Staging: batman-adv: Update the README for mainline usage.

The module now only compiles inside mainline, so remove the comments
about different versions of the kernel it can be used with. Also
update comments about building with debug enabled and how to use the
VIS data now that it no longer natively outputs dot or JSON.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Andrew Lunn 2010-01-06 07:30:48 +01:00 committed by Greg Kroah-Hartman
parent 182374a0bd
commit 9d4682d070

View File

@ -1,4 +1,4 @@
[state: 13-12-2009]
[state: 06-01-2010]
BATMAN-ADV
----------
@ -15,19 +15,6 @@ above B.A.T.M.A.N. Advanced, prominent examples are: IPv4, IPv6, DHCP, IPX.
This is batman-advanced implemented as Linux kernel driver. It does not depend
on any network (other) driver, and can be used on wifi as well as ethernet,
vpn, etc ... (anything with ethernet-style layer 2).
It compiles against and should work with Linux 2.6.20 - 2.6.32. Supporting older
versions is not planned, but it's probably easy to backport it. If you work on a
backport, feel free to contact us. :-)
COMPILE
-------
To compile against your currently installed kernel, just type:
# make
if you want to compile against some other kernel, use:
# make KERNELPATH=/path/to/kernel
USAGE
-----
@ -73,16 +60,9 @@ When configured as server, you can get a topology snapshot of your mesh:
# cat /proc/net/batman-adv/vis
This output format is a graphviz formatted text file which can be
processed with graphviz-tools like dot.
The labels are similar/compatible to the ETX metric, 1.0 means perfect
connection (100%), 2.0 means 50%, 3.0 means 33% and so on.
Alternatively, a JSON output format is available. The format can be set
using by writing either "dot_draw" or "json" into the vis_format file.
"dot_draw" is selected by default.
echo "json" > /proc/net/batman-adv/vis_format
The output is in a generic raw format. Use the batctl tool (See below)
to convert this to other formats more suitable for graphing, eg
graphviz dot, or JSON data-interchange format.
In very mobile scenarios, you might want to adjust the originator
interval to a lower value. This will make the mesh more responsive to
@ -110,15 +90,11 @@ dmesg | grep batman-adv
When investigating problems with your mesh network it is sometimes
necessary to see more detail debug messages. This must be enabled when
compiling the batman-adv module. When building batman-adv as part of
kernel, use "make menuconfig" and enable the option
"B.A.T.M.A.N. debugging". When compiling outside of the kernel tree it
is necessary to edit the file Makefile.kbuild and uncomment the line
#EXTRA_CFLAGS += -DCONFIG_BATMAN_ADV_DEBUG
compiling the batman-adv module. Use "make menuconfig" and enable the
option "B.A.T.M.A.N. debugging".
The additional debug output is by default disabled. It can be enabled
either at kernel modules load time or during run time. To enable debug
either at kernel module load time or during run time. To enable debug
output at module load time, add the module parameter debug=<value>.
<value> can take one of four values.
@ -147,12 +123,12 @@ to see the debug messages.
BATCTL
------
B.A.T.M.A.N. advanced operates on layer 2 and thus all hosts partici-
pating in the virtual switch are completely transparent for all proto-
cols above layer 2. Therefore the common diagnosis tools do not work as
expected. To overcome these problems batctl was created. At the moment
the batctl contains ping, traceroute, tcpdump and interfaces to the
kernel module settings.
B.A.T.M.A.N. advanced operates on layer 2 and thus all hosts
participating in the virtual switch are completely transparent for all
protocols above layer 2. Therefore the common diagnosis tools do not
work as expected. To overcome these problems batctl was created. At
the moment the batctl contains ping, traceroute, tcpdump and
interfaces to the kernel module settings.
For more information, please see the manpage (man batctl).