usb: dwc3: pci: add quirk for Baytrails

On some BYT platforms the USB2 PHY needs to be put into
operational mode by the controller driver with GPIOs
controlling the PHYs reset and cs signals.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This commit is contained in:
Heikki Krogerus 2015-05-13 15:26:50 +03:00 committed by Felipe Balbi
parent 3e10a2ce98
commit a89d977cc0

View File

@ -21,6 +21,8 @@
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/gpio/consumer.h>
#include <linux/acpi.h>
#include "platform_data.h"
@ -31,6 +33,15 @@
#define PCI_DEVICE_ID_INTEL_SPTLP 0x9d30
#define PCI_DEVICE_ID_INTEL_SPTH 0xa130
static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
static const struct acpi_gpio_params cs_gpios = { 1, 0, false };
static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = {
{ "reset-gpios", &reset_gpios, 1 },
{ "cs-gpios", &cs_gpios, 1 },
{ },
};
static int dwc3_pci_quirks(struct pci_dev *pdev)
{
if (pdev->vendor == PCI_VENDOR_ID_AMD &&
@ -65,6 +76,30 @@ static int dwc3_pci_quirks(struct pci_dev *pdev)
sizeof(pdata));
}
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
struct gpio_desc *gpio;
acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
acpi_dwc3_byt_gpios);
/* These GPIOs will turn on the USB2 PHY */
gpio = gpiod_get(&pdev->dev, "cs");
if (!IS_ERR(gpio)) {
gpiod_direction_output(gpio, 0);
gpiod_set_value_cansleep(gpio, 1);
gpiod_put(gpio);
}
gpio = gpiod_get(&pdev->dev, "reset");
if (!IS_ERR(gpio)) {
gpiod_direction_output(gpio, 0);
gpiod_set_value_cansleep(gpio, 1);
gpiod_put(gpio);
usleep_range(10000, 11000);
}
}
return 0;
}
@ -128,6 +163,7 @@ err:
static void dwc3_pci_remove(struct pci_dev *pci)
{
acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pci->dev));
platform_device_unregister(pci_get_drvdata(pci));
}