Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-24 21:21:41 +00:00
Code Issues Packages Projects Releases Wiki Activity

spi: Add new driver for STMicroelectronics' SPI Controller

Browse Source 
This patch adds support for the SPI portion of ST's SSC device.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Lee Jones 2014-12-09 20:21:30 +00:00 committed by Mark Brown
parent 97bf6af1f9
commit 9e862375c5
3 changed files with 518 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
drivers/spi/Kconfig
View File

@ -503,6 +503,13 @@ config SPI_SIRF
help
SPI driver for CSR SiRFprimaII SoCs
config SPI_ST_SSC4
tristate "STMicroelectronics SPI SSC-based driver"
depends on ARCH_STI
help
STMicroelectronics SoCs support for SPI. If you say yes to
this option, support will be included for the SSC driven SPI.
config SPI_SUN4I
tristate "Allwinner A10 SoCs SPI controller"
depends on ARCH_SUNXI || COMPILE_TEST

1
drivers/spi/Makefile
View File

@ -76,6 +76,7 @@ obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hspi.o
obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o
obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o
obj-$(CONFIG_SPI_SIRF) += spi-sirf.o
obj-$(CONFIG_SPI_ST_SSC4) += spi-st-ssc4.o
obj-$(CONFIG_SPI_SUN4I) += spi-sun4i.o
obj-$(CONFIG_SPI_SUN6I) += spi-sun6i.o
obj-$(CONFIG_SPI_TEGRA114) += spi-tegra114.o

510
drivers/spi/spi-st-ssc4.c Normal file
View File

@ -0,0 +1,510 @@
/*
* Copyright (c) 2008-2014 STMicroelectronics Limited
*
* Author: Angus Clark <Angus.Clark@st.com>
* Patrice Chotard <patrice.chotard@st.com>
* Lee Jones <lee.jones@linaro.org>
*
* SPI master mode controller driver, used in STMicroelectronics devices.
*
* May be copied or modified under the terms of the GNU General Public
* License Version 2.0 only. See linux/COPYING for more information.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/of_irq.h>
#include <linux/pm_runtime.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
/* SSC registers */
#define SSC_BRG 0x000
#define SSC_TBUF 0x004
#define SSC_RBUF 0x008
#define SSC_CTL 0x00C
#define SSC_IEN 0x010
#define SSC_I2C 0x018
/* SSC Control */
#define SSC_CTL_DATA_WIDTH_9 0x8
#define SSC_CTL_DATA_WIDTH_MSK 0xf
#define SSC_CTL_BM 0xf
#define SSC_CTL_HB BIT(4)
#define SSC_CTL_PH BIT(5)
#define SSC_CTL_PO BIT(6)
#define SSC_CTL_SR BIT(7)
#define SSC_CTL_MS BIT(8)
#define SSC_CTL_EN BIT(9)
#define SSC_CTL_LPB BIT(10)
#define SSC_CTL_EN_TX_FIFO BIT(11)
#define SSC_CTL_EN_RX_FIFO BIT(12)
#define SSC_CTL_EN_CLST_RX BIT(13)
/* SSC Interrupt Enable */
#define SSC_IEN_TEEN BIT(2)
#define FIFO_SIZE 8
struct spi_st {
/* SSC SPI Controller */
void __iomem *base;
struct clk *clk;
struct device *dev;
/* SSC SPI current transaction */
const u8 *tx_ptr;
u8 *rx_ptr;
u16 bytes_per_word;
unsigned int words_remaining;
unsigned int baud;
struct completion done;
};
static int spi_st_clk_enable(struct spi_st *spi_st)
{
/*
* Current platforms use one of the core clocks for SPI and I2C.
* If we attempt to disable the clock, the system will hang.
*
* TODO: Remove this when platform supports power domains.
*/
return 0;
return clk_prepare_enable(spi_st->clk);
}
static void spi_st_clk_disable(struct spi_st *spi_st)
{
/*
* Current platforms use one of the core clocks for SPI and I2C.
* If we attempt to disable the clock, the system will hang.
*
* TODO: Remove this when platform supports power domains.
*/
return;
clk_disable_unprepare(spi_st->clk);
}
/* Load the TX FIFO */
static void ssc_write_tx_fifo(struct spi_st *spi_st)
{
unsigned int count, i;
uint32_t word = 0;
if (spi_st->words_remaining > FIFO_SIZE)
count = FIFO_SIZE;
else
count = spi_st->words_remaining;
for (i = 0; i < count; i++) {
if (spi_st->tx_ptr) {
if (spi_st->bytes_per_word == 1) {
word = *spi_st->tx_ptr++;
} else {
word = *spi_st->tx_ptr++;
word = *spi_st->tx_ptr++ | (word << 8);
}
}
writel_relaxed(word, spi_st->base + SSC_TBUF);
}
}
/* Read the RX FIFO */
static void ssc_read_rx_fifo(struct spi_st *spi_st)
{
unsigned int count, i;
uint32_t word = 0;
if (spi_st->words_remaining > FIFO_SIZE)
count = FIFO_SIZE;
else
count = spi_st->words_remaining;
for (i = 0; i < count; i++) {
word = readl_relaxed(spi_st->base + SSC_RBUF);
if (spi_st->rx_ptr) {
if (spi_st->bytes_per_word == 1) {
*spi_st->rx_ptr++ = (uint8_t)word;
} else {
*spi_st->rx_ptr++ = (word >> 8);
*spi_st->rx_ptr++ = word & 0xff;
}
}
}
spi_st->words_remaining -= count;
}
static int spi_st_transfer_one(struct spi_master *master,
struct spi_device *spi, struct spi_transfer *t)
{
struct spi_st *spi_st = spi_master_get_devdata(master);
uint32_t ctl = 0;
/* Setup transfer */
spi_st->tx_ptr = t->tx_buf;
spi_st->rx_ptr = t->rx_buf;
if (spi->bits_per_word > 8) {
/*
* Anything greater than 8 bits-per-word requires 2
* bytes-per-word in the RX/TX buffers
*/
spi_st->bytes_per_word = 2;
spi_st->words_remaining = t->len / 2;
} else if (spi->bits_per_word == 8 && !(t->len & 0x1)) {
/*
* If transfer is even-length, and 8 bits-per-word, then
* implement as half-length 16 bits-per-word transfer
*/
spi_st->bytes_per_word = 2;
spi_st->words_remaining = t->len / 2;
/* Set SSC_CTL to 16 bits-per-word */
ctl = readl_relaxed(spi_st->base + SSC_CTL);
writel_relaxed((ctl | 0xf), spi_st->base + SSC_CTL);
readl_relaxed(spi_st->base + SSC_RBUF);
} else {
spi_st->bytes_per_word = 1;
spi_st->words_remaining = t->len;
}
reinit_completion(&spi_st->done);
/* Start transfer by writing to the TX FIFO */
ssc_write_tx_fifo(spi_st);
writel_relaxed(SSC_IEN_TEEN, spi_st->base + SSC_IEN);
/* Wait for transfer to complete */
wait_for_completion(&spi_st->done);
/* Restore SSC_CTL if necessary */
if (ctl)
writel_relaxed(ctl, spi_st->base + SSC_CTL);
spi_finalize_current_transfer(spi->master);
return t->len;
}
static void spi_st_cleanup(struct spi_device *spi)
{
int cs = spi->cs_gpio;
if (gpio_is_valid(cs))
devm_gpio_free(&spi->dev, cs);
}
/* the spi->mode bits understood by this driver: */
#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_LOOP | SPI_CS_HIGH)
static int spi_st_setup(struct spi_device *spi)
{
struct spi_st *spi_st = spi_master_get_devdata(spi->master);
u32 spi_st_clk, sscbrg, var;
u32 hz = spi->max_speed_hz;
int cs = spi->cs_gpio;
int ret;
if (spi->mode & ~MODEBITS) {
dev_err(&spi->dev, "unsupported mode bits 0x%x\n",
spi->mode & ~MODEBITS);
return -EINVAL;
}
if (!hz) {
dev_err(&spi->dev, "max_speed_hz unspecified\n");
return -EINVAL;
}
if (!gpio_is_valid(cs)) {
dev_err(&spi->dev, "%d is not a valid gpio\n", cs);
return -EINVAL;
}
if (devm_gpio_request(&spi->dev, cs, dev_name(&spi->dev))) {
dev_err(&spi->dev, "could not request gpio:%d\n", cs);
return -EINVAL;
}
ret = gpio_direction_output(cs, spi->mode & SPI_CS_HIGH);
if (ret)
return ret;
spi_st_clk = clk_get_rate(spi_st->clk);
/* Set SSC_BRF */
sscbrg = spi_st_clk / (2 * hz);
if (sscbrg < 0x07 || sscbrg > BIT(16)) {
dev_err(&spi->dev,
"baudrate %d outside valid range %d\n", sscbrg, hz);
return -EINVAL;
}
spi_st->baud = spi_st_clk / (2 * sscbrg);
if (sscbrg == BIT(16)) /* 16-bit counter wraps */
sscbrg = 0x0;
writel_relaxed(sscbrg, spi_st->base + SSC_BRG);
dev_dbg(&spi->dev,
"setting baudrate:target= %u hz, actual= %u hz, sscbrg= %u\n",
hz, spi_st->baud, sscbrg);
/* Set SSC_CTL and enable SSC */
var = readl_relaxed(spi_st->base + SSC_CTL);
var |= SSC_CTL_MS;
if (spi->mode & SPI_CPOL)
var |= SSC_CTL_PO;
else
var &= ~SSC_CTL_PO;
if (spi->mode & SPI_CPHA)
var |= SSC_CTL_PH;
else
var &= ~SSC_CTL_PH;
if ((spi->mode & SPI_LSB_FIRST) == 0)
var |= SSC_CTL_HB;
else
var &= ~SSC_CTL_HB;
if (spi->mode & SPI_LOOP)
var |= SSC_CTL_LPB;
else
var &= ~SSC_CTL_LPB;
var &= ~SSC_CTL_DATA_WIDTH_MSK;
var |= (spi->bits_per_word - 1);
var |= SSC_CTL_EN_TX_FIFO | SSC_CTL_EN_RX_FIFO;
var |= SSC_CTL_EN;
writel_relaxed(var, spi_st->base + SSC_CTL);
/* Clear the status register */
readl_relaxed(spi_st->base + SSC_RBUF);
return 0;
}
/* Interrupt fired when TX shift register becomes empty */
static irqreturn_t spi_st_irq(int irq, void *dev_id)
{
struct spi_st *spi_st = (struct spi_st *)dev_id;
/* Read RX FIFO */
ssc_read_rx_fifo(spi_st);
/* Fill TX FIFO */
if (spi_st->words_remaining) {
ssc_write_tx_fifo(spi_st);
} else {
/* TX/RX complete */
writel_relaxed(0x0, spi_st->base + SSC_IEN);
/*
* read SSC_IEN to ensure that this bit is set
* before re-enabling interrupt
*/
readl(spi_st->base + SSC_IEN);
complete(&spi_st->done);
}
return IRQ_HANDLED;
}
static int spi_st_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct spi_master *master;
struct resource *res;
struct spi_st *spi_st;
int irq, ret = 0;
u32 var;
master = spi_alloc_master(&pdev->dev, sizeof(*spi_st));
if (!master)
return -ENOMEM;
master->dev.of_node = np;
master->mode_bits = MODEBITS;
master->setup = spi_st_setup;
master->cleanup = spi_st_cleanup;
master->transfer_one = spi_st_transfer_one;
master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
master->auto_runtime_pm = true;
master->bus_num = pdev->id;
spi_st = spi_master_get_devdata(master);
spi_st->clk = devm_clk_get(&pdev->dev, "ssc");
if (IS_ERR(spi_st->clk)) {
dev_err(&pdev->dev, "Unable to request clock\n");
return PTR_ERR(spi_st->clk);
}
ret = spi_st_clk_enable(spi_st);
if (ret)
return ret;
init_completion(&spi_st->done);
/* Get resources */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
spi_st->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(spi_st->base)) {
ret = PTR_ERR(spi_st->base);
goto clk_disable;
}
/* Disable I2C and Reset SSC */
writel_relaxed(0x0, spi_st->base + SSC_I2C);
var = readw_relaxed(spi_st->base + SSC_CTL);
var |= SSC_CTL_SR;
writel_relaxed(var, spi_st->base + SSC_CTL);
udelay(1);
var = readl_relaxed(spi_st->base + SSC_CTL);
var &= ~SSC_CTL_SR;
writel_relaxed(var, spi_st->base + SSC_CTL);
/* Set SSC into slave mode before reconfiguring PIO pins */
var = readl_relaxed(spi_st->base + SSC_CTL);
var &= ~SSC_CTL_MS;
writel_relaxed(var, spi_st->base + SSC_CTL);
irq = irq_of_parse_and_map(np, 0);
if (!irq) {
dev_err(&pdev->dev, "IRQ missing or invalid\n");
ret = -EINVAL;
goto clk_disable;
}
ret = devm_request_irq(&pdev->dev, irq, spi_st_irq, 0,
pdev->name, spi_st);
if (ret) {
dev_err(&pdev->dev, "Failed to request irq %d\n", irq);
goto clk_disable;
}
/* by default the device is on */
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
platform_set_drvdata(pdev, master);
ret = devm_spi_register_master(&pdev->dev, master);
if (ret) {
dev_err(&pdev->dev, "Failed to register master\n");
goto clk_disable;
}
return 0;
clk_disable:
spi_st_clk_disable(spi_st);
return ret;
}
static int spi_st_remove(struct platform_device *pdev)
{
struct spi_master *master = platform_get_drvdata(pdev);
struct spi_st *spi_st = spi_master_get_devdata(master);
spi_st_clk_disable(spi_st);
pinctrl_pm_select_sleep_state(&pdev->dev);
return 0;
}
#ifdef CONFIG_PM
static int spi_st_runtime_suspend(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
struct spi_st *spi_st = spi_master_get_devdata(master);
writel_relaxed(0, spi_st->base + SSC_IEN);
pinctrl_pm_select_sleep_state(dev);
spi_st_clk_disable(spi_st);
return 0;
}
static int spi_st_runtime_resume(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
struct spi_st *spi_st = spi_master_get_devdata(master);
int ret;
ret = spi_st_clk_enable(spi_st);
pinctrl_pm_select_default_state(dev);
return ret;
}
#endif
#ifdef CONFIG_PM_SLEEP
static int spi_st_suspend(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
int ret;
ret = spi_master_suspend(master);
if (ret)
return ret;
return pm_runtime_force_suspend(dev);
}
static int spi_st_resume(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
int ret;
ret = spi_master_resume(master);
if (ret)
return ret;
return pm_runtime_force_resume(dev);
}
#endif
static const struct dev_pm_ops spi_st_pm = {
SET_SYSTEM_SLEEP_PM_OPS(spi_st_suspend, spi_st_resume)
SET_RUNTIME_PM_OPS(spi_st_runtime_suspend, spi_st_runtime_resume, NULL)
};
static struct of_device_id stm_spi_match[] = {
{ .compatible = "st,comms-ssc4-spi", },
{},
};
MODULE_DEVICE_TABLE(of, stm_spi_match);
static struct platform_driver spi_st_driver = {
.driver = {
.name = "spi-st",
.pm = &spi_st_pm,
.of_match_table = of_match_ptr(stm_spi_match),
},
.probe = spi_st_probe,
.remove = spi_st_remove,
};
module_platform_driver(spi_st_driver);
MODULE_AUTHOR("Patrice Chotard <patrice.chotard@st.com>");
MODULE_DESCRIPTION("STM SSC SPI driver");
MODULE_LICENSE("GPL v2");