From 96a3f525708120379013d9d3265663c07ceb38d5 Mon Sep 17 00:00:00 2001 From: Paul Barker Date: Tue, 25 Jun 2024 21:03:14 +0100 Subject: [PATCH] arm64: dts: renesas: rzg2l: Set Ethernet PVDD to 1.8V On the RZ/G2L & RZ/V2L SMARC SOMs, the RGMII interface between the SoC and the Ethernet PHY operates at 1.8V. The power supply for this interface may be correctly configured in u-boot, but the kernel should not be relying on this. Now that the RZ/G2L pinctrl driver supports configuring the Ethernet power supply voltage, we can simply specify the desired voltage in the device tree. Signed-off-by: Paul Barker Reviewed-by: Geert Uytterhoeven Acked-by: Linus Walleij Link: https://lore.kernel.org/20240625200316.4282-8-paul.barker.ct@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- .../boot/dts/renesas/rzg2l-smarc-som.dtsi | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi index 2b5e037ea9fa..83f5642d0d35 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi @@ -182,6 +182,7 @@ eth0_pins: eth0 { txc { pinmux = ; /* ET0_TXC */ + power-source = <1800>; output-enable; }; @@ -199,14 +200,19 @@ , /* ET0_RXD0 */ , /* ET0_RXD1 */ , /* ET0_RXD2 */ - , /* ET0_RXD3 */ - ; /* IRQ2 */ + ; /* ET0_RXD3 */ + power-source = <1800>; + }; + + irq { + pinmux = ; /* IRQ2 */ }; }; eth1_pins: eth1 { txc { pinmux = ; /* ET1_TXC */ + power-source = <1800>; output-enable; }; @@ -224,8 +230,12 @@ , /* ET1_RXD0 */ , /* ET1_RXD1 */ , /* ET1_RXD2 */ - , /* ET1_RXD3 */ - ; /* IRQ3 */ + ; /* ET1_RXD3 */ + power-source = <1800>; + }; + + irq { + pinmux = ; /* IRQ3 */ }; };