From 495bccf3917b04c6727d720b56620e265c693ace Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 21 Jul 2014 22:54:27 +0800 Subject: [PATCH 01/16] ARM: dt: sun6i: Add #address-cells and #size-cells to i2c controller nodes dtc was giving warnings for missing #address-cells and #size-cells for the new sun6i-a31-hummingbird.dts, which has a i2c-based rtc device. This patch adds the properties for all i2c controller nodes for sun6i. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 44b07e512c24..e06fbfc55bb7 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -660,6 +660,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 0>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c1: i2c@01c2b000 { @@ -670,6 +672,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 1>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c2: i2c@01c2b400 { @@ -680,6 +684,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 2>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c3: i2c@01c2b800 { @@ -690,6 +696,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 3>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; gmac: ethernet@01c30000 { From 060d517de88867b06225119beeba3a0472cc6bc5 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 22 Jul 2014 10:30:50 +0200 Subject: [PATCH 02/16] ARM: imx6: fix SMP compilation again My earlier patch 1fc593feaf8e ("ARM: imx: build i.MX6 functions only when needed") fixed a problem with building an i.MX5 kernel, but now the problem has returned for the case where we allow ARMv6K SMP builds in multiplatform. With CONFIG_CPU_V7 disabled, but i.MX3 and SMP enabled, we get this build error: arch/arm/mach-imx/built-in.o: In function `v7_secondary_startup': :(.text+0x5124): undefined reference to `v7_invalidate_l1' This puts the code inside of an "ifdef CONFIG_SOC_IMX6" to hopefully do the right thing in all configurations. Signed-off-by: Arnd Bergmann Signed-off-by: Shawn Guo --- arch/arm/mach-imx/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index ac88599ca080..23c02932bf84 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -93,9 +93,11 @@ obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o +ifdef CONFIG_SOC_IMX6 AFLAGS_headsmp.o :=-Wa,-march=armv7-a obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +endif obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o mach-imx6sx.o From 59d05b518321618177b898a6801503e31b15b25b Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sat, 26 Jul 2014 10:33:03 +0800 Subject: [PATCH 03/16] ARM: imx: fix TLB missing of IOMUXC base address during suspend After the suspend routine running in OCRAM puts DDR into self-refresh, it will access IOMUXC block to float DDR IO for power saving. A TLB missing of IOMUXC base address may happen in this case, and triggers an access to DDR, and thus hangs the system. The failure is discovered by running suspend/resume on a Cubox-i board. Though the issue is not Cubox-i specific, it can be hit the on the board quite easily with the 3.15 or 3.16 kernel. Fix the issue with a dummy access to IOMUXC block at the beginning of suspend routine, so that the address translation can be filled into TLB before DDR is put into self-refresh. Signed-off-by: Shawn Guo Cc: Acked-by: Anson Huang --- arch/arm/mach-imx/suspend-imx6.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S index 74b50f1982db..ca4ea2daf25b 100644 --- a/arch/arm/mach-imx/suspend-imx6.S +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -173,6 +173,8 @@ ENTRY(imx6_suspend) ldr r6, [r11, #0x0] ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET] ldr r6, [r11, #0x0] + ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] + ldr r6, [r11, #0x0] /* use r11 to store the IO address */ ldr r11, [r0, #PM_INFO_MX6Q_SRC_V_OFFSET] From df2160749d389933e8cf43d88e3ed2e072eafc64 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 29 Jul 2014 15:29:45 +0800 Subject: [PATCH 04/16] ARM: imx: remove unnecessary ARCH_HAS_OPP select Since ARCH_MXC already selects ARCH_HAS_OPP, it's really unnecessary for SOC_IMX27 and SOC_IMX5 to select it again. Signed-off-by: Shawn Guo --- arch/arm/mach-imx/Kconfig | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 9de84a215abd..be9a51afe05a 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -85,7 +85,6 @@ config SOC_IMX25 config SOC_IMX27 bool - select ARCH_HAS_OPP select CPU_ARM926T select IMX_HAVE_IOMUX_V1 select MXC_AVIC @@ -659,7 +658,6 @@ comment "Device tree only" config SOC_IMX5 bool - select ARCH_HAS_OPP select HAVE_IMX_SRC select MXC_TZIC From 0aa4dcb5b730f5da2540926b94d98636fe7d1cbc Mon Sep 17 00:00:00 2001 From: Bill Pringlemeir Date: Tue, 5 Aug 2014 13:34:00 -0400 Subject: [PATCH 05/16] ARM: dts: vf610-twr: Fix pinctrl_esdhc1 pin definitions. Previous version had an extra 'fsl' which made the pins not match any entry. The console message, vf610-pinctrl 40048000.iomuxc: no fsl,pins property in node \ /soc/aips-bus@40000000/iomuxc@40048000/vf610-twr/esdhc1grp is displayed without the fix. The prior version would generally work as u-boot sets the pins properly for sdhc. This change allows Linux sdhc use even if u-boot is built without sdhc support. Signed-off-by: Bill Pringlemeir Acked-by: Stefan Agner Fixes: 0517fe6aa880 ("ARM: dts: vf610-twr: Add support for sdhc1") Cc: Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-twr.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 11d733406c7e..b8a5e8c68f06 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -168,7 +168,7 @@ }; pinctrl_esdhc1: esdhc1grp { - fsl,fsl,pins = < + fsl,pins = < VF610_PAD_PTA24__ESDHC1_CLK 0x31ef VF610_PAD_PTA25__ESDHC1_CMD 0x31ef VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef From 2f643105e53256058d53bc26867c441fe70f21fc Mon Sep 17 00:00:00 2001 From: Silvio Fricke Date: Mon, 11 Aug 2014 15:53:11 +0200 Subject: [PATCH 06/16] ARM: dts: imx6: edmqmx6: change enet reset pin Signed-off-by: Silvio Fricke Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index 8c1cb53464a0..4fa254347798 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -119,7 +119,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 23 0>; + phy-reset-gpios = <&gpio1 25 0>; phy-supply = <&vgen2_1v2_eth>; status = "okay"; }; @@ -339,6 +339,7 @@ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 >; }; From 6248c273eb305fb4fa3240cc0b840118c44cd122 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Tue, 12 Aug 2014 17:26:03 +0800 Subject: [PATCH 07/16] ARM: imx: correct gpu2d_axi and gpu3d_axi clock setting On i.MX6Q, gpu2d_axi and gpu3d_axi are either from AXI or AHB clock, but on i.MX6DL, gpu2d_axi and gpu3d_axi are from mmdc_ch0_axi_podf, and they can NOT be gated by mmdc_ch0_axi 's clock gate, the mux option register field(CCM_CBCMR) is marked as "Reserved" now on i.MX6DL RM, so correct these two clks setting. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 6cceb7765c14..29d412975aff 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -194,6 +194,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); clk[IMX6QDL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2); + if (cpu_is_imx6dl()) { + clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1); + clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1); + } clk[IMX6QDL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); clk[IMX6QDL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock); @@ -217,8 +221,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); clk[IMX6QDL_CLK_ASRC_SEL] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); clk[IMX6QDL_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels)); - clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); - clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); + if (cpu_is_imx6q()) { + clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); + clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); + } clk[IMX6QDL_CLK_GPU2D_CORE_SEL] = imx_clk_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels)); clk[IMX6QDL_CLK_GPU3D_CORE_SEL] = imx_clk_mux("gpu3d_core_sel", base + 0x18, 4, 2, gpu3d_core_sels, ARRAY_SIZE(gpu3d_core_sels)); clk[IMX6QDL_CLK_GPU3D_SHADER_SEL] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels)); From fa97d2f7448a2f998bca0f4d4e40d6ad49026554 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Wed, 13 Aug 2014 15:47:47 +0200 Subject: [PATCH 08/16] ARM: dts: i.MX53: fix apparent bug in VPU clks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The VPU on i.MX53 has two distinct clocks for register access and internal function. Signed-off-by: Lothar Waßmann Fixes: fbf970f61eb9 ("ARM: dts: mx53qsb: Enable VPU support") Cc: Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 64fa27b36be0..c6c58c1c00e3 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -731,7 +731,7 @@ compatible = "fsl,imx53-vpu"; reg = <0x63ff4000 0x1000>; interrupts = <9>; - clocks = <&clks IMX5_CLK_VPU_GATE>, + clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>, <&clks IMX5_CLK_VPU_GATE>; clock-names = "per", "ahb"; resets = <&src 1>; From 3bc4d037c6791c5089a04845995410aac4fdb514 Mon Sep 17 00:00:00 2001 From: Fugang Duan Date: Mon, 18 Aug 2014 16:11:24 +0800 Subject: [PATCH 09/16] ARM: dts: imx6sx: fix the pad setting for uart CTS_B The current pinfunc define all uart CTS_B IO port for DCE uart 'CTS_B' IP port. Since uart IP port 'CTS_B' is output, and it don't need to set 'SELECT_INPUT' bit. Signed-off-by: Fugang Duan Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sx-pinfunc.h | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h index 3e0b816dac08..bb9c6b78cb97 100644 --- a/arch/arm/boot/dts/imx6sx-pinfunc.h +++ b/arch/arm/boot/dts/imx6sx-pinfunc.h @@ -78,7 +78,7 @@ #define MX6SX_PAD_GPIO1_IO07__USDHC2_WP 0x0030 0x0378 0x0870 0x1 0x1 #define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO 0x0030 0x0378 0x0770 0x2 0x0 #define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK 0x0030 0x0378 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x082C 0x4 0x1 +#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x0000 0x4 0x0 #define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7 0x0030 0x0378 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET 0x0030 0x0378 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT 0x0030 0x0378 0x0000 0x7 0x0 @@ -96,7 +96,7 @@ #define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B 0x0038 0x0380 0x0000 0x1 0x0 #define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1 0x0038 0x0380 0x0820 0x2 0x0 #define MX6SX_PAD_GPIO1_IO09__CCM_OUT0 0x0038 0x0380 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0834 0x4 0x1 +#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0000 0x4 0x0 #define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x0038 0x0380 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT 0x0038 0x0380 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4 0x0038 0x0380 0x0000 0x7 0x0 @@ -213,7 +213,7 @@ #define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2 0x0068 0x03B0 0x079C 0x1 0x1 #define MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x0068 0x03B0 0x07C4 0x2 0x2 #define MX6SX_PAD_CSI_DATA07__KPP_ROW_7 0x0068 0x03B0 0x07DC 0x3 0x0 -#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0854 0x4 0x1 +#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21 0x0068 0x03B0 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16 0x0068 0x03B0 0x0000 0x6 0x0 #define MX6SX_PAD_CSI_DATA07__DCIC1_OUT 0x0068 0x03B0 0x0000 0x7 0x0 @@ -254,7 +254,7 @@ #define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC 0x0078 0x03C0 0x0708 0x0 0x0 #define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0 0x0078 0x03C0 0x07A4 0x1 0x1 #define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x0078 0x03C0 0x0674 0x2 0x1 -#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0844 0x3 0x3 +#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0000 0x3 0x0 #define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT 0x0078 0x03C0 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25 0x0078 0x03C0 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24 0x0078 0x03C0 0x0000 0x6 0x0 @@ -352,7 +352,7 @@ #define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00A0 0x03E8 0x0000 0x0 0x0 #define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00A0 0x03E8 0x076C 0x1 0x1 #define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA 0x00A0 0x03E8 0x07BC 0x2 0x1 -#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x082C 0x3 0x3 +#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x0000 0x3 0x0 #define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK 0x00A0 0x03E8 0x07E8 0x4 0x1 #define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x00A0 0x03E8 0x0000 0x5 0x0 #define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR 0x00A0 0x03E8 0x0000 0x6 0x0 @@ -404,7 +404,7 @@ #define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK 0x00B4 0x03FC 0x0808 0x7 0x0 #define MX6SX_PAD_KEY_ROW0__KPP_ROW_0 0x00B8 0x0400 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW0__USDHC3_WP 0x00B8 0x0400 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0854 0x2 0x3 +#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x00B8 0x0400 0x0718 0x3 0x0 #define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x00B8 0x0400 0x0660 0x4 0x0 #define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x00B8 0x0400 0x0000 0x5 0x0 @@ -423,7 +423,7 @@ #define MX6SX_PAD_KEY_ROW1__M4_NMI 0x00BC 0x0404 0x0000 0x8 0x0 #define MX6SX_PAD_KEY_ROW2__KPP_ROW_2 0x00C0 0x0408 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW2__USDHC4_WP 0x00C0 0x0408 0x0878 0x1 0x1 -#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x084C 0x2 0x3 +#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_ROW2__CAN1_RX 0x00C0 0x0408 0x068C 0x3 0x1 #define MX6SX_PAD_KEY_ROW2__CANFD_RX1 0x00C0 0x0408 0x0694 0x4 0x1 #define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x00C0 0x0408 0x0000 0x5 0x0 @@ -815,7 +815,7 @@ #define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05 0x0164 0x04AC 0x0000 0x0 0x0 #define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5 0x0164 0x04AC 0x0000 0x1 0x0 #define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS 0x0164 0x04AC 0x0000 0x2 0x0 -#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x083C 0x3 0x1 +#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x0000 0x3 0x0 #define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC 0x0164 0x04AC 0x064C 0x4 0x0 #define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0x0164 0x04AC 0x0000 0x5 0x0 #define MX6SX_PAD_NAND_DATA05__WEIM_AD_5 0x0164 0x04AC 0x0000 0x6 0x0 @@ -957,7 +957,7 @@ #define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12 0x019C 0x04E4 0x0000 0x7 0x0 #define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3 0x019C 0x04E4 0x0000 0x9 0x0 #define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0 0x01A0 0x04E8 0x0000 0x0 0x0 -#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x083C 0x1 0x4 +#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x0000 0x1 0x0 #define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI 0x01A0 0x04E8 0x0738 0x2 0x1 #define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS 0x01A0 0x04E8 0x0778 0x3 0x2 #define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22 0x01A0 0x04E8 0x06F4 0x4 0x1 @@ -1236,7 +1236,7 @@ #define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x0230 0x0578 0x0670 0x1 0x1 #define MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x0230 0x0578 0x0000 0x2 0x0 #define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2 0x0230 0x0578 0x0000 0x3 0x0 -#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0834 0x4 0x2 +#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0000 0x4 0x0 #define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4 0x0230 0x0578 0x0000 0x5 0x0 #define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY 0x0230 0x0578 0x0000 0x6 0x0 #define MX6SX_PAD_SD1_DATA2__CCM_OUT0 0x0230 0x0578 0x0000 0x7 0x0 @@ -1315,7 +1315,7 @@ #define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3 0x024C 0x0594 0x0000 0x8 0x0 #define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31 0x024C 0x0594 0x0000 0x9 0x0 #define MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x0250 0x0598 0x0000 0x0 0x0 -#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0844 0x1 0x0 +#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0000 0x1 0x0 #define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK 0x0250 0x0598 0x0740 0x2 0x0 #define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS 0x0250 0x0598 0x0680 0x3 0x0 #define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC 0x0250 0x0598 0x0000 0x4 0x0 @@ -1409,7 +1409,7 @@ #define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x0274 0x05BC 0x0000 0x0 0x0 #define MX6SX_PAD_SD3_DATA7__CAN1_RX 0x0274 0x05BC 0x068C 0x1 0x0 #define MX6SX_PAD_SD3_DATA7__CANFD_RX1 0x0274 0x05BC 0x0694 0x2 0x0 -#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x083C 0x3 0x3 +#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x0000 0x3 0x0 #define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5 0x0274 0x05BC 0x0000 0x4 0x0 #define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9 0x0274 0x05BC 0x0000 0x5 0x0 #define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN 0x0274 0x05BC 0x0000 0x6 0x0 @@ -1510,7 +1510,7 @@ #define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1 0x0298 0x05E0 0x0000 0x9 0x0 #define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x029C 0x05E4 0x0000 0x0 0x0 #define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08 0x029C 0x05E4 0x0000 0x1 0x0 -#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x084C 0x2 0x1 +#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x0000 0x2 0x0 #define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0 0x029C 0x05E4 0x073C 0x3 0x0 #define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15 0x029C 0x05E4 0x0000 0x4 0x0 #define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x029C 0x05E4 0x0000 0x5 0x0 From 4cde3733daa044961cdd3b9be63eee73c8b34589 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Wed, 16 Jul 2014 09:50:05 +0100 Subject: [PATCH 10/16] ARM: dts: Enable PMIC interrupts on ODROID The ODROID kernel shows that the PMIC interrupt line is hooked up to pin GPX3-2. This is needed for the max77686-irq driver to create the PMIC IRQ domain, which is needed by max77686-rtc. Signed-off-by: Daniel Drake Tested-by: Tomeu Vizoso Signed-off-by: Olof Johansson --- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 6d6d23c83d30..cb6f55f24ccf 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -148,6 +148,10 @@ max77686: pmic@09 { compatible = "maxim,max77686"; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; reg = <0x09>; #clock-cells = <1>; @@ -368,4 +372,11 @@ samsung,pins = "gpx1-3"; samsung,pin-pud = <0>; }; + + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; From 95d516b9fca8ce77d6babd0c35513e7354441e7d Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Wed, 16 Jul 2014 09:50:06 +0100 Subject: [PATCH 11/16] ARM: dts: ODROID i2c improvements Increase max i2c bus frequency beyond the default for faster data transfers. According to the manual, these faster speeds are only available when the board is wired up the right way. In this case, the vendor kernel has run at this speed for a long time. sda-delay is needed for talking to RTC on PMIC, otherwise the i2c controller never sees an ACK. Strangely the other PMIC i2c slave (the main one) works fine even without this delay. I Chose value 100 to match the vendor kernel. Signed-off-by: Daniel Drake Reviewed-by: Tomasz Figa Tested-by: Tomeu Vizoso Signed-off-by: Olof Johansson --- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index cb6f55f24ccf..adadaf97ac01 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -134,6 +134,8 @@ i2c@13860000 { pinctrl-0 = <&i2c0_bus>; pinctrl-names = "default"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; status = "okay"; usb3503: usb3503@08 { From 1302d32c8411f8cff75ce722451767c3aa5e9fda Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Mon, 11 Aug 2014 19:51:44 +0200 Subject: [PATCH 12/16] ARM: dts: rockchip: readd missing mmc0 pinctrl settings During the restructuring of the Rockchip Cortex-A9 dtsi files it seems like the pinctrl settings vanished at some point from the mmc0 support. This of course renders them unusable, so readd the necessary pinctrl properties. Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3066a-bqcurie2.dts | 2 ++ arch/arm/boot/dts/rk3188-radxarock.dts | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index 042f821d9e4d..c9d912da6141 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -149,6 +149,8 @@ &mmc0 { /* sdmmc */ num-slots = <1>; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; slot@0 { diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 171b610db709..5e4e3c238b2d 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -179,6 +179,8 @@ &mmc0 { num-slots = <1>; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; slot@0 { From 00250b529313d6262bb0ebbd6bdf0a88c809f6f0 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Wed, 20 Aug 2014 12:31:03 +0200 Subject: [PATCH 13/16] MAINTAINERS: add new Rockchip SoC list Add the new list that Rockchip-specific patches should also be directed to. Signed-off-by: Heiko Stuebner --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index aefa94841ff3..c2ecffb61f68 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1277,6 +1277,7 @@ F: drivers/scsi/arm/ ARM/Rockchip SoC support M: Heiko Stuebner L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +L: linux-rockchip@lists.infradead.org S: Maintained F: arch/arm/mach-rockchip/ F: drivers/*/*rockchip* From caa9eac5bcc835cfd98085fcd3944f44890d8a8f Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 22 Aug 2014 13:25:10 -0600 Subject: [PATCH 14/16] ARM: tegra: apalis/colibri t30: fix on-module 5v0 supplies Working on Gigabit/PCIe support in U-Boot for Apalis T30 I realised that the current device tree source includes for our modules only happen to work due to referencing the on-carrier 5v0 supply from USB which is not at all available on-module. The modules actually contain TPS60150 charge pumps to generate the PMIC required 5 volts from the one and only 3.3 volt module supply. This patch fixes this. (Note: When back-porting this to v3.16 stable releases, simply drop the change to tegra30-apalis.dtsi; that file was added in v3.17) Cc: #v3.16+ Signed-off-by: Marcel Ziswiler Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson --- arch/arm/boot/dts/tegra30-apalis.dtsi | 11 ++++++++++- arch/arm/boot/dts/tegra30-colibri.dtsi | 11 ++++++++++- 2 files changed, 20 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 8adaa7871dd3..a5446cba9804 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -423,7 +423,7 @@ vcc4-supply = <&sys_3v3_reg>; vcc5-supply = <&sys_3v3_reg>; vcc6-supply = <&vio_reg>; - vcc7-supply = <&sys_5v0_reg>; + vcc7-supply = <&charge_pump_5v0_reg>; vccio-supply = <&sys_3v3_reg>; regulators { @@ -674,5 +674,14 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + charge_pump_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; }; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index bf16f8e65627..c4ed1bec4d92 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -201,7 +201,7 @@ vcc4-supply = <&sys_3v3_reg>; vcc5-supply = <&sys_3v3_reg>; vcc6-supply = <&vio_reg>; - vcc7-supply = <&sys_5v0_reg>; + vcc7-supply = <&charge_pump_5v0_reg>; vccio-supply = <&sys_3v3_reg>; regulators { @@ -373,5 +373,14 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + charge_pump_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; }; From 12266db732ff3845eaa9ba9354c4938249787aaf Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 15 Aug 2014 07:19:10 +0900 Subject: [PATCH 15/16] ARM: shmobile: koelsch: Remove non-existent i2c6 pinmux On r8a7791, i2c6 (aka iic3) doesn't need pinmux, but the koelsch dts refers to non-existent pinmux configuration data: pinmux core: sh-pfc does not support function i2c6 sh-pfc e6060000.pfc: invalid function i2c6 in map table Remove it to fix this. Fixes: commit 1d41f36a68c0f4e9b01d563ce33bab5201858b54 ("ARM: shmobile: koelsch dts: Add VDD MPU regulator for DVFS") Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman Signed-off-by: Olof Johansson --- arch/arm/boot/dts/r8a7791-koelsch.dts | 7 ------- 1 file changed, 7 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 23486c081a69..be59014474b2 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -275,11 +275,6 @@ renesas,function = "msiof0"; }; - i2c6_pins: i2c6 { - renesas,groups = "i2c6"; - renesas,function = "i2c6"; - }; - usb0_pins: usb0 { renesas,groups = "usb0"; renesas,function = "usb0"; @@ -420,8 +415,6 @@ }; &i2c6 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_pins>; status = "okay"; clock-frequency = <100000>; From bf87bb12bd7062bf577163f3f6d765debbae6200 Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Mon, 18 Aug 2014 18:20:49 +0100 Subject: [PATCH 16/16] bus: arm-ccn: Fix warning message A message warning a user about wrong vc value was printing out port instead. Reported-by: Drew Richardson Signed-off-by: Pawel Moll Signed-off-by: Olof Johansson --- drivers/bus/arm-ccn.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c index 3266f8ff9311..6f550d9e7a2d 100644 --- a/drivers/bus/arm-ccn.c +++ b/drivers/bus/arm-ccn.c @@ -662,7 +662,7 @@ static int arm_ccn_pmu_event_init(struct perf_event *event) } if (e->num_vcs && vc >= e->num_vcs) { dev_warn(ccn->dev, "Invalid vc %d for node/XP %d!\n", - port, node_xp); + vc, node_xp); return -EINVAL; } valid = 1;