iio: adc: spear_adc: Make use of device properties

Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.

Include mod_devicetable.h explicitly to replace the dropped of.h
which included mod_devicetable.h indirectly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240228203023.3609181-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit is contained in:
Andy Shevchenko 2024-02-28 22:30:23 +02:00 committed by Jonathan Cameron
parent 582021f4e9
commit 9266dba068

View File

@ -5,8 +5,10 @@
* Copyright 2012 Stefan Roese <sr@denx.de>
*/
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/kernel.h>
@ -15,8 +17,6 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/completion.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
@ -70,7 +70,7 @@ struct adc_regs_spear6xx {
};
struct spear_adc_state {
struct device_node *np;
struct device *dev;
struct adc_regs_spear3xx __iomem *adc_base_spear3xx;
struct adc_regs_spear6xx __iomem *adc_base_spear6xx;
struct clk *clk;
@ -123,7 +123,7 @@ static void spear_adc_set_ctrl(struct spear_adc_state *st, int n,
static u32 spear_adc_get_average(struct spear_adc_state *st)
{
if (of_device_is_compatible(st->np, "st,spear600-adc")) {
if (device_is_compatible(st->dev, "st,spear600-adc")) {
return __raw_readl(&st->adc_base_spear6xx->average.msb) &
SPEAR_ADC_DATA_MASK;
} else {
@ -134,7 +134,7 @@ static u32 spear_adc_get_average(struct spear_adc_state *st)
static void spear_adc_set_scanrate(struct spear_adc_state *st, u32 rate)
{
if (of_device_is_compatible(st->np, "st,spear600-adc")) {
if (device_is_compatible(st->dev, "st,spear600-adc")) {
__raw_writel(SPEAR600_ADC_SCAN_RATE_LO(rate),
&st->adc_base_spear6xx->scan_rate_lo);
__raw_writel(SPEAR600_ADC_SCAN_RATE_HI(rate),
@ -266,7 +266,6 @@ static const struct iio_info spear_adc_info = {
static int spear_adc_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct device *dev = &pdev->dev;
struct spear_adc_state *st;
struct iio_dev *indio_dev = NULL;
@ -279,11 +278,10 @@ static int spear_adc_probe(struct platform_device *pdev)
"failed allocating iio device\n");
st = iio_priv(indio_dev);
st->dev = dev;
mutex_init(&st->lock);
st->np = np;
/*
* SPEAr600 has a different register layout than other SPEAr SoC's
* (e.g. SPEAr3xx). Let's provide two register base addresses
@ -310,8 +308,7 @@ static int spear_adc_probe(struct platform_device *pdev)
if (ret < 0)
return dev_err_probe(dev, ret, "failed requesting interrupt\n");
if (of_property_read_u32(np, "sampling-frequency",
&st->sampling_freq))
if (device_property_read_u32(dev, "sampling-frequency", &st->sampling_freq))
return dev_err_probe(dev, -EINVAL,
"sampling-frequency missing in DT\n");
@ -319,13 +316,13 @@ static int spear_adc_probe(struct platform_device *pdev)
* Optional avg_samples defaults to 0, resulting in single data
* conversion
*/
of_property_read_u32(np, "average-samples", &st->avg_samples);
device_property_read_u32(dev, "average-samples", &st->avg_samples);
/*
* Optional vref_external defaults to 0, resulting in internal vref
* selection
*/
of_property_read_u32(np, "vref-external", &st->vref_external);
device_property_read_u32(dev, "vref-external", &st->vref_external);
spear_adc_configure(st);
@ -346,19 +343,17 @@ static int spear_adc_probe(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_OF
static const struct of_device_id spear_adc_dt_ids[] = {
{ .compatible = "st,spear600-adc", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, spear_adc_dt_ids);
#endif
static struct platform_driver spear_adc_driver = {
.probe = spear_adc_probe,
.driver = {
.name = SPEAR_ADC_MOD_NAME,
.of_match_table = of_match_ptr(spear_adc_dt_ids),
.of_match_table = spear_adc_dt_ids,
},
};