Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-23 20:51:44 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge 3.9-rc4 into driver-core-next

Browse Source
This commit is contained in:
Greg Kroah-Hartman 2013-03-25 08:34:47 -07:00
commit 91721197de
634 changed files with 5763 additions and 3259 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
CREDITS
View File

@ -1510,6 +1510,14 @@ D: Natsemi ethernet
D: Cobalt Networks (x86) support
D: This-and-That
N: Mark M. Hoffman
E: mhoffman@lightlink.com
D: asb100, lm93 and smsc47b397 hardware monitoring drivers
D: hwmon subsystem core
D: hwmon subsystem maintainer
D: i2c-sis96x and i2c-stub SMBus drivers
S: USA
N: Dirk Hohndel
E: hohndel@suse.de
D: The XFree86[tm] Project

6
Documentation/devicetree/bindings/mfd/ab8500.txt
View File

@ -13,9 +13,6 @@ Required parent device properties:
4 = active high level-sensitive
8 = active low level-sensitive
Optional parent device properties:
- reg : contains the PRCMU mailbox address for the AB8500 i2c port
The AB8500 consists of a large and varied group of sub-devices:
Device IRQ Names Supply Names Description
@ -86,9 +83,8 @@ Non-standard child device properties:
- stericsson,amic2-bias-vamic1 : Analoge Mic wishes to use a non-standard Vamic
- stericsson,earpeice-cmv : Earpeice voltage (only: 950 | 1100 | 1270 | 1580)
ab8500@5 {
ab8500 {
compatible = "stericsson,ab8500";
reg = <5>; /* mailbox 5 is i2c */
interrupts = <0 40 0x4>;
interrupt-controller;
#interrupt-cells = <2>;

3
Documentation/devicetree/bindings/tty/serial/of-serial.txt
View File

@ -11,6 +11,9 @@ Required properties:
- "nvidia,tegra20-uart"
- "nxp,lpc3220-uart"
- "ibm,qpace-nwp-serial"
- "altr,16550-FIFO32"
- "altr,16550-FIFO64"
- "altr,16550-FIFO128"
- "serial" if the port type is unknown.
- reg : offset and length of the register set for the device.
- interrupts : should contain uart interrupt.

2
Documentation/hwmon/lm75
View File

@ -23,7 +23,7 @@ Supported chips:
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/
* Microchip (TelCom) TCN75
Prefix: 'lm75'
Prefix: 'tcn75'
Addresses scanned: none
Datasheet: Publicly available at the Microchip website
http://www.microchip.com/

2
Documentation/i2c/busses/i2c-diolan-u2c
View File

@ -5,7 +5,7 @@ Supported adapters:
Documentation:
http://www.diolan.com/i2c/u2c12.html
Author: Guenter Roeck <guenter.roeck@ericsson.com>
Author: Guenter Roeck <linux@roeck-us.net>
Description
-----------

65
Documentation/input/alps.txt
View File

@ -3,10 +3,26 @@ ALPS Touchpad Protocol
Introduction
------------
Currently the ALPS touchpad driver supports five protocol versions in use by
ALPS touchpads, called versions 1, 2, 3, 4 and 5.
Currently the ALPS touchpad driver supports four protocol versions in use by
ALPS touchpads, called versions 1, 2, 3, and 4. Information about the various
protocol versions is contained in the following sections.
Since roughly mid-2010 several new ALPS touchpads have been released and
integrated into a variety of laptops and netbooks. These new touchpads
have enough behavior differences that the alps_model_data definition
table, describing the properties of the different versions, is no longer
adequate. The design choices were to re-define the alps_model_data
table, with the risk of regression testing existing devices, or isolate
the new devices outside of the alps_model_data table. The latter design
choice was made. The new touchpad signatures are named: "Rushmore",
"Pinnacle", and "Dolphin", which you will see in the alps.c code.
For the purposes of this document, this group of ALPS touchpads will
generically be called "new ALPS touchpads".
We experimented with probing the ACPI interface _HID (Hardware ID)/_CID
(Compatibility ID) definition as a way to uniquely identify the
different ALPS variants but there did not appear to be a 1:1 mapping.
In fact, it appeared to be an m:n mapping between the _HID and actual
hardware type.
Detection
---------
@ -20,9 +36,13 @@ If the E6 report is successful, the touchpad model is identified using the "E7
report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is
matched against known models in the alps_model_data_array.
With protocol versions 3 and 4, the E7 report model signature is always
73-02-64. To differentiate between these versions, the response from the
"Enter Command Mode" sequence must be inspected as described below.
For older touchpads supporting protocol versions 3 and 4, the E7 report
model signature is always 73-02-64. To differentiate between these
versions, the response from the "Enter Command Mode" sequence must be
inspected as described below.
The new ALPS touchpads have an E7 signature of 73-03-50 or 73-03-0A but
seem to be better differentiated by the EC Command Mode response.
Command Mode
------------
@ -47,6 +67,14 @@ address of the register being read, and the third contains the value of the
register. Registers are written by writing the value one nibble at a time
using the same encoding used for addresses.
For the new ALPS touchpads, the EC command is used to enter command
mode. The response in the new ALPS touchpads is significantly different,
and more important in determining the behavior. This code has been
separated from the original alps_model_data table and put in the
alps_identify function. For example, there seem to be two hardware init
sequences for the "Dolphin" touchpads as determined by the second byte
of the EC response.
Packet Format
-------------
@ -187,3 +215,28 @@ There are several things worth noting here.
well.
So far no v4 devices with tracksticks have been encountered.
ALPS Absolute Mode - Protocol Version 5
---------------------------------------
This is basically Protocol Version 3 but with different logic for packet
decode. It uses the same alps_process_touchpad_packet_v3 call with a
specialized decode_fields function pointer to correctly interpret the
packets. This appears to only be used by the Dolphin devices.
For single-touch, the 6-byte packet format is:
byte 0: 1 1 0 0 1 0 0 0
byte 1: 0 x6 x5 x4 x3 x2 x1 x0
byte 2: 0 y6 y5 y4 y3 y2 y1 y0
byte 3: 0 M R L 1 m r l
byte 4: y10 y9 y8 y7 x10 x9 x8 x7
byte 5: 0 z6 z5 z4 z3 z2 z1 z0
For mt, the format is:
byte 0: 1 1 1 n3 1 n2 n1 x24
byte 1: 1 y7 y6 y5 y4 y3 y2 y1
byte 2: ? x2 x1 y12 y11 y10 y9 y8
byte 3: 0 x23 x22 x21 x20 x19 x18 x17
byte 4: 0 x9 x8 x7 x6 x5 x4 x3
byte 5: 0 x16 x15 x14 x13 x12 x11 x10

77
Documentation/networking/tuntap.txt
View File

@ -105,6 +105,83 @@ Copyright (C) 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com>
Proto [2 bytes]
Raw protocol(IP, IPv6, etc) frame.
3.3 Multiqueue tuntap interface:
From version 3.8, Linux supports multiqueue tuntap which can uses multiple
file descriptors (queues) to parallelize packets sending or receiving. The
device allocation is the same as before, and if user wants to create multiple
queues, TUNSETIFF with the same device name must be called many times with
IFF_MULTI_QUEUE flag.
char *dev should be the name of the device, queues is the number of queues to
be created, fds is used to store and return the file descriptors (queues)
created to the caller. Each file descriptor were served as the interface of a
queue which could be accessed by userspace.
#include <linux/if.h>
#include <linux/if_tun.h>
int tun_alloc_mq(char *dev, int queues, int *fds)
{
struct ifreq ifr;
int fd, err, i;
if (!dev)
return -1;
memset(&ifr, 0, sizeof(ifr));
/* Flags: IFF_TUN - TUN device (no Ethernet headers)
* IFF_TAP - TAP device
*
* IFF_NO_PI - Do not provide packet information
* IFF_MULTI_QUEUE - Create a queue of multiqueue device
*/
ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_MULTI_QUEUE;
strcpy(ifr.ifr_name, dev);
for (i = 0; i < queues; i++) {
if ((fd = open("/dev/net/tun", O_RDWR)) < 0)
goto err;
err = ioctl(fd, TUNSETIFF, (void *)&ifr);
if (err) {
close(fd);
goto err;
}
fds[i] = fd;
}
return 0;
err:
for (--i; i >= 0; i--)
close(fds[i]);
return err;
}
A new ioctl(TUNSETQUEUE) were introduced to enable or disable a queue. When
calling it with IFF_DETACH_QUEUE flag, the queue were disabled. And when
calling it with IFF_ATTACH_QUEUE flag, the queue were enabled. The queue were
enabled by default after it was created through TUNSETIFF.
fd is the file descriptor (queue) that we want to enable or disable, when
enable is true we enable it, otherwise we disable it
#include <linux/if.h>
#include <linux/if_tun.h>
int tun_set_queue(int fd, int enable)
{
struct ifreq ifr;
memset(&ifr, 0, sizeof(ifr));
if (enable)
ifr.ifr_flags = IFF_ATTACH_QUEUE;
else
ifr.ifr_flags = IFF_DETACH_QUEUE;
return ioctl(fd, TUNSETQUEUE, (void *)&ifr);
}
Universal TUN/TAP device driver Frequently Asked Question.
1. What platforms are supported by TUN/TAP driver ?

2
Documentation/sound/alsa/ALSA-Configuration.txt
View File

@ -912,7 +912,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
models depending on the codec chip. The list of available models
is found in HD-Audio-Models.txt
The model name "genric" is treated as a special case. When this
The model name "generic" is treated as a special case. When this
model is given, the driver uses the generic codec parser without
"codec-patch". It's sometimes good for testing and debugging.

2
Documentation/sound/alsa/seq_oss.html
View File

@ -285,7 +285,7 @@ sample data.
<H4>
7.2.4 Close Callback</H4>
The <TT>close</TT> callback is called when this device is closed by the
applicaion. If any private data was allocated in open callback, it must
application. If any private data was allocated in open callback, it must
be released in the close callback. The deletion of ALSA port should be
done here, too. This callback must not be NULL.
<H4>

2
Documentation/trace/ftrace.txt
View File

@ -1873,7 +1873,7 @@ feature:
status\input | 0 | 1 | else |
--------------+------------+------------+------------+
not allocated |(do nothing)| alloc+swap | EINVAL |
not allocated |(do nothing)| alloc+swap |(do nothing)|
--------------+------------+------------+------------+
allocated | free | swap | clear |
--------------+------------+------------+------------+

60
MAINTAINERS
View File

@ -1338,12 +1338,6 @@ S: Maintained
F: drivers/platform/x86/asus*.c
F: drivers/platform/x86/eeepc*.c
ASUS ASB100 HARDWARE MONITOR DRIVER
M: "Mark M. Hoffman" <mhoffman@lightlink.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: drivers/hwmon/asb100.c
ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
M: Dan Williams <djbw@fb.com>
W: http://sourceforge.net/projects/xscaleiop
@ -1467,6 +1461,12 @@ F: drivers/dma/at_hdmac.c
F: drivers/dma/at_hdmac_regs.h
F: include/linux/platform_data/dma-atmel.h
ATMEL I2C DRIVER
M: Ludovic Desroches <ludovic.desroches@atmel.com>
L: linux-i2c@vger.kernel.org
S: Supported
F: drivers/i2c/busses/i2c-at91.c
ATMEL ISI DRIVER
M: Josh Wu <josh.wu@atmel.com>
L: linux-media@vger.kernel.org
@ -2629,7 +2629,7 @@ F: include/uapi/drm/
INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
M: Daniel Vetter <daniel.vetter@ffwll.ch>
L: intel-gfx@lists.freedesktop.org (subscribers-only)
L: intel-gfx@lists.freedesktop.org
L: dri-devel@lists.freedesktop.org
T: git git://people.freedesktop.org/~danvet/drm-intel
S: Supported
@ -3851,7 +3851,7 @@ F: drivers/i2c/busses/i2c-ismt.c
F: Documentation/i2c/busses/i2c-ismt
I2C/SMBUS STUB DRIVER
M: "Mark M. Hoffman" <mhoffman@lightlink.com>
M: Jean Delvare <khali@linux-fr.org>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/i2c-stub.c
@ -4005,6 +4005,22 @@ M: Stanislaw Gruszka <stf_xl@wp.pl>
S: Maintained
F: drivers/usb/atm/ueagle-atm.c
INA209 HARDWARE MONITOR DRIVER
M: Guenter Roeck <linux@roeck-us.net>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/ina209
F: Documentation/devicetree/bindings/i2c/ina209.txt
F: drivers/hwmon/ina209.c
INA2XX HARDWARE MONITOR DRIVER
M: Guenter Roeck <linux@roeck-us.net>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/ina2xx
F: drivers/hwmon/ina2xx.c
F: include/linux/platform_data/ina2xx.h
INDUSTRY PACK SUBSYSTEM (IPACK)
M: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
M: Jens Taprogge <jens.taprogge@taprogge.org>
@ -5098,6 +5114,15 @@ S: Maintained
F: Documentation/hwmon/max6650
F: drivers/hwmon/max6650.c
MAX6697 HARDWARE MONITOR DRIVER
M: Guenter Roeck <linux@roeck-us.net>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/max6697
F: Documentation/devicetree/bindings/i2c/max6697.txt
F: drivers/hwmon/max6697.c
F: include/linux/platform_data/max6697.h
MAXIRADIO FM RADIO RECEIVER DRIVER
M: Hans Verkuil <hverkuil@xs4all.nl>
L: linux-media@vger.kernel.org
@ -5622,6 +5647,14 @@ S: Maintained
F: drivers/video/riva/
F: drivers/video/nvidia/
NVM EXPRESS DRIVER
M: Matthew Wilcox <willy@linux.intel.com>
L: linux-nvme@lists.infradead.org
T: git git://git.infradead.org/users/willy/linux-nvme.git
S: Supported
F: drivers/block/nvme.c
F: include/linux/nvme.h
OMAP SUPPORT
M: Tony Lindgren <tony@atomide.com>
L: linux-omap@vger.kernel.org
@ -6412,6 +6445,8 @@ F: Documentation/networking/LICENSE.qla3xxx
F: drivers/net/ethernet/qlogic/qla3xxx.*
QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
M: Rajesh Borundia <rajesh.borundia@qlogic.com>
M: Shahed Shaikh <shahed.shaikh@qlogic.com>
M: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
M: Sony Chacko <sony.chacko@qlogic.com>
M: linux-driver@qlogic.com
@ -7171,13 +7206,6 @@ L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/sis/sis900.*
SIS 96X I2C/SMBUS DRIVER
M: "Mark M. Hoffman" <mhoffman@lightlink.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: Documentation/i2c/busses/i2c-sis96x
F: drivers/i2c/busses/i2c-sis96x.c
SIS FRAMEBUFFER DRIVER
M: Thomas Winischhofer <thomas@winischhofer.net>
W: http://www.winischhofer.net/linuxsisvga.shtml
@ -7255,7 +7283,7 @@ F: Documentation/hwmon/sch5627
F: drivers/hwmon/sch5627.c
SMSC47B397 HARDWARE MONITOR DRIVER
M: "Mark M. Hoffman" <mhoffman@lightlink.com>
M: Jean Delvare <khali@linux-fr.org>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/smsc47b397

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 9
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc4
NAME = Unicycling Gorilla
# *DOCUMENTATION*

7
arch/Kconfig
View File

@ -319,13 +319,6 @@ config ARCH_WANT_OLD_COMPAT_IPC
select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
bool
config HAVE_VIRT_TO_BUS
bool
help
An architecture should select this if it implements the
deprecated interface virt_to_bus(). All new architectures
should probably not select this.
config HAVE_ARCH_SECCOMP_FILTER
bool
help

2
arch/alpha/Kconfig
View File

@ -9,7 +9,7 @@ config ALPHA
select HAVE_PERF_EVENTS
select HAVE_DMA_ATTRS
select HAVE_GENERIC_HARDIRQS
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select AUTO_IRQ_AFFINITY if SMP
select GENERIC_IRQ_SHOW

22
arch/arm/Kconfig
View File

@ -49,7 +49,6 @@ config ARM
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_UID16
select HAVE_VIRT_TO_BUS
select KTIME_SCALAR
select PERF_USE_VMALLOC
select RTC_LIB
@ -556,7 +555,6 @@ config ARCH_IXP4XX
config ARCH_DOVE
bool "Marvell Dove"
select ARCH_REQUIRE_GPIOLIB
select COMMON_CLK_DOVE
select CPU_V7
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_PCI
@ -744,6 +742,7 @@ config ARCH_RPC
select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
select NO_IOPORT
select VIRT_TO_BUS
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
@ -879,6 +878,7 @@ config ARCH_SHARK
select ISA_DMA
select NEED_MACH_MEMORY_H
select PCI
select VIRT_TO_BUS
select ZONE_DMA
help
Support for the StrongARM based Digital DNARD machine, also known
@ -1006,12 +1006,12 @@ config ARCH_MULTI_V4_V5
bool
config ARCH_MULTI_V6
bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
bool "ARMv6 based platforms (ARM11)"
select ARCH_MULTI_V6_V7
select CPU_V6
config ARCH_MULTI_V7
bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
default y
select ARCH_MULTI_V6_V7
select ARCH_VEXPRESS
@ -1462,10 +1462,6 @@ config ISA_DMA
bool
select ISA_DMA_API
config ARCH_NO_VIRT_TO_BUS
def_bool y
depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK
# Select ISA DMA interface
config ISA_DMA_API
bool
@ -1657,13 +1653,16 @@ config LOCAL_TIMERS
accounting to be spread across the timer interval, preventing a
"thundering herd" at every timer tick.
# The GPIO number here must be sorted by descending number. In case of
# a multiplatform kernel, we just want the highest value required by the
# selected platforms.
config ARCH_NR_GPIO
int
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
default 355 if ARCH_U8500
default 264 if MACH_H4700
default 512 if SOC_OMAP5
default 355 if ARCH_U8500
default 288 if ARCH_VT8500 || ARCH_SUNXI
default 264 if MACH_H4700
default 0
help
Maximum number of GPIOs in the system.
@ -1887,8 +1886,9 @@ config XEN_DOM0
config XEN
bool "Xen guest support on ARM (EXPERIMENTAL)"
depends on ARM && OF
depends on ARM && AEABI && OF
depends on CPU_V7 && !CPU_V6
depends on !GENERIC_ATOMIC64
help
Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.

2
arch/arm/Kconfig.debug
View File

@ -492,7 +492,7 @@ config DEBUG_IMX_UART_PORT
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
DEBUG_IMX51_UART || \
DEBUG_IMX50_IMX53_UART || \
DEBUG_IMX53_UART || \
DEBUG_IMX6Q_UART
default 1
help

2
arch/arm/boot/Makefile
View File

@ -115,4 +115,4 @@ i:
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
$(obj)/Image System.map "$(INSTALL_PATH)"
subdir- := bootp compressed
subdir- := bootp compressed dts

8
arch/arm/boot/dts/armada-370-rd.dts
View File

@ -64,5 +64,13 @@
status = "okay";
/* No CD or WP GPIOs */
};
usb@d0050000 {
status = "okay";
};
usb@d0051000 {
status = "okay";
};
};
};

5
arch/arm/boot/dts/armada-370-xp.dtsi
View File

@ -31,7 +31,6 @@
mpic: interrupt-controller@d0020000 {
compatible = "marvell,mpic";
#interrupt-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
interrupt-controller;
};
@ -54,7 +53,7 @@
reg = <0xd0012000 0x100>;
reg-shift = <2>;
interrupts = <41>;
reg-io-width = <4>;
reg-io-width = <1>;
status = "disabled";
};
serial@d0012100 {
@ -62,7 +61,7 @@
reg = <0xd0012100 0x100>;
reg-shift = <2>;
interrupts = <42>;
reg-io-width = <4>;
reg-io-width = <1>;
status = "disabled";
};

4
arch/arm/boot/dts/armada-xp.dtsi
View File

@ -46,7 +46,7 @@
reg = <0xd0012200 0x100>;
reg-shift = <2>;
interrupts = <43>;
reg-io-width = <4>;
reg-io-width = <1>;
status = "disabled";
};
serial@d0012300 {
@ -54,7 +54,7 @@
reg = <0xd0012300 0x100>;
reg-shift = <2>;
interrupts = <44>;
reg-io-width = <4>;
reg-io-width = <1>;
status = "disabled";
};

28
arch/arm/boot/dts/at91sam9x5.dtsi
View File

@ -238,8 +238,32 @@
nand {
pinctrl_nand: nand-0 {
atmel,pins =
<3 4 0x0 0x1 /* PD5 gpio RDY pin pull_up */
3 5 0x0 0x1>; /* PD4 gpio enable pin pull_up */
<3 0 0x1 0x0 /* PD0 periph A Read Enable */
3 1 0x1 0x0 /* PD1 periph A Write Enable */
3 2 0x1 0x0 /* PD2 periph A Address Latch Enable */
3 3 0x1 0x0 /* PD3 periph A Command Latch Enable */
3 4 0x0 0x1 /* PD4 gpio Chip Enable pin pull_up */
3 5 0x0 0x1 /* PD5 gpio RDY/BUSY pin pull_up */
3 6 0x1 0x0 /* PD6 periph A Data bit 0 */
3 7 0x1 0x0 /* PD7 periph A Data bit 1 */
3 8 0x1 0x0 /* PD8 periph A Data bit 2 */
3 9 0x1 0x0 /* PD9 periph A Data bit 3 */
3 10 0x1 0x0 /* PD10 periph A Data bit 4 */
3 11 0x1 0x0 /* PD11 periph A Data bit 5 */
3 12 0x1 0x0 /* PD12 periph A Data bit 6 */
3 13 0x1 0x0>; /* PD13 periph A Data bit 7 */
};
pinctrl_nand_16bits: nand_16bits-0 {
atmel,pins =
<3 14 0x1 0x0 /* PD14 periph A Data bit 8 */
3 15 0x1 0x0 /* PD15 periph A Data bit 9 */
3 16 0x1 0x0 /* PD16 periph A Data bit 10 */
3 17 0x1 0x0 /* PD17 periph A Data bit 11 */
3 18 0x1 0x0 /* PD18 periph A Data bit 12 */
3 19 0x1 0x0 /* PD19 periph A Data bit 13 */
3 20 0x1 0x0 /* PD20 periph A Data bit 14 */
3 21 0x1 0x0>; /* PD21 periph A Data bit 15 */
};
};

2
arch/arm/boot/dts/bcm2835.dtsi
View File

@ -105,7 +105,7 @@
compatible = "fixed-clock";
reg = <1>;
#clock-cells = <0>;
clock-frequency = <150000000>;
clock-frequency = <250000000>;
};
};
};

3
arch/arm/boot/dts/dbx5x0.dtsi
View File

@ -319,9 +319,8 @@
};
};
ab8500@5 {
ab8500 {
compatible = "stericsson,ab8500";
reg = <5>; /* mailbox 5 is i2c */
interrupt-parent = <&intc>;
interrupts = <0 40 0x4>;
interrupt-controller;

5
arch/arm/boot/dts/dove.dtsi
View File

@ -197,6 +197,11 @@
status = "disabled";
};
rtc@d8500 {
compatible = "marvell,orion-rtc";
reg = <0xd8500 0x20>;
};
crypto: crypto@30000 {
compatible = "marvell,orion-crypto";
reg = <0x30000 0x10000>,

9
arch/arm/boot/dts/exynos4.dtsi
View File

@ -275,18 +275,27 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
interrupts = <0 35 0>;
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
};
pdma1: pdma@12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
interrupts = <0 36 0>;
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
};
mdma1: mdma@12850000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12850000 0x1000>;
interrupts = <0 34 0>;
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <1>;
};
};
};

6
arch/arm/boot/dts/exynos5440.dtsi
View File

@ -142,12 +142,18 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x120000 0x1000>;
interrupts = <0 34 0>;
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
};
pdma1: pdma@121B0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121000 0x1000>;
interrupts = <0 35 0>;
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
};
};

2
arch/arm/boot/dts/href.dtsi
View File

@ -221,7 +221,7 @@
};
};
ab8500@5 {
ab8500 {
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";

2
arch/arm/boot/dts/hrefv60plus.dts
View File

@ -158,7 +158,7 @@
};
};
ab8500@5 {
ab8500 {
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";

3
arch/arm/boot/dts/imx53-mba53.dts
View File

@ -42,10 +42,9 @@
fsl,pins = <689 0x10000 /* DISP1_DRDY */
482 0x10000 /* DISP1_HSYNC */
489 0x10000 /* DISP1_VSYNC */
684 0x10000 /* DISP1_DAT_0 */
515 0x10000 /* DISP1_DAT_22 */
523 0x10000 /* DISP1_DAT_23 */
543 0x10000 /* DISP1_DAT_21 */
545 0x10000 /* DISP1_DAT_21 */
553 0x10000 /* DISP1_DAT_20 */
558 0x10000 /* DISP1_DAT_19 */
564 0x10000 /* DISP1_DAT_18 */

2
arch/arm/boot/dts/kirkwood-dns320.dts
View File

@ -42,12 +42,10 @@
ocp@f1000000 {
serial@12000 {
clock-frequency = <166666667>;
status = "okay";
};
serial@12100 {
clock-frequency = <166666667>;
status = "okay";
};
};

1
arch/arm/boot/dts/kirkwood-dns325.dts
View File

@ -50,7 +50,6 @@
};
};
serial@12000 {
clock-frequency = <200000000>;
status = "okay";
};
};

1
arch/arm/boot/dts/kirkwood-dockstar.dts
View File

@ -37,7 +37,6 @@
};
};
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};

1
arch/arm/boot/dts/kirkwood-dreamplug.dts
View File

@ -38,7 +38,6 @@
};
};
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};

1
arch/arm/boot/dts/kirkwood-goflexnet.dts
View File

@ -73,7 +73,6 @@
};
};
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};

1
arch/arm/boot/dts/kirkwood-ib62x0.dts
View File

@ -51,7 +51,6 @@
};
};
serial@12000 {
clock-frequency = <200000000>;
status = "okay";
};

1
arch/arm/boot/dts/kirkwood-iconnect.dts
View File

@ -78,7 +78,6 @@
};
};
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};

1
arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
View File

@ -115,7 +115,6 @@
};
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};

1
arch/arm/boot/dts/kirkwood-km_kirkwood.dts
View File

@ -34,7 +34,6 @@
};
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};

1
arch/arm/boot/dts/kirkwood-lschlv2.dts
View File

@ -13,7 +13,6 @@
ocp@f1000000 {
serial@12000 {
clock-frequency = <166666667>;
status = "okay";
};
};

1
arch/arm/boot/dts/kirkwood-lsxhl.dts
View File

@ -13,7 +13,6 @@
ocp@f1000000 {
serial@12000 {
clock-frequency = <200000000>;
status = "okay";
};
};

1
arch/arm/boot/dts/kirkwood-mplcec4.dts
View File

@ -90,7 +90,6 @@
};
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};

1
arch/arm/boot/dts/kirkwood-ns2-common.dtsi
View File

@ -23,7 +23,6 @@
};
serial@12000 {
clock-frequency = <166666667>;
status = "okay";
};

1
arch/arm/boot/dts/kirkwood-nsa310.dts
View File

@ -117,7 +117,6 @@
};
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};

2
arch/arm/boot/dts/kirkwood-openblocks_a6.dts
View File

@ -18,12 +18,10 @@
ocp@f1000000 {
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};
serial@12100 {
clock-frequency = <200000000>;
status = "ok";
};

1
arch/arm/boot/dts/kirkwood-topkick.dts
View File

@ -108,7 +108,6 @@
};
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};

5
arch/arm/boot/dts/kirkwood.dtsi
View File

@ -38,6 +38,7 @@
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <35>, <36>, <37>, <38>;
clocks = <&gate_clk 7>;
};
gpio1: gpio@10140 {
@ -49,6 +50,7 @@
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <39>, <40>, <41>;
clocks = <&gate_clk 7>;
};
serial@12000 {
@ -57,7 +59,6 @@
reg-shift = <2>;
interrupts = <33>;
clocks = <&gate_clk 7>;
/* set clock-frequency in board dts */
status = "disabled";
};
@ -67,7 +68,6 @@
reg-shift = <2>;
interrupts = <34>;
clocks = <&gate_clk 7>;
/* set clock-frequency in board dts */
status = "disabled";
};
@ -75,6 +75,7 @@
compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <53>;
clocks = <&gate_clk 7>;
};
spi@10600 {

2
arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
View File

@ -11,7 +11,7 @@
/ {
model = "LaCie Ethernet Disk mini V2";
compatible = "lacie,ethernet-disk-mini-v2", "marvell-orion5x-88f5182", "marvell,orion5x";
compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x";
memory {
reg = <0x00000000 0x4000000>; /* 64 MB */

2
arch/arm/boot/dts/snowball.dts
View File

@ -298,7 +298,7 @@
};
};
ab8500@5 {
ab8500 {
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";

3
arch/arm/boot/dts/socfpga.dtsi
View File

@ -75,6 +75,9 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0xffe01000 0x1000>;
interrupts = <0 180 4>;
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
};
};

1
arch/arm/boot/dts/tegra20.dtsi
View File

@ -118,6 +118,7 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0x50040600 0x20>;
interrupts = <1 13 0x304>;
clocks = <&tegra_car 132>;
};
intc: interrupt-controller {

1
arch/arm/boot/dts/tegra30.dtsi
View File

@ -119,6 +119,7 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0x50040600 0x20>;
interrupts = <1 13 0xf04>;
clocks = <&tegra_car 214>;
};
intc: interrupt-controller {

1
arch/arm/configs/mxs_defconfig
View File

@ -116,6 +116,7 @@ CONFIG_SND_SOC=y
CONFIG_SND_MXS_SOC=y
CONFIG_SND_SOC_MXS_SGTL5000=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_STORAGE=y

2
arch/arm/configs/omap2plus_defconfig
View File

@ -126,6 +126,8 @@ CONFIG_INPUT_MISC=y
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y

25
arch/arm/include/asm/xen/events.h
View File

@ -2,6 +2,7 @@
#define _ASM_ARM_XEN_EVENTS_H
#include <asm/ptrace.h>
#include <asm/atomic.h>
enum ipi_vector {
XEN_PLACEHOLDER_VECTOR,
@ -15,26 +16,8 @@ static inline int xen_irqs_disabled(struct pt_regs *regs)
return raw_irqs_disabled_flags(regs->ARM_cpsr);
}
/*
* We cannot use xchg because it does not support 8-byte
* values. However it is safe to use {ldr,dtd}exd directly because all
* platforms which Xen can run on support those instructions.
*/
static inline xen_ulong_t xchg_xen_ulong(xen_ulong_t *ptr, xen_ulong_t val)
{
xen_ulong_t oldval;
unsigned int tmp;
wmb();
asm volatile("@ xchg_xen_ulong\n"
"1: ldrexd %0, %H0, [%3]\n"
" strexd %1, %2, %H2, [%3]\n"
" teq %1, #0\n"
" bne 1b"
: "=&r" (oldval), "=&r" (tmp)
: "r" (val), "r" (ptr)
: "memory", "cc");
return oldval;
}
#define xchg_xen_ulong(ptr, val) atomic64_xchg(container_of((ptr), \
atomic64_t, \
counter), (val))
#endif /* _ASM_ARM_XEN_EVENTS_H */

2
arch/arm/kernel/smp.c
View File

@ -480,7 +480,7 @@ static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt)
evt->features = CLOCK_EVT_FEAT_ONESHOT |
CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_DUMMY;
evt->rating = 400;
evt->rating = 100;
evt->mult = 1;
evt->set_mode = broadcast_timer_set_mode;

33
arch/arm/lib/memset.S
View File

@ -14,31 +14,15 @@
.text
.align 5
.word 0
1: subs r2, r2, #4 @ 1 do we have enough
blt 5f @ 1 bytes to align with?
cmp r3, #2 @ 1
strltb r1, [ip], #1 @ 1
strleb r1, [ip], #1 @ 1
strb r1, [ip], #1 @ 1
add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3))
/*
* The pointer is now aligned and the length is adjusted. Try doing the
* memset again.
*/
ENTRY(memset)
/*
* Preserve the contents of r0 for the return value.
*/
mov ip, r0
ands r3, ip, #3 @ 1 unaligned?
bne 1b @ 1
ands r3, r0, #3 @ 1 unaligned?
mov ip, r0 @ preserve r0 as return value
bne 6f @ 1
/*
* we know that the pointer in ip is aligned to a word boundary.
*/
orr r1, r1, r1, lsl #8
1: orr r1, r1, r1, lsl #8
orr r1, r1, r1, lsl #16
mov r3, r1
cmp r2, #16
@ -127,4 +111,13 @@ ENTRY(memset)
tst r2, #1
strneb r1, [ip], #1
mov pc, lr
6: subs r2, r2, #4 @ 1 do we have enough
blt 5b @ 1 bytes to align with?
cmp r3, #2 @ 1
strltb r1, [ip], #1 @ 1
strleb r1, [ip], #1 @ 1
strb r1, [ip], #1 @ 1
add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3))
b 1b
ENDPROC(memset)

1
arch/arm/mach-at91/board-foxg20.c
View File

@ -176,6 +176,7 @@ static struct w1_gpio_platform_data w1_gpio_pdata = {
/* If you choose to use a pin other than PB16 it needs to be 3.3V */
.pin = AT91_PIN_PB16,
.is_open_drain = 1,
.ext_pullup_enable_pin = -EINVAL,
};
static struct platform_device w1_device = {

1
arch/arm/mach-at91/board-stamp9g20.c
View File

@ -188,6 +188,7 @@ static struct spi_board_info portuxg20_spi_devices[] = {
static struct w1_gpio_platform_data w1_gpio_pdata = {
.pin = AT91_PIN_PA29,
.is_open_drain = 1,
.ext_pullup_enable_pin = -EINVAL,
};
static struct platform_device w1_device = {

8
arch/arm/mach-at91/include/mach/gpio.h
View File

@ -209,6 +209,14 @@ extern int at91_get_gpio_value(unsigned pin);
extern void at91_gpio_suspend(void);
extern void at91_gpio_resume(void);
#ifdef CONFIG_PINCTRL_AT91
extern void at91_pinctrl_gpio_suspend(void);
extern void at91_pinctrl_gpio_resume(void);
#else
static inline void at91_pinctrl_gpio_suspend(void) {}
static inline void at91_pinctrl_gpio_resume(void) {}
#endif
#endif /* __ASSEMBLY__ */
#endif

20
arch/arm/mach-at91/irq.c
View File

@ -92,23 +92,21 @@ static int at91_aic_set_wake(struct irq_data *d, unsigned value)
void at91_irq_suspend(void)
{
int i = 0, bit;
int bit = -1;
if (has_aic5()) {
/* disable enabled irqs */
while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) {
while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IDCR, 1);
i = bit;
}
/* enable wakeup irqs */
i = 0;
while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) {
bit = -1;
while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IECR, 1);
i = bit;
}
} else {
at91_aic_write(AT91_AIC_IDCR, *backups);
@ -118,23 +116,21 @@ void at91_irq_suspend(void)
void at91_irq_resume(void)
{
int i = 0, bit;
int bit = -1;
if (has_aic5()) {
/* disable wakeup irqs */
while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) {
while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IDCR, 1);
i = bit;
}
/* enable irqs disabled for suspend */
i = 0;
while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) {
bit = -1;
while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IECR, 1);
i = bit;
}
} else {
at91_aic_write(AT91_AIC_IDCR, *wakeups);

10
arch/arm/mach-at91/pm.c
View File

@ -201,7 +201,10 @@ extern u32 at91_slow_clock_sz;
static int at91_pm_enter(suspend_state_t state)
{
at91_gpio_suspend();
if (of_have_populated_dt())
at91_pinctrl_gpio_suspend();
else
at91_gpio_suspend();
at91_irq_suspend();
pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
@ -286,7 +289,10 @@ static int at91_pm_enter(suspend_state_t state)
error:
target_state = PM_SUSPEND_ON;
at91_irq_resume();
at91_gpio_resume();
if (of_have_populated_dt())
at91_pinctrl_gpio_resume();
else
at91_gpio_resume();
return 0;
}

3
arch/arm/mach-davinci/dma.c
View File

@ -743,6 +743,9 @@ EXPORT_SYMBOL(edma_free_channel);
*/
int edma_alloc_slot(unsigned ctlr, int slot)
{
if (!edma_cc[ctlr])
return -EINVAL;
if (slot >= 0)
slot = EDMA_CHAN_SLOT(slot);

1
arch/arm/mach-footbridge/Kconfig
View File

@ -67,6 +67,7 @@ config ARCH_NETWINDER
select ISA
select ISA_DMA
select PCI
select VIRT_TO_BUS
help
Say Y here if you intend to run this kernel on the Rebel.COM
NetWinder. Information about this machine can be found at:

1
arch/arm/mach-imx/clk-imx35.c
View File

@ -264,6 +264,7 @@ int __init mx35_clocks_init(void)
clk_prepare_enable(clk[gpio3_gate]);
clk_prepare_enable(clk[iim_gate]);
clk_prepare_enable(clk[emi_gate]);
clk_prepare_enable(clk[max_gate]);
/*
* SCC is needed to boot via mmc after a watchdog reset. The clock code

2
arch/arm/mach-imx/clk-imx6q.c
View File

@ -172,7 +172,7 @@ static struct clk *clk[clk_max];
static struct clk_onecell_data clk_data;
static enum mx6q_clks const clks_init_on[] __initconst = {
mmdc_ch0_axi, rom,
mmdc_ch0_axi, rom, pll1_sys,
};
static struct clk_div_table clk_enet_ref_table[] = {

18
arch/arm/mach-imx/headsmp.S
View File

@ -26,16 +26,16 @@ ENDPROC(v7_secondary_startup)
#ifdef CONFIG_PM
/*
* The following code is located into the .data section. This is to
* allow phys_l2x0_saved_regs to be accessed with a relative load
* as we are running on physical address here.
* The following code must assume it is running from physical address
* where absolute virtual addresses to the data section have to be
* turned into relative ones.
*/
.data
.align
#ifdef CONFIG_CACHE_L2X0
.macro pl310_resume
ldr r2, phys_l2x0_saved_regs
adr r0, l2x0_saved_regs_offset
ldr r2, [r0]
add r2, r2, r0
ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0
ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value
str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl
@ -43,9 +43,9 @@ ENDPROC(v7_secondary_startup)
str r1, [r0, #L2X0_CTRL] @ re-enable L2
.endm
.globl phys_l2x0_saved_regs
phys_l2x0_saved_regs:
.long 0
l2x0_saved_regs_offset:
.word l2x0_saved_regs - .
#else
.macro pl310_resume
.endm

5
arch/arm/mach-imx/imx25-dt.c
View File

@ -27,6 +27,11 @@ static const char * const imx25_dt_board_compat[] __initconst = {
NULL
};
static void __init imx25_timer_init(void)
{
mx25_clocks_init_dt();
}
DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
.map_io = mx25_map_io,
.init_early = imx25_init_early,

15
arch/arm/mach-imx/pm-imx6q.c
View File

@ -22,8 +22,6 @@
#include "common.h"
#include "hardware.h"
extern unsigned long phys_l2x0_saved_regs;
static int imx6q_suspend_finish(unsigned long val)
{
cpu_do_idle();
@ -57,18 +55,5 @@ static const struct platform_suspend_ops imx6q_pm_ops = {
void __init imx6q_pm_init(void)
{
/*
* The l2x0 core code provides an infrastucture to save and restore
* l2x0 registers across suspend/resume cycle. But because imx6q
* retains L2 content during suspend and needs to resume L2 before
* MMU is enabled, it can only utilize register saving support and
* have to take care of restoring on its own. So we save physical
* address of the data structure used by l2x0 core to save registers,
* and later restore the necessary ones in imx6q resume entry.
*/
#ifdef CONFIG_CACHE_L2X0
phys_l2x0_saved_regs = __pa(&l2x0_saved_regs);
#endif
suspend_set_ops(&imx6q_pm_ops);
}

1
arch/arm/mach-ixp4xx/vulcan-setup.c
View File

@ -163,6 +163,7 @@ static struct platform_device vulcan_max6369 = {
static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = {
.pin = 14,
.ext_pullup_enable_pin = -EINVAL,
};
static struct platform_device vulcan_w1_gpio = {

25
arch/arm/mach-kirkwood/board-dt.c
View File

@ -41,16 +41,12 @@ static void __init kirkwood_legacy_clk_init(void)
struct device_node *np = of_find_compatible_node(
NULL, NULL, "marvell,kirkwood-gating-clock");
struct of_phandle_args clkspec;
struct clk *clk;
clkspec.np = np;
clkspec.args_count = 1;
clkspec.args[0] = CGC_BIT_GE0;
orion_clkdev_add(NULL, "mv643xx_eth_port.0",
of_clk_get_from_provider(&clkspec));
clkspec.args[0] = CGC_BIT_PEX0;
orion_clkdev_add("0", "pcie",
of_clk_get_from_provider(&clkspec));
@ -59,9 +55,24 @@ static void __init kirkwood_legacy_clk_init(void)
orion_clkdev_add("1", "pcie",
of_clk_get_from_provider(&clkspec));
clkspec.args[0] = CGC_BIT_GE1;
orion_clkdev_add(NULL, "mv643xx_eth_port.1",
clkspec.args[0] = CGC_BIT_SDIO;
orion_clkdev_add(NULL, "mvsdio",
of_clk_get_from_provider(&clkspec));
/*
* The ethernet interfaces forget the MAC address assigned by
* u-boot if the clocks are turned off. Until proper DT support
* is available we always enable them for now.
*/
clkspec.args[0] = CGC_BIT_GE0;
clk = of_clk_get_from_provider(&clkspec);
orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk);
clk_prepare_enable(clk);
clkspec.args[0] = CGC_BIT_GE1;
clk = of_clk_get_from_provider(&clkspec);
orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk);
clk_prepare_enable(clk);
}
static void __init kirkwood_of_clk_init(void)

1
arch/arm/mach-mmp/gplugd.c
View File

@ -9,6 +9,7 @@
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <asm/mach/arch.h>

2
arch/arm/mach-mxs/icoll.c
View File

@ -100,7 +100,7 @@ static struct irq_domain_ops icoll_irq_domain_ops = {
.xlate = irq_domain_xlate_onecell,
};
void __init icoll_of_init(struct device_node *np,
static void __init icoll_of_init(struct device_node *np,
struct device_node *interrupt_parent)
{
/*

10
arch/arm/mach-mxs/mach-mxs.c
View File

@ -402,17 +402,17 @@ static void __init cfa10049_init(void)
{
enable_clk_enet_out();
update_fec_mac_prop(OUI_CRYSTALFONTZ);
mxsfb_pdata.mode_list = cfa10049_video_modes;
mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
}
static void __init cfa10037_init(void)
{
enable_clk_enet_out();
update_fec_mac_prop(OUI_CRYSTALFONTZ);
mxsfb_pdata.mode_list = cfa10049_video_modes;
mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
}
static void __init apf28_init(void)

1
arch/arm/mach-mxs/mm.c
View File

@ -18,6 +18,7 @@
#include <mach/mx23.h>
#include <mach/mx28.h>
#include <mach/common.h>
/*
* Define the MX23 memory map.

1
arch/arm/mach-mxs/ocotp.c
View File

@ -19,6 +19,7 @@
#include <asm/processor.h> /* for cpu_relax() */
#include <mach/mxs.h>
#include <mach/common.h>
#define OCOTP_WORD_OFFSET 0x20
#define OCOTP_WORD_COUNT 0x20

2
arch/arm/mach-omap1/common.h
View File

@ -31,6 +31,8 @@
#include <plat/i2c.h>
#include <mach/irqs.h>
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
void omap7xx_map_io(void);
#else

6
arch/arm/mach-omap2/Kconfig
View File

@ -311,9 +311,6 @@ config MACH_OMAP_ZOOM2
default y
select OMAP_PACKAGE_CBB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SERIAL_8250
select SERIAL_8250_CONSOLE
select SERIAL_CORE_CONSOLE
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
@ -321,9 +318,6 @@ config MACH_OMAP_ZOOM3
default y
select OMAP_PACKAGE_CBP
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SERIAL_8250
select SERIAL_8250_CONSOLE
select SERIAL_CORE_CONSOLE
config MACH_CM_T35
bool "CompuLab CM-T35/CM-T3730 modules"

2
arch/arm/mach-omap2/board-generic.c
View File

@ -102,6 +102,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
.init_irq = omap_intc_of_init,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_generic_init,
.init_late = omap3_init_late,
.init_time = omap3_sync32k_timer_init,
.dt_compat = omap3_boards_compat,
.restart = omap3xxx_restart,
@ -119,6 +120,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)")
.init_irq = omap_intc_of_init,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_generic_init,
.init_late = omap3_init_late,
.init_time = omap3_secure_sync32k_timer_init,
.dt_compat = omap3_gp_boards_compat,
.restart = omap3xxx_restart,

2
arch/arm/mach-omap2/board-rx51.c
View File

@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/usb/phy.h>
#include <linux/usb/musb.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
@ -98,6 +99,7 @@ static void __init rx51_init(void)
sdrc_params = nokia_get_sdram_timings();
omap_sdrc_init(sdrc_params, sdrc_params);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(&musb_board_data);
rx51_peripherals_init();

1
arch/arm/mach-omap2/common.h
View File

@ -108,7 +108,6 @@ void omap35xx_init_late(void);
void omap3630_init_late(void);
void am35xx_init_late(void);
void ti81xx_init_late(void);
void omap4430_init_late(void);
int omap2_common_pm_late_init(void);
#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)

6
arch/arm/mach-omap2/gpmc.c
View File

@ -1122,9 +1122,6 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
/* TODO: remove, see function definition */
gpmc_convert_ps_to_ns(gpmc_t);
/* Now the GPMC is initialised, unreserve the chip-selects */
gpmc_cs_map = 0;
return 0;
}
@ -1383,6 +1380,9 @@ static int gpmc_probe(struct platform_device *pdev)
if (IS_ERR_VALUE(gpmc_setup_irq()))
dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
/* Now the GPMC is initialised, unreserve the chip-selects */
gpmc_cs_map = 0;
rc = gpmc_probe_dt(pdev);
if (rc < 0) {
clk_disable_unprepare(gpmc_l3_clk);

9
arch/arm/mach-omap2/mux.c
View File

@ -211,8 +211,6 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
return -EINVAL;
}
pr_err("%s: Could not find signal %s\n", __func__, muxname);
return -ENODEV;
}
@ -234,6 +232,8 @@ int __init omap_mux_get_by_name(const char *muxname,
return mux_mode;
}
pr_err("%s: Could not find signal %s\n", __func__, muxname);
return -ENODEV;
}
@ -739,8 +739,9 @@ static void __init omap_mux_dbg_create_entry(
list_for_each_entry(e, &partition->muxmodes, node) {
struct omap_mux *m = &e->mux;
(void)debugfs_create_file(m->muxnames[0], S_IWUSR, mux_dbg_dir,
m, &omap_mux_dbg_signal_fops);
(void)debugfs_create_file(m->muxnames[0], S_IWUSR | S_IRUGO,
mux_dbg_dir, m,
&omap_mux_dbg_signal_fops);
}
}

1
arch/arm/mach-pxa/raumfeld.c
View File

@ -505,6 +505,7 @@ static struct w1_gpio_platform_data w1_gpio_platform_data = {
.pin = GPIO_ONE_WIRE,
.is_open_drain = 0,
.enable_external_pullup = w1_enable_external_pullup,
.ext_pullup_enable_pin = -EINVAL,
};
struct platform_device raumfeld_w1_gpio_device = {

36
arch/arm/mach-s5pv210/clock.c
View File

@ -214,11 +214,6 @@ static struct clk clk_pcmcdclk2 = {
.name = "pcmcdclk",
};
static struct clk dummy_apb_pclk = {
.name = "apb_pclk",
.id = -1,
};
static struct clk *clkset_vpllsrc_list[] = {
[0] = &clk_fin_vpll,
[1] = &clk_sclk_hdmi27m,
@ -305,18 +300,6 @@ static struct clk_ops clk_fout_apll_ops = {
static struct clk init_clocks_off[] = {
{
.name = "dma",
.devname = "dma-pl330.0",
.parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 3),
}, {
.name = "dma",
.devname = "dma-pl330.1",
.parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 4),
}, {
.name = "rot",
.parent = &clk_hclk_dsys.clk,
.enable = s5pv210_clk_ip0_ctrl,
@ -573,6 +556,20 @@ static struct clk clk_hsmmc3 = {
.ctrlbit = (1<<19),
};
static struct clk clk_pdma0 = {
.name = "pdma0",
.parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 3),
};
static struct clk clk_pdma1 = {
.name = "pdma1",
.parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 4),
};
static struct clk *clkset_uart_list[] = {
[6] = &clk_mout_mpll.clk,
[7] = &clk_mout_epll.clk,
@ -1075,6 +1072,8 @@ static struct clk *clk_cdev[] = {
&clk_hsmmc1,
&clk_hsmmc2,
&clk_hsmmc3,
&clk_pdma0,
&clk_pdma1,
};
/* Clock initialisation code */
@ -1333,6 +1332,8 @@ static struct clk_lookup s5pv210_clk_lookup[] = {
CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
CLKDEV_INIT("s5pv210-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
CLKDEV_INIT("s5pv210-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0),
CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1),
};
void __init s5pv210_register_clocks(void)
@ -1361,6 +1362,5 @@ void __init s5pv210_register_clocks(void)
for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
s3c_disable_clocks(clk_cdev[ptr], 1);
s3c24xx_register_clock(&dummy_apb_pclk);
s3c_pwmclk_init();
}

2
arch/arm/mach-s5pv210/mach-goni.c
View File

@ -845,7 +845,7 @@ static struct fimc_source_info goni_camera_sensors[] = {
.mux_id = 0,
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
.bus_type = FIMC_BUS_TYPE_ITU_601,
.fimc_bus_type = FIMC_BUS_TYPE_ITU_601,
.board_info = &noon010pc30_board_info,
.i2c_bus_num = 0,
.clk_frequency = 16000000UL,

1
arch/arm/mach-shmobile/board-marzen.c
View File

@ -32,6 +32,7 @@
#include <linux/smsc911x.h>
#include <linux/spi/spi.h>
#include <linux/spi/sh_hspi.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/usb/otg.h>

2
arch/arm/mach-spear3xx/spear3xx.c
View File

@ -14,7 +14,7 @@
#define pr_fmt(fmt) "SPEAr3xx: " fmt
#include <linux/amba/pl022.h>
#include <linux/amba/pl08x.h>
#include <linux/amba/pl080.h>
#include <linux/io.h>
#include <plat/pl080.h>
#include <mach/generic.h>

5
arch/arm/mm/dma-mapping.c
View File

@ -342,6 +342,7 @@ static int __init atomic_pool_init(void)
{
struct dma_pool *pool = &atomic_pool;
pgprot_t prot = pgprot_dmacoherent(pgprot_kernel);
gfp_t gfp = GFP_KERNEL | GFP_DMA;
unsigned long nr_pages = pool->size >> PAGE_SHIFT;
unsigned long *bitmap;
struct page *page;
@ -361,8 +362,8 @@ static int __init atomic_pool_init(void)
ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page,
atomic_pool_init);
else
ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot,
&page, atomic_pool_init);
ptr = __alloc_remap_buffer(NULL, pool->size, gfp, prot, &page,
atomic_pool_init);
if (ptr) {
int i;

2
arch/arm/net/bpf_jit_32.c
View File

@ -576,7 +576,7 @@ load_ind:
/* x = ((*(frame + k)) & 0xf) << 2; */
ctx->seen |= SEEN_X | SEEN_DATA | SEEN_CALL;
/* the interpreter should deal with the negative K */
if (k < 0)
if ((int)k < 0)
return -1;
/* offset in r1: we might have to take the slow path */
emit_mov_i(r_off, k, ctx);

7
arch/arm/plat-orion/addr-map.c
View File

@ -157,9 +157,12 @@ void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i));
/*
* Chip select enabled?
* We only take care of entries for which the chip
* select is enabled, and that don't have high base
* address bits set (devices can only access the first
* 32 bits of the memory).
*/
if (size & 1) {
if ((size & 1) && !(base & 0xF)) {
struct mbus_dram_window *w;
w = &orion_mbus_dram_info.cs[cs++];

2
arch/arm/plat-spear/Kconfig
View File

@ -10,7 +10,7 @@ choice
config ARCH_SPEAR13XX
bool "ST SPEAr13xx with Device Tree"
select ARCH_HAVE_CPUFREQ
select ARCH_HAS_CPUFREQ
select ARM_GIC
select CPU_V7
select GPIO_SPEAR_SPICS

1
arch/arm64/Kconfig
View File

@ -9,7 +9,6 @@ config ARM64
select CLONE_BACKWARDS
select COMMON_CLK
select GENERIC_CLOCKEVENTS
select GENERIC_HARDIRQS_NO_DEPRECATED
select GENERIC_IOMAP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW

11
arch/arm64/Kconfig.debug
View File

@ -6,17 +6,6 @@ config FRAME_POINTER
bool
default y
config DEBUG_ERRORS
bool "Verbose kernel error messages"
depends on DEBUG_KERNEL
help
This option controls verbose debugging information which can be
printed when the kernel detects an internal error. This debugging
information is useful to kernel hackers when tracking down problems,
but mostly meaningless to other people. It's safe to say Y unless
you are concerned with the code size or don't want to see these
messages.
config DEBUG_STACK_USAGE
bool "Enable stack utilization instrumentation"
depends on DEBUG_KERNEL

1
arch/arm64/configs/defconfig
View File

@ -82,4 +82,3 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_INFO=y
# CONFIG_FTRACE is not set
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_DEBUG_ERRORS=y

2
arch/arm64/include/asm/ucontext.h
View File

@ -22,7 +22,7 @@ struct ucontext {
stack_t uc_stack;
sigset_t uc_sigmask;
/* glibc uses a 1024-bit sigset_t */
__u8 __unused[(1024 - sizeof(sigset_t)) / 8];
__u8 __unused[1024 / 8 - sizeof(sigset_t)];
/* last for future expansion */
struct sigcontext uc_mcontext;
};

2
arch/arm64/kernel/arm64ksyms.c
View File

@ -40,7 +40,9 @@ EXPORT_SYMBOL(__copy_to_user);
EXPORT_SYMBOL(__clear_user);
/* bitops */
#ifdef CONFIG_SMP
EXPORT_SYMBOL(__atomic_hash);
#endif
/* physical memory */
EXPORT_SYMBOL(memstart_addr);

1
arch/arm64/kernel/signal32.c
View File

@ -549,7 +549,6 @@ int compat_setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs)
{
struct compat_rt_sigframe __user *frame;
compat_stack_t stack;
int err = 0;
frame = compat_get_sigframe(ka, regs, sizeof(*frame));

2
arch/avr32/Kconfig
View File

@ -7,7 +7,7 @@ config AVR32
select HAVE_OPROFILE
select HAVE_KPROBES
select HAVE_GENERIC_HARDIRQS
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_ATOMIC64
select HARDIRQS_SW_RESEND

2
arch/blackfin/Kconfig
View File

@ -33,7 +33,7 @@ config BLACKFIN
select ARCH_HAVE_CUSTOM_GPIO_H
select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_UID16
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select ARCH_WANT_IPC_PARSE_VERSION
select HAVE_GENERIC_HARDIRQS
select GENERIC_ATOMIC64

2
arch/cris/Kconfig
View File

@ -43,7 +43,7 @@ config CRIS
select GENERIC_ATOMIC64
select HAVE_GENERIC_HARDIRQS
select HAVE_UID16
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_IRQ_SHOW
select GENERIC_IOMAP

Some files were not shown because too many files have changed in this diff Show More