powerpc, KVM: Split HVMODE_206 cpu feature bit into separate HV and architecture bits

This replaces the single CPU_FTR_HVMODE_206 bit with two bits, one to
indicate that we have a usable hypervisor mode, and another to indicate
that the processor conforms to PowerISA version 2.06.  We also add
another bit to indicate that the processor conforms to ISA version 2.01
and set that for PPC970 and derivatives.

Some PPC970 chips (specifically those in Apple machines) have a
hypervisor mode in that MSR[HV] is always 1, but the hypervisor mode
is not useful in the sense that there is no way to run any code in
supervisor mode (HV=0 PR=0).  On these processors, the LPES0 and LPES1
bits in HID4 are always 0, and we use that as a way of detecting that
hypervisor mode is not useful.

Where we have a feature section in assembly code around code that
only applies on POWER7 in hypervisor mode, we use a construct like

END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)

The definition of END_FTR_SECTION_IFSET is such that the code will
be enabled (not overwritten with nops) only if all bits in the
provided mask are set.

Note that the CPU feature check in __tlbie() only needs to check the
ARCH_206 bit, not the HVMODE bit, because __tlbie() can only get called
if we are running bare-metal, i.e. in hypervisor mode.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This commit is contained in:
Paul Mackerras 2011-06-29 00:26:11 +00:00 committed by Avi Kivity
parent aa04b4cc5b
commit 969391c58a
11 changed files with 56 additions and 26 deletions

View File

@ -179,8 +179,9 @@ extern const char *powerpc_base_platform;
#define LONG_ASM_CONST(x) 0
#endif
#define CPU_FTR_HVMODE_206 LONG_ASM_CONST(0x0000000800000000)
#define CPU_FTR_HVMODE LONG_ASM_CONST(0x0000000200000000)
#define CPU_FTR_ARCH_201 LONG_ASM_CONST(0x0000000400000000)
#define CPU_FTR_ARCH_206 LONG_ASM_CONST(0x0000000800000000)
#define CPU_FTR_CFAR LONG_ASM_CONST(0x0000001000000000)
#define CPU_FTR_IABR LONG_ASM_CONST(0x0000002000000000)
#define CPU_FTR_MMCRA LONG_ASM_CONST(0x0000004000000000)
@ -401,9 +402,10 @@ extern const char *powerpc_base_platform;
CPU_FTR_MMCRA | CPU_FTR_CP_USE_DCBTZ | \
CPU_FTR_STCX_CHECKS_ADDRESS)
#define CPU_FTRS_PPC970 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_201 | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA | \
CPU_FTR_CP_USE_DCBTZ | CPU_FTR_STCX_CHECKS_ADDRESS)
CPU_FTR_CP_USE_DCBTZ | CPU_FTR_STCX_CHECKS_ADDRESS | \
CPU_FTR_HVMODE)
#define CPU_FTRS_POWER5 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_MMCRA | CPU_FTR_SMT | \
@ -417,13 +419,13 @@ extern const char *powerpc_base_platform;
CPU_FTR_DSCR | CPU_FTR_UNALIGNED_LD_STD | \
CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_CFAR)
#define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_HVMODE_206 |\
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\
CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_COHERENT_ICACHE | \
CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
CPU_FTR_DSCR | CPU_FTR_SAO | CPU_FTR_ASYM_SMT | \
CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
CPU_FTR_ICSWX | CPU_FTR_CFAR)
CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE)
#define CPU_FTRS_CELL (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \

View File

@ -307,6 +307,7 @@
#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */
#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */
#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */
#define HID0_HDICE_SH (63 - 23) /* 970 HDEC interrupt enable */
#define HID0_EMCP (1<<31) /* Enable Machine Check pin */
#define HID0_EBA (1<<29) /* Enable Bus Address Parity */
#define HID0_EBD (1<<28) /* Enable Bus Data Parity */
@ -362,6 +363,13 @@
#define SPRN_IABR2 0x3FA /* 83xx */
#define SPRN_IBCR 0x135 /* 83xx Insn Breakpoint Control Reg */
#define SPRN_HID4 0x3F4 /* 970 HID4 */
#define HID4_LPES0 (1ul << (63-0)) /* LPAR env. sel. bit 0 */
#define HID4_RMLS2_SH (63 - 2) /* Real mode limit bottom 2 bits */
#define HID4_LPID5_SH (63 - 6) /* partition ID bottom 4 bits */
#define HID4_RMOR_SH (63 - 22) /* real mode offset (16 bits) */
#define HID4_LPES1 (1 << (63-57)) /* LPAR env. sel. bit 1 */
#define HID4_RMLS0_SH (63 - 58) /* Real mode limit top bit */
#define HID4_LPID1_SH 0 /* partition ID top 2 bits */
#define SPRN_HID4_GEKKO 0x3F3 /* Gekko HID4 */
#define SPRN_HID5 0x3F6 /* 970 HID5 */
#define SPRN_HID6 0x3F9 /* BE HID 6 */
@ -811,28 +819,28 @@
mfspr rX,SPRN_SPRG_PACA; \
FTR_SECTION_ELSE_NESTED(66); \
mfspr rX,SPRN_SPRG_HPACA; \
ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE_206, 66)
ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE, 66)
#define SET_PACA(rX) \
BEGIN_FTR_SECTION_NESTED(66); \
mtspr SPRN_SPRG_PACA,rX; \
FTR_SECTION_ELSE_NESTED(66); \
mtspr SPRN_SPRG_HPACA,rX; \
ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE_206, 66)
ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE, 66)
#define GET_SCRATCH0(rX) \
BEGIN_FTR_SECTION_NESTED(66); \
mfspr rX,SPRN_SPRG_SCRATCH0; \
FTR_SECTION_ELSE_NESTED(66); \
mfspr rX,SPRN_SPRG_HSCRATCH0; \
ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE_206, 66)
ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE, 66)
#define SET_SCRATCH0(rX) \
BEGIN_FTR_SECTION_NESTED(66); \
mtspr SPRN_SPRG_SCRATCH0,rX; \
FTR_SECTION_ELSE_NESTED(66); \
mtspr SPRN_SPRG_HSCRATCH0,rX; \
ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE_206, 66)
ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE, 66)
#else /* CONFIG_PPC_BOOK3S_64 */
#define GET_SCRATCH0(rX) mfspr rX,SPRN_SPRG_SCRATCH0

View File

@ -45,12 +45,12 @@ _GLOBAL(__restore_cpu_power7)
blr
__init_hvmode_206:
/* Disable CPU_FTR_HVMODE_206 and exit if MSR:HV is not set */
/* Disable CPU_FTR_HVMODE and exit if MSR:HV is not set */
mfmsr r3
rldicl. r0,r3,4,63
bnelr
ld r5,CPU_SPEC_FEATURES(r4)
LOAD_REG_IMMEDIATE(r6,CPU_FTR_HVMODE_206)
LOAD_REG_IMMEDIATE(r6,CPU_FTR_HVMODE)
xor r5,r5,r6
std r5,CPU_SPEC_FEATURES(r4)
blr

View File

@ -76,7 +76,7 @@ _GLOBAL(__setup_cpu_ppc970)
/* Do nothing if not running in HV mode */
mfmsr r0
rldicl. r0,r0,4,63
beqlr
beq no_hv_mode
mfspr r0,SPRN_HID0
li r11,5 /* clear DOZE and SLEEP */
@ -90,7 +90,7 @@ _GLOBAL(__setup_cpu_ppc970MP)
/* Do nothing if not running in HV mode */
mfmsr r0
rldicl. r0,r0,4,63
beqlr
beq no_hv_mode
mfspr r0,SPRN_HID0
li r11,0x15 /* clear DOZE and SLEEP */
@ -109,6 +109,14 @@ load_hids:
sync
isync
/* Try to set LPES = 01 in HID4 */
mfspr r0,SPRN_HID4
clrldi r0,r0,1 /* clear LPES0 */
ori r0,r0,HID4_LPES1 /* set LPES1 */
sync
mtspr SPRN_HID4,r0
isync
/* Save away cpu state */
LOAD_REG_ADDR(r5,cpu_state_storage)
@ -117,11 +125,21 @@ load_hids:
std r3,CS_HID0(r5)
mfspr r3,SPRN_HID1
std r3,CS_HID1(r5)
mfspr r3,SPRN_HID4
std r3,CS_HID4(r5)
mfspr r4,SPRN_HID4
std r4,CS_HID4(r5)
mfspr r3,SPRN_HID5
std r3,CS_HID5(r5)
/* See if we successfully set LPES1 to 1; if not we are in Apple mode */
andi. r4,r4,HID4_LPES1
bnelr
no_hv_mode:
/* Disable CPU_FTR_HVMODE and exit, since we don't have HV mode */
ld r5,CPU_SPEC_FEATURES(r4)
LOAD_REG_IMMEDIATE(r6,CPU_FTR_HVMODE)
andc r5,r5,r6
std r5,CPU_SPEC_FEATURES(r4)
blr
/* Called with no MMU context (typically MSR:IR/DR off) to

View File

@ -75,7 +75,7 @@ BEGIN_FTR_SECTION
b .power7_wakeup_noloss
2: b .power7_wakeup_loss
9:
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE_206)
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
#endif /* CONFIG_PPC_P7_NAP */
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD,
NOTEST, 0x100)
@ -173,7 +173,7 @@ hardware_interrupt_hv:
_MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt,
EXC_STD, SOFTEN_TEST_PR)
KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x500)
ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE_206)
ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
STD_EXCEPTION_PSERIES(0x600, 0x600, alignment)
KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x600)

View File

@ -167,7 +167,7 @@ void setup_paca(struct paca_struct *new_paca)
* if we do a GET_PACA() before the feature fixups have been
* applied
*/
if (cpu_has_feature(CPU_FTR_HVMODE_206))
if (cpu_has_feature(CPU_FTR_HVMODE))
mtspr(SPRN_SPRG_HPACA, local_paca);
#endif
mtspr(SPRN_SPRG_PACA, local_paca);

View File

@ -128,7 +128,8 @@ void kvmppc_map_vrma(struct kvm *kvm, struct kvm_userspace_memory_region *mem)
int kvmppc_mmu_hv_init(void)
{
if (!cpu_has_feature(CPU_FTR_HVMODE_206))
if (!cpu_has_feature(CPU_FTR_HVMODE) ||
!cpu_has_feature(CPU_FTR_ARCH_206))
return -EINVAL;
memset(lpid_inuse, 0, sizeof(lpid_inuse));
set_bit(mfspr(SPRN_LPID), lpid_inuse);

View File

@ -443,7 +443,8 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
int kvmppc_core_check_processor_compat(void)
{
if (cpu_has_feature(CPU_FTR_HVMODE_206))
if (cpu_has_feature(CPU_FTR_HVMODE) &&
cpu_has_feature(CPU_FTR_ARCH_206))
return 0;
return -EIO;
}

View File

@ -90,8 +90,8 @@ void kvm_rma_init(void)
void *rma;
struct page *pg;
/* Only do this on POWER7 in HV mode */
if (!cpu_has_feature(CPU_FTR_HVMODE_206))
/* Only do this in HV mode */
if (!cpu_has_feature(CPU_FTR_HVMODE))
return;
if (!kvm_rma_size || !kvm_rma_count)

View File

@ -170,7 +170,7 @@ BEGIN_FTR_SECTION
mfspr r4,SPRN_HSRR1
andi. r12,r12,0x3ffd
b 2f
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE_206)
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
#endif
1: mfsrr0 r3
mfsrr1 r4

View File

@ -51,7 +51,7 @@ static inline void __tlbie(unsigned long va, int psize, int ssize)
va &= ~0xffful;
va |= ssize << 8;
asm volatile(ASM_FTR_IFCLR("tlbie %0,0", PPC_TLBIE(%1,%0), %2)
: : "r" (va), "r"(0), "i" (CPU_FTR_HVMODE_206)
: : "r" (va), "r"(0), "i" (CPU_FTR_ARCH_206)
: "memory");
break;
default:
@ -61,7 +61,7 @@ static inline void __tlbie(unsigned long va, int psize, int ssize)
va |= ssize << 8;
va |= 1; /* L */
asm volatile(ASM_FTR_IFCLR("tlbie %0,1", PPC_TLBIE(%1,%0), %2)
: : "r" (va), "r"(0), "i" (CPU_FTR_HVMODE_206)
: : "r" (va), "r"(0), "i" (CPU_FTR_ARCH_206)
: "memory");
break;
}