mirror of
https://github.com/torvalds/linux.git
synced 2024-12-20 01:52:13 +00:00
Amlogic 64-bit platforms: DT updates for v4.15
- new SoC support: A113D - new boards: Tronsmart Vega S96, Khadas vim2 - reserved memory fixups - gpio-names cleanups - MMC cleanups, enable high-speed modes - misc cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAlnsbzwACgkQWTcYmtP7 xmWwSw/+LBr7iNv9ugxgfShcd8ugecjJm7eBMD9zKMJaHw+1AUxhexZsCyUQVjDy UjAeTTMsugTzIEvQoSI97h82K3uE7/3zqU+UaWziWILegb8b9VnYVzjHUoodNE9Z /9gbIb7P55rlJ1BN0zzXcsvEjvC7TrfklgXBfIBK0Ob2zqDHGpiWOFnrQiuZNweA tgSemkT4ELZYAksXszFhU1o87QW5IRqXwNX5ech7p3UpUTdDnY1MPNbLRRh9tVWi G7EtLJfbSPEHczBBtfcxQkagpk2TjVStMpYgrAaa3eMG5Ervdh3QrdGp8B7bObPY rZgYAU1x7q3PBWm07IpnlnprMC3RHP7wdirXVKMNW1DbYqRBoyGeTc9pF+DgiMNP wcxsbQgotSZbeke6ODPaP2xEtIqWCgTee/4P6zjOYfsXxphtVkdfLGvICwpximUj CqbXZSsn+pg4g1IsGU3EcVLbFzq2A+uv5hkV18b9ouDIN0mm7+/mpyaLeQ8wrl2U 5f+dCbrU4ypYosnOQIZKla8kHwutWmur6a9+VBPSEVWMXzdUUmBUicxgUYi5DMLZ SLXBklAZ74YqnFNZvrNaLvaD2GR5COU8NpW9S3PBxsUqXa57jMUAAOzbeLLvRB87 57S3pR7f+thG93pe8JFfP/ciVcnAGn9oQkV5LU8k6lTd7gaxtEw= =bJwM -----END PGP SIGNATURE----- Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Pull "Amlogic 64-bit platforms: DT updates for v4.15" from Kevin Hilman: - new SoC support: A113D - new boards: Tronsmart Vega S96, Khadas vim2 - reserved memory fixups - gpio-names cleanups - MMC cleanups, enable high-speed modes - misc cleanups * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-axg: add initial A113D SoC DT support dt-bindings: arm: amlogic: Add Meson AXG binding ARM64: dts: meson-gx: remove unnecessary uart compatible ARM64: dts: meson-gx: remove unnecessary clocks properties ARM64: dts: meson-gxl: Add alternate ARM Trusted Firmware reserved memory zone ARM64: dts: meson-gxm: enable HS400 on the vim2 ARM64: dts: meson-gxbb-nexbox-a95x: Enable USB Nodes dt-bindings: arm: amlogic: Add Tronsmart Vega S96 binding ARM64: dts: meson-gxm: Add Vega S96 board ARM64: dts: meson-gxm: Add support for Khadas VIM2 ARM64: dts: meson-gxl: Take eMMC data strobe out of eMMC pins ARM64: dts: meson-gxl: adjust libretech-cc gpio-line-names ARM64: dts: meson-gxl: adjust kvim gpio-line-names ARM64: dts: meson-gxbb: adjust odroid-c2 gpio-line-names ARM64: dts: meson-gxbb: adjust nanopi-k2 gpio-line-names ARM64: dts: meson-gx: adjust gpio-ranges for TEST_N ARM64: dts: meson-gx: remove gpio offset ARM: dts: meson8: remove gpio offset ARM64: dts: meson-gxl-libretech-cc: enable internal phy leds ARM64: dts: meson-gxl-libretech-cc: enable saradc
This commit is contained in:
Arnd Bergmann
commit
a5494aed0d
@ -41,6 +41,10 @@ Boards with the Amlogic Meson GXM S912 SoC shall have the following properties:
|
||||
Required root node property:
|
||||
compatible: "amlogic,s912", "amlogic,meson-gxm";
|
||||
|
||||
Boards with the Amlogic Meson AXG A113D SoC shall have the following properties:
|
||||
Required root node property:
|
||||
compatible: "amlogic,a113d", "amlogic,meson-axg";
|
||||
|
||||
Board compatible values (alphabetically, grouped by SoC):
|
||||
|
||||
- "geniatech,atv1200" (Meson6)
|
||||
@ -71,8 +75,12 @@ Board compatible values (alphabetically, grouped by SoC):
|
||||
|
||||
- "amlogic,q200" (Meson gxm s912)
|
||||
- "amlogic,q201" (Meson gxm s912)
|
||||
- "khadas,vim2" (Meson gxm s912)
|
||||
- "kingnovel,r-box-pro" (Meson gxm S912)
|
||||
- "nexbox,a1" (Meson gxm s912)
|
||||
- "tronsmart,vega-s96" (Meson gxm s912)
|
||||
|
||||
- "amlogic,s400" (Meson axg a113d)
|
||||
|
||||
Amlogic Meson Firmware registers Interface
|
||||
------------------------------------------
|
||||
|
||||
@ -146,7 +146,7 @@
|
||||
reg-names = "mux", "pull", "gpio";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-ranges = <&pinctrl_aobus 0 120 16>;
|
||||
gpio-ranges = <&pinctrl_aobus 0 0 16>;
|
||||
};
|
||||
|
||||
uart_ao_a_pins: uart_ao_a {
|
||||
|
||||
@ -130,7 +130,7 @@
|
||||
reg-names = "mux", "pull", "gpio";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-ranges = <&pinctrl_aobus 0 130 16>;
|
||||
gpio-ranges = <&pinctrl_aobus 0 0 16>;
|
||||
};
|
||||
|
||||
uart_ao_a_pins: uart_ao_a {
|
||||
|
||||
@ -1,3 +1,4 @@
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
|
||||
@ -15,10 +16,12 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
|
||||
|
||||
always := $(dtb-y)
|
||||
subdir-y := $(dts-dirs)
|
||||
|
||||
22
arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
Normal file
22
arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
Normal file
@ -0,0 +1,22 @@
|
||||
/*
|
||||
* Copyright (c) 2017 Amlogic, Inc. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-axg.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg";
|
||||
model = "Amlogic Meson AXG S400 Development Board";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart_AO;
|
||||
};
|
||||
};
|
||||
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
};
|
||||
204
arch/arm64/boot/dts/amlogic/meson-axg.dtsi
Normal file
204
arch/arm64/boot/dts/amlogic/meson-axg.dtsi
Normal file
@ -0,0 +1,204 @@
|
||||
/*
|
||||
* Copyright (c) 2017 Amlogic, Inc. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
/ {
|
||||
compatible = "amlogic,meson-axg";
|
||||
|
||||
interrupt-parent = <&gic>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
/* 16 MiB reserved for Hardware ROM Firmware */
|
||||
hwrom_reserved: hwrom@0 {
|
||||
reg = <0x0 0x0 0x0 0x1000000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
/* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
|
||||
secmon_reserved: secmon@5000000 {
|
||||
reg = <0x0 0x05000000 0x0 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <0x2>;
|
||||
#size-cells = <0x0>;
|
||||
|
||||
cpu0: cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53", "arm,armv8";
|
||||
reg = <0x0 0x0>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&l2>;
|
||||
};
|
||||
|
||||
cpu1: cpu@1 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53", "arm,armv8";
|
||||
reg = <0x0 0x1>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&l2>;
|
||||
};
|
||||
|
||||
cpu2: cpu@2 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53", "arm,armv8";
|
||||
reg = <0x0 0x2>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&l2>;
|
||||
};
|
||||
|
||||
cpu3: cpu@3 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53", "arm,armv8";
|
||||
reg = <0x0 0x3>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&l2>;
|
||||
};
|
||||
|
||||
l2: l2-cache0 {
|
||||
compatible = "cache";
|
||||
};
|
||||
};
|
||||
|
||||
arm-pmu {
|
||||
compatible = "arm,cortex-a53-pmu";
|
||||
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
|
||||
};
|
||||
|
||||
psci {
|
||||
compatible = "arm,psci-1.0";
|
||||
method = "smc";
|
||||
};
|
||||
|
||||
timer {
|
||||
compatible = "arm,armv8-timer";
|
||||
interrupts = <GIC_PPI 13
|
||||
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 14
|
||||
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 11
|
||||
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 10
|
||||
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
|
||||
};
|
||||
|
||||
xtal: xtal-clk {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <24000000>;
|
||||
clock-output-names = "xtal";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
soc {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
cbus: cbus@ffd00000 {
|
||||
compatible = "simple-bus";
|
||||
reg = <0x0 0xffd00000 0x0 0x25000>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
|
||||
|
||||
uart_A: serial@24000 {
|
||||
compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
|
||||
reg = <0x0 0x24000 0x0 0x14>;
|
||||
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart_B: serial@23000 {
|
||||
compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
|
||||
reg = <0x0 0x23000 0x0 0x14>;
|
||||
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
gic: interrupt-controller@ffc01000 {
|
||||
compatible = "arm,gic-400";
|
||||
reg = <0x0 0xffc01000 0 0x1000>,
|
||||
<0x0 0xffc02000 0 0x2000>,
|
||||
<0x0 0xffc04000 0 0x2000>,
|
||||
<0x0 0xffc06000 0 0x2000>;
|
||||
interrupt-controller;
|
||||
interrupts = <GIC_PPI 9
|
||||
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
|
||||
#interrupt-cells = <3>;
|
||||
#address-cells = <0>;
|
||||
};
|
||||
|
||||
mailbox: mailbox@ff63dc00 {
|
||||
compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
|
||||
reg = <0 0xff63dc00 0 0x400>;
|
||||
interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
|
||||
#mbox-cells = <1>;
|
||||
};
|
||||
|
||||
sram: sram@fffc0000 {
|
||||
compatible = "amlogic,meson-axg-sram", "mmio-sram";
|
||||
reg = <0x0 0xfffc0000 0x0 0x20000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x0 0xfffc0000 0x20000>;
|
||||
|
||||
cpu_scp_lpri: scp-shmem@0 {
|
||||
compatible = "amlogic,meson-axg-scp-shmem";
|
||||
reg = <0x13000 0x400>;
|
||||
};
|
||||
|
||||
cpu_scp_hpri: scp-shmem@200 {
|
||||
compatible = "amlogic,meson-axg-scp-shmem";
|
||||
reg = <0x13400 0x400>;
|
||||
};
|
||||
};
|
||||
|
||||
aobus: aobus@ff800000 {
|
||||
compatible = "simple-bus";
|
||||
reg = <0x0 0xff800000 0x0 0x100000>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
|
||||
|
||||
uart_AO: serial@3000 {
|
||||
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
|
||||
reg = <0x0 0x3000 0x0 0x18>;
|
||||
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
|
||||
clocks = <&xtal>, <&xtal>, <&xtal>;
|
||||
clock-names = "xtal", "pclk", "baud";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart_AO_B: serial@4000 {
|
||||
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
|
||||
reg = <0x0 0x4000 0x0 0x18>;
|
||||
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
|
||||
clocks = <&xtal>, <&xtal>, <&xtal>;
|
||||
clock-names = "xtal", "pclk", "baud";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -213,7 +213,7 @@
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>;
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
|
||||
@ -225,18 +225,16 @@
|
||||
};
|
||||
|
||||
uart_A: serial@84c0 {
|
||||
compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
|
||||
compatible = "amlogic,meson-gx-uart";
|
||||
reg = <0x0 0x84c0 0x0 0x14>;
|
||||
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
|
||||
clocks = <&xtal>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart_B: serial@84dc {
|
||||
compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
|
||||
compatible = "amlogic,meson-gx-uart";
|
||||
reg = <0x0 0x84dc 0x0 0x14>;
|
||||
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
|
||||
clocks = <&xtal>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
@ -279,10 +277,9 @@
|
||||
};
|
||||
|
||||
uart_C: serial@8700 {
|
||||
compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
|
||||
compatible = "amlogic,meson-gx-uart";
|
||||
reg = <0x0 0x8700 0x0 0x14>;
|
||||
interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
|
||||
clocks = <&xtal>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
@ -391,14 +388,14 @@
|
||||
};
|
||||
|
||||
uart_AO: serial@4c0 {
|
||||
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
|
||||
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
|
||||
reg = <0x0 0x004c0 0x0 0x14>;
|
||||
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart_AO_B: serial@4e0 {
|
||||
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
|
||||
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
|
||||
reg = <0x0 0x004e0 0x0 0x14>;
|
||||
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
|
||||
status = "disabled";
|
||||
|
||||
@ -183,7 +183,9 @@
|
||||
"VCCK En", "CON1 Header Pin31",
|
||||
"I2S Header Pin6", "IR In", "I2S Header Pin7",
|
||||
"I2S Header Pin3", "I2S Header Pin4",
|
||||
"I2S Header Pin5", "HDMI CEC", "SYS LED";
|
||||
"I2S Header Pin5", "HDMI CEC", "SYS LED",
|
||||
/* GPIO_TEST_N */
|
||||
"";
|
||||
};
|
||||
|
||||
&pinctrl_periphs {
|
||||
@ -229,11 +231,9 @@
|
||||
"Bluetooth UART TX", "Bluetooth UART RX",
|
||||
"Bluetooth UART CTS", "Bluetooth UART RTS",
|
||||
"", "", "", "WIFI 32K", "Bluetooth Enable",
|
||||
"Bluetooth WAKE HOST",
|
||||
"Bluetooth WAKE HOST", "",
|
||||
/* Bank GPIOCLK */
|
||||
"", "CON1 Header Pin35", "", "",
|
||||
/* GPIO_TEST_N */
|
||||
"";
|
||||
"", "CON1 Header Pin35", "", "";
|
||||
};
|
||||
|
||||
&pwm_ef {
|
||||
@ -302,7 +302,7 @@
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "disabled";
|
||||
pinctrl-0 = <&emmc_pins>;
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
|
||||
@ -88,6 +88,18 @@
|
||||
};
|
||||
};
|
||||
|
||||
usb_pwr: regulator-usb-pwrs {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "USB_PWR";
|
||||
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
|
||||
gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vddio_card: gpio-regulator {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
@ -272,7 +284,7 @@
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>;
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
@ -294,3 +306,20 @@
|
||||
pinctrl-0 = <&uart_ao_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb0_phy {
|
||||
status = "okay";
|
||||
phy-supply = <&usb_pwr>;
|
||||
};
|
||||
|
||||
&usb1_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -194,7 +194,9 @@
|
||||
"USB HUB nRESET", "USB OTG Power En",
|
||||
"J7 Header Pin2", "IR In", "J7 Header Pin4",
|
||||
"J7 Header Pin6", "J7 Header Pin5", "J7 Header Pin7",
|
||||
"HDMI CEC", "SYS LED";
|
||||
"HDMI CEC", "SYS LED",
|
||||
/* GPIO_TEST_N */
|
||||
"";
|
||||
};
|
||||
|
||||
&pinctrl_periphs {
|
||||
@ -233,11 +235,9 @@
|
||||
"J2 Header Pin12", "J2 Header Pin13",
|
||||
"J2 Header Pin8", "J2 Header Pin10",
|
||||
"", "", "", "", "",
|
||||
"J2 Header Pin11", "", "J2 Header Pin7",
|
||||
"J2 Header Pin11", "", "J2 Header Pin7", "",
|
||||
/* Bank GPIOCLK */
|
||||
"", "", "", "",
|
||||
/* GPIO_TEST_N */
|
||||
"";
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
@ -271,7 +271,7 @@
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>;
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
|
||||
@ -242,7 +242,7 @@
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>;
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
|
||||
@ -199,7 +199,7 @@
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>;
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
|
||||
@ -379,15 +379,21 @@
|
||||
reg-names = "mux", "pull", "pull-enable", "gpio";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-ranges = <&pinctrl_periphs 0 14 120>;
|
||||
gpio-ranges = <&pinctrl_periphs 0 0 119>;
|
||||
};
|
||||
|
||||
emmc_pins: emmc {
|
||||
mux {
|
||||
groups = "emmc_nand_d07",
|
||||
"emmc_cmd",
|
||||
"emmc_clk",
|
||||
"emmc_ds";
|
||||
"emmc_clk";
|
||||
function = "emmc";
|
||||
};
|
||||
};
|
||||
|
||||
emmc_ds_pins: emmc-ds {
|
||||
mux {
|
||||
groups = "emmc_ds";
|
||||
function = "emmc";
|
||||
};
|
||||
};
|
||||
|
||||
@ -141,7 +141,7 @@
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>;
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
|
||||
@ -122,7 +122,9 @@
|
||||
"J9 Header Pin33",
|
||||
"IR In",
|
||||
"HDMI CEC",
|
||||
"SYS LED";
|
||||
"SYS LED",
|
||||
/* GPIO_TEST_N */
|
||||
"";
|
||||
};
|
||||
|
||||
&pinctrl_periphs {
|
||||
@ -163,9 +165,7 @@
|
||||
"WIFI 32K", "Bluetooth Enable",
|
||||
"Bluetooth WAKE HOST",
|
||||
/* Bank GPIOCLK */
|
||||
"", "J9 Header Pin39",
|
||||
/* GPIO_TEST_N */
|
||||
"";
|
||||
"", "J9 Header Pin39";
|
||||
};
|
||||
|
||||
&pwm_AO_ab {
|
||||
|
||||
@ -96,6 +96,13 @@
|
||||
regulator-settling-time-down-us = <50000>;
|
||||
};
|
||||
|
||||
vddio_ao18: regulator-vddio_ao18 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_AO18";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vddio_boot: regulator-vddio_boot {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_BOOT";
|
||||
@ -121,6 +128,11 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&internal_phy {
|
||||
pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&ir {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&remote_input_ao_pins>;
|
||||
@ -149,7 +161,9 @@
|
||||
"7J1 Header Pin12",
|
||||
"IR In",
|
||||
"9J3 Switch HDMI CEC/7J1 Header Pin11",
|
||||
"7J1 Header Pin13";
|
||||
"7J1 Header Pin13",
|
||||
/* GPIO_TEST_N */
|
||||
"7J1 Header Pin15";
|
||||
};
|
||||
|
||||
&pinctrl_periphs {
|
||||
@ -191,9 +205,12 @@
|
||||
"7J1 Header Pin32", "7J1 Header Pin29",
|
||||
"7J1 Header Pin31",
|
||||
/* Bank GPIOCLK */
|
||||
"7J1 Header Pin7", "",
|
||||
/* GPIO_TEST_N */
|
||||
"7J1 Header Pin15";
|
||||
"7J1 Header Pin7", "";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vddio_ao18>;
|
||||
};
|
||||
|
||||
/* SD card */
|
||||
@ -221,7 +238,7 @@
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>;
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
|
||||
@ -229,7 +229,7 @@
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>;
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
|
||||
@ -135,7 +135,7 @@
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>;
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
|
||||
@ -49,6 +49,14 @@
|
||||
|
||||
/ {
|
||||
compatible = "amlogic,meson-gxl";
|
||||
|
||||
reserved-memory {
|
||||
/* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
|
||||
secmon_reserved_alt: secmon@5000000 {
|
||||
reg = <0x0 0x05000000 0x0 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ðmac {
|
||||
@ -268,15 +276,21 @@
|
||||
reg-names = "mux", "pull", "pull-enable", "gpio";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-ranges = <&pinctrl_periphs 0 10 101>;
|
||||
gpio-ranges = <&pinctrl_periphs 0 0 100>;
|
||||
};
|
||||
|
||||
emmc_pins: emmc {
|
||||
mux {
|
||||
groups = "emmc_nand_d07",
|
||||
"emmc_cmd",
|
||||
"emmc_clk",
|
||||
"emmc_ds";
|
||||
"emmc_clk";
|
||||
function = "emmc";
|
||||
};
|
||||
};
|
||||
|
||||
emmc_ds_pins: emmc-ds {
|
||||
mux {
|
||||
groups = "emmc_ds";
|
||||
function = "emmc";
|
||||
};
|
||||
};
|
||||
|
||||
400
arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
Normal file
400
arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
Normal file
@ -0,0 +1,400 @@
|
||||
/*
|
||||
* Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
|
||||
* Copyright (c) 2017 BayLibre, SAS
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
*
|
||||
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/thermal/thermal.h>
|
||||
|
||||
#include "meson-gxm.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "khadas,vim2", "amlogic,s912", "amlogic,meson-gxm";
|
||||
model = "Khadas VIM2";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart_AO;
|
||||
serial1 = &uart_A;
|
||||
serial2 = &uart_AO_B;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x80000000>;
|
||||
};
|
||||
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 0>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1710000>;
|
||||
|
||||
button-function {
|
||||
label = "Function";
|
||||
linux,code = <KEY_FN>;
|
||||
press-threshold-microvolt = <10000>;
|
||||
};
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
gpio_fan: gpio-fan {
|
||||
compatible = "gpio-fan";
|
||||
gpios = <&gpio GPIODV_14 GPIO_ACTIVE_HIGH
|
||||
&gpio GPIODV_15 GPIO_ACTIVE_HIGH>;
|
||||
/* Dummy RPM values since fan is optional */
|
||||
gpio-fan,speed-map = <0 0
|
||||
1 1
|
||||
2 2
|
||||
3 3>;
|
||||
cooling-min-level = <0>;
|
||||
cooling-max-level = <3>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button@0 {
|
||||
label = "power";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-connector {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_tmds_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pwmleds {
|
||||
compatible = "pwm-leds";
|
||||
|
||||
power {
|
||||
label = "vim:red:power";
|
||||
pwms = <&pwm_AO_ab 1 7812500 0>;
|
||||
max-brightness = <255>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
|
||||
clocks = <&wifi32k>;
|
||||
clock-names = "ext_clock";
|
||||
};
|
||||
|
||||
thermal-zones {
|
||||
cpu-thermal {
|
||||
polling-delay-passive = <250>; /* milliseconds */
|
||||
polling-delay = <1000>; /* milliseconds */
|
||||
|
||||
thermal-sensors = <&scpi_sensors 0>;
|
||||
|
||||
trips {
|
||||
cpu_alert0: cpu-alert0 {
|
||||
temperature = <70000>; /* millicelsius */
|
||||
hysteresis = <2000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
|
||||
cpu_alert1: cpu-alert1 {
|
||||
temperature = <80000>; /* millicelsius */
|
||||
hysteresis = <2000>; /* millicelsius */
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
map0 {
|
||||
trip = <&cpu_alert0>;
|
||||
cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>;
|
||||
};
|
||||
|
||||
map1 {
|
||||
trip = <&cpu_alert1>;
|
||||
cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>;
|
||||
};
|
||||
|
||||
map2 {
|
||||
trip = <&cpu_alert1>;
|
||||
cooling-device =
|
||||
<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
};
|
||||
|
||||
map3 {
|
||||
trip = <&cpu_alert1>;
|
||||
cooling-device =
|
||||
<&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: regulator-vcc_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vddio_ao18: regulator-vddio_ao18 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_AO18";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vddio_boot: regulator-vddio_boot {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_BOOT";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vddao_3v3: regulator-vddao_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
wifi32k: wifi32k {
|
||||
compatible = "pwm-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
|
||||
};
|
||||
};
|
||||
|
||||
&cec_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&ao_cec_pins>;
|
||||
pinctrl-names = "default";
|
||||
hdmi-phandle = <&hdmi_tx>;
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cooling-min-level = <0>;
|
||||
cooling-max-level = <6>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
&cpu4 {
|
||||
cooling-min-level = <0>;
|
||||
cooling-max-level = <4>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
ðmac {
|
||||
pinctrl-0 = <ð_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
/* Select external PHY by default */
|
||||
phy-handle = <&external_phy>;
|
||||
|
||||
amlogic,tx-delay-ns = <2>;
|
||||
|
||||
/* External PHY reset is shared with internal PHY Led signals */
|
||||
snps,reset-gpio = <&gpio GPIOZ_14 0>;
|
||||
snps,reset-delays-us = <0 10000 1000000>;
|
||||
snps,reset-active-low;
|
||||
|
||||
/* External PHY is in RGMII */
|
||||
phy-mode = "rgmii";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&external_mdio {
|
||||
external_phy: ethernet-phy@0 {
|
||||
/* Realtek RTL8211F (0x001cc916) */
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_tx {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&hdmi_tx_tmds_port {
|
||||
hdmi_tx_tmds_out: endpoint {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c_A {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&i2c_B {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c_b_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
rtc: rtc@51 {
|
||||
/* has to be enabled manually when a battery is connected: */
|
||||
status = "disabled";
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
clock-output-names = "xin32k";
|
||||
};
|
||||
};
|
||||
|
||||
&ir {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&remote_input_ao_pins>;
|
||||
pinctrl-names = "default";
|
||||
linux,rc-map-name = "rc-geekbox";
|
||||
};
|
||||
|
||||
&pwm_AO_ab {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&clkc CLKID_FCLK_DIV4>;
|
||||
clock-names = "clkin0";
|
||||
};
|
||||
|
||||
&pwm_ef {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&clkc CLKID_FCLK_DIV4>;
|
||||
clock-names = "clkin0";
|
||||
};
|
||||
|
||||
&sd_emmc_a {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdio_pins>;
|
||||
pinctrl-names = "default";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
bus-width = <4>;
|
||||
max-frequency = <100000000>;
|
||||
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddio_boot>;
|
||||
|
||||
brcmf: wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
};
|
||||
};
|
||||
|
||||
/* SD card */
|
||||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdcard_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
|
||||
cd-inverted;
|
||||
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddio_boot>;
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
bus-width = <8>;
|
||||
cap-sd-highspeed;
|
||||
cap-mmc-highspeed;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
disable-wp;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
mmc-hs400-1_8v;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vddio_boot>;
|
||||
};
|
||||
|
||||
/*
|
||||
* EMMC_DS pin is shared between SPI NOR CS and eMMC Data Strobe
|
||||
* Remove emmc_ds_pins from sd_emmc_c pinctrl-0 then spifc can be enabled
|
||||
*/
|
||||
&spifc {
|
||||
status = "disabled";
|
||||
pinctrl-0 = <&nor_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
w25q32: spi-flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "winbond,w25q16", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
/* This one is connected to the Bluetooth module */
|
||||
&uart_A {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */
|
||||
&uart_AO_B {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_b_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vddio_ao18>;
|
||||
};
|
||||
@ -193,7 +193,7 @@
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>;
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
|
||||
@ -216,7 +216,7 @@
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>;
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
bus-width = <8>;
|
||||
|
||||
38
arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts
Normal file
38
arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts
Normal file
@ -0,0 +1,38 @@
|
||||
/*
|
||||
* Copyright (c) 2017 BayLibre, SAS.
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
* Copyright (c) 2017 Oleg <balbes-150@yandex.ru>
|
||||
*
|
||||
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-gxm.dtsi"
|
||||
#include "meson-gx-p23x-q20x.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "tronsmart,vega-s96", "amlogic,s912", "amlogic,meson-gxm";
|
||||
model = "Tronsmart Vega S96";
|
||||
|
||||
};
|
||||
|
||||
ðmac {
|
||||
pinctrl-0 = <ð_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
/* Select external PHY by default */
|
||||
phy-handle = <&external_phy>;
|
||||
|
||||
amlogic,tx-delay-ns = <2>;
|
||||
|
||||
/* External PHY is in RGMII */
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
&external_mdio {
|
||||
external_phy: ethernet-phy@0 {
|
||||
/* Realtek RTL8211F (0x001cc916) */
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user