mirror of
https://github.com/torvalds/linux.git
synced 2024-11-26 06:02:05 +00:00
mfd: devicetree: bindings: Add Qualcomm RPM regulator subnodes
Add the regulator subnodes to the Qualcomm RPM MFD device tree bindings. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
This commit is contained in:
Bjorn Andersson
Lee Jones
parent
bdb01f7823
commit
8d2f1a9d36
@ -32,16 +32,6 @@ frequencies.
|
||||
Value type: <string-array>
|
||||
Definition: must be the three strings "ack", "err" and "wakeup", in order
|
||||
|
||||
- #address-cells:
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: must be 1
|
||||
|
||||
- #size-cells:
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: must be 0
|
||||
|
||||
- qcom,ipc:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
@ -53,6 +43,188 @@ frequencies.
|
||||
- u32 representing the ipc bit within the register
|
||||
|
||||
|
||||
= SUBNODES
|
||||
|
||||
The RPM exposes resources to its subnodes. The below bindings specify the set
|
||||
of valid subnodes that can operate on these resources.
|
||||
|
||||
== Regulators
|
||||
|
||||
Regulator nodes are identified by their compatible:
|
||||
|
||||
- compatible:
|
||||
Usage: required
|
||||
Value type: <string>
|
||||
Definition: must be one of:
|
||||
"qcom,rpm-pm8058-regulators"
|
||||
"qcom,rpm-pm8901-regulators"
|
||||
"qcom,rpm-pm8921-regulators"
|
||||
|
||||
- vdd_l0_l1_lvs-supply:
|
||||
- vdd_l2_l11_l12-supply:
|
||||
- vdd_l3_l4_l5-supply:
|
||||
- vdd_l6_l7-supply:
|
||||
- vdd_l8-supply:
|
||||
- vdd_l9-supply:
|
||||
- vdd_l10-supply:
|
||||
- vdd_l13_l16-supply:
|
||||
- vdd_l14_l15-supply:
|
||||
- vdd_l17_l18-supply:
|
||||
- vdd_l19_l20-supply:
|
||||
- vdd_l21-supply:
|
||||
- vdd_l22-supply:
|
||||
- vdd_l23_l24_l25-supply:
|
||||
- vdd_ncp-supply:
|
||||
- vdd_s0-supply:
|
||||
- vdd_s1-supply:
|
||||
- vdd_s2-supply:
|
||||
- vdd_s3-supply:
|
||||
- vdd_s4-supply:
|
||||
Usage: optional (pm8058 only)
|
||||
Value type: <phandle>
|
||||
Definition: reference to regulator supplying the input pin, as
|
||||
described in the data sheet
|
||||
|
||||
- lvs0_in-supply:
|
||||
- lvs1_in-supply:
|
||||
- lvs2_in-supply:
|
||||
- lvs3_in-supply:
|
||||
- mvs_in-supply:
|
||||
- vdd_l0-supply:
|
||||
- vdd_l1-supply:
|
||||
- vdd_l2-supply:
|
||||
- vdd_l3-supply:
|
||||
- vdd_l4-supply:
|
||||
- vdd_l5-supply:
|
||||
- vdd_l6-supply:
|
||||
- vdd_s0-supply:
|
||||
- vdd_s1-supply:
|
||||
- vdd_s2-supply:
|
||||
- vdd_s3-supply:
|
||||
- vdd_s4-supply:
|
||||
Usage: optional (pm8901 only)
|
||||
Value type: <phandle>
|
||||
Definition: reference to regulator supplying the input pin, as
|
||||
described in the data sheet
|
||||
|
||||
- vdd_l1_l2_l12_l18-supply:
|
||||
- vdd_l3_l15_l17-supply:
|
||||
- vdd_l4_l14-supply:
|
||||
- vdd_l5_l8_l16-supply:
|
||||
- vdd_l6_l7-supply:
|
||||
- vdd_l9_l11-supply:
|
||||
- vdd_l10_l22-supply:
|
||||
- vdd_l21_l23_l29-supply:
|
||||
- vdd_l24-supply:
|
||||
- vdd_l25-supply:
|
||||
- vdd_l26-supply:
|
||||
- vdd_l27-supply:
|
||||
- vdd_l28-supply:
|
||||
- vdd_ncp-supply:
|
||||
- vdd_s1-supply:
|
||||
- vdd_s2-supply:
|
||||
- vdd_s4-supply:
|
||||
- vdd_s5-supply:
|
||||
- vdd_s6-supply:
|
||||
- vdd_s7-supply:
|
||||
- vdd_s8-supply:
|
||||
- vin_5vs-supply:
|
||||
- vin_lvs1_3_6-supply:
|
||||
- vin_lvs2-supply:
|
||||
- vin_lvs4_5_7-supply:
|
||||
Usage: optional (pm8921 only)
|
||||
Value type: <phandle>
|
||||
Definition: reference to regulator supplying the input pin, as
|
||||
described in the data sheet
|
||||
|
||||
The regulator node houses sub-nodes for each regulator within the device. Each
|
||||
sub-node is identified using the node's name, with valid values listed for each
|
||||
of the pmics below.
|
||||
|
||||
pm8058:
|
||||
l0, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15,
|
||||
l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, s0, s1, s2, s3, s4,
|
||||
lvs0, lvs1, ncp
|
||||
|
||||
pm8901:
|
||||
l0, l1, l2, l3, l4, l5, l6, s0, s1, s2, s3, s4, lvs0, lvs1, lvs2, lvs3,
|
||||
mvs
|
||||
|
||||
pm8921:
|
||||
s1, s2, s3, s4, s7, s8, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
|
||||
l12, l14, l15, l16, l17, l18, l21, l22, l23, l24, l25, l26, l27, l28,
|
||||
l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch,
|
||||
ncp
|
||||
|
||||
The content of each sub-node is defined by the standard binding for regulators -
|
||||
see regulator.txt - with additional custom properties described below:
|
||||
|
||||
=== Switch-mode Power Supply regulator custom properties
|
||||
|
||||
- bias-pull-down:
|
||||
Usage: optional
|
||||
Value type: <empty>
|
||||
Definition: enable pull down of the regulator when inactive
|
||||
|
||||
- qcom,switch-mode-frequency:
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: Frequency (Hz) of the switch-mode power supply;
|
||||
must be one of:
|
||||
19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
|
||||
2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
|
||||
1480000, 1370000, 1280000, 1200000
|
||||
|
||||
- qcom,force-mode:
|
||||
Usage: optional (default if no other qcom,force-mode is specified)
|
||||
Value type: <u32>
|
||||
Defintion: indicates that the regulator should be forced to a
|
||||
particular mode, valid values are:
|
||||
QCOM_RPM_FORCE_MODE_NONE - do not force any mode
|
||||
QCOM_RPM_FORCE_MODE_LPM - force into low power mode
|
||||
QCOM_RPM_FORCE_MODE_HPM - force into high power mode
|
||||
QCOM_RPM_FORCE_MODE_AUTO - allow regulator to automatically
|
||||
select its own mode based on
|
||||
realtime current draw, only for:
|
||||
pm8921 smps and ftsmps
|
||||
|
||||
- qcom,power-mode-hysteretic:
|
||||
Usage: optional
|
||||
Value type: <empty>
|
||||
Definition: select that the power supply should operate in hysteretic
|
||||
mode, instead of the default pwm mode
|
||||
|
||||
=== Low-dropout regulator custom properties
|
||||
|
||||
- bias-pull-down:
|
||||
Usage: optional
|
||||
Value type: <empty>
|
||||
Definition: enable pull down of the regulator when inactive
|
||||
|
||||
- qcom,force-mode:
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Defintion: indicates that the regulator should not be forced to any
|
||||
particular mode, valid values are:
|
||||
QCOM_RPM_FORCE_MODE_NONE - do not force any mode
|
||||
QCOM_RPM_FORCE_MODE_LPM - force into low power mode
|
||||
QCOM_RPM_FORCE_MODE_HPM - force into high power mode
|
||||
QCOM_RPM_FORCE_MODE_BYPASS - set regulator to use bypass
|
||||
mode, i.e. to act as a switch
|
||||
and not regulate, only for:
|
||||
pm8921 pldo, nldo and nldo1200
|
||||
|
||||
=== Negative Charge Pump custom properties
|
||||
|
||||
- qcom,switch-mode-frequency:
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: Frequency (Hz) of the swith mode power supply;
|
||||
must be one of:
|
||||
19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
|
||||
2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
|
||||
1480000, 1370000, 1280000, 1200000
|
||||
|
||||
= EXAMPLE
|
||||
|
||||
#include <dt-bindings/mfd/qcom-rpm.h>
|
||||
@ -65,7 +237,28 @@ frequencies.
|
||||
interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
|
||||
interrupt-names = "ack", "err", "wakeup";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
regulators {
|
||||
compatible = "qcom,rpm-pm8921-regulators";
|
||||
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
|
||||
|
||||
s1 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
|
||||
bias-pull-down;
|
||||
|
||||
qcom,switch-mode-frequency = <3200000>;
|
||||
};
|
||||
|
||||
pm8921_s4: s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
qcom,switch-mode-frequency = <1600000>;
|
||||
bias-pull-down;
|
||||
|
||||
qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user