atl1c: remove REG_PHY_STATUS

this register is used for l1e(dev=1026)
l1c/l1d/l2cb don't use it.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Huang, Xiong 2012-04-25 20:27:09 +00:00 committed by David S. Miller
parent c165541efc
commit 8f33ab9134
2 changed files with 0 additions and 9 deletions

View File

@ -293,13 +293,6 @@ int atl1c_phy_power_saving(struct atl1c_hw *hw);
#define MDIO_AP_EN 0x10000000
#define MDIO_WAIT_TIMES 10
/* MII PHY Status Register */
#define REG_PHY_STATUS 0x1418
#define PHY_GENERAL_STATUS_MASK 0xFFFF
#define PHY_STATUS_RECV_ENABLE 0x0001
#define PHY_OE_PWSP_STATUS_MASK 0x07FF
#define PHY_OE_PWSP_STATUS_SHIFT 16
#define PHY_STATUS_LPW_STATE 0x80000000
/* BIST Control and Status Register0 (for the Packet Memory) */
#define REG_BIST0_CTRL 0x141c
#define BIST0_NOW 0x1

View File

@ -699,11 +699,9 @@ static void atl1c_set_mac_type(struct atl1c_hw *hw)
static int atl1c_setup_mac_funcs(struct atl1c_hw *hw)
{
u32 phy_status_data;
u32 link_ctrl_data;
atl1c_set_mac_type(hw);
AT_READ_REG(hw, REG_PHY_STATUS, &phy_status_data);
AT_READ_REG(hw, REG_LINK_CTRL, &link_ctrl_data);
hw->ctrl_flags = ATL1C_INTR_MODRT_ENABLE |