[SCSI] mptfusion: Fix for device offline while doing aggressive HBA reset

[Resend patch as per Bernd Schubert comment ]

Issue:

Device goes offline while doing aggressive HBA reset
along with IO using some utility.

Root cause:

FW goes into bad state due to aggressive reset. Softreset does not
help to recover FW. And also aggressive reset open up the window for
Error handling thread to kicked off at the same time HBA will be in
constant RESET loop as part of aggressive reset test case can lead
Device to goes offline.

Changes:

1. Added extra check as below inside eh_timed_out call back as below.
   if(ioc->ioc_reset_in_progress) Rc = EH_TIMER_RESET

2. Removed " DOORBELL_ACTIVE" check for SAS controller from task
   management context.  Since SAS controller uses high priority queue
   for task management. This check is not required for SAS controller.

3. Moved SoftReset call to HardReset from Task Mgmt context.

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/message/fusion/mptbase.c

@@ -6474,8 +6474,19 @@ mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
 			pReq->Action, ioc->mptbase_cmds.status, timeleft));
 		if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
 			goto out;
-		if (!timeleft)
+		if (!timeleft) {
+			spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+			if (ioc->ioc_reset_in_progress) {
+				spin_unlock_irqrestore(&ioc->taskmgmt_lock,
+					flags);
+				printk(MYIOC_s_INFO_FMT "%s: host reset in"
+					" progress mpt_config timed out.!!\n",
+					__func__, ioc->name);
+				return -EFAULT;
+			}
+			spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 			issue_hard_reset = 1;
+		}
 		goto out;
 	}
 
@@ -7189,7 +7200,18 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
 	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
 	if (ioc->ioc_reset_in_progress) {
 		spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
-		return 0;
+		ioc->wait_on_reset_completion = 1;
+		do {
+			ssleep(1);
+		} while (ioc->ioc_reset_in_progress == 1);
+		ioc->wait_on_reset_completion = 0;
+		return ioc->reset_status;
+	}
+	if (ioc->wait_on_reset_completion) {
+		spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+		rc = 0;
+		time_count = jiffies;
+		goto exit;
 	}
 	ioc->ioc_reset_in_progress = 1;
 	if (ioc->alt_ioc)
@@ -7226,6 +7248,7 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
 	ioc->ioc_reset_in_progress = 0;
 	ioc->taskmgmt_quiesce_io = 0;
 	ioc->taskmgmt_in_progress = 0;
+	ioc->reset_status = rc;
 	if (ioc->alt_ioc) {
 		ioc->alt_ioc->ioc_reset_in_progress = 0;
 		ioc->alt_ioc->taskmgmt_quiesce_io = 0;
@@ -7241,7 +7264,7 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
 					ioc->alt_ioc, MPT_IOC_POST_RESET);
 		}
 	}
-
+exit:
 	dtmprintk(ioc,
 	    printk(MYIOC_s_DEBUG_FMT
 		"HardResetHandler: completed (%d seconds): %s\n", ioc->name,

drivers/message/fusion/mptbase.h

@@ -753,6 +753,8 @@ typedef struct _MPT_ADAPTER
 	int			 taskmgmt_in_progress;
 	u8			 taskmgmt_quiesce_io;
 	u8			 ioc_reset_in_progress;
+	u8			 reset_status;
+	u8			 wait_on_reset_completion;
 	MPT_SCHEDULE_TARGET_RESET schedule_target_reset;
 	MPT_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds;
 	struct work_struct	 sas_persist_task;

drivers/message/fusion/mptsas.c

@@ -1950,6 +1950,15 @@ static enum blk_eh_timer_return mptsas_eh_timed_out(struct scsi_cmnd *sc)
 		goto done;
 	}
 
+	/* In case if IOC is in reset from internal context.
+	*  Do not execute EEH for the same IOC. SML should to reset timer.
+	*/
+	if (ioc->ioc_reset_in_progress) {
+		dtmprintk(ioc, printk(MYIOC_s_WARN_FMT ": %s: ioc is in reset,"
+		    "SML need to reset the timer (sc=%p)\n",
+		    ioc->name, __func__, sc));
+		rc = BLK_EH_RESET_TIMER;
+	}
 	vdevice = sc->device->hostdata;
 	if (vdevice && vdevice->vtarget && (vdevice->vtarget->inDMD
 		|| vdevice->vtarget->deleted)) {

drivers/message/fusion/mptscsih.c

@@ -1630,7 +1630,13 @@ mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun,
 		return 0;
 	}
 
-	if (ioc_raw_state & MPI_DOORBELL_ACTIVE) {
+	/* DOORBELL ACTIVE check is not required if
+	*  MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q is supported.
+	*/
+
+	if (!((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q)
+		 && (ioc->facts.MsgVersion >= MPI_VERSION_01_05)) &&
+		(ioc_raw_state & MPI_DOORBELL_ACTIVE)) {
 		printk(MYIOC_s_WARN_FMT
 			"TaskMgmt type=%x: ioc_state: "
 			"DOORBELL_ACTIVE (0x%x)!\n",
@@ -1729,7 +1735,9 @@ mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun,
 		printk(MYIOC_s_WARN_FMT
 		       "Issuing Reset from %s!! doorbell=0x%08x\n",
 		       ioc->name, __func__, mpt_GetIocState(ioc, 0));
-		retval = mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
+		retval = (ioc->bus_type == SAS) ?
+			mpt_HardResetHandler(ioc, CAN_SLEEP) :
+			mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
 		mpt_free_msg_frame(ioc, mf);
 	}