From 9b06fc39084e161da84a399b6b5dc524e673f51e Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 29 Apr 2020 15:58:10 -0500 Subject: [PATCH 01/16] ARM: vexpress: Move vexpress_flags_set() into arch code vexpress_flags_set() is only used by the platform SMP related code and has nothing to do with the vexpress-sysreg MFD driver other than both access the same h/w block. It's also only needed for 32-bit systems and must be built-in for them. Let's move vexpress_flags_set() closer to where it is being used. This will allow for vexpress-sysreg to be built as a module. Cc: Lorenzo Pieralisi Cc: Linus Walleij Reviewed-by: Sudeep Holla Acked-by: Arnd Bergmann Acked-by: Liviu Dudau Acked-by: Lee Jones Signed-off-by: Rob Herring --- arch/arm/mach-vexpress/Kconfig | 1 - arch/arm/mach-vexpress/core.h | 1 + arch/arm/mach-vexpress/dcscb.c | 1 + arch/arm/mach-vexpress/v2m.c | 23 +++++++++++++++++++++++ drivers/mfd/vexpress-sysreg.c | 19 ------------------- include/linux/vexpress.h | 4 ---- 6 files changed, 25 insertions(+), 24 deletions(-) diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 726a68085c3b..18951cd20d9d 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -22,7 +22,6 @@ menuconfig ARCH_VEXPRESS select REGULATOR_FIXED_VOLTAGE if REGULATOR select VEXPRESS_CONFIG select VEXPRESS_SYSCFG - select MFD_VEXPRESS_SYSREG help This option enables support for systems using Cortex processor based ARM core and logic (FPGA) tiles on the Versatile Express motherboard, diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h index f4a7519084f1..bda78675c55d 100644 --- a/arch/arm/mach-vexpress/core.h +++ b/arch/arm/mach-vexpress/core.h @@ -1,3 +1,4 @@ bool vexpress_smp_init_ops(void); +void vexpress_flags_set(u32 data); extern const struct smp_operations vexpress_smp_dt_ops; diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c index 46a903c88c6a..a0554d7d04f7 100644 --- a/arch/arm/mach-vexpress/dcscb.c +++ b/arch/arm/mach-vexpress/dcscb.c @@ -20,6 +20,7 @@ #include #include +#include "core.h" #define RST_HOLD0 0x0 #define RST_HOLD1 0x4 diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 95886b3bb9dd..ffe7c7a85ae9 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -1,8 +1,31 @@ // SPDX-License-Identifier: GPL-2.0 +#include +#include #include #include "core.h" +#define SYS_FLAGSSET 0x030 +#define SYS_FLAGSCLR 0x034 + +void vexpress_flags_set(u32 data) +{ + static void __iomem *base; + + if (!base) { + struct device_node *node = of_find_compatible_node(NULL, NULL, + "arm,vexpress-sysreg"); + + base = of_iomap(node, 0); + } + + if (WARN_ON(!base)) + return; + + writel(~0, base + SYS_FLAGSCLR); + writel(data, base + SYS_FLAGSSET); +} + static const char * const v2m_dt_match[] __initconst = { "arm,vexpress", NULL, diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c index c68ff56dbdb1..0b9cc67706c7 100644 --- a/drivers/mfd/vexpress-sysreg.c +++ b/drivers/mfd/vexpress-sysreg.c @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include @@ -42,24 +41,6 @@ #define SYS_MISC_MASTERSITE (1 << 14) -void vexpress_flags_set(u32 data) -{ - static void __iomem *base; - - if (!base) { - struct device_node *node = of_find_compatible_node(NULL, NULL, - "arm,vexpress-sysreg"); - - base = of_iomap(node, 0); - } - - if (WARN_ON(!base)) - return; - - writel(~0, base + SYS_FLAGSCLR); - writel(data, base + SYS_FLAGSSET); -} - /* The sysreg block is just a random collection of various functions... */ static struct syscon_platform_data vexpress_sysreg_sys_id_pdata = { diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h index 0e130b5077a5..2ec7992b054c 100644 --- a/include/linux/vexpress.h +++ b/include/linux/vexpress.h @@ -40,8 +40,4 @@ struct device *vexpress_config_bridge_register(struct device *parent, struct regmap *devm_regmap_init_vexpress_config(struct device *dev); -/* Platform control */ - -void vexpress_flags_set(u32 data); - #endif From 6aec54a649576e59d20c7ed0b3f000b8b5dff56b Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 29 Apr 2020 15:58:11 -0500 Subject: [PATCH 02/16] arm64: vexpress: Don't select CONFIG_POWER_RESET_VEXPRESS The VExpress power-off/reset driver is not needed on 64-bit platforms as PSCI power-off and reset can be used instead. Stop selecting it so it can be disabled and not always built-in. CONFIG_VEXPRESS_CONFIG can also be dropped as it was a dependency for CONFIG_POWER_RESET_VEXPRESS. Cc: Catalin Marinas Cc: Will Deacon Cc: Lorenzo Pieralisi Cc: Linus Walleij Reviewed-by: Sudeep Holla Acked-by: Arnd Bergmann Acked-by: Liviu Dudau Signed-off-by: Rob Herring --- arch/arm64/Kconfig.platforms | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 55d70cfe0f9e..5c38dc56b808 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -278,8 +278,6 @@ config ARCH_VEXPRESS select GPIOLIB select PM select PM_GENERIC_DOMAINS - select POWER_RESET_VEXPRESS - select VEXPRESS_CONFIG help This enables support for the ARMv8 software model (Versatile Express). From 039599c92d3b2e73689e8b6e519d653fd4770abb Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 29 Apr 2020 15:58:12 -0500 Subject: [PATCH 03/16] amba: Retry adding deferred devices at late_initcall If amba bus devices defer when adding, the amba bus code simply retries adding the devices every 5 seconds. This doesn't work well as it completely unsynchronized with starting the init process which can happen in less than 5 secs. Add a retry during late_initcall. If the amba devices are added, then deferred probe takes over. If the dependencies have not probed at this point, then there's no improvement over previous behavior. To completely solve this, we'd need to retry after every successful probe as deferred probe does. The list_empty() check now happens outside the mutex, but the mutex wasn't necessary in the first place. This needed to use deferred probe instead of fragile initcall ordering on 32-bit VExpress systems where the apb_pclk has a number of probe dependencies (vexpress-sysregs, vexpress-config). Cc: John Stultz Cc: Saravana Kannan Cc: Nicolas Saenz Julienne Cc: Geert Uytterhoeven Cc: Russell King Tested-by: Sudeep Holla Reviewed-by: Sudeep Holla Reviewed-by: Linus Walleij Signed-off-by: Rob Herring --- drivers/amba/bus.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index fe1523664816..e797995fc65b 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -505,7 +505,7 @@ static DECLARE_DELAYED_WORK(deferred_retry_work, amba_deferred_retry_func); #define DEFERRED_DEVICE_TIMEOUT (msecs_to_jiffies(5 * 1000)) -static void amba_deferred_retry_func(struct work_struct *dummy) +static int amba_deferred_retry(void) { struct deferred_device *ddev, *tmp; @@ -521,11 +521,19 @@ static void amba_deferred_retry_func(struct work_struct *dummy) kfree(ddev); } + mutex_unlock(&deferred_devices_lock); + + return 0; +} +late_initcall(amba_deferred_retry); + +static void amba_deferred_retry_func(struct work_struct *dummy) +{ + amba_deferred_retry(); + if (!list_empty(&deferred_devices)) schedule_delayed_work(&deferred_retry_work, DEFERRED_DEVICE_TIMEOUT); - - mutex_unlock(&deferred_devices_lock); } /** From 81134fb541d46d0441ce7fce557eba6c418fcc36 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 29 Apr 2020 15:58:13 -0500 Subject: [PATCH 04/16] clk: versatile: Rework kconfig structure CONFIG_COMMON_CLK_VERSATILE doesn't really do anything other than hiding Arm Ltd reference platform clock drivers. It is both selected by the platforms that need it and has a 'depends on' for those platforms. Let's drop the selects and convert CONFIG_COMMON_CLK_VERSATILE into a menuconfig entry. With this make CONFIG_ICST visible. Move the 'select REGMAP_MMIO' to the drivers that require it (SP810 did not). This also has the side effect of enabling CONFIG_ICST for COMPILE_TEST as it was not visible before. Cc: Catalin Marinas Cc: Will Deacon Cc: Liviu Dudau Cc: Lorenzo Pieralisi Cc: Linus Walleij Reviewed-by: Sudeep Holla Reviewed-by: Stephen Boyd Signed-off-by: Rob Herring --- arch/arm/mach-integrator/Kconfig | 1 - arch/arm/mach-realview/Kconfig | 1 - arch/arm/mach-versatile/Kconfig | 1 - arch/arm/mach-vexpress/Kconfig | 1 - arch/arm64/Kconfig.platforms | 1 - drivers/clk/Makefile | 2 +- drivers/clk/versatile/Kconfig | 22 ++++++++++++---------- 7 files changed, 13 insertions(+), 16 deletions(-) diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index 982eabc36163..d59ba15a6b69 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -3,7 +3,6 @@ menuconfig ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6 select ARM_AMBA - select COMMON_CLK_VERSATILE select HAVE_TCM select ICST select MFD_SYSCON diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index 44ebbf9ec673..002404fafc14 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -6,7 +6,6 @@ menuconfig ARCH_REALVIEW select ARM_GIC select ARM_TIMER_SP804 select CLK_SP810 - select COMMON_CLK_VERSATILE select GPIO_PL061 if GPIOLIB select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig index f5c275434d6c..d88e7725bf99 100644 --- a/arch/arm/mach-versatile/Kconfig +++ b/arch/arm/mach-versatile/Kconfig @@ -6,7 +6,6 @@ config ARCH_VERSATILE select ARM_TIMER_SP804 select ARM_VIC select CLKSRC_VERSATILE - select COMMON_CLK_VERSATILE select CPU_ARM926T select ICST select MFD_SYSCON diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 18951cd20d9d..2d1fdec4c230 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -7,7 +7,6 @@ menuconfig ARCH_VEXPRESS select ARM_GIC select ARM_GLOBAL_TIMER select ARM_TIMER_SP804 - select COMMON_CLK_VERSATILE select GPIOLIB select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 5c38dc56b808..25cbb556d863 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -274,7 +274,6 @@ config ARCH_UNIPHIER config ARCH_VEXPRESS bool "ARMv8 software model (Versatile Express)" - select COMMON_CLK_VERSATILE select GPIOLIB select PM select PM_GENERIC_DOMAINS diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index f4169cc2fd31..fb30c16e1596 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -114,7 +114,7 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra/ obj-y += ti/ obj-$(CONFIG_CLK_UNIPHIER) += uniphier/ obj-$(CONFIG_ARCH_U8500) += ux500/ -obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/ +obj-y += versatile/ ifeq ($(CONFIG_COMMON_CLK), y) obj-$(CONFIG_X86) += x86/ endif diff --git a/drivers/clk/versatile/Kconfig b/drivers/clk/versatile/Kconfig index c2618f1477a2..df0d50bb846c 100644 --- a/drivers/clk/versatile/Kconfig +++ b/drivers/clk/versatile/Kconfig @@ -1,22 +1,22 @@ # SPDX-License-Identifier: GPL-2.0-only -config ICST - bool -config COMMON_CLK_VERSATILE - bool "Clock driver for ARM Reference designs" - depends on ARCH_INTEGRATOR || ARCH_REALVIEW || \ - ARCH_VERSATILE || ARCH_VEXPRESS || ARM64 || \ - COMPILE_TEST +menuconfig COMMON_CLK_VERSATILE + bool "Clock driver for ARM Reference designs" if COMPILE_TEST + default y if ARCH_INTEGRATOR || ARCH_REALVIEW || \ + ARCH_VERSATILE || ARCH_VEXPRESS + +if COMMON_CLK_VERSATILE + +config ICST + bool "Clock driver for ARM Reference designs ICST" select REGMAP_MMIO ---help--- Supports clocking on ARM Reference designs: - Integrator/AP and Integrator/CP - RealView PB1176, EB, PB11MP and PBX - - Versatile Express config CLK_SP810 bool "Clock driver for ARM SP810 System Controller" - depends on COMMON_CLK_VERSATILE default y if ARCH_VEXPRESS ---help--- Supports clock muxing (REFCLK/TIMCLK to TIMERCLKEN0-3) capabilities @@ -24,10 +24,12 @@ config CLK_SP810 config CLK_VEXPRESS_OSC bool "Clock driver for Versatile Express OSC clock generators" - depends on COMMON_CLK_VERSATILE depends on VEXPRESS_CONFIG + select REGMAP_MMIO default y if ARCH_VEXPRESS ---help--- Simple regmap-based driver driving clock generators on Versatile Express platforms hidden behind its configuration infrastructure, commonly known as OSCs. + +endif From 562bbb233513560e2a4b253382321b175420b024 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 29 Apr 2020 15:58:14 -0500 Subject: [PATCH 05/16] clk: versatile: Only enable SP810 on 32-bit by default While 64-bit Arm reference platforms have SP810 for clocks for SP804 timers, they are not needed since the arch timers are used instead. Cc: Catalin Marinas Cc: Will Deacon Cc: Lorenzo Pieralisi Cc: Linus Walleij Cc: linux-clk@vger.kernel.org Reviewed-by: Sudeep Holla Reviewed-by: Stephen Boyd Acked-by: Arnd Bergmann Acked-by: Liviu Dudau Signed-off-by: Rob Herring --- drivers/clk/versatile/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/versatile/Kconfig b/drivers/clk/versatile/Kconfig index df0d50bb846c..a47dd6c86d2e 100644 --- a/drivers/clk/versatile/Kconfig +++ b/drivers/clk/versatile/Kconfig @@ -17,7 +17,7 @@ config ICST config CLK_SP810 bool "Clock driver for ARM SP810 System Controller" - default y if ARCH_VEXPRESS + default y if (ARCH_VEXPRESS && ARM) ---help--- Supports clock muxing (REFCLK/TIMCLK to TIMERCLKEN0-3) capabilities of the ARM SP810 System Controller cell. From 03cc105f2edfe2b95ffce56422c38862a23dbbd1 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 29 Apr 2020 15:58:15 -0500 Subject: [PATCH 06/16] clk: vexpress-osc: Use the devres clock API variants In preparation to enable the vexpress-osc clock driver as a module, convert the driver to use the managed devres clock API variants. With this, a driver .remove() hook is not needed. Cc: Lorenzo Pieralisi Cc: Linus Walleij Cc: linux-clk@vger.kernel.org Reviewed-by: Stephen Boyd Reviewed-by: Sudeep Holla Acked-by: Arnd Bergmann Acked-by: Liviu Dudau Signed-off-by: Rob Herring --- drivers/clk/versatile/clk-vexpress-osc.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/clk/versatile/clk-vexpress-osc.c b/drivers/clk/versatile/clk-vexpress-osc.c index 7ade146a3ea9..5bb1d5a714d0 100644 --- a/drivers/clk/versatile/clk-vexpress-osc.c +++ b/drivers/clk/versatile/clk-vexpress-osc.c @@ -65,8 +65,8 @@ static int vexpress_osc_probe(struct platform_device *pdev) { struct clk_init_data init; struct vexpress_osc *osc; - struct clk *clk; u32 range[2]; + int ret; osc = devm_kzalloc(&pdev->dev, sizeof(*osc), GFP_KERNEL); if (!osc) @@ -92,11 +92,11 @@ static int vexpress_osc_probe(struct platform_device *pdev) osc->hw.init = &init; - clk = clk_register(NULL, &osc->hw); - if (IS_ERR(clk)) - return PTR_ERR(clk); + ret = devm_clk_hw_register(&pdev->dev, &osc->hw); + if (ret < 0) + return ret; - of_clk_add_provider(pdev->dev.of_node, of_clk_src_simple_get, clk); + devm_of_clk_add_hw_provider(&pdev->dev, of_clk_hw_simple_get, &osc->hw); clk_hw_set_rate_range(&osc->hw, osc->rate_min, osc->rate_max); dev_dbg(&pdev->dev, "Registered clock '%s'\n", init.name); From 75b272bd093bd0df5d3052b39a8f0dae45e86af5 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 29 Apr 2020 15:58:16 -0500 Subject: [PATCH 07/16] clk: vexpress-osc: Support building as a module Enable building the vexpress-osc clock driver as a module. Cc: Linus Walleij Cc: Liviu Dudau Cc: Lorenzo Pieralisi Cc: Michael Turquette Cc: linux-clk@vger.kernel.org Reviewed-by: Sudeep Holla Reviewed-by: Stephen Boyd Signed-off-by: Rob Herring --- drivers/clk/versatile/Kconfig | 2 +- drivers/clk/versatile/clk-vexpress-osc.c | 10 ++++------ 2 files changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/clk/versatile/Kconfig b/drivers/clk/versatile/Kconfig index a47dd6c86d2e..a0ed412e8396 100644 --- a/drivers/clk/versatile/Kconfig +++ b/drivers/clk/versatile/Kconfig @@ -23,7 +23,7 @@ config CLK_SP810 of the ARM SP810 System Controller cell. config CLK_VEXPRESS_OSC - bool "Clock driver for Versatile Express OSC clock generators" + tristate "Clock driver for Versatile Express OSC clock generators" depends on VEXPRESS_CONFIG select REGMAP_MMIO default y if ARCH_VEXPRESS diff --git a/drivers/clk/versatile/clk-vexpress-osc.c b/drivers/clk/versatile/clk-vexpress-osc.c index 5bb1d5a714d0..b2b32fa2d7c3 100644 --- a/drivers/clk/versatile/clk-vexpress-osc.c +++ b/drivers/clk/versatile/clk-vexpress-osc.c @@ -7,6 +7,7 @@ #include #include #include +#include #include #include #include @@ -108,6 +109,7 @@ static const struct of_device_id vexpress_osc_of_match[] = { { .compatible = "arm,vexpress-osc", }, {} }; +MODULE_DEVICE_TABLE(of, vexpress_osc_of_match); static struct platform_driver vexpress_osc_driver = { .driver = { @@ -116,9 +118,5 @@ static struct platform_driver vexpress_osc_driver = { }, .probe = vexpress_osc_probe, }; - -static int __init vexpress_osc_init(void) -{ - return platform_driver_register(&vexpress_osc_driver); -} -core_initcall(vexpress_osc_init); +module_platform_driver(vexpress_osc_driver); +MODULE_LICENSE("GPL v2"); From a229635f3bc981ea9e19810ae09b171952fa676b Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 29 Apr 2020 15:58:17 -0500 Subject: [PATCH 08/16] mfd: vexpress-sysreg: Drop selecting CONFIG_CLKSRC_MMIO Nothing in the VExpress sysregs nor the MFD child drivers use CONFIG_CLKSRC_MMIO. There's the 24MHz counter, but that's handled by drivers/clocksource/timer-versatile.c which doesn't use CONFIG_CLKSRC_MMIO either. So let's just drop CONFIG_CLKSRC_MMIO. As the !ARCH_USES_GETTIMEOFFSET dependency was added for CONFIG_CLKSRC_MMIO, that can be dropped, too. Cc: Lorenzo Pieralisi Cc: Linus Walleij Reviewed-by: Sudeep Holla Acked-by: Arnd Bergmann Acked-by: Liviu Dudau Acked-by: Lee Jones Signed-off-by: Rob Herring --- drivers/mfd/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 0a59249198d3..b1311dea2da1 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -2029,9 +2029,8 @@ endmenu config MFD_VEXPRESS_SYSREG bool "Versatile Express System Registers" - depends on VEXPRESS_CONFIG && GPIOLIB && !ARCH_USES_GETTIMEOFFSET + depends on VEXPRESS_CONFIG && GPIOLIB default y - select CLKSRC_MMIO select GPIO_GENERIC_PLATFORM select MFD_CORE select MFD_SYSCON From 13fc767335caf08eed4de5a07e509cfddf6d2cbd Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 29 Apr 2020 15:58:18 -0500 Subject: [PATCH 09/16] mfd: vexpress-sysreg: Drop unused syscon child devices The "sys_id", "sys_misc" and "sys_procid" devices don't have a user anywhere in the tree and do nothing more than create a syscon regmap for a single register or 2. That's an overkill for creating child devices. Let's just remove them. Cc: Liviu Dudau Cc: Lorenzo Pieralisi Cc: Linus Walleij Reviewed-by: Sudeep Holla Acked-by: Lee Jones Signed-off-by: Rob Herring --- drivers/mfd/vexpress-sysreg.c | 36 ----------------------------------- 1 file changed, 36 deletions(-) diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c index 0b9cc67706c7..90a4eda2ba2b 100644 --- a/drivers/mfd/vexpress-sysreg.c +++ b/drivers/mfd/vexpress-sysreg.c @@ -43,10 +43,6 @@ /* The sysreg block is just a random collection of various functions... */ -static struct syscon_platform_data vexpress_sysreg_sys_id_pdata = { - .label = "sys_id", -}; - static struct bgpio_pdata vexpress_sysreg_sys_led_pdata = { .label = "sys_led", .base = -1, @@ -65,24 +61,8 @@ static struct bgpio_pdata vexpress_sysreg_sys_flash_pdata = { .ngpio = 1, }; -static struct syscon_platform_data vexpress_sysreg_sys_misc_pdata = { - .label = "sys_misc", -}; - -static struct syscon_platform_data vexpress_sysreg_sys_procid_pdata = { - .label = "sys_procid", -}; - static struct mfd_cell vexpress_sysreg_cells[] = { { - .name = "syscon", - .num_resources = 1, - .resources = (struct resource []) { - DEFINE_RES_MEM(SYS_ID, 0x4), - }, - .platform_data = &vexpress_sysreg_sys_id_pdata, - .pdata_size = sizeof(vexpress_sysreg_sys_id_pdata), - }, { .name = "basic-mmio-gpio", .of_compatible = "arm,vexpress-sysreg,sys_led", .num_resources = 1, @@ -109,22 +89,6 @@ static struct mfd_cell vexpress_sysreg_cells[] = { }, .platform_data = &vexpress_sysreg_sys_flash_pdata, .pdata_size = sizeof(vexpress_sysreg_sys_flash_pdata), - }, { - .name = "syscon", - .num_resources = 1, - .resources = (struct resource []) { - DEFINE_RES_MEM(SYS_MISC, 0x4), - }, - .platform_data = &vexpress_sysreg_sys_misc_pdata, - .pdata_size = sizeof(vexpress_sysreg_sys_misc_pdata), - }, { - .name = "syscon", - .num_resources = 1, - .resources = (struct resource []) { - DEFINE_RES_MEM(SYS_PROCID0, 0x8), - }, - .platform_data = &vexpress_sysreg_sys_procid_pdata, - .pdata_size = sizeof(vexpress_sysreg_sys_procid_pdata), }, { .name = "vexpress-syscfg", .num_resources = 1, From 0ea355ef78434ae3e8faffe605c98b62e07d1273 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 29 Apr 2020 15:58:19 -0500 Subject: [PATCH 10/16] mfd: vexpress-sysreg: Use devres API variants Use the managed devm_gpiochip_add_data() and devm_mfd_add_devices() instead of their unmanaged counterparts. With this, no .remove() hook is needed for driver unbind. Cc: Lorenzo Pieralisi Cc: Linus Walleij Reviewed-by: Sudeep Holla Acked-by: Arnd Bergmann Acked-by: Liviu Dudau Acked-by: Lee Jones Signed-off-by: Rob Herring --- drivers/mfd/vexpress-sysreg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c index 90a4eda2ba2b..9fb37fa689e0 100644 --- a/drivers/mfd/vexpress-sysreg.c +++ b/drivers/mfd/vexpress-sysreg.c @@ -140,9 +140,9 @@ static int vexpress_sysreg_probe(struct platform_device *pdev) bgpio_init(mmc_gpio_chip, &pdev->dev, 0x4, base + SYS_MCI, NULL, NULL, NULL, NULL, 0); mmc_gpio_chip->ngpio = 2; - gpiochip_add_data(mmc_gpio_chip, NULL); + devm_gpiochip_add_data(&pdev->dev, mmc_gpio_chip, NULL); - return mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO, + return devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO, vexpress_sysreg_cells, ARRAY_SIZE(vexpress_sysreg_cells), mem, 0, NULL); } From 7b9d428e05197b589d5b770a791231cf972bd2ed Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 29 Apr 2020 15:58:20 -0500 Subject: [PATCH 11/16] mfd: vexpress-sysreg: Support building as a module Enable building the vexpress-sysreg driver as a module. As deferred probe between the vexpress components works now, we don't need to create struct devices early with of_platform_device_create(). Cc: Liviu Dudau Cc: Lorenzo Pieralisi Cc: Linus Walleij Reviewed-by: Sudeep Holla Acked-by: Lee Jones Signed-off-by: Rob Herring --- drivers/mfd/Kconfig | 2 +- drivers/mfd/vexpress-sysreg.c | 15 ++++----------- 2 files changed, 5 insertions(+), 12 deletions(-) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index b1311dea2da1..792766558328 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -2028,7 +2028,7 @@ config MCP_UCB1200_TS endmenu config MFD_VEXPRESS_SYSREG - bool "Versatile Express System Registers" + tristate "Versatile Express System Registers" depends on VEXPRESS_CONFIG && GPIOLIB default y select GPIO_GENERIC_PLATFORM diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c index 9fb37fa689e0..eeeeb1d26d5d 100644 --- a/drivers/mfd/vexpress-sysreg.c +++ b/drivers/mfd/vexpress-sysreg.c @@ -8,6 +8,7 @@ #include #include #include +#include #include #include #include @@ -151,6 +152,7 @@ static const struct of_device_id vexpress_sysreg_match[] = { { .compatible = "arm,vexpress-sysreg", }, {}, }; +MODULE_DEVICE_TABLE(of, vexpress_sysreg_match); static struct platform_driver vexpress_sysreg_driver = { .driver = { @@ -160,14 +162,5 @@ static struct platform_driver vexpress_sysreg_driver = { .probe = vexpress_sysreg_probe, }; -static int __init vexpress_sysreg_init(void) -{ - struct device_node *node; - - /* Need the sysreg early, before any other device... */ - for_each_matching_node(node, vexpress_sysreg_match) - of_platform_device_create(node, NULL, NULL); - - return platform_driver_register(&vexpress_sysreg_driver); -} -core_initcall(vexpress_sysreg_init); +module_platform_driver(vexpress_sysreg_driver); +MODULE_LICENSE("GPL v2"); From d06cfe3f123c50449a0c3ece21bc16668289c50f Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 29 Apr 2020 15:58:21 -0500 Subject: [PATCH 12/16] bus: vexpress-config: Merge vexpress-syscfg into vexpress-config The only thing that vexpress-syscfg does is provide a regmap to vexpress-config bus child devices. There's little reason to have 2 components for this. The current structure with initcall ordering requirements makes turning these components into modules more difficult. So let's start to simplify things and merge vexpress-syscfg into vexpress-config. There's no functional change in this commit and it's still separate components until subsequent commits. Cc: Lorenzo Pieralisi Cc: Linus Walleij Cc: Arnd Bergmann Reviewed-by: Sudeep Holla Acked-by: Greg Kroah-Hartman Acked-by: Liviu Dudau Signed-off-by: Rob Herring --- arch/arm/mach-vexpress/Kconfig | 1 - drivers/bus/vexpress-config.c | 283 +++++++++++++++++++++++++++++++-- drivers/misc/Kconfig | 9 -- drivers/misc/Makefile | 1 - drivers/misc/vexpress-syscfg.c | 280 -------------------------------- include/linux/vexpress.h | 17 -- 6 files changed, 274 insertions(+), 317 deletions(-) delete mode 100644 drivers/misc/vexpress-syscfg.c diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 2d1fdec4c230..065e12991663 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -20,7 +20,6 @@ menuconfig ARCH_VEXPRESS select REGULATOR if MMC_ARMMMCI select REGULATOR_FIXED_VOLTAGE if REGULATOR select VEXPRESS_CONFIG - select VEXPRESS_SYSCFG help This option enables support for systems using Cortex processor based ARM core and logic (FPGA) tiles on the Versatile Express motherboard, diff --git a/drivers/bus/vexpress-config.c b/drivers/bus/vexpress-config.c index ff70575b2db6..43f5beac9811 100644 --- a/drivers/bus/vexpress-config.c +++ b/drivers/bus/vexpress-config.c @@ -6,10 +6,48 @@ #include #include +#include #include +#include #include +#include +#include #include +#define SYS_CFGDATA 0x0 + +#define SYS_CFGCTRL 0x4 +#define SYS_CFGCTRL_START (1 << 31) +#define SYS_CFGCTRL_WRITE (1 << 30) +#define SYS_CFGCTRL_DCC(n) (((n) & 0xf) << 26) +#define SYS_CFGCTRL_FUNC(n) (((n) & 0x3f) << 20) +#define SYS_CFGCTRL_SITE(n) (((n) & 0x3) << 16) +#define SYS_CFGCTRL_POSITION(n) (((n) & 0xf) << 12) +#define SYS_CFGCTRL_DEVICE(n) (((n) & 0xfff) << 0) + +#define SYS_CFGSTAT 0x8 +#define SYS_CFGSTAT_ERR (1 << 1) +#define SYS_CFGSTAT_COMPLETE (1 << 0) + + +struct vexpress_syscfg { + struct device *dev; + void __iomem *base; + struct list_head funcs; +}; + +struct vexpress_syscfg_func { + struct list_head list; + struct vexpress_syscfg *syscfg; + struct regmap *regmap; + int num_templates; + u32 template[]; /* Keep it last! */ +}; + +struct vexpress_config_bridge_ops { + struct regmap * (*regmap_init)(struct device *dev, void *context); + void (*regmap_exit)(struct regmap *regmap, void *context); +}; struct vexpress_config_bridge { struct vexpress_config_bridge_ops *ops; @@ -27,17 +65,12 @@ void vexpress_config_set_master(u32 site) vexpress_config_site_master = site; } -u32 vexpress_config_get_master(void) -{ - return vexpress_config_site_master; -} - -void vexpress_config_lock(void *arg) +static void vexpress_config_lock(void *arg) { mutex_lock(&vexpress_config_mutex); } -void vexpress_config_unlock(void *arg) +static void vexpress_config_unlock(void *arg) { mutex_unlock(&vexpress_config_mutex); } @@ -59,7 +92,7 @@ static void vexpress_config_find_prop(struct device_node *node, } } -int vexpress_config_get_topo(struct device_node *node, u32 *site, +static int vexpress_config_get_topo(struct device_node *node, u32 *site, u32 *position, u32 *dcc) { vexpress_config_find_prop(node, "arm,vexpress,site", site); @@ -113,7 +146,7 @@ struct regmap *devm_regmap_init_vexpress_config(struct device *dev) } EXPORT_SYMBOL_GPL(devm_regmap_init_vexpress_config); -struct device *vexpress_config_bridge_register(struct device *parent, +static struct device *vexpress_config_bridge_register(struct device *parent, struct vexpress_config_bridge_ops *ops, void *context) { struct device *dev; @@ -201,3 +234,235 @@ static int __init vexpress_config_init(void) } postcore_initcall(vexpress_config_init); +static int vexpress_syscfg_exec(struct vexpress_syscfg_func *func, + int index, bool write, u32 *data) +{ + struct vexpress_syscfg *syscfg = func->syscfg; + u32 command, status; + int tries; + long timeout; + + if (WARN_ON(index >= func->num_templates)) + return -EINVAL; + + command = readl(syscfg->base + SYS_CFGCTRL); + if (WARN_ON(command & SYS_CFGCTRL_START)) + return -EBUSY; + + command = func->template[index]; + command |= SYS_CFGCTRL_START; + command |= write ? SYS_CFGCTRL_WRITE : 0; + + /* Use a canary for reads */ + if (!write) + *data = 0xdeadbeef; + + dev_dbg(syscfg->dev, "func %p, command %x, data %x\n", + func, command, *data); + writel(*data, syscfg->base + SYS_CFGDATA); + writel(0, syscfg->base + SYS_CFGSTAT); + writel(command, syscfg->base + SYS_CFGCTRL); + mb(); + + /* The operation can take ages... Go to sleep, 100us initially */ + tries = 100; + timeout = 100; + do { + if (!irqs_disabled()) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(usecs_to_jiffies(timeout)); + if (signal_pending(current)) + return -EINTR; + } else { + udelay(timeout); + } + + status = readl(syscfg->base + SYS_CFGSTAT); + if (status & SYS_CFGSTAT_ERR) + return -EFAULT; + + if (timeout > 20) + timeout -= 20; + } while (--tries && !(status & SYS_CFGSTAT_COMPLETE)); + if (WARN_ON_ONCE(!tries)) + return -ETIMEDOUT; + + if (!write) { + *data = readl(syscfg->base + SYS_CFGDATA); + dev_dbg(syscfg->dev, "func %p, read data %x\n", func, *data); + } + + return 0; +} + +static int vexpress_syscfg_read(void *context, unsigned int index, + unsigned int *val) +{ + struct vexpress_syscfg_func *func = context; + + return vexpress_syscfg_exec(func, index, false, val); +} + +static int vexpress_syscfg_write(void *context, unsigned int index, + unsigned int val) +{ + struct vexpress_syscfg_func *func = context; + + return vexpress_syscfg_exec(func, index, true, &val); +} + +static struct regmap_config vexpress_syscfg_regmap_config = { + .lock = vexpress_config_lock, + .unlock = vexpress_config_unlock, + .reg_bits = 32, + .val_bits = 32, + .reg_read = vexpress_syscfg_read, + .reg_write = vexpress_syscfg_write, + .reg_format_endian = REGMAP_ENDIAN_LITTLE, + .val_format_endian = REGMAP_ENDIAN_LITTLE, +}; + + +static struct regmap *vexpress_syscfg_regmap_init(struct device *dev, + void *context) +{ + int err; + struct vexpress_syscfg *syscfg = context; + struct vexpress_syscfg_func *func; + struct property *prop; + const __be32 *val = NULL; + __be32 energy_quirk[4]; + int num; + u32 site, position, dcc; + int i; + + err = vexpress_config_get_topo(dev->of_node, &site, + &position, &dcc); + if (err) + return ERR_PTR(err); + + prop = of_find_property(dev->of_node, + "arm,vexpress-sysreg,func", NULL); + if (!prop) + return ERR_PTR(-EINVAL); + + num = prop->length / sizeof(u32) / 2; + val = prop->value; + + /* + * "arm,vexpress-energy" function used to be described + * by its first device only, now it requires both + */ + if (num == 1 && of_device_is_compatible(dev->of_node, + "arm,vexpress-energy")) { + num = 2; + energy_quirk[0] = *val; + energy_quirk[2] = *val++; + energy_quirk[1] = *val; + energy_quirk[3] = cpu_to_be32(be32_to_cpup(val) + 1); + val = energy_quirk; + } + + func = kzalloc(struct_size(func, template, num), GFP_KERNEL); + if (!func) + return ERR_PTR(-ENOMEM); + + func->syscfg = syscfg; + func->num_templates = num; + + for (i = 0; i < num; i++) { + u32 function, device; + + function = be32_to_cpup(val++); + device = be32_to_cpup(val++); + + dev_dbg(dev, "func %p: %u/%u/%u/%u/%u\n", + func, site, position, dcc, + function, device); + + func->template[i] = SYS_CFGCTRL_DCC(dcc); + func->template[i] |= SYS_CFGCTRL_SITE(site); + func->template[i] |= SYS_CFGCTRL_POSITION(position); + func->template[i] |= SYS_CFGCTRL_FUNC(function); + func->template[i] |= SYS_CFGCTRL_DEVICE(device); + } + + vexpress_syscfg_regmap_config.max_register = num - 1; + + func->regmap = regmap_init(dev, NULL, func, + &vexpress_syscfg_regmap_config); + + if (IS_ERR(func->regmap)) { + void *err = func->regmap; + + kfree(func); + return err; + } + + list_add(&func->list, &syscfg->funcs); + + return func->regmap; +} + +static void vexpress_syscfg_regmap_exit(struct regmap *regmap, void *context) +{ + struct vexpress_syscfg *syscfg = context; + struct vexpress_syscfg_func *func, *tmp; + + regmap_exit(regmap); + + list_for_each_entry_safe(func, tmp, &syscfg->funcs, list) { + if (func->regmap == regmap) { + list_del(&syscfg->funcs); + kfree(func); + break; + } + } +} + +static struct vexpress_config_bridge_ops vexpress_syscfg_bridge_ops = { + .regmap_init = vexpress_syscfg_regmap_init, + .regmap_exit = vexpress_syscfg_regmap_exit, +}; + + +static int vexpress_syscfg_probe(struct platform_device *pdev) +{ + struct vexpress_syscfg *syscfg; + struct resource *res; + struct device *bridge; + + syscfg = devm_kzalloc(&pdev->dev, sizeof(*syscfg), GFP_KERNEL); + if (!syscfg) + return -ENOMEM; + syscfg->dev = &pdev->dev; + INIT_LIST_HEAD(&syscfg->funcs); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + syscfg->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(syscfg->base)) + return PTR_ERR(syscfg->base); + + /* Must use dev.parent (MFD), as that's where DT phandle points at... */ + bridge = vexpress_config_bridge_register(pdev->dev.parent, + &vexpress_syscfg_bridge_ops, syscfg); + + return PTR_ERR_OR_ZERO(bridge); +} + +static const struct platform_device_id vexpress_syscfg_id_table[] = { + { "vexpress-syscfg", }, + {}, +}; + +static struct platform_driver vexpress_syscfg_driver = { + .driver.name = "vexpress-syscfg", + .id_table = vexpress_syscfg_id_table, + .probe = vexpress_syscfg_probe, +}; + +static int __init vexpress_syscfg_init(void) +{ + return platform_driver_register(&vexpress_syscfg_driver); +} +core_initcall(vexpress_syscfg_init); diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 99e151475d8f..edd5dd5ebfdc 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -423,15 +423,6 @@ config SRAM config SRAM_EXEC bool -config VEXPRESS_SYSCFG - bool "Versatile Express System Configuration driver" - depends on VEXPRESS_CONFIG - default y - help - ARM Ltd. Versatile Express uses specialised platform configuration - bus. System Configuration interface is one of the possible means - of generating transactions on this bus. - config PCI_ENDPOINT_TEST depends on PCI select CRC32 diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 9abf2923d831..c7bd01ac6291 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -49,7 +49,6 @@ obj-$(CONFIG_SRAM_EXEC) += sram-exec.o obj-y += mic/ obj-$(CONFIG_GENWQE) += genwqe/ obj-$(CONFIG_ECHO) += echo/ -obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o obj-$(CONFIG_CXL_BASE) += cxl/ obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o obj-$(CONFIG_OCXL) += ocxl/ diff --git a/drivers/misc/vexpress-syscfg.c b/drivers/misc/vexpress-syscfg.c deleted file mode 100644 index a431787c0898..000000000000 --- a/drivers/misc/vexpress-syscfg.c +++ /dev/null @@ -1,280 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * - * Copyright (C) 2014 ARM Limited - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - - -#define SYS_CFGDATA 0x0 - -#define SYS_CFGCTRL 0x4 -#define SYS_CFGCTRL_START (1 << 31) -#define SYS_CFGCTRL_WRITE (1 << 30) -#define SYS_CFGCTRL_DCC(n) (((n) & 0xf) << 26) -#define SYS_CFGCTRL_FUNC(n) (((n) & 0x3f) << 20) -#define SYS_CFGCTRL_SITE(n) (((n) & 0x3) << 16) -#define SYS_CFGCTRL_POSITION(n) (((n) & 0xf) << 12) -#define SYS_CFGCTRL_DEVICE(n) (((n) & 0xfff) << 0) - -#define SYS_CFGSTAT 0x8 -#define SYS_CFGSTAT_ERR (1 << 1) -#define SYS_CFGSTAT_COMPLETE (1 << 0) - - -struct vexpress_syscfg { - struct device *dev; - void __iomem *base; - struct list_head funcs; -}; - -struct vexpress_syscfg_func { - struct list_head list; - struct vexpress_syscfg *syscfg; - struct regmap *regmap; - int num_templates; - u32 template[]; /* Keep it last! */ -}; - - -static int vexpress_syscfg_exec(struct vexpress_syscfg_func *func, - int index, bool write, u32 *data) -{ - struct vexpress_syscfg *syscfg = func->syscfg; - u32 command, status; - int tries; - long timeout; - - if (WARN_ON(index >= func->num_templates)) - return -EINVAL; - - command = readl(syscfg->base + SYS_CFGCTRL); - if (WARN_ON(command & SYS_CFGCTRL_START)) - return -EBUSY; - - command = func->template[index]; - command |= SYS_CFGCTRL_START; - command |= write ? SYS_CFGCTRL_WRITE : 0; - - /* Use a canary for reads */ - if (!write) - *data = 0xdeadbeef; - - dev_dbg(syscfg->dev, "func %p, command %x, data %x\n", - func, command, *data); - writel(*data, syscfg->base + SYS_CFGDATA); - writel(0, syscfg->base + SYS_CFGSTAT); - writel(command, syscfg->base + SYS_CFGCTRL); - mb(); - - /* The operation can take ages... Go to sleep, 100us initially */ - tries = 100; - timeout = 100; - do { - if (!irqs_disabled()) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(usecs_to_jiffies(timeout)); - if (signal_pending(current)) - return -EINTR; - } else { - udelay(timeout); - } - - status = readl(syscfg->base + SYS_CFGSTAT); - if (status & SYS_CFGSTAT_ERR) - return -EFAULT; - - if (timeout > 20) - timeout -= 20; - } while (--tries && !(status & SYS_CFGSTAT_COMPLETE)); - if (WARN_ON_ONCE(!tries)) - return -ETIMEDOUT; - - if (!write) { - *data = readl(syscfg->base + SYS_CFGDATA); - dev_dbg(syscfg->dev, "func %p, read data %x\n", func, *data); - } - - return 0; -} - -static int vexpress_syscfg_read(void *context, unsigned int index, - unsigned int *val) -{ - struct vexpress_syscfg_func *func = context; - - return vexpress_syscfg_exec(func, index, false, val); -} - -static int vexpress_syscfg_write(void *context, unsigned int index, - unsigned int val) -{ - struct vexpress_syscfg_func *func = context; - - return vexpress_syscfg_exec(func, index, true, &val); -} - -static struct regmap_config vexpress_syscfg_regmap_config = { - .lock = vexpress_config_lock, - .unlock = vexpress_config_unlock, - .reg_bits = 32, - .val_bits = 32, - .reg_read = vexpress_syscfg_read, - .reg_write = vexpress_syscfg_write, - .reg_format_endian = REGMAP_ENDIAN_LITTLE, - .val_format_endian = REGMAP_ENDIAN_LITTLE, -}; - - -static struct regmap *vexpress_syscfg_regmap_init(struct device *dev, - void *context) -{ - int err; - struct vexpress_syscfg *syscfg = context; - struct vexpress_syscfg_func *func; - struct property *prop; - const __be32 *val = NULL; - __be32 energy_quirk[4]; - int num; - u32 site, position, dcc; - int i; - - err = vexpress_config_get_topo(dev->of_node, &site, - &position, &dcc); - if (err) - return ERR_PTR(err); - - prop = of_find_property(dev->of_node, - "arm,vexpress-sysreg,func", NULL); - if (!prop) - return ERR_PTR(-EINVAL); - - num = prop->length / sizeof(u32) / 2; - val = prop->value; - - /* - * "arm,vexpress-energy" function used to be described - * by its first device only, now it requires both - */ - if (num == 1 && of_device_is_compatible(dev->of_node, - "arm,vexpress-energy")) { - num = 2; - energy_quirk[0] = *val; - energy_quirk[2] = *val++; - energy_quirk[1] = *val; - energy_quirk[3] = cpu_to_be32(be32_to_cpup(val) + 1); - val = energy_quirk; - } - - func = kzalloc(struct_size(func, template, num), GFP_KERNEL); - if (!func) - return ERR_PTR(-ENOMEM); - - func->syscfg = syscfg; - func->num_templates = num; - - for (i = 0; i < num; i++) { - u32 function, device; - - function = be32_to_cpup(val++); - device = be32_to_cpup(val++); - - dev_dbg(dev, "func %p: %u/%u/%u/%u/%u\n", - func, site, position, dcc, - function, device); - - func->template[i] = SYS_CFGCTRL_DCC(dcc); - func->template[i] |= SYS_CFGCTRL_SITE(site); - func->template[i] |= SYS_CFGCTRL_POSITION(position); - func->template[i] |= SYS_CFGCTRL_FUNC(function); - func->template[i] |= SYS_CFGCTRL_DEVICE(device); - } - - vexpress_syscfg_regmap_config.max_register = num - 1; - - func->regmap = regmap_init(dev, NULL, func, - &vexpress_syscfg_regmap_config); - - if (IS_ERR(func->regmap)) { - void *err = func->regmap; - - kfree(func); - return err; - } - - list_add(&func->list, &syscfg->funcs); - - return func->regmap; -} - -static void vexpress_syscfg_regmap_exit(struct regmap *regmap, void *context) -{ - struct vexpress_syscfg *syscfg = context; - struct vexpress_syscfg_func *func, *tmp; - - regmap_exit(regmap); - - list_for_each_entry_safe(func, tmp, &syscfg->funcs, list) { - if (func->regmap == regmap) { - list_del(&syscfg->funcs); - kfree(func); - break; - } - } -} - -static struct vexpress_config_bridge_ops vexpress_syscfg_bridge_ops = { - .regmap_init = vexpress_syscfg_regmap_init, - .regmap_exit = vexpress_syscfg_regmap_exit, -}; - - -static int vexpress_syscfg_probe(struct platform_device *pdev) -{ - struct vexpress_syscfg *syscfg; - struct resource *res; - struct device *bridge; - - syscfg = devm_kzalloc(&pdev->dev, sizeof(*syscfg), GFP_KERNEL); - if (!syscfg) - return -ENOMEM; - syscfg->dev = &pdev->dev; - INIT_LIST_HEAD(&syscfg->funcs); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - syscfg->base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(syscfg->base)) - return PTR_ERR(syscfg->base); - - /* Must use dev.parent (MFD), as that's where DT phandle points at... */ - bridge = vexpress_config_bridge_register(pdev->dev.parent, - &vexpress_syscfg_bridge_ops, syscfg); - - return PTR_ERR_OR_ZERO(bridge); -} - -static const struct platform_device_id vexpress_syscfg_id_table[] = { - { "vexpress-syscfg", }, - {}, -}; - -static struct platform_driver vexpress_syscfg_driver = { - .driver.name = "vexpress-syscfg", - .id_table = vexpress_syscfg_id_table, - .probe = vexpress_syscfg_probe, -}; - -static int __init vexpress_syscfg_init(void) -{ - return platform_driver_register(&vexpress_syscfg_driver); -} -core_initcall(vexpress_syscfg_init); diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h index 2ec7992b054c..65096c792d57 100644 --- a/include/linux/vexpress.h +++ b/include/linux/vexpress.h @@ -18,23 +18,6 @@ /* Config infrastructure */ void vexpress_config_set_master(u32 site); -u32 vexpress_config_get_master(void); - -void vexpress_config_lock(void *arg); -void vexpress_config_unlock(void *arg); - -int vexpress_config_get_topo(struct device_node *node, u32 *site, - u32 *position, u32 *dcc); - -/* Config bridge API */ - -struct vexpress_config_bridge_ops { - struct regmap * (*regmap_init)(struct device *dev, void *context); - void (*regmap_exit)(struct regmap *regmap, void *context); -}; - -struct device *vexpress_config_bridge_register(struct device *parent, - struct vexpress_config_bridge_ops *ops, void *context); /* Config regmap API */ From a5a38765ac79b27d53e45a283418e75c0b57c1bb Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 29 Apr 2020 15:58:22 -0500 Subject: [PATCH 13/16] bus: vexpress-config: simplify config bus probing The vexpress-config initialization is dependent on the vexpress-syscfg driver probing. As vexpress-config was not a driver, deferred probe could not be used and instead initcall ordering was relied upon. This is fragile and doesn't work for modules. Let's move the config bus init into the vexpress-syscfg probe. This eliminates the initcall ordering requirement and the need to create a struct device and the "vexpress-config" class. Cc: Lorenzo Pieralisi Cc: Linus Walleij Cc: Arnd Bergmann Cc: Greg Kroah-Hartman Reviewed-by: Sudeep Holla Acked-by: Liviu Dudau Signed-off-by: Rob Herring --- drivers/bus/vexpress-config.c | 118 ++++++---------------------------- 1 file changed, 21 insertions(+), 97 deletions(-) diff --git a/drivers/bus/vexpress-config.c b/drivers/bus/vexpress-config.c index 43f5beac9811..43deb4df140b 100644 --- a/drivers/bus/vexpress-config.c +++ b/drivers/bus/vexpress-config.c @@ -56,7 +56,6 @@ struct vexpress_config_bridge { static DEFINE_MUTEX(vexpress_config_mutex); -static struct class *vexpress_config_class; static u32 vexpress_config_site_master = VEXPRESS_SITE_MASTER; @@ -121,9 +120,6 @@ struct regmap *devm_regmap_init_vexpress_config(struct device *dev) struct regmap *regmap; struct regmap **res; - if (WARN_ON(dev->parent->class != vexpress_config_class)) - return ERR_PTR(-ENODEV); - bridge = dev_get_drvdata(dev->parent); if (WARN_ON(!bridge)) return ERR_PTR(-EINVAL); @@ -146,94 +142,6 @@ struct regmap *devm_regmap_init_vexpress_config(struct device *dev) } EXPORT_SYMBOL_GPL(devm_regmap_init_vexpress_config); -static struct device *vexpress_config_bridge_register(struct device *parent, - struct vexpress_config_bridge_ops *ops, void *context) -{ - struct device *dev; - struct vexpress_config_bridge *bridge; - - if (!vexpress_config_class) { - vexpress_config_class = class_create(THIS_MODULE, - "vexpress-config"); - if (IS_ERR(vexpress_config_class)) - return (void *)vexpress_config_class; - } - - dev = device_create(vexpress_config_class, parent, 0, - NULL, "%s.bridge", dev_name(parent)); - - if (IS_ERR(dev)) - return dev; - - bridge = devm_kmalloc(dev, sizeof(*bridge), GFP_KERNEL); - if (!bridge) { - put_device(dev); - device_unregister(dev); - return ERR_PTR(-ENOMEM); - } - bridge->ops = ops; - bridge->context = context; - - dev_set_drvdata(dev, bridge); - - dev_dbg(parent, "Registered bridge '%s', parent node %p\n", - dev_name(dev), parent->of_node); - - return dev; -} - - -static int vexpress_config_node_match(struct device *dev, const void *data) -{ - const struct device_node *node = data; - - dev_dbg(dev, "Parent node %p, looking for %p\n", - dev->parent->of_node, node); - - return dev->parent->of_node == node; -} - -static int vexpress_config_populate(struct device_node *node) -{ - struct device_node *bridge; - struct device *parent; - int ret; - - bridge = of_parse_phandle(node, "arm,vexpress,config-bridge", 0); - if (!bridge) - return -EINVAL; - - parent = class_find_device(vexpress_config_class, NULL, bridge, - vexpress_config_node_match); - of_node_put(bridge); - if (WARN_ON(!parent)) - return -ENODEV; - - ret = of_platform_populate(node, NULL, NULL, parent); - - put_device(parent); - - return ret; -} - -static int __init vexpress_config_init(void) -{ - int err = 0; - struct device_node *node; - - /* Need the config devices early, before the "normal" devices... */ - for_each_compatible_node(node, NULL, "arm,vexpress,config-bus") { - err = vexpress_config_populate(node); - if (err) { - of_node_put(node); - break; - } - } - - return err; -} -postcore_initcall(vexpress_config_init); - static int vexpress_syscfg_exec(struct vexpress_syscfg_func *func, int index, bool write, u32 *data) { @@ -430,7 +338,8 @@ static int vexpress_syscfg_probe(struct platform_device *pdev) { struct vexpress_syscfg *syscfg; struct resource *res; - struct device *bridge; + struct vexpress_config_bridge *bridge; + struct device_node *node; syscfg = devm_kzalloc(&pdev->dev, sizeof(*syscfg), GFP_KERNEL); if (!syscfg) @@ -443,11 +352,26 @@ static int vexpress_syscfg_probe(struct platform_device *pdev) if (IS_ERR(syscfg->base)) return PTR_ERR(syscfg->base); - /* Must use dev.parent (MFD), as that's where DT phandle points at... */ - bridge = vexpress_config_bridge_register(pdev->dev.parent, - &vexpress_syscfg_bridge_ops, syscfg); + bridge = devm_kmalloc(&pdev->dev, sizeof(*bridge), GFP_KERNEL); + if (!bridge) + return -ENOMEM; - return PTR_ERR_OR_ZERO(bridge); + bridge->ops = &vexpress_syscfg_bridge_ops; + bridge->context = syscfg; + + dev_set_drvdata(&pdev->dev, bridge); + + for_each_compatible_node(node, NULL, "arm,vexpress,config-bus") { + struct device_node *bridge_np; + + bridge_np = of_parse_phandle(node, "arm,vexpress,config-bridge", 0); + if (bridge_np != pdev->dev.parent->of_node) + continue; + + of_platform_populate(node, NULL, NULL, &pdev->dev); + } + + return 0; } static const struct platform_device_id vexpress_syscfg_id_table[] = { From 310f80d61717425fbf799ef0ff0926e64cd57d9c Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 29 Apr 2020 15:58:23 -0500 Subject: [PATCH 14/16] vexpress: Move setting master site to vexpress-config bus There's only a single caller of vexpress_config_set_master() from vexpress-sysreg.c. Let's just make the registers needed available to vexpress-config and move all the code there. The registers needed aren't used anywhere else either. With this, we can get rid of the private API between these 2 drivers. Cc: Lorenzo Pieralisi Cc: Linus Walleij Cc: Greg Kroah-Hartman Acked-by: Liviu Dudau Acked-by: Sudeep Holla Acked-by: Lee Jones Signed-off-by: Rob Herring --- drivers/bus/vexpress-config.c | 37 +++++++++++++++++++++++++++++++---- drivers/mfd/vexpress-sysreg.c | 25 +---------------------- include/linux/vexpress.h | 9 --------- 3 files changed, 34 insertions(+), 37 deletions(-) diff --git a/drivers/bus/vexpress-config.c b/drivers/bus/vexpress-config.c index 43deb4df140b..caa35a4cb34d 100644 --- a/drivers/bus/vexpress-config.c +++ b/drivers/bus/vexpress-config.c @@ -14,9 +14,17 @@ #include #include -#define SYS_CFGDATA 0x0 +#define SYS_MISC 0x0 +#define SYS_MISC_MASTERSITE (1 << 14) -#define SYS_CFGCTRL 0x4 +#define SYS_PROCID0 0x24 +#define SYS_PROCID1 0x28 +#define SYS_HBI_MASK 0xfff +#define SYS_PROCIDx_HBI_SHIFT 0 + +#define SYS_CFGDATA 0x40 + +#define SYS_CFGCTRL 0x44 #define SYS_CFGCTRL_START (1 << 31) #define SYS_CFGCTRL_WRITE (1 << 30) #define SYS_CFGCTRL_DCC(n) (((n) & 0xf) << 26) @@ -25,10 +33,14 @@ #define SYS_CFGCTRL_POSITION(n) (((n) & 0xf) << 12) #define SYS_CFGCTRL_DEVICE(n) (((n) & 0xfff) << 0) -#define SYS_CFGSTAT 0x8 +#define SYS_CFGSTAT 0x48 #define SYS_CFGSTAT_ERR (1 << 1) #define SYS_CFGSTAT_COMPLETE (1 << 0) +#define VEXPRESS_SITE_MB 0 +#define VEXPRESS_SITE_DB1 1 +#define VEXPRESS_SITE_DB2 2 +#define VEXPRESS_SITE_MASTER 0xf struct vexpress_syscfg { struct device *dev; @@ -59,7 +71,7 @@ static DEFINE_MUTEX(vexpress_config_mutex); static u32 vexpress_config_site_master = VEXPRESS_SITE_MASTER; -void vexpress_config_set_master(u32 site) +static void vexpress_config_set_master(u32 site) { vexpress_config_site_master = site; } @@ -340,6 +352,8 @@ static int vexpress_syscfg_probe(struct platform_device *pdev) struct resource *res; struct vexpress_config_bridge *bridge; struct device_node *node; + int master; + u32 dt_hbi; syscfg = devm_kzalloc(&pdev->dev, sizeof(*syscfg), GFP_KERNEL); if (!syscfg) @@ -361,6 +375,21 @@ static int vexpress_syscfg_probe(struct platform_device *pdev) dev_set_drvdata(&pdev->dev, bridge); + master = readl(syscfg->base + SYS_MISC) & SYS_MISC_MASTERSITE ? + VEXPRESS_SITE_DB2 : VEXPRESS_SITE_DB1; + vexpress_config_set_master(master); + + /* Confirm board type against DT property, if available */ + if (of_property_read_u32(of_root, "arm,hbi", &dt_hbi) == 0) { + u32 id = readl(syscfg->base + (master == VEXPRESS_SITE_DB1 ? + SYS_PROCID0 : SYS_PROCID1)); + u32 hbi = (id >> SYS_PROCIDx_HBI_SHIFT) & SYS_HBI_MASK; + + if (WARN_ON(dt_hbi != hbi)) + dev_warn(&pdev->dev, "DT HBI (%x) is not matching hardware (%x)!\n", + dt_hbi, hbi); + } + for_each_compatible_node(node, NULL, "arm,vexpress,config-bus") { struct device_node *bridge_np; diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c index eeeeb1d26d5d..aaf24af287dd 100644 --- a/drivers/mfd/vexpress-sysreg.c +++ b/drivers/mfd/vexpress-sysreg.c @@ -14,7 +14,6 @@ #include #include #include -#include #define SYS_ID 0x000 #define SYS_SW 0x004 @@ -37,11 +36,6 @@ #define SYS_CFGCTRL 0x0a4 #define SYS_CFGSTAT 0x0a8 -#define SYS_HBI_MASK 0xfff -#define SYS_PROCIDx_HBI_SHIFT 0 - -#define SYS_MISC_MASTERSITE (1 << 14) - /* The sysreg block is just a random collection of various functions... */ static struct bgpio_pdata vexpress_sysreg_sys_led_pdata = { @@ -94,7 +88,7 @@ static struct mfd_cell vexpress_sysreg_cells[] = { .name = "vexpress-syscfg", .num_resources = 1, .resources = (struct resource []) { - DEFINE_RES_MEM(SYS_CFGDATA, 0xc), + DEFINE_RES_MEM(SYS_MISC, 0x4c), }, } }; @@ -104,8 +98,6 @@ static int vexpress_sysreg_probe(struct platform_device *pdev) struct resource *mem; void __iomem *base; struct gpio_chip *mmc_gpio_chip; - int master; - u32 dt_hbi; mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!mem) @@ -115,21 +107,6 @@ static int vexpress_sysreg_probe(struct platform_device *pdev) if (!base) return -ENOMEM; - master = readl(base + SYS_MISC) & SYS_MISC_MASTERSITE ? - VEXPRESS_SITE_DB2 : VEXPRESS_SITE_DB1; - vexpress_config_set_master(master); - - /* Confirm board type against DT property, if available */ - if (of_property_read_u32(of_root, "arm,hbi", &dt_hbi) == 0) { - u32 id = readl(base + (master == VEXPRESS_SITE_DB1 ? - SYS_PROCID0 : SYS_PROCID1)); - u32 hbi = (id >> SYS_PROCIDx_HBI_SHIFT) & SYS_HBI_MASK; - - if (WARN_ON(dt_hbi != hbi)) - dev_warn(&pdev->dev, "DT HBI (%x) is not matching hardware (%x)!\n", - dt_hbi, hbi); - } - /* * Duplicated SYS_MCI pseudo-GPIO controller for compatibility with * older trees using sysreg node for MMC control lines. diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h index 65096c792d57..2f9dd072f11f 100644 --- a/include/linux/vexpress.h +++ b/include/linux/vexpress.h @@ -10,15 +10,6 @@ #include #include -#define VEXPRESS_SITE_MB 0 -#define VEXPRESS_SITE_DB1 1 -#define VEXPRESS_SITE_DB2 2 -#define VEXPRESS_SITE_MASTER 0xf - -/* Config infrastructure */ - -void vexpress_config_set_master(u32 site); - /* Config regmap API */ struct regmap *devm_regmap_init_vexpress_config(struct device *dev); From 70e4758aaae04a5b0cb53db47fd94eb1714fd0ac Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 29 Apr 2020 15:58:24 -0500 Subject: [PATCH 15/16] bus: vexpress-config: Support building as module Enable building vexpress-config driver as a module. Cc: Lorenzo Pieralisi Cc: Linus Walleij Cc: Greg Kroah-Hartman Reviewed-by: Sudeep Holla Acked-by: Liviu Dudau Signed-off-by: Rob Herring --- drivers/bus/Kconfig | 2 +- drivers/bus/vexpress-config.c | 10 ++++------ 2 files changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index 6d4e4497b59b..c16268c53831 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -183,7 +183,7 @@ config UNIPHIER_SYSTEM_BUS needed to use on-board devices connected to UniPhier SoCs. config VEXPRESS_CONFIG - bool "Versatile Express configuration bus" + tristate "Versatile Express configuration bus" default y if ARCH_VEXPRESS depends on ARM || ARM64 depends on OF diff --git a/drivers/bus/vexpress-config.c b/drivers/bus/vexpress-config.c index caa35a4cb34d..a58ac0c8e282 100644 --- a/drivers/bus/vexpress-config.c +++ b/drivers/bus/vexpress-config.c @@ -7,6 +7,7 @@ #include #include #include +#include #include #include #include @@ -407,15 +408,12 @@ static const struct platform_device_id vexpress_syscfg_id_table[] = { { "vexpress-syscfg", }, {}, }; +MODULE_DEVICE_TABLE(platform, vexpress_syscfg_id_table); static struct platform_driver vexpress_syscfg_driver = { .driver.name = "vexpress-syscfg", .id_table = vexpress_syscfg_id_table, .probe = vexpress_syscfg_probe, }; - -static int __init vexpress_syscfg_init(void) -{ - return platform_driver_register(&vexpress_syscfg_driver); -} -core_initcall(vexpress_syscfg_init); +module_platform_driver(vexpress_syscfg_driver); +MODULE_LICENSE("GPL v2"); From 848685c25da99d871bbd87369f3c3d6eead661ac Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 29 Apr 2020 15:58:25 -0500 Subject: [PATCH 16/16] ARM: vexpress: Don't select VEXPRESS_CONFIG CONFIG_VEXPRESS_CONFIG has 'default y if ARCH_VEXPRESS', so selecting is unnecessary. Selecting it also prevents setting CONFIG_VEXPRESS_CONFIG to a module. Cc: Lorenzo Pieralisi Cc: Linus Walleij Reviewed-by: Sudeep Holla Acked-by: Liviu Dudau Signed-off-by: Rob Herring --- arch/arm/mach-vexpress/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 065e12991663..8391a5b3cd78 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -19,7 +19,6 @@ menuconfig ARCH_VEXPRESS select POWER_SUPPLY select REGULATOR if MMC_ARMMMCI select REGULATOR_FIXED_VOLTAGE if REGULATOR - select VEXPRESS_CONFIG help This option enables support for systems using Cortex processor based ARM core and logic (FPGA) tiles on the Versatile Express motherboard,