Merge branch 'iomap' into cleanup

This commit is contained in:
Tony Lindgren 2012-02-28 14:27:01 -08:00
commit a5bee307ba
93 changed files with 447 additions and 273 deletions

View File

@ -15,11 +15,12 @@
#include <linux/linkage.h>
#include <plat/io.h>
#include <plat/board-ams-delta.h>
#include <mach/ams-delta-fiq.h>
#include "iomap.h"
/*
* GPIO related definitions, copied from arch/arm/plat-omap/gpio.c.
* Unfortunately, those were not placed in a separate header file.

View File

@ -22,6 +22,7 @@
#include <plat/board-ams-delta.h>
#include <asm/fiq.h>
#include <mach/ams-delta-fiq.h>
static struct fiq_handler fh = {

View File

@ -20,25 +20,27 @@
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/export.h>
#include <linux/io.h>
#include <media/soc_camera.h>
#include <asm/serial.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/io.h>
#include <plat/board-ams-delta.h>
#include <plat/keypad.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
#include "common.h"
#include <mach/hardware.h>
#include <mach/ams-delta-fiq.h>
#include <mach/camera.h>
#include <mach/ams-delta-fiq.h>
#include "iomap.h"
#include "common.h"
static u8 ams_delta_latch1_reg;
static u16 ams_delta_latch2_reg;

View File

@ -22,7 +22,6 @@
#include <linux/input.h>
#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -32,9 +31,13 @@
#include <plat/flash.h>
#include <plat/fpga.h>
#include <plat/keypad.h>
#include "common.h"
#include <plat/board.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
/* fsample is pretty close to p2-sample */
#define fsample_cpld_read(reg) __raw_readb(reg)

View File

@ -31,8 +31,6 @@
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -43,9 +41,11 @@
#include <plat/irda.h>
#include <plat/usb.h>
#include <plat/keypad.h>
#include "common.h"
#include <plat/flash.h>
#include <mach/hardware.h>
#include "common.h"
#include "board-h2.h"
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */

View File

@ -33,21 +33,21 @@
#include <asm/setup.h>
#include <asm/page.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/irqs.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include <plat/usb.h>
#include <plat/keypad.h>
#include <plat/dma.h>
#include "common.h"
#include <plat/flash.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include "common.h"
#include "board-h3.h"
/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */

View File

@ -27,7 +27,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
@ -41,7 +41,6 @@
#include <asm/mach/arch.h>
#include <plat/omap7xx.h>
#include "common.h"
#include <plat/board.h>
#include <plat/keypad.h>
#include <plat/usb.h>
@ -49,7 +48,7 @@
#include <mach/irqs.h>
#include <linux/delay.h>
#include "common.h"
/* LCD register definition */
#define OMAP_LCDC_CONTROL (0xfffec000 + 0x00)

View File

@ -26,7 +26,6 @@
#include <linux/input.h>
#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -37,9 +36,13 @@
#include <plat/tc.h>
#include <plat/usb.h>
#include <plat/keypad.h>
#include "common.h"
#include <plat/mmc.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define INNOVATOR1610_ETHR_START 0x04000300

View File

@ -21,7 +21,6 @@
#include <linux/workqueue.h>
#include <linux/delay.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -30,12 +29,15 @@
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/keypad.h>
#include "common.h"
#include <plat/hwa742.h>
#include <plat/lcd_mipid.h>
#include <plat/mmc.h>
#include <plat/clock.h>
#include <mach/hardware.h>
#include "common.h"
#define ADS7846_PENDOWN_GPIO 15
static const unsigned int nokia770_keymap[] = {

View File

@ -34,15 +34,11 @@
#include <linux/i2c.h>
#include <linux/leds.h>
#include <linux/smc91x.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/i2c/tps65010.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -51,6 +47,9 @@
#include <plat/usb.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include <mach/hardware.h>
#include "common.h"
/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */

View File

@ -28,7 +28,6 @@
#include <linux/interrupt.h>
#include <linux/apm-emulation.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -41,6 +40,9 @@
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
#include <mach/hardware.h>
#include "common.h"
#define PALMTE_USBDETECT_GPIO 0

View File

@ -24,8 +24,9 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/leds.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -39,10 +40,10 @@
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
#include "common.h"
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <mach/hardware.h>
#include "common.h"
#define PALMTT_USBDETECT_GPIO 0
#define PALMTT_CABLE_GPIO 1

View File

@ -27,8 +27,9 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -41,10 +42,10 @@
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
#include "common.h"
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <mach/hardware.h>
#include "common.h"
#define PALMZ71_USBDETECT_GPIO 0
#define PALMZ71_PENIRQ_GPIO 6

View File

@ -22,7 +22,6 @@
#include <linux/input.h>
#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -32,9 +31,13 @@
#include <plat/fpga.h>
#include <plat/flash.h>
#include <plat/keypad.h>
#include "common.h"
#include <plat/board.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
static const unsigned int p2_keymap[] = {
KEY(0, 0, KEY_UP),
KEY(1, 0, KEY_RIGHT),

View File

@ -28,7 +28,6 @@
#include <linux/errno.h>
#include <linux/export.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -40,10 +39,13 @@
#include <plat/usb.h>
#include <plat/tc.h>
#include <plat/board.h>
#include "common.h"
#include <plat/keypad.h>
#include <plat/board-sx1.h>
#include <mach/hardware.h>
#include "common.h"
/* Write to I2C device */
int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
{

View File

@ -27,18 +27,20 @@
#include <linux/smc91x.h>
#include <linux/export.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/board-voiceblue.h>
#include "common.h"
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include <plat/usb.h>
#include <mach/hardware.h>
#include "common.h"
static struct plat_serial8250_port voiceblue_ports[] = {
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000),

View File

@ -15,8 +15,8 @@
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <asm/mach-types.h>
@ -27,6 +27,9 @@
#include <plat/sram.h>
#include <plat/clkdev_omap.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "clock.h"
#include "opp.h"

View File

@ -15,10 +15,10 @@
*/
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <asm/mach-types.h> /* for machine_is_* */
@ -28,6 +28,9 @@
#include <plat/sram.h> /* for omap_sram_reprogram_clock() */
#include <plat/usb.h> /* for OTG_BASE */
#include <mach/hardware.h>
#include "iomap.h"
#include "clock.h"
/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */

View File

@ -58,5 +58,6 @@ void omap1_restart(char, const char *);
extern struct sys_timer omap1_timer;
extern bool omap_32k_timer_init(void);
extern void __init omap_init_consistent_dma_size(void);
#endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */

View File

@ -15,14 +15,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <mach/camera.h>
#include <mach/hardware.h>
#include <asm/mach/map.h>
#include "common.h"
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mux.h>
@ -30,6 +26,10 @@
#include <plat/omap7xx.h>
#include <plat/mcbsp.h>
#include <mach/camera.h>
#include <mach/hardware.h>
#include "common.h"
#include "clock.h"
/*-------------------------------------------------------------------------*/

View File

@ -19,11 +19,11 @@
*/
#include <linux/err.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/io.h>
#include <plat/dma.h>
#include <plat/tc.h>

View File

@ -6,13 +6,15 @@
* published by the Free Software Foundation.
*/
#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <plat/io.h>
#include <plat/tc.h>
#include <plat/flash.h>
#include <mach/hardware.h>
void omap1_set_vpp(struct platform_device *pdev, int enable)
{
static int count;

View File

@ -24,12 +24,15 @@
#include <linux/errno.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <plat/fpga.h>
#include <mach/hardware.h>
#include "iomap.h"
static void fpga_mask_irq(struct irq_data *d)
{
unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE;

View File

@ -218,6 +218,13 @@ static int __init omap16xx_gpio_init(void)
if (!cpu_is_omap16xx())
return -EINVAL;
/*
* Enable system clock for GPIO module.
* The CAM_CLK_CTRL *is* really the right place.
*/
omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
ULPD_CAM_CLK_CTRL);
for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++)
platform_device_register(omap16xx_gpio_dev[i]);

View File

@ -15,8 +15,11 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <plat/cpu.h>
#include <mach/hardware.h>
#define OMAP_DIE_ID_0 0xfffe1800
#define OMAP_DIE_ID_1 0xfffe1804
#define OMAP_PRODUCTION_ID_0 0xfffe2000

View File

@ -9,10 +9,12 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <mach/hardware.h>
#include <mach/io.h>
#include <mach/irqs.h>
#include <asm/hardware/gic.h>
#include "../../iomap.h"
.macro get_irqnr_preamble, base, tmp
.endm

View File

@ -2,4 +2,40 @@
* arch/arm/mach-omap1/include/mach/hardware.h
*/
#ifndef __MACH_HARDWARE_H
#define __MACH_HARDWARE_H
#ifndef __ASSEMBLER__
/*
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
extern u8 omap_readb(u32 pa);
extern u16 omap_readw(u32 pa);
extern u32 omap_readl(u32 pa);
extern void omap_writeb(u8 v, u32 pa);
extern void omap_writew(u16 v, u32 pa);
extern void omap_writel(u32 v, u32 pa);
#include <plat/tc.h>
/* Almost all documentation for chip and board memory maps assumes
* BM is clear. Most devel boards have a switch to control booting
* from NOR flash (using external chipselect 3) rather than mask ROM,
* which uses BM to interchange the physical CS0 and CS3 addresses.
*/
static inline u32 omap_cs0m_phys(void)
{
return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
? OMAP_CS3_PHYS : 0;
}
static inline u32 omap_cs3_phys(void)
{
return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
? 0 : OMAP_CS3_PHYS;
}
#endif
#endif
#include <plat/hardware.h>

View File

@ -1,5 +1,46 @@
/*
* arch/arm/mach-omap1/include/mach/io.h
*
* IO definitions for TI OMAP processors and boards
*
* Copied from arch/arm/mach-sa1100/include/mach/io.h
* Copyright (C) 1997-1999 Russell King
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Modifications:
* 06-12-1997 RMK Created.
* 07-04-1999 RMK Major cleanup
*/
#include <plat/io.h>
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
#define IO_SPACE_LIMIT 0xffffffff
/*
* We don't actually have real ISA nor PCI buses, but there is so many
* drivers out there that might just work if we fake them...
*/
#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
#endif

View File

@ -18,7 +18,8 @@
* Note that the is_lbus_device() test is not very efficient on 1510
* because of the strncmp().
*/
#ifdef CONFIG_ARCH_OMAP15XX
#if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
#include <plat/cpu.h>
/*
* OMAP-1510 Local Bus address offset

View File

@ -15,9 +15,12 @@
#include <asm/tlb.h>
#include <asm/mach/map.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include "iomap.h"
#include "common.h"
#include "clock.h"
extern void omap_check_revision(void);

View File

@ -0,0 +1,42 @@
/*
* IO mappings for OMAP1
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifdef __ASSEMBLER__
#define IOMEM(x) (x)
#else
#define IOMEM(x) ((void __force __iomem *)(x))
#endif
#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
/*
* ----------------------------------------------------------------------------
* Omap1 specific IO mapping
* ----------------------------------------------------------------------------
*/
#define OMAP1_IO_PHYS 0xFFFB0000
#define OMAP1_IO_SIZE 0x40000
#define OMAP1_IO_VIRT (OMAP1_IO_PHYS - OMAP1_IO_OFFSET)

View File

@ -42,11 +42,13 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <plat/cpu.h>
#include <mach/hardware.h>
#define IRQ_BANK(irq) ((irq) >> 5)
#define IRQ_BIT(irq) ((irq) & 0x1f)

View File

@ -27,9 +27,10 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <plat/dma.h>
#include <mach/hardware.h>
#include <mach/lcdc.h>
#include <plat/dma.h>
int omap_lcd_dma_running(void)
{

View File

@ -19,12 +19,15 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <mach/irqs.h>
#include <plat/dma.h>
#include <plat/mux.h>
#include <plat/cpu.h>
#include <plat/mcbsp.h>
#include <mach/irqs.h>
#include "iomap.h"
#define DPS_RSTCT2_PER_EN (1 << 0)
#define DSP_RSTCT2_WD_PER_EN (1 << 1)

View File

@ -49,7 +49,6 @@
#include <asm/mach/irq.h>
#include <plat/cpu.h>
#include <mach/irqs.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/tc.h>
@ -57,6 +56,9 @@
#include <plat/dma.h>
#include <plat/dmtimer.h>
#include <mach/irqs.h>
#include "iomap.h"
#include "pm.h"
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];

View File

@ -4,9 +4,10 @@
#include <linux/kernel.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <plat/prcm.h>
#include <mach/hardware.h>
void omap1_restart(char mode, const char *cmd)
{
/*

View File

@ -33,8 +33,12 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/io.h>
#include "iomap.h"
#include "pm.h"
.text

View File

@ -9,10 +9,14 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/io.h>
#include <mach/hardware.h>
#include "iomap.h"
.text
/*

View File

@ -45,14 +45,15 @@
#include <linux/io.h>
#include <asm/system.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/sched_clock.h>
#include <mach/hardware.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include "iomap.h"
#include "common.h"
#ifdef CONFIG_OMAP_MPU_TIMER

View File

@ -47,14 +47,17 @@
#include <linux/io.h>
#include <asm/system.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include "common.h"
#include <plat/dmtimer.h>
#include <mach/hardware.h>
#include "common.h"
/*
* ---------------------------------------------------------------------------
* 32KHz OS timer

View File

@ -33,6 +33,7 @@
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <plat/cpu.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/sdrc.h>

View File

@ -22,6 +22,7 @@
#include <asm/div64.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include "clock.h"
#include "cm-regbits-24xx.h"

View File

@ -14,11 +14,14 @@
*/
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/list.h>
#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"

View File

@ -21,8 +21,10 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <plat/hardware.h>
#include <plat/clock.h>
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
#include "cm2xxx_3xxx.h"

View File

@ -17,8 +17,10 @@
#include <linux/clk.h>
#include <linux/list.h>
#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"

View File

@ -22,6 +22,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <plat/cpu.h>
#include <plat/clock.h>
#include "clock.h"

View File

@ -21,6 +21,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <plat/hardware.h>
#include <plat/clock.h>
#include "clock.h"

View File

@ -20,14 +20,15 @@
#include <linux/clk.h>
#include <linux/list.h>
#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
#include "iomap.h"
#include "clock.h"
#include "clock3xxx.h"
#include "clock34xx.h"
#include "clock36xx.h"
#include "clock3517.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
#include "prm2xxx_3xxx.h"

View File

@ -26,8 +26,11 @@
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/clk.h>
#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
#include "iomap.h"
#include "clock.h"
#include "clock44xx.h"
#include "cm1_44xx.h"

View File

@ -18,8 +18,8 @@
#include <linux/err.h>
#include <linux/io.h>
#include "iomap.h"
#include "common.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"

View File

@ -18,8 +18,8 @@
#include <linux/err.h>
#include <linux/io.h>
#include "iomap.h"
#include "common.h"
#include "cm.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"

View File

@ -20,8 +20,8 @@
#include <linux/err.h>
#include <linux/io.h>
#include "iomap.h"
#include "common.h"
#include "cm.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"

View File

@ -17,12 +17,12 @@
#include <linux/clk.h>
#include <linux/io.h>
#include "common.h"
#include <plat/board.h>
#include <plat/mux.h>
#include <plat/clock.h>
#include "iomap.h"
#include "common.h"
#include "sdrc.h"
#include "control.h"

View File

@ -133,6 +133,8 @@ void am33xx_map_io(void);
void omap4_map_io(void);
void ti81xx_map_io(void);
extern void __init omap_init_consistent_dma_size(void);
/**
* omap_test_timeout - busy-loop, testing a condition
* @cond: condition to test until it evaluates to true
@ -235,5 +237,10 @@ static inline u32 omap4_mpuss_read_prev_context_state(void)
return 0;
}
#endif
struct omap_sdrc_params;
extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1);
#endif /* __ASSEMBLER__ */
#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */

View File

@ -15,9 +15,10 @@
#include <linux/kernel.h>
#include <linux/io.h>
#include "common.h"
#include <plat/sdrc.h>
#include "iomap.h"
#include "common.h"
#include "cm-regbits-34xx.h"
#include "prm-regbits-34xx.h"
#include "prm2xxx_3xxx.h"

View File

@ -16,7 +16,6 @@
#ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H
#define __ARCH_ARM_MACH_OMAP2_CONTROL_H
#include <mach/io.h>
#include <mach/ctrl_module_core_44xx.h>
#include <mach/ctrl_module_wkup_44xx.h>
#include <mach/ctrl_module_pad_core_44xx.h>

View File

@ -24,7 +24,7 @@
#include <asm/mach/map.h>
#include <asm/pmu.h>
#include <plat/tc.h>
#include "iomap.h"
#include <plat/board.h>
#include <plat/mcbsp.h>
#include <plat/mmc.h>

View File

@ -30,6 +30,7 @@
#include <plat/omap-pm.h>
#include "common.h"
#include "iomap.h"
#include "mux.h"
#include "control.h"
#include "display.h"

View File

@ -21,6 +21,8 @@
#include <linux/clk.h>
#include <linux/err.h>
#include "iomap.h"
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Alexander Shishkin");

View File

@ -16,6 +16,7 @@
#include <asm/mach/flash.h>
#include <plat/cpu.h>
#include <plat/nand.h>
#include <plat/board.h>
#include <plat/gpmc.h>

View File

@ -18,6 +18,7 @@
#include <asm/mach/flash.h>
#include <plat/cpu.h>
#include <plat/onenand.h>
#include <plat/board.h>
#include <plat/gpmc.h>

View File

@ -1,5 +1,49 @@
/*
* arch/arm/mach-omap2/include/mach/io.h
*
* IO definitions for TI OMAP processors and boards
*
* Copied from arch/arm/mach-sa1100/include/mach/io.h
* Copyright (C) 1997-1999 Russell King
*
* Copyright (C) 2009 Texas Instruments
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Modifications:
* 06-12-1997 RMK Created.
* 07-04-1999 RMK Major cleanup
*/
#include <plat/io.h>
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
#define IO_SPACE_LIMIT 0xffffffff
/*
* We don't actually have real ISA nor PCI buses, but there is so many
* drivers out there that might just work if we fake them...
*/
#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
#endif

View File

@ -24,27 +24,24 @@
#include <linux/omapfb.h>
#include <asm/tlb.h>
#include <asm/mach/map.h>
#include <plat/sram.h>
#include <plat/sdrc.h>
#include <plat/serial.h>
#include <plat/omap-pm.h>
#include <plat/omap_hwmod.h>
#include <plat/multi.h>
#include "iomap.h"
#include "voltage.h"
#include "powerdomain.h"
#include "clockdomain.h"
#include "common.h"
#include "clock2xxx.h"
#include "clock3xxx.h"
#include "clock44xx.h"
#include "common.h"
#include <plat/omap-pm.h>
#include "voltage.h"
#include "powerdomain.h"
#include "clockdomain.h"
#include <plat/omap_hwmod.h>
#include <plat/multi.h>
#include "common.h"
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
@ -490,43 +487,3 @@ void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
_omap2_init_reprogram_sdrc();
}
}
/*
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
u8 omap_readb(u32 pa)
{
return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_readb);
u16 omap_readw(u32 pa)
{
return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_readw);
u32 omap_readl(u32 pa)
{
return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_readl);
void omap_writeb(u8 v, u32 pa)
{
__raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_writeb);
void omap_writew(u16 v, u32 pa)
{
__raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_writew);
void omap_writel(u32 v, u32 pa)
{
__raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_writel);

View File

@ -1,13 +1,5 @@
/*
* arch/arm/plat-omap/include/mach/io.h
*
* IO definitions for TI OMAP processors and boards
*
* Copied from arch/arm/mach-sa1100/include/mach/io.h
* Copyright (C) 1997-1999 Russell King
*
* Copyright (C) 2009 Texas Instruments
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
* IO mappings for OMAP2+
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@ -28,30 +20,6 @@
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Modifications:
* 06-12-1997 RMK Created.
* 07-04-1999 RMK Major cleanup
*/
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
#include <mach/hardware.h>
#define IO_SPACE_LIMIT 0xffffffff
/*
* We don't actually have real ISA nor PCI buses, but there is so many
* drivers out there that might just work if we fake them...
*/
#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
/*
* ----------------------------------------------------------------------------
* I/O mapping
* ----------------------------------------------------------------------------
*/
#ifdef __ASSEMBLER__
@ -60,13 +28,9 @@
#define IOMEM(x) ((void __force __iomem *)(x))
#endif
#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
#define OMAP2_L3_IO_OFFSET 0x90000000
#define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */
#define OMAP2_L4_IO_OFFSET 0xb2000000
#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */
@ -85,16 +49,6 @@
#define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */
#define OMAP2_EMU_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_EMU_IO_OFFSET)
/*
* ----------------------------------------------------------------------------
* Omap1 specific IO mapping
* ----------------------------------------------------------------------------
*/
#define OMAP1_IO_PHYS 0xFFFB0000
#define OMAP1_IO_SIZE 0x40000
#define OMAP1_IO_VIRT (OMAP1_IO_PHYS - OMAP1_IO_OFFSET)
/*
* ----------------------------------------------------------------------------
* Omap2 specific IO mapping
@ -247,31 +201,3 @@
/* 0x4e000000 --> 0xfd300000 */
#define OMAP44XX_DMM_SIZE SZ_1M
#define OMAP44XX_DMM_VIRT (OMAP44XX_EMIF2_VIRT + OMAP44XX_EMIF2_SIZE)
/*
* ----------------------------------------------------------------------------
* Omap specific register access
* ----------------------------------------------------------------------------
*/
#ifndef __ASSEMBLER__
/*
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
extern u8 omap_readb(u32 pa);
extern u16 omap_readw(u32 pa);
extern u32 omap_readl(u32 pa);
extern void omap_writeb(u8 v, u32 pa);
extern void omap_writew(u16 v, u32 pa);
extern void omap_writel(u32 v, u32 pa);
struct omap_sdrc_params;
extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1);
extern void __init omap_init_consistent_dma_size(void);
#endif
#endif

View File

@ -14,10 +14,13 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/exception.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include "iomap.h"
/* selected INTC register offsets */

View File

@ -23,11 +23,12 @@
#include <asm/cacheflush.h>
#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
#include <mach/omap-secure.h>
#include "iomap.h"
#include "common.h"
#include "clockdomain.h"
/* SCU base address */

View File

@ -28,6 +28,8 @@
* http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/
*/
#include <plat/hardware.h>
#include "opp2xxx.h"
#include "sdrc.h"
#include "clock.h"

View File

@ -26,6 +26,8 @@
* This is technically part of the OMAP2xxx clock code.
*/
#include <plat/hardware.h>
#include "opp2xxx.h"
#include "sdrc.h"
#include "clock.h"

View File

@ -26,7 +26,6 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/time.h>
#include <linux/gpio.h>
@ -35,12 +34,13 @@
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
#include <mach/irqs.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/dma.h>
#include <plat/board.h>
#include <mach/irqs.h>
#include "common.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
@ -49,7 +49,6 @@
#include "sdrc.h"
#include "pm.h"
#include "control.h"
#include "powerdomain.h"
#include "clockdomain.h"
@ -258,26 +257,6 @@ static int omap2_pm_begin(suspend_state_t state)
return 0;
}
static int omap2_pm_suspend(void)
{
u32 wken_wkup, mir1;
wken_wkup = omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
wken_wkup &= ~OMAP24XX_EN_GPT1_MASK;
omap2_prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
/* Mask GPT1 */
mir1 = omap_readl(0x480fe0a4);
omap_writel(1 << 5, 0x480fe0ac);
omap2_enter_full_retention();
omap_writel(mir1, 0x480fe0a4);
omap2_prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
return 0;
}
static int omap2_pm_enter(suspend_state_t state)
{
int ret = 0;
@ -285,7 +264,7 @@ static int omap2_pm_enter(suspend_state_t state)
switch (state) {
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
ret = omap2_pm_suspend();
omap2_enter_full_retention();
break;
default:
ret = -EINVAL;

View File

@ -15,8 +15,8 @@
#include <linux/err.h>
#include <linux/io.h>
#include "iomap.h"
#include "common.h"
#include "prcm_mpu44xx.h"
#include "cm-regbits-44xx.h"

View File

@ -17,10 +17,11 @@
#include <linux/err.h>
#include <linux/io.h>
#include "common.h"
#include <plat/cpu.h>
#include <plat/prcm.h>
#include "iomap.h"
#include "common.h"
#include "vp.h"
#include "prm44xx.h"
#include "prm-regbits-44xx.h"

View File

@ -16,8 +16,8 @@
#include <linux/err.h>
#include <linux/io.h>
#include "iomap.h"
#include "common.h"
#include "prm44xx.h"
#include "prminst44xx.h"
#include "prm-regbits-44xx.h"

View File

@ -17,7 +17,6 @@
#include <linux/err.h>
#include <linux/io.h>
#include <plat/io.h>
#include "common.h"
#include <plat/clock.h>
#include <plat/sdrc.h>

View File

@ -24,13 +24,14 @@
#include <linux/clk.h>
#include <linux/io.h>
#include "common.h"
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/sdrc.h>
#include "iomap.h"
#include "common.h"
#include "prm2xxx_3xxx.h"
#include "clock.h"
#include <plat/sdrc.h>
#include "sdrc.h"
/* Memory timing, DLL mode flags */

View File

@ -27,7 +27,6 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/io.h>
#include <plat/omap24xx.h>

View File

@ -23,10 +23,13 @@
* MA 02111-1307 USA
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <plat/sram.h>
#include <mach/io.h>
#include <asm/assembler.h>
#include <plat/hardware.h>
#include <plat/sram.h>
#include "iomap.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#include "sdrc.h"

View File

@ -29,10 +29,12 @@
* These crashes may be intermittent.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/io.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "sdrc.h"

View File

@ -29,10 +29,12 @@
* These crashes may be intermittent.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/io.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "sdrc.h"

View File

@ -26,11 +26,12 @@
* MA 02111-1307 USA
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/hardware.h>
#include <mach/io.h>
#include "iomap.h"
#include "sdrc.h"
#include "cm2xxx_3xxx.h"

View File

@ -21,6 +21,7 @@
#include <asm/sched_clock.h>
#include <plat/hardware.h>
#include <plat/common.h>
#include <plat/board.h>

View File

@ -164,6 +164,8 @@ static inline void set_gdma_dev(int req, int dev)
}
#else
#define set_gdma_dev(req, dev) do {} while (0)
#define omap_readl(reg) 0
#define omap_writel(val, reg) do {} while (0)
#endif
void omap_set_dma_priority(int lch, int dst_port, int priority)

View File

@ -43,6 +43,8 @@
#include <plat/dmtimer.h>
#include <mach/hardware.h>
static LIST_HEAD(omap_timer_list);
static DEFINE_SPINLOCK(dm_timer_lock);

View File

@ -43,6 +43,12 @@
#endif
#include <plat/serial.h>
#ifdef __ASSEMBLER__
#define IOMEM(x) (x)
#else
#define IOMEM(x) ((void __force __iomem *)(x))
#endif
/*
* ---------------------------------------------------------------------------
* Common definitions for all OMAP processors

View File

@ -12,6 +12,8 @@
#ifndef CONFIG_ARCH_OMAP1
#warning Please update the board to use matrix-keypad driver
#define omap_readw(reg) 0
#define omap_writew(val, reg) do {} while (0)
#endif
#include <linux/input/matrix_keypad.h>

View File

@ -84,23 +84,6 @@
#define EMIFS_CCS(n) (EMIFS_CS0_CONFIG + (4 * (n)))
#define EMIFS_ACS(n) (EMIFS_ACS0 + (4 * (n)))
/* Almost all documentation for chip and board memory maps assumes
* BM is clear. Most devel boards have a switch to control booting
* from NOR flash (using external chipselect 3) rather than mask ROM,
* which uses BM to interchange the physical CS0 and CS3 addresses.
*/
static inline u32 omap_cs0_phys(void)
{
return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
? OMAP_CS3_PHYS : 0;
}
static inline u32 omap_cs3_phys(void)
{
return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
? 0 : OMAP_CS3_PHYS;
}
#endif /* __ASSEMBLER__ */
#endif /* __ASM_ARCH_TC_H */

View File

@ -3,6 +3,7 @@
#ifndef __ASM_ARCH_OMAP_USB_H
#define __ASM_ARCH_OMAP_USB_H
#include <linux/io.h>
#include <linux/usb/musb.h>
#include <plat/board.h>
@ -105,6 +106,46 @@ extern int omap4430_phy_set_clk(struct device *dev, int on);
extern int omap4430_phy_init(struct device *dev);
extern int omap4430_phy_exit(struct device *dev);
extern int omap4430_phy_suspend(struct device *dev, int suspend);
/*
* NOTE: Please update omap USB drivers to use ioremap + read/write
*/
#define OMAP2_L4_IO_OFFSET 0xb2000000
#define IOMEM(x) ((void __force __iomem *)(x))
#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET)
static inline u8 omap_readb(u32 pa)
{
return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
}
static inline u16 omap_readw(u32 pa)
{
return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
}
static inline u32 omap_readl(u32 pa)
{
return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
}
static inline void omap_writeb(u8 v, u32 pa)
{
__raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
}
static inline void omap_writew(u16 v, u32 pa)
{
__raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
}
static inline void omap_writel(u32 v, u32 pa)
{
__raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
}
#endif
extern void am35x_musb_reset(void);

View File

@ -26,8 +26,11 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <asm/system.h>
#include <linux/spinlock.h>
#include <asm/system.h>
#include <plat/cpu.h>
#include <plat/mux.h>
#ifdef CONFIG_OMAP_MUX

View File

@ -31,11 +31,10 @@
#include "sram.h"
/* XXX These "sideways" includes are a sign that something is wrong */
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
/* XXX These "sideways" includes will disappear when sram.c becomes a driver */
#include "../mach-omap2/iomap.h"
#include "../mach-omap2/prm2xxx_3xxx.h"
#include "../mach-omap2/sdrc.h"
#endif
#define OMAP1_SRAM_PA 0x20000000
#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)

View File

@ -29,6 +29,10 @@
#include <plat/usb.h>
#include <plat/board.h>
#include <mach/hardware.h>
#include "../mach-omap2/common.h"
#ifdef CONFIG_ARCH_OMAP_OTG
void __init

View File

@ -26,6 +26,8 @@
#include <asm/io.h>
#include <plat/cpu.h>
#define RNG_OUT_REG 0x00 /* Output register */
#define RNG_STAT_REG 0x04 /* Status register
[0] = STAT_BUSY */

View File

@ -1064,13 +1064,6 @@ static void omap_gpio_mod_init(struct gpio_bank *bank, int id)
+ OMAP1610_GPIO_IRQSTATUS1);
__raw_writew(0x0014, bank->base
+ OMAP1610_GPIO_SYSCONFIG);
/*
* Enable system clock for GPIO module.
* The CAM_CLK_CTRL *is* really the right place.
*/
omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
ULPD_CAM_CLK_CTRL);
}
if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
__raw_writel(0xffffffff, bank->base

View File

@ -3272,11 +3272,6 @@ static void _omap_dispc_initial_config(void)
if (dss_has_feature(FEAT_FUNCGATED))
REG_FLD_MOD(DISPC_CONFIG, 1, 9, 9);
/* L3 firewall setting: enable access to OCM RAM */
/* XXX this should be somewhere in plat-omap */
if (cpu_is_omap24xx())
__raw_writel(0x402000b0, OMAP2_L3_IO_ADDRESS(0x680050a0));
_dispc_setup_color_conv_coef();
dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY);

View File

@ -33,7 +33,10 @@
#include <linux/pm_runtime.h>
#include <video/omapdss.h>
#include <plat/cpu.h>
#include <plat/clock.h>
#include "dss.h"
#include "dss_features.h"