microblaze: remove redundant early_printk support

With earlycon support now enabled, the arch specific early_printk support
can be removed.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
This commit is contained in:
Rob Herring 2018-03-27 21:06:59 -05:00 committed by Michal Simek
parent f71044c999
commit 96f0e6fcc9
8 changed files with 4 additions and 355 deletions

View File

@ -8,14 +8,6 @@ config TRACE_IRQFLAGS_SUPPORT
source "lib/Kconfig.debug"
config EARLY_PRINTK
bool "Early printk function for kernel"
depends on SERIAL_UARTLITE_CONSOLE || SERIAL_8250_CONSOLE
default n
help
This option turns on/off early printk messages to console.
First Uartlite node is taken.
config HEART_BEAT
bool "Heart beat function for kernel"
default n

View File

@ -1,27 +0,0 @@
/*
* Definitions for talking to the Open Firmware PROM on
* Power Macintosh computers.
*
* Copyright (C) 1996-2005 Paul Mackerras.
*
* Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _ASM_MICROBLAZE_PROM_H
#define _ASM_MICROBLAZE_PROM_H
#include <linux/of.h>
/* Other Prototypes */
enum early_consoles {
UARTLITE = 1,
UART16550 = 2,
};
extern int of_early_console(void *version);
#endif /* _ASM_MICROBLAZE_PROM_H */

View File

@ -19,16 +19,11 @@ extern char cmd_line[COMMAND_LINE_SIZE];
extern char *klimit;
int setup_early_printk(char *opt);
void remap_early_printk(void);
void disable_early_printk(void);
void microblaze_heartbeat(void);
void microblaze_setup_heartbeat(void);
# ifdef CONFIG_MMU
extern void mmu_reset(void);
extern void early_console_reg_tlb_alloc(unsigned int addr);
# endif /* CONFIG_MMU */
extern void of_platform_reset_gpio_probe(void);

View File

@ -22,7 +22,6 @@ obj-y += dma.o exceptions.o \
obj-y += cpu/
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_HEART_BEAT) += heartbeat.o
obj-$(CONFIG_MODULES) += microblaze_ksyms.o module.o
obj-$(CONFIG_MMU) += misc.o

View File

@ -1,184 +0,0 @@
/*
* Early printk support for Microblaze.
*
* Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2007-2009 PetaLogix
* Copyright (C) 2003-2006 Yasushi SHOJI <yashi@atmark-techno.com>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/console.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/tty.h>
#include <linux/io.h>
#include <asm/processor.h>
#include <linux/fcntl.h>
#include <asm/setup.h>
#include <asm/prom.h>
static u32 base_addr;
#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
static void early_printk_uartlite_putc(char c)
{
/*
* Limit how many times we'll spin waiting for TX FIFO status.
* This will prevent lockups if the base address is incorrectly
* set, or any other issue on the UARTLITE.
* This limit is pretty arbitrary, unless we are at about 10 baud
* we'll never timeout on a working UART.
*/
unsigned retries = 1000000;
/* read status bit - 0x8 offset */
while (--retries && (in_be32(base_addr + 8) & (1 << 3)))
;
/* Only attempt the iowrite if we didn't timeout */
/* write to TX_FIFO - 0x4 offset */
if (retries)
out_be32(base_addr + 4, c & 0xff);
}
static void early_printk_uartlite_write(struct console *unused,
const char *s, unsigned n)
{
while (*s && n-- > 0) {
if (*s == '\n')
early_printk_uartlite_putc('\r');
early_printk_uartlite_putc(*s);
s++;
}
}
static struct console early_serial_uartlite_console = {
.name = "earlyser",
.write = early_printk_uartlite_write,
.flags = CON_PRINTBUFFER | CON_BOOT,
.index = -1,
};
#endif /* CONFIG_SERIAL_UARTLITE_CONSOLE */
#ifdef CONFIG_SERIAL_8250_CONSOLE
static void early_printk_uart16550_putc(char c)
{
/*
* Limit how many times we'll spin waiting for TX FIFO status.
* This will prevent lockups if the base address is incorrectly
* set, or any other issue on the UARTLITE.
* This limit is pretty arbitrary, unless we are at about 10 baud
* we'll never timeout on a working UART.
*/
#define UART_LSR_TEMT 0x40 /* Transmitter empty */
#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
unsigned retries = 10000;
while (--retries &&
!((in_be32(base_addr + 0x14) & BOTH_EMPTY) == BOTH_EMPTY))
;
if (retries)
out_be32(base_addr, c & 0xff);
}
static void early_printk_uart16550_write(struct console *unused,
const char *s, unsigned n)
{
while (*s && n-- > 0) {
if (*s == '\n')
early_printk_uart16550_putc('\r');
early_printk_uart16550_putc(*s);
s++;
}
}
static struct console early_serial_uart16550_console = {
.name = "earlyser",
.write = early_printk_uart16550_write,
.flags = CON_PRINTBUFFER | CON_BOOT,
.index = -1,
};
#endif /* CONFIG_SERIAL_8250_CONSOLE */
int __init setup_early_printk(char *opt)
{
int version = 0;
if (early_console)
return 1;
base_addr = of_early_console(&version);
if (base_addr) {
#ifdef CONFIG_MMU
early_console_reg_tlb_alloc(base_addr);
#endif
switch (version) {
#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
case UARTLITE:
pr_info("Early console on uartlite at 0x%08x\n",
base_addr);
early_console = &early_serial_uartlite_console;
break;
#endif
#ifdef CONFIG_SERIAL_8250_CONSOLE
case UART16550:
pr_info("Early console on uart16650 at 0x%08x\n",
base_addr);
early_console = &early_serial_uart16550_console;
break;
#endif
default:
pr_info("Unsupported early console %d\n",
version);
return 1;
}
register_console(early_console);
return 0;
}
return 1;
}
/* Remap early console to virtual address and do not allocate one TLB
* only for early console because of performance degression */
void __init remap_early_printk(void)
{
if (!early_console)
return;
pr_info("early_printk_console remapping from 0x%x to ", base_addr);
base_addr = (u32) ioremap(base_addr, PAGE_SIZE);
pr_cont("0x%x\n", base_addr);
#ifdef CONFIG_MMU
/*
* Early console is on the top of skipped TLB entries
* decrease tlb_skip size ensure that hardcoded TLB entry will be
* used by generic algorithm
* FIXME check if early console mapping is on the top by rereading
* TLB entry and compare baseaddr
* mts rtlbx, (tlb_skip - 1)
* nop
* mfs rX, rtlblo
* nop
* cmp rX, orig_base_addr
*/
tlb_skip -= 1;
#endif
}
void __init disable_early_printk(void)
{
if (!early_console)
return;
pr_warn("disabling early console\n");
unregister_console(early_console);
early_console = NULL;
}

View File

@ -63,38 +63,3 @@ _tlbie_1:
nop
.size _tlbie, . - _tlbie
/*
* Allocate TLB entry for early console
*/
.globl early_console_reg_tlb_alloc;
.type early_console_reg_tlb_alloc, @function
.align 4;
early_console_reg_tlb_alloc:
/*
* Load a TLB entry for the UART, so that microblaze_progress() can use
* the UARTs nice and early. We use a 4k real==virtual mapping.
*/
lwi r4, r0, tlb_skip
mts rtlbx, r4 /* TLB slot 63 */
or r4,r5,r0
andi r4,r4,0xfffff000
ori r4,r4,(TLB_WR|TLB_I|TLB_M|TLB_G)
andi r5,r5,0xfffff000
ori r5,r5,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
mts rtlblo,r4 /* Load the data portion of the entry */
nop
mts rtlbhi,r5 /* Load the tag portion of the entry */
nop
lwi r5, r0, tlb_skip
addik r5, r5, 1
swi r5, r0, tlb_skip
rtsd r15, 8
nop
.size early_console_reg_tlb_alloc, . - early_console_reg_tlb_alloc

View File

@ -13,91 +13,11 @@
* 2 of the License, or (at your option) any later version.
*/
#include <stdarg.h>
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/threads.h>
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/stringify.h>
#include <linux/delay.h>
#include <linux/initrd.h>
#include <linux/bitops.h>
#include <linux/kexec.h>
#include <linux/debugfs.h>
#include <linux/irq.h>
#include <linux/memblock.h>
#include <linux/of_fdt.h>
#include <asm/prom.h>
#include <asm/page.h>
#include <asm/processor.h>
#include <asm/irq.h>
#include <linux/io.h>
#include <asm/mmu.h>
#include <asm/pgtable.h>
#include <asm/sections.h>
#include <asm/pci-bridge.h>
#ifdef CONFIG_EARLY_PRINTK
static const char *stdout;
static int __init early_init_dt_scan_chosen_serial(unsigned long node,
const char *uname, int depth, void *data)
{
int l;
const char *p;
pr_debug("%s: depth: %d, uname: %s\n", __func__, depth, uname);
if (depth == 1 && (strcmp(uname, "chosen") == 0 ||
strcmp(uname, "chosen@0") == 0)) {
p = of_get_flat_dt_prop(node, "linux,stdout-path", &l);
if (p != NULL && l > 0)
stdout = p; /* store pointer to stdout-path */
}
if (stdout && strstr(stdout, uname)) {
p = of_get_flat_dt_prop(node, "compatible", &l);
pr_debug("Compatible string: %s\n", p);
if ((strncmp(p, "xlnx,xps-uart16550", 18) == 0) ||
(strncmp(p, "xlnx,axi-uart16550", 18) == 0)) {
unsigned int addr;
*(u32 *)data = UART16550;
addr = *(u32 *)of_get_flat_dt_prop(node, "reg", &l);
addr += *(u32 *)of_get_flat_dt_prop(node,
"reg-offset", &l);
/* clear register offset */
return be32_to_cpu(addr) & ~3;
}
if ((strncmp(p, "xlnx,xps-uartlite", 17) == 0) ||
(strncmp(p, "xlnx,opb-uartlite", 17) == 0) ||
(strncmp(p, "xlnx,axi-uartlite", 17) == 0) ||
(strncmp(p, "xlnx,mdm", 8) == 0)) {
const unsigned int *addrp;
*(u32 *)data = UARTLITE;
addrp = of_get_flat_dt_prop(node, "reg", &l);
return be32_to_cpup(addrp); /* return address */
}
}
return 0;
}
/* this function is looking for early console - Microblaze specific */
int __init of_early_console(void *version)
{
return of_scan_flat_dt(early_init_dt_scan_chosen_serial, version);
}
#endif
void __init early_init_devtree(void *params)
{
pr_debug(" -> early_init_devtree(%p)\n", params);
@ -106,8 +26,6 @@ void __init early_init_devtree(void *params)
if (!strlen(boot_command_line))
strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
parse_early_param();
memblock_allow_resize();
pr_debug("Phys. mem: %lx\n", (unsigned long) memblock_phys_mem_size());

View File

@ -27,13 +27,12 @@
#include <linux/param.h>
#include <linux/pci.h>
#include <linux/cache.h>
#include <linux/of_platform.h>
#include <linux/of.h>
#include <linux/dma-mapping.h>
#include <asm/cacheflush.h>
#include <asm/entry.h>
#include <asm/cpuinfo.h>
#include <asm/prom.h>
#include <asm/pgtable.h>
DEFINE_PER_CPU(unsigned int, KSP); /* Saved kernel stack pointer */
@ -54,6 +53,9 @@ void __init setup_arch(char **cmdline_p)
{
*cmdline_p = boot_command_line;
setup_memory();
parse_early_param();
console_verbose();
unflatten_device_tree();
@ -62,13 +64,6 @@ void __init setup_arch(char **cmdline_p)
microblaze_cache_init();
setup_memory();
#ifdef CONFIG_EARLY_PRINTK
/* remap early console to virtual address */
remap_early_printk();
#endif
xilinx_pci_init();
#if defined(CONFIG_DUMMY_CONSOLE)
@ -133,10 +128,6 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
/* initialize device tree for usage in early_printk */
early_init_devtree(_fdt_start);
#ifdef CONFIG_EARLY_PRINTK
setup_early_printk(NULL);
#endif
/* setup kernel_tlb after BSS cleaning
* Maybe worth to move to asm code */
kernel_tlb = tlb0 + tlb1;