From 9b163e0d330debbf7dcc14b2c3e2dc19a3b50a1d Mon Sep 17 00:00:00 2001 From: David Lechner Date: Mon, 25 Mar 2024 14:22:53 -0500 Subject: [PATCH] spi: remove struct spi_message::is_dma_mapped There are no more users of the deprecated is_dma_mapped in struct spi_message so it can be removed. References in documentation and comments are also removed. A few similar checks if xfer->tx_dma or xfer->rx_dma are not NULL are also removed since these are now guaranteed to be NULL because they were previously set only if is_dma_mapped was true. Signed-off-by: David Lechner Link: https://msgid.link/r/20240325-spi-remove-is_dma_mapped-v2-1-d08d62b61f1c@baylibre.com Signed-off-by: Mark Brown --- Documentation/spi/pxa2xx.rst | 3 --- Documentation/spi/spi-summary.rst | 4 ---- drivers/spi/spi-atmel.c | 8 ++------ drivers/spi/spi-pxa2xx.c | 11 ----------- drivers/spi/spi.c | 7 ------- include/linux/spi/spi.h | 11 +++-------- 6 files changed, 5 insertions(+), 39 deletions(-) diff --git a/Documentation/spi/pxa2xx.rst b/Documentation/spi/pxa2xx.rst index 19479b801826..43e0b758803a 100644 --- a/Documentation/spi/pxa2xx.rst +++ b/Documentation/spi/pxa2xx.rst @@ -194,9 +194,6 @@ The following logic is used to determine the type of I/O to be used on a per "spi_transfer" basis:: if spi_message.len > 65536 then - if spi_message.is_dma_mapped or rx_dma_buf != 0 or tx_dma_buf != 0 then - reject premapped transfers - print "rate limited" warning use PIO transfers diff --git a/Documentation/spi/spi-summary.rst b/Documentation/spi/spi-summary.rst index 546de37d6caf..f7f8b1573f25 100644 --- a/Documentation/spi/spi-summary.rst +++ b/Documentation/spi/spi-summary.rst @@ -419,10 +419,6 @@ any more such messages. to make extra copies unless the hardware requires it (e.g. working around hardware errata that force the use of bounce buffering). - If standard dma_map_single() handling of these buffers is inappropriate, - you can use spi_message.is_dma_mapped to tell the controller driver - that you've already provided the relevant DMA addresses. - - The basic I/O primitive is spi_async(). Async requests may be issued in any context (irq handler, task, etc) and completion is reported using a callback provided with the message. diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index bad34998454a..b62f57390d8f 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -987,8 +987,6 @@ static void atmel_spi_pdc_next_xfer(struct spi_controller *host, * For DMA, tx_buf/tx_dma have the same relationship as rx_buf/rx_dma: * - The buffer is either valid for CPU access, else NULL * - If the buffer is valid, so is its DMA address - * - * This driver manages the dma address unless message->is_dma_mapped. */ static int atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer) @@ -1374,8 +1372,7 @@ static int atmel_spi_one_transfer(struct spi_controller *host, * DMA map early, for performance (empties dcache ASAP) and * better fault reporting. */ - if ((!host->cur_msg->is_dma_mapped) - && as->use_pdc) { + if (as->use_pdc) { if (atmel_spi_dma_map_xfer(as, xfer) < 0) return -ENOMEM; } @@ -1454,8 +1451,7 @@ static int atmel_spi_one_transfer(struct spi_controller *host, } } - if (!host->cur_msg->is_dma_mapped - && as->use_pdc) + if (as->use_pdc) atmel_spi_dma_unmap_xfer(host, xfer); if (as->use_pdc) diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index f2a856f6a99e..6c2a14418972 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -944,7 +944,6 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller, struct spi_transfer *transfer) { struct driver_data *drv_data = spi_controller_get_devdata(controller); - struct spi_message *message = controller->cur_msg; struct chip_data *chip = spi_get_ctldata(spi); u32 dma_thresh = chip->dma_threshold; u32 dma_burst = chip->dma_burst_size; @@ -959,16 +958,6 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller, /* Check if we can DMA this transfer */ if (transfer->len > MAX_DMA_LEN && chip->enable_dma) { - - /* Reject already-mapped transfers; PIO won't always work */ - if (message->is_dma_mapped - || transfer->rx_dma || transfer->tx_dma) { - dev_err(&spi->dev, - "Mapped transfer length of %u is greater than %d\n", - transfer->len, MAX_DMA_LEN); - return -EINVAL; - } - /* Warn ... we force this to PIO mode */ dev_warn_ratelimited(&spi->dev, "DMA disabled for transfer length %u greater than %d\n", diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index ff75838c1b5d..a2f01116ba09 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -3709,9 +3709,6 @@ static int __spi_split_transfer_maxsize(struct spi_controller *ctlr, * to the same values as *xferp, so tx_buf, rx_buf and len * are all identical (as well as most others) * so we just have to fix up len and the pointers. - * - * This also includes support for the depreciated - * spi_message.is_dma_mapped interface. */ /* @@ -3725,12 +3722,8 @@ static int __spi_split_transfer_maxsize(struct spi_controller *ctlr, /* Update rx_buf, tx_buf and DMA */ if (xfers[i].rx_buf) xfers[i].rx_buf += offset; - if (xfers[i].rx_dma) - xfers[i].rx_dma += offset; if (xfers[i].tx_buf) xfers[i].tx_buf += offset; - if (xfers[i].tx_dma) - xfers[i].tx_dma += offset; /* Update length */ xfers[i].len = min(maxsize, xfers[i].len - offset); diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index c459809efee4..b589e2547439 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -955,8 +955,8 @@ struct spi_res { * struct spi_transfer - a read/write buffer pair * @tx_buf: data to be written (DMA-safe memory), or NULL * @rx_buf: data to be read (DMA-safe memory), or NULL - * @tx_dma: DMA address of tx_buf, if @spi_message.is_dma_mapped - * @rx_dma: DMA address of rx_buf, if @spi_message.is_dma_mapped + * @tx_dma: DMA address of tx_buf, currently not for client use + * @rx_dma: DMA address of rx_buf, currently not for client use * @tx_nbits: number of bits used for writing. If 0 the default * (SPI_NBITS_SINGLE) is used. * @rx_nbits: number of bits used for reading. If 0 the default @@ -1066,8 +1066,7 @@ struct spi_transfer { /* * It's okay if tx_buf == rx_buf (right?). * For MicroWire, one buffer must be NULL. - * Buffers must work with dma_*map_single() calls, unless - * spi_message.is_dma_mapped reports a pre-existing mapping. + * Buffers must work with dma_*map_single() calls. */ const void *tx_buf; void *rx_buf; @@ -1111,8 +1110,6 @@ struct spi_transfer { * struct spi_message - one multi-segment SPI transaction * @transfers: list of transfer segments in this transaction * @spi: SPI device to which the transaction is queued - * @is_dma_mapped: if true, the caller provided both DMA and CPU virtual - * addresses for each transfer buffer * @pre_optimized: peripheral driver pre-optimized the message * @optimized: the message is in the optimized state * @prepared: spi_prepare_message was called for the this message @@ -1146,8 +1143,6 @@ struct spi_message { struct spi_device *spi; - unsigned is_dma_mapped:1; - /* spi_optimize_message() was called for this message */ bool pre_optimized; /* __spi_optimize_message() was called for this message */