear_stations_table(priv);
/* dont commit rxon if rf-kill is on*/
/* don't commit rxon if rf-kill is on*/
if (!iwl3945_is_ready_rf(priv))
return -EAGAIN;
@ -2311,7 +2311,7 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv *priv,
case ALG_CCMP:
cmd->cmd.tx.sec_ctl = TX_CMD_SEC_CCM;
memcpy(cmd->cmd.tx.key, keyinfo->key, keyinfo->keylen);
IWL_DEBUG_TX("tx_cmd with aes hwcrypto\n");
IWL_DEBUG_TX("tx_cmd with AES hwcrypto\n");
break;
case ALG_TKIP:
@ -4002,7 +4002,7 @@ static void iwl3945_enable_interrupts(struct iwl3945_priv *priv)
/* call this function to flush any scheduled tasklet */
static inline void iwl_synchronize_irq(struct iwl3945_priv *priv)
{
/* wait to make sure we flush pedding tasklet*/
/* wait to make sure we flush pending tasklet*/
synchronize_irq(priv->pci_dev->irq);
tasklet_kill(&priv->irq_tasklet);
}
@ -5559,7 +5559,7 @@ static int iwl3945_set_ucode_ptrs(struct iwl3945_priv *priv)
iwl3945_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG,
priv->ucode_data.len);
/* Inst bytecount must be last to set up, bit 31 signals uCode
/* Inst byte count must be last to set up, bit 31 signals uCode
* that all new ptr/size info is in place */
iwl3945_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
priv->ucode_code.len | BSM_DRAM_INST_LOAD);
@ -5651,7 +5651,7 @@ static void iwl3945_alive_start(struct iwl3945_priv *priv)
rc = iwl3945_grab_nic_access(priv);
if (rc) {
IWL_WARNING("Can not read rfkill status from adapter\n");
IWL_WARNING("Can not read RFKILL status from adapter\n");
return;
}
@ -5661,7 +5661,7 @@ static void iwl3945_alive_start(struct iwl3945_priv *priv)
if (rfkill & 0x1) {
clear_bit(STATUS_RF_KILL_HW, &priv->status);
/* if rfkill is not on, then wait for thermal
/* if RFKILL is not on, then wait for thermal
* sensor in adapter to kick in */
while (iwl3945_hw_get_temperature(priv) == 0) {
thermal_spin++;
@ -5855,7 +5855,7 @@ static int __iwl3945_up(struct iwl3945_priv *priv)
}
if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
IWL_ERROR("ucode not available for device bringup\n");
IWL_ERROR("ucode not available for device bring up\n");
return -EIO;
}
@ -6065,7 +6065,7 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
goto done;
}
/* Make sure the scan wasn't cancelled before this queued work
/* Make sure the scan wasn't canceled before this queued work
* was given the chance to run... */
if (!test_bit(STATUS_SCANNING, &priv->status))
goto done;
@ -7728,7 +7728,7 @@ static DEVICE_ATTR(dump_events, S_IWUSR, NULL, dump_event_log);
/*****************************************************************************
*
* driver setup and teardown
* driver setup and tear down
*
*****************************************************************************/
@ -8157,7 +8157,7 @@ static int iwl3945_rfkill_soft_rf_kill(void *data, enum rfkill_state state)
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return 0;
IWL_DEBUG_RF_KILL("we recieved soft RFKILL set to state %d\n", state);
IWL_DEBUG_RF_KILL("we received soft RFKILL set to state %d\n", state);
mutex_lock(&priv->mutex);
switch (state) {
@ -8172,7 +8172,7 @@ static int iwl3945_rfkill_soft_rf_kill(void *data, enum rfkill_state state)
iwl3945_radio_kill_sw(priv, 1);
break;
default:
IWL_WARNING("we recieved unexpected RFKILL state %d\n", state);
IWL_WARNING("we received unexpected RFKILL state %d\n", state);
break;
}
out_unlock: